Advanced activation of persulfate by polymeric g-C3N4 based photocatalysts for environmental remediation: A review

Unlocking enhanced photocatalytic power: Donor-acceptor synergy in non-metallic g-C3N4 hollow nanospheres

Selecting safe, non-toxic, and non-metallic semiconductor materials that facilitate the degradation of pollutants in water stands out as an optimal approach to combat environmental pollution. Herein, graphitic carbon nitride (g-C3N4)-based hollow nanospheres nonmetallic photocatalyst modified with covalent organic framework materials named TpMA, based on 1, 3, 5-trimethylchloroglucuronide (Tp) and melamine (MA), was successfully synthesized (abbreviated as CNTP). The ordered electron donor-acceptor structure inherent in TpMA contributed to enhancing the transport efficiency of photogenerated carriers in CNTP. The CNTP photocatalysts exhibited excellent performance in degrading rhodamine B and tetracycline in visible light, with optimal degradation rates reached more than 90% in 60 and 80 min, respectively, which were 5.3 and 3.0 times higher than those of pure CNNS. The increased photocatalytic efficiency observed in CNTP composites could be traced back to the covalently connection between the two molecules, forming a π-conjugated system that facilitated the separative efficiency of photogenerated electron-hole pairs and intensified the utilization of visible light. This study provided a new means to design and fabricate highly efficient and environmentally friendly non-metallic photocatalytic materials.

Photocatalytic activation of peroxydisulfate by UV-LED through rGO/g-C3N4/SiO2 nanocomposite for ciprofloxacin removal: Mineralization, toxicity, degradation pathways, and application for real matrix

If trace amounts of antibiotics remain in the environment, they can lead to microbial pathogens becoming resistant to antibiotics and putting ecosystem health at risk. For instance, ciprofloxacin (CIP) can be found in surface and ground waters, suggesting that conventional water treatment technologies are ineffective at removing it. Now, a rGO/g-C3N4/SiO2 nanocomposite was synthesized in this study to activate peroxydisulfate (PDS) under UVA-LED irradiation. UVA-LED/rGO-g-C3N4-SiO2/PDS system performance was evaluated using Ciprofloxacin as an antibiotic. Particularly, rGO/g-C3N4/SiO2 showed superior catalytic activity for PDS activation to remove CIP. Operational variables, reactive species determination, and mechanisms were investigated. 0.85 mM PDS and 0.3 g/L rGO/g-C3N4/SiO2 eliminated 99.63% of CIP in 35 min and mineralized 59.78% in 100 min at pH = 6.18. By scavenging free radicals, bicarbonate ions inhibit CIP degradation. According to the trapping experiments, superoxide (O2•-) was the main active species rather than sulfate (SO4•-) and hydroxyl radicals (•OH). RGO/g-C3N4/SiO2 showed an excellent recyclable capability of up to six cycles. The UVA-LED/rGO-g-C3N4-SiO2/PDS system was also tested under real conditions. The system efficiency was reasonable. By calculating the synergistic factor (SF), this work highlights the benefit of combining composite, UVA-LED, and PDS. UVA-LED/rGO-g-C3N4-SiO2/PDS had also been predicted to be an eco-friendly process based on the results of the ECOSAR program. Consequently, this study provides a novel and durable nanocomposite with supreme thermal stability that effectively mitigates environmental contamination by eliminating antibiotics from wastewater.

Dimensionally Intact Construction of Ultrathin S-Scheme CuFe2O4/ZnIn2S4 Heterojunctional Photocatalysts for CO2 Photoreduction

The conversion of CO2 into carbon-neutral fuels such as methane (CH4) through selective photoreduction is highly sought after yet remains challenging due to the slow multistep proton-electron transfer processes and the formation of various C1 intermediates. This research highlights the cooperative interaction between Fe3+ and Cu2+ ions transitioning to Fe2+ and Cu+ ions, enhancing the photocatalytic conversion of CO2 to methane. We introduce an S-scheme heterojunction photocatalyst, CuFe2O4/ZnIn2S4, which demonstrates significant efficiency in CO2 methanation under light irradiation. The CuFe2O4/ZnIn2S4 heterojunction forms an internal electric field that aids in the mobility and separation of exciton carriers under a wide solar spectrum for exceptional photocatalytic performance. Remarkably, the optimal CuFe2O4/ZnIn2S4 heterojunction system achieved an approximately 68-time increase in CO2 conversion compared with ZnIn2S4 and CuFe2O4 nanoparticles using only pure water, with nearly complete CO selectivity and yields of CH4 and CO reaching 172.5 and 202.4 μmol g-1 h-1, respectively, via a 2-electron oxygen reduction reaction (ORR) process. The optimally designed CuFe2O4/ZnIn2S4 heterojunctional system achieved approximately 96% conversion of BA and 98.5% selectivity toward benzaldehyde (BAD). Additionally, this photocatalytic system demonstrated excellent cyclic stability and practical applicability. The photogenerated electrons in the CuFe2O4 conduction band enhance the reduction of Fe3+/Cu2+ to Fe2+/Cu+, creating a microenvironment conducive to CO2 reduction to CO and CH4. Simultaneously, the appearance of holes in the ZnIn2S4 valence band facilitates water oxidation to O2. The synergistic function within the CuFe2O4/ZnIn2S4 heterojunction plays a pivotal role in facilitating charge transfer, accelerating water oxidation, and thereby enhancing CO2 reduction kinetics. This study offers valuable insights and a strategic framework for designing efficient S-scheme heterojunctions aimed at achieving carbon neutrality through solar fuel production.

Enhanced tetracycline degradation by novel Mn-FeOOH/CNNS photocatalysts in a visible-light-driven photocatalysis coupled peroxydisulfate system

Recently, photocatalysis combined peroxydisulfate activation under visible light (PC-PDS/Vis) was developed as a promising technology for removing antibiotics in water. Herein, Mn doped FeOOH (Mn-FeOOH) nanoclusters were grown in-situ on the surface of graphitic carbon nitride nanosheets (CNNS) using a wet chemical method, which served as a visible-light-driven photocatalyst for peroxydisulfate (PDS) activation. Photovoltaic property characterizations revealed that Mn-FeOOH/CNNS owned superior light capture ability and carrier separation efficiency. According to DFT calculations, the synergistic effect between Mn and Fe species was proved to enhance the adsorption and activation of PDS. 99.7% of tetracycline (TC) was rapidly removed in 50 minutes in the PC-PDS/Vis system. In addition, Mn-FeOOH/CNNS exhibited high recycling stability with low iron leaching, attributed to the interaction between Mn-FeOOH clusters and carbon species. Quenching experiments and electron spin resonance (ESR) tests unveiled that •O2- played a significant role in TC removal, while •OH and SO4•- acted as additional roles contributing to the overall process. These findings given a new strategy for antibiotics degradation by photocatalysis, offering deeper insights for the advancement of sustainable and cutting-edge wastewater treatment technologies.

Robust cooperative of cadmium sulfide with highly ordered hollow microstructure coordination polymers for regulating the photocatalytic performance

Accurately controlling and achieving selective reactivity at difficult-to-access reaction sites in organic molecules is challenging owing to the similar local and electronic environments of multiple reaction sites. In this work, we regulated multiple reaction sites in a highly selective and active manner using cobalt coordination polymers (Co-CP) 1 and 1a with various particle sizes and morphologies ranging from large granular to ordered hollow hemispheres by introducing sodium dodecyl sulfate (SDS) as a surfactant. The size and morphology of the catalysts could be tuned by controlling the amount of SDS. An SDS concentration of 0.03 mmol generated 1a having a highly ordered hollow hemispherical microstructure with a well-defined platform as a pre-made building unit. Cadmium sulfide (CdS), as a typical photocatalyst, was subsequently uniformly anchored in-situ on the premade building unit 1a to produce CdS@1a composites, that inherited the originally ordered hollow hemispherical microstructure while integrating CdS as well-dispersed catalytic active sites. Furthermore, the well-established CdS@1a composites were used as photocatalysts in selective oxidation reactions under air atmosphere with blue irradiation. The CdS0.109@1a composite with unique structural characteristics, including uniformly distributed and easily accessible catalytic sites and excellent photoelectrochemical performance, served as a highly efficient heterogeneous photocatalyst for promoting the selective oxidation of sulfides to sulfoxides as the sole products. This work presents an approach for fabricating CPs as premade building units that function as well-defined platforms for integration with photocatalysts, enabling tuning of the structure-selectivity-activity relationships.

Peroxymonosulfate enhanced photocatalytic degradation of organic dye by metal-free TpTt-COF under visible light irradiation

Recently, the activation of persulfate (PDS) by non-metallic photocatalysts under visible light has attracted significant interest in applications in environmental remediation. This study presents a pioneering investigation into the combined application of the TpTt-COF and PMS for visible light degradation of organic dyes. Synthesized orange TpTt-COF monomers exhibit exceptional crystallinity, a 2D structure, and notable stability in harsh conditions. The broad visible light absorption around a wavelength of 708 nm. The TpTt-COF emerges as a promising candidate for photocatalytic dye degradation. The study addresses high charge recombination in the TpTt-COF, highlighting the crucial role of its electron donor and acceptor for the PMS activation. Comparative analyses against traditional photocatalytic materials, such as the metal-free carbon-based material g-C3N4 and transition metal-containing TiO2, demonstrate TpTt-COF's superior performance, generating diverse free radicals. In simulated experiments, the TpTt-COF's degradation rate surpasses PMS-combined g-C3N4 by 13.9 times. and 1.6 times higher than the TpTt-COF alone. Remarkably, the TpTt-COF maintains high activity under harsh environments. Investigations into the degradation mechanism and the TpTt-COF's reusability reveal its efficiency and stability. Under visible light, TpTt-COF facilitates efficient electron-hole separation. Combining the TpTt-COF with PMS produces various radicals, ensuring effective separation and a synergistic effect. Radical quenching experiments confirm the pivotal role of O2-· radicals, while ·OH and SO4-· radicals intensify the degradation. After five cycles, TpTt-COF maintains an impressive 83.2% degradation efficiency. This study introduces an efficient photocatalytic system mediated by PMS and valuable insights into governing mechanisms for organic pollutant degradation in water environments.

Fucoidan-coated cotton dressing functionalized with biomolecules capped silver nanoparticles (LB-Ag NPs-FN-OCG) for rapid healing therapy of infected wounds

The colonization of pathogenic microbes poses a significant clinical barrier that hinders the physiological wound-healing process. Addressing this challenge, we developed a novel wound dressing using a modified cotton gauze dressing coated with fucoidan and functionalized with silver nanoparticles (LB-Ag NPs-FN-OCG) for the rapid treatment of infected wounds. Firstly, phytochemical-capped LB-Ag NPs were synthesized and characterized using high performance liquid chromatography (HPLC), transmission electron microscopy (TEM), and zeta potential analysis. Secondly, different concentrations of LB-Ag NPs (0.1%-1%) were functionalized into FN-OCG to identify appropriate concentrations that were non-toxic with superior antibacterial activities. Screening assays, including antibacterial, hemolysis, chick chorioallantoic membrane (CAM) assay, and cytotoxicity assay, revealed that LB-Ag NPs (0.5%)-FN-OCG were non-toxic and demonstrated greater efficiency in inhibiting bacterial pathogens (Escherichia coli, Salmonella enterica, Staphylococcus aureus, and Listeria monocytogenes) and promoting fibroblast cell (NIH3T3) migration. In vivo assays revealed that LB-Ag NPs (0.5%)-FN-OCG treatment exhibited excellent wound healing activity (99.73 ± 0.01%) compared to other treatments by inhibiting bacterial colonization, maintaining the blood parameters, developing granulation tissue, new blood vessels, and collagen deposition. Overall, this study highlights that LB-Ag NPs (0.5%)-FN-OCG serve as a antibacterial wound dressing for infected wound healing applications.

A self-driven solar coupling system with TiO2@MXene cathode for effectively eliminating uranium and organics from complex wastewater accompanying with electricity generation

The inevitable organic matters in radioactive wastewater and contaminated waters pose great challenge in uranium recycling by traditional techniques. Here, a self-driven solar coupling system (SSCS), which was assembled by a TiO2 @MXene/CF cathode and a monolithic photoanode, was proposed for synergistically recycling uranium and degrading organics from complex radioactive wastewater, combining with electricity production. The TiO2 @MXene/CF was prepared via a simple annealing process with in-situ derived TiO2 nanoparticles decorated Ti3C2 MXene coated on carbon felt (CF). Under sunlight illumination, the photoanode captured electrons of organics, and drove electrons to the TiO2 @MXene/CF, which exhibited an exceptional UO22+ adsorption and reduction capacity because TiO2 nanoparticles provided plenty of surface hydroxyl groups for UO22+ adsorption, and the unique two-dimensional MXene facilitated the charge transfer. The SSCS with TiO2 @MXene/CF removed almost 100% UO22+ and organics with rate constants of ∼21 and ∼6.9 times those of the system with CF, accompanying with excellent power output (∼1000 μW·cm-2). The fixed uranium on TiO2 @MXene/CF was effectively reduced into insoluble UO2 (91.1%), and no obvious decay was observed after 15 repeated uses. This study proposes a multi-functional and easy-operated way for remediating radioactive wastewater and contaminated waters, and gives valuable insights in designing cathode materials for uranium reduction.

Valorization of Field-Spent Granular Activated Carbon as Heterogeneous Ozonation Catalyst for Water Treatment

Developing sustainable cost-effective strategies for valorization of field-spent granular activated carbon (s-GAC) from industrial water treatment has gained much interest. Here, we report a cost-effective strategy for the regeneration of s-GAC as an adsorbent in a large-scale drinking water treatment plant and used as an efficient and durable ozonation catalyst in water. To achieve this, a series of samples is prepared by subjecting s-GAC to thermally controlled combustion treatments with and without pyrolysis. The catalytic performance of the optimized sample is evaluated for oxalic acid degradation as the model pollutant under batch (>15 h) and continuous flow operations (>200 h). The partially deactivated catalyst upon reuse is restored by thermal treatment. Electron paramagnetic resonance and selective quenching experiments show the formation of singlet oxygen (1O2) during catalytic ozonation. The GAC-ozonation catalyst is efficient to minimize the formation of chlorinated disinfection by-products like trihalomethanes and haloacetic acids in an urban wastewater effluent.

Synergistic activation of P and orbital coupling effect for ultra-sensitive and selective electrochemical detection of Cd(II) over Fe-doped CoP

Despite significant advancements in the detection of cadmium (Cd(II)) based on nanomaterial adsorbability, limited research has been conducted on ultra-sensitive and selective detection mechanisms, resulting in a lack of guidance for designing efficient interface materials to detect Cd(II). Herein, reductive Fe doping on CoP facilitates an efficient Fe-Co-P electron transfer path, which renders P the electron-rich site and subsequently splits a new orbital peak that matches with that of Cd(II) for excellent electrochemical performance. The sensitivity of Cd(II) was remarkably up to 109.75 μA μM-1 on the Fe-CoP modified electrode with excellent stability and repeatability, surpassing previously reported findings. Meanwhile, the electrode exhibits exceptional selectivity towards Cd(II) ions compared to some bivalent heavy metal ions (HMIs). Moreover, X-ray absorption fine structure (XAFS) analysis reveals the interaction between P and Cd(II), which is further verified via density functional theory (DFT) calculation with the new hybrid peaks resulting from the splitting peak of P atoms coupled with the orbital energy level of Cd(II). Generally, doping engineering for specific active sites and regulation of orbital electrons not only provides valuable insights for the subsequent regulation of electronic configuration but also lays the foundation for customizing highly sensitive and selectivity sensors.

Strain-Induced Surface Interface Dual Polarization Constructs PML-Cu/Bi12O17Br2 High-Density Active Sites for CO2 Photoreduction

The insufficient active sites and slow interfacial charge transfer of photocatalysts restrict the efficiency of CO2 photoreduction. The synchronized modulation of the above key issues is demanding and challenging. Herein, strain-induced strategy is developed to construct the Bi-O-bonded interface in Cu porphyrin-based monoatomic layer (PML-Cu) and Bi12O17Br2 (BOB), which triggers the surface interface dual polarization of PML-Cu/BOB (PBOB). In this multi-step polarization, the built-in electric field formed between the interfaces induces the electron transfer from conduction band (CB) of BOB to CB of PML-Cu and suppresses its reverse migration. Moreover, the surface polarization of PML-Cu further promotes the electron converge in Cu atoms. The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB, significantly promoting the adsorption and activation of CO2 and CO desorption. The conversion rate of CO2 photoreduction to CO for PBOB can reach 584.3 μmol g-1, which is 7.83 times higher than BOB and 20.01 times than PML-Cu. This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.

Ag-loaded BiFeO3/CuS heterostructured based composite: an efficient photocatalyst for removal of antibiotics and antibacterial activities

The performance of advanced materials in environmental applications using green energy is the tremendous interest among researchers. The visible light responsive BiFeO3 (BFO), BiFeO3/CuS (BFOC), and Ag-loaded BiFeO3/CuS (Ag-BFOC) heterostructures have been synthesized by reflux method followed by hydrothermal and wetness impregnation method. These synthesized composites are well characterized through X-ray diffraction, UV diffuse reflectance spectroscopy, scanning electron microscope, and Fourier transfer infrared spectroscopy techniques. Compared with BFO and BFOC, Ag-BFOC exhibits the highest photocatalytic performance towards the degradation of antibiotics ciprofloxacin (76%) within 120-min time and also showed better antibacterial performance towards gram-negative (Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii) bacteria. Moreover, the novelty of the present work is the addition of CuS on the surface of BiFeO3 from heterojunction type II and facilitates the electron-hole channelization at the interfaces between BiFeO3 and CuS. Again, the loading of Ag on BiFeO3/CuS helps in shifting the absorption band towards the red end, is eligible to absorb more sunlight due to surface plasmon resonance effect, improves the separation efficiency of photo-generated charge carriers, and enhances the photocatalytic degradation of ciprofloxacin. The antibacterial property of Ag gives a best result towards antimicrobial activity. The prepared composites have proved their durability and stability by four successive cycles and prove the versatility of the composite.

Flower-like 3D MoS2 microsphere/2D C3N4 nanosheet composite for highly sensitive electrochemical sensing of nitrite

Nitrite pollution poses a serious threat to human health and the environment. In this study, a reliable and selective electrochemical (EC) sensor was developed for the quantitative determination of nitrite by combining flower-like three-dimensional (3D) MoS2 microspheres with two-dimensional (2D) C3N4 nanosheets. Benefiting from the synergistic effects of MoS2 and C3N4, the 3D MoS2/2D C3N4 nanocomposite displayed numerous active sites, a 3D mesoporous structure, high conductivity and excellent catalytic activity. The 3D MoS2/2D C3N4-modified glassy carbon electrode (GCE) exhibited a superior electrocatalytic activity toward nitrite oxidation, with a wider linear detection range (0.1-1100 μM), a lower detection limit (LOD) (0.065 μM, S/N = 3), outstanding stability, remarkable reproducibility and strong selectivity. Furthermore, the nitrite EC sensor was successfully applied to detect actual food and environmental samples involving sausage, pickled vegetables, river water and tap water, thus demonstrating the potential of the prepared 3D MoS2/2D C3N4/GCE for food analysis and environmental monitoring.

Prism-like integrated Bi2WO6 with Ag-CuBi2O4 on carbon nanotubes (CNTs) as an efficient and robust S-scheme interfacial charge transfer photocatalyst for the removal of organic pollutants from wastewater

Photocatalytic hybrid carbon nanotubes (CNTs)-mediated Ag-CuBi2O4/Bi2WO6 photocatalyst was fabricated using a hydrothermal technique to effectively eliminate organic pollutants from wastewater. The as-prepared samples were characterized via Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction patterns (XRD), high-resolution transmission electron microscope (HR-TEM), UV-vis Diffuse Reflectance spectrum (UV-Vis DRS), and photoluminescence (PL) studies. The photocatalytic performance of fabricated pristine and hybrid composites was examined by photo-degradation of toxic dye viz. Rhodamine B (RhB) under visible light. Photo-degradation results revealed that the fabricated Ag-CuBi2O4/CNTs/Bi2WO6 semiconductor photocatalyst followed pseudo-first-order kinetics and displayed a higher photocatalytic rate, which was found to be approximately 3.33 and 2.35 times higher than the pristine CuBi2O4 and Bi2WO6 semiconductor photocatalyst, respectively. Re-cyclic results demonstrated that the formed composite owns excellent stability, even after five consecutive cycles. As per the matched Fermi level of CNTs in between Ag-CuBi2O4 and Bi2WO6, carbon nanotubes severed as electron transfer-bridge, Ag doping on CuBi2O4 surface successfully increased photon absorption all across CuBi2O4 surface. Also, it hindered the assimilation of photoinduced electron-hole pairs. The increased photocatalytic efficiency is contributed to the uniform dispersion of photo-generated electron-hole pairs via the construction of an S-scheme system. ROS trapping and ESR experiments suggested that (∙OH) and (O2-∙) were the main radical species for enhanced photo-degradation of RhB dye. The current investigation, from our perspective, highlights the new insights for the fabrication of practical CNTs-mediated S-scheme-based semiconductor photocatalyst for the resolution of environmental issues based on practical considerations.

Engineering the activity and stability of ZIF-8(Zn/Co)@g-C3N4 nanocomposites and their synergistic action in converting atmospheric CO2 into cyclic carbonates

The development of novel catalytic materials that integrate multifunctional sites has significant implications for expanding the utilization of CO2 resources. However, simultaneously achieving high activity and stability remains a formidable challenge. In this study, a series of ZIF-8(Zn/Co)@g-C3N4 nanocomposites were prepared by employing a thermo-physical compounding strategy that involved the combination of nitrogen-rich graphitic carbon nitride (g-C3N4) nanosheets with ZIF-8(ZnCo). The influences of different compositions of g-C3N4 and ZIF-8(Zn/Co) on the catalyst structure were systematically investigated. Subsequently, the catalytic activities of these nanocomposites towards the cycloaddition reaction between CO2 and epoxide were examined under different conditions. The presence of abundant Lewis base sites in g-C3N4 facilitates CO2 activation, while multiple Lewis acid sites in ZIF-8(Zn/Co) enable efficient epoxide activation. By working synergistically with a co-catalyst, tetrabutylammonium bromide (TBAB), CO2 and epoxides can be efficiently reacted to synthesize the corresponding cyclic carbonates under mild or even atmospheric pressure conditions. The catalytic reaction conditions were optimized, and both the catalyst's recycling performance and the scope of epoxides with various substituents were investigated. The integration of g-C3N4 and ZIF-8(Zn/Co) endows the catalytic material with exceptional structural stability and remarkable catalytic activity, thereby providing a new platform for highly efficient CO2 conversion.

Comparison of TiO2 and ZnO for Heterogeneous Photocatalytic Activation of the Peroxydisulfate Ion in Trimethoprim Degradation

The persulfate-based advanced oxidation process is a promising method for degrading organic pollutants. Herein, TiO2 and ZnO photocatalysts were combined with the peroxydisulfate ion (PDS) to enhance the efficiency. ZnO was significantly more efficient in PDS conversion and SO4•- generation than TiO2. For ZnO, the PDS increased the transformation rate of the trimethoprim antibiotic from 1.58 × 10-7 M s-1 to 6.83 × 10-7 M s-1. However, in the case of TiO2, the moderated positive effect was manifested mainly in O2-free suspensions. The impact of dissolved O2 and trimethoprim on PDS transformation was also studied. The results reflected that the interaction of O2, PDS, and TRIM with the surface of the photocatalyst and their competition for photogenerated charges must be considered. The effect of radical scavengers confirmed that in addition to SO4•-, •OH plays an essential role even in O2-free suspensions, and the contribution of SO4•- to the transformation is much more significant for ZnO than for TiO2. The negative impact of biologically treated domestic wastewater as a matrix was manifested, most probably because of the radical scavenging capacity of Cl- and HCO3-. Nevertheless, in the case of ZnO, the positive effect of PDS successfully overcompensates that, due to the efficient SO4•- generation. Reusability tests were performed in Milli-Q water and biologically treated domestic wastewater, and only a slight decrease in the reactivity of ZnO photocatalysts was observed.

Current approaches, and challenges on identification, remediation and potential risks of emerging plastic contaminants: A review

Plastics are widely employed in modern civilization because of their durability, mold ability, and light weight. In the recent decade, micro/nanoplastics research has steadily increased, highlighting its relevance. However, contaminating micro/nanoplastics in marine environments, terrestrial ecosystems, and biological organisms is considered a severe threat to the environmental system. Geographical distribution, migration patterns, etymologies of formation, and ecological ramifications of absorption are just a few topics covered in the scientific literature on environmental issues. Degradable solutions from material science and chemistry are needed to address the micro/nanoplastics problem, primarily to reduce the production of these pollutants and their potential effects. Removing micro/nanoplastics from their discharge points has been a central and effective way to mitigate the adverse pollution effects. In this review, we begin by discussing the hazardous effect on living beings and the identification-characterization of micro/nanoplastics. Then, we provide a summary of the existing degradation strategies, which include bio-degradation and advanced oxidation processes (AOPs), and a detailed discussion of their degradation mechanisms is also represented. Finally, a persuasive summary of the evaluated work and projections for the future of this topic is provided.

Emerging waste-to-wealth applications of fly ash for environmental remediation: A review

The considerable increase in world energy consumption owing to rising global population, intercontinental transportation and industrialization has posed numerous environmental concerns. Particularly, in order to meet the required electricity supply, thermal power plants for electricity generation are widely used in many countries. However, an annually excessive quantity of waste fly ash up to 1 billion tones was globally discarded from the combustion of various carbon-containing feedstocks in thermoelectricity plants. About half of the industrially generated fly ash is dumped into landfills and hence causing soil and water contamination. Nonetheless, fly ash still contains many valuable components and possesses outstanding physicochemical properties. Utilizing waste fly ash for producing value-added products has gained significant interests. Therefore, in this work, we reviewed the current implementation of fly ash-derived materials, namely, zeolite and geopolymer as efficient adsorbents for the environmental treatment of flue gas and polluted water. Additionally, the usage of fly ash as a catalyst support for the photodegradation of organic pollutants and reforming processes for the corresponding wastewater remediation and H₂ energy generation is thoroughly covered. In comparison with conventional carbon-based adsorbents, fly ash-derived geopolymer and zeolite materials reportedly exhibited greater heavy metal ions removal and reached the maximum adsorption capacity of about 150 mg g^-1. As a support for biogas reforming process, fly ash could enhance the activity of Ni catalyst with 96% and 97% of CO₂ and CH₄ conversions, respectively.

Accelerated radical generation from visible light driven peroxymonosulfate activation by Bi2MoO6/doped gCN S-scheme heterojunction towards Amoxicillin mineralization: Elucidation of the degradation mechanism

A novel S-scheme photocatalyst Bi₂MoO₆ @doped gCN (BMO@CN) was prepared through a facile microwave (MW) assisted hydrothermal process and further employed to degrade Amoxicillin (AMOX), by peroxymonosulfate (PMS) activation with visible light (Vis) irradiation. The reduction in electronic work functions of the primary components and strong PMS dissociation generate abundant electron/hole (e^-/h⁺) pairs and SO₄^*-,*OH,O₂^*-reactive species, inducing remarkable degeneration capacity. Optimized doping of Bi₂MoO₆ on doped gCN (upto 10 wt%) generates excellent heterojunction interface with facile charge delocalization and e^-/h⁺ separation, as a combined effect of induced polarization, layered hierarchical structure oriented visible light harvesting and formation of S-scheme configuration. The synergistic action of 0.25 g/L BMO(10)@CN and 1.75 g/L PMS dosage can degrade 99.9% of AMOX in less than 30 min of Vis irradiation, with a rate constant (k_obs) of 0.176 min^-1. The mechanism of charge transfer, heterojunction formation and the AMOX degradation pathway was thoroughly demonstrated. The catalyst/PMS pair showed a remarkable capacity to remediate AMOX-contaminated real-water matrix. The catalyst removed 90.1% of AMOX after five regeneration cycles. Overall, the focus of this study is on the synthesis, illustration and applicability of n-n type S-scheme heterojunction photocatalyst to the photodegradation and mineralization of typical emerging pollutants in the water matrix.

Visible Light-Mediated Inactivation of H1N1 Virus UsingPolymer-Based Heterojunction Photocatalyst

It is well known that viruses cannot replicate on their own but only inside the cells of target tissues in the organism, resulting in the destruction of the cells or, in some cases, their transformation into cancer cells. While viruses have relatively low resistance in the environment, their ability to survive longer is based on environmental conditions and the type of substrate on which they are deposited. Recently, the potential for safe and efficient viral inactivation by photocatalysis has garnered increasing attention. In this study, the Phenyl carbon nitride/TiO₂ heterojunction system, a hybrid organic-inorganic photocatalyst, was utilized to investigate its effectiveness in degrading the flu virus (H1N1). The system was activated by a white-LED lamp, and the process was tested on MDCK cells infected with the flu virus. The results of the study demonstrate the hybrid photocatalyst's ability to cause the virus to degrade, highlighting its effectiveness for safe and efficient viral inactivation in the visible light range. Additionally, the study underscores the advantages of using this hybrid photocatalyst over traditional inorganic photocatalysts, which typically only work in the ultraviolet range.

Boosting charge separation in graphdiyne quantum dots/hollow tubular carbon nitride heterojunction for water pollutant degradation

Non-desirable solar energy absorption and poor charge transfer efficiency are two problems that limit the peroxymonosulfate (PMS) photocatalytic techniques. Herein, a metal-free boron-doped graphdiyne quantum dot (BGDs) modified hollow tubular g-C₃N₄ photocatalyst (BGD/TCN) was synthesized to activate PMS and achieved effective space separation of carriers for degradation of bisphenol A. With 0.5 mM PMS, the degradation rate of bisphenol A (20 ppm) was 0.0634 min^-1, 3.7-fold higher than that of TCN itself. The roles of BGDs in the distribution of electrons and photocatalytic property were well identified by experiments and density functional theory (DFT) calculations. The possible degradation intermediate products of bisphenol A were monitored by mass spectrometer and demonstrated to be nontoxic using ecological structure activity relationship modeling (ECOSAR). Finally, this newly-designed material was successfully applied in actual water bodies, which further renders its promising prospect for actual water remediation.

Visible light-driven NH2Cl activation by g-C3N4 photocatalysis producing reactive nitrogen species to degrade bisphenol A

The photolysis of monochloramine (NH₂Cl), a widely used disinfectant, under UVC irradiation produces different radicals for the micropollutant degradation. For the first time, this study demonstrates the degradation of bisphenol A (BPA) via the NH₂Cl activation by graphitic carbon nitride (g-C₃N₄) photocatalysis using visible light-LEDs at 420 nm, termed as the Vis₄₂₀/g-C₃N₄/NH₂Cl process. The process produces •NH₂, •NH₂OO, •NO and •NO₂ via the e_CB^-- and O₂^•--induced activation pathways and •NHCl and NHClOO• via the h_VB⁺-induced activation pathway. The produced reactive nitrogen species (RNS) enhanced 100% of the BPA degradation compared with the Vis₄₂₀/g-C₃N₄. Density functional theory calculations confirmed the proposed NH₂Cl activation pathways and further demonstrated that e_CB^-/O₂^•- and h_VB⁺ induced the cleavage of N-Cl and N-H bonds in NH₂Cl, respectively. The process converted 73.5% of the decomposed NH₂Cl to nitrogen-containing gas, compared with that of approximately 20% in the UVC/NH₂Cl process, leaving much less ammonia, nitrite and nitrate in water. Among different operating conditions and water matrices tested, of particular significance is natural organic matter of 5 mgDOC/L only reduced 13.1% of the BPA degradation compared against that of at least 46% reduction in the UVC/NH₂Cl process. Only 0.017-0.161 µg/L of disinfection byproducts were produced, two orders of magnitudes lower than that in the UVC/chlorine and UVC/NH₂Cl processes. The combined use of visible light-LEDs, g-C₃N₄ and NH₂Cl significantly improves the micropollutant degradation and reduces the energy consumption and byproduct formation of the NH₂Cl-based AOP.

Synergetic Photocatalytic Peroxymonosulfate Oxidation of Benzotriazole by Copper Ferrite Spinel: Factors and Mechanism Analysis

The development of oxidation processes with the efficient generation of powerful radicals is the most interesting and thought-provoking dimension of peroxymonosulfate (PMS) activation. This study reports the successful preparation of a magnetic spinel of CuFe₂O₄ using a facile, non-toxic, and cost-efficient co-precipitation method. The prepared material exhibited a synergetic effect with photocatalytic PMS oxidation, which was effective in degrading the recalcitrant benzotriazole (BTA). Moreover, central composite design (CCD) analysis confirmed that the highest BTA degradation rate reached 81.4% after 70 min of irradiation time under the optimum operating conditions of CuFe₂O₄ = 0.4 g L^-1, PMS = 2 mM, and BTA = 20 mg L^-1. Furthermore, the active species capture experiments conducted in this study revealed the influence of various species, including ^•OH, SO₄^•-, O₂^•-, and h⁺ in the CuFe₂O₄/UV/PMS system. The results showed that SO₄^•- played a predominant role in BTA photodegradation. The combination of photocatalysis and PMS activation enhanced the consumption of metal ions in the redox cycle reactions, thus minimizing metal ion leaching. Additionally, this maintained the reusability of the catalyst with reasonable mineralization efficiency, which reached more than 40% total organic carbon removal after four batch experiments. The presence of common inorganic anions was found to have a retardant effect on BTA oxidation, with the order of retardation following: HCO₃^- > Cl^- > NO₃^- > SO₄^2-. Overall, this work demonstrated a simple and environmentally benign strategy to exploit the synergy between the photocatalytic activity of CuFe₂O₄ and PMS activation for the treatment of wastewater contaminated with widely used industrial chemicals such as BTA.

Carbon quantum dots (CQDs) mediated Z-scheme g-C3N4-CQDs/BiVO4 heterojunction with enhanced visible light photocatalytic degradation of Paraben

The construction of a novel Z-scheme system which possesses superior charge separation and high redox ability is highly desirable for efficient photocatalytic degradation of organic pollutants. Herein, a carbon quantum dots (CQDs) modified g-C₃N₄ (GCN) and BiVO₄ (BVO) composite (GCN-CQDs/BVO) was fabricated via an initial loading of CQDs on GCN, and a subsequent combination with BVO during its hydrothermal synthesis. Physical characterization (e.g. TEM, XRD, XPS) verified the intimate heterojunction structure of the composite, while CQDs improved its light absorption. The band structures of GCN and BVO were evaluated, displaying the feasibility for Z-scheme formation. In comparison with GCN, BVO, and GCN/BVO, GCN-CQDs/BVO generated the highest photocurrent and lowest charge transfer resistance, inferring the prominently improved charge separation. Under visible light irradiation, GCN-CQDs/BVO exhibited the significantly enhanced activity in degrading the typical Paraben pollutant--benzyl paraben (BzP), achieving the removal of 85.7% in 150 min. The effects of various parameters were explored, demonstrating that neutral pH was optimal, while coexisting ions (CO₃^2-, SO₄^2-, NO₃^-, K⁺, Ca²⁺, Mg²⁺) and humic acid impacted the degradation negatively. Meanwhile, trapping experiments and electron paramagnetic resonance (EPR) technique revealed that superoxide radicals (•O₂^-) and hydroxyl radical (•OH) were primarily responsible for BzP degradation by GCN-CQDs/BVO. In particular, with the assistance of CQDs, the generation of •O₂^- and •OH was notably augmented. Based on these results, a Z-scheme photocatalytic mechanism was proposed for GCN-CQDs/BVO, where CQDs acted as electron mediators to combine the holes from GCN and electrons from BVO, resulting in significantly improved charge separation and maximized redox ability. Moreover, the toxicity of BzP was remarkably reduced during the photocatalytic process, emphasizing its great potential in abating the risk of Paraben pollutants.

A superior ternary Z-scheme photocatalyst of Bi/Black Phosphorus nanosheets/P-doped BiOCl containing interfacial P-P bond and metallic mediator for H2O2 production and RhB degradation

Photocatalytic performance is significantly influenced by the efficiency of photogenerated electron-hole pairs separation and transfer. In this paper, rational designed Z-scheme Bi/Black Phosphorus Nanosheets/P-doped BiOCl (Bi/BPNs/P-BiOCl) nanoflower photocatalyst was synthesized by a facile in-situ reduction process. The interfacial P-P bond between Black phosphorus nanosheets (BPNs) and P-doped BiOCl (P-BiOCl) was investigated by the XPS spectrum. The Bi/BPNs/P-BiOCl photocatalysts exhibited enhanced photocatalytic performance for H₂O₂ production and RhB degradation. The optimally modified photocatalyst (Bi/BPNs/P-BiOCl-20) showed an excellent photocatalytic H₂O₂ generation rate of 4.92 mM/h and RhB degradation rate of 0.1169 min^-1 under simulated sunlight irradiation, which was 1.79 times and 1.25 times greater than the P-P bond free Bi/BPNs/BiOCl-20. The mechanism was investigated through charge transfer route, radical capture experiments, and band gap structure analysis, indicating that the formation of Z-scheme heterojunctions and interfacial P-P bond not only enhances the redox potential of the photocatalyst but also facilitates the separation and migration of photogenerated electrons-holes. This work might provide a promising strategy for constructing Z-scheme 2D composite photocatalysts combining interfacial heterojunction and elemental doping engineering for efficient photocatalytic H₂O₂ production and organic dye pollutant degradation.

O and S co-doping induced N-vacancy in graphitic carbon nitride towards photocatalytic peroxymonosulfate activation for sulfamethoxazole degradation

Doping-induced vacancy engineering of graphitic carbon nitride (GCN) is beneficial for bandgap modulation, efficient electronic excitation, and facilitated charge carrier migration. In this study, synthesis of oxygen and sulphur co-doped induced N vacancies (OSGCN) by the hydrothermal method was performed to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) antibiotic degradation and H₂ production. The results from experimental and DFT simulation studies validate the synergistic effects of co-dopants and N-vacancies, i.e., bandgap lowering, electron-hole pairs separation, and high solar energy utilization. The substitution of sp² N atom by O and S co-dopants causes strong delocalization of HOMO-LUMO distribution, enhancing carrier mobility, increasing reactive sites, and facilitating charge-carrier separation. Remarkably, OSGCN/PMS photocatalytic system achieved 99.4% SMX degradation efficiency and a high H₂ generation rate of 548.23 μ mol g^-1 h^-1 within 60 min and 36 h, respectively under visible light irradiations. The SMX degradation kinetics was pseudo-first-order with retained recycling efficiency up to 4 catalytic cycles. The results of EPR and chemical scavenging experiments revealed the redox action of reactive oxidative species, wherein ¹O₂ was the dominant reactive species in SMX degradation. The identification of formed intermediates and the SMX stepwise degradation pathway was investigated via LC-MS analysis and DFT studies, respectively. The results from this work anticipated deepening the understanding of PMS activation by substitutional co-doping favoring N-vacancy formation in GCN lattice for improved photocatalytic activity.

Pt modified NiMoO4-GO/NF nanorods withstrong metal-support interaction as efficient bifunctional catalysts for overall water splitting

Catalysts for the electrolysis of water are critical in the production of hydrogen for the energy industry. The use of strong metal-support interactions (SMSI) to modulate the dispersion, electron distribution, and geometry of active metals is an effective strategy for improving catalytic performance. However, in currently used catalysts, the supporting effect does not significantly contribute directly to catalytic activity. Consequently, the continued investigation of SMSI, using active metals to stimulate the supporting effect for catalytic activity, remains very challenging. Herein, the atomic layer deposition technique was employed to prepare an efficient catalyst composed of platinum nanoparticles (Pt NPs) deposited on nickel-molybdate (NiMoO₄) nanorods. Nickel-molybdate's oxygen vacancies (V_o) not only help anchor highly-dispersed Pt NPs with low loading but also strengthen the SMSI. The valuable electronic structure modulation between Pt NPs and V_o resulted in a low overpotential of the hydrogen and oxygen evolution reactions, returning results of 190 mV and 296 mV, respectively, at a current density of 100 mA cm^-2 in 1 M KOH. Ultimately, an ultralow potential (1.515 V) for the overall decomposition of water was achieved at 10 mA cm^-2, outperforming state-of-art catalysts based on the Pt/C || IrO₂ couple (1.668 V). This work aims to provide reference and a concept for the design of bifunctional catalysts that apply the SMSI effect to achieve a simultaneous catalytic effect from the metal and its support.

Application of BiOX Photocatalyst to Activate Peroxydisulfate Ion-Investigation of a Combined Process for the Removal of Organic Pollutants from Water

The persulfate-based advanced oxidation processes employing heterogeneous photocatalysts to generate sulfate radicals (SO4•−) from peroxydisulfate ion (PDS, S2O82−) have been extensively investigated to remove organic pollutants. In this work, BiOX (X = Cl, Br, and I) photocatalysts were investigated to activate PDS and enhance the transformation rate of various organic substances under UV (398 nm) and Vis (400–700 nm) radiation. For BiOCl and BiOBr, in addition to excitability, the light-induced oxygen vacancies are decisive in the activity. Although without organic substances, the BiOI efficiency highly exceeds that of BiOBr and BiOCl for PDS activation (for BiOI, 15–20%, while for BiOBr and BiOCl, only 3–4% of the PDS transformed); each BiOX catalyst showed enhanced activity for 1,4-hydroquinone (HQ) transformation due to the semiquinone radical-initiated PDS activation. For sulfamethoxypyridazine (SMP), the transformation is driven by direct charge transfer, and the effect of PDS was less manifested. BiOI proved efficient for transforming various organic substances even under Vis radiation. The efficiency was enhanced by PDS addition (HQ is wholly transformed within 20 min, and SMP conversion increased from 40% to 90%) without damaging the catalyst; its activity did change over three consecutive cycles. Results related to the well-adsorbed trimethoprim (TRIM) and application of biologically treated domestic wastewater as a matrix highlighted the limiting factors of the method and visible light active photocatalyst, BiOI.

Photocatalytic degradation of Reactive Black dye using ZnO-CeO2 nanocomposites

This study presents the photocatalytic efficiency of ZnO-CeO₂ nanocomposites for the degradation of a model Reactive Black (RB) dye. Nano-CeO₂ was synthesized using cerium nitrate precursor solution via chemical precipitation. Synthesized nano-CeO₂ was mixed with ZnO nanoparticles in different mass ratios to obtain ZnO-CeO₂ heterojunction photocatalyst. The morphology of the nanocomposites was examined using transmission electron microscope (TEM). X-ray diffraction patterns of the CeO₂ corresponded well with (1 1 1) plane of cubic-phase CeO₂. The band gap of the ZnO-CeO₂ nanocatalyst synthesized was determined to be 3.08 eV, which was lower than that of the pristine CeO₂ and ZnO powders, respectively. The results indicate that 1:1 wt. ratio ZnO-CeO₂ nanocomposite provides about 85% RB degradation within 90 min under UV light under alkaline pH conditions. Degradation rate of RB dye achieved with ZnO-CeO₂ nanocomposite was almost 1.5 times greater than that obtained with pristine ZnO. Increasing CeO₂ ratio beyond 1:1 wt. ratio did not significantly increase RB degradation. The results demonstrate that addition of CeO₂ to ZnO results in lowering its band gap energy and aids charge carrier separation resulting in enhanced oxidation of RB dye under UV light.

In-situ synthesis of novel dual S-scheme AgI/Ag6Mo7O24/g-C3N4 heterojunctions with tandem structure for photocatalytic degradation of organic pollutants

The controllable design of multivariate heterojunction with sequential structures is of significant relevance for breaking the performance limit of binary composite photocatalysts. In this work, the novel dual S-scheme ternary-component AgI/Ag₆Mo₇O₂₄/exfoliated g-C₃N₄ (ECN) composite was prepared by a two-step in-situ synthetic strategy. The energy band bending at the heterointerface and the formation of dual built-in electric field could be observed due to distinct work functions of different components in the ternary composite. Benefiting from the sequential heterojunction structure, the AgI/Ag₆Mo₇O₂₄/ECN composite achieved 98.7% removal efficiency of 2-nitrophenol (2-NP) within 70 min under visible light irradiation, and AgI/Ag₆Mo₇O₂₄/ECN also showed higher degradation efficiency for a variety of organic pollutants such as methylene blue (MB), rhodamine B (RhB), methyl orange (MO), 4-nitrophenol (4-NP), 2-sec-butyl-4,6-dinitrophenol (DNBP) and tetracycline (TC). Notably, •OH and •O₂^- played dominant roles in the AgI/Ag₆Mo₇O₂₄/ECN set up, which was consistent with the dual S-scheme charge transfer mechanism. In-depth insights for the photodegradation of 2-NP were presented based on a combined DFT study and GC-MS analysis. Additionally, the photoreduction of Ag⁺ in AgI/Ag₆Mo₇O₂₄/ECN was also evaded by the fast transfer of photogenerated electrons through the dual S-scheme pathway, achieving the effect of killing two birds with one stone.

Simultaneous precipitation and discharge plasma processing for one-step synthesis of α-Fe2O3-Fe3O4/graphene visible light magnetically separable photocatalysts

A novel facile combination of precipitation and plasma discharge reaction is successfully employed for one-step synthesis of an α-Fe₂O₃-Fe₃O₄ graphene nanocomposite (GFs). The co-existence and anchoring of hematite (α-Fe₂O₃) and magnetite (Fe₃O₄) nanoparticles onto a graphene sheet in the as synthesized GFs were verified by results of XRD, Raman, SEM, TEM, and XPS. HRTEM characterization was used for confirming the bonding between α-Fe₂O₃/Fe₃O₄ nanoparticles and the graphene sheet. Consequently, GFs shows superior photodegrading performance towards methylene blue (MB), compared to individual α-Fe₂O₃/Fe₃O₄ nanoparticles, as a result of band gap narrowing and the electron-hole pair recombination rate reducing. Moreover, GFs allows a good possibility of separating and recycling under an external-magnetic field, suggesting potential in visible-light-promoted photocatalytic applications.

Carbonyl heterocycle modified mesoporous carbon nitride in photocatalytic peroxydisulfate activation for enhanced ciprofloxacin removal: Performance and mechanism

Polymer carbon nitride is considered to be a promising photocatalyst with broad application prospects in water treatment. However, the defects of pristine polymer carbon nitride (PCN), such as small specific surface area, fast photogenerated electron-hole recombination, and low mass transfer efficiency, limit its photocatalytic activity. In this work, by introducing 2-thiouracil into the precursor, a carbonyl heterocycle-containing mesoporous carbon nitride photocatalyst (TCN) was successfully obtained with significantly enhanced peroxydisulfate (PDS) photocatalytic activity. In this study, the modulation mechanism of carbonyl heterocycle introduction on surface electronic structure and the band structure were fully discussed by means of a combination of experiments and theoretical calculations. The carbonyl and vicinal carbon-modified heterocycles dominated the electrons, while the adjacent heptazine ring dominated the holes. The photogenerated electron-hole pair recombination efficiency and the electron transition energy barrier were greatly reduced. According to the findings of density functional theory (DFT) calculations, the introduction of carbonyl and vicinal C modulated the electronic structure of catalyst, enhanced the adsorption of PDS at the carbonyl ortho N site, which promoted the electronic interaction between TCN and PDS molecules. Experiments showed that the free radical pathway and non-radical pathway coexisted in TCN/PDS/Vis system. The reactive oxygen species were mainly derived from PDS molecules. DFT calculations provided a more comprehensive theoretical basis for the experimental results. This study provided a fresh perspective on the rational design of carbon nitride-based catalysts and the reaction mechanism of persulfate advanced oxidation systems.

Recent advances in structural engineering of photocatalysts for environmental remediation

Photocatalysis appears to be an appealing approach for environmental remediation including pollutants degradation in water, air, and/or soil, due to the utilization of renewable and sustainable source of energy, i.e., solar energy. However, their broad applications remain lagging due to the challenges in pollutant degradation efficiency, large-scale catalyst production, and stability. In recent decades, massive efforts have been devoted to advance the photocatalysis technology for improved environmental remediation. In this review, the latest progress in this aspect is overviewed, particularly, the strategies for improved light sensitivity, charge separation, and hybrid approaches. We also emphasize the low efficiency and poor stability issues with the current photocatalytic systems. Finally, we provide future suggestions to further enhance the photocatalyst performance and lower its large-scale production cost. This review aims to provide valuable insights into the fundamental science and technical engineering of photocatalysis in environmental remediation.

A novel photocatalytic system coupling metal-free Carbon/g-C3N4 catalyst with persulfate for highly efficient degradation of organic pollutants

A variety of photocatalytic systems have emerged as the effective methods for the degradation of organic pollutants. In this research, a novel photocatalytic system, named CNC-PDS has been proposed, which couples a metal-free carbon/g-C₃N₄ (CNC) photocatalyst with persulfate (PDS), and applied for efficient degradation of paracetamol (PCM) under simulated sunlight. The CNC-PDS system exhibited excellent photocatalytic capability, where the PCM was completely degraded in 40 min under simulated sunlight. The degradation rate of CNC-PDS system was 9.5 times compared with the g-C₃N₄ and PDS coupled systems. The CNC-PDS system can efficiently degrade other representative pollutants in neutral solutions, such as pharmaceuticals, endocrine disrupting compounds (EDCs), azo dyes. The excellent catalytic activity of CNC-PDS system should be ascribed to the two aspects: a) the increased light absorption range led to more photo-induced electron-hole pairs generation compared with the original g-C₃N₄. Meanwhile, the charge separation efficiency of the CNC photocatalyst was drastically enhanced which was proved by the results of PL and EIS analysis. These results represented the carbon/g-C₃N₄ might offer more e^- to promote PDS activation. b) The introduction of CO and the improved specific surface area provided more active sites for PDS activation. In addition, the EPR analysis and quenching experiments indicated that O₂^.-, h⁺ and ¹O₂ were the main active species for PCM in the CNC-PDS system under simulated sunlight, and the contribution order was O₂^.->¹O₂>h⁺. The degradation pathways of PCM in the CNC-PDS system are proposed based on the results of HPLC-MS. The novel CNC-PDS photocatalytic system has provided a viable option for treatment of contaminated water by organic pollutants.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Realizing pure spin current by the photogalvanic effect in armchair graphene nanoribbons with nano-constriction engineering

We propose nano-constriction engineering of armchair graphene nanoribbons (AGNRs) to construct photoelectric nanodevices aiming to generate pure spin currents through the photogalvanic effect (PGE) using first-principles calculations. Two devices with different symmetries were designed, one by introducing only one isosceles zigzag triangle defect on the lower edge of the central region ('D1') and the other by two symmetrically distributed isosceles zigzag triangle defects on the two edges ('D2'). The results show that pure spin current without accompanying charge current can be generated in both junctions, but with a big difference that pure spin current can be generated only at special polarization angles θ = 0°, 90° and 180° in device D1, while it can be generated at any polarization angle in D2. The robustness in D2 is attributed to the spatial inversion symmetry in geometry and the inversion antisymmetry of spin density. These findings suggest that local magnetism engineering provides a reliable method for generating robust pure spin currents with the PGE in nonmagnetic systems, especially opening up new possibilities for the application of AGNRs in spintronics.

Engineered g-C3N5-Based Nanomaterials for Photocatalytic Energy Conversion and Environmental Remediation

Photocatalysis plays a vital role in sustainable energy conversion and environmental remediation because of its economic, eco-friendly, and effective characteristics. Nitrogen-rich graphitic carbon nitride (g-C₃N₅) has received worldwide interest owing to its facile accessibility, metal-free nature, and appealing electronic band structure. This review summarizes the latest progress for g-C₃N₅-based photocatalysts in energy and environmental applications. It begins with the synthesis of pristine g-C₃N₅ materials with various topologies, followed by several engineering strategies for g-C₃N₅, such as elemental doping, defect engineering, and heterojunction creation. In addition, the applications in energy conversion (H₂ evolution, CO₂ reduction, and N₂ fixation) and environmental remediation (NO purification and aqueous pollutant degradation) are discussed. Finally, a summary and some inspiring perspectives on the challenges and possibilities of g-C₃N₅-based materials are presented. It is believed that this review will promote the development of emerging g-C₃N₅-based photocatalysts for more efficiency in energy conversion and environmental remediation.

Modulation of Z-scheme photocatalysts for pharmaceuticals remediation and pathogen inactivation: Design devotion, concept examination, and developments

The recent outbreak of Covid-19 guarantees overconsumption of different drugs as a necessity to reduce the symptoms caused by this pandemic. This triggers the proliferation of pharmaceuticals into drinking water systems. Is there any hope for access to safe drinking water? Photocatalytic degradation using artificial Z-scheme photocatalysts that has been employed for over a decade conveys a prospect for sustainable clean water supply. It is compelling to comprehensively summarise the state-of-the-art effects of Z-scheme photocatalytic systems towards the removal of pharmaceuticals in water. The principle of Z-scheme and the techniques used to validate the Z-scheme interfacial charge transfer are explored in detail. The application of the Z-scheme photocatalysts towards the degradation of antibiotics, NSAIDs, and bacterial/viral inactivation is deliberated. Conclusions and stimulating standpoints on the challenges of this emergent research direction are presented. The insights and up-to-date information will prompt the up-scaling of Z- scheme photocatalytic systems for commercialization.

Fe-g-C3N4/reduced graphene oxide lightless application for efficient peroxymonosulfate activation and pollutant mineralization: Comprehensive exploration of reactive sites

To overcome the shortcomings of homogeneous Fe ion activating peroxymonosulfate (PMS), such as high pH-dependence, limited cycling of Fe(III)/Fe(II) and sludge production, graphite carbon nitride (g-C₃N₄) is chosen as a support for Fe ions, and reduced graphene oxide (rGO) is employed to facilitate the electron transfer process, thereby enhancing catalysis. Herein, a ternary catalyst, Fe-g-C₃N₄/rGO, is first applied under lightless condition for PMS activation, which exhibits ideal performance for contaminant mineralization. 82.5 % of the total organic carbon (TOC) in 100 mL of 5 mg/L bis-phenol A (BPA) was removed within 20 min by the optimal catalyst named 30%rFe_0.2CN, which shows a strong pH adaptability over the range of 3-11 compared with a common Fenton-like system. Moreover, the highly stable Fe-g-C₃N₄/rGO/PMS catalytic system resists complex water matrices, especially those with high turbidity. To unveil the mechanism of PMS activation and pollutant degradation, the physicochemical properties of the as-prepared catalysts are comprehensively characterized by multiple techniques. The Fe(III) contained in both the Fe-N group and α-Fe₂O₃ component of 30%rFe_0.2CN not only directly reacts with PMS to produce sulfate radicals (SO₄^-) and hydroxyl radicals (OH), but also combines with PMS to form the essential [Fe(III)OOSO₃]⁺ active complex, thereby generating superoxide radicals (O₂^-) and singlet oxygen (¹O₂). Among the various reactive oxidizing species, ¹O₂ plays an important role in pollutant removal, which is additionally generated by the CO moiety of the catalyst activating PMS as well as PMS self-oxidation, indicating the dominance of the non-radical pathway in the pollutant degradation process. Due to the advantages of high efficiency, wide pH adaptability and stability, the proposed lightless Fe-g-C₃N₄/rGO/PMS catalytic system represents a promising avenue for practical wastewater purification.

Synergistic effect of exfoliation and substitutional doping in graphitic carbon nitride for photocatalytic H2O2 production and H2 generation: a comparison and kinetic study

The fabricated exfoliated e-BCN demonstrated stupendous H2O2 production and H2 generation owing to sufficient active surface area and enhanced aromatic π-conjugation, faster charge migration/separation efficiency.

CoP decorated 2D/2D red phosphorus/B doped g-C3N4 type II heterojunction for boosted pure water splitting activity via the two-electron pathway

CoP decorated 2D/2D red phosphorus/B doped g-C3N4 heterojunction enabled photocatalytic pure water splitting to produce H2 with a two-electron process.

Enhanced activation of peroxymonosulfate by a floating FeMo3Ox/C3N4 photocatalyst under visible-light assistance for oxytetracycline degradation: Performance, mechanisms and comparison with H2O2 activation

In this study, a floating FeMo₃O_x/C₃N₄-EP (FM-C-P) composite with highly stability and reusability was synthesized by an impregnation/calcination process and used to activate peroxymonosulfate (PMS) for oxytetracycline (OTC) degradation under visible light irradiation. The results demonstrated that 98.1% of OTC (50 mg/L) removal can be achieved by the activation of PMS (5 mM) using FM-C-P (1 g/L) in 30 min under visible light irradiation. The pseudo-first-order rate constant was calculated to be 0.181 min^-1. The degradation process with PMS was hardly affected by pH (3-11) and co-existing substance. ·SO₄^-, ·OH, ·O₂^- and ¹O₂ were produced in the Vis/PMS/FM-C-P system and ¹O₂ was determined to be the main reactive oxygen species (ROSs). The high efficiency of ROSs production mainly contributed to two mechanisms. Firstly, via the combination of ≡Fe (II)-·SO₅^- and free state ·SO₅^-, ¹O₂ could be generated on the Fe-N_x site. Secondly, photo-induced electrons in the FeMo₃O_x/g-C₃N₄ heterojunction could react with Fe (III) and Mo (VI) to form catalytically active species Fe (II) and Mo (IV). Moreover, the proposed degradation pathway and the toxicity of intermediated products was analyzed. Overall, this study was expected to deepen the understanding of the photo-assisted PMS activation and the generation of ¹O₂ with the presence of metal-oxide/C₃N₄ heterojunction.

Light-Fueled Hydrogel Actuators with Controlled Deformation and Photocatalytic Activity

Hydrogel actuators have shown great promise in underwater robotic applications as they can generate controllable shape transformations upon stimulation due to their ability to absorb and release water reversibly. Herein, a photoresponsive anisotropic hydrogel actuator is developed from poly(N-isopropylacrylamide) (PNIPAM) and gold-decorated carbon nitride (Au/g-C3 N4 ) nanoparticles. Carbon nitride nanoparticles endow hydrogel actuators with photocatalytic properties, while their reorientation and mobility driven by the electrical field provide anisotropic properties to the surrounding network. A variety of light-fueled soft robotic functionalities including controllable and programmable shape-change, gripping, and locomotion is elicited. A responsive flower-like photocatalytic reactor is also fabricated, for water splitting, which maximizes its energy-harvesting efficiency, that is, hydrogen generation rate of 1061.82 µmol g-1 h-1 , and the apparent quantum yield of 8.55% at 400 nm, by facing its light-receiving area adaptively towards the light. The synergy between photoactive and photocatalytic properties of this hydrogel portrays a new perspective for the design of underwater robotic and photocatalytic devices.