Recyclable polyurethane foam loaded with carboxymethyl chitosan for adsorption of methylene blue

Exploring the cationic surfactant adsorption efficiency at concentrations relative to the critical micelle concentration by SA/SiO2 microspheres

Studying the adsorption behavior of cationic surfactants can help to develop more effective strategies to limit their dispersion in the environment. However, there have few studies on the adsorption of cationic surfactants from the perspective of critical micelle concentration (CMC). In this study, with cetyltrimethylammonium bromide (CTAB) and octadecyl trimethylammonium bromide (OTAB) serving as the model cationic surfactants, the effect of CMC on the adsorption behavior of cationic surfactant onto the surface of sodium alginate/silica (SA/SiO2) microspheres was systematically revealed. The adsorption mechanism relative to CMC was investigated under different conditions, including surfactant concentration, pH, temperature, and adsorption time. The results suggest that at identical concentrations, the smaller the CMC value of the cationic surfactants, the greater the adsorption amount (qt). qt for CTAB and OTAB were 583.2 and 678.0 mg/g respectively, with the concentration higher than their CMC value. When the concentration was lower than the CMC value of the cationic surfactants, qt for CTAB and OTAB were 123.2 and 138.7 mg/g, respectively. The CMC value of CTAB was lower than that of OTAB under identical conditions, suggesting that the adsorption of cationic surfactants is related to their CMC. These results are beneficial for the removal of cationic surfactants by adsorption methods.

Enhanced methylene blue adsorption using single-walled carbon nanotubes/chitosan-graft-gelatin nanocomposite hydrogels

In the present study, single-walled carbon nanotubes (SWCNTs) incorporating chitosan-graft-gelatin (CS-g-GEL/SWCNTs) hydrogels were fabricated with multiple advantages, including cost-effectiveness, high efficiency, biodegradability, and ease of separation for methylene blue (MB) dye from aqueous solution. To verify the successful formulation of the prepared hydrogels, various characterization methods such as NMR, FTIR, XRD, FE-SEM, TGA, BET, and EDX were employed. The removal efficiency of CS-g-GEL/SWCNTs nanocomposite hydrogel increased significantly to 98.87% when the SWCNTs percentage was increased to 20%. The highest adsorption was observed for pH = 9, an adsorbent dose = 1.5 g L-1, a temperature = 25 °C, a contact time = 60 min, and a contaminant concentration = 20 mg L-1. Based on the thermodynamic results, spontaneous adsorption occurred from a negative Gibbs free energy (ΔG°). In addition, the thermodynamic analysis of the adsorption process revealed an average enthalpy of - 21.869 kJ mol-1 for the adsorption process at a temperature range of 25-45 °C, which indicates its spontaneous and exothermic behavior. The Langmuir isotherm model was successfully used to describe the equilibrium behavior of adsorption. The pseudo-first-order model better described adsorption kinetics compared to the pseudo-second-order, intra-particle, and Elovich models. CS-g-GEL/SWCNTs hydrogels have improved reusability for five consecutive cycles, suggesting that they may be effective for removing anionic dyes from aquatic environments.

Neem biomass derived carbon quantum dots synthesized via one step ultrasonification method for ecofriendly methylene blue dye removal

This article presents a one-step ultrasonication technique for generating biomass carbon dots (BCDs) from neem bark (Azadirachta indica) powder. The BCDs were characterized using modern techniques such as UV-Vis, FTIR, Raman, XRD, HRTEM, FESEM, EDAX, and Zeta potential analyses. Unlike traditional nanocomposite bed systems, this study utilized BCDs as a liquid-phase adsorbent for the regenerative adsorption of the environmentally harmful dye, methylene blue (MB), through an in-situ precipitation reaction. This involved the formation of BCDs-MB adduct via an electrostatic mechanism. The adsorption capacity and percentage of removal were remarkable at 605 mg g-1 and 64.7% respectively, exceeding various solid-based adsorption methods in the literature. The Langmuir isotherm and pseudo-second-order kinetics model provided an excellent fit for this system. The calculated thermodynamic parameter, Gibbs free energy change (ΔG) was negative, indicating a spontaneous, exothermic, and physisorption-based mechanism. The regenerative capacity of our system was further demonstrated by successfully extracting and recovering the MB dye (64%) using ethyl alcohol as the solvent. This method provides an efficient means of recovering valuable cationic organic dye compounds from contaminated environments.

Preparation of reusable hydrogel spheres based on sodium alginate/Fe3O4 modified with carboxymethyl Huangshui polysaccharide and the efficient adsorption performance for methylene blue

This study successfully constructed a novel multifunctional bio-adsorbent using sodium alginate (SA), ferroferric oxide (FFO), and carboxymethyl Huangshui polysaccharide (CMHSP) with rapid separation, pH sensitivity, efficient adsorption, and reusability for enhancing the removal of methylene blue (MB) in wastewater. FTIR, XRD, SEM, and VSM results indicated CMHSP improved the porosity of the hydrogel spheres, thus significantly enhancing the MB adsorption capacity with the rate-limiting controlled by chemical adsorption, intraparticle diffusion, and film diffusion. The maximum adsorption capacity obtained from Langmuir model of SA-FFO-CMHSP (186.57 mg/g) was obviously higher than that of SA-FFO (178.82 mg/g). Thermodynamic results showed that the MB adsorption process was endothermic, spontaneous, and favorable, and physical adsorption was dominant. Remarkably, MB adsorption maintained 87% ∼ 95% of the initial after four adsorption-desorption cycles, and proper carboxymethylation was conducive to MB adsorption over a broader range pH. These findings provided reference for designing new efficient bio-adsorbents and the recyclable utilization of Huangshui by-products, which was of great value.

Green synthesis of carbon quantum dots from teak leaves biomass for in situ precipitation and regenerative-removal of methylene blue-dye

The objective of this study was to completely eliminate environmentally harmful cationic organic dye from aqueous solutions using the one-step ultrasonication method, renowned for its energy efficiency, user-friendliness, and minimal requirement for chemical resources, making it particularly suitable for large-scale applications. To achieve effective environmental remediation, we employed carbon dots derived from teak leaf biomass (TBCDs) layered with graphene oxide. We conducted a thorough characterization of the TBCDs using UV-vis spectroscopy (with absorption peaks at λmax = 208 and 276 nm), FTIR spectroscopy (confirming the presence of various functional groups including -OH, -CH, C = O, COO-, C-O-C, and = C-H), Raman spectroscopy (with bands at 1369 cm-1 (D-Band) and 1550 cm-1 (G-Band), and an intensity ratio (ID/IG) = 0.88, indicating structural defects correlated with the sp3 hybridization sites on the TBCDs), XRD analysis (indicating an amorphous nature of particles), HRTEM imaging (showing homogeneous dispersal of TBCDs with typical sizes ranging from 2 to 10 nm), FESEM analysis (showing a flat surface and minuscule particles), and Zeta potential analysis (revealing a surface charge peak at -51.0 mV). Our adsorption experiments yielded significant results, with a substantial 50.1 % removal rate and an impressive adsorption capacity of 735.2 mg g-1. Theoretical adsorption parameters were rigorously analyzed to understand the adsorption behavior, surface interactions, and mechanisms. Among these models, the Langmuir isotherm in conjunction with pseudo-second-order kinetics provided an exceptional fit (with R2 values closer to 1) for our system. The Gibbs free energy (ΔG) was found to be negative at all temperatures, indicating the spontaneity of the reaction. Regarding mechanism, electrostatic attraction ((+ve) MB dye + (- ve) TBCDs), π-π stacking adsorption facilitated by the graphitic structure, formation of multiple hydrogen bonds due to polar functional groups, and a pore-filling mechanism wherein the cationic MB dye fills the pores of TBCDs with graphene oxide layers, forming an adduct were identified. Furthermore, we demonstrated the regenerative capacity of our system by effectively extracting and recovering the MB dye (with a regeneration rate of 77.1%), utilizing ethyl alcohol as the solvent. These findings not only provide valuable insights into the adsorption capabilities of TBCDs but also highlight the potential of our approach in the recovery of expensive cationic organic dye compounds from polluted environments.

"Floating Catalytic Foam" with prominent heat-induced convection for the effective photocatalytic removal of antibiotics

Immobilized photocatalysts represent a promising candidate for the wastewater treatments due to their good reusability, high stability and low eco-risk. Mass transfer within the immobilized catalytic bed is a crucial process that determines the contacting, adsorption, and degradation kinetics in the photodegradation. In this study, a floating catalytic foam (FCF) with a prominent pumping effect was designed to promote mass transfer. The polyurethane foam immobilized with rGO/TiO2/ultrathin-g-C3N4 photocatalyst (PRTCN) was prepared by a simple dip-coating and Uv-light aging process. It was found that the hydrophilic-hydrophobic interfaces could not only contribute to the floating of the catalyst but also establish a temperature gradient across the floating immobilized catalyst. In addition, the temperature gradient induced convection could serve as a built-in pump to effectively promote the diffusion and adsorption of target antibiotic molecules during the photocatalytic process. Therefore, the PRTCN demonstrated a high photodegradation and mineralization efficiency with excellent reusability and anti-interference capability. Moreover, the photodegradation mechanism and the intermediates' toxicity of norfloxacin were detailly investigated by ultra-high resolution electrospray time-of-flight mass spectrometry, density functional theory simulation and ECOSAR estimation. This work proposed a facile and sustainable strategy to enhance the mass transfer problem on immobilized photocatalysts, which could promote the application of the immobilized photocatalysts in the real water-treatment scenarios.

Removal of cationic dye pollutants from wastewater with HS loaded semi-IPN composites: kinetic and thermodynamic studies

In this study, methylene blue (MB) pollutant in water was removed using produced hazelnut shell loaded semi-interpenetrating polymer networks (HS loaded semi-IPN) adsorbent. The physical and chemical characterizations of the adsorbents were investigated using TGA, DSC, FT-IR, BET, FE-SEM, and EDX. Experimental parameters such as temperature, swelling, dye concentration, contact time, pH solution, and adsorbent dosage for MB adsorption were thoroughly investigated. It was determined that the HS loaded semi-IPN adsorbent removed 92.1% of MB dye. Subsequently, the adsorption properties between the adsorbent and dye were investigated in detail using several different kinetic, isotherm, and thermodynamic models. As a result of the obtained data, the interaction between adsorbent and dye molecules is discussed. Moreover, studies on the industrial usability of the adsorbent have been carried out, and it has been observed that the adsorbent can be employed even after four cycles.

Fe-pillared montmorillonite functionalized chitosan/gelatin foams for efficient removal of organic pollutants by integration of adsorption and Fenton degradation

A Fe-pillared montmorillonite (Fe-MMT) functionalized bio-based foam (Fe-MMT@CS/G) was developed by using chitosan (CS) and gelatin (G) as the matrix for high-efficiency elimination of organic pollutants through the integration of adsorption and Fenton degradation. The results showed that the mechanical properties of as-obtained foam were strengthened by the addition of certain amounts of Fe-MMT. Interestingly, Fe-MMT@CS/G displayed efficient adsorption ability for charged pollutants under a wide range of pH. The adsorption processes of methyl blue (MB), methylene blue (MEB) and tetracycline hydrochloride (TCH) on Fe-MMT@CS/G were well described by the Freundlich isotherm model and pseudo-second-order kinetic model. The maximum adsorption capacities were 2208.24 mg/g for MB, 1167.52 mg/g for MEB, and 806.31 mg/g for TCH. Electrostatic interactions, hydrogen bonding and van der Waals forces probably involved the adsorption process. As expected, this foam could exhibit better removal properties toward both charged and uncharged organic pollutants through the addition of H2O2 to trigger the Fenton degradation reaction. For non-adsorbable and uncharged bisphenol A (BPA), the removal efficiency was dramatically increased from 1.20 % to 92.77 % after Fenton degradation. Additionally, it presented outstanding recyclability. These results suggest that Fe-MMT@CS/G foam is a sustainable and efficient green material for the alleviation of water pollution.

Treating waste with waste: Adsorption of anionic dyes in wastewater with surfactant-modified phosphogypsum

Phosphogypsum (PG) is a solid waste generated during the wet process of phosphoric acid production. The environmental-friendly disposal and recycling of PG is vital in the field of environmental solid waste treatment. In this study, PG is used for adsorbent of dyes in wastewater to achieve the goal of recycling waste with waste. Surfactant-modified phosphogypsum (ODBAC@PG) was prepared using octadecyl dimethyl benzyl ammonium chloride (ODBAC) as modifier. ODBAC@PG exhibits high adsorption capability for anionic dyes (methyl blue (MeB) and indocyanine carmine (IC)). The pseudo-second-order kinetic model fits the kinetic experimental data for the adsorption of two organic anionic dyes. Langmuir adsorption isotherm fits the adsorption characteristics of MeB and IC on ODBAC@PG, exhibiting a monolayer adsorption pattern. Thermodynamic parameters indicate the spontaneous and exothermic properties of MeB and IC on ODBAC@PG. MeB and IC have antagonistic effects on each other in binary adsorption system. High adsorption capacity after six cycles of experiments demonstrates the high reusability of ODBAC@PG. The nature for the adsorption includes electrostatic interaction, hydrogen bond and hydrophobic interaction. Using ODBAC@PG for dyes wastewater treatment can accomplish the goal of treating waste with waste and turning waste into treasure.

Nanocellulose-based polyurethane foam adsorbent for pressure-driven dye-contaminated water purification

Dye-contaminated water has caused a worldwide pollution, which is threatening aquatic organisms and human health. In this work, a pressure-driven foam adsorbent (PFA) was bioinspired from the tapestry turban for purifying the dye-contaminated water. The PFA was prepared using an one-step method from nanocellulose (NC), amino-functionalized ZIF-8 (ZIF-8-NH2), and high resilience polyurethane foam (PUF). It was applied to efficiently remove methyl orange (MO) and crystal violet (CV) dyes from dye-contaminated waste solutions. The maximum adsorption capacity of PFA for MO and CV was 225.9 mg/g (25 °C, pH = 2) and 41.6 mg/g (25 °C, pH = 10), respectively, which were acceptable as compared with the reported works. The dyes could be efficiently removed from various river water samples. After 5 cycles, the removal efficiencies of MO and CV decreased from 92.0% and 85.7% to 84.7% and 76.1%, respectively. Moreover, the PFA relied on pressure-driven force to release the purified water under a low pressure.

A novel, efficient and economical alternative for the removal of toxic organic, inorganic and pathogenic water pollutants using GO-modified PU granular composite

Multicomponent wastewater treatment utilising simple and cost-effective materials and methods is an important research topic. This study has reported the fabrication and utilisation of graphene oxide (GO) embedded granular Polyurethane (PU) (GOPU) adsorbent for the treatment of lead ion (Lead ion (Pb(II)), Methylene blue (MB), and E. coli. PU granules were wrapped with GO flakes to improve hydrophilicity, interaction with polluted water, cation-exchange reaction, and binding of pollutants on its surface. Synthesised GOPU granules were characterised by X-Ray Diffraction (XRD), Raman, Fourier transform infrared (FTIR) spectroscopy, and Scanning electron microscopy (SEM) analysis to ensure the successful synthesis of GO and fabrication of GOPU granules. Further, batch and continuous adsorption processes were studied in different operating conditions to evaluate the performance of GOPU granules in practical applications. The kinetic and isotherm analyses revealed that the adsorption of Lead (Pb(II)) ion and Methylene Blue (MB) dye followed the Freundlich and Langmuir isotherm models, respectively, and they showed good agreement with the Pseudo-second-order kinetic model. The adsorption capacities of GOPU granules for the elimination of Pb(II) and MB dye were about 842 mg/g and 899 mg/g, respectively. Additionally, investigations into the fixed bed column revealed that the adsorption column performed best at a flow rate of 5 mL/min and a bed height of 6 cm. Pb(II) adsorption had a bed uptake capacity (q_bed) of 88 mg/g and percentage removal efficiency (%R) of 76%. Similarly, MB adsorption had a bed uptake capacity of 202 mg/g and a percentage removal efficiency of 71%. A systematic invention on antibacterial activity toward E. coli showed that The GOPU granules have a removal efficiency of about 100% at an exposure of 24 h. These findings indicated the possible use of GOPU granules as promising adsorbents for various water pollutants.

Single/co-adsorption and mechanism of methylene blue and lead by β-cyclodextrin modified magnetic alginate/biochar

Due to the high biological toxicity, the concurrent elimination of lead (Pb (II)) and methylene blue (MB) has become a challenging problem. Therefore, a newly β-cyclodextrin (β-CD) modified magnetic alginate/biochar (β-CD@MBC_P) material was developed. Comprehensive characterizations proved the successful coating of β-CD onto MBC_P surface by microwave-aided fabrication. The β-CD@MBC_P achieved high-efficiency uptake for contaminants under a wide pH scope. In the dual system, Pb (II) elimination was facilitated with the presence of MB, due to the active sites provided by MB. In the presence of Pb (II), MB uptake was inhibited due to the electrostatic repulsion between positively charged MB and Pb (II). Electrostatic attraction and complexation contributed to capturing Pb (II), while π-π interactions, host-guest effect, and H-bonding were important in MB elimination. After four cycles, β-CD@MBC_P maintained comparatively good renewability. Findings demonstrated that β-CD@MBC_P could be an effective remediation material for Pb (II)/MB adsorption from aqueous environments.

Chitosan-based composite hydrogel with a rigid-in-flexible network structure for pH-universal ultra-efficient removal of dye

Polysaccharide-based hydrogel adsorbents become popular because of their high adsorption capacity and fast adsorption rate, but their low removal rate and poor pH resistance have always been fatal shortcomings. Herein, a feasible strategy was proposed to strengthen the ability of hydrogel adsorbent to remove organic pollutants (i.e., dye) by incorporating natural rectorite (REC) into chitosan-g-poly (2-acrylamido-2-methyl-propane-sulfonic-acid) hydrogel network to form a rectorite-in-polymer network structure. The introduction of less dosage of REC (1.2 wt%) into the hydrogel facilitates to improve its adsorption capacities toward methylene blue (MB) in deionized water, tap water, seawater, Yangtze River water, and Yellow River water (1083.39-1303.49 mg/g); while incorporating higher content of REC (15.8 wt% REC) helps to improve the removal rate (99.6 % for MB in real waters), which are greatly superior to commercial activated carbons. The adsorbent keeps high adsorption efficiency in a broad pH range (2-11), and can be reused for >4 times.

Preparation of magnetic Co–Fe layered double hydroxides and its adsorption properties for the removal of methyl orange

In this study, Co–Fe layered double hydroxides are prepared by a hydrothermal method. The Co–Fe layered double hydroxides are used as an adsorbent for the investigation of the thermodynamic parameters and adsorption kinetics of methyl orange from aqueous solution. The results show that adsorption is affected by adsorbent dosage, adsorption time, and temperature. The characteristics of samples are investigated using X-ray powder diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, and N2 adsorption–desorption isotherms. The adsorption saturation level of Co–Fe layered double hydroxides on methyl orange is studied, with the results showing that the maximum uptake capacity for methyl orange is 10.21 mg g−1 based on Co–Fe layered double hydroxides. The adsorption kinetics of methyl orange is consistent with the Temkin isotherm equation and quasi-secondary kinetic model. Furthermore, separation is easily accomplished under the action of an applied magnetic field. The prepared Co–Fe layered double hydroxides can be applied as an effective adsorbent for decontamination of anionic dyes in industrial effluents.

Construction and Adsorption Performance Study of GO-CNT/Activated Carbon Composites for High Efficient Adsorption of Pollutants in Wastewater

Based on the increasing application requirements for the efficient adsorption of wastewater pollutants, graphene oxide-carbon nanotube/activated carbon (GO-CNT/AC) composites are constructed from the optimal microstructure matching of GO, CNTs, and AC materials by solution impregnation and freeze-drying methods. Three-dimensional structures with nano-micro hierarchical pores are established, with GO and CNTs uniformly dispersed on the AC surface, effectively restrain the agglomeration. The added CNTs played a "spring" role, supporting the gap between the GO sheets and AC matrix. Meanwhile, stable links are formed between GO, CNTs, and AC, realizing the synergistic matching of the microstructure, which provides abundant active absorption sites beneficial for improving the adsorption performance. The influences of the CNT contents, adsorbent amounts, methylene blue (MB) concentrations, and pH values on the adsorption property of GO-CNT/AC composites are systematically investigated. The results show that when the pH value of the MB solution is 13, the CNT concentration is 3 mg/mL and the MB concentration is 200 mg/L, the adsorption property of the composite is the best, with an adsorption capacity of 190.8 mg/g and a removal percentage of 95.4%. Compared with the raw AC, the adsorption capacity and removal percentage of the composites are increased by 73.9% and 72.8%, respectively. The GO-CNT/AC composites exhibit excellent cyclic adsorption performance, with a cyclic stability of 91.8% after six rounds of adsorption-desorption cycles. The kinetic analysis shows that the adsorption process conforms to the PSO kinetic model. By fitting of the IPD model, the adsorption mechanisms of the GO-CNT/AC composites are divided into two adsorption stages and described respectively. This study provides a new way to achieve highly efficient adsorption of pollutants in wastewater.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Chitosan-based dual network composite hydrogel for efficient adsorption of methylene blue dye

With the rapid development of the textile industry, a large amount of dyeing wastewater discharge has caused great harm to the ecological environment. In this work, a dual-network, composite hydrogel adsorbent with excellent mechanical properties, good reusability, and large adsorption capacity was prepared by introducing chitosan cross-linked polyvinylamine into the N,N'-methylenebisacrylamide cross-linked polyacrylic acid network. The dual cross-linking network gave the hydrogel excellent mechanical properties with maximum tensile stress and strain up to 1.9 MPa and 920 %. The adsorption capacity of methylene blue on hydrogel was up to 596.14 mg/g. In addition, the prepared hydrogel exhibited good reusability, and their adsorption efficiency remained above 85 % in five consecutive cycles. The adsorption behavior was well fitted by Pseudo-second-order kinetics and the Langmuir equation, indicating that the hydrogel was chemisorbed to the dye as a monolayer. The adsorption mechanism analysis showed that the electrostatic interactions and hydrogen bonding between the functional groups of the hydrogels and methylene blue molecules contributed to the good adsorption capacity. Overall, the synthesized composite hydrogels could be used as an efficient adsorbent for the removal of methylene blue dye, particularly from textile industry wastewater.

One-Pot Synthesis of Cellulose/MXene/PVA Foam for Efficient Methylene Blue Removal

Ti₃C₂T_x MXene has attracted considerable interest as a new emerging two-dimensional material for environmental remediation due to its high adsorption capacity. However, its use is greatly limited by its poor mechanical properties, low processability and recyclability, and the low dispersity of such powder materials. In this work, a porous adsorbent (C–CMP) containing cellulose nanocrystals (CNC), Ti₃C₂T_x MXene and polyvinyl alcohol (PVA) was prepared by a simple and environmentally-friendly foaming method. Glutaraldehyde was used as crosslinker to improve the mechanical properties and boost the adsorption efficiency of methylene blue (MB) molecules. Fourier transform infrared (FT–IR), elemental analysis (EDX) and thermogravimetric analysis (TGA) further confirmed that the preparation of the C–CMP foam and cross-linking reaction were successful. Scanning electron microscope (SEM) indicated that the macropores were distributed homogeneously. The adsorption experiment showed that maximum adsorption capacity of MB can reach 239.92 mg·g⁻¹ which was much higher than anionic dye (methyl orange, 45.25 mg·g⁻¹). The adsorption behavior fitted well with the Langmuir isotherm and pseudo-second-order kinetic models. Thermodynamic analysis indicated that the adsorption process was spontaneous and endothermic. Based on FT–IR, EDX and X-ray photoelectron spectroscopy (XPS) analysis, the adsorption mechanism between C–CMP and MB molecules was attributed to electrostatic interaction.

Carboxylate-functionalized dragon fruit peel powder as an effective adsorbent for the removal of Rhodamine B (cationic dye) from aqueous solution: adsorption behavior and mechanism

In this study, we used a simple and low-toxicity chemical treatment to make a carboxylate-functionalized dragon fruit peel powder (CF-DFPP) from dragon fruit peel to improve its capacity for adsorbing Rhodamine B (RhB) from an aqueous medium. Field Emission-Scanning Electron Microscopy/Energy-Dispersive X-ray (FE-SEM/EDX), point of zero charges (pH_PZC), Brunauer-Emmett-Teller (BET), and Fourier Transform Infrared (FT-IR) analyses were performed to characterize the adsorbent materials. The adsorption performance and mechanism for the removal of RhB were examined. The kinetic, isotherm and thermodynamic parameters were employed to evaluate the adsorption mechanism. Compared to other models, the Langmuir isotherm and PSO kinetic models better defined the experimental data. CF-DFPP adsorbent exhibited a maximum adsorption efficiency of 228.7 mg/g at 298 K for RhB adsorption. Thermodynamic analysis revealed that the adsorption of RhB by CF-DFPP was spontaneous (ΔG^o < 0) and exothermic (ΔH^o < 0) nature of the process. Different eluting agents were used in desorption tests, and NaOH was revealed to have greater desorption efficiency (96.8%). Furthermore, regeneration examinations revealed that the biosorbent could effectively retain RhB, even after six adsorption/desorption cycles. These findings demonstrated that the CF-DFPP might be a novel material for removing RhB from an aqueous medium.

Peroxymonosulfate activation by algal carbocatalyst for organic dye oxidation: Insights into experimental and theoretical

Preparation of nitrogen-doped algal carbocatalyst (NC) for peroxymonosulfate (PMS) activation to oxidative degrade methylene blue (MB), and the mechanism of radical and nonradical pathway in N-C/PMS system are investigated. Firstly, a series of N-doped carbonaceous materials (NC) were prepared using nitrogen-rich Taihu blue algae biomass as precursor at different annealing temperatures. It was found that the NC prepared by annealing at 800 °C (N-C-8) showed an optimal MB degradation performance of over 99% after 60 min. Confirmed by electron paramagnetic resonance (EPR) analyses and radical quenching experiments, radical and nonradical pathway (¹O₂ oxidation and electron-transfer) are both involved in MB degraded process. Moreover, both graphitic N derived from the intrinsic Taihu blue algae, and nitrogen vacancy evolved from nitrogen dopants decomposition exhibited high correlation with the MB removal rate in the N-C/PMS system. Finally, three possible degradation pathways of MB were proposed based on the Density Functional Theory (DFT) calculation and identified intermediates. Overall, this work provides a new insight into the intrinsic roles of nitrogen-dopants and nitrogen vacancies on the as-prepared carbocatalyst for PMS activation, and advances the understanding of the resource utilization of algal biomass.

The construction of a seaweed-based antibacterial membrane loaded with nano-silver based on the formation of a dynamic united dual network structure

A nano-silver based antibacterial membrane was obtained through a united dual network structure.

A Brief Introduction to the Polyurethanes According to the Principles of Green Chemistry

Polyurethanes are most often called “green” when they contain natural, renewable additives in their network or chemical structure, such as mono- and polysaccharides, oils (mainly vegetable oils), polyphenols (e.g., lignins, tannins), or various compounds derived from agro-waste white biotechnology (Principle 7). This usually results in these polyurethanes obtained from less hazardous substrates (Principle 4). Appropriate modification of polyurethanes makes them susceptible to degradation, and the use of appropriate processes allows for their recycling (Principle 10). However, this fulfilment of other principles also predisposes them to be green. As in the production of other polymer materials, the synthesis of polyurethanes is carried out with the use of catalysts (such as biocatalysts) (Principle 9) with full control of the course of the reaction (Principle 11), which allows maximization of the atomic economy (Principle 2) and an increase in energy efficiency (Principle 6) while minimizing the risk of production waste (Principle 1). Moreover, traditional substrates in the synthesis of polyurethanes can be replaced with less toxic ones (e.g., in non-isocyanate polyurethanes), which, at the same time, leads to a non-toxic product (Principle 3, Principle 5). In general, there is no need for blocking compounds to provide intermediates in the synthesis of polyurethanes (Principle 8). Reasonable storage of substrates, their transport, and the synthesis of polyurethanes guarantee the safety and the prevention of uncontrolled reactions (Principle 12). This publication is a summary of the achievements of scientists and technologists who are constantly working to create ideal polyurethanes that do not pollute the environment, and their synthesis and use are consistent with the principles of sustainable economy.