Zn-MOF decorated bio activated carbon for photocatalytic degradation, oxygen evolution and reduction catalysis

Enhanced electrocatalytic activity in MOFs-derived 3D hollow NiCo-LDH nanocages decorated porous biochar for simultaneously ultra-sensitive electrochemical sensing of Cu2+ and Hg2

Layered double hydroxides (LDHs) have attracted significant attention due to their compositional and structural flexibility. However, it is challenging but meaningful to design and fabricate hierarchical mixed-dimensional LDHs with synergistic effects to increase the electrical conductivity of LDHs and promote the intrinsic activity. Herein, 3D hollow NiCo-LDH nanocages decorated porous biochar (3D NiCo-LDH/PBC) has been synthesized by using ZIF-67 as precursor, which was utilized for constructing electrochemical sensing platform to realize simultaneous determination of Cu2+ and Hg2+. The 3D NiCo-LDH/PBC possessed the characteristics of hollow material and three-dimensional porous material, revealing a larger surface area, more exposed active sites, and faster electron transfer, which is beneficial to enhancing its electrochemical performance. Consequently, the developed sensor displayed good performance for simultaneously detecting Cu2+ and Hg2+ with ultra-low limit of detection (LOD) of 0.03 μg L-1 and 0.03 μg L-1, respectively. The proposed sensor also demonstrated excellent stability, repeatability and reproducibility. Furthermore, the sensor can be successfully used for the electrochemical analysis of Cu2+ and Hg2+ in lake water sample with satisfactory recovery, which is of great feasibility for practical application.

Construction of 2D/2D S-scheme Bi2MoO6/Zn-TCPP heterojunction via in-situ self-assembly growth strategy to enhance interface effect for efficient photocatalytic hydrogen production

Two-dimensional/two-dimensional (2D/2D) heterojunctions are considered to be an effective strategy for forming strong interface effects and facilitating photogenerated carrier separation. However, it is usually limited by the size mismatch of the materials, even at the expense of its redox capability. Herein, 2D/2D S-scheme heterojunction photocatalyst Bi2MoO6/Zn-TCPP (BMO/ZTP) composed of 2D Bi2MoO6 and 2D Zn-TCPP (TCPP: tetrakis (4-carboxyphenyl) porphyrin) (MOFs) was constructed by in-situ self-assembly growth strategy. The size-compatible 2D/2D composites had abundant surface active sites and strong interactions. In addition, band bending and interfacial electric field (IEF) effect based on S-scheme heterojunction could accelerate the separation and migration of photogenerated carriers in BMO/ZTP. The best hydrogen precipitation rate of the BMO/ZTP was 10900.94 umol·g-1·h-1, which was 38.90 and 3.24 times higher than that of Bi2MoO6 (280.26 umol·g-1·h-1) and Zn-TCPP (3360.34 umol·g-1·h-1), respectively. The results indicated that 2D/2D BMO/ZTP S-scheme heterojunction could enhance the interface effect and retain strong reducing electrons to achieve efficient photocatalytic hydrogen production, which was confirmed by ultraviolet photoelectron spectroscopy (UPS), Tafel curve, electron spin resonance (ESR) and time-resolved photoluminescence (TRPL) characterization and density functional theory (DFT) calculations. This work provided a general strategy for constructing 2D Bi2MoO6 and 2D MOFs S-scheme heterojunctions to enhance interface effects for achieving efficient photocatalytic hydrogen production.

Ratiometric emission of Tb(III)-functionalized Cd-based layered MOFs for portable visual detection of trace amounts of diquat in apples, potatoes and corn

Diquat (DQ) is a typical bipyridine herbicide widely used to control weeds in fields and orchards. The severe toxicity of diquat poses a serious threat to the environment and human health. Metal-organic frameworks (MOFs) have received widespread attention due to their unique physical and chemical properties and applications in the detection of toxic and harmful substances. In this work, a two-dimensional (2D) Tb(III) functionalized MOF Tb(III)@1 (1 = [Cd(HTATB)(bimb)]n·H2O (Cd-MOF), H3TATB = 4,4',4″-triazine-2,4,6-tribenzoicacid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene) has been prepared and characterized. Tb(III)@1 has excellent optical properties and high water and chemical stability. After the Tb(III) is fixed by the uncoordinated -COO- in the 1 framework, Tb(III)@1 emits the typical green fluorescence of the lanthanide ion Tb(III) through the "antenna effect". It is worth noting that Tb(III)@1 can be used as a dual emission fluorescence chemical sensor for the ratio fluorescence detection of pesticide DQ, exhibiting a relatively low detection limit of 0.06 nM and a wide detection range of 0-50 nM. After the addition of DQ, a rapid color change of Tb(III)@1 fluorescence from green to blue was observed due to the combined effects of IFE, FRET and dynamic quenching. Therefore, a simple test paper box has been designed for direct on-site determination of pesticide DQ. In addition, the developed sensor has been successfully applied to the detection of DQ in real samples (fruits a Yin-Xia Sun and Bo-Tao Ji contributed equally to this work and should be considered co-first authors.nd vegetables) with satisfactory results. The results indicate that the probe developed in this study has broad application prospects in both real sample detection and actual on-site testing.

Metal-Organic Frameworks-Derived Nanocarbon Materials and Nanometal Oxides for Photocatalytic Applications

Harnessing low-density solar energy and converting it into high-density chemical energy through photocatalysis has emerged as a promising avenue for the production of chemicals and remediation of environmental pollution, which contributes to alleviating the overreliance on fossil fuels. In recent years, metal-organic frameworks (MOFs) have gained widespread application in the field of photocatalysis due to their photostability, tunable structures, and responsiveness in the visible light range. However, most MOFs exhibit relatively low response to light, limiting their practical applications. MOFs-derived nanomaterials not only retain the inherent advantages of pristine MOFs but also show enhanced light adsorption and responsiveness. This review categorizes and summarizes MOFs-derived nanomaterials, including nanocarbons and nanometal oxides, providing representative examples for the synthetic strategies of each category. Subsequently, the recent research progress on MOFs-derived materials in photocatalytic applications are systematically introduced, specifically in the areas of photocatalytic water splitting to H2, photocatalytic CO2 reduction, and photocatalytic water treatment. The corresponding mechanisms involved in each photocatalytic reaction are elaborated in detail. Finally, the review discusses the challenges and further directions faced by MOFs-derived nanomaterials in the field of photocatalysis, highlighting their potential role in advancing sustainable energy production and environmental remediation.

Photocatalytic degradation of tetracycline using a novel WO3-ZnO/AC under visible light irradiation: Optimization of effective factors by RSM-CCD

Mitigating pharmaceutical pollution in the global environment is imperative, and tetracycline (TC) is a commonly utilized antibiotic in human and veterinary medicine. The persistent existence of TC highlights the necessity of establishing efficient measures to protect water systems and the environment from detrimental contaminants. Herein, a novel rhubarb seed waste-derived activated carbon-supported photocatalyst (WO3-ZnO/RUAC) was synthesized by combining wet impregnation and ultrasonic methods. The activated carbon (AC) was obtained from rhubarb seed waste for the first time via chemical activation. The function of AC as an electron acceptor and in separating electron-hole pairs was illuminated by characterization analyses that included XRD, FTIR, XPS, SEM, TEM, PL, EIS, TPC, and UV-DRS. Using the response surface methodology-central composite design (RSM-CCD) technique, the synthesis parameters of the composite were systematically optimized. Under ideal conditions, with a TC concentration of 33 mg. L-1, pH of 4.57, irradiation time of 108 min, and catalyst dose of 0.85 g. L-1, the highest degradation efficiency of TC by this composite, achieved 96.5%, and it was reusable for five cycles. Subsequently, trapping tests and electron spin resonance (ESR) analysis were conducted, elucidating that •OH and •O2- radicals played pivotal roles in the photocatalytic degradation of TC. This research offers valuable insights into utilizing the AC-based photocatalyst to degrade pharmaceutical micropollutants effectively.

In-situ synthesis of ZIF-8 on magnetic pineapple leaf biochar as an efficient and reusable adsorbent for methylene blue removal from wastewater

The presence of organic dyes in aquatic systems poses a significant threat to ecosystems and human well-being. Due to recycling challenges, traditional commercial activated carbon is not cost-effective. To address this, an imidazolate acid zeolite framework-8 (ZIF-8)-modified magnetic adsorbent (ZMPLB-800) was synthesized through the in-situ formation of ZIF-8 and subsequent carbonization at 800 °C, using magnetic pineapple leaf biochar (MPLB) as a carrier. The porous structure of ZMPLB-800 facilitates the rapid passage of dye molecules, enhancing adsorption performance. ZMPLB-800 exhibited remarkable adsorption capacity for methylene blue (MB) across a pH range of 3-13, with a maximum adsorption capacity of 455.98 mg g-1. Adsorption kinetics and thermodynamics followed the pseudo-second-order kinetic model and Langmuir isotherm model. Mechanisms of MB adsorption included pore filling, hydrogen bonding, electrostatic interactions, π-π interactions, and complexation through surface functional groups. Additionally, ZMPLB-800 demonstrated excellent regeneration performance, recording a removal efficiency exceeding 87% even after five adsorption/desorption cycles. This study provides a novel strategy for treating dye wastewater with MOF composites, laying the foundation for waste biomass utilization.

Metal-organic framework-based advanced therapeutic tools for antimicrobial applications

The escalating concern over conventional antibiotic resistance has emphasized the urgency in developing innovative antimicrobial agents. In recent times, metal-organic frameworks (MOFs) have garnered significant attention within the realm of antimicrobial research due to their multifaceted antimicrobial attributes, including the sustained release of intrinsic or exogenous antimicrobial components, chemodynamically catalyzed generation of reactive oxygen species (ROS), and formation of photogenerated ROS. This comprehensive review provides a thorough overview of the synthetic approaches employed in the production of MOF-based materials, elucidating their underlying antimicrobial mechanisms in depth. The focal point lies in elucidating the research advancements across various antimicrobial modalities, encompassing intrinsic component release system, extraneous component release system, auto-catalytical system, and energy conversion system. Additionally, the progress of MOF-based antimicrobial materials in addressing wound infections, osteomyelitis, and periodontitis is meticulously elucidated, culminating in a summary of the challenges and potential opportunities inherent within the realm of antimicrobial applications for MOF-based materials. STATEMENT OF SIGNIFICANCE: Growing concerns about conventional antibiotic resistance emphasized the need for alternative antimicrobial solutions. Metal-organic frameworks (MOFs) have gained significant attention in antimicrobial research due to their diverse attributes like sustained antimicrobial components release, catalytic generation of reactive oxygen species (ROS), and photogenerated ROS. This review covers MOF synthesis and their antimicrobial mechanisms. It explores advancements in intrinsic and extraneous component release, auto-catalysis, and energy conversion systems. The paper also discusses MOF-based materials' progress in addressing wound infections, osteomyelitis, and periodontitis, along with existing challenges and opportunities. Given the lack of related reviews, our findings hold promise for future MOF applications in antibacterial research, making it relevant to your journal's readership.

Laser-Driven Rapid Synthesis of Metal-Organic Frameworks and Investigation of UV-NIR Optical Absorption, Luminescence, Photocatalytic Degradation, and Gas and Ion Adsorption Properties

In this study, we designed a platform based on a laser-driven approach for fast, efficient, and controllable MOF synthesis. The laser irradiation method was performed for the first time to synthesize Zn-based MOFs in record production time (approximately one hour) compared to all known MOF production methods with comparable morphology. In addition to well-known structural properties, we revealed that the obtained ZnMOFs have a novel optical response, including photoluminescence behavior in the visible range with nanosecond relaxation time, which is also supported by first-principles calculations. Additionally, photocatalytic degradation of methylene blue with ZnMOF was achieved, degrading the 10 ppm methylene blue (MB) solution 83% during 1 min of irradiation time. The application of laser technology can inspire the development of a novel and competent platform for a fast MOF fabrication process and extend the possible applications of MOFs to miniaturized optoelectronic and photonic devices.

Recent Progress in 2D Metal-Organic Framework-Related Materials

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

A Chiral Nanocomplex for Multitarget Therapy to Alleviate Neuropathology and Rescue Alzheimer's Cognitive Deficits

Alzheimer's disease (AD) is a severe neurodegenerative condition characterized by inflammation, beta-amyloid (Aβ) plaques, and neurodegeneration, which currently lack effective treatments. Chiral nanomaterials have emerged as a promising option for treating neurodegenerative disorders due to their high biocompatibility, strong sustained release ability, and specific enantiomer selectivity. The development of a stimulus-responsive chiral nanomaterial, UiO-66-NH2 @l-MoS2 QDs@PA-Ni (MSP-U), for the treatment of AD is reported. MSP-U is found to stimulate neural stem cell (NSCs) differentiation, promote in situ hydrogen (H2 ) production, and clear Aβ plaques. l-MoS2 QDs modified with l-Cysteine (l-Cys) effectively enhance the differentiation of NSCs into neurons through circularly polarized near-infrared radiation. Doped-phytic acid nickel (PA-Ni) improves the activity of l-MoS2 QDs in scavenging reactive oxygen species at the lesion site via photocatalytic H2 production. Loading l-MoS2 QDs with UiO-66 type metal oxide suppresses electron-hole recombination effect, thereby achieving rapid charge separation and improving transport of photogenerated electrons, leading to significantly improved H2 production efficiency. The photothermal effect of MSP-U also clears the generated Aβ plaques. In vivo evaluations show that MSP-U improves spatial cognition and memory, suggesting a promising potential candidate for the treatment of AD using chiral nanomaterials.

Emerging Pristine MOF-Based Heterostructured Nanoarchitectures: Advances in Structure Evolution, Controlled Synthesis, and Future Perspectives

Metal-organic frameworks (MOFs) can be customized through modular assembly to achieve a wide range of potential applications, based on their desired functionality. However, most of the initially reported MOFs are limited to microporous systems and are not sufficiently stable, which restricts their popularization. Heterogeneity is introduced into a simple MOF framework to create MOF-based heterostructures with fascinating properties and interesting functions. Heterogeneity can be introduced into the MOFs via postsynthetic/ligand exchange. Although the ligand exchange has shown potential, it is difficult to precisely control the degree of exchange or position. Among the various synthesis strategies, hierarchical assembly is particularly attractive for constructing MOF-based heterostructures, as it can achieve precise regulation of MOF-based heterostructured nanostructures. The hierarchical assembly significantly expands the compositional diversity of MOF-based heterostructures, which has high elasticity for lattice matching during the epitaxial growth of MOFs. This review focuses on the synthetic evolution mechanism of hierarchical assemblies of MOF-based nanoarchitectures. Subsequently, the precise control of pore structure, pore size, and morphology of MOF-based nanoarchitectures by hierarchical assembly is emphasized. Finally, possible solutions to address the challenges associated with heterogeneous interfaces are presented, and potential opportunities for innovative applications are proposed.

Highly fluorescent nickel based metal organic framework for enhanced sensing of Fe3+ and Cr2O72- ions

Heavy metal contamination has sparked widespread concern among the populace. The significant issues necessitate the creation of high-performance fluorescent pigments that can identify harmful elements in water. The present study deals with metal organic framework [MOF] based on nickel [Ni-BDC MOF]. The Ni-BDC MOF was prepared by facile solvothermal method using nickel nitrate hexahydrate and terephthalic acid ligand as precursors. The MOF was characterized by various techniques in order to examine the crystal, morphological, structural, composition, thermal and optical properties. The detailed characterizations revealed that the synthesized Ni-BDC MOF are well-crystalline with high purity and possessing 3D rhombohedral microcrystals with rough surface. The MOF demonstrate good luminescence performance and excellent water stability. According to the Stern Volmer plot, the tests set up under optimized conditions demonstrate a linear correlation between the fluorescence intensity and concentration of both ions, i.e. Fe³⁺, and Cr₂O₇^2- ions. The linear range and detection limit for Fe³⁺ and Cr₂O₇^2- were found to be 0-1.4 nM and 0.159 nM, and 0-1 nM and 0.120 nM, respectively. The mechanisms for the selective detection of cations and anions were also explored. The recyclability for the prepared MOF was checked up to five cycles which showed excellent stability with just a slight reduction in efficiency. The constructed sensor was also used to assess the presence of Fe³⁺ and Cr₂O₇^2- ions in actual water samples. The results of the different experiments revealed that the prepared MOF is a good material for detecting Fe³⁺ and Cr₂O₇^2- ions.

MIL-100(Fe)/g-C3N4 composites with enhanced photocatalytic activity for UO22+ reduction under visible light

As a clean energy source, nuclear energy can gradually replace traditional fossil energy sources, and is an important means to achieve the "double carbon goal". Uranium-containing wastewater is inevitable in the development of nuclear energy. The composites MIL/CNx of MOF material MIL-100(Fe) and carbon nitride (CN) were obtained by a simple solvo-thermal method using iron nitrate, homophthalic acid and CN. The material MIL-100(Fe) with high specific surface area was compounded with CN to increase the in-plane adsorption sites, which could adsorb 30% of uranium in solution during the dark reaction. The close interfacial contact of the two materials effectively inhibited the complexation of photo-generated electrons and holes and promotes electron migration. These two synergistic effects improved their overall photocatalytic reduction capacity, which could reduce 97% of UO₂²⁺ in solution in 20 min. The UO₂²⁺ removal efficiency of MIL/CN_0.1 was 2.3 and 1.6 times higher than that of CN and MIL-100(Fe), respectively. In addition, MIL/CN_0.1 was stable in reducing uranium during the five cycles of the experiment.

Two novel zinc-based MOFs as luminescence sensors to detect phenylglyoxylic acid

Automobile exhaust gases, plastic pollutants, smoking, and other harmful substances can cause serious harm to human beings and the environment. Styrene, as a common airborne toxin, enters the human body through breathing or the skin and is discharged in the form of phenylglyoxylic acid (PGA). Therefore, specific, sensitive and trace detection of PGA is particularly important. Here, two zinc-based metal-organic frameworks {[Zn₂L₁(DMF)₂H₂O](DMF)₂H₂O}_n, {[Zn₄(L₂)₂(DMF)₂(H₂O)₃](DMF)₈}_n (L₁ = 2,5-bis((3-carboxylphenyl)amino)terephthalic acid, L₂ = 2,5-bis((4-carboxyphenyl)amino)terephthalic acid) have been reported as 1 and 2, respectively. Both 1 and 2 present 3D structures, which can both be simplified as 4,4,4-c net topology. It is worth mentioning that 2 has two different kinds of Zn SBUs as connecting nodes in the structure. Besides, compared with the other materials for the detection of PGA, 1 and 2 exhibit relatively low detection limits (LODs), both in water and in urine (where the LODs for 1 in water and urine were 0.33 μM and 0.43 μM in the range of 0-0.39 mM, and those for 2 were 0.28 μM and 0.49 μM in the range of 0-0.59 mM, respectively). In addition, the sensors have excellent anti-interference ability, high stability, rapid response, and can easily distinguish between different concentrations of PGA with the naked eye. The developed paper probes were suitable for practical sensing applications for portable detection of PGA in urine.

Role of persistent free radicals and lewis acid sites in visible-light-driven wet peroxide activation by solid acid biochar catalysts - A mechanistic study

We report the synthesis of H₂SO₄-modified biochars (SBCs) as solid-acid catalysts to activate H₂O₂ at circumneutral pH under visible light radiation. Spent coffee grinds were pyrolyzed with TiO₂ at 300, 500 and 600 °C followed by steeping in 5 M H₂SO₄ and were used for the Fenton-like degradation of methyl orange (MO). The catalytic activity of SBC depended on the pyrolysis temperature and correlated well with the surface acidity and persistent free radical (PFR) concentration. Results showed that a complete MO removal and a TOC reduction of 70.2% can be achieved with SBC500 under photo-Fenton conditions. However, poisoning of the Lewis acid sites on SBC by PO₄^3- led to a dramatic decrease in the removal of MO with inhibition effects more pronounced than with radical scavengers, suggesting the key role played by acid-sites on the activation of H₂O₂. Finally, electron paramagnetic resonance (EPR) studies identified •OH as the key transient in the degradation followed by •O₂^- and ¹O₂. These findings suggest that H₂O₂ was likely adsorbed on the surface oxygenated functional groups before being decomposed by accepting electrons from the PFRs on the SBC surface.

Photoelectrochemical Water Oxidation over Novel Semiconducting Zinc-Based Metal-Thiolate Framework

Designing an efficient catalyst for a sustainable photoelectrochemical water oxidation reaction is very challenging in the context of renewable energy research. Here, we have introduced a new semiconducting porous zinc-thiolate framework via successful stitching of an "N" donor linker with a triazine-based tristhiolate secondary building unit in the overall architecture. The introduction of both linker and tristhiolate ligand synergistically modifies the architecture by making it a rigid, crystalline, three-dimensional, thermally stable, and porous framework. Our novel zinc-thiolate framework is used as an n-type semiconductor as revealed from the solid-state UV-vis DRS spectroscopic analysis, ac and dc conductivity analysis, and Mott-Schottky plot. This n-type semiconductor-based zinc-thiolate framework is utilized in the photoelectrochemical water oxidation reaction. It displayed a very high efficiency for a visible-light-driven oxygen evolution reaction (OER) in a KOH medium using standard Ag/AgCl as the reference electrode. The superiority of this material was further revealed from the low onset potential (0.822 mV vs RHE), high photocurrent density (0.204 mA cm^-2), good stability, and high O₂ evolution rate (77 μmol g^-1 of oxygen evolution within 2 h), and a good efficiency (ABPE 0.42%, IPCE 29.6% and APCE 34.5%). Furthermore, the porosity in the overall framework seems to be a blessing to the photoelectrochemical performance due to better mass diffusion of the electrolyte. A detailed mechanism for the OER reaction was analyzed through density functional theory analysis suggesting the potential future of this Zn-thiolate framework for achieving a high efficiency in the sustainable water oxidation reaction.

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e-/h+), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

Activated Carbon-Loaded Titanium Dioxide Nanoparticles and Their Photocatalytic and Antibacterial Investigations

Activated carbon doping TiO2 nanoparticles were synthesised by zapota leaf extract using the co-precipitation method. The bio-constituents of plant compounds were used in the reactions of stabilization and reductions. The carbon loading on the TiO2 nanoparticles was characterised by XRD, FTIR, UV-DRS, SEM with EDX, and TEM analysis. The loading of activated carbon onto the TiO2 nanoparticles decreased the crystallite size and optical bandgap, and their doping improved the surface structure of AC/TiO2 nanoparticles. Mesoporous/microporous instability was remodified from the activated carbon, which was visualised using SEM and TEM analysis, respectively. The photocatalytic dye degradation of Rh-B dye was degraded in TiO2 and AC/TiO2 nanoparticles under visible light irradiation. The degradation efficiencies of TiO2 and AC/TiO2 nanoparticles were 73% and 91%, respectively. The bacterial abilities of TiO2 and AC/TiO2 nanoparticles were examined by E. coli and S. aureus. The water reclamation efficiency and bactericidal effect of TiO2 and AC/TiO2 nanoparticles were examined via catalytic dye degradation and bacterial efficiency of activated carbon-doped titanium dioxide nanoparticles.

Single-Step Synthesized Functionalized Copper Carboxylate Framework Meshes as Hierarchical Catalysts for Enhanced Reduction of Nitrogen-Containing Phenolic Contaminants

Nitrogen-containing phenolic contaminants (NCPCs) represent typical pollutants of industrial wastewaters. As catalytic reduction of NCPCs is a useful technique and Cu is an efficient metal catalyst, Cu-carboxylate frameworks (CuCF) are favorable materials. However, they are in powder form, making them difficult to use; thus, in this study, CuCF was grown on macroscale supports. Herein, we present a facile approach to develop such a CuCF composite by directly using a Cu mesh to grow CuCF on the mesh through a single-step electrochemical synthesis method, forming CuCF mesh (CFM). CFM could be further modified to afford CuCF mesh with amines (NH2) (CFNM), and CuCF mesh with carboxylates (COOH) (CFCM). These CuCF meshes are compared to investigate how their physical and chemical characteristics influenced their catalytic behaviors for reduction/hydrogenation of NPCPs, including nitrophenols (NPs) and dyes. Their nanostructures and surface properties influence their behaviors in catalytic reactions. In particular, CFCM appears to be the most efficient mesh for catalyzing 4-NP, with a much higher rate constant. CFCM also shows a significantly lower Ea (28.1 kJ/mol). CFCM is employed for many consecutive cycles, as well as convenient filtration-type 4-NP reduction. These CuCF meshes can also be employed for decolorization of methylene blue and methyl orange dyes via catalytic hydrogenation.

A metal-organic framework with rich accessible nitrogen sites for rapid dye adsorption and highly efficient dehydrogenation of formic acid

MOFs with adequate free nitrogen sites have potential applications in dye adsorption and formic acid dehydrogenation. Here, we successfully synthesized a novel 3-D MOF 1 ([(CH₃)₂NH₂][Cd(L)DMA]·0.5DMA·1.5H₂O) with a special two-fold interpenetrating framework through a simple solvothermal reaction between CdCl₂·1.5H₂O and a nitrogen-rich triangular tricarboxylate-based linker (H₃L, 4,4',4''-s-triazine-2,4,6-tribenzoic acid). After removing the guest molecules of dimethylacetamide (DMA) and H₂O, including the coordinated DMA from 1 by vacuum activation at 423 K, a compound named 1' with a formula of [(CH₃)₂NH₂][Cd(L)] and a similar interpenetrating framework structure was obtained. In comparison with compound 1, the total void volume of 1' is nearly doubled, and thus may provide higher potential for the adsorption of other guest molecules. Notably, the pyridine N atoms located in the middle of the triangular tricarboxylate-based linker are not involved in the coordination with Cd²⁺, and are all uniformly dispersed throughout the whole framework of the 3-D MOFs. Due to its unique structural features, the 3-D MOF 1' could effectively adsorb the cationic dye MB⁺ for recycling purposes. The rapid adsorption rate (0.7 × 10^-2 g mg^-1 min^-1) and the relatively high capacity (900 mg g^-1) for MB⁺ demonstrate the potential of 1' in dye adsorption. In addition, 1' may also be used as an effective support to immobilize PdAu NPs via the double-solvent method. The resultant catalyst Pd0.8Au0.2/1' exhibits decent catalytic activity for the dehydrogenation of formic acid with a TOF value of 1854 h^-1 at 333 K. The existence of a large void volume and accessible pyridine N atoms provide a suitable environment for achieving a high dispersion of PdAu NPs, thereby leading to the formation of a catalytically active and stable supported noble-metal NP catalyst for H₂ generation from formic acid decomposition.

Introduction of a Zn-based metal-organic framework @ biomass porous activated carbon as a high-sensitive coating for a stainless steel SPME fiber: application to the simultaneous analysis of nonsteroidal anti-inflammatory drugs

The present study introduces a high-efficiency nanocomposite material featuring a zinc-based metal-organic framework and a novel porous activated carbon derived from bread waste. The prepared nanocomposite, namely Zn-MOF-5@BHPAC, has been synthesized by a low-temperature hydrothermal process and coated onto the surface of a stainless steel wire with epoxy glue. The fabricated fiber has been employed as an SPME fiber applied in the extraction and pre-concentration of some nonsteroidal anti-inflammatory drugs (NSAIDs) before their high-performance liquid chromatography-ultraviolet (HPLC-UV) studies. The characterization studies were performed utilizing field emission scanning electron microscopy, elemental mapping, energy-dispersive X-ray spectroscopy, elemental analyzer, Fourier-transform infrared spectroscopy, and Brunauer-Emmett-Teller surface area analysis. Under the optimal conditions, the method demonstrated low detection limits (LODs, 0.06-0.15 µg L-1), wide linear ranges (LRs, 0.20-380 µg L-1) with good linearity (R2 > 0.991), good precisions (RSDs < 6.95%), and acceptable relative recoveries (RR > 85%). Using the green and affordable biomass of bread as a novel carbon-rich source is an innovative idea provided in this study. In addition, the hybridization of the obtained carbon-based material with the MOF compound to create a new high-capacity sorbent is another strength of the proposed method. Long service lifetime, economic efficiency, environmental friendliness, and high extraction capability were some of the other advantages of the suggested procedure. Therefore, the method can utilize successfully for the simultaneous determination of NSAIDs (as model analytes) in different matrixes.

Porphyrin-Based Two-Dimensional Layered Metal-Organic Framework with Sono-/Photocatalytic Activity for Water Decontamination

Water treatment is crucial to improve the water quality and reduce diarrheal and chronological diseases caused by excessive discharge of organic dyes and other waste. The development and expansion of efficient catalysts for the degradation and sterilization of organic dyes has attracted widespread attention. Herein, we report an example of a porphyrin-based two-dimensional layered metal-organic framework (MOF) (2DZnTcpp) and its efficient sono-/photocatalytic degradation of organic dyes and bactericidal activity. The dislocated layers effectively avoid close π-π stacking and provide a porous space for oxygen/water/dye contact. The introduction of Zn ions increases the spin orbital coupling through the heavy atom effect and promotes the intersystem crossing process for singlet oxygen generation. The effective ligand-to-metal charge transfer and the excessive open Zn catalytic sites also facilitate water splitting for hydroxyl radical generation. These features together promote the reactive oxygen species (ROS) generation of 2DZnTcpp under light illumination or ultrasound sonication. It is worth noting that the 2DZnTcpp with a high specific surface area and porosity shows efficient sono-/photocatalytic degradation of organic dye waste. Moreover, 2DZnTcpp could also largely inactivate Escherichia coli under light irradiation (the light power of 1 sun) or ultrasound sonication for 30 min with efficiencies over 99.99999%. This work provides an approach for the design and synthesis of MOF-based sono-/photocatalysts used in the purification and treatment of textile wastewater and is committed to the establishment of a more efficient, fast, and environmentally friendly catalytic system.