Green porous benzamide-like nanomembranes for hazardous cations detection, separation, and concentration adjustment

Impact of ibuprofen on nitrogen removal performance and its biotransformation in a coupled sulfur autotrophic denitrification and anammox system

Ibuprofen (IBU), a commonly used non-steroidal anti-inflammatory drug, is frequently detected in wastewater treatment systems, where it can interfere with nitrogen removal. This study investigated the effects of IBU on nitrogen removal performance and its biotransformation in a coupled sulfur autotrophic denitrification and anammox (SAD/A) system. Moreover, key parameters, such as nitrogen removal efficiency, microbial activity, community structure, and IBU degradation products, were carefully monitored. While IBU concentrations of up to 1 mg/L had negligible impacts on nitrogen removal efficiency due to the counteracting effects of slight inhibition on anammox and enhancement of sulfur autotrophic denitrification, a significant inhibition of ammonia removal occurred when the concentration increased to 10 mg/L. Quantum chemical analyses revealed that IBU underwent biotransformation through decarboxylation and hydroxylation pathways, leading to the formation of two biotransformation products with high ecological toxicity. This study is the first to elucidate the mechanisms by which IBU influences microbial communities and metabolic activities in SAD/A systems. In addition, it highlights the resilience of these systems in maintaining nitrogen removal efficiency under varying IBU concentrations, as well as the environmental risks posed by the biotransformation products of IBU.

In situ images of Cd2+ in rice reveal Cd2+ protective mechanism using DNAzyme fluorescent probe

As a common pollutant, cadmium (Cd) poses a serious threat to the growth and development of plants. Currently, there is no effective method to elucidate the protective mechanism of Cd2+ in plant cells. For the first time, we designed a Cd2+ fluorescent probe to observe the adsorption and sequestration of Cd2+ in rice cell walls and vacuoles. Specifically, Cd2+ is blocked by the Casparian strip and electrostatically attracted to hemicellulose, which is abundantly adsorbed and fixed to the cell walls of the endodermis. For Cd2+ that successfully entered the endodermis, one part entered the cells and was compartmentalised and fixed in the vacuoles, while the other part entered the vascular bundles and precipitated in the cell walls of the sclerenchyma through the ion exchange effect. Furthermore, with prolonged exposure to Cd2+, compartmentalised bodies that were strongly labelled by fluorescence gradually appeared in the vacuoles, which were assumed to be a new heavy metal protective mechanism activated by plants in response to continuous Cd2+ exposure. In conclusion, this study provides an innovative and effective method for the detection of adsorption, transportation, and accumulation of Cd2+ in plant tissues, which can be employed for the rapid identification of crops with low Cd accumulation.

Elucidating the impacts of cobalt (II) ions on extracellular electron transfer and pollutant degradation by anodic biofilms in bioelectrochemical systems during industrial wastewater treatment

Electrogenic biofilms in bioelectrochemical systems (BES) are critical in wastewater treatment. Industrial effluents often contain cobalt (Co2+); however, its impact on biofilms is unknown. This study investigated how increasing Co2+ concentrations (0-30 mg/L) affect BES biofilm community dynamics, extracellular polymeric substances, microbial metabolism, electron transfer gene expression, and electrochemical performance. The research revealed that as Co2+ concentrations increased, power generation progressively declined, from 345.43 ± 4.07 mW/m2 at 0 mg/L to 160.51 ± 0.86 mW/m2 at 30 mg/L Co2+. However, 5 mg/L Co2+ had less effect. The Co2+ removal efficiency in the reactors fed with 5 and 10 mg/L concentrations exceeded 99% and 94%, respectively. However, at 20 and 30 mg/L, the removal efficiency decreased substantially, likely because of reduced biofilm viability. FTIR indicated the participation of biofilm functional groups in Co2+ uptake. XPS revealed Co2+ presence in biofilms as CoO and Co(OH)2, indicating precipitation also aided removal. Cyclic voltammetry and electrochemical impedance spectroscopy tests revealed that 5 mg/L Co2+ had little impact on the electrocatalytic activity, while higher concentrations impaired it. Furthermore, at a concentration of 5 mg/L Co2+, there was an increase in the proportion of the genus Anaeromusa-Anaeroarcus, while the genus Geobacter declined at all tested Co2+ concentrations. Additionally, higher concentrations of Co2+ suppressed the expression of extracellular electron transfer genes but increased the expression of Co2+-resistance genes. Overall, this study establishes how Co2+ impacts electrogenic biofilm composition, function, and treatment efficacy, laying the groundwork for the optimized application of BES in remediating Co2+-contaminated wastewater.

Performance of NiO doped on alkaline sludge from waste photovoltaic industries for catalytic dry reforming of methane

Alkali sludge (AS) is waste abundantly generated from solar photovoltaic (PV) solar cell industries. Since this potential basic material is still underutilized, a combination with NiO catalyst might greatly influence coke resentence, especially in high-temperature thermochemical reactions (Arora and Prasad, RSC Adv. 6:108,668-108688, 2016). This paper investigated alkaline sludge containing 3CaO-2SiO2 doped with well-known NiO to enhance the dry reforming of methane (DRM) reaction. The wet-impregnation method was used to prepare the xNiO/AS (x = 5-15%) catalysts. Subsequently, all catalysts were tested by using X-ray diffraction (XRD), nitrogen adsorption/desorption (BET), temperature-programmed reduction of hydrogen (H2-TPR), temperature-programmed desorption of carbon dioxide (TPD-CO2), field emission scanning electron microscopy (FESEM-EDX), and X-ray photoelectron spectroscopy (XPS). The spent catalysts were analyzed by thermogravimetric analysis (TGA/DTG), transmission electron microscopy (TEM), and temperature-programmed oxidation (TPO). The catalytic performance of xNiO/AS catalysts was investigated in a fixed bed reactor connected with gas chromatography thermal conductivity detector (GC-TCD) at a CH4:CO2 flow rate of 30 mL-1 during a 10-h reaction by following (Shamsuddin et al., Int. J. Energy Res. 45:15,463-15,480, 2021d). For optimization parameters, the effects of NiO concentration (5, 10, and 15%), reaction temperature (700, 750, 800, 850, and 900 °C), catalyst loading (0.1, 0.2, 0.3, 0.4, and 0.5 g), and gas hourly space velocity (GHSV) range from 3000, 6000, 9000, 12,000, and 15,000 h-1 were evaluated. The results showed that physical characteristics such as BET surface area and porosity do not significantly impact NiO percentages of dispersion, whereas chemical characteristics like reducibility are crucial for the catalysts' efficient catalytic activity. Due to the active sites on the catalyst surface being more accessible, increased NiO dispersion resulted in higher reactant conversion. The catalytic performance on various parameters that showed 15%NiO/AS exhibited high reactant conversion up to 98% and 40-60% product selectivity in 700 °C, 0.2 g catalyst loading, and 12,000 h-1 GHSV. According to spent catalyst analyses, the catalyst was stable even after the DRM reaction. Meanwhile, increased reducibility resulted in more and better active site formation on the catalyst. Synergetic effect of efficient NiO as active metal and medium basic sites from AS enhanced DRM catalytic activity and stability with low coke formation.

Side effects of the addition of an adsorbent for the nitrification performance of a microbiome in the treatment of an antibiotic mixture

This work determined the effect of biochar (BC) as an adsorbent on the nitrifying microbiome in regulating the removal, transformation, fate, toxicity, and potential environmental consequences of an antibiotic mixture containing oxytetracycline (OTC) and sulfamethoxazole (SMX). Despite the beneficial role of BC as reported in the literature, the present study revealed side effects for the nitrifying microbiome and its functioning arising from the presence of BC. Long-term monitoring revealed severe disruption to nitratation via the inhibition of both nitrite oxidizers (e.g., Nitrospira defluvii) and potential comammox species (e.g., Ca. Nitrospira nitrificans). Byproducts (BPs) more toxic than the parent compounds were found to persist at a high relative abundance, particularly in the presence of BC. Quantitative structure-activity relationship modeling determined that the physicochemical properties of the toxic BPs significantly differed from those of OTC and SMX. The results suggested that the BPs tended to mobilize and accumulate on the surface of the solids in the system (i.e., the BC and biofilm), disrupting the nitrifiers growing at the interface. Collectively, this study provides novel insights, demonstrating that the addition of adsorbents to biological systems may not necessarily be beneficial; rather, they may generate side effects for specific bacteria that have important ecosystem functions.

Molecular probing of dissolved organic matter and its transformation in a woolen textile wastewater treatment station

Woolen textile industry produces enormous wastewater (WTIW) with high pollution loads, and needs to be treated by wastewater treatment stations (WWTS) before centralized treatment. However, WTIW effluent still contains many biorefractory and toxic substances; thus, comprehensive understandings of dissolved organic matter (DOM) of WTIW and its transformation are essential. In this study, total quantity indices, size exclusion chromatography, spectral methods, and Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) were used for comprehensively characterizing DOM and its transformation during full-scale treatments, including influent, regulation pool (RP), flotation pool (FP), up-flow anaerobic sludge bed (UA), anaerobic/oxic (AO) and effluent. DOM in influent featured a large molecular weight (5-17 kDa), toxicity (0.201 HgCl₂ mg/L), and a protein content of 338 mg C/L. FP largely removed 5-17 kDa DOM with the formation of 0.45-5 kDa DOM. UA and AO removed 698 and 2042 chemicals, respectively, which were primarily saturated components (H/C > 1.5); however, both UA and AO contributed to the formation of 741 and 1378 stable chemicals, respectively. Good correlations were found among water quality indices and spectral/molecular indices. Our study reveals the molecular composition and transformation of WTIW DOM during treatments and encourages the optimization of the employed processes in WWTS.

Cerium oxide: synthesis, brief characterization, and optimization of the photocatalytic activity against phenazopyridine in an aqueous solution

Water pollution by antibiotics is a global crisis, and its risk is critically more severe due to the explosive use of these drug compounds. A critical effective removal method to diminish this risk is heterogeneous photocatalysis and optimizing the conditions to reach higher mineralization efficiency. CeO₂ anoparticles (NPs) were synthesized and characterized by X-ray diffraction (XRD), UV-Vis diffuse reflection spectroscopy (DRS), and Fourier transform infrared spectroscopy (FTIR) techniques. A cubic structural crystallite phase was detected that had crystallite sizes of 17.9 and 16.7 nm estimated by the Scherrer and Williamson-Hall models. A typical FTIR absorption band for the Ce-O stretching absorption has appeared at 554 cm^-1. Based on DRS data and the Kubelka-Munk and Tauc models, Eg values of 2.80, 3.06, 3.12, and 3.13 eV were obtained for n-values of 1/2, 2, 3/2, and 3, respectively. pHpzc of CeO₂ NPs was about 5.7. The direct photolysis and surface adsorption processes have no critical role in phenazopyridine (PP) removal by appearing with 2.7 and 6.7% removal efficiencies, respectively. Due to the highest photocatalytic activity of CeO₂ NPs toward PP, the effects of the critical operating variable on the activity were evaluated, and the optimal conditions were as catalyst dose, 0.7 g/L; pH, 6; irradiation time, 90 min; and C_PP, 20 ppm. The Hinshelwood kinetics equation plot was y =  - 6.6442 - 0.4677x (r² = 0.9296), in which its slope as the rate constant of the photodegradation process was 0.4677 min^-1 (corresponding to a t_1/2 value of 1.48 min).

N-doped carbon nanospheres as selective fluorescent probes for mercury detection in contaminated aqueous media: chemistry, fluorescence probing, cell line patterning, and liver tissue interaction

A precise nano-scale biosensor was developed here to detect Hg²⁺ in aqueous media. Nitrogen-doped carbon nanospheres (NCS) created from the pyrolysis of melamine-formaldehyde resin were characterized by FESEM, XRD, Raman spectra, EDS, PL, UV-vis spectra, and N₂ adsorption-desorption, and were used as a highly selective and sensitive probe for detecting Hg²⁺ in aqueous media. The sensitivity of NCS to Hg²⁺ was evaluated by photoluminescence intensity fluctuations under fluorescence emission in the vicinity of 390 nm with a λ_exc of 350 nm. The fluorescence intensity of the NCS probe weakened in the presence of Hg²⁺ owing to the effective fluorescence quenching by that, which is not corresponding to the special covalent liking between the ligand and the metal. The effects of the fluorescence nanoprobe concentration, pH, and sensing time were monitored to acquire the best conditions for determining Hg²⁺. Surprisingly, NCS revealed excellent selectivity and sensitivity towards Hg²⁺ in the samples containing Co²⁺, Na⁺, K⁺, Fe²⁺, Mn²⁺, Al³⁺, Pb²⁺, Ni²⁺, Ca²⁺, Cu²⁺, Mg²⁺, Cd²⁺, Cr³⁺, Li⁺, Cs⁺, and Ba²⁺. The fluorescence response was linearly proportional to Hg²⁺ concentration in 0.013-0.046 µM with a limit of detection of 9.58 nM. The in vitro and in vivo toxicological analyses confirmed the completely safe and biocompatible features of NCS, which provides promise for use for water, fruit, vegetable, and/or other forms of natural-connected materials exposed to Hg²⁺, with no significant toxicity noticed toward different cells/organs/tissues.

Electrically conductive carbon-based (bio)-nanomaterials for cardiac tissue engineering

A proper self-regenerating capability is lacking in human cardiac tissue which along with the alarming rate of deaths associated with cardiovascular disorders makes tissue engineering critical. Novel approaches are now being investigated in order to speedily overcome the challenges in this path. Tissue engineering has been revolutionized by the advent of nanomaterials, and later by the application of carbon-based nanomaterials because of their exceptional variable functionality, conductivity, and mechanical properties. Electrically conductive biomaterials used as cell bearers provide the tissue with an appropriate microenvironment for the specific seeded cells as substrates for the sake of protecting cells in biological media against attacking mechanisms. Nevertheless, their advantages and shortcoming in view of cellular behavior, toxicity, and targeted delivery depend on the tissue in which they are implanted or being used as a scaffold. This review seeks to address, summarize, classify, conceptualize, and discuss the use of carbon-based nanoparticles in cardiac tissue engineering emphasizing their conductivity. We considered electrical conductivity as a key affecting the regeneration of cells. Correspondingly, we reviewed conductive polymers used in tissue engineering and specifically in cardiac repair as key biomaterials with high efficiency. We comprehensively classified and discussed the advantages of using conductive biomaterials in cardiac tissue engineering. An overall review of the open literature on electroactive substrates including carbon-based biomaterials over the last decade was provided, tabulated, and thoroughly discussed. The most commonly used conductive substrates comprising graphene, graphene oxide, carbon nanotubes, and carbon nanofibers in cardiac repair were studied.

Facile one-step synthesis of PhC2Cu nanowires with enhanced photocatalytic performance

In recent years, the research of phenylethynylcopper (PhC₂Cu) in photocatalysis has attracted immense attention. However, its synthesis requires two steps extending over 9 days. In this paper, the successful preparation of PhC₂Cu nanowires is reported using a highly rapid and facile one-step method directly using copper acetate and phenylacetylene as raw materials and ascorbic acid as reducing agent. The kinetic studies indicated that the synthetic reaction follows a pseudo-second-order equation through electrical conductivity. Comparative studies of the crystal structures, morphologies, and optical properties of PhC₂Cu prepared by the traditional two-step and the current one-step methods were conducted using XRD, SEM, UV-Vis Drs, FT-IR, Raman spectra, and photocurrent. Meanwhile, the PhC₂Cu nanowires exhibited excellent photocatalytic activity to degrade methyl violet (MV) and glyphosate. This facile and rapid method dramatically improves the preparation efficiency of PhC₂Cu, and the obtained PhC₂Cu also shows higher photocatalytic activity. This remarkable progress enables the possibility of large-scale and efficient preparation of PhC₂Cu with high photocatalytic activity, indicating their excellent application prospect in photocatalysis.

Mission impossible for cellular internalization: When porphyrin alliance with UiO-66-NH2 MOF gives the cell lines a ride

Is it possible to accelerate cell internalization by hybridization of nanomaterials? Herein we support the realization of using metal-organic frameworks (MOFs) with the assistance of rigid porphyrin structure (H₂TMP) aimed at drug loading, drug release, relative cell viability, and targeted in vitro drug delivery. There are several MOFs, i.e., UiO-66-NH2 (125 ± 12.5 nm), UiO-66-NH2 @H2TMP (160 ± 14 nm), UiO-66-NH₂ @H₂TMP@DOX, and UiO-66-NH₂ @H₂TMP@DOX@RO were synthesized and characterized applying HEK-293, HT-29, MCF-7, and MCF-10A cell lines. MTT investigations proved a significantly higher relative cell viability for H₂TMP-aided leaf-extract-coated nanocarriers (above 62 % relative cell viability). Furthermore, the rigid H₂TMP structure improved drug loading capacity by 24 % through an enhanced hydrogen bond, van der Waals, and π-π interactions. The in vitro targeted drug delivery experiments were conducted on HT-29 and MCF-7 cell lines. First, nanocarriers were treated with HT-29 cells, where UiO-66-NH₂ @H₂TMP@DOX@RO appeared as the best nanocarrier. Then, the selected nanocarrier was extracted from the HT-29 cell line and treated with the MCF-7 cell line. For the first time, the DOX remained inside the UiO-66-NH₂ @H₂TMP@DOX@RO after successful delivery to the HT-29 cell lines was observed on the MCF-7 cell line, and the second targeted drug delivery was performed. The results of this survey can enlighten the future ahead of cell internalization in MOF-based hybrid nanostructures.

Bioactive hybrid metal-organic framework (MOF)-based nanosensors for optical detection of recombinant SARS-CoV-2 spike antigen

Fast, efficient, and accurate detection of SARS-CoV-2 spike antigen is pivotal to control the spread and reduce the mortality of COVID-19. Nevertheless, the sensitivity of available nanobiosensors to detect recombinant SARS-CoV-2 spike antigen seems insufficient. As a proof-of-concept, MOF-5/CoNi₂S₄ is developed as a low-cost, safe, and bioactive hybrid nanostructure via the one-pot high-gravity protocol. Then, the porphyrin, H₂TMP, was attached to the surface of the synthesized nanomaterial to increase the porosity for efficient detection of recombinant SARS-CoV-2 spike antigen. AFM results approved roughness in different ranges, including 0.54 to 0.74 μm and 0.78 to ≈0.80 μm, showing good physical interactions with the recombinant SARS-CoV-2 spike antigen. MTT assay was performed and compared to the conventional synthesis methods, including hydrothermal, solvothermal, and microwave-assisted methods. The synthesized nanodevices demonstrated above 88% relative cell viability after 24 h and even 48 h of treatment. Besides, the ability of the synthesized nanomaterials to detect the recombinant SARS-CoV-2 spike antigen was investigated, with a detection limit of 5 nM. The in-situ synthesized nanoplatforms exhibited low cytotoxicity, high biocompatibility, and appropriate tunability. The fabricated nanosystems seem promising for future surveys as potential platforms to be integrated into biosensors.

Multifunctional green synthesized Cu-Al layered double hydroxide (LDH) nanoparticles: anti-cancer and antibacterial activities

Doxorubicin (DOX) is a potent anti-cancer agent and there have been attempts in developing nanostructures for its delivery to tumor cells. The nanoparticles promote cytotoxicity of DOX against tumor cells and in turn, they reduce adverse impacts on normal cells. The safety profile of nanostructures is an important topic and recently, the green synthesis of nanoparticles has obtained much attention for the preparation of biocompatible carriers. In the present study, we prepared layered double hydroxide (LDH) nanostructures for doxorubicin (DOX) delivery. The Cu–Al LDH nanoparticles were synthesized by combining Cu(NO₃)₂·3H₂O and Al(NO₃)₃·9H₂O, and then, autoclave at 110. The green modification of LDH nanoparticles with Plantago ovata (PO) was performed and finally, DOX was loaded onto nanostructures. The FTIR, XRD, and FESEM were employed for the characterization of LDH nanoparticles, confirming their proper synthesis. The drug release study revealed the pH-sensitive release of DOX (highest release at pH 5.5) and prolonged DOX release due to PO modification. Furthermore, MTT assay revealed improved biocompatibility of Cu–Al LDH nanostructures upon PO modification and showed controlled and low cytotoxicity towards a wide range of cell lines. The CLSM demonstrated cellular uptake of nanoparticles, both in the HEK-293 and MCF-7 cell lines; however, the results were showed promising cellular internalizations to the HEK-293 rather than MCF-7 cells. The in vivo experiment highlighted the normal histopathological structure of kidneys and no side effects of nanoparticles, further confirming their safety profile and potential as promising nano-scale delivery systems. Finally, antibacterial test revealed toxicity of PO-modified Cu–Al LDH nanoparticles against Gram-positive and -negative bacteria.

Preparation and Photocatalytic Performance of TiO2 Nanowire-Based Self-Supported Hybrid Membranes

Nowadays, the use of hybrid structures and multi-component materials is gaining ground in the fields of environmental protection, water treatment and removal of organic pollutants. This study describes promising, cheap and photoactive self-supported hybrid membranes as a possible solution for wastewater treatment applications. In the course of this research work, the photocatalytic performance of titania nanowire (TiO₂ NW)-based hybrid membranes in the adsorption and degradation of methylene blue (MB) under UV irradiation was investigated. Characterization techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray powder diffractometry (XRD) were used to study the morphology and surface of the as-prepared hybrid membranes. We tested the photocatalytic efficiency of the as-prepared membranes in decomposing methylene blue (MB) under UV light irradiation. The hybrid membranes achieved the removal of MB with a degradation efficiency of 90% in 60 min. The high efficiency can be attributed to the presence of binary components in the membrane that enhanced both the adsorption capability and the photocatalytic ability of the membranes. The results obtained suggest that multicomponent hybrid membranes could be promising candidates for future photocatalysis-based water treatment technologies that also take into account the principles of circular economy.

Multifunctional Tetracycline-Loaded Silica-Coated Core-Shell Magnetic Nanoparticles: Antibacterial, Antibiofilm, and Cytotoxic Activities

In the current study, the physicochemical and biological properties of tetracycline-loaded core-shell nanoparticles (Tet/Ni_0.5Co_0.5Fe₂O₄/SiO₂ and Tet/CoFe₂O₄/SiO₂) were investigated. The antibacterial activity of nanoparticles alone and in combination with tetracycline was investigated against a number of Gram-positive and Gram-negative bacteria for determining minimum inhibitory concentration (MIC) values. The MIC of Tet/Ni_0.5Co_0.5Fe₂O₄/SiO₂ nanoparticles turned out to be significantly higher than that of Tet/CoFe₂O₄/SiO₂ nanoparticles. Furthermore, Tet/Ni_0.5Co_0.5Fe₂O₄/SiO₂ nanoparticles exhibited potent antibiofilm activity against pathogenic bacteria compared to Tet/CoFe₂O₄/SiO₂ nanoparticles. The drug delivery potential of both carriers was assessed in vitro up to 124 h at different pH levels and it was found that the drug release rate was increased in acidic conditions. The cytotoxicity of nanoparticles was evaluated against a skin cancer cell line (melanoma A375) and a normal cell line (HFF). Our findings showed that Tet/Ni_0.5Co_0.5Fe₂O₄/SiO₂ had greater cytotoxicity than CoFe₂O₄/SiO₂ against the A375 cell line, whereas both synthesized nanoparticles had no significant cytotoxic effects on the normal cell line. Nonetheless, the biocompatibility of nanoparticles was assessed in vivo and the interaction of nanoparticles with the kidney was scrutinized up to 14 days. The overall results of the present study implied that the synthesized multifunctional magnetic nanoparticles with drug delivery potential, anticancer activity, and antibacterial activity are promising for biomedical applications.

Folic Acid-Adorned Curcumin-Loaded Iron Oxide Nanoparticles for Cervical Cancer

Cancer is a deadly disease that has long plagued humans and has become more prevalent in recent years. The common treatment modalities for this disease have always faced many problems and complications, and this has led to the discovery of strategies for cancer diagnosis and treatment. The use of magnetic nanoparticles in the past two decades has had a significant impact on this. One of the objectives of the present study is to introduce the special properties of these nanoparticles and how they are structured to load and transport drugs to tumors. In this study, iron oxide (Fe₃O₄) nanoparticles with 6 nm sizes were coated with hyperbranched polyglycerol (HPG) and folic acid (FA). The functionalized nanoparticles (10-20 nm) were less likely to aggregate compared to non-functionalized nanoparticles. HPG@Fe₃O₄ and FA@HPG@Fe₃O₄ nanoparticles were compared in drug loading procedures with curcumin. HPG@Fe₃O₄ and FA@HPG@Fe₃O₄ nanoparticles' maximal drug-loading capacities were determined to be 82 and 88%, respectively. HeLa cells and mouse L929 fibroblasts treated with nanoparticles took up more FA@HPG@Fe₃O₄ nanoparticles than HPG@Fe₃O₄ nanoparticles. The FA@HPG@Fe₃O₄ nanoparticles produced in the current investigation have potential as anticancer drug delivery systems. For the purpose of diagnosis, incubation of HeLa cells with nanoparticles decreased MRI signal enhancement's percentage and the largest alteration was observed after incubation with FA@HPG@Fe₃O₄ nanoparticles.

Fabrication of High Surface Area Microporous ZnO from ZnO/Carbon Sacrificial Composite Monolith Template

Fabrication of porous materials from the standard sacrificial template method allows metal oxide nanostructures to be produced and have several applications in energy, filtration and constructing sensing devices. However, the low surface area of these nanostructures is a significant drawback for most applications. Here, we report the synthesis of ZnO/carbon composite monoliths in which carbon is used as a sacrificial template to produce zinc oxide (ZnO) porous nanostructures with a high specific surface area. The synthesized porous oxides of ZnO with a specific surface area of 78 m2/g are at least one order of magnitude higher than that of the ZnO nanotubes reported in the literature. The crucial point to achieving this remarkable result was the usage of a novel ZnO/carbon template where the carbon template was removed by simple heating in the air. As a high surface area porous nanostructured ZnO, these synthesized materials can be useful in various applications including catalysis, photocatalysis, separation, sensing, solar energy harvest and Zn-ion battery and as supercapacitors for energy storage.

Metal-Organic Frameworks (MOFs) for Cancer Therapy

MOFs exhibit inherent extraordinary features for diverse applications ranging from catalysis, storage, and optics to chemosensory and biomedical science and technology. Several procedures including solvothermal, hydrothermal, mechanochemical, electrochemical, and ultrasound techniques have been used to synthesize MOFs with tailored features. A continued attempt has also been directed towards functionalizing MOFs via "post-synthetic modification" mainly by changing linkers (by altering the type, length, functionality, and charge of the linkers) or node components within the MOF framework. Additionally, efforts are aimed towards manipulating the size and morphology of crystallite domains in the MOFs, which are aimed at enlarging their applications window. Today's knowledge of artificial intelligence and machine learning has opened new pathways to elaborate multiple nanoporous complex MOFs and nano-MOFs (NMOFs) for advanced theranostic, clinical, imaging, and diagnostic purposes. Successful accumulation of a photosensitizer in cancerous cells was a significant step in cancer therapy. The application of MOFs as advanced materials and systems for cancer therapy is the main scope beyond this perspective. Some challenging aspects and promising features in MOF-based cancer diagnosis and cancer therapy have also been discussed.