Application of perovskite oxides and their composites for degrading organic pollutants from wastewater using advanced oxidation processes: Review of the recent progress

Urchin-like Co3O4 microspheres-boosted catalytic oxidation: Environmentally-friendly CO2 vapor generation for total organic carbon detection by microplasma optical emission spectrometry

Total organic carbon (TOC) is a crucial indicator of organic pollutants, widely used in environmental water quality monitoring and risk assessment. Conventional TOC detection methods often require high temperatures, complex equipment, and inefficient oxidation processes, limiting their field application due to time consumption, intricate operations, and limited sensitivity. Therefore, we developed a novel approach for TOC measurement using catalytic oxidation vapor generation coupled with miniaturized point discharge optical emission spectrometry (μPD-OES). This method employs urchin-like Co3O4 microspheres to convert organic pollutants to carbon dioxide during persulfate catalytic oxidation, followed by collection and quantification via carbon atomic emission line (λ = 193.0 nm). Standard or sample solutions were acidified with phosphoric acid and purged with Ar before quantification. Under optimal conditions, the proposed method achieved a detection limit of 0.01 mg L-1, offering precision (RSD, n = 11) better than 3.7 %. The feasibility of the system was tested using a certified reference material (GBW(E)082053) and environmental water samples, achieving satisfactory recoveries (98-102 %). This method provides high oxidation efficiency, sensitivity, and accuracy, while also reducing the demand for expensive and bulky instruments and minimizing energy consumption, making it suitable for rapid, sensitive field analysis of TOC.

Improved Photocatalytic Activity of Dion-Jacobson-Type Tantalate Perovskites Modified with FeCl2

A rapid and feasible approach was used to develop visible-light-driven-type Dion-Jacobson perovskites by the modification of the RbLaTa2O7 host (RbLTO) with FeCl2 through the molten salt route. X-ray diffraction (XRD) characterization showed that FeCl2-modified layered perovskite (e.g., Fe@RbLTO) preserved its lamellar structure. SEM micrographs confirmed the layered morphology of both RbLTO and Fe@RbLTO perovskite materials. The UV-Vis spectra illustrated a significant red shift of the absorption edge after Fe2+ modification, with the band gap energy reducing from 3.88 to 1.82 eV. H2-TPR measurements emphasized the anchorage of Fe2+ species located on the surface of the layered perovskite as well as in the interlayer space. The synthesized materials were valorized as photocatalysts for the degradation of phenol under both Xe lamp and simulated solar irradiation (SSL) conditions. The photocatalytic reaction follows first-order kinetics. By-product formations during phenol (Ph) degradation were identified and quantified using high-performance liquid chromatography (HPLC). Hydroquinone, 1,2-dihydroxi-benzene, benzoquinone, and pyrogallol were identified as the main Ph degradation intermediates. Pristine RbLaTa2O7 exhibited a phenol conversion value of about 17% using an Xe lamp, while a ≈ 11% conversion was achieved under SSL. A substantial increase in Ph conversion and selectivity was perceived after Fe2+ modification. Fe@RbLTO demonstrated superior photocatalytic performances (43% conversion of phenol under an Xe lamp, and 91% selectivity to aromatic intermediate compounds) at optimized reaction conditions. The stability of the Fe@RbLTO photocatalyst when exposed to an Xe lamp was also assessed. These results suggest that the existence of iron species on the layered perovskite's surface is responsible for the improved redox properties of Fe@RbLTO, resulting in a valuable material for environmental applications.

Visible-light-driven photocatalytic degradation of ibuprofen by Cu-doped tubular C3N4: Mechanisms, degradation pathway and DFT calculation

The copper-modified tubular carbon nitride (CTCN) with higher specific surface area and pore volume was prepared by a simple in-situ hydrolysis and self-assembly. Increased ∼4.7-fold and ∼2.3-fold degradation rate for a representative refractory water pollutant (Ibuprofen, IBP) were achieved with low-energy light source (LED, 420 ± 10 nm), as compared to graphitic carbon nitride (GCN) and tubular carbon nitride (TCN), respectively. The high efficiency of IBP removal was supported by narrow band gap (2.15 eV), high photocurrent intensity (1.10 μA/cm2) and the high surface -OH group (14.75 μg/cm3) of CTCN. According to analysis of the various reactive species in the degradation, the superoxide radical (•O2-) played a dominant role, followed by •OH and h+, responsible for IBP degradation. Furthermore, Fukui functions were employed to predict the active sites of IBP, and combined with the HPLC-MS/MS results, possible mechanisms and pathways for photocatalytic degradation were indicated. This study will lay an important scientific foundation and a possible new approach for the treatment of emerging aromatic organic pollutants in visible-light-driven heterogeneous catalytic oxidation environment.

Thermally-activated gelatin-chitosan-MOF hybrid aerogels for efficient removal of ibuprofen and naproxen

Nonsteroidal anti-inflammatory drugs (NSAIDs) are one of the most frequently used drugs and have been frequently detected in aquatic environments. This paper demonstrates a thermally-activated gelatin-chitosan and amine-functionalized metal-organic framework (UiO-66-NH2) aerogel (CGC-MOF), which was successfully synthesized for the efficient removal of ibuprofen (IBP) and naproxen (NPX). Various characterization tools were used to systematically analyze the microstructure and physicochemical properties of the synthesized aerogel. In addition, the effect of key reaction parameters as well as batch and continuous-flow fixed-bed column experiments were carried out to elucidate the adsorption process. Several functional groups in the biopolymer network, combined with excellent MOF properties, synergistically couple to form an adsorbent with great performance. The mesoporous aerogel activated at 200 °C (CGC-MOF200) exhibited a high specific surface area (819.6 m2/g) that is valuable in providing abundant adsorption active sites that facilitate the efficient adsorption of IBP and NPX. CGC-MOF200 exhibited an excellent removal of IBP and NPX, accounting to 99.28 % and 96.39 %, respectively. The adsorption process followed the pseudo-second-order kinetics and the Freundlich isotherm models, suggesting heterogeneous and chemisorption adsorption processes. Overall, this work provides new and valuable insights into the development of a promising biopolymer-MOF composite aerogel for environmental remediation.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Recent Advancements in Electrochemical Hydrogen Production via Hybrid Water Splitting

As one of the most promising approaches to producing high-purity hydrogen (H2 ), electrochemical water splitting powered by the renewable energy sources such as solar, wind, and hydroelectric power has attracted considerable interest over the past decade. However, the water electrolysis process is seriously hampered by the sluggish electrode reaction kinetics, especially the four-electron oxygen evolution reaction at the anode side, which induces a high reaction overpotential. Currently, the emerging hybrid electrochemical water splitting strategy is proposed by integrating thermodynamically favorable electro-oxidation reactions with hydrogen evolution reaction at the cathode, providing a new opportunity for energy-efficient H2 production. To achieve highly efficient and cost-effective hybrid water splitting toward large-scale practical H2 production, much work has been continuously done to exploit the alternative anodic oxidation reactions and cutting-edge electrocatalysts. This review will focus on recent developments on electrochemical H2 production coupled with alternative oxidation reactions, including the choice of anodic substrates, the investigation on electrocatalytic materials, and the deep understanding of the underlying reaction mechanisms. Finally, some insights into the scientific challenges now standing in the way of future advancement of the hybrid water electrolysis technique are shared, in the hope of inspiring further innovative efforts in this rapidly growing field.

Enhanced degradation of ibuprofen in an integrated constructed wetland-microbial fuel cell: treatment efficiency, electrochemical characterization, and microbial community dynamics

Over the past few decades, there has been a growing concern regarding the fate and transport of pharmaceuticals, particularly antibiotics, as emerging contaminants in the environment. It has been proposed that the presence of antibiotics at concentrations typically found in wastewater can impact the dynamics of bacterial populations and facilitate the spread of antibiotic resistance. The efficiency of currently-used wastewater treatment technologies in eliminating pharmaceuticals is often insufficient, resulting in the release of low concentrations of these compounds into the environment. In this study, we addressed these challenges by evaluating how different influent ibuprofen (IBU) concentrations influenced the efficiency of a laboratory-scale, integrated constructed wetland-microbial fuel cell (CW-MFC) system seeded with Eichhornia crassipes, in terms of organic matter removal, electricity generation, and change of bacterial community structure compared to unplanted, sediment MFC (S-MFC) and abiotic S-MFC (AS-MFC). We observed that the addition of IBU (5 mg L-1) resulted in a notable decrease in chemical oxygen demand (COD) and electricity generation, suggesting that high influent IBU concentrations caused partial inhibition for the electroactive microbial community due to its complexity and aromaticity. However, CW-MFC could recover from IBU inhibition after an acclimation period compared to unplanted S-MFC, even though the influent IBU level was increased up to 20 mg L-1, suggesting that plants in CW-MFCs have a beneficial role in relieving the inhibition of anode respiration due to the presence of high levels of IBU; thus, promoting the metabolic activity of the electroactive microbial community. Similarly, IBU removal efficiency for CW-MFC (i.e., 49-62%) was much higher compared to SMFC (i.e., 29-42%), and AS-MFC (i.e., 20-22%) during all experimental phases. In addition, our high throughput sequencing revealed that the high performance of CW-MFCs compared to S-MFC was associated with increasing the relative abundances of several microbial groups that are closely affiliated with anode respiration and organic matter fermentation. In summary, our results show that the CW-MFC system demonstrates suitability for high removal efficiency of IBU and effective electricity generation.

Strategies for enhancing performance of perovskite bismuth ferrite photocatalysts (BiFeO3): A comprehensive review

Organic pollutants pose a significant threat to water safety, and their degradation is of paramount importance. Photocatalytic technology has emerged as a promising approach for environmental remediation, and Bismuth ferrite (BiFeO3) has been shown to exhibit remarkable potential for photocatalytic degradation of water pollutants, with its excellent crystal structure properties and visible light photocatalytic activity. This review presents an overview of the crystal properties and photocatalytic mechanism of perovskite bismuth ferrite (BiFeO3), as well as a summary of various strategies for enhancing its efficiency in photocatalytic degradation of organic pollutants. These strategies include pure phase preparation, microscopic modulation, composite modification of BiFeO3, and the integration of Fenton-like reactions and external field-assisted methods to improve its photocatalytic performance. The review emphasizes the impact of each strategy on photocatalytic enhancement. By providing comprehensive strategies for improving the efficiency of BiFeO3 photocatalysis, this review inspires new insights for efficient degradation of organic pollutants using BiFeO3 photocatalysis and contributes to the development of photocatalysis in environmental remediation.

Photocatalytic Degradation of Acetaminophen in Aqueous Environments: A Mini Review

Over the past few decades, acetaminophen (ACT), a typical nonsteroidal anti-inflammatory drug (NSAID), has gained global usage, positioning itself as one of the most extensively consumed medications. However, the incomplete metabolism of ACT leads to a substantial discharge into the environment, classifying it as an environmental contaminant with detrimental effects on non-target organisms. Various wastewater treatment technologies have been developed for ACT removal to mitigate its potential environmental risk. Particularly, photocatalytic technology has garnered significant attention as it exhibits high efficiency in oxidizing and degrading a wide range of organic pollutants. This comprehensive review aims to systematically examine and discuss the application of photocatalytic technology for the removal of ACT from aqueous environments. Additionally, the study provides a detailed overview of the limitations associated with the photocatalytic degradation of ACT in practical applications, along with effective strategies to address these challenges.

Radical-/non-radical-mediated catalyst activation of peroxymonosulfate for efficient atrazine degradation

Efficient degradation technologies are urgent to be developed to avoid the ecological and healthy hazards brought from atrazine (ATZ). LaCoO_3-δ/peroxymonosulfate (PMS) system was proved to have strong degradation capabilities to contaminants. In this work, we intended to investigate the effect of the synthesis method on LaCoO_3-δ. However, the hydrothermal method yielded a new material (H-Co) with better catalytic performance than LaCoO_3-δ, which showed stable catalytic ability at pH 3.0-9.0 and 5 consecutive cycles. The coexistence of inorganic Cl^-, SO₄^2-, NO₃^-, H₂PO₄^-, HCO₃^- and organic humic acids exerted little influences on the H-Co/PMS system. In addition, the actual livestock and poultry breeding wastewater could be well degraded and mineralized by the H-Co/PMS system. Free radical burst experiments and EPR characterization were performed to verify the synergistic effects of free radicals and non-free radicals during ATZ degradation. Based on SEM, XRD, O₂-TPD, FTIR, XPS, and electrochemistry characterizations, the efficient catalytic ability of H-Co could be attributed to the abundant oxygen vacancies, surface hydroxyl groups, zero-valent cobalt sites and high electronic conductivity. The degradation pathways were proposed based on the detection of degradation intermediates of ATZ by UPLC-MS. Moreover, the toxic of ATZ during the oxidation was evaluated by TEXT and E. coli inhibition assay. This work comprehensively analyzed the catalytic reaction mechanism of the H-Co/PMS system and provided a feasible pathway for the treatment of the actual livestock and poultry breeding wastewater.

La2CoO4+δ perovskite-mediated peroxymonosulfate activation for the efficient degradation of bisphenol A

Sulfate radical-based technology has been considered as an efficient technology to remove pharmaceuticals and personal care products (PPCPs) with heterogeneous metal-mediated catalysts for the activation of peroxymonosulfate (PMS). In this study, La₂CoO_4+δ perovskite with Ruddlesden-Popper type structure was synthesised by the sol-gel method, which was employed in PMS activation. Different characteriazation technologies were applied for the characterization of La₂CoO_4+δ , such as SEM-EDX, XRD, and XPS technologies. A common organic compound, bisphenol A (BPA), is used as a target contaminant, and the effect impactors were fully investigated and explained. The results showed that when the dosage of La₂CoO_4+δ was 0.5 g L^-1 and the concentration of PMS was 1.0 mM in neutral pH solution, about 91.1% degradation efficiency was achieved within 25 minutes. Quenching experiments were introduced in the system to verify the catalytic mechanism of PMS for the BPA degradation, proving the existence of superoxide, hydroxyl radicals and sulfate radicals, which are responsible for the catalytic degradation of BPA. Moreover, the reusability and stability of the catalyst were also conducted which showed good stability during the reaction. This work would improve the applications of A₂BO₄-type perovskites for activating PMS to degrade BPA.

Vasconcellos M, Pedicini R, Ribeiro J. Evaluation of Photoelectrocatalysis with Electrode Based on Ti/RuO2-TiO2 Modified with Tin and Tantalum Oxides for the Degradation of Indigo Blue Dye

Indigo Blue (IB) is a dye widely used by the textile sector for dyeing cellulose cotton fibers and jeans, being considered a recalcitrant substance, and therefore resistant to traditional treatments. Several methodologies are reported in the literature for the removal or degradation of dyes from the aqueous medium, among which photoelectrocatalysis stands out, which presents promising results in the degradation of dyes when a dimensionally stable anode (DSA) is used as a photoanode. In the present work, we sought to investigate the efficiency of a Ti/RuO2-TiO2 DSA modified with tin and tantalum for the degradation of Indigo Blue dye by photoelectrocatalysis. For this, electrodes were prepared by the thermal decomposition method and then a physical-chemical and electrochemical analysis of the material was carried out. The composition Ti/RuO2-TiO2-SnO2Ta2O5 (30:40:10:20) was compared to Ti/RuO2-TiO2 (30:70) in the photocatalysis, electrocatalysis, and photoelectrocatalysis tests. The photocatalysis was able to degrade only 63% of the IB at a concentration of 100 mg L-1 in 3 h, whereas the electrocatalysis and photoelectrocatalysis were able to degrade 100% of the IB at the same initial concentration in 65 and 60 min, respectively.

Cold plasma-assisted regeneration of biochar for dye adsorption

Environmental remedies, including adsorption-based water purification, are now being asked to meet the requirement for a low-carbon circular economy requiring low energy and low material consumption. In this regard, we tested the possibility of regenerating adsorbents via cold plasma (CP) treatment for less use of adsorbents and no washing solution. In the adsorption of methylene blue (MB) using carbonized rice husk (CRH) and five successive regeneration cycles by CP treatment, the removal efficiencies were maintained at a moderate level (∼70% of the initial performance), unlike five consecutive adsorption without CP treatment (∼9-13% of the initial performance). The regeneration of CRH by CP treatment was also double-checked by the FESEM, EDS, BET, FTIR, XPS, and surface zeta potential measurements. The successfully recovered adsorption capability is related to the remediation of adsorption sites. It is also worth noting that the required power consumption for recycling by CP treatment was about 6.4 times lower than carbonizing new rice husks. This work provides insights into recovering adsorbents using CP without rigorous, costly, and energy-intensive processes.

ZnO Particles Modified MgAl Coatings with Improved Photocatalytic Activity Formed by Plasma Electrolytic Oxidation of AZ31 Magnesium Alloy in Aluminate Electrolyte

MgAl and MgAl/ZnO coatings were prepared by plasma electrolytic oxidation (PEO) of AZ31 magnesium alloy in aluminate electrolyte (5 g/L NaAlO2) without and with addition of ZnO particles in various concentrations. The MgAl coating was partially crystallized and contained MgO and MgAl2O4 phases. The addition of ZnO particles to aluminate electrolyte had no significant effect on the surface morphology of formed coatings, while the Zn content increased with ZnO particle concentrations. X-ray diffraction confirmed the incorporation of ZnO particles in the coatings. The photodegradation of methyl orange (10 cm3 of 8 mg/L) was used to measure the photocatalytic activity (PA) of MgAl and MgAl/ZnO coatings. The PA of MgAl coating after 8 h of irradiation was around 58%, while the PA of MgAl/ZnO coatings formed in aluminate electrolyte with the addition of ZnO particles in concentrations of 4 g/L, 8 g/L, and 12 g/L were around 69%, 86%, and 97%, respectively.

Recent Progress in Photocatalytic Removal of Environmental Pollution Hazards in Water Using Nanostructured Materials

Water pollution has become a critical issue because of the Industrial Revolution, growing populations, extended droughts, and climate change. Therefore, advanced technologies for wastewater remediation are urgently needed. Water contaminants are generally classified as microorganisms and inorganic/organic pollutants. Inorganic pollutants are toxic and some of them are carcinogenic materials, such as cadmium, arsenic, chromium, cadmium, lead, and mercury. Organic pollutants are contained in various materials, including organic dyes, pesticides, personal care products, detergents, and industrial organic wastes. Nanostructured materials could be potential candidates for photocatalytic reduction and for photodegradation of organic pollutants in wastewater since they have unique physical, chemical, and optical properties. Enhanced photocatalytic performance of nanostructured semiconductors can be achieved using numerous techniques; nanostructured semiconductors can be doped with different species, transition metals, noble metals or nonmetals, or a luminescence agent. Furthermore, another technique to enhance the photocatalytic performance of nanostructured semiconductors is doping with materials that have a narrow band gap. Nanostructure modification, surface engineering, and heterojunction/homojunction production all take significant time and effort. In this review, I report on the synthesis and characterization of nanostructured materials, and we discuss the photocatalytic performance of these nanostructured materials in reducing environmental pollutants.