Transformation of microplastics by oxidative water and wastewater treatment processes: A critical review

Catalytic membrane with dual-layer structure for ultrafast degradation of emerging contaminants in surface water treatment

The catalytic membrane-based oxidation-filtration process integrates physical separation and chemical oxidation, offering a highly efficient water purification strategy. However, the oxidation-filtration process is limited in practical applications due to the short residence time of milliseconds within the catalytic layer and the interference of coexisting organic pollutants in real water. Herein, a dual-layer membrane containing a top selective layer and a bottom catalytic layer was fabricated using an in situ co-casting method with a double-blade knife. Experimental results demonstrated that the selective layer rejected macromolecular organic pollutants, thereby alleviating their interference with bisphenol A (BPA) degradation. Concurrently, the catalytic layer activated peracetic acid oxidant and achieved a high BPA degradation exceeding 90 % in milliseconds with reactive oxygen species (especially •OH). The finite-element analysis confirmed a high-concentration reaction field occupying the pore cavity of the catalytic layer, enhancing collision probability between reactive oxygen species and BPA, i.e., the nano-confinement effect. Additionally, the dual-layer membrane achieved a long-term stable performance for emerging contaminant degradation in surface water treatment. This work underscores a novel catalytic membrane structure design for high-performance oxidation-filtration processes and elucidates its mechanisms underlying ultrafast degradation.

Quantifying the effects of chlorine disinfection on microplastics by time-resolved inductively coupled plasma-mass spectrometry

Using current water treatment systems, significant amounts of microplastics (MPs) are passing through and being released into the aquatic environment. However, we do not clearly know what effects disinfection processes have had on these particles. In this study, we applied inductively coupled plasma-mass spectrometry (ICP-MS) operating in time-resolved analysis (TRA) mode for quantifying changes in the chlorine (Cl) content of MPs under a variety of water treatment scenarios. Our results illustrated that time-resolved ICP-MS offers a potential method for sensitive and direct analysis of Cl content, including Cl mass and chlorine association (%Cl/C), of discrete particles in the MP suspension by the fast sequential measurements of signals from 35Cl1H2 and 12C1H. Our research, across various water treatment scenarios, also showed that polystyrene (PS) MPs exhibited greater reactivity to Cl disinfectant after being pre-disinfected with UV light and in mildly acidic to neutral pH environments. It is noteworthy that about half of the particles in MP suspension exposed to 10 mg Cl2/L, a typical Cl dose applied in water treatment, were chlorinated, and had a Cl content comparable to that of particles subjected to extreme conditions. Of even greater concern is the fact that our cell viability tests revealed that chlorinated MPs induced considerably higher rates of cell death in both human A549 and Caco-2 cells, and that the effects were Cl dose- and polymer type-dependent. Overall, this study demonstrates the potential of time-resolved ICP-MS as a valuable technique for quantifying the Cl content of MP particles, which is crucial to assessing the fate and transformation of MPs in our water supply and treatment systems.

Mitigated toxicity of polystyrene nanoplastics in combination exposure with copper ions by transformation into copper (I) oxide: Inhibits the oxidative potential of nanoplastics

The combined impact of trace metals and polystyrene (PS) microplastics is extremely concerning for human health because PS microplastics can serve as a vehicle for other contaminants. Herein, we investigated the combined effect of copper ions (Cu2+) on the toxicity of PS nanoplastics in vivo and in vitro. The pristine PS (PPS) and ultraviolet irradiated oxidized PS (OPS) nanoplastics with 50 nm-size were conjugated with Cu2+ (13-27 mg/g) for 4 days to get four types of samples: PPS, OPS, PPS/Cu, and OPS/Cu. The comparative toxic potentials of test samples were evaluated using a mouse pharyngeal aspiration model and relevant human cell lines (A549 and differentiated THP-1 cells). The results showed an antagonistic effect in vivo and in vitro by the presence of Cu ions: PPS > PPS/Cu; OPS > OPS/Cu. Furthermore, the OPS produced significantly increased toxic potentials compared to the corresponding PPS: OPS > PPS; OPS/Cu > PPS/Cu. The antagonistic effect of Cu2+ on the toxicity of PS was due to the transformation of Cu2+ and balanced the surface charge of the nanoplastics, which inhibited the oxidative potential of corresponding nanoplastics. These antagonistic effects may provide a better understanding of the combined effects of metals on the intrinsic toxic potential of microplastics under natural conditions.

The effect of water ozonation in the presence of microplastics on water quality and microplastics degradation

The occurrence of microplastics in water treatment plants poses a concern for the quality of treated water. When microplastics pass through water treatment plants, they can be oxidized, changing their surface characteristics and the quality of the treated water. This work aimed to investigate the impact of ozone and the association of ozone and hydrogen peroxide on five different microplastic particles that are commonly detected in water samples. The changes in the concentration of total organic carbon and the change in the pH of the water, the leaching of phthalic acid esters, as well as the changes in size and chemical changes in the structure of the tested microplastics were evaluated. The influence of ozonation time, water pH, and type of microplastics, as well as the influence of the addition of hydrogen peroxide, was analyzed. The effect of ozonation was an increase in DOC values ranging from 0.8 to 28 mg/L. The eluting substances included phthalic acid esters, plasticizers with a proven negative impact on organisms. The percentage loss of the surface area of the microplastic was in the range of 1.3 to 26.7 %. PE was more susceptible to degradation. LDIR analyzes were carried out to investigate the effect of O3 and O3/H2O2 treatments on the surface of MPs. This study demonstrated that MPs could change their physical and chemical characteristics if they are subjected to oxidation processes used in water treatment plants. The parameters of purified water change to unfavorable ones due to the leaching of additives. Although much research has been conducted on the occurrence of microplastics in treated water, awareness needs to be raised about the interactions between plastic particles and water treatment technology processes.

Effects of the plastic additive 2,4-di-tert-butylphenol on intestinal microbiota of zebrafish

Plastic additives such as the antioxidant 2,4-di-tert-butylphenol (2,4-DTBP) have been widely detected in aquatic environments, over a wide range of concentrations reaching 300 μg/L in surface water, potentially threatening the health of aquatic organisms and ecosystems. However, knowledge of the specific effects of 2,4-DTBP on aquatic vertebrates is still limited. In this study, adult zebrafish were exposed to different concentrations of 2,4-DTBP (0, 0.01, 0.1 and 1.0 mg/L) for 21 days in the laboratory. The amplicon sequencing results indicated that the diversity and composition of the zebrafish gut microbiota were significantly changed by 2,4-DTBP, with a shift in the dominant flora to more pathogenic genera. Exposure to 2,4-DTBP at 0.1 and 1.0 mg/L significantly increased the body weight and length of zebrafish, suggesting a biological stress response. Structural assembly defects were also observed in the intestinal tissues of zebrafish exposed to 2,4-DTBP, including autolysis of intestinal villi, adhesions and epithelial detachment of intestinal villi, as well as inflammation. The transcriptional expression of some genes showed that 2,4-DTBP adversely affected protein digestion and absorption, glucose metabolism and lipid metabolism. These results are consistent with the PICRUSt2 functional prediction analysis of intestinal microbiota of zebrafish exposed to 2,4-DTBP. This study improves our understanding of the effects of 2,4-DTBP on the health of aquatic vertebrates and ecosystems.

Identification and quantification of nanoplastics (20-1000 nm) in a drinking water treatment plant using AFM-IR and Pyr-GC/MS

Nanoplastics, owing to their small particle size, pose a significant threat to creatures, deserving heightened attention. Numerous studies have investigated microplastics pollution and their removal efficiency in drinking water treatment plants, none of which have involved nanoplastics due to lacking a suitable analytical method. This study introduced a feasible method of combing AFM-IR and Pyr-GC/MS to identify and quantify nanoplastics (20-1000 nm) for a preliminary understanding of their fate during drinking water treatment processes. Resolving of chemical functional groups and pyrolysis products from AFM-IR and Pyr-GC/MS data demonstrated the presence of PE and PVC nanoplastics in this drinking water treatment plant. The initial influent abundances of PE and PVC nanoplastics were 0.86 μg/L and 137.31 μg/L, with subsequent increase to 4.49 μg/L and 208.64 μg/L in ozonation contact tank unit. Then a gradual decreasing was observed along water process, achieving 98.4% removal of PE nanoplastics and 44.0% removal of PVC nanoplastics, respectively. Although this drinking water treatment plant has exhibited a certain level of nanoplastics removal efficiency, particular attention should be directed to the oxidation unit, which appears to be a significant source of nanoplastics. This study will lay a foundation for revealing nanoplastics pollution in the environment.

Fate and potential risks of microplastic fibers and fragments in water and wastewater treatment processes

Water and wastewater treatment plants (WWTPs) receive various types of microplastics (MPs), with fibers and fragments being dominant shapes. Here we investigated the removal behavior and transformation of MPs (polypropylene and polyethylene terephthalate fibers and fragments) in simulated water and wastewater treatment units, including activated sludge process, coagulation, sand filtration, and advanced oxidation/disinfection. Sand filtration demonstrated the highest average efficiency in removing MPs (98 %), followed by activated sludge process (61 %) and coagulation (55 %), which was associated with their physicochemical properties (shape, size, density, surface functional groups, etc). In activated sludge process and coagulation, the polymer type had a greater impact on the removal of MPs than the particle shape, while in sand filtration, the particle shape played a more important role. When subjected to the long-term operation and backwashing of sand filters, approximately 15 % of the initially filtered fragments broke through the sand media, with nearly no fibers escaping. UV-based advanced oxidation and chlorination induced the leaching of dissolved organic matters with different molecular characteristics from fragment MPs, resulting in varying levels of cytotoxicity and bacterial toxicity. Our study provides important information for predicting the fate of MPs and mitigating their impacts in WWTPs.

Seasonal variations of microplastics in surface water and sediment in an inland river drinking water source in southern China

The aim of this study was to examine microplastic (size distribution of 0.05-5 mm) occurrence and distribution in drinking water source of XJ River during both flooding and dry periods. Surface water and sediment samples were collected from the CS City section of the river in August and December 2020. During the flooding period, microplastic abundances were observed at 0.72-18.6 (7.32 ± 2.36) items L-1 in surface water and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw) in sediment. In the dry period, abundances were slightly higher at 2.88-17.7 (11.0 ± 3.08) items L-1 and 27.0-651 (249 ± 182) items kg-1 dw, respectively. Microplastics were found in higher concentrations in urban areas and downstream of wastewater treatment plants, suggesting anthropogenic sources. The diversity in shapes, colors, and types of microplastics in surface waters and sediments indicates specialized enrichment processes and persistent sources of microplastic pollution. Approximately 60 % of the microplastic particles identified fall within the 50-100 μm range. Furthermore, a significant correlation was observed between these smaller-sized particles and the overall prevalence of microplastics. Fourier-transform infrared spectroscopy and scanning electron microscopy indicated that the microplastics had been subjected to weathering in the environment, contributing to the production of oxygen-containing functional groups and surface cleavage features. The utilization of energy dispersive spectroscopy revealed the presence of microplastics associated with various heavy metals, highlighting the intricate nature of microplastic pollution. Moreover, the high abundance of microplastics may pose a potential ecological risk to the aquatic environment of the XJ River. The results of this study demonstrate concerning levels of microplastics in the XJ River, despite its status as a high-quality water source.

Insight into the chemical transformation and organic release of polyurethane microplastics during chlorination

The ubiquitous occurrence of microplastics in water and wastewater is a growing concern. In this study, the chemical transformation and organic release of virgin and UV-aged thermoplastic polyurethane (TPU) polymers during chlorination were investigated. As compared to virgin TPU polymer, the UV-aged TPU polymer exhibited high chlorine reactivity with noticeable destruction on its surface functional groups after chlorination, which could be ascribed to the UV-induced activation of hard segment of TPU backbone and increased contact area. The concentrations of leached organics increased by 1.6-fold with obviously high abundances of low-molecular-weight components. Additives, monomers, compounds relating to TPU chain extension, and their chlorination byproducts contributed to the increased organic release. Meanwhile, the formation of chloroform, haloacetic acids, trichloroacetaldehyde, and dichloroacetonitrile increased by 3.8-, 1.7-, 4.9-, and 2.4-fold, respectively. Two additives and six chlorination byproducts in leachate from chlorinated UV-aged TPU were predicted as highly toxic, e.g., butyl octyl phthalate, palmitic acid, 2,6-di-tert-butyl-1,4-benzoquinone, and chlorinated aniline. Evaluated by human hepatocarcinoma cells, the 50% lethal concentration factor of organics released from chlorinated UV-aged TPU was approximately 10% of that from its virgin counterpart, indicating a substantially increased level of cytotoxicity. This study highlights that the release of additives and chlorination byproducts from the chemical transformation of UV-aged microplastics during chlorination may be of potentially toxic concern.

A broad horizon for sustainable catalytic oxidation of microplastics

Microplastics (MPs) have attracted tremendous attention due to their widespread appearance in the environment and biota, and their adverse effects on organisms. Since plastics are substantially produced to meet human needs, primary and secondary MPs are extensively trapped in wastewater treatment plants, freshwater, drinking water, ocean, air, and soil. The serious MPs pollution calls for efficient treatment strategies Herein, we discuss three catalytic processes (photocatalysis, electrocatalysis, and biocatalysis) for the sustainable management of MPs, and the relevant catalytic mechanisms are clarified. For photocatalysis, three categories (organic, inorganic, hybrid) of photocatalysts are listed, with degradation efficiency of 23%-100%. Next, relative impact factors on photocatalysis, such as characteristics of MPs and photocatalysts, are discussed. Then, some promising electrocatalysts for the degradation/conversion of (micro)plastics and standard electrolyzer designs are briefly introduced. This electrocatalytic method has achieved over 77% of Faradaic efficiency. Next, potential organisms with abundant biocatalysts for degrading different types of MPs are reviewed. Advances in three bioremediation techniques including biositimulation, bioaugmentation, and biosurfactant are outlined. Lastly, perspectives are put forward to promote scientific development in solving environmental issues on MPs pollution in broad fields. This paper provides insights into the development of next-generation techniques for MPs pollution management in a sustainable manner.

Application of advanced oxidation processes for the removal of micro/nanoplastics from water: A review

Micro/nanoplastics (MNPs) have been increasingly found in environments, food, and organisms, arousing wide public concerns. MNPs may enter food chains through water, posing a threat to human health. Therefore, efficient and environmentally friendly technologies are needed to remove MNPs from contaminated aqueous environments. Advanced oxidation processes (AOPs) produce a vast amount of active species, such as hydroxyl radicals (·OH), known for their strong oxidation capacity. As a result, an increasing number of researchers have focused on using AOPs to decompose and remove MNPs from water. This review summarizes the progress in researches on the removal of MNPs from water by AOPs, including ultraviolet photolysis, ozone oxidation, photocatalysis, Fenton oxidation, electrocatalysis, persulfate oxidation, and plasma oxidation, etc. The removal efficiencies of these AOPs for MNPs in water and the influencing factors are comprehensively analyzed, meanwhile, the oxidation mechanisms and reaction pathways are also discussed in detail. Most AOPs can achieve the degradation of MNPs, mainly manifest as the decrease of particle size and the increase of mass loss, but the mineralization rate is low, thus requiring further optimization for improved performance. Investigating various AOPs is crucial for achieving the complete decomposition of MNPs in water. AOPs will undoubtedly play a vital role in the future for the removal of MNPs from water.

Risk assessment framework for microplastic in marine environments

Constantly raising microplastic (MP) contamination of water sources poses a direct threat to the gentle balance of the marine environment. This study focuses on a multifactor hazard evaluation of conventional (polyethylene - PE, polypropylene - PP, and polystyrene - PS) and alternative (polyethylene terephthalate with 25 % or 50 % recycled material and polylactic acid) plastics. The risk assessment framework explored included MP abundance, water acidification potential, surface oxidation, fragmentation, and bacterial growth inhibition. Based on MP monitoring campaigns worldwide, we conclude that PE-based plastics are the most abundant MPs in water samples (comprise up to 82 % the MP in those samples). A year-long weathering experiment showed that PS-based and PP-based plastics were oxidized to a higher extent, resulting in the highest water acidification with pH reduction of up to three orders of magnitude. Finally, our laboratory experiments showed that weathered PS was the most fragile plastic during mechanical degradation, while both PP- and PS-based plastic extracts showed a significant growth inhibition toward the marine microorganisms (Bacillus sp. and Pseudoaltermonas sp). Using the examined factors as weighted inputs into our framework, this holistic evaluation of hazards suggest that PP-based plastic products were the most hazardous compared to the other conventional and alternative plastic types.

Quantitative and qualitative approaches for CEC prioritization when reusing reclaimed water for irrigation needs - A critical review

The use of reclaimed water for irrigation is an option that is becoming increasingly widespread to alleviate water scarcity and to cope with drought. However, reclaimed water, if used for irrigation, may introduce Contaminants of Emerging Concern (CECs) into the agroecosystems, which may be taken up by the crops and subsequently enter the food chain. The number of CECs is steadily increasing due to their continuous introduction on the market for different uses. There is an urgent need to draw up a short list of potential high priority CECs, which are substances that could be taken up by plants and accumulated in food produce, and/or that could have negative effects on human health and the environment. This review presents and discusses the approaches developed to prioritize CECs when reclaimed water is (re-)used for irrigation. They are divided into quantitative methodologies, which estimate the risk for environmental compartments (soil and water), predators and humans through equations, and qualitative methodologies, which are instead conceptual frameworks or procedures based on the simultaneous combination of data/information/practices with the judgment of experts. Three antibiotics (erythromycin, sulfamethoxazole and ciprofloxacin), one estrogen (17-α ethinylestradiol) and one analgesic (ibuprofen) were found on at least two priority lists, although comparison among studies is still difficult. The review remarks that it is advisable to harmonize the different methodologies in order to identify the priority CECs to include in monitoring programs in reclaimed water reuse projects and to ensure a high level of protection for humans and the environment.

Toxicological impact of microplastics and nanoplastics on humans: understanding the mechanistic aspect of the interaction

Plastic is a pervasive material that has become an indispensable part of our daily lives and is used in various commercial products. However, plastic waste has significantly impacted the environment, accumulating in water and land ecosystems and harming all forms of life. When plastic degrades, it breaks down into smaller particles called microplastics (MPs), which can further breakdown into nanoplastics (NPs). Due to their small size and potential toxicity to humans, NPs are of particular concern. During the COVID-19 pandemic, the production of plastic had reached unprecedented levels, including essential medical kits, food bags, and personal protective equipment (PPE), which generate MPs and NPs when burned. MPs and NPs have been detected in various locations, such as air, food, and soil, but our understanding of their potential adverse health effects is limited. This review aims to provide a comprehensive overview of the sources, interactions, ecotoxicity, routes of exposure, toxicity mechanisms, detection methods, and future directions for the safety evaluation of MPs and NPs. This would improve our understanding of the impact of MPs and NPs on our health and environment and identify ways to address this global crisis.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.