Ultrathin C3N4 nanosheets-based oxidase-like 2D fluorescence nanozyme for dual-mode detection of organophosphorus pesticides

Highly sensitive turn-on electrochemical sensing of organophosphorus pesticides by integration of homogeneous reaction and heterogeneous catalytic signal amplification

Enzyme-inhibited electrochemical sensor is a promising strategy for detecting organophosphorus pesticides (OPs). However, the poor stability of enzymes and the high oxidation potential of thiocholine signal probe limit their potential applications. To address this issue, an indirect strategy was proposed for highly sensitive and reliable detection of chlorpyrifos by integrating homogeneous reaction and heterogeneous catalysis. In the homogeneous reaction, Hg2+ with low oxidation potential was employed as signal probe for chlorpyrifos detection since its electroactivity can be inhibited by thiocholine, which was the hydrolysate of acetylthiocholine catalyzed by acetylcholinesterase. Additionally, Co,N-doped hollow porous carbon nanocage@carbon nanotubes (Co,N-HPNC@CNT) derived from ZIF-8@ZIF-67 was utilized as high-performance electrode material to amplify the stripping voltammetry signal of Hg2+. Thanks to their synergistic effect, the sensor exhibited outstanding sensing performance, excellent stability and good anti-interference ability. This strategy paves the way for the development of high-performance OP sensors and their application in food safety.

A novel fluorescent and photothermal probe based on nanozyme-mediated cascade reaction for detecting organophosphorus pesticide residues

In this study, a nanozyme (ZIF-Co-Cys) with high oxidase-like catalytic activity was prepared, and a ratiometric fluorescent/photothermal dual-mode probe was constructed for organophosphorus pesticides (OPs) detection based on the competitive effect of ZIF-Co-Cys and the enzymatic reaction product of acid phosphatase (ACP) on o-phenylenediamine and the inhibition effect of OPs on ACP activity. Using dimethyl dichloroviny phosphate (DDVP) as the model, both the fluorescence intensity ratio and the temperature change of the probe solution exhibited an excellent correlation with OPs concentration. The detection limits were 1.64 ng/mL and 0.084 ng/mL, respectively. Additionally, the detection of DDVP residues in real samples verified the outstanding anti-interference and accuracy of the probe. This work not only provided a complementary dual-mode method for the accurate and rapid detection of OPs residues in complex samples, but also supplied a new insight into the design of a multi-mode sensing platform based on the cascade reaction of nanozyme.

A colorimetric/electrochemical microfluidic biosensor using target-triggered DNA hydrogels for organophosphorus detection

Organophosphorus compounds are widely distributed and highly toxic to the environment and living organisms. The current detection of organophosphorus compounds is based on a single-mode method, which makes it challenging to achieve good portability, accuracy, and sensitivity simultaneously. This study designed a multifunctional microfluidic chip to develop a dual-mode biosensor employing a DNA hydrogel as a carrier and aptamers as recognition probes for the colorimetric/electrochemical detection of malathion, an organophosphorus compound. The biosensor balanced portability and stability by combining a microfluidic chip and target-triggered DNA hydrogel-sensing technologies. Moreover, the biosensor based on target-triggered DNA hydrogel modified microfluidic developed in this study exhibited a dual-mode response to malathion, providing both colorimetric and electrochemical signals. The colorimetric mode enables rapid visualization and qualitative detection and, when combined with a smartphone, allows on-site quantitative analysis with a detection limit of 56 nM. The electrochemical mode offers a broad linear range (0.01-3000 μM) and high sensitivity (a limit of detection of 5 nM). The two modes could validate each other and improve the accuracy of detection. The colorimetric/electrochemical dual-mode biosensor based on target-triggered DNA hydrogel modified microfluidic chip offers a portable, simple, accurate, and sensitive strategy for detecting harmful environmental and food substances.

High-performance colorimetric sensor based on PtRu bimetallic nanozyme for xanthine analysis

The identification and quantification of xanthine are crucial for assessing the freshness and quality of food products, particularly in the seafood industry. Herein, a new approach was developed, involving the in-situ controllable growth of Pt91Ru9 nanoparticles on graphitic carbon nitride to yield Pt91Ru9@C3N4 catalytic materials. By integrating Pt91Ru9@C3N4 with the xanthine/xanthine oxidase (XOD) enzyme catalytic system, a nanozyme-enzyme tandem platform was obtained for the quantification analysis of xanthine. Under the catalytic oxidation of xanthine by XOD in the presence O2, H2O2 was generated. Upon the addition of peroxidase-like activity of Pt91Ru9@C3N4, H2O2 can be decomposed into •OH and 1O2, which can further catalyze the oxidation of TMB to its oxidation product oxTMB with an absorption peak at 652 nm. This smartphone-assisted portable colorimetric sensor for visual monitoring xanthine with a low detection limit of 8.92 nmol L-1, and successfully applied to detect xanthine in grass carp and serum samples.

Organophosphorus Hydrolase-like Nanozyme with an Activity-Quenched Aggregation-Induced Emission Effect: A Self-Reporting and Specific Assay of Nerve Agents

Given the promising prospect of aggregation-induced emission luminogens (AIEgens) in fluorescence assays, it is interesting and significant to endow AIEgens with molecular recognition capability (such as enzyme-like activity). Here, an AIE nanomaterial with intrinsic enzyme-like activity (named as "AIEzyme") is designed and synthesized via a facile coordination polymerization of Zr4+ and AIE ligands. AIEzyme possesses enhanced and stable fluorescence in different solvents because of the AIE effect of ligands in the rigid structure of a coordination polymer. On the other hand, the organophosphorus hydrolase (OPH)-mimicking activity of AIEzyme exhibits excellent affinity and specific activity. Interestingly, the OPH-like activity can quench the inherent fluorescence of AIEzyme by the hydrolysate of a typical organophosphorus nerve agent (OPNA), diethyl-4-nitrophenylphosphate. Due to the sensitive activity-induced quenching effect for AIE, the self-reporting fluorescence assay method based on AIEzyme was established, which shows ultrahigh sensitivity, high selectivity, good storage stability, and acceptable reliability for a real sample assay. Moreover, the simultaneous colorimetric method broadens the detection range and the application scenarios. The proposed assay method avoided the interference of O2 during detection because the OPH-like activity does not derive from the generation of ROS. As a bonus, AIEzyme can also be used for the degradation of OPNAs by OPH-like activity, and the process can be self-monitored by AIE quenching. This work would provide a new opportunity for expanding the application of AIEgens and artificial enzymes by endowing AIEgens with enzyme-like activity.

Construction of the fluorescence sensing platform with a bifunctional Cu@MOF nanozyme for determination of alkaline phosphatase and its inhibitor

In this work, a novel and sensitive fluorescence sensing system for alkaline phosphatase (ALP) was constructed using a bifunctional copper metal-organic framework (Cu@MOF) nanozyme, which had excellent oxidase-mimetic activity and fluorescence properties. Owing to the presence of 2-amino-1,4-benzenedicarboxylic acid (1,4-BDC-NH2) ligand, Cu@MOF displays excellent fluorescence performance at 444 nm. Additionally, Cu2+ endows the oxidase-like activity of Cu@MOF, which could trigger p-phenylenediamine (PPD) to be oxidized to a brown product (PPDox) and quench the photoluminescence of Cu@MOF through the inner filtration effect (IFE). As the preferential affinity of ATP for Cu2+, the catalytic activity of Cu@MOF was significantly reduced once ATP was added, thus PPD could not be oxidized and fluorescence was recovered. In the presence of ALP, ATP was hydrolyzed to adenosine and Pi, which allowed Cu@MOF to regain its catalytic activity and continued to catalyze the generation of PPDox. The fluorescence of Cu@MOF was therefore weakened once again. The ALP activity was directly proportional to the degree of decrease in fluorescence intensity. Thus, this novel fluorescence sensing strategy had a linear range of 0.5-60 U/L and the limit of detection was 0.14 U/L. The established sensing method could also be used to for ALP inhibitors screening, and achieved satisfactory results in determining the level of ALP activity in human serum.

Signal switching electrochemical and fluorescence dual-mode sensing platform for carbendazim determination based on "two-in-one" magneto-fluorescent Cdots

An innovative method for carbendazim (CBZ) detection was developed, consisting of an electrochemical-fluorescence dual-mode biosensor based on magneto-fluorescent composite M-CDs. M-CDs, as the fluorescent probe of this sensor, could combine the electrical signal-ferrocene to achieve the "signal switching" by specifically recognizing CBZ through aptamers, of which magnetic property was used to quickly separate from complex substrates without interference. The dual-mode sensor based on M-CDs demonstrated excellent linear responses in both electrochemical and fluorescence assays. It achieved detection ranges of 10 fg/mL - 300 ng/mL and 60 fg/mL - 100 ng/mL with detection limits (LODs) of 1.4 fg/mL and 2.3 fg/mL. The sensor exhibited exceptional detection performance, stability and anti-interference. In addition, the results of the sensor in actual samples were consistent with those of enzyme-linked immunosorbent assay (ELISA), which further demonstrated that the sensor could accurately trace detecting CBZ in real samples and had a certain application prospect.

Highly active Ti3C2Tx MXene nanoribbons@AuPt bimetallic nanozyme constructed in a "two birds with one stone" manner for colorimetric sensing of dipterex

The bimetallic nanoparticles have received significant attention in the field of colorimetric sensing, while the majority of the previous methods for synthesizing such nanoparticles typically require the use of reducers and involve highly harsh synthesis conditions. In this work, the AuPt bimetallic nanoparticles (AuPtNPs) decorated Ti3C2TxNR nanohybrid (Ti3C2TxNR@AuPt) was firstly synthesized in a "two birds with one stone" manner. Innovatively, during the synthesis process, Ti3C2TxNR served as both reducing agent and supporting agent to prevent aggregation of bimetallic nanoparticles. Due to the good synergistic effect of AuPtNPs and the strong metal-support interaction between AuPtNPs and Ti3C2TxNR, the as-prepared Ti3C2TxNR@AuPt exhibited boosted peroxidase (POD)-like activity. In advantage of the exceptional POD-like activity, a cost-effective and sensitive colorimetric sensing platform was fabricated for dipterex detection with a broad linearity of 1.0 ng mL-1-1.0 μg mL-1 and a low detection limit (0.479 ng mL-1). The detection of dipterex in insecticide samples also yielded favorable recoveries. Moreover, this approach provided a convenient and effective strategy to design and develop novel nanozymes via a "two birds with one stone" strategy.

Nanozyme coating-gated multifunctional COF composite based dual-ratio enhanced dual-mode sensor for highly sensitive and reliable detection of organophosphorus pesticides in real samples

The reliable detection of organophosphorus pesticides (OPs) in complex matrices remains an enormous challenge due to inevitable interference of sample matrices and testing factors. To address this issue, we designed a nanozyme-coated mesoporous COF with guest molecule loading, and successfully used it to construct a dual-ratio dual-mode sensor through target-regulated signal generation. The multifunctional COF-based composite (MB/COF@MnO2, MCM) featured high loading of methylene blue (MB), oxidase-like MnO2 coatings as gatekeepers, and specific recognition of thiocholine (TCh). TCh, a regulator produced from acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylthiocholine, could decompose MnO2 coatings, triggering the release of abundant MB and oxidation of few o-phenylenediamine (OPD). OPs, strong inhibitors of AChE, could restrain TCh production and MnO2 decomposition, thereby controlling the release of less MB and oxidation of more OPD. This regulation boosted the dual-ratio dual-mode assay of OPs by using the released MB and oxidized OPD in the solution as testing signals, measured by both fluorescent and electrochemical methods. Experimental results demonstrated the sensitive detection of dichlorvos with LODs of 0.083 and 0.026 ng/mL via the fluorescent/electrochemical mode, respectively. This study represented a creative endeavor to develop dual-ratio dual-mode sensors for OPs detection in complex samples, offering high sensitivity, excellent selectivity, and good reliability.

Redox interference-free bimodal paraoxon sensing enabled by an aggregation-induced emission nanozyme catalytically hydrolyzing phosphoesters specifically

In view of the current serious situation of organophosphorus pesticides (OPs) residue contamination, developing rapid and accurate OPs sensors is a matter of urgency. Redox-nanozyme based colorimetric sensors have been widely researched and utilized in OPs residue determination, but overcoming the interference of external redox substances and the effect of single-signal modes on detection performance is still a challenge. Here we fabricated a Zr-based metal-organic framework (MOF) featuring specific phosphatase-like activity and strong aggregation-induced emission (AIE) fluorescence for redox interference-free bimodal pesticide sensing. In the MOF, the activity-tunable Zr4+ node offered high hydrolytic activity and affinity toward P-O containing substrates, and the rigid framework structure effectively enhanced the fluorescence emission of the ligand 1,1,2,2-tetra(4-carboxylphenyl)ethylene. The developed AIEzyme could efficiently catalyze the hydrolysis of paraoxon to yellow p-nitrophenol, which further reduced the intrinsic AIE fluorescence of AIEzyme through internal filtration effect. Thereby, a natural enzyme-free dual-mode colorimetric/fluorescence approach was established for paraoxon detection with no interference from redox substances, and a smartphone-assisted portable platform was further developed to enable the facile, rapid, and high-performance sensing of the pesticide in complex practical matrices.

Smartphone-integrated visual inspection for enhancing agricultural product quality and safety: a review

The increasing emphasis on the quality and safety of agricultural products, which are vital to global trade and consumer health, has driven the innovation of cost-effective, convenient, and rapid smart detection technologies. Smartphones, with their interdisciplinary functionalities, have become valuable tools in quantification and analysis research. Acting as portable, affordable, and user-friendly analytical devices, smartphones are equipped with high-resolution cameras, displays, memory, communication modules, sensors, and operating systems (Android or IOS), making them powerful, palm-sized remote computers. This review delves into how visual inspection technology and smartphones have enhanced the quality and safety of agricultural products over the past decade. It also evaluates the key features and limitations of existing smart rapid inspection methods for agricultural products and anticipates future advancements, offering insights into the application of smart rapid inspection technology in agriculture.

Colorimetric/fluorescent dual-mode assay for antioxidant capacity of gallnuts based on CuCo nanozyme and AIE luminogen

In this work, we present a dual-mode assay system consisting of a nanozyme and a luminogen with the aggregation-induced emission (AIE) feature. In the assay system, the chosen nanozyme named CuCo-0 catalyzes the substrate to produce colorimetric signals, while the aggregates of H4ETTC (4,4',4″,4‴-(ethene-1,1,2,2-tetrayl) tetrakis ([1,1'-biphenyl]-4-carboxylic acid), a typical AIE luminogen, generate fluorescent signals. The peroxidase-like activity of the CuCo-0 nanozyme can be remarkably suppressed with sequential additions of antioxidants, leading to a dual-signal response characterized by enhanced fluorescence emission and reduced UV-vis absorbance. On this basis, a dual-mode assay capable of producing both colorimetric and fluorescent signals for the assessment of antioxidant capacity using gallic acid as a representative antioxidant was exploited. Good linearity can be obtained in the 0-60 μM range for both colorimetric analysis and fluorescent analysis, with detection limits of 1.3 μM and 0.35 μM, respectively. Furthermore, this dual-mode assay was successfully applied to real gallnut samples, yielding satisfactory results.

AIE fluorescent nanozyme-based dual-mode biosensor for analysis of the bioactive component hypoxanthine in meat products

The development of facile, low-cost reliable, and precise onsite assays for the bioactive component hypoxanthine (Hx) in meat products is significant for safeguarding food safety and public health. Herein, we proposed a smartphone-assissted aggregation-induced emission (AIE) fluorogen tetraphenylethene (TPE)-incorporated amorphous Fe-doped phosphotungstates (Fe-Phos@TPE) nanozyme-based ratiometric fluorescence-colorimetric dual-mode biosensor for achieving the onsite visual detection of Hx. When the Hx existed, xanthine oxidase (XOD) catalyzed Hx into H2O2 to be further catalyzed into •OH by the prominent peroxidase activity of Fe-Phos@TPE at pH = 6.5, resulting in the oxidization of nonfluorescent o-phenylenediamine (OPD, naked-eye colorless) to be yellow fluorescent emissive 2,3-diaminophenazine (DAP, naked-eye dark yellow) at 550 nm as well as the intrinsic blue fluorescence of Fe-Phos@TPE at 440 nm to be decreased via inner-filter effect (IFE) action, thereby realizing a multi-enzyme cascade catalytic reaction at near-neutral pH to overcome the traditional acidity dependence-induced time-consuming and low sensitivity troublesome.

Sensitive colorimetric and fluorescence dual-mode detection of thiophanate-methyl based on spherical Fe3O4/GONRs composite nanozyme

Pesticide detection based on nanozyme is largely limited in terms of the variety of pesticides. Herein, a spherical and well-dispersed Fe3O4/graphene oxide nanoribbons (Fe3O4/GONRs) composite nanozyme was applied to firstly develop an enzyme-free and sensitive colorimetric and fluorescence dual-mode detection of thiophanate-methyl (TM). The synthesized Fe3O4/GONRs possess excellent dual enzyme-like activities (peroxidase and catalase) and can catalyze H2O2 to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into oxidized TMB (oxTMB). We found that Fe3O4/GONRs can adsorb TM through the synergistic effect of multiple forces, thereby inhibiting the catalytic activities of nanozyme. This inhibition can modulate the transformation of TMB to oxTMB, producing dual responses of absorbance decrease (oxTMB) and fluorescence enhancement (TMB). The limits of detection (LODs) of TM were 28.1 ng/mL (colorimetric) and 8.81 ng/mL (fluorescence), respectively. Moreover, the developed method with the recoveries of 94.8-100.8% also exhibited a good potential application in the detection of pesticides residues in water and food samples.

Programming of a Portable Digital Monitoring System-Integrated DNA Aptamer Reversely Regulated Oxidase-Like Nanozyme for Real-Time Dynamic Analysis of Atmospheric Perfluorooctanoic Acid

Timely and efficient analysis of the fluorinated per- and polyfluoroalkyl substances (PFAS) in an atmospheric environment is critical to environmental pollution traceability, early warnings, and governance. Here, a portable, reliable, and intelligent digital monitoring device for onsite real-time dynamic analysis of atmospheric perfluorooctanoic acid (PFOA) is proposed. The sensing mechanism is attributed to the oxidase-like activity of PtCoNPs@g-C3N4 that is reversely regulated by the surface modification of a PFOA-recognizable DNA aptamer, engineering a PFOA-activated oxidase-like activity of nanozyme (Apt-PtCoNPs@g-C3N4) to combine the nonfluorescence o-phenylenediamine (OPD) as the dual-modality response system. The present PFOA interacts with its DNA aptamer and dissociates from the surface of Apt-PtCoNPs@g-C3N4, restoring the oxidase-like activity of PtCoNPs@g-C3N4 to oxidize OPD into yellow fluorescence 2,3-diphenylaniline (DAP), thereby observing a PFOA-triggered colorimetric as well as fluorescence dual-modality change. Then, a hydrogel kit-programmed Apt-PtCoNPs@g-C3N4 + OPD system is used as the sensitive element to incorporate into this homemade portable device, automatically gathering and processing the PFOA-triggered hydrogel colorimetric and fluorescence image gray values by our self-weaving software, ultimately realizing the onsite real-time dynamic analysis of atmospheric PFOA surrounding a fluorochemical production plant. This work provides a direction and theoretical foundation for designing portable onsite screening devices that cater to other atmospheric contaminants detection requirements.

Facile synthesis of copper carbonate analog with peroxidase-like activity for colorimetric detection of isoniazid

In this article, copper carbonate analog with good peroxidase-like activity was successfully synthesized for the first time via a simple co-precipitation of CuSO4▪5H2O and Na2CO3. The obtained copper carbonate analog exhibited excellent intrinsic peroxidase-like activity towards a classical peroxidase substrate of 3, 3', 5, 5' -tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2) under an acidic environment. The study of the catalytic mechanism confirmed that the hydroxyl radical produced from the decomposition of H2O2 is the main reactive oxygen species responsible for the catalytic oxidation of TMB to oxTMB. Moreover, results from kinetic parameter analysis indicated that H2O2 was more easily and/or likely to attach to the copper carbonate analog than TMB. Subsequently, the effects of experimental conditions (buffer pH, temperature, and incubation time) on the catalytic activity of the copper carbonate analog were also optimized. Finally, a copper carbonate analog-based colorimetric sensor was developed to determine isoniazid. Under the optimal conditions, the linear range for isoniazid was as broad as 0-178.6 μM, and the detection limit was as low as 8.47 μM. The spiked recoveries of isoniazid in normal human serum has been observed in the range of 94.8%-105.5 %. This strategy focuses on the development of a green, cost-efficient peroxidase mimic with high activity, good biocompatibility, and a simple synthesis process.

Intelligent onsite dual-modal assay based on oxidase-like fluorescence carbon dots-driven competitive effect for ethyl carbamate detection

Intelligent onsite accurate monitoring ethyl carbamate (EC, a group 2 A carcinogen) in environment is of great significance to safeguard environmental health and public safety. Herein, we reported an intelligent dual-modal point-of-care (POC) assay based on the bimetallic Mn and Ce co-doped oxidase-like fluorescence carbon dots (Ce&MnCDs) nanozyme-driven competitive effect. In brief, the oxidase-like activity of Ce&MnCDs was inhibited by thiocholine (TCh, originating from the hydrolysis of acetylcholinesterase (AChE) to acetylthiocholine (ATCh)), preventing the oxidation of o-phenylenediamine (OPD) to 2,3-diaminophenothiazine (DAP). However, with the aid of Br2 + NaOH, EC inactivated AChE to prevent TCh generation for re-launching the oxidase-like activity of Ce&MnCDs to trigger the oxidation of OPD into DAP, thereby outputting an EC concentration-dependent ratiometric fluorescence and colorimetric readouts by employing Ce&MnCDs and OPD as the optical signal reporters. Interestingly, these dual-modal optical signals could be transduced into the gray values that was linearly proportional to the residual levels of EC on a smartphone-based portable platform, with a detection limit down to 1.66 μg/mL, qualifying the requirements of analysis of EC residues in real samples. This opened up a new avenue for onsite assessment of the risk of residues of EC, safeguarding environmental health and public safety.

Tunable Structured 2D Nanobiocatalysts: Synthesis, Catalytic Properties and New Horizons in Biomedical Applications

2D materials have offered essential contributions to boosting biocatalytic efficiency in diverse biomedical applications due to the intrinsic enzyme-mimetic activity and massive specific surface area for loading metal catalytic centers. Since the difficulty of high-quality synthesis, the varied structure, and the tough choice of efficient surface loading sites with catalytic properties, the artificial building of 2D nanobiocatalysts still faces great challenges. Here, in this review, a timely and comprehensive summarization of the latest progress and future trends in the design and biotherapeutic applications of 2D nanobiocatalysts is provided, which is essential for their development. First, an overview of the synthesis-structure-fundamentals and structure-property relationships of 2D nanobiocatalysts, both metal-free and metal-based is provided. After that, the effective design of the active sites of nanobiocatalysts is discussed. Then, the progress of their applied research in recent years, including biomedical analysis, biomedical therapeutics, pharmacokinetics, and toxicology is systematically highlighted. Finally, future research directions of 2D nanobiocatalysts are prospected. Overall, this review to provide cutting-edge and multidisciplinary guidance for accelerating future developments and biomedical applications of 2D nanobiocatalysts is expected.

Smartphone-assisted array discrimination of sulfur-containing compounds and colorimetric-fluorescence dual-mode sensor for detection of 1,4-benzenedithiol based on peroxidase-like nanozyme g-C3N4@Cu, N-CDs

Present work reported a novel nanozyme g-C3N4@Cu, N-CDs with excellent peroxidase-like activity obtained by loading Cu and N co-doped carbon dots on g-C3N4 (graphitic carbon nitride). g-C3N4@Cu, N-CDs can catalyze H2O2 to generate hydroxyl radical •OH, which oxidizes o-phenylenediamine to 2,3-diaminophenazine, which emits orange fluorescence under ultraviolet light irradiation. The experimental results confirmed that 1,4-benzenedithiol (BDT) could inhibit the peroxidase-like activity of g-C3N4@Cu, N-CDs. Based the principle above, a colorimetric-fluorescence dual-mode sensor for rapidly sensing of BDT was creatively constructed with assisting of a smartphone. The sensor showed excellent linearity over ranges of 0.75-132 μM and 0.33-60.0 μM with detection limits of 0.32 μM and 0.25 μM for colorimetric and fluorescence detection, respectively. Moreover, a smartphone-assisted colorimetric array sensor was constructed to distinguish six sulfur-containing compounds according to the difference in the degree of inhibition of nanozyme activity by different sulfur-containing compounds. The array sensor could distinguish sulfur-containing compounds at low concentration as low as 0.4 μM. The results validated that the designed sensor was a convenient and fast platform, which could be utilized as a reliably portable tool for the efficient and accurate detection of BDT and the discrimination of multiple sulfur compounds in real water samples.

The preparation and dual-mode detection of ascorbic acid based on poly(N-isopropylacrylamide) nanogel with oxidase-like activity

Nanozymes have recently become a research hotspot because of the advantages of good stability, excellent catalytic performance and easy storage in comparison to natural enzymes. Nanozymes with oxidase-like activity get special attention because they needn't the participation of hydrogen peroxide. In this paper, poly(N-isopropylacrylamide) nanogel with oxidase-like activity was synthesized for the first time. The catalytic mechanism was explored by EPR and UV spectroscopy after adding specific trapping agents of ROS, and the results showed that PNIPAM NG can catalyze O2 to 1O2. In the presence of PNIPAM NG, o-phenylenediamine (OPD) and ascorbic acid (AA) can be oxidized to 2,3-diaminophenazine (oxOPD) and dehydroascorbic acid (DHA), and DHA can further react with OPD to produce a fluorescence substance. The colorimetric and fluorescence detection platforms for AA were constructed based on the above principles. Both platforms have satisfactory results in real samples. The fluorescence platform has better sensitivity and selectivity than the colorimetric platform.

Smartphone-Based Free-to-Total Prostate Specific Antigen Ratio Detection System Using a Colorimetric Reaction Integrated with Proximity-Induced Bio-Barcode and CRISPR/Cas12a Assay

The free-to-total prostate-specific antigen (f/t-PSA) ratio is of great significance in the accurate diagnosis of prostate cancer. Herein, a smartphone-based detection system is reported using a colorimetric reaction integrated with proximity-induced bio-barcode and the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a assay for f/t-PSA ratio detection. DNA/antibody recognition probes are designed to bind f-PSA or t-PSA and induce the release of the DNA bio-barcode. The CRISPR/Cas12a system is activated by the DNA bio-barcode to release Ag+ from the C-Ag+-C structure of the hairpin DNA. The released Ag+ is used to affect the tetramethylbenzidine (TMB)-H2O2-based colorimetric reaction catalyzed by Pt nanoparticles (NPs), as the peroxidase-like activity of the Pt NPs can be efficiently inhibited by Ag+. A smartphone with a self-developed app is used as an image reader and analyzer to analyze the colorimetric reaction and provide the results. A limit of detection of 0.06 and 0.04 ng mL-1 is achieved for t-PSA and f-PSA, respectively. The smartphone-based method showed a linear response between 0.1 and 100 ng mL-1 of t-PSA or f-PSA. In tests with clinical samples, the smartphone-based method successfully diagnosed prostate cancer patients from benign prostatic hyperplasia patients and healthy cases with high sensitivity and specificity.

Digitalization of Colorimetric Sensor Technologies for Food Safety

Colorimetric sensors play a crucial role in promoting on-site testing, enabling the detection and/or quantification of various analytes based on changes in color. These sensors offer several advantages, such as simplicity, cost-effectiveness, and visual readouts, making them suitable for a wide range of applications, including food safety and monitoring. A critical component in portable colorimetric sensors involves their integration with color models for effective analysis and interpretation of output signals. The most commonly used models include CIELAB (Commission Internationale de l'Eclairage), RGB (Red, Green, Blue), and HSV (Hue, Saturation, Value). This review outlines the use of color models via digitalization in sensing applications within the food safety and monitoring field. Additionally, challenges, future directions, and considerations are discussed, highlighting a significant gap in integrating a comparative analysis toward determining the color model that results in the highest sensor performance. The aim of this review is to underline the potential of this integration in mitigating the global impact of food spoilage and contamination on health and the economy, proposing a multidisciplinary approach to harness the full capabilities of colorimetric sensors in ensuring food safety.

Ratiometric fluorescence and colorimetric strategies for assessing activity of butyrylcholinesterase in human serum using g-C3N4 nanosheets, silver ion and o-phenylenediamine

Ratiometric fluorescence and colorimetric strategies for detecting activity of butyrylcholinesterase (BChE) in human serum were developed by using g-C3N4 nanosheets, silver ion (Ag+) and o-phenylenediamine (OPD) as chromogenic agents. The oxidation-reduction reaction of OPD and Ag+ generates 2,3-diaminophenazine (oxOPD). Under exciation at 370 nm, g-C3N4 nanosheets and oxOPD emit fluorescence at 440 nm (F440) and 560 nm (F560), respectively. Additionally, oxOPD exhibits quenching ability towards g-C3N4 nanosheets via photoinduced electron transfer (PET) process. Thiocholine (TCh), as a product of BChE-catalyzed hydrolysis reaction of butylthiocholine iodide (BTCh), can coordinate with Ag+ intensively, and consequently diminish the amount of free Ag+ in the testing system. Less amount of free Ag+ leads to less production of oxOPD, resulting in less fluorescence quenching towards g-C3N4 nanosheets as well as less fluorescence emission of oxOPD. Therefore, by using g-C3N4 nanosheets and oxOPD as fluorescence indicators, the intensity ratio of their fluorescence (F440/F560) was calculated and employed to evaluate the activity of BChE. Similarly, the color variation of oxOPD indicated by the absorbance at 420 nm (ΔA420) was monitored for the same purpose. These strategies were validated to be sensitive and selective for detecting BChE activity in human serum, with limits of detection (LODs) of 0.1 U L-1 for ratiometric fluorescence mode and 0.7 U L-1 for colorimetric mode.

The Fluorescent Detection of Glucose and Lactic Acid Based on Fluorescent Iron Nanoclusters

In this paper, a novel fluorescent detection method for glucose and lactic acid was developed based on fluorescent iron nanoclusters (Fe NCs). The Fe NCs prepared using hemin as the main raw material exhibited excellent water solubility, bright red fluorescence, and super sensitive response to hydrogen peroxide (H2O2). This paper demonstrates that Fe NCs exhibit excellent peroxide-like activity, catalyzing H2O2 to produce hydroxyl radicals (•OH) that can quench the red fluorescence of Fe NCs. In this paper, a new type of glucose sensor was established by combining Fe NCs with glucose oxidase (GluOx). With the increase in glucose content, the fluorescence of Fe NCs decreases correspondingly, and the glucose content can be detected in the scope of 0-200 μmol·L-1 (μM). Similarly, the lactic acid sensor can also be established by combining Fe NCs with lactate oxidase (LacOx). With the increase in lactic acid concentration, the fluorescence of Fe NCs decreases correspondingly, and the lactic acid content can be detected in the range of 0-100 μM. Furthermore, Fe NCs were used in the preparation of gel test strip, which can be used to detect H2O2, glucose and lactic acid successfully by the changes of fluorescent intensity.

Portable hydrogel kit driven by bimetallic carbon dots nanozyme for H2O2-self-supplying dual-modal monitoring of atmospheric CH3SH

Due to the typical volatility of gaseous pollutant methyl mercaptan (CH3SH), the development of a facile, reliable, and accurate onsite environmental surveillance of highly toxic CH3SH faces many challenges, but it is critical to environmental atmosphere assessment and safeguarding public health. Here, we prepared a novel bimetallic carbon dots (Fe&Cu@CDs) nanozyme with high peroxidase-mimicking activity to design a portable hydrogel kit for onsite visual H2O2-self-supplying enzymatic cascade catalytic colorimetric and photothermal signal synergistic amplification dual-modal monitoring of CH3SH in atmospheric environment. Assisted by alcohol oxidase (AOX), CH3SH could be specifically converted into H2O2 for oxidizing chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) catalyzed by Fe&Cu@CDs to produce dark blue ox-TMB with absorption at 652 nm and photothermal characters. Consequently, a CH3SH concentration-dependent change both in naked-eye color and photothermal effect-triggered temperature were observed. By hybridizing AOX-assisted Fe&Cu@CDs + TMB with agarose, a H2O2-self-supplying colorimetric and photothermal signal synergistic amplification sensory hydrogel kit integrated with Color Picker APP-installed smartphone and 660 nm laser-equipped handheld thermal imager for CH3SH was proposed with acceptable results in atmospheric environment around wastepile (e.g., solid waste and food waste piles), which exhibited great potentials to further develop commercial onsite monitoring platforms in warning-early abnormal atmospheric CH3SH for safeguarding environmental health.

AIE fluorogen-based oxidase-like fluorescence nanozyme-integrated smartphone for monitoring the freshness authenticity of soy products

Food safety concerns about the authenticity of soy product freshness have increased due to high demand from public. Developing an accurate and convenient monitoring method for freshness authenticity is crucial for safeguarding food safety. From this motive, this study employed PtPd NPs to encapsulate tetraphenylethylene (TPE) for engineering an AIE-based fluorescent nanozyme (PtPd NPs@TPE) with oxidase-like activity, achieving the ratiometric fluorescence monitoring of putrescine (PUT) to judge the freshness authenticity of soy products. In this design, PUT acted as an antioxidant and inhibited the oxidation process of PtPd NPs@TPE to o-phenylenediamine (OPD), leading to the reduction of oxidative product 2,3-diaminophenothiazine (DAP) alone with the weaken of yellow fluorescence from DAP at 552 nm and bright of bule fluorescence from PtPd NPs@TPE at 442 nm. On this basis, a ratiometric fluorescence strategy integrated with smartphone-based sensor was developed for PUT with acceptable results to combat food freshness fraud of soy products.

Trace Amount of Bi-Doped Core-Shell Pd@Pt Mesoporous Nanospheres with Specifically Enhanced Peroxidase-Like Activity Enable Sensitive and Accurate Detection of Acetylcholinesterase and Organophosphorus Nerve Agents

The urgent need for sensitive and accurate assays to monitor acetylcholinesterase (AChE) activity and organophosphorus pesticides (OPs) arises from the imperative to safeguard human health and protect the ecosystem. Due to its cost-effectiveness, ease of operation, and rapid response, nanozyme-based colorimetry has been widely utilized in the determination of AChE activity and OPs. However, the rational design of nanozymes with high activity and specificity remains a great challenge. Herein, trace amount of Bi-doped core-shell Pd@Pt mesoporous nanospheres (Pd@PtBi2) have been successfully synthesized, exhibiting good peroxidase-like activity and specificity. With the incorporation of trace bismuth, there is a more than 4-fold enhancement in the peroxidase-like performance of Pd@PtBi2 compared to that of Pd@Pt. Besides, no significant improvement of oxidase-like and catalase-like activities of Pd@PtBi2 was found, which prevents interference from O2 and undesirable consumption of substrate H2O2. Based on the blocking impact of thiocholine, a colorimetric detection platform utilizing Pd@PtBi2 was constructed to monitor AChE activity with sensitivity and selectivity. Given the inhibition of OPs on AChE activity, a biosensor was further developed by integrating Pd@PtBi2 with AChE to detect OPs, capitalizing on the cascade amplification strategy. The OP biosensor achieved a detection limit as low as 0.06 ng mL-1, exhibiting high sensitivity and anti-interference ability. This work is promising for the construction of nanozymes with high activity and specificity, as well as the development of nanozyme-based colorimetric biosensors.

Using the Photo-Piezoelectric Effect of AuPt@BaTiO3 Oxidase Mimetics for Colorimetric Detection of GSH in Serum

Nanozymes possess major advantages in catalysis and biosensing compared with natural nanozymes. In this study, the AuPt@BaTiO3 bimetallic alloy Schottky junction is prepared to act as oxidase mimetics, and its photo-piezoelectric effect is investigated. The synergy between the photo-piezoelectric effect and the local surface plasmon resonance enhances the directional migration and separation of photogenerated electrons, as well as hot electrons induced by the AuPt bimetallic alloy. This synergy significantly improves the oxidase-like activity. A GSH colorimetric detection platform is developed based on this fading principle. Leveraging the photo-piezoelectric effect allows for highly sensitive detection with a low detection limit (0.225 μM) and reduces the detection time from 10 min to 3 min. The high recovery rate (ranging from 99.91% to 101.8%) in actual serum detection suggests promising potential for practical applications. The development of bimetallic alloy heterojunctions presents new opportunities for creating efficient nanozymes.

Smartphone-assisted hydrogel platform based on BSA-CeO2 nanoclusters for dual-mode determination of acetylcholinesterase and organophosphorus pesticides

A dual-mode sensor was developed for detecting acetylcholinesterase (AChE) and organophosphorus pesticides (OPs) via bifunctional BSA-CeO2 nanoclusters (NCs) with oxidase-mimetic activity and fluorescence property. The dual-mode sensor has the characteristics of self-calibration and self-verification, meeting the needs of different detection conditions and provide more accurate results. The colorimetric sensor and fluorescence sensor have been successfully used for detecting AChE with limit of detection (LOD) of 0.081 mU/mL and 0.056 mU/mL, respectively, while the LOD for OPs were 0.9 ng/mL and 0.78 ng/mL, respectively. The recovery of AChE was 93.9-107.2% and of OPs was 95.8-105.0% in actual samples. A novel strategy was developed to monitor pesticide residues and detect AChE level, which will motivate future work to explore the potential applications of multifunctional nanozymes.

A portable colorimetric sensing platform for rapid and sensitive quantification of dichlorvos pesticide based on Fe-Mn bimetallic oxide nanozyme-participated highly efficient chromogenic catalysis

BACKGROUND

Dichlorvos (DDVP), as a highly effective insecticide, is widely used in agricultural production. However, DDVP residue in foodstuffs adversely affects human health. Conventional instrumental analysis can provide highly sensitive and accurate detection of DDVP, while the need of bulky and expensive equipment limits their application in resource-poor areas and on-site detection. Therefore, the development of easily portable sensing platforms for convenient, rapid and sensitive quantification of DDVP is very essential for ensuring food safety.

RESULT

A portable colorimetric sensing platform for rapid and sensitive quantification of DDVP is developed based on nanozyme-participated highly efficient chromogenic catalysis. The Fe-Mn bimetallic oxide (FeMnOx) nanozyme possesses excellently oxidase-like activity and can efficiently catalyze oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) into a blue oxide with a very low Michaelis constant (Km) of 0.0522 mM. The nanozyme-catalyzed chromogenic reaction can be mediated by DDVP via inhibiting the acetylcholinesterase (AChE) activity. Thus, trace DDVP concentration-dependent color evolution is achieved and DDVP can be sensitively detected by spectrophotometry. Furthermore, a smartphone-integrated 3D-printed miniature lightbox is fabricated as the colorimetric signal acquisition and processing device. Based on the FeMnOx nanozyme and smartphone-integrated lightbox system, the portable colorimetric sensing platform of DDVP is obtained and it has a wide linear range from 1 to 3000 ng mL-1 with a low limit of detection (LOD) of 0.267 ng mL-1 for DDVP quantification.

SIGNIFICANCE

This represents a new portable colorimetric sensing platform that can perform detection of DDVP in foodstuffs with simplicity, sensitivity, and low cost. The work not only offers an alternative to rapid and sensitive detection of DDVP, but also provides a new insight for the development of advanced sensors by the combination of nanozyme, 3D-printing and information technologies.

Microfluidics in environmental analysis: advancements, challenges, and future prospects for rapid and efficient monitoring

Microfluidic devices have emerged as advantageous tools for detecting environmental contaminants due to their portability, ease of use, cost-effectiveness, and rapid response capabilities. These devices have wide-ranging applications in environmental monitoring of air, water, and soil matrices, and have also been applied to agricultural monitoring. Although several previous reviews have explored microfluidic devices' utility, this paper presents an up-to-date account of the latest advancements in this field for environmental monitoring, looking back at the past five years. In this review, we discuss devices for prominent contaminants such as heavy metals, pesticides, nutrients, microorganisms, per- and polyfluoroalkyl substances (PFAS), etc. We cover numerous detection methods (electrochemical, colorimetric, fluorescent, etc.) and critically assess the current state of microfluidic devices for environmental monitoring, highlighting both their successes and limitations. Moreover, we propose potential strategies to mitigate these limitations and offer valuable insights into future research and development directions.

FRET-Based Host-Guest Supramolecular Probe for On-Site and Broad-Spectrum Detection of Pyrethroids in the Environment

The massive use of pyrethroid pesticides in agriculture has brought growing concerns about food safety due to their several harmful effects on human health, especially through the accumulation of the food chain. To date, most of the available analytical methods for pyrethroids still suffer from insufficient detection universality, complicated sample pretreatment, and detection processes, which severely limit their practical applications. Herein, a novel Förster resonance energy transfer (FRET)-assisted host-guest supramolecular nanoassembly is reported, for the first time, successfully realizing ratiometric fluorescent detection of pyrethroids in real samples through the indicator displacement assay (IDA) mechanism. This method is capable of detecting a broad spectrum of pyrethroids, including bifenthrin, cyfluthrin, cypermethrin, deltamethrin, etofenprox, fenvalerate, and permethrin, with ultrahigh detection sensitivity, great selectivity, high anti-interference ability, and, in particular, distinct emission color response from red to green. Such a large chromatic response makes this method available for fast and on-site detection of pyrethroids in real samples with the aid of several simple portable analytical apparatuses.

Portable sensors equipped with smartphones for organophosphorus pesticides detection

Organophosphorus pesticides (OPs) play an important role in agricultural production and the accurate detection of OP residues is essential to ensure food safety. Portable sensors are expected to be a potential device due to their high detection efficiency, easy-to-use processes and low cost. Due to the widespread popularity and powerful capabilities of smartphones, smartphone-based sensing systems have rapidly developed into ideal tools for portable detection, however, a systematic review on the detection of OPs is still lacking. Therefore, a comprehensive overview of sensors equipped with smartphones for OP detection in recent year is provided; this overview includes their sensing signals (colorimetric, fluorescent, chemiluminescent and electrochemical signals), detection mechanism, analysis applications, advantages/disadvantages and perspectives. Moreover, the progress of sensors equipped with smartphones for the detection of OPs in food is thoroughly summarized. This review contributes to food safety and the development of efficient and reliable methods for smartphone-based OPs detection.

Fluorescent and smartphone imaging detection of tetracycline residues based on luminescent europium ion-functionalized the regular octahedral UiO-66-NH2

Antibiotic residues cause extensive damage to food security, thus arousing serious concerns. Hence, rapid and sensitive detection of antibiotic residues is crucial to food safety. This study aimed to propose a portable, visual, intelligent and rapid method for tetracycline detection. We developed a ratiometric fluorescent sensor based on the Eu3+-functionalized regular octahedral UiO-66-NH2 material. The developed sensor could quantify tetracycline in the concentration range of 0.5-200 μM with a detection limit as low as 0.2 μM under the optimum conditions. Furthermore, the analytical results obtained using the designed sensor in the actual samples were basically consistent with those obtained using high-performance liquid chromatography. Based on these achievements, a smartphone application-integrated fluorescent testing paper was designed for facile, intelligent, and visual detection of tetracycline. The integrated portable sensor not only saved cost and time for testing but also provided a forward-looking approach to fast, sensitive detection of antibiotic residues.

Co-, N-doped carbon dot nanozymes based on an untriggered ROS generation approach for anti-biofilm activities and in vivo anti-bacterial treatment

Bacterial infections originating from food, water, and soil are widely recognized as significant global public health concerns. Biofilms are implicated in approximately two-thirds of bacterial infections. In recent times, nanomaterials have emerged as potential agents for combating biofilms and bacteria, with many of them being activated by light and H2O2 to generate reactive oxygen species (ROS). However, this energy-consuming and extrinsic substrate pattern poses many challenges for practical application. Consequently, there is a pressing need to develop methods for the untriggered generation of ROS to effectively address biofilm and bacterial infections. In this study, we investigated the oxidase-like activity of the Co,N-doped carbon dot (CoNCD) nanozyme, which facilitated the oxidation of ambient O2 to generate 1O2 in the absence of light and H2O2 supplementation; this resulted in effective biofilm cleavage and enhanced bactericidal effects. CoNCDs could become a potential candidate for wound healing and treatment of acute peritonitis in vivo, which can be primarily attributed to the spontaneous production of ROS. This study presents a convenient ROS generator that does not necessitate any specific triggering conditions. The nanozyme properties of CoNCDs exhibit significant promise as a potential remedy for diseases, specifically as an anti-biofilm and anti-bacterial agent.

A cost-effective, "mix & act" G-quadruplex/Cu (II) metal-nanozyme-based ratiometric fluorescent platform for highly sensitive and selective cysteine/bleomycin detection and multilevel contrary logic computing

Versatile nanozymes with fascinating catalytic properties provide inspiring and effective options for biosensing and pharmaceutical analysis. Herein, we report the first nanozyme-based ratiometric fluorescent platform for cysteine (Cys) and bleomycin (BLM) detection by harnessing the cost-effective and "mix & act" G-quadruplex/Cu(II) (G4/Cu) metal-nanozyme with satisfactory peroxidase-like activity, which was fully proven by circular dichroism (CD), electron paramagnetic resonance (EPR) spectra and reactive oxygen species (ROS) scavenging experiments. Based on the catalytic oxidation of G4/Cu metal-nanozyme toward two fluorescent substrates (Amplex Ultrared, AU; Scopoletin, Sc) with opposite responses in the presence of H2O2, and the specific interaction between Cu2+ and targets, we achieved the highly sensitive detection of Cys and BLM. Through recording the fluorescence changes of AU (emission at 590 nm, F590) and Sc (emission at 465 nm, F465), we obtained good linear relationships between ratiometric fluorescence values (F590/F465) and variable contents of targets, resulting in the competitive LODs of Cys (6.7 nM) and BLM (10 nM), respectively. Moreover, this platform presented high selectivity (without the need for masking agent) and acceptable performance in human serum samples. Furthermore, a library of DNA contrary logic pairs (CLPs) and multilevel concatenated circuits were fabricated based on the reverse dual-output of the above platform, enriching the building blocks of biocomputing. This work not only enlightened the design of affordable, "mix & act" type nanozyme-based ratiometric biosensors with high reliability, but also facilitated the pluralistic application of nucleic acid-templated nanozymes to innovative biocomputing.

Dual-Signal Imaging Mode Based on Fluorescence and Electrochemiluminescence for Ultrasensitive Visualization of SARS-CoV-2 Spike Protein

Accurate and reliable detection of SARS-CoV-2 is critical for the effective prevention and rapid containment of COVID-19. Current approaches suffer from complex procedures or a single signal readout, resulting in an increased risk of false negatives and low sensitivity. Here, we developed a fluorescence (FL) and electrochemiluminescence (ECL) dual-mode imaging platform based on a self-powered DNAzyme walker to achieve accurate surveillance of SARS-CoV-2 spike protein at the single-molecule level. The specific activation of the DNAzyme walker by the target protein provides the power for the system's continuous running, enabling the simultaneous recording of the reduction in fluorescence spots and the appearance of ECL spots generated by the Ru-doped metal-organic framework (MOF) emitter. Therefore, the constructed imaging platform can achieve dual-mode detection of spike protein via reverse dual-signal feedback, which could effectively eliminate false-positive or false-negative signals and improve the detection accuracy and sensitivity with a low detection limit. In particular, the dual-mode accuracy of spike protein diagnosis in samples has been significantly improved compared to single-signal output means. In addition, this dual-mode imaging platform may become a prospective diagnostic device for other infectious viruses.

Silver metallization-triggered liposome-embedded AIE fluorophore for dual-mode detection of biogenic amines to fight food freshness fraud

To combat food freshness fraud, it is urgent to develop a method which could realize the detection of biogenic amines (BAs) present in food. In our study, we developed a colorimetric and ratiometric fluorescence dual-mode sensor which integrated with silver metallization-based response system of AIE liposome + OPD + RSM + Ag+ toward BAs in foods for fighting freshness fraud. With the hydrolysis from the alkaline of BAs to resorcinol monoacetate (RSM), the production resorcinol (RS) could metallize silver ion (Ag+) to silver atoms (Ag0) which could lead to a BAs concentration-dependent decrease of the oxidation product 2,3-diaminophenothiazine (DAP) of Ag+ to o-phenylenediamine (OPD). As a result, the dual-mode sensor has a low detection limit and wide linear range in the spiked detection of soy products, pork and milk samples for BAs. Thus, providing a reliable method for food safety and forestalling food freshness fraud.

A fluorescent method for bisphenol A detection based on enzymatic oxidation-mediated emission quenching of silicon nanoparticles

As a common raw material of industrial products, bisphenol A (BPA) is widely used in the production of food contact materials, and there is a high risk of exposure in food. However, BPA is a well-known endocrine disruptor and poses a serious threat to human health. Herein, a fluorescent sensing platform of BPA based on enzymatic oxidation-mediated fluorescence quenching of silicon nanoparticles (SiNPs) is established and used to the detection of BPA in food species. The SiNPs are prepared with a facile one-step synthesis and emit bright green fluorescence. BPA can be oxidized by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) to form a product which can quench the fluorescence of SiNPs through electron transfer. There is a good linear relationship between the fluorescence intensity and BPA concentration in the range of 1-100 μM. Therefore, a fluorometry of BPA is established with a low limit of detection (LOD) of 0.69 μM. This method has been applied to the determination of BPA in mineral drinking water, orange juice, and milk with satisfactory results. The fluorescent sensor of BPA based on SiNPs has favorable application foreground in the field of food safety analysis.

Development of a highly sensitive immunoassay based on pentameric nanobodies for carcinoembryonic antigen detection

BACKGROUND

Carcinoembryonic antigen-related cell adhesion molecule 5 (CEACAM-5) is a well-characterized biomarker for the clinical diagnosis of various cancers. Nanobodies, considered the smallest antibody fragments with intact antigen-binding capacity, have gained significant attention in disease diagnosis and therapy. Due to their peculiar properties, nanobodies have become promising alternative diagnostic reagents in immunoassay. However, nanobodies-based immunoassay is still hindered by small molecular size and low antigen capture efficacy. Therefore, there is a pressing need to develop novel nanobody-based immunoassays with superior performance.

RESULTS

A novel pentameric nanobodies-based immunoassay (PNIA) was developed with enhanced sensitivity and specificity for CEACAM-5 detection. The binding epitopes of three anti-CEACAM-5 nanobodies (Nb1, Nb2 and Nb3) were analyzed. To enhance the capture and detection efficacy of CEACAM-5 in the immunoassay, we engineered bispecific nanobodies (Nb1-Nb2-rFc) as the capture antibody, and developed the FITC-labeled pentameric nanobodies (Nb3-VT1B) as the detection antibody. The binding affinities of Nb1-Nb2-rFc (1.746 × 10-10) and Nb3-VT1B (1.279 × 10-11) were significantly higher than those of unmodified nanobodies (Nb1-rFc, 4.063 × 10-9; Nb2-rFc, 2.136 × 10-8; Nb3, 3.357 × 10-9). The PNIA showed a linear range of 0.625-160 ng mL-1 with a correlation coefficient R2 of 0.9985, and a limit of detection of 0.52 ng mL-1, which was 24-fold lower than the immunoassay using monomeric nanobody. The PNIA was validated with the spiked human serum. The average recoveries ranged from 91.8% to 102% and the coefficients of variation ranged from 0.026% to 0.082%.

SIGNIFICANCE AND NOVELTY

The advantages of nanobodies offer a promising alternative to conventional antibodies in disease diagnosis. The novel PNIA demonstrated superior sensitivity and high specificity for the detection of CEACAM-5 antigen. This bispecific or multivalent nanobody design will provide some new insights into the design of immunoassays for clinical diagnosis.

Ratiometric colorimetric detection of nitrite using CoMnO3 nanofibers as an oxidase-like enzyme to induce diazotization reaction

Nitrite is a typical food additive and preservative used in the food industry, which has attracted considerable attention due to its severe adverse effects on human health. Herein, a sensitive and highly selective ratiometric colorimetric sensing platform for the detection of nitrite was created based on a polymetallic oxide nanozyme, CoMnO3 nanofibers (CMO) catalysis integrated with the particular diazotization reaction. The nanozyme has superior oxidase-like activity (Km was 0.105 mM and Vmax was 63.7 × 10-8 M S-1) and could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to oxidized TMB (oxTMB), as CMO could achieve the conversion of oxygen in the solution to superoxide anion (O2˙-). In addition, it is interesting to note that oxTMB can be diazotized in the presence of nitrite under acidic conditions, causing a shift in the ratio of nitrite concentration to the absorbance peaks at 450 and 652 nm (A450/A652). The ratio of A450/A652 exhibited a positive linear relationship with the concentration of nitrite within the concentration range of 0.2-200 μM, with a detection limit of 0.094 μM. Simultaneously, this method was also successful in quantifying the nitrite produced by brined and pickled foods and the dynamic tracking of the nitrite levels in various types of dishes. The analysis method not only offers dual-signal ratio sensing with high sensitivity but also holds the benefit of outstanding selectivity for the use of the particular reaction, which has a wide range of application prospects in food safety management.

Machine Learning-Assisted High-Throughput Strategy for Real-Time Detection of Spermine Using a Triple-Emission Ratiometric Probe

In this study, we designed and fabricated a spermine-responsive triple-emission ratiometric fluorescent probe using dual-emissive carbon nanoparticles and quantum dots, which improve the sensor's accuracy and reduce interfering environmental effects. The probe is advantageous for the proportionate detection of spermine because it has good emission resolution, and the maximum points of the two emission peaks differ by 95 nm. As a proof of concept, cuvettes and a 96-well plate were combined with a smartphone and YOLO series algorithms to accomplish real-time, visual, and high-throughput detection of seafood and meat freshness. In addition, the reaction mechanism was verified by density functional theory and fundamental characterizations. Upon exposure to different amounts of spermine, the intensity of the fluorescent probe changed linearly, and the fluorescent color shifted from yellow-green to red, with a limit of detection of 0.33 μM. To enable visual identification of food-originated spermine, a hydrogel-based visual sensing platform was successfully developed utilizing the triple-emission fluorescent probe. Consequently, spermine could be identified and quantified without complicated equipment.

Multifunctional light-controllable nanozyme enabled bimodal fluorometric/colorimetric sensing of mercury ions at ambient pH

Nanomaterials with enzyme-like catalytic features (nanozymes) find wide use in analytical sensing. Apart from catalytic characteristics, some other interesting functions coexist in the materials. How to combine these properties to design multifunctional nanozymes for new sensing strategy development is challenging. Besides, in nanozymes it is still a challenge to conveniently control the catalytic process, which also hinders their further applications in advanced biochemical analysis. To remove the above barriers, here we design a light-controllable multifunctional nanozyme, namely manganese-inserted cadmium telluride (Mn-CdTe) particles, that integrates oxidase-like activity with luminescence together, to achieve the fluorometric/colorimetric dual-mode detection of toxic mercury ions (Hg2+) at ambient pH. The Mn-CdTe exhibits a light-triggered oxidase-mimicking catalytic behavior to induce chromogenic reactions, thus enabling one to start or stop the catalytic progress easily via applying or withdrawing light irradiation. Meanwhile, the quantum dot material can exhibit bright photoluminescence, which provides the fluorometric channel to sense targets. When Hg2+ is introduced, it rapidly leans toward Mn-CdTe through electrostatic interaction and Te-Hg bonding and induces the aggregation of the latter. As a result, the luminescence of Mn-CdTe is dynamically quenched, and the masking of active sites in aggregated Mn-CdTe leads to the decrease of light-initiated oxidase-mimetic activity. According to this principle, a new fluorometric/colorimetric bimodal method was established for Hg2+ determination with excellent performance. A 3D-printed portable platform combining paper-based test strips and an App-equipped smartphone was further fabricated, making it possible to achieve in-field sensing of the analyte in various matrices.

Highly-oxidizing Au@MnO2-X nanozymes mediated homogeneous electrochemical detection of organophosphorus independent of dissolved oxygen

Traditional oxidase-like (OXD) nanozymes rely primarily on O2-mediated superoxide anion (O2·-) process for catalytic oxidation and organophosphorus (Ops) detection. While during the actual detection process, the concentration of O2 is inconstant that can be easily changed with the external environment, distorting detection results. Herein, highly-oxidizing Au@MnO2-X nanozymes with core-shell nanostructure are designed which trigger substantial electron transfer from inner Au core to outer ultrathin MnO2-X layer. According to experimental and theoretical calculations, the core-shell nanostructure and ultrathin MnO2-X of Au@MnO2-X result in the large surface defects, high oxygen vacancies and MnIII ratios. The specially structured Au@MnO2-X nanozymes are therefore highly-oxidizing and the catalytic oxidation can be completed merely through electrons transferring instead of the O2-mediated O2·- process. Based on this, an oxygen independent and ultrasensitive nanozyme-based sensor is established using homogeneous electrochemistry (HEC), its Ops is detected at a LOD of 0.039 ng mL-1. Combined with the UV-vis spectrum of 3,3',5,5'-tetramethylbenzidine (TMB), the linear discriminant analysis of five Ops i.e., Ethion, Omethoate, Diazinon, Chlorpyrifos methyl and Dipterex has achieved superior discrimination results. Therefore, HEC based on strong oxidizing nanozymes provide a new avenue for the development of high-performance electrochemical sensors and demonstrate potential applicability to pesticide residue determination in real samples.

Advances in Microfluidics Techniques for Rapid Detection of Pesticide Residues in Food

Food safety is a significant issue that affects people worldwide and is tied to their lives and health. The issue of pesticide residues in food is just one of many issues related to food safety, which leave residues in crops and are transferred through the food chain to human consumption. Foods contaminated with pesticide residues pose a serious risk to human health, including carcinogenicity, neurotoxicity, and endocrine disruption. Although traditional methods, including gas chromatography, high-performance liquid chromatography, chromatography, and mass spectrometry, can be used to achieve a quantitative analysis of pesticide residues, the disadvantages of these techniques, such as being time-consuming and costly and requiring specialist staff, limit their application. Therefore, there is a need to develop rapid, effective, and sensitive equipment for the quantitative analysis of pesticide residues in food. Microfluidics is rapidly emerging in a number of fields due to its outstanding strengths. This paper summarizes the application of microfluidic techniques to pyrethroid, carbamate, organochlorine, and organophosphate pesticides, as well as to commercial products. Meanwhile, the study also outlines the development of microfluidics in combination with 3D printing technology and nanomaterials for detecting pesticide residues in food.