Recent bioreduction of hexavalent chromium in wastewater treatment: A review

Ecological implications of chromium-contaminated effluents from Indian tanneries and their phytoremediation: a sustainable approach

Industrial activities are paramount to sustaining the economy in a rapidly developing nation and global powerhouse like India. Leather industries are important in the country's economic map due to the high revenue and employment generation opportunities. Several of these industries contribute largely to environmental pollution. The pollution of the environment is mainly caused by improper disposal of the tannery effluents that are highly rich in hexavalent chromium, a potent human carcinogen. Hexavalent chromium imparts toxic effects on the biotic components, which include plants, animals, and humans. The review portrays the current status of the Indian leather tanning sector and its impact on the Indian economy. The process of chromium tanning and its adverse effects on the environmental biotic components have been briefly discussed. Phytoremediation of these effluents using suitable hyperaccumulating plants has been suggested as an eco-friendly and cost-effective approach for the sustainable restoration of the polluted environment. The mechanism behind the remediation approach and the factors influencing it have been detailed. The manuscript briefly discusses some important advancements in the field of phytoremediation and emerging technologies and concludes by emphasizing further research for sustainable management of tannery wastes.

Isolation of Aerobic Heterotrophic Bacteria from a Microbial Mat with the Ability to Grow on and Remove Hexavalent Chromium through Biosorption and Bioreduction

Water pollution with toxic hexavalent chromium, Cr(VI), is an environmental threat that has a direct impact on living organisms. The use of microorganisms from microbial mats to remove Cr(VI) has scarcely been investigated. Here, we isolated aerobic heterotrophic bacteria from a Cr-polluted microbial mat found in a mining site in Oman, and investigated their ability to remove Cr(VI), and the underlying mechanism(s) of removal. All isolates fell phylogenetically into the genera Enterobacter, Bacillus, and Cupriavidus, and could completely remove 1 mg L-1 Cr(VI) in 6 days. The strains could tolerate up to 2000 mg L-1 Cr(VI), and exhibited the highest Cr(VI) removal rate at 100 ± 9 mg L-1 d-1. Using scanning electron microscopy (SEM) coupled with elemental analysis, the strains were shown to adsorb Cr(VI) at their cell surfaces. The functional groups OH, NH2, Alkyl, Metal-O, and Cr(VI)-O were involved in the biosorption process. In addition, the strains were shown to reduce Cr(VI) to Cr(III) with the involvement of chromate reductase enzyme. We conclude that the aerobic heterotrophic bacteria isolated from Cr-polluted microbial mats use biosorption and bioreduction processes to remove Cr(VI) from wastewater.

Ferric citrate enhanced bioreduction of Cr(VI) by Bacillus cereus RCr in aqueous solutions: reduction performance and mechanisms

The bioreduction characteristics and mechanisms of Cr(VI) onto Bacillus cereus RCr enhanced by ferric citrate were investigated. The optimum conditions were initial pH 9, temperature 40 °C, inoculation amount 4%, and glucose 3 g/L, respectively. The addition of 1.5 g/L ferric citrate increased the average reduction rate from 120.43 to 220.61 mg/(L∙h) compared with the control (without ferric citrate). The binding capacity of Cr(III) on the cell surface increased to 21%, in which the precipitates were mainly CrO(OH), Cr2O3, and FeCr2O4. Cell membrane was the main site of reduction, related important functional groups: - COOH, C-H, - NH2, C = C, and P-O. Fe(III) increased the yield of NADH and cytochrome c by approximately 48.51% and 68.63%, which significantly facilitated the electron generation and electron transfer, thus increasing the amount of electrons in the bioreduction of heavy metals by an average of 110%. Among the electrons obtained by Cr(VI), the proportion of indirect reduction mediated by Fe(III)/Fe(II) shuttle was 62% on average, whereas direct reduction mediated by reductase was 38%. These results may provide insights into the bioreduction process by bacteria enhanced by Fe(III) for detoxification of heavy metals with multiple valences, as an important step towards improving microbial remediation.

Insight into chromium adsorption from contaminated soil using Mg/Al LDH-zeolite

The study investigated the effectiveness of Mg/Al LDH-zeolite (MALZ) in immobilizing exchangeable Cr (e-Cr) within the soil. The research systematically evaluated various variables affecting the immobilization of e-Cr in contaminated soil (CS), including soil pH levels (ranging from 5.0 to 9.0), different weight ratios of MALZ (1 %, 3 %, and 5 %), durations of differing incubation periods (15, 30 and 45 days), and different SM content levels (30 %, 50 %, and 70 %). The initial concentration of Cr in the CS was maintained at 50 mg/kg. The investigation findings revealed that the optimal conditions for immobilizing the e-Cr were a soil pH of 5.0, an MALZ weight ratio of 3 %, an incubation period of 30 days, and an SM level of 70 %. Under these ideal conditions, the percentage of e-Cr within the CS decreased significantly, from 87.49 % (45.64 mg/kg) in the control treatment (CT) to just 19.82 % (10.08 mg/kg) when incubated with MALZ. The primary mechanisms responsible for immobilizing the e-Cr onto MALZ included pore filling, reduction processes, co-precipitation, organic interactions and electrostatic attractions leading to the formation of carbonate-bound complexes such as Cr(VI)-carbonate, Cr(III)-carbonate, and organic complexes. Surface functional groups on MALZ, housing iron and aluminium oxyhydroxides and silicon and oxygen elements, expedited these procedures. This study provided a valuable understanding of the mitigation of soils contaminated with chromium and contributed to understanding the relations between MALZ and the e-Cr in the soil. The discoveries carry substantial consequences for the advancement of efficient remediation technologies.

Selective Isolation and Identification of Microorganisms with Dual Capabilities: Leather Biodegradation and Heavy Metal Resistance for Industrial Applications

Tanning, crucial for leather production, relies heavily on chromium yet poses risks due to chromium's oxidative conversion, leading to significant wastewater and solid waste generation. Physico-chemical methods are typically used for heavy metal removal, but they have drawbacks, prompting interest in eco-friendly biological remediation techniques like biosorption, bioaccumulation, and biotransformation. The EU Directive (2018/850) mandates alternatives to landfilling or incineration for industrial textile waste management, highlighting the importance of environmentally conscious practices for leather products' end-of-life management, with composting being the most researched and viable option. This study aimed to isolate microorganisms from tannery wastewater and identify those responsible for different types of tanned leather biodegradation. Bacterial shifts during leather biodegradation were observed using a leather biodegradation assay (ISO 20136) with tannery and municipal wastewater as the inoculum. Over 10,000 bacterial species were identified in all analysed samples, with 7 bacterial strains isolated from tannery wastewaters. Identification of bacterial genera like Acinetobacter, Brevundimonas, and Mycolicibacterium provides insights into potential microbial candidates for enhancing leather biodegradability, wastewater treatment, and heavy metal bioremediation in industrial applications.

Extracellular bioreduction is the main Cr(VI) detoxification strategy of Bacillus sp. HL1

Bacterium with high Cr(VI) detoxification capability belonged to the genus Bacillus have been largely explored, yet their reduction strategies are still in debate. Cr(VI) removal performance and mechanism of Bacillus sp. HL1 isolated from tailings a site was comprehensively investigated in this study. Approximately 88.31% of 100 mg/L Cr(VI) was continuously removed within 72 h, while it could resist up to 300 mg/L Cr(VI). Metal ions Mn2+ and Cu2+ could effectively improve the Cr(VI) removal performance to 14.41% and 3.41% under the optimal conditions, respectively. Cr(VI) removal performances by subcellular extracts showed that nearly 45.28% of 100 mg/L extracellular Cr(VI) was efficaciously reduced to Cr(III), while only 14.27%, 6.40%, and 2.73% of the cell-free extract, resting cells, and cell debris were reduced, respectively. This suggested that extracellular bioreduction was the primary Cr(VI) detoxification strategy despite a small part of Cr(VI) reduction took place intracellularly. In particular, the reduction products of the intracellular and extracellular compounds significantly differed, with organo-Cr(III) complex outside the cell and crystalline Cr(III) precipitate inside. Such observation was also evidenced by the intracellular black precipitate observed in the TEM image. XRD, XPS, and EPR analysis showed different Cr(III) compositions of intracellular and extracellular products. This study deepens our insights into the different fates of microorganisms that reduce Cr(VI) intracellularly and extracellularly.

Removal and reduction mechanism of Cr (VI) in Leersia hexandra Swartz constructed wetland-microbial fuel cell coupling system

Cr (VI) is extremely harmful to both the environment and human health, and it can linger in the environment for a very long period. In this research, the Leersia hexandra Swartz constructed wetland-microbial fuel cell (CW-MFC) system was constructed to purify Cr (VI) wastewater. By comparing with the constructed wetland (CW) system, the system electricity generation, pollutants removal, Cr enrichment, and morphological transformation of the system were discussed. The results demonstrated that the L. hexandra CW-MFC system promoted removal of pollutants and production of electricity of the system. The maximum voltage of the system was 499 mV, the COD and Cr (VI) removal efficiency was 93.73% and 97.00%. At the same time, it enhanced the substrate and L. hexandra ability to absorb Cr and change it morphologically transformation. Additionally, the results of XPS and XANES showed that the majority of the Cr in the L. hexandra and substrate was present as Cr (III). In the L. hexandra CW-MFC system, Geobacter also functioned as the primary metal catabolic reducing and electrogenic bacteria. As a result, L. hexandra CW-MFC system possesses the added benefit of removing Cr (VI) while producing energy compared to the traditional CW system.

Field-scale assessment of soil, water, plant, and soil microbiome in and around Rania-Khan Chandpur Chromium contaminated site, India

Rania-Khan Chandpur site, (Kanpur Dehat, Uttar Pradesh, India), one of the highly Chromium (Cr) contaminated sites in India due to Chromite Ore Processing Residue (COPR), has been investigated at the field-scale. We found that the area around the COPR dumps was hazardously contaminated with the Cr where its concentrations in the surface water and groundwater were > 40 mgL-1, its maximum contents in the COPRs and in the soils of the adjoining lands were 9.6 wt% and 3.83 wt%, respectively. By exploring the vegetation and microbial distribution across the site, we advocate the appropriateness of Cynodon dactylon, Chrysopogon zizanioides, Cyperus sp., and Typha angustifolia as the most suitable phytoremediation agent because their association with Cr remediating bacterial species (Pseudomonas sp., Clostridium sp. and Bacillus sp.) was strong. Using this remarkable information for the bioremediation projects, this site can be re-vegetated and bioaugmented to remediate Cr in soils, waterlogged ditches, surface water, and in groundwater systems.

Engaging One Health in Heavy Metal Pollution in Some Selected Nigerian Niger Delta Cities. A Systematic Review of Pervasiveness, Bioaccumulation and Subduing Environmental Health Challenges

The Niger Delta environment is under serious threat due to heavy metal pollution. Many studies have been conducted on the heavy metal contamination in soils, water, seafood and plants in the Niger Delta ecosystem. However, there is a lack of clear understanding of the health consequences for people and strategies for attaining One Health, and a dispersion of information that is accessible. The study focused on investigating the contamination levels, distributions, risks, sources and impacts of heavy metals in selected regions of the Niger Delta. Prior studies revealed that the levels of certain heavy metals, including Cd, Pb, Cu, Cr, Mn, Fe and Ni, in water, sediment, fish and plants in most Niger Delta ecosystems were higher than the acceptable threshold attributed to various anthropogenic stressors. In the reviewed Niger Delta states, ecosystems in Rivers state showed the highest concentrations of heavy metals in most sampled sites. Groundwater quality was recorded at concentrations higher than 0.3 mg/L World Health Organization drinking water guideline. High concentrations of copper (147.915 mg/L) and zinc (10.878 mg/L) were found in Rivers State. The heavy metals concentrations were greater in bottom-dwelling organisms such as bivalves, gastropods and shrimp than in other fishery species. Heavy metal exposure in the region poses risks of communicable and non-communicable diseases. Diverse remediation methods are crucial to reduce contamination levels, but comprehensive strategies and international cooperation are essential to address the health hazards. Actively reducing heavy metals in the environment can achieve One Health objectives and mitigate disease and economic burdens.

Recent advances in enhanced technology of Cr(VI) bioreduction in aqueous condition: A review

Due to the extensive application of chromate in industry, chromium-contaminated water has emerged as a significant hidden danger that threatens human health and the safety of the ecological environment. The reduction of Cr(VI) to Cr(III) through microbial processes has become one of the most notable methods for remediating water polluted by chromium due to its economic efficiency and environmentally friendly nature. However, several issues persist in its practical application, such as low reduction rates, the need for additional nutrients, and challenges in solid-liquid separation. Therefore, there is a growing focus on seeking enhanced methods for Cr(VI) microbial reduction, which has become a key area of research. This review represents the initial effort to systematically classify and summarize the means of enhancing Cr(VI) microbial reduction. It categorizes the enhancement methods into two main approaches: microbial-based and multi-method combined enhancement, offering detailed explanations for their mechanisms. This research provides both inspiration and theoretical support for the practical implementation of the Cr(VI) microbial reduction method.

Preparation of microbial agent immobilized composites for Cr(VI) removal from wastewater

Because of its extreme toxicity and health risks, hexavalent chromium [Cr(VI)] has been identified as a major environmental contaminant. Bioreduction is considered as one of effective techniques for cleaning up Cr(VI)-contaminated sites, but the remediation efficiency needs to be enhanced. Here, a novel immobilized microbial agent was produced by immobilizing Bacillus cereus ZY-2009 with sodium alginate (SA) using polyvinyl alcohol (PVA) and activated carbon (AC). To evaluate the decrease of Cr(VI) by immobilized bacterial agents, batch tests were conducted with varying immobilization conditions, immobilization carriers, and dosages of medication. The removal of Cr(VI) by the agent prepared by the composite immobilization method was better than that by the adsorption and encapsulation methods. The optimal preparation conditions were the fraction of magnetic PVA was 5.00%, the fraction of SA was 4.00%, the fraction of CaCl2 was 4.00%, and the calcification time was 12 h. The experimental results indicated that PVA/SA/AC agents accelerated the reduction rate of Cr(VI). The removal rate of Cr(VI) by immobilized cells (90.5%) under ideal conditions was substantially higher than that of free cells (11.0%). This novel agent had a large specific surface area and a rich pore structure, accounting for its high reduction rate. The results suggest that the PVA/SA/AC immobilized Bacillus cereus ZY-2009 agent has great potential to remove Cr(VI) from wastewater treatment systems.

A sustainable solution for alleviating hexavalent chromium from water streams using Lactococcus lactis AM99 as a novel Cr(VI)-reducing bacterium

Chromium, extensively used in various industries, poses significant challenges due to its environmental impact. The threat of Cr(VI) causes critical concerns in aquatic ecosystems as a consequence of the fluidity of water. The conventional approach for the treatment of effluents containing Cr(VI) is reducing Cr(VI) to low-noxious Cr(III). This research is related to a Gram positive bacterium newly isolated from tannery effluent under aerobic conditions. To characterize functional groups on the isolate, Fourier transform infrared spectroscopy was utilized. The effect of different factors on Cr(VI) bioreduction was investigated, including temperature, initial Cr(VI) concentration, acetate concentration, and Tween 80 surfactant. Under optimal conditions (37 °C and 0.90 g/L sodium acetate), the bioreduction rate of the isolate, identified as Lactococcus lactis AM99, achieved 88.0 % at 300 mg/L Cr(VI) during 72 h (p < 0.05). It was observed that Cr(VI) bioreduction was enhanced by the acetate in both the quantity and intensity, while Tween 80 had no impact on the reaction. The strain AM99 exhibited remarkable characteristics, notably a marginal decrease in growth at elevated concentrations of hexavalent chromium and an exceptional potential to reduce Cr(VI) even at very low biomass levels, surpassing any prior findings in the associated research. Furthermore, The isolate could tolerate 1400 mg/L Cr(VI) in a solid medium. These distinctive features make the isolate a promising and well-suited candidate for remediating Cr(VI)-polluted environments. Additionally, the impact of biogenic extracellular polymer produced by the strain AM99 on reduction was examined at different temperatures.

Reduction and precipitation of chromium(VI) using a palladized membrane biofilm reactor

H2-driven reduction of hexavalent chromium (Cr(VI)) using precious-metal catalysts is promising, but its implementation in water treatment has been restricted by poor H2-transfer efficiency and high catalyst loss. We investigated the reduction of Cr(VI) through hydrogenation catalyzed by elemental-palladium nanoparticles (PdNPs) generated in-situ within biofilm of a membrane biofilm reactor (MBfR), creating a Pd-MBfR. Experiments were conducted using a Pd-MBfR and a non-Pd MBfR. The Pd-MBfR achieved Cr(VI) (1000 μg L-1) reduction of >99 % and reduced the concentration of total Cr to below 50 μg L-1, much lower than the total Cr concentration in the non-Pd MBfR effluent (290 μg L-1). The Pd-MBfR also had a lower concentration of dissolved organic compounds compared to the non-Pd MBfR, which minimized the formation of soluble organo-Cr(III) complexes and promoted precipitation of Cr(OH)3. Solid-state characterizations documented deposition of Cr(OH)3 as the product of Cr(VI) reduction in the Pd-MBfR. Metagenomic analyses revealed that the addition and reduction of Cr(VI) had minimal impact on the microbial community (dominated by Dechloromonas) and functional genes in the biofilm of the Pd-MBfR, since the PdNP-catalyzed reduction process was rapid. This study documented efficient Cr(VI) reduction and precipitation of Cr(OH)3 by the Pd-MBfR technology.

Mechanism of Cr(VI) bioreduction by Clostridium sp. LQ25 under Fe(III) reducing conditions

The Cr(VI) bioreduction has attracted widespread attention in the field of Cr(VI) pollution remediation due to its environmental friendliness. Further in-depth research on the reduction mechanisms is necessary to enhance the efficiency of Cr(VI) bioreduction. However, the limited research on Cr(VI) bioreduction mechanisms remains a bottleneck for the practical application of Cr(VI) reduction. In this study, The Cr(VI) reduction of strain LQ25 was significantly improved when Fe(III) was used as an electron acceptor, which increased by 1.6-fold maximum within the set Cr(VI) concentration range. Based on this, the electron transfer process of Cr(VI) reduction was analyzed using strain LQ25. Based on genomic data, flavin proteins were found to interact closely with electron transfer-related proteins using protein-protein interaction (PPi) analysis. Transcriptome analysis revealed that flavin synthesis genes (ribE, ribBA, and ribH) and electron transfer flavoprotein genes (fixA, etfA, fixB, and etfB) were significantly upregulated when Fe(III) was used as the electron acceptor. These results indicate that the fermentative dissimilatory Fe(III)-reducing bacterial strain LQ25 mainly uses flavin as an electron shuttle for electron transfer, which differs from the common use of cytochrome c in respiratory bacteria. These findings on the mechanism of Cr(VI) bioreduction provide technical support for improving the efficiency of Cr(VI) reduction which promote the practical application of Cr(VI) bioreduction in the field of Cr(VI) pollution remediation.

Ultrafast removal of toxic Cr(VI) by the marine bacterium Vibrio natriegens

The fastest-growing microbe Vibrio natriegens is an excellent platform for bioproduction processes. Until now, this marine bacterium has not been examined for bioremediation applications, where the production of substantial amounts of biomass would be beneficial. V. natriegens can perform extracellular electron transfer (EET) to Fe(III) via a single porin-cytochrome circuit conserved in Vibrionaceae. Electroactive microbes capable of EET to Fe(III) usually also reduce toxic metals such as carcinogenic Cr(VI), which is converted to Cr(III), thus decreasing its toxicity and mobility. Here, the performance of V. natriegens was explored for the bioremediation of Cr(VI). At a density of 100 mg/mL, V. natriegens removed 5-20 mg/L Cr(VI) within 30 s and 100 mg/L Cr(VI) within 10 min. In comparison, the model bacterium Escherichia coli grown to a comparable cell density removed Cr(VI) 36 times slower. To eliminate Cr(VI), V. natriegens had to be metabolically active, and functional outer-membrane c-type cytochromes were required. At the end of the Cr(VI) removal process, V. natriegens had reduced all of it into Cr(III) while adsorbing more than half of the metallic ions. These results demonstrate that V. natriegens, with its fast metabolism, is a viable option for the rapid treatment of aqueous pollution with Cr.

Recent breakthroughs on the development of electrodeionization systems for toxic pollutants removal from water environment

Since ecosystems are becoming inherently polluted, long-term contaminant removal methods are required. Electrodeionization, in particular, has recently been demonstrated as an effective approach for eliminating ionic compounds from contaminated water sources. Being a more environmentally friendly technology is most likely the main reason for its eminence. It uses electricity to replace toxic contaminants that are conventionally used to regenerate and hence reducing the toxins associated with resin regeneration. In wastewater treatment, continuous electrodeionization system overcomes several limitations of ion exchange resins, notably ion dumping. This prospective assessment delves into the mechanism, principle, and theory of electrodeionization system. It also focused on the design and applications, particularly in the removal of toxic compounds, as well as current advances in the electrodeionization system. Recent breakthroughs in electrodeionization were comprehensively discussed. Further developments in electrodeionization systems are also projected, with improved efficiency at the time of functioning at lower costs because of reduced energy use, proving them desirable for commercial usage with a broad array of applications across the globe.

An overview of in situ remediation for groundwater co-contaminated with heavy metals and petroleum hydrocarbons

Groundwater is an important component of water resources. Mixed pollutants comprising heavy metals (HMs) and petroleum hydrocarbons (PHs) from industrial activities can contaminate groundwater through such processes as rainfall infiltration, runoff and discharge, which pose direct threats to human health through the food chain or drinking water. In situ remediation of contaminated groundwater is an important way to improve the quality of a water environment, develop water resources and ensure the safety of drinking water. Bioremediation and permeable reactive barriers (PRBs) were discussed in this paper as they were effective and affordable for in situ remediation of complex contaminated groundwater. In addition, media types, technology combinations and factors for the PRBs were highlighted. Finally, insights and outlooks were presented for in situ remediation technologies for complex groundwater contaminated with HMs and PHs. The selection of an in situ remediation technology should be site specific. The remediation of complex contaminated groundwater can be approached from various perspectives, including the development of economical materials, the production of slow-release and encapsulated materials, and a combination of multiple technologies. This review is expected to provide technical guidance and assistance for in situ remediation of complex contaminated groundwater.

Performance and mechanism of chromium reduction in denitrification biofilm system with different carbon sources

In the process of biological reduction of Cr(VI), the type of carbon sources affects the rate and effect of Cr(VI) reduction, but its specific performance and influencing mechanism have not yet been explored. In this study, four denitrification biofilm reactors were operated under four common carbon sources (C6H12O6, CH3COONa, CH3OH, CH3COONa:C6H12O6 1:1) to reveal the impact of carbon sources on Cr(VI) reduction. Through preliminary experimental concentration research, 75 mg/L Cr(VI) was selected as the dosing concentration. In long-term operation, the composite carbon sources of CH3COONa and C6H12O6 demonstrated excellent stability and achieved an impressive Cr(VI) removal efficiency of 99.5 %. The following sequence was C6H12O6, CH3COONa, and CH3OH. Among them, CH3OH was less competitive and the system was severely unbalanced with lowest Cr(VI) reduction efficiency. The toxicity reactions, changes in EPS and its functional groups, and electron transfer revealed the reduction and fixation mechanism of chromium on denitrification biofilm. The changes in microbial communities indicated that microbial communities in composite carbon sources can quickly adapt to the high toxic environment. The proportion of Trichococcus reached 43.6 %, which played an important role in denitrification and Cr(VI) reduction. Meanwhile, the prediction of microbial COG function reflected its excellent metabolic ability and defense mechanism.

Interaction between Cr(VI) and Tubificidae in sludge reduction system: effect, reduction, and redistribution of Cr(VI)

The treatment of heavy metals in sewage treatment systems has gained more attention with the increase in heavy metal hazards. Tubificidae in sludge reduction have been widely studied; however, little is known about the effect of Tubificidae in the treatment of Cr-containing wastewater. In this study, the mechanism of Tubificidae in the sludge reduction system with Cr stress was studied. Predation experiments by Tubificidae in a Cr-containing sludge reduction system were conducted to investigate the changes in enzyme activities in the Tubificidae under different concentrations of Cr, and the distribution of Cr in the sludge reduction reactor was analyzed. The kinetic model of uptake and elimination of Cr in Tubificidae was established. The results showed that the maximum activation multiplier factor of superoxide dismutase (SOD) activity was 1.95 under the low concentration of Cr(VI), which indicated that Tubificidae had a certain detoxification. After the effect of Tubificidae on Cr(VI) experiments, the Cr concentrations in Tubificidae, sludge, and feces increased first and then decreased with exposure time, and the proportion of total Cr and Cr(VI) in the sludge decreased from 71.98% and 42.7% to 29.18% and 6.82%, respectively. The detoxification mechanism of the Tubificidae could be activated with Cr stress, and 63.22% of the Cr(VI) was converted to Cr(III). The bioconcentration factor (BCF) for theoretical equilibrium was 446, the maximum bioaccumulation factor (BAF) reached 0.97 on the 15th day. It can be seen that Tubificidae could be considered a good scavenger of environmental Cr(VI). The hyperbolic model fits the process of Cr uptake and elimination well and can be used as a predictive tool for Tubificidae accumulation.

Removal of Cr (VI) and microbial community analysis in PCB wastewater treatment based on the BESI® process

The treatment efficiency of Chromium (Cr)-containing Printed Circuit Board (PCB) wastewater is significantly hampered by the limited physiological activity of microorganisms when activated sludge is applied. In this study, the biodegradation and electron transfer based on sulfur metabolism in the integrated (BESI®) process use sulfur as the electron acceptor to achieve sulfate reduction and sulfide oxidation, leading to efficient removal of Cr. The concentrations of total Cr and Cr(VI) in the effluent were reduced to 0.5 mg/L and 0.1 mg/L, respectively, from an initial range of 25-32 mg/L in the influent. The removal of Cr (ΔC(Cr(VI))) mainly occurred in the Sulfate Reduction (SR) reactor, which was significantly correlated with the generation of sulphide ([Formula: see text]) (R2 = 0.9987). Meantime, analysis of the microbial community showed that Cr (VI) stress increased the diversity of the bacterial community in sludge. The presence of Clostridium (52.54% and 47.78%) in SR & Sulfide Oxidation (SO) reactor, along with the Synergistaceae (31.90%) and Trichococcus (26.59%) in aerobic reactor, might contribute to the gradient degradation of COD, resulting in a removal efficiency exceeding 80% when treating an influent with a concentration of 1000 mg/L. In addition, the main precipitation components in the SR reactor were identified by scanning electron microscope, indicating that Cr has been removed from wastewater as Cr(OH)3 precipitation. This study sheds light on the potential of using the BESI® process for the real PCB wastewater treatment.

Bioreduction and mineralization of Cr(VI) by Sporosarcina saromensis W5 induced carbonate precipitation

The microbial reduction of Cr(VI) to Cr(III) is widely applied, but most studies ignored the stability of reduction products. In this study, the Cr(VI)-reducing bacterium of Sporosarcina saromensis combined with microbially induced carbonate precipitation (MICP) was used to explore the reduction and mineralization mechanisms of Cr(VI). The results indicated that the high concentration of Ca2+ could significantly enhance the reduction and mineralization of Cr(VI). The highest reduction and mineralization efficiencies of 99.5% and 55.9% were achieved at 4 g/L Ca2+. Moreover, the urease activity of S. saromensis in the experimental group was up to 13.28 U/mg NH3-N. Besides, the characteristic results revealed that Cr(VI) and reduced Cr(III) were absorbed on the surface or got into the interspace of CaCO3, which produced a new stable phase (Ca10Cr6O24(CO3)). Overall, the combination of S. saromensis and MICP technology might be a high-efficiency and environmentally friendly strategy for further application in the Cr(VI)-containing groundwater.

Hexavalent chromium detoxification by haloalkaliphilic Nesterenkonia sp strain NRC-Y immobilized in different matrices.. [DOI: 10.21203/rs.3.rs-2870155/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In order to develop a bioprocess for Cr(VI) detoxification in industrial effluent, a previously isolated potent Cr(VI) reducing haloalkaliphilic Nesterenkonia sp strain NRC-Y was immobilized in nine different matrices including natural polymer, modified natural, synthetic and mixtures of natural and synthetic polymers and investigated for Cr(VI) detoxification. Among the tested carriers and immobilization approaches, Nesterenkonia sp NRC-Y cells encapsulated in amidated pectin beads showed highest Cr(VI) reduction efficiency (58.4% of initial Cr(VI) concentration 150 mg/L after 20 h), followed by alginate, alginate-PVA, alginate-PVA-chitosan, PVA-PVP, and PVA respectively. Therefore, amidated pectin was selected for further investigation and immobilization of both whole cells and chromate reductase. Operational stability study revealed that immobilized whole cell was more efficient and stable than immobilized chromate reductase and the free cells retaining about 60%, 27.0% and 11.5% of its initial activity after four successive batches, respectively. The temperature and pH optima for the immobilized cells were 35⸰C and 7.0, respectively. The pH and thermal stability of Nesterenkonia sp NRC-Y cells were significantly enhanced upon immobilization in amidated pectin beads. The developed immobilized biocatalyst was applied for Cr(VI) reduction in industrial effluent samples, and was able to completely reduce Cr(VI) within 4 and 8 h for effluents for initial Cr(VI) concentrations of 10 and 30 mg/L, respectively. To the best of our knowledge, this is the first report about of Cr(VI) detoxification by immobilized Nesterenkonia sp NRC-Y in amidated pectin beads. The developed immobilized biocatalyst is promising and has the potential for large-scale Cr(VI) detoxification application.

A review on the clean-up technologies for heavy metal ions contaminated soil samples

The soil contamination with heavy metal ions is one of the grave intricacies faced worldwide over the last few decades by the virtue of rapid industrialization, human negligence and greed. Heavy metal ions are quite toxic even at low concentration a swell as non-biodegradable in nature. Their bioaccumulation in the human body leads to several chronic and persistent diseases such as lung cancer, nervous system break down, respiratory problems and renal damage etc. In addition to this, the increased concentration of these metal ions in soil, beyond the permissible limits, makes the soil unfit for further agricultural use. Hence it is our necessity, to monitor the concentration of these metal ions in the soil and water bodies and adopt some better technologies to eradicate them fully. From the literature survey, it was observed that three main types of techniques viz. physical, chemical, and biological were employed to harness the heavy metal ions from metal-polluted soil samples. The main goal of these techniques was the complete removal of the metal ions or the transformation of them into less hazardous and toxic forms. Further the selection of the remediation technology depends upon different factors such as process feasibility/mechanism of the process applied, nature and type of contaminants, type and content of the soil, etc. In this review article, we have studied in detail all the three technologies viz. physical, chemical and biological with their sub-parts, mechanism, pictures, advantages and disadvantages.

Hexavalent chromate bioreduction by a magnetotactic bacterium Magnetospirillum gryphiswaldense MSR-1 and the effect of magnetosome synthesis

Magnetotactic bacteria (MTB) are receiving attention for heavy metal biotreatment due to their potential for biosorption with heavy metals and the capability of the magnetic recovery. In this study, we investigated the characteristics of Cr(VI) bioreduction and biosorption by an MTB isolate, Magnetospirillum gryphiswaldense MSR-1, which has a higher growth rate and wider reflexivity in culture conditions. Our results demonstrated that the MSR-1 strain could remove Cr(VI) up to the concentration of 40 mg L^-1 and with an optimal activity at neutral pH conditions. The magnetosome synthesis existed regulatory mechanisms between Cr(VI) reduction and cell division. The addition of 10 mg L^-1 Cr(VI) significantly inhibited cell growth, but the magnetosome-deficient strain, B17316, showed an average specific growth rate of 0.062 h^-1 at the same dosage. Cr(VI) reduction examined by the heat-inactivated and resting cells demonstrated that the main mechanism for MSR-1 strain to reduce Cr(VI) was chromate reductase and adsorption, and magnetosome synthesis would enhance the chromate reductase activity. Finally, our results elucidated that the chromate reductase distributes diversely in multiple subcellular components of the MSR-1 cells, including extracellular, membrane-associated, and intracellular cytoplasmic activity; and expression of the membrane-associated chromate reductase was increased after the cells were pre-exposed by Cr(VI).

The Impact of Heavy Metal Accumulation on Some Physiological Parameters in Silphium perfoliatum L. Plants Grown in Hydroponic Systems

Heavy metals like cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn), resulting from anthropogenic activities, are elements with high persistence in nature, being able to accumulate in soils, water, and plants with significant impact to human and animal health. This study investigates the phytoremediation capacity of Silphium perfoliatum L. as a specific heavy metal hyperaccumulator and the effects of Cu, Zn, Cd, and Pb on some physiological and biochemical indices by growing plants under floating hydroponic systems in nutrient solutions under the presence of heavy metals. One-year-old plants of S. perfoliatum grown for 20 days in Hoagland solution with the addition of (ppm) Cu-400, Zn-1200, Cd-20, Pb-400, and Cu+Zn+Cd+Pb (400/1200/20/400) were investigated with respect to the control. The level of phytoremediation, manifested by the ability of heavy metal absorption and accumulation, was assessed. In addition, the impact of stress on the proline content, photosynthetic pigments, and enzymatic activity, as being key components of metabolism, was determined. The obtained results revealed a good absorption and selective accumulation capacity of S. perfoliatum plants for the studied heavy metals. Therefore, Cu and Zn mainly accumulate in the stems, Cd in the roots and stems, while Pb mainly accumulates in the roots. The proline tended to increase under stress conditions, depending on the pollutant and its concentration, with higher values in leaves and stems under the associated stress of the four metals and individually for Pb and Cd. In addition, the enzymatic activity recorded different values depending on the plant organ, its type, and the metal concentration on its substrate. The obtained results indicate a strong correlation between the metal type, concentration, and the mechanisms of absorption/accumulation of S. perfoliatum species, as well as the specific reactions of metabolic response.

Soil Chromium Accumulation in Industrial Regions across China: Pollution and Health Risk Assessment, Spatial Pattern, and Temporal Trend (2002-2021)

This study conducted a nationwide specific assessment of soil chromium (Cr) contamination status in 506 of China's industrial regions. The overall soil Cr concentrations were 0.74-37,967.33 mg/kg, and the soil Cr content in 4.15% of the regions exceeded the reference screening value (2500 mg/kg). Geochemical accumulation index (I_geo) and monomial potential ecological risk index (E) revealed Cr salt production and tanning were the primary control industries. The non-carcinogenic risks posed by Cr salt production and tanning industries were higher than the national average values, and children were the most vulnerable groups. The heavily polluted regions were mainly located at the Yangtze River Delta, the Bohai Rim, the Pearl River Delta, the Yangtze River Basin, and the Yellow River Basin. The Yangtze River Delta was further identified as the high priority control area based on the class distribution of I_geo and E. Regression analysis showed the soil Cr concentrations in industrial regions increased during 2002-2009 and then turned into a declining trend in 2009-2021. This paper gives detailed insights into soil Cr pollution status in industrial regions across China and the results may serve as references for formulating tailored control measures for different industries and areas.

Insight to chromium homeostasis for combating chromium contamination of soil: Phytoaccumulators-based approach

Chromium (Cr) is a naturally occurring, carcinogenic heavy metal that has become a pressing concern in recent decades for environmentalists. Due to high anthropogenic activities, the concentration of Cr has crossed the environmental threshold levels and consequently contaminated soil and water. The high solubility of Cr ions in the groundwater results in its high uptake by the plants leading to phytotoxicity and yield loss. The dearth of efficient and cost-effective treatment methods has resulted in massive chromium pollution. However, some phytoaccumulators capable of accumulating Cr in high amounts in their shoots and then performing their metabolic activity typically have been identified. Chromium bioremediation using phytoaccumulators is very contemplative due to its eco-friendly and cost-effective outcome. These accumulators possess several mechanisms, such as biosorption, reduction, efflux, or bioaccumulation, naturally or acquired to counter the toxicity of chromium. This review focuses on the detoxification mechanism of Cr by the phytoaccumulator species, their responses against Cr toxicity, and the scope for their application in bioremediation. Besides, Cr bioavailability, uptake, distribution, impairment of redox homeostasis, oxidative stress, and phytotoxicity imposed on the plants are also summarized. Further, the knowledge gap and prospects are also discussed to fill these gaps and overcome the problem associated with the real-time applicability of phytoaccumulator-based bioremediation.

Preliminary assessment of microbial mats in seawater metal remediation

Microbial mats have a special role in the removal of metals in marine environment. This study aimed to experimentally determine the efficiency of Cr removal from seawater by microbial mats. The effect of Cr on the microphytobenthic community and the influence of an aerated condition on the removal of metal and microorganisms were also considered. Hence, microbial mat samples were subdivided in 4 groups: submerged in Cr (chromium 2 mg/L without aeration), Cr + O₂ (chromium 2 mg/L with aeration), SW + O₂ (filtered seawater with aeration), and a control: SW (filtered seawater with neither chromium nor aeration). Water and microbial mat subsamples were used to determine Cr concentrations, organic matter content, granulometry, physicochemical parameters, chlorophyll a, phaeopigments, and quantitative analysis of the microphytobenthic community. Cr removal efficiency from seawater was 95% for the Cr treatment and 99% for the Cr + O₂ treatment. The abundance of cyanobacteria tended to decrease between the initial and final days of the assay, whereas the opposite trend was observed for diatoms. Two aspects are worth noting in the paper: microbial mats efficiently removed Cr from seawater at a concentration of 2 mg Cr/L and the removal of Cr by microbial mats was more efficient with water aeration.

A Comprehensive Review of the Current Progress of Chromium Removal Methods from Aqueous Solution

Chromium (Cr) exists in aqueous solution as trivalent (Cr³⁺) and hexavalent (Cr⁶⁺) forms. Cr³⁺ is an essential trace element while Cr⁶⁺ is a dangerous and carcinogenic element, which is of great concern globally due to its extensive applications in various industrial processes such as textiles, manufacturing of inks, dyes, paints, and pigments, electroplating, stainless steel, leather, tanning, and wood preservation, among others. Cr³⁺ in wastewater can be transformed into Cr⁶⁺ when it enters the environment. Therefore, research on Cr remediation from water has attracted much attention recently. A number of methods such as adsorption, electrochemical treatment, physico-chemical methods, biological removal, and membrane filtration have been devised for efficient Cr removal from water. This review comprehensively demonstrated the Cr removal technologies in the literature to date. The advantages and disadvantages of Cr removal methods were also described. Future research directions are suggested and provide the application of adsorbents for Cr removal from waters.

Synthesis of triethylenetetramine modified sodium alginate/CuS nanocrystal composite for enhanced Cr(VI) removal: Performance and mechanism

Photocatalysis has been widely used for the removal of hexavalent chromium from wastewater as an efficient and environmental friendly method. However, conventional photocatalysts generally exhibit poor adsorption properties toward Cr(VI), resulting in unsatisfactory performance in high concentrated wastewaters. In this study, we synthesized a novel composite material with high Cr(VI) adsorption ability by blending prepared CuS nanocrystals into triethylenetetramine modified sodium alginate for the enhanced photocatalytic removal of Cr(VI). Effect of CuS dosage, pH value, light source and intensity were discussed for the optimum Cr(VI) removal conditions. The synthesized composite has shown good adsorption performance toward Cr(VI) and the overall removal rate reached 98.99 % within 50 min under UV light irradiation with citric acid as hole scavenger. Adsorption isotherm, thermodynamics, and kinetics with corresponding model fitting were discussed, which suggested that the monolayer and chemical adsorption dominated the adsorption process. Characterization results indicated that amino and hydroxyl groups contributed electrons in the photocatalysis reaction for the reduction of Cr(VI) to Cr(III). CuS nanocrystals can enhance the surface charge and light absorbance ability of the composite, and the Cr(VI) removal was governed by electrostatic interaction and photo-induced redox reaction.

Metabolic pathway of Cr(VI) reduction by bacteria: A review

Heavy metal wastes, particularly hexavalent chromium [Cr(VI)], are generated from anthropogenic activities, and their increasing abundance has been a research concern due to their toxicity, genotoxicity, carcinogenicity and mutagenicity. Exposure to these dangerous pollutants could lead to chronic infections and even mortality in humans and animals. Bioremediation using microorganisms, particularly bacteria, has gained considerable interest because it can remove contaminants naturally and is safe to the surrounding environment. Bacteria, such as Pseudomonas putida and Bacillus subtilis, can reduce the toxic Cr(VI) to the less toxic trivalent chromium Cr(III) through mechanisms including biotransformation, biosorption and bioaccumulation. These mechanisms are mostly linked to chromium reductase and nitroreductase enzymes, which are involved in the Cr(VI) reduction pathway. However, relevant data on the nitroreductase route remain insufficient. Thus, this work proposes an alternative metabolic pathway of nitroreductase, wherein nitrate activates the reaction and indirectly reduces toxic chromium. This nitroreductase pathway occurs concurrently with the chromium reduction pathway.

Application of multi-gene genetic programming technique for modeling and optimization of phycoremediation of Cr(VI) from wastewater

Background

Removal of Cr(VI) from wastewater is essential as it is potentially toxic and carcinogenic in nature. Bioremediation of heavy metals using microalgae is a novel technique and has several advantages such as microalgae remove metals in an environmentally friendly and economic manner. The present study deals with modeling and optimization of the phycoremediation of Cr(VI) from synthetic wastewater. The initial concentration of Cr(VI), initial pH, and inoculum size were considered as input factors, and the percentage removal of Cr(VI) was chosen as a response.

Results

An accurate data-driven genetic programming model was developed with the experimental data of other scientists to find a relation between the percentage removal of Cr(VI) and all input parameters. To maximize the removal of Cr(VI), the grey wolf optimization technique was applied to determine the optimal values of input parameters.

Conclusion

These optimum input parameters are difficult to get through experimentation using the trial-and-error method. The established modelling and optimization technique is generic and can be applied to any other experimental study.

Graphical Abstract

A review on algal biosorbents for heavy metal remediation with different adsorption isotherm models

Biosorbent composites like chitin, alginate, moss, xanthene, and cotton can be derived from biotic species such as plants, algae, fungi, and bacteria which can be used for the exclusion of both organic and inorganic toxicants from sewage, industrial effluent, polluted soils, and many more. The use of composites in place of raw substrates like alginate and chitin increases the adsorption capacity as CS₄CPL₁ beads increase the adsorption capacity for copper and nickel from 66.7 mg/g and 15.3 mg/g in the case of alginate microsphere to 719.38 mg/g and 466.07 mg/g respectively. Biosorbent fabricated from algae Chlorella vulgaris having surface area of 12.1 m²/g and pore size of 13.7 nm owing to which it displayed a higher adsorption capacity for Pb 0.433 mmol/g indicating their potential as an efficient biosorbent material. This article contains detailed information related to heavy metals as well as biosorbent that includes different isotherms, kinetics, techniques to estimate heavy metal concentration, removal methods, and adverse health effects caused due to heavy metal pollution. Apart from the above recovery and reuse of biosorbent, correlation with the sustainable development goals has also been included.

Biogenic carbon encapsulated iron oxides mediated oxalic acid for Cr(VI) reduction in aqueous: Efficient performance, electron transfer and radical mechanisms

Carbonaceous materials have a potential to mediated oxalic acid (OA) for Cr(VI) reduction, but the rational modification is needed for boosting the mediation of electron transfer. Herein, we utilized polyvinyl alcohol to envelop schwertmannite synthesized by Acidithiobacillus ferrooxidans biomineralization, and pyrolyzed them to obtain the carbon encapsulated iron oxides (C-2.0-Sch-PVA). SEM and TEM results demonstrated that a moderate calcination temperature would yield a neural network-like carbon encapsulated structure. C-2.0-Sch-PVA efficiently mediated OA to reduce Cr(VI), 98.4% of Cr(VI) (40 mg L^-1) was reduced with 0.75 g L^-1 C-2.0-Sch-PVA and 4 mM OA in 60 min. It still performed excellent results in a wide pH range, multiple anions and different water matrixes. The carbon encapsulated structure as electron shuttle mediated the electron transfer, and the O-moieties on its surface were a premise for initiating the Cr(VI) reduction process. The electron transfer from the inner iron oxides to the conjugated structure of the outer carbon shells facilitated Cr(VI) reduction as well. Moreover, OA raised the persistent free radicals' level in C-2.0-Sch-PVA as another important pathway for Cr(VI) reduction. Overall, C-2.0-Sch-PVA provides an excellent demonstration in the carbonaceous materials modification for mediating OA to reduce Cr(VI) in aqueous.

Sustainable metal-free leather manufacture via synergistic effects of triazine derivative and vegetable tannins

Restrictions on heavy metals, especially chromium, have encouraged alternative tanning systems that can reduce environmental and human health risks from conventional chrome-based tanning. In this work, metal-free combination tanning was developed by using vegetable tannins and a triazine-based syntan containing active chlorine groups (SACC). Specifically, the relationship between leather performance (e.g., hydrothermal stability and organoleptic properties) and technical protocols (e.g., types and dose of tannins) was systematically established. The optimized protocol involving a unique procedure (i.e., 10% SACC pre-tanning, shaving, and 25% wattle tanning) endowed the leather with high shrinkage temperature (~ 92 °C) and met the Chinese standards for shoe upper leather (QB/T 1873-2010). Our method not only produces zero chrome-containing solid wastes, but also uses ~ 75% less tannin for leather manufacture. The excellent leather performance was ascribed to the synergistic effects, where SACC and wattle diffused into collagen fibrils and may bind to collagen via covalent, hydrogen and ionic bonding, locking the hierarchical structure of collagen from microfibrils to fiber bundles. Moreover, we summarized these findings and proposed a diffusion-binding-locking mechanism, providing new insights for current tanning theory. Together with the biodegradable spent tanning liquor, this approach will underpin the development of sustainable leather manufacture.

Graphical Abstract

Cr(VI) removal from contaminated waters using ultra-thin layered meixnerite

Cr(VI) is of great concern to public health and environmental safety due to its high toxicity. Here, we report a low-cost yet highly efficient method to prepare a novel LDH, ultra-thin layered meixnerite, which performed superiorly in treatment of aqueous Cr(VI) with little secondary pollution being induced. The produced ultra-thin layered meixnerite was composed of nanoparticles with a thickness of around 7 nm, less than 9 times the thickness of a single LDH layer. The XRD patterns of the ultra-thin layered meixnerite, in which the characteristic diffraction peaks of a typical LDH were weakened or even disappeared, confirmed the successful delamination. This special morphology of the ultra-thin layered meixnerite was not only helpful to its full dispersion in the Cr(VI)-bearing solutions but also facilitated the formation of more active sorption sites on its external surface. As a result, the maximum sorption capacity of UTLM for Cr(VI) removal was 480.9 mg g^-1, far higher than that of OM (196.9 mg g^-1). In addition to electrostatic attraction and anion exchange, the ultra-thin layered meixnerite could also become restacked during removal of aqueous Cr(VI) to generate inner-sphere complexation, finally inducing an enhanced Cr(VI) uptake. Furthermore, XPS analysis characterized the promotion of the break of Al-OH bond with the increase in temperature, and the Cr-O peak increased correspondingly from 29.69% at 25 °C to 48.77% at 85 °C, resulting that the ultra-thin layered meixnerite could remove Cr(VI) more effectively at higher reaction temperatures. Therefore, ultra-thin layered meixnerite is very suitable for future application in treatment of industrial wastewaters with elevated temperatures.

Adsorption Characteristics of Indigenous Chromium-Resistant Aspergillus niger Strain Isolated from Red Soil for Remediation of Toxic Chromium in Red Soil Environments

The microbial treatment of soil has great potential to reduce chromium pollution. Here, an indigenous chromium-resistant Aspergillus niger strain (A1) was isolated and screened from heavily chromium-contaminated red soil in Yunnan Province, China using a traditional isolation method and a selective culture experiment. The molecular identification of A1 was achieved using 18S rRNA sequencing. The tolerance of the strain to toxic chromium was evaluated through pure laboratory culture. The adsorption effect and mechanism of A1 on chromium in red soil were further studied. The study concluded that A1 exhibited strong activity with exposure to 500 mg·L^-1 Cr⁶⁺. Chromium adsorption by A. niger occurred mainly through intracellular metabolism, surface complexations with EPS, and chemical reduction with -C=C-, -OXuH, NH₂, and -C=0. The optimized results showed that A1 had the best Cr⁶⁺ removal effect at pH 4, 40 °C, and a 60 h culture time. Compared with the inoculating of exogenous microbial agents, after inoculating A1 into the chromium-contaminated red soil, Cr⁶⁺ content was significantly reduced, and the high-toxicity chromium state (water-soluble and exchange states) decreased, whereas the low-toxicity chromium state (precipitation and residue states) increased. The results of red soil ITS also showed that the inoculation of indigenous microorganisms can better colonize the red soil. This study proves the feasibility of the application of indigenous A. niger to address red soil chromium pollution and provides a new idea and theoretical support for red soil remediation.

Removal of Pb2+, CrT, and Hg2+ Ions from Aqueous Solutions Using Amino-Functionalized Magnetic Nanoparticles

In this paper, a circular economy approach with the adsorption and desorption of heavy metal (HM) ions—i.e., lead (Pb2+), chromium (CrT), and mercury (Hg2+)—from aqueous solutions was studied. Specific and selective binding of HM ions was performed on stabilized and amino-functionalized iron oxide magnetic nanoparticles (γ-Fe2O3@NH2 NPs) from an aqueous solution at pH 4 and 7. For this purpose, γ-Fe2O3@NH2 NPs were characterized by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), specific surface area (BET), transmission electron microscopy (TEM), EDXS, and zeta potential measurements (ζ). The effects of different adsorbent amounts (mads = 20/45/90 mg) and the type of anions (NO3−, Cl−, SO42−) on adsorption efficiency were also tested. The desorption was performed with 0.1 M HNO3. The results showed improvement of adsorption efficiency for CrT, Pb2+, and Hg2+ ions at pH 7 by 45 mg of g-Fe2O3@NH2 NPs, and the sequence was as follows: CrT > Hg2+ > Pb2+, with adsorption capacities of 90.4 mg/g, 85.6 mg/g, and 83.6 mg/g, respectively. The desorption results showed the possibility for the reuse of γ-Fe2O3@NH2 NPs with HNO3, as the desorption efficiency was 100% for Hg2+ ions, 96.7% for CrT, and 91.3% for Pb2+.

A critical review on biochar-assisted free radicals mediated redox reactions influencing transformation of potentially toxic metals: Occurrence, formation, and environmental applications

Potentially toxic metals have become a viable threat to the ecosystem due to their carcinogenic nature. Biochar has gained substantial interest due to its redox-mediated processes and redox-active metals. Biochar has the capacity to directly adsorb the pollutants from contaminated environments through several mechanisms such as coprecipitation, complexation, ion exchange, and electrostatic interaction. Biochar's electron-mediating potential may be influenced by the cyclic transition of surface moieties and conjugated carbon structures. Thus, pyrolysis configuration, biomass material, retention time, oxygen flow, and heating time also affect biochar's redox properties. Generally, reactive oxygen species (ROS) exist as free radicals (FRs) in radical and non-radical forms, i.e., hydroxyl radical, superoxide, nitric oxide, hydrogen peroxide, and singlet oxygen. Heavy metals are involved in the production of FRs during redox-mediated reactions, which may contribute to ROS formation. This review aims to critically evaluate the redox-mediated characteristics of biochar produced from various biomass feedstocks under different pyrolysis conditions. In addition, we assessed the impact of biochar-assisted FRs redox-mediated processes on heavy metal immobilization and mobility. We also revealed new insights into the function of FRs in biochar and its potential uses for environment-friendly remediation and reducing the dependency on fossil-based materials, utilizing local residual biomass as a raw material in terms of sustainability.

Chromium in plant-soil nexus: Speciation, uptake, transport and sustainable remediation techniques

Heavy metal (HM) pollution has become a serious global problem due to the non-biodegradable nature of the HMs and their persistence in the environment. Agricultural soil is a non-renewable resource that requires careful management so that it can fulfill the increasing demand for agricultural food production. However, different anthropogenic activities have resulted in a large-scale accumulation of HMs in soil which is detrimental to soil and plant health. Due to their ubiquity, increased bioavailability, toxicity, and non-biodegradable nature, HM contamination has formed a roadblock in the way of achieving food security, safety, and sustainability in the future. Chromium (Cr), specifically Cr(VI) is a highly bioavailable HM with no proven role in the physiology of plants. Chromium has been found to be highly toxic to plants, with its toxicity also influenced by chemical speciation, which is in turn controlled by different factors, such as soil pH, redox potential, organic matter, and microbial population. In this review, the different factors that influence Cr speciation were analyzed and the relationship between biogeochemical transformations of Cr and its bioavailability which may be beneficial for devising different Cr remediation strategies has been discussed. Also, the uptake and transport mechanism of Cr in plants, with particular reference to sulfate and phosphate transporters has been presented. The biological solutions for the remediation of Cr contaminated sites which offer safe and viable alternatives to old-style physical and chemical remediation strategies have been discussed in detail. This review provides theoretical guidance in developing suitable approaches for the better management of these remediation strategies.

Reduction of hexavalent chromium using bacterial isolates and a microbial community enriched from tannery effluent

We investigated microbial growth in increasing concentrations of hexavalent chromium (Cr(VI)) and its reduction by a microbial community enriched from tannery effluent and by the bacterial strains isolated from the enriched community. The bacterial growth was monitored by measuring the optical cell density (OD₆₅₀), while the Cr(VI) concentration in the samples was determined using spectrophotometry and liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). At a Cr(VI) concentration of 100 mg/L, the isolates affiliated with Pseudomonas aeruginosa (P. aeruginosa) reached higher optical cell densities, but were in general less effective for Cr(VI) reduction than the isolates affiliated with Mammaliicoccus sciuri (M. sciuri). All three M. sciuri isolates and only one of the seven P. aeruginosa isolates were able to reduce 50% of the Cr(VI) with an initial concentration of 100 mg/L within 24 h (pH 7.1), while the six isolates affiliated with P. aeruginosa were less effective. Compared to the isolated, individual bacterial strains, the enriched microbial community was better adapted to the elevated Cr(VI) concentrations, but needed a longer time (48 h) to reduce the Cr(VI) with the same efficacy as the most efficient individual isolates. The ability of the enriched microbial community and the isolated bacterial strains to reduce the Cr(VI) highlights their potential for use in the rapid bioremediation of wastewaters contaminated with Cr(VI).

Distribution of Chromium Species and Physico-Chemical Analysis of Various Industrial Effluents in Hyderabad and Jamshoro, Pakistan

This research aimed to quantify the speciation of chromium in different industrial effluent samples of Hyderabad and Jamshoro, Pakistan. The hexavalent chromium (Cr(VI)) was determined by microsample injection system flame atomic absorption spectroscopy (MIS-FAAS). The total chromium was measured by MIS-FAAS after the oxidation of trivalent chromium (Cr(III)) to hexavalent chromium (Cr(VI)) by Ce(SO4)2 in an acidic medium (0.07 M H2SO4). The content of Cr(III) was measured by the difference method (total chromium – hexavalent chromium). In the effluent samples of textile and fabrics industries, the total Cr was observed 400 to 1600 times higher than the US-EPA and WHO regulatory limit (0.10 mg/L) in the industrial discharge. In the effluent of food and plastic industries, the Cr(VI) was found to be high as compared to the Cr(III), and the Cr(III) was observed high in the effluent samples of chemical as well as textile and fabrics industries. The Cr(VI) was higher than the US-EPA and WHO regulatory limit (0.05 mg/L) in the effluent samples of all selected industries, but the Cr(III) was within the US-EPA and WHO regulatory limit (170 mg/L) in the industrial discharges.

Remediation techniques for elimination of heavy metal pollutants from soil: A review

Contaminated soil containing toxic metals and metalloids is found everywhere globally. As a consequence of adsorption and precipitation reactions, metals are comparatively immobile in subsurface systems. Hence remediation techniques in such contaminated sites have targeted the solid phase sources of metals such as sludges, debris, contaminated soils, or wastes. Over the last three decades, the accumulation of these toxic substances inside the soil has increased dramatically, putting the ecosystem and human health at risk. Pollution of heavy metal have posed severe impacts on human, and it affects the environment in different ways, resulting in industrial anger in many countries. Various procedures, including chemical, biological, physical, and integrated approaches, have been adopted to get rid of this type of pollution. Expenditure, timekeeping, planning challenges, and state-of-the-art gadget involvement are some drawbacks that need to be properly handled. Recently in situ metal immobilization, plant restoration, and biological methods have changed the dynamics and are considered the best solution for removing metals from soil. This review paper critically evaluates and analyzes the numerous approaches for preparing heavy metal-free soil by adopting different soil remediation methods.

Deciphering microbial syntrophic mechanisms for simultaneous removal of nitrate and Cr(VI) by Mn@Corn cob immobilized bioreactor: Performance, enhancement mechanisms and community assembly

When bioremediation is applied to Cr(VI) and NO3--N contaminated groundwater, the lack of carbon sources and weak physiological activity dramatically affect the treatment efficacy. Hence, a bioreactor consisting of cellulose degradation-manganese (Mn) cycling bilayer carrier and two core strains was established. After 270 operating days, the experimental group (EG) achieved 96.34 and 95.37% of NO3--N and Cr(VI) removal efficiency, respectively. When the C/N ratio was reduced to 1.0, cellulose-degrading strain CDZ9 produced significantly hydrolyzed cellulose from the corn cob substrate. Meanwhile, the balance between microbial metabolic activity and carbon supply was manipulated by the dissimilatory Mn-reducing strain MFG10. Dissolved organic matter response in EG provided evidence for enhanced carbon utilization and electron transfer processes. The syntrophic relationship between EG core strains significantly enhanced bioreactor metabolism and bioactivity. It drove the coupling of different elemental cycles with contaminant removal including carbon metabolism, nitrogen metabolism, Mn cycle and Cr(VI) reduction.

Enhancement of hexavalent chromium reduction by Shewanella oneidensis MR-1 in presence of copper nanoparticles via stimulating bacterial extracellular electron transfer and environmental adaptability

The bioreduction of hexavalent chromium (Cr(VI)) depends highly on bacterial activity, while the release of copper nanoparticles (Cu NPs) poses threats to microorganisms in the environment. This work demonstrated that Cr(VI) reduction efficiency of Shewanella oneidensis MR-1 was remarkably enhanced by 83.7% under 20 mg/L Cu NPs exposure. Cu NPs improved the electron migration capacity of Shewanella oneidensis MR-1 by enhancing bioelectrochemical performance and flavin mononucleotide secretion. Moreover, key genes related to extracellular electron transfer pathways, including direct electron transfer through outer-membrane proteins, flavin-mediated electron transfer, and conductive flagella, were generally upregulated under Cu NPs exposure. In addition, environmental adaptability of Shewanella oneidensis MR-1 was enhanced under Cu NPs exposure by improving environmental information processing and energy and reducing power production, promoting Cr(VI) reduction by Shewanella oneidensis MR-1. This work indicated that Cu NPs could enhance Cr(VI) reduction by Shewanella oneidensis MR-1 through regulating extracellular electron transfer and environmental adaptability.

Exploration on the Cr(VI) resistance mechanism of a novel thermophilic Cr(VI)-reducing bacteria Anoxybacillus flavithermus ABF1 isolated from Tengchong geothermal region, China

Hexavalent chromium resistance and reduction mechanisms of microorganism provide a critical guidance for Cr(VI) bioremediation. However, related researches are limited in mesophiles and deficient for thermophiles. In this work, a novel alkaline Cr(VI)-reducing thermophile Anoxybacillus flavithermus ABF1 was isolated from geothermal region. The mechanisms of Cr(VI) resistance and reduction were investigated. The results demonstrated that A. flavithermus ABF1 could survive in a wide temperature range from 50°C to 70°C and in pH range of 7.0-9.0. Strain ABF1 showed excellent growth activity and Cr(VI) removal performance when initial Cr(VI) concentration was lower than 200 mg L^-1 . 93.71% of Cr(VI) was removed at initial concentration of 20 mg L^-1 after 72 h. The majority of Cr(VI) was found to be reduced extracellularly by enzymes secreted by cells. XPS and Raman analysis further manifested that Cr₂ O₃ was the product of Cr(VI) reduction. Moreover, the Cr(VI) transportation-related gene cysP and Cr(VI) reduction-related gene azoR of A. flavithermus ABF1 played key roles in inhibiting Cr(VI) entering cells and promoting extracellular Cr(VI) reduction respectively. This work provides novel insight into the mechanisms of Cr(VI) resistance and detoxication of thermophiles, which leads to a promising alternative strategy for heavy metal bioremediation in areas with elevated temperature.

Interaction of peracetic acid with chromium(III): Understanding degradation of coexisting organic pollutants in water

Peracetic acid (PAA, CH₃C(O)OOH) has gained significant attention for its use in wastewater disinfection. Wastewater usually contains both metal ions and organic pollutants and understanding reactions after adding PAA to such contaminated water is needed. This paper presents results regarding the effect of interactions between chromium(III) (Cr(III)) and PAA on the degradation of selected pharmaceuticals, mainly trimethoprim (TMP). The degradation of pharmaceuticals by PAA, PAA-Cr(III), and H₂O₂-Cr(III) under different conditions was examined (pH = 6.0-10.0 and molar ratios of PAA to Cr(III)). The degradation rate of TMP by PAA-Cr(III) was greater than by PAA and H₂O₂-Cr(III) under alkaline conditions. Degradation studies using quenching agents and probing molecules, and spectroscopic measurements (UV-visible and electron paramagnetic resonance) suggest ^•OH as the major radical species and Cr(IV)/Cr(V) as additional reactive species. The oxidized products of TMP by PAA-Cr(III) were identified and possible pathways proposed. Degradation of other pharmaceuticals having different molecular structures by PAA-Cr(III) and H₂O₂-Cr(III) systems were also investigated. Most of the pharmaceuticals degraded at faster rates by PAA-Cr(III) and H₂O₂-Cr(III) than by PAA alone, suggesting that co-present metal ions may play a significant role in PAA oxidation in water treatment.