Interaction of copper with cysteine: stability of cuprous complexes and catalytic role of cupric ions in anaerobic thiol oxidation

Chaperone-Derived Copper(I)-Binding Peptide Nanofibers Disrupt Copper Homeostasis in Cancer Cells

Copper (Cu) is a transition metal that plays crucial roles in cellular metabolism. Cu+ homeostasis is upregulated in many cancers and contributes to tumorigenesis. However, therapeutic strategies to target Cu+ homeostasis in cancer cells are rarely explored because small molecule Cu+ chelators have poor binding affinity in comparison to the intracellular Cu+ chaperones, enzymes, or ligands. To address this challenge, we introduce a Cu+ chaperone-inspired supramolecular approach to disrupt Cu+ homeostasis in cancer cells that induces programmed cell death. The Nap-FFMTCGGCR peptide self-assembles into nanofibers inside cancer cells with high binding affinity and selectivity for Cu+ due to the presence of the unique MTCGGC motif, which is conserved in intracellular Cu+ chaperones. Nap-FFMTCGGCR exhibits cytotoxicity towards triple negative breast cancer cells (MDA-MB-231), impairs the activity of Cu+ dependent co-chaperone super oxide dismutase1 (SOD1), and induces oxidative stress. In contrast, Nap-FFMTCGGCR has minimal impact on normal HEK 293T cells. Control peptides show that the self-assembly and Cu+ binding must work in synergy to successfully disrupt Cu+ homeostasis. We show that assembly-enhanced affinity for metal ions opens new therapeutic strategies to address disease-relevant metal ion homeostasis.

Bis(amino acidato)copper(II) compounds in blood plasma: a review of computed structural properties and amino acid affinities for Cu2+ informing further pharmacological research

Neutral bis(amino acidato)copper(II) [Cu(aa)2] coordination compounds are the physiological species of copper(II) amino acid compounds in blood plasma taking the form of bis(l-histidinato)copper(II) and mixed ternary copper(II)-l-histidine complexes, preferably with l-glutamine, l-threonine, l-asparagine, and l-cysteine. These amino acids have three functional groups that can bind metal ions: the common α-amino and carboxylate groups and a side-chain polar group. In Cu(aa)2, two coordinating groups per amino acid bind to copper(II) in-plane, while the third group can bind apically, which yields many possibilities for axial and planar bonds, that is, for bidentate and tridentate binding. So far, the experimental studies of physiological Cu(aa)2 compounds in solutions have not specified their complete geometries. This paper provides a brief review of my group's research on structural properties of physiological Cu(aa)2 calculated using the density functional theory (DFT) to locate low-energy conformers that can coexist in aqueous solutions. These DFT investigations have revealed high conformational flexibility of ternary Cu(aa)2 compounds for tridentate or bidentate chelation, which may explain copper(II) exchange reactions in the plasma and inform the development of small multifunctional copper(II)-binding drugs with several possible copper(II)-binding groups. Furthermore, our prediction of metal ion affinities for Cu2+ binding with amino-acid ligands in low-energy conformers with different coordination modes of five physiological Cu(aa)2 in aqueous solution supports the findings of their abundance in human plasma obtained with chemical speciation modelling.

Ala-Cys-Cys-Ala dipeptide dimer alleviates problematic cysteine and cystine levels in media formulations and enhances CHO cell growth and metabolism

Cysteine and cystine are essential amino acids present in mammalian cell cultures. While contributing to biomass synthesis, recombinant protein production, and antioxidant defense mechanisms, cysteine poses a major challenge in media formulations owing to its poor stability and oxidation to cystine, a cysteine dimer. Due to its poor solubility, cystine can cause precipitation of feed media, formation of undesired products, and consequently, reduce cysteine bioavailability. In this study, a highly soluble cysteine containing dipeptide dimer, Ala-Cys-Cys-Ala (ACCA), was evaluated as a suitable alternative to cysteine and cystine in CHO cell cultures. Replacing cysteine and cystine in basal medium with ACCA did not sustain cell growth. However, addition of ACCA at 4 mM and 8 mM to basal medium containing cysteine and cystine boosted cell growth up to 15% and 27% in CHO-GS and CHO-K1 batch cell cultures respectively and led to a proportionate increase in IgG titer. 13C-Metabolic flux analysis revealed that supplementation of ACCA reduced glycolytic fluxes by 20% leading to more efficient glucose metabolism in CHO-K1 cells. In fed-batch cultures, ACCA was able to replace cysteine and cystine in feed medium. Furthermore, supplementation of ACCA at high concentrations in basal medium eliminated the need for any cysteine equivalents in feed medium and increased cell densities and viabilities in fed-batch cultures without any significant impact on IgG charge variants. Taken together, this study demonstrates the potential of ACCA to improve CHO cell growth, productivity, and metabolism while also facilitating the formulation of cysteine- and cystine-free feed media. Such alternatives to cysteine and cystine will pave the way for enhanced biomanufacturing by increasing cell densities in culture and extending the storage of highly concentrated feed media as part of achieving intensified bioproduction processes.

Use of spectroscopic process analytical technology for rapid quality evaluation during preparation of CHO cell culture media

Media preparation parameters contribute significantly to media quality, cell culture performance, productivity, and product quality. Establishing proper media preparation procedures is critical for ensuring a robust CHO cell culture process. Process analytical technology (PAT) enables unique ways to quantify assessments and improve media quality. Here, cell culture media were prepared under a wide range of temperatures (40-80°C) and pH (7.6-10.0). Media quality profiles were compared using three real-time PATs: Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, and excitation-emission matrix (EEM) spectroscopy. FTIR and Raman spectroscopies identified shifts in media quality under high preparation temperature (80°C) and at differing preparation pH which negatively impacted monoclonal antibody (mAb) production. In fed-batch processes for production of three different mAbs, viable cell density (VCD) and cell viability were mostly unaffected under all media preparation temperatures, while titer and cell specific productivity of mAb decreased when cultured in basal and feed media prepared at 80°C. High feed preparation pH alone was tolerated but cell growth and productivity profiles deviated from the control condition. Further, charge variants (main, acidic, basic species) and glycosylation (G0F, afucosylation, and high mannose) were examined. Statistically significant differences were observed for one or more of these quality attributes with any shifts in media preparation. In this study, we demonstrated strong associations between media preparation conditions and cell growth, productivity, and product quality. The rapid evaluation of media by PAT implementation enabled more comprehensive understanding of different parameters on media quality and consequential effects on CHO cell culture.

Late-Stage Fluorination of Tyrosine Residues in Antiviral Protein Cyanovirin-N

The applications of fluorinated molecules in chemical biology are rapidly expanding driven by the unique properties of C-F bonds, leading to increased interest in methodologies for controlled introduction of this atom. In this study, we present the first method for late-stage fluorination of tyrosine residues in proteins. Our results demonstrate that electrophilic fluorination using Selectfluor, a stable and non-toxic reagent, offers a straightforward and cost-effective method for labeling Cyanovirin-N (CVN), a 101-amino-acid lectin with effective antiviral activity. Uni- and bidimensional 1H, 13C and 19F NMR analyses, along with mass spectrometry, revealed chemoselective fluorination of the three tyrosine residues in CVN without affecting its overall structure or mannose-binding affinity. Additionally, we observed that other aromatic amino acids, such as tryptophan, phenylalanine, and histidine, are not fluorinated using this method. These findings advance our understanding of protein fluorination and its applications in studying structure, dynamics, and interactions, as well as other biological utilities.

Remediation of lead toxicity with waste-bio materials from aqueous solutions in fixed-bed column using response surface methodology

Heavy metal ions pose significant risks to human health, pelagic, and several other life forms due to perniciousness, tendency to accumulate, and resistance to biodegradation. Waste bio-materials extend a budding alternative as low-cost adsorbent to address the removal of noxious pollutants from wastewater on account of being cost-effective and exhibiting exceptional adsorption capacities. The current exploration was accomplished to gauge the performance of raw and modified human hair concerning lead scavenging in a down-flow fixed bed column. The appraisal of column performance under varying operational parameters encompassing bed height (15-45 cm), influent metal ion concentration (60-140 mg L-1), and a solution flow rate (20-40 mL min-1) was performed by breakthrough curve analysis. The consequences acquired were evaluated using the Yoon Nelson, Thomas, Adam-Bohart, and Bed Depth Service Time (BDST) model. Among these employed models, Bed Depth Service Time (BDST) and Thomas models exhibited the highest R-squared value compared to the Yoon Nelson and Adam-Bohart's model for most cases. In addition, the optimization of lead adsorption was followed using the Box-Behnken design of response surface methodology (RSM). The optimal conditions (desirability-1.00) for achieving a goal of maximum percent removal of lead ions were marked to be a bed height of 42.79 cm, solution flow rate of 20.92 mL min-1, and an initial metal concentration of 139.51 mg L-1. Under these optimized conditions, the percent amputation of lead in a fixed bed was observed to be 82.31 %, while the results of the experiment performed approximately under these optimized conditions revealed a percent removal of 85.05 %, reflecting a reasonable conformity with values acquired through Box-Behnken design.

The archaeal highly thermostable GH35 family β-galactosidase DaβGal has a unique seven domain protein fold

The most extensively studied β-d-galactosidases (EC3.2.1.23) belonging to four glycoside hydrolase (GH) families 1, 2, 35, and 42 are widely distributed among Bacteria, Archaea and Eukaryotes. Here, we report a novel GH35 family β-galactosidase from the hyperthermophilic Thermoprotei archaeon Desulfurococcus amylolyticus (DaβGal). Unlike fungal monomeric six-domain β-galactosidases, the DaβGal enzyme is a dimer; it has an extra jelly roll domain D7 and three composite domains (D4, D5, and D6) that are formed by the distantly located polypeptide chain regions. The enzyme possesses a high specificity for β-d-galactopyranosides, and its distinguishing feature is the ability to cleave pNP-β-d-fucopyranoside. DaβGal efficiently catalyzes the hydrolysis of lactose at high temperatures, remains stable and active at 65 °С, and retains activity at 95 °С with a half-life time value equal to 73 min. These properties make archaeal DaβGal a more attractive candidate for biotechnology than the widely used fungal β-galactosidases.

Analytical developments in the synergism of copper particles and cysteine: a review

Cysteine, a sulfur-containing amino acid, is a vital candidate for physiology. Coinage metal particles (both clusters and nanoparticles) are highly interesting for their spectacular plasmonic properties. In this case, copper is the most important candidate for its cost-effectiveness and abundance. However, rapid oxidation destroys the stability of copper particles, warranting the necessity of suitable capping agents and experimental conditions. Cysteine can efficiently carry out such a role. On the contrary, cysteine sensing is a vital step for biomedical science. This review article is based on a comparative account of copper particles with cysteine passivation and copper particles for cysteine sensing. For the deep understanding of readers, we discuss nanoparticles and nanoclusters, properties of cysteine, and importance of capping agents, along with various synthetic protocols and applications (sensing and bioimaging) of cysteine-capped copper particles (cysteine-capped copper nanoparticles and cysteine-capped copper nanoclusters). We also include copper nanoparticles and copper nanoclusters for cysteine sensing. As copper is a plasmonic material, fluorometric and colorimetric methods are mostly used for sensing. Real sample analysis for both copper particles with cysteine and copper particles for cysteine sensing are also incorporated in this review to demonstrate their practical applications. Both cysteine-capped copper particles and copper particles for cysteine sensing are the main essence of this review. The aspect of the synergism of copper and cysteine (unlike other amino acids) is quite promising for future researchers.

Synthesis of Phenol-Hydrazide-Appended Tetraphenylethenes as Novel On-Off-On Cascade Sensors of Copper and Glutathione

This study reports the synthesis of novel fluorescent probes, phenol-hydrazide-appended tetraphenylethenes (TPEs I and II), and explores their photochemical properties. The probes exhibit aggregation-induced emission (AIE) in increasing water content, as observed using fluorescence spectroscopy. Further investigation with UV-vis and fluorescence techniques revealed their potential as ion sensors. Both TPE I and TPE II act as "turn-off" sensors for Cu2+ ions, showing decreased fluorescence intensity in their presence. Their limit of detection (LOD) and association constant (K a) for Cu2+ were found to be comparable at 747 nM/597 nM, and 2.46 × 105 M-1/2/1.78 × 105 M-1/2, respectively. Moreover, the quantum yields of TPE I and TPE II were also calculated and found to be 0.651 and 0.325, respectively. Interestingly, these probes also function as "turn-on" sensors for glutathione (GSH) in the presence of copper. This means their fluorescence can be reversibly switched off and on by alternating CuCl2 and GSH additions. Moreover, the LOD values for GSH with TPE II-Cu2+ were calculated to be 544 nM. In addition, the investigation also employed visual analysis to assess the color alterations of TPEs on filter paper and in real water samples. Overall, this research introduces promising new probes with potential applications in copper ion detection and biomolecule glutathione sensing in real water samples.

Copper dynamics in vineyard topsoils as affected by the supply of aerated compost tea: insights from a batch experiment

Aerated compost teas (ACTs) are rich in soluble humic substances (SHS) that have high affinity for metals, notably Cu. Using a batch experiment, we measured the extent to which two ACTs altered Cu dynamics in vineyard topsoils one day and 21 days after their addition. Soils were extracted with 0.01 M KCl, and total Cu concentration, free Cu ion fraction and size distribution of Cu ligands were measured in the extraction solution to assess the impact of ACT on the mobility of Cu. Diffusive gradient in thin film (DGT) measurements were carried out to assess the effect of ACT on Cu bioavailability, and the dissociation rate of Cu-SHS complexes was measured. The results revealed that ACT increased the mobility of Cu from a factor 1.2 to 5.8 depending on the soil, the ACT and the incubation time. Cu mobilization was associated with an increase in absorbance at 254 nm and a decrease in the free Cu ion fraction in the KCl extract. Associated with the strong agreement between the size distribution of SHS and that of Cu ligands in the KCl extract of soils treated with ACT, these results showed that Cu was mobilized through complexation by the SHS present in ACTs. A fraction of the SHS supplied with ACTs sorbed onto the soil constituents, notably in calcareous soils where this fraction reached 86% for ACT B. Between 15% and 50% of the SHS remaining in solution degraded between day one and day 21 under the presumed action of microflora. This explains why the Cu mobilization efficiency of ACTs was on average lower in calcareous soils than in non-calcareous soils, and decreased with time. Lastly, ACT increased the bioavailability of Cu in soils from a factor 1.3 to 4.2, due to the relatively high dissociation rate of Cu-SHS complexes.

Resisting death by metal: metabolism and Cu/Zn homeostasis in bacteria

Metal ions such as zinc and copper play important roles in host-microbe interactions and their availability can drastically affect the survival of pathogenic bacteria in a host niche. Mechanisms of metal homeostasis protect bacteria from starvation, or intoxication, defined as when metals are limiting, or in excess, respectively. In this mini-review, we summarise current knowledge on the mechanisms of resistance to metal stress in bacteria, focussing specifically on the homeostasis of cellular copper and zinc. This includes a summary of the factors that subvert metal stress in bacteria, which are independent of metal efflux systems, and commentary on the role of small molecules and metabolic systems as important mediators of metal resistance.

Towards Copper(I) Clusters for Photo-Induced Oxidation of Biological Thiols in Living Cells

The cell redox balance can be disrupted by the oxidation of biological peptides, eventually leading to cell death, which provides opportunities to develop cytotoxic drugs. With the aim of developing compounds capable of specifically inducing fatal redox reactions upon light irradiation, we have developed a library of copper compounds. This metal is abundant and considered essential for human health, making it particularly attractive for the development of new anticancer drugs. Copper(I) clusters with thiol ligands (including 5 novel ones) have been synthesized and characterized. Structures were elucidated by X-ray diffraction and showed that the compounds are oligomeric clusters. The clusters display high photooxidation capacity towards cysteine - an essential amino acid - upon light irradiation in the visible range (450 nm), while remaining completely inactive in the dark. This photoredox activity against a biological thiol is very encouraging for the development of anticancer photoredox drugs.The in vitro assay on murine colorectal cancer cells (CT26) did not show any toxicity - whether in the dark or when exposed to 450 nm light, likely because of the poor solubility of the complexes in biological medium.

Flourescence sensors for heavy metal detection: major contaminants in soil and water bodies

Due to the increasing consumption of heavy metals, there is a rising need for specific and useful methods that are employed for the detection of heavy metals. Fluorescence sensing is a highly selective, rapid and biosensing technique that is employed in the determination of some heavy metals in any sample of soil or water, any other living person, the food being consumed or any other substance which are being used daily. These fluorescent methods are a type of analytical technique and they are mainly based on detection. Many types of metal conjugated molecules have been used of the detection of these heavy metals with various mechanisms. We have taken into account some specific sensor molecules as they were more suitable and easily accessible. These techniques that were employed in the detection of various heavy metals such as copper, lead and mercury have been discussed in the following review article.

GSH resistant, luminescent 2-(pyren-1-yl)-1H-imidazo[4,5-f][1,10]phenanthroline-based Ru(II)/Ir(III)/Re(I) complexes for phototoxicity in triple-negative breast cancer cells

Selective chemotherapeutic strategies necessitate the emergence of a photosensitive scaffold to abate the nuisance of cancer. In the current context, photo-activated chemotherapy (PACT) has, therefore, appeared to be very effective to vanquish the vehemence of triple-negative breast cancer (TNBC). Metal complexes have been identified to act well against cancer cell microenvironment (high GSH content, low pH, and hypoxia), and thus they have been employed in the treatment of various types of cancer. As TNBC is very challenging to treat owing to its poor prognosis, lack of a specific target, high chance of relapse, and strong metastatic ability, herein we have aspired to design GSH-resistant phototoxic Ru(II)/Ir(III)/Re(I) based pyrene imidazophenathroline complexes to selectively avert the triple-negative breast cancer. The application of complexes, [RuL], [IrL], and [ReL] in the absence and in the presence of GSH against MDA-MB-231TNBC cells, has revealed that they are very active upon irradiation of visible light compared to dark due to the creation of copious singlet oxygen (1O2) as reactive oxygen species (ROS). Among three synthesized complexes, [IrL] has shown outstanding potency (IC50 = 3.70 in the absence of GSH and IC50 = 3.90 in the presence of GSH). Also, the complex, [IrL] is capable of interacting with DNA with the highest binding constant (Kb = 0.023 × 106 M-1) along with higher protein binding affinity (KBSA = 0.0321 × 106 M-1). Here, it has been unveiled that all the complexes have been entitled to involve DNA covalent interaction through the available sites of both adenine and guanine bases.

Hydroxylamine enhanced the degradation of diclofenac in Cu(II)/peracetic acid system: Formation and contributions of CH3C(O)O•, CH3C(O)OO•, Cu(III) and •OH

The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)O•, CH3C(O)OO•, Cu(III), and •OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO• was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO• mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O• and •OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.

Fast degradation of atrazine by nZVI-Cu0/PMS: Re-evaluation and quantification of reactive species, generation pathways, and application feasibility

Additive metal to zero-valent iron (ZVI) could enhance the reduction ability and the additive Cu0 was incorporated to ZVI to accelerate PMS activation with atrazine (ATZ) as target compound. The efficiencies of ATZ degradation and PMS decomposition climbed up firstly and then declined as Cu0 loading increased from 0.01 to 1.00 wt% with the maximums at 0.10 wt%. SO4•-, HO•, Fe(IV), O2•- and 1O2 were generated by nZVI-Cu0/PMS based on the results of electron paramagnetic resonance (EPR) and simultaneous degradation of nitrobenzene, ATZ, and methyl phenyl sulfoxide (PMSO). The rate constant of Fe(IV) and ATZ was estimated as 7 × 104 M-1∙s-1 via the variation of methyl phenyl sulfone (PMSO2)formation at different ATZ concentrations. However, Fe(IV) contributed negligibly to ATZ degradation due to the strong scavenging of Fe(IV) by PMS. SO4•- and HO• were the reactive species responsible for ATZ degradation and the yield ratio of SO4•- and HO• was about 8.70 at initial stage. Preliminary thermodynamic calculation on the possible activation ways revealed that the dominant production of SO4•- might originate from the atomic H reduction of PMS in the surface layer of nZVI-Cu0. Ten products of ATZ degradation were identified by HPLC/ESI/QTOF and the possible degradation pathways were analyzed combined with theoretical calculation on ATZ structure. The decrease of temperature or increase of solution pH led to the decline of ATZ degradation, as well as the individual addition of common ions (HCO3-, Cl-, SO42-, NH4+, NO3- and F-) and natural organic matters (NOM). In real water, ATZ was still efficiently degraded with the decontamination efficiency decreasing in the sequence of tap water > surface water > simulated wastewater > groundwater. For the treatment of ATZ-polluted continuous flow, nZVI-Cu0 in double-layer layout had a higher capacity than the single-layer mode. Meanwhile, the leaching TFe and TCu were limited. The results indicate nZVI-Cu0/PMS is applicable and the multiple-layer layout of nZVI-Cu0 is suggested for ATZ-polluted ground water and soil remediation.

Mechanistic insights into the biological activity of S-Sulfocysteine in CHO cells using a multi-omics approach

S-Sulfocysteine (SSC), a bioavailable L-cysteine derivative (Cys), is known to be taken up and metabolized in Chinese hamster ovary (CHO) cells used to produce novel therapeutic biological entities. To gain a deeper mechanistic insight into the SSC biological activity and metabolization, a multi-omics study was performed on industrially relevant CHO-K1 GS cells throughout a fed-batch process, including metabolomic and proteomic profiling combined with multivariate data and pathway analyses. Multi-layered data and enzymatical assays revealed an intracellular SSC/glutathione mixed disulfide formation and glutaredoxin-mediated reduction, releasing Cys and sulfur species. Increased Cys availability was directed towards glutathione and taurine synthesis, while other Cys catabolic pathways were likewise affected, indicating that cells strive to maintain Cys homeostasis and cellular functions.

Interaction between Cu and Thiols of Biological and Environmental Importance: Case Study Using Combined Spectrophotometric/Bathocuproine Sulfonate Disodium Salt Hydrate (BCS) Assay

Considering the biological and ecological importance of Cu-thiol interactions and the discrepancies in previous research, this study focuses on Cu interactions with biologically and ecologically relevant thiols: glutathione (GSH), L-cysteine (L-cys), 3-mercaptopropionic acid (MPA), and thioacetic acid (TAA) in aqueous solution. The addition of Cu(II) to a thiol-containing solution led to a rapid reduction of Cu(II) and the formation of a Cu(I)-thiol complex. The mechanism of Cu(II) reduction and Cu(I) complex formation as well as the kinetics of Cu(I) oxidation strongly depend on the structural properties of the individual thiols investigated. The reducing power of the investigated thiols can be summarized as follows: L-cys ≅ GSH > MPA > TAA. The reaction order, with respect to Cu(I) oxidation, also changes over the time of the reaction course. The deviation of the reaction kinetics from the first order with respect to Cu(I) in the later stages of the reaction course can be attributed to a Fenton-like reaction occurring under low thiol concentration conditions. At high Cu:thiol ratios, in the case of GSH, L-cys, and MPA, the early stage of the reaction course is characterized by high Cu(I) stability, most likely as a result of Cu(I) complexation by the thiols present in excess in the reaction mixture.

Full Copper Resistance in Cupriavidus metallidurans Requires the Interplay of Many Resistance Systems

The metal-resistant bacterium Cupriavidus metallidurans uses its copper resistance components to survive the synergistic toxicity of copper ions and gold complexes in auriferous soils. The cup, cop, cus, and gig determinants encode as central component the Cu(I)-exporting P_IB1-type ATPase CupA, the periplasmic Cu(I)-oxidase CopA, the transenvelope efflux system CusCBA, and the Gig system with unknown function, respectively. The interplay of these systems with each other and with glutathione (GSH) was analyzed. Copper resistance in single and multiple mutants up to the quintuple mutant was characterized in dose-response curves, Live/Dead-staining, and atomic copper and glutathione content of the cells. The regulation of the cus and gig determinants was studied using reporter gene fusions and in case of gig also RT-PCR studies, which verified the operon structure of gigPABT. All five systems contributed to copper resistance in the order of importance: Cup, Cop, Cus, GSH, and Gig. Only Cup was able to increase copper resistance of the Δcop Δcup Δcus Δgig ΔgshA quintuple mutant but the other systems were required to increase copper resistance of the Δcop Δcus Δgig ΔgshA quadruple mutant to the parent level. Removal of the Cop system resulted in a clear decrease of copper resistance in most strain backgrounds. Cus cooperated with and partially substituted Cop. Gig and GSH cooperated with Cop, Cus, and Cup. Copper resistance is thus the result of an interplay of many systems. IMPORTANCE The ability of bacteria to maintain homeostasis of the essential-but-toxic "Janus"-faced element copper is important for their survival in many natural environments but also in case of pathogenic bacteria in their respective host. The most important contributors to copper homeostasis have been identified in the last decades and comprise P_IB1-type ATPases, periplasmic copper- and oxygen-dependent copper oxidases, transenvelope efflux systems, and glutathione; however, it is not known how all these players interact. This publication investigates this interplay and describes copper homeostasis as a trait emerging from a network of interacting resistance systems.

Molecular insights into Escherichia coli Cpx envelope stress response activation by the sensor lipoprotein NlpE

Bacterial two-component signal transduction systems provide sensory inputs for appropriately adapting gene expression. These systems rely on a histidine kinase that phosphorylates a response regulator which alters gene expression. Several two-component systems include additional sensory components that can activate the histidine kinase. In Escherichia coli, the lipoprotein NlpE was identified as a sensor for the Cpx cell envelope stress response. It has remained unclear how NlpE signals to Cpx in the periplasm. In this study, we used a combination of genetics, biochemistry, and AlphaFold2 complex modeling to uncover the molecular details of how NlpE triggers the Cpx response through an interaction with the CpxA histidine kinase. Remarkably, only a short loop of NlpE is required to activate the Cpx response. A single substitution in this loop inactivates NlpE signaling to Cpx and abolishes an in vivo biochemical NlpE:CpxA interaction. An independent AlphaFold multimer prediction supported a role for the loop and predicted an interaction interface at CpxA. Mutations in this CpxA region specifically blind the histidine kinase to NlpE activation but preserve the ability to respond to other cell envelope stressors. Hence, our work additionally reveals a previously unrecognized complexity in signal integration by the CpxA periplasmic sensor domain.

Excess copper catalyzes protein disulfide bond formation in the bacterial periplasm but not in the cytoplasm

Copper avidly binds thiols and is redox active, and it follows that one element of copper toxicity may be the generation of undesirable disulfide bonds in proteins. In the present study, copper oxidized the model thiol N-acetylcysteine in vitro. Alkaline phosphatase (AP) requires disulfide bonds for activity, and copper activated reduced AP both in vitro and when it was expressed in the periplasm of mutants lacking their native disulfide-generating system. However, AP was not activated when it was expressed in the cytoplasm of copper-overloaded cells. Similarly, this copper stress failed to activate OxyR, a transcription factor that responds to the creation of a disulfide bond. The elimination of cellular disulfide-reducing systems did not change these results. Nevertheless, in these cells, the cytoplasmic copper concentration was high enough to impair growth and completely inactivate enzymes with solvent-exposed [4Fe-4S] clusters. Experiments with N-acetylcysteine determined that the efficiency of thiol oxidation is limited by the sluggish pace at which oxygen regenerates copper(II) through oxidation of the thiyl radical-Cu(I) complex. We conclude that this slow step makes copper too inefficient a catalyst to create disulfide stress in the thiol-rich cytoplasm, but it can still impact the few thiol-containing proteins in the periplasm. It also ensures that copper accumulates intracellularly in the Cu(I) valence.

Reconstruction of reverse transsulfuration pathway enables cysteine biosynthesis and enhances resilience to oxidative stress in Chinese Hamster Ovary cells

Cysteine is a critically important amino acid necessary for mammalian cell culture, playing key roles in nutrient supply, disulfide bond formation, and as a precursor to antioxidant molecules controlling cellular redox. Unfortunately, its low stability and solubility in solution make it especially problematic as an essential medium component that must be added to Chinese hamster ovary and other mammalian cell cultures. Therefore, CHO cells have been engineered to include the capacity of endogenously synthesizing cysteine by overexpressing multiple enzymes, including cystathionine beta-synthase (CBS), cystathionine gamma-lyase (CTH) and glycine N-methyltransferase (GNMT) to reconstruct the reverse transsulfuration pathway and overcome a key metabolic bottleneck. Some limited cysteine biosynthesis was obtained by overexpressing CBS and CTH for converting homocysteine to cysteine but robust metabolic synthesis from methionine was only possibly after incorporating GNMT which likely represents a key bottleneck step in the cysteine biosynthesis pathway. CHO cells with the reconstructed pathway exhibit the strong capability to proliferate in cysteine-limited and cysteine-free batch and fed-batch cultures at levels comparable to wildtype cells with ample cysteine supplementation, providing a selectable marker for CHO cell engineering. GNMT overexpression led to the accumulation of sarcosine byproduct, but its accumulation did not affect cell growth. Furthermore, pathway reconstruction enhanced CHO cells' reduced and glutathione levels in cysteine-limited conditions compared to unmodified cells, and greatly enhanced survivability and maintenance of redox homeostasis under oxidative stress induced by addition of menadione in cysteine-deficient conditions. Such engineered CHO cell lines can potentially reduce or even eliminate the need to include cysteine in culture medium, which not only reduces the cost of mammalian media but also promises to transform media design by solving the challenges posed by low stability and solubility of cysteine and cystine in future mammalian biomanufacturing processes.

An ion mobility-mass spectrometry study of copper-metallothionein-2A: binding sites and stabilities of Cu-MT and mixed metal Cu-Ag and Cu-Cd complexes

The presence of Cu, a highly redox active metal, is known to damage DNA as well as other cellular components, but the adverse effects of cellular Cu can be mitigated by metallothioneins (MT), small cysteine rich proteins that are known to bind to a broad range of metal ions. While metal ion binding has been shown to involve the cysteine thiol groups, the specific ion binding sites are controversial as are the overall structure and stability of the Cu-MT complexes. Here, we report results obtained using nano-electrospray ionization mass spectrometry and ion mobility-mass spectrometry for several Cu-MT complexes and compare our results with those previously reported for Ag-MT complexes. The data include determination of the stoichiometries of the complex (Cui-MT, i = 1-19), and Cu+ ion binding sites for complexes where i = 4, 6, and 10 using bottom-up and top-down proteomics. The results show that Cu+ ions first bind to the β-domain to form Cu4MT then Cu6MT, followed by addition of four Cu+ ions to the α-domain to form a Cu10-MT complex. Stabilities of the Cui-MT (i = 4, 6 and 10) obtained using collision-induced unfolding (CIU) are reported and compared with previously reported CIU data for Ag-MT complexes. We also compare CIU data for mixed metal complexes (CuiAgj-MT, where i + j = 4 and 6 and CuiCdj, where i + j = 4 and 7). Lastly, higher order Cui-MT complexes, where i = 11-19, were also detected at higher concentrations of Cu+ ions, and the metalated product distributions observed are compared to previously reported results for Cu-MT-1A (Scheller et al., Metallomics, 2017, 9, 447-462).

Fabrication of Carbon-Based Quantum Dots via a "Bottom-Up" Approach: Topology, Chirality, and Free Radical Processes in "Building Blocks"

The discovery of carbon-based quantum dots (CQDs) has allowed opportunities for fluorescence bioimaging, tumor diagnosis and treatment, and photo-/electro-catalysis. Nevertheless, in the existing reviews related to the "bottom-up" approaches, attention is mainly paid to the applications of CQDs but not the formation mechanism of CQDs, which mainly derived from the high complexities during the synthesis of CQDs. Among the various synthetic methods, using small molecules as "building blocks", the development of a "bottom-up" approach has promoted the structural design, modulation of the photoluminescence properties, and control of the interfacial properties of CQDs. On the other hand, many works have demonstrated the "building blocks"-dependent properties of CQDs. In this review, from one of the most important variables, the relationships among intrinsic properties of "building blocks" and photoluminescence properties of CQDs are summarized. The topology, chirality, and free radical process are selected as descriptors for the intrinsic properties of "building blocks". This review focuses on the induction and summary of recent research results from the "bottom-up" process. Moreover, several empirical rules pertaining thereto are also proposed.

Switchable catalysis and CO2 sensing by reduction resistant, luminescent copper-thiolate complexes

Metal-thiolate complexes have been the focus of research for several years because of their unique photophysical properties and their use as a precursor for synthesizing various well-defined metal nanoclusters. A rational understanding of their structure-property relationship is necessary to realize their full potential in practical applications. Herein, we demonstrate the synthesis of a unique copper-thiolate complex with reversibly switchable catalytic and photoluminescence (PL) properties. The as-synthesized complex at basic pH (Complex B) showed cyan PL with a strong peak at ∼488 nm (cyan) and a small shoulder peak at ∼528 nm (green). When the pH of the complex was changed to acidic (Complex A), the PL was switched to light green. Such pH-responsive PL properties were demonstrated to be useful for pH and CO₂ sensing. The switchable properties originate from their two distinct structural states at two different pHs. We found that Complex A was resistant to high concentrations of a strong reducing agent, and had an intermediate oxidation state of copper (Cu⁺) with good thermodynamic stability. Furthermore, the switchable catalytic property was investigated with a 4-nitrophenol reduction and 3,3',5,5'-tetramethylbenzidine (TMB) oxidation reaction. The reduction kinetics followed pseudo-first-order, where the catalytic activity was enhanced by more than 10³ times when Complex B was switched to Complex A. A similar trend was also observed for TMB oxidation. Our design strategy demonstrates that redox switchable metal-thiolate complexes could be a powerful candidate for a plethora of applications.

Mutant Flavin-Based Fluorescent Protein Sensors for Detecting Intracellular Zinc and Copper in Escherichia coli

Flavin-based fluorescent proteins (FbFPs) are a class of fluorescent reporters that undergo oxygen-independent fluorophore incorporation, which is an important advantage over green fluorescent proteins (GFPs) and mFruits. A FbFP derived from Chlamydomonas reinhardtii (CreiLOV) is a promising platform for designing new metal sensors. Some FbFPs are intrinsically quenched by metal ions, but the question of where metals bind and how to tune metal affinity has not been addressed. We used site-directed mutagenesis of CreiLOV to probe a hypothesized copper(II) binding site that led to fluorescence quenching. Most mutations changed the fluorescence quenching level, supporting the proposed site. One key mutation introducing a second cysteine residue in place of asparagine (CreiLOVN41C) significantly altered metal affinity and selectivity, yielding a zinc sensor. The fluorescence intensity and lifetime of CreiLOVN41C were reversibly quenched by Zn2+ ions with a biologically relevant affinity (apparent dissociation constant, Kd, of 1 nM). Copper quenching of CreiLOVN41C was retained but with several orders of magnitude higher affinity than CreiLOV (Kd = 0.066 fM for Cu2+, 5.4 fM for Cu+) and partial reversibility. We also show that CreiLOVN41C is an excellent intensity- and lifetime-based zinc sensor in aerobic and anaerobic live bacterial cells. Zn2+-induced fluorescence quenching is reversible over several cycles in Escherichia coli cell suspensions and can be imaged by fluorescence microscopy. CreiLOVN41C is a novel oxygen-independent metal sensor that significantly expands the current fluorescent protein-based toolbox of metal sensors and will allow for studies of anaerobic and low oxygen systems previously precluded by the use of oxygen-dependent GFPs.

Comparison of Antimicrobial and Antibiofilm Activity of Proflavine Co-crystallized with Silver, Copper, Zinc, and Gallium Salts

Here, we exploit our mechanochemical synthesis for co-crystallization of an organic antiseptic, proflavine, with metal-based antimicrobials (silver, copper, zinc, and gallium). Our previous studies have looked for general antimicrobial activity for the co-crystals: proflavine·AgNO3, proflavine·CuCl, ZnCl3[Proflavinium], [Proflavinium]2[ZnCl4]·H2O, and [Proflavinium]3[Ga(oxalate)3]·4H2O. Here, we explore and compare more precisely the bacteriostatic (minimal inhibitory concentrations) and antibiofilm (prevention of cell attachment and propagation) activities of the co-crystals. For this, we choose three prominent "ESKAPE" bacterial pathogens of Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus. The antimicrobial behavior of the co-crystals was compared to that of the separate components of the polycrystalline samples to ascertain whether the proflavine-metal complex association in the solid state provided effective antimicrobial performance. We were particularly interested to see if the co-crystals were effective in preventing bacteria from initiating and propagating the biofilm mode of growth, as this growth form provides high antimicrobial resistance properties. We found that for the planktonic lifestyle of growth of the three bacterial strains, different co-crystal formulations gave selectivity for best performance. For the biofilm state of growth, we see that the silver proflavine co-crystal has the best overall antibiofilm activity against all three organisms. However, other proflavine-metal co-crystals also show practical antimicrobial efficacy against E. coli and S. aureus. While not all proflavine-metal co-crystals demonstrated enhanced antimicrobial efficacy over their constituents alone, all possessed acceptable antimicrobial properties while trapped in the co-crystal form. We also demonstrate that the metal-proflavine crystals retain antimicrobial activity in storage. This work defines that co-crystallization of metal compounds and organic antimicrobials has a potential role in the quest for antimicrobials/antiseptics in the defense against bacteria in our antimicrobial resistance era.

Chiral non-stoichiometric ternary silver indium sulfide quantum dots: investigation on the chirality transfer by cysteine

Chiral semiconductor quantum dots have recently received broad attention due to their promising application in several fields such as sensing and photonics. The extensive work in the last few years was focused on the observation of the chiroptical properties in binary Cd based systems. Herein, we report on the first evidence of ligand-induced chirality in silver indium sulfide semiconductor quantum dots. Ternary disulfide quantum dots are of great interest due to their remarkable optical properties and low toxicity. Non-stoichiometric silver indium sulfide quantum dots were produced via a room temperature coprecipitation in water, in the presence of cysteine as a capping agent. The obtained nanocrystals show a notable photoluminescence quantum yield of 0.24 in water dispersions. Several critical aspects of the nanocrystal growth and chemico-physical characterization, and the optimisation of the surface passivation by the chiral ligand in order to optimize the nanoparticle chirality are thoroughly investigated. Optical spectroscopy methods such as circular dichroism and luminescence as well as nuclear magnetic resonance techniques are exploited to analyze the coordination processes leading to the formation of the ligand-nanocrystal chiral interface. This study highlights the dynamic nature of the interaction between the nanocrystal surface and the chiral ligand and clarifies some fundamental aspects for the transfer and optimization of the chiroptical properties.

Catalytic oxidation of 4-acetamidophenol with Fe3+-enhanced Cu0 particles: In-site generation and activation of hydrogen peroxide

Cu⁰ coupled with O₂ was used to degrade contaminant due to in-site generation and catalysis of H₂O₂, while the low reactivity and active dismutation reaction of Cu⁺ refrained the performance at acidic condition. In this study, the removal rate of 4-acetamidophenol increased from 27 % to 83.4 % with Fe³⁺ spiked into the Cu⁰ system within 60 min •OH was the primary reactive species in the Fe³⁺/Cu⁰ system. In the Fe³⁺/Cu⁰ system, Cu⁰ was corroded to form Cu⁺ by H⁺ and O₂, and then Cu⁺ interacted with O₂ generating H₂O₂, and meanwhile Fe³⁺ was reduced to Fe²⁺ by Cu⁺ and Cu⁰; Consequently, Cu⁺ and Fe²⁺ induced H₂O₂ to produce •OH, but Fe²⁺ was easier to catalyze H₂O₂ than Cu⁺ at acidic pH. Except for fulvic acid, common water matrix including sulfate ion, phosphate ion, chloride ion and nitrate ion had no inhibition effect on the degradation of 4-acetamidophenol in the Fe³⁺/Cu⁰ system. over 62 % of 4-acetamidophenol in tap water, Hou-lake water and well water was greatly oxidized by the Fe³⁺/Cu⁰ system. Furthermore, the amount of total dissolved copper decreased to 0.895 mg/L by the method of alkali precipitation in the Fe³⁺/Cu⁰ system. The study provided a theoretical direction to the Fe³⁺-enhanced Cu⁰ system for purifying wastewater.

Reaction of N-Acetylcysteine with Cu2+: Appearance of Intermediates with High Free Radical Scavenging Activity: Implications for Anti-/Pro-Oxidant Properties of Thiols

We studied the kinetics of the reaction of N-acetyl-l-cysteine (NAC or RSH) with cupric ions at an equimolar ratio of the reactants in aqueous acid solution (pH 1.4−2) using UV/Vis absorption and circular dichroism (CD) spectroscopies. Cu2+ showed a strong catalytic effect on the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical (ABTSr) consumption and autoxidation of NAC. Difference spectra revealed the formation of intermediates with absorption maxima at 233 and 302 nm (ε302/Cu > 8 × 103 M−1 cm−1) and two positive Cotton effects centered at 284 and 302 nm. These intermediates accumulate during the first, O2-independent, phase of the NAC autoxidation. The autocatalytic production of another chiral intermediate, characterized by two positive Cotton effects at 280 and 333 nm and an intense negative one at 305 nm, was observed in the second reaction phase. The intermediates are rapidly oxidized by added ABTSr; otherwise, they are stable for hours in the reaction solution, undergoing a slow pH- and O2-dependent photosensitive decay. The kinetic and spectral data are consistent with proposed structures of the intermediates as disulfide-bridged dicopper(I) complexes of types cis-/trans-CuI2(RS)2(RSSR) and CuI2(RSSR)2. The electronic transitions observed in the UV/Vis and CD spectra are tentatively attributed to Cu(I) → disulfide charge transfer with an interaction of the transition dipole moments (exciton coupling). The catalytic activity of the intermediates as potential O2 activators via Cu(II) peroxo-complexes is discussed. A mechanism for autocatalytic oxidation of Cu(I)−thiolates promoted by a growing electronically coupled −[CuI2(RSSR)]n− polymer is suggested. The obtained results are in line with other reported observations regarding copper-catalyzed autoxidation of thiols and provide new insight into these complicated, not yet fully understood systems. The proposed hypotheses point to the importance of the Cu(I)−disulfide interaction, which may have a profound impact on biological systems.

LAG3 associates with TCR-CD3 complexes and suppresses signaling by driving co-receptor-Lck dissociation

LAG3 is an inhibitory receptor that is highly expressed on exhausted T cells. Although LAG3-targeting immunotherapeutics are currently in clinical trials, how LAG3 inhibits T cell function remains unclear. Here, we show that LAG3 moved to the immunological synapse and associated with the T cell receptor (TCR)-CD3 complex in CD4+ and CD8+ T cells, in the absence of binding to major histocompatibility complex class II-its canonical ligand. Mechanistically, a phylogenetically conserved, acidic, tandem glutamic acid-proline repeat in the LAG3 cytoplasmic tail lowered the pH at the immune synapse and caused dissociation of the tyrosine kinase Lck from the CD4 or CD8 co-receptor, which resulted in a loss of co-receptor-TCR signaling and limited T cell activation. These observations indicated that LAG3 functioned as a signal disruptor in a major histocompatibility complex class II-independent manner, and provide insight into the mechanism of action of LAG3-targeting immunotherapies.

Copper Induces Protein Aggregation, a Toxic Process Compensated by Molecular Chaperones

Copper is well known for its antimicrobial and antiviral properties. Under aerobic conditions, copper toxicity relies in part on the production of reactive oxygen species (ROS), especially in the periplasmic compartment. However, copper is significantly more toxic under anaerobic conditions, in which ROS cannot be produced. This toxicity has been proposed to arise from the inactivation of proteins through mismetallations. Here, using the bacterium Escherichia coli, we discovered that copper treatment under anaerobic conditions leads to a significant increase in protein aggregation. In vitro experiments using E. coli lysates and tightly controlled redox conditions confirmed that treatment with Cu+ under anaerobic conditions leads to severe ROS-independent protein aggregation. Proteomic analysis of aggregated proteins revealed an enrichment of cysteine- and histidine-containing proteins in the Cu+-treated samples, suggesting that nonspecific interactions of Cu+ with these residues are likely responsible for the observed protein aggregation. In addition, E. coli strains lacking the cytosolic chaperone DnaK or trigger factor are highly sensitive to copper stress. These results reveal that bacteria rely on these chaperone systems to protect themselves against Cu-mediated protein aggregation and further support our finding that Cu toxicity is related to Cu-induced protein aggregation. Overall, our work provides new insights into the mechanism of Cu toxicity and the defense mechanisms that bacteria employ to survive. IMPORTANCE With the increase of antibiotic drug resistance, alternative antibacterial treatment strategies are needed. Copper is a well-known antimicrobial and antiviral agent; however, the underlying molecular mechanisms by which copper causes cell death are not yet fully understood. Herein, we report the finding that Cu+, the physiologically relevant copper species in bacteria, causes widespread protein aggregation. We demonstrate that the molecular chaperones DnaK and trigger factor protect bacteria against Cu-induced cell death, highlighting, for the first time, the central role of these chaperones under Cu+ stress. Our studies reveal Cu-induced protein aggregation to be a central mechanism of Cu toxicity, a finding that will serve to guide future mechanistic studies and drug development.

Functional characterization of Legionella pneumophila Cu+ transport ATPase. The activation by Cu+ and ATP

Cu⁺-ATPases are integral membrane proteins belonging to the IB subfamily of the P-type ATPases that couple Cu⁺ transport to the hydrolysis of ATP. As some structural and functional particularities arise for Cu⁺-ATPases, several authors suggest that some of the reaction steps of the Albers-Post model postulated for other P-ATPases may be different. In this work we describe a functional characterization of Legionella pneumophila Cu⁺-ATPase (LpCopA), the first P_IB-ATPase whose structure was determined by X-ray crystallography. Cu⁺-ATPase activity of the enzyme presents a maximum at ∼37 °C and pH 6.6-6.8. Phospholipids enhance LpCopA Cu⁺-ATPase activity in a non-essential mode where optimal activity is achieved at an asolectin molar fraction of 0.15 and an amphiphile-protein ratio of ~30,000. As described for other P-ATPases, Mg²⁺ acts as an essential activator. Furthermore, Cu⁺-ATPase activity dependence on [Cu⁺] and [ATP] can both be described by a sum of two hyperbolic functions. Based on that, and the [Cu⁺] and [ATP] dependencies of the best fitting parameters of the hyperbolae pointed above, we propose a minimal reaction scheme for the catalytic mechanism that shares the basic reaction steps of the Albers-Post model for P-type ATPases. The reaction scheme postulated contemplates two different binding affinities for a single ATP (apparent affinities of 0.66 and 550 μM at [Cu⁺] → ∞) and binding of at least 2 Cu⁺ with different affinities as well (apparent affinities of 1.4 and 102.5 μM at [ATP] → ∞).

Copper acetate aerosols: a possible tool complementary to vaccination in fight against SARS-CoV-2 and variants replication

In SARS-CoV-2, at the S1/S2 furin cleavage site, a four amino acid insert (P-R-R-A) not found in closely related corona viruses, has been shown to facilitate entry into respiratory epithelial cells and promote virus transmission, infectivity and virulence. By cupric aerosol treatment, complexation of these four amino acids (-P-R-R-A-), at the spike (S) protein site will lead to a conformational change possibly impeding SARS-CoV-2 replication process in the respiratory track. Since these four amino acids yield strong and stable copper complexes, subsequent to a steric hindrance, this complexation will disturb the furin-like protease cleavage at the spike protein site as it has been recently shown in vitro with copper gluconate.

The compilation of stability constants for copper amino-acid complex formation, showing values of the same order of magnitude for all the twenty proteinogenic amino-acids demonstrate thermodynamically that copper amino-acid chelation for SARS-CoV-2 virus will not be affected by mutations leading to amino acid exchanges in the spike protein region. Given its low toxicity, and its very low stability formation constant, copper acetate is proposed rather than copper gluconate for possible cupric aerosol or nasal spray treatments aimed at impeding SARS-CoV-2 multiplication. It will open different medical perspectives, complementary to vaccination, in the fight against COVID 19 native virus, variants and future mutants.

Fast and Specific Peroxygenase Reactions Catalyzed by Fungal Mono-Copper Enzymes

The copper-dependent lytic polysaccharide monooxygenases (LPMOs) are receiving attention because of their role in the degradation of recalcitrant biomass and their intriguing catalytic properties. The fundamentals of LPMO catalysis remain somewhat enigmatic as the LPMO reaction is affected by a multitude of LPMO- and co-substrate-mediated (side) reactions that result in a complex reaction network. We have performed kinetic studies with two LPMOs that are active on soluble substrates, NcAA9C and LsAA9A, using various reductants typically employed for LPMO activation. Studies with NcAA9C under "monooxygenase" conditions showed that the impact of the reductant on catalytic activity is correlated with the hydrogen peroxide-generating ability of the LPMO-reductant combination, supporting the idea that a peroxygenase reaction is taking place. Indeed, the apparent monooxygenase reaction could be inhibited by a competing H2O2-consuming enzyme. Interestingly, these fungal AA9-type LPMOs were found to have higher oxidase activity than bacterial AA10-type LPMOs. Kinetic analysis of the peroxygenase activity of NcAA9C on cellopentaose revealed a fast stoichiometric conversion of high amounts of H2O2 to oxidized carbohydrate products. A kcat value of 124 ± 27 s-1 at 4 °C is 20 times higher than a previously described kcat for peroxygenase activity on an insoluble substrate (at 25 °C) and some 4 orders of magnitude higher than typical "monooxygenase" rates. Similar studies with LsAA9A revealed differences between the two enzymes but confirmed fast and specific peroxygenase activity. These results show that the catalytic site arrangement of LPMOs provides a unique scaffold for highly efficient copper redox catalysis.

Chemical design principles of next-generation antiviral surface coatings

The ongoing coronavirus disease 2019 (COVID-19) pandemic has accelerated efforts to develop high-performance antiviral surface coatings while highlighting the need to build a strong mechanistic understanding of the chemical design principles that underpin antiviral surface coatings. Herein, we critically summarize the latest efforts to develop antiviral surface coatings that exhibit virus-inactivating functions through disrupting lipid envelopes or protein capsids. Particular attention is focused on how cutting-edge advances in material science are being applied to engineer antiviral surface coatings with tailored molecular-level properties to inhibit membrane-enveloped and non-enveloped viruses. Key topics covered include surfaces functionalized with organic and inorganic compounds and nanoparticles to inhibit viruses, and self-cleaning surfaces that incorporate photocatalysts and triplet photosensitizers. Application examples to stop COVID-19 are also introduced and demonstrate how the integration of chemical design principles and advanced material fabrication strategies are leading to next-generation surface coatings that can help thwart viral pandemics and other infectious disease threats.

Enhanced Prodigiosin Production in Serratia marcescens JNB5-1 by Introduction of a Polynucleotide Fragment into the pigN 3' Untranslated Region and Disulfide Bonds into O-Methyl Transferase (PigF)

In Serratia marcescens JNB5-1, prodigiosin was highly produced at 30°C, but it was noticeably repressed at ≥37°C. Our initial results demonstrated that both the production and the stability of the O-methyl transferase (PigF) and oxidoreductase (PigN) involved in the prodigiosin pathway in S. marcescens JNB5-1 sharply decreased at ≥37°C. Therefore, in this study, we improved mRNA stability and protein production using de novo polynucleotide fragments (PNFs) and the introduction of disulfide bonds, respectively, and observed their effects on prodigiosin production. Our results demonstrate that adding PNFs at the 3' untranslated regions of pigF and pigN significantly improved the mRNA half-lives of these genes, leading to an increase in the transcript and expression levels. Subsequently, the introduction of disulfide bonds in pigF improved the thermal stability, pH stability, and copper ion resistance of PigF. Finally, shake flask fermentation showed that the prodigiosin titer with the engineered S. marcescens was increased by 61.38% from 5.36 to 8.65 g/liter compared to the JNB5-1 strain at 30°C and, significantly, the prodigiosin yield increased 2.05-fold from 0.38 to 0.78 g/liter at 37°C. In this study, we revealed that the introduction of PNFs and disulfide bonds greatly improved the expression and stability of pigF and pigN, hence efficiently enhancing prodigiosin production with S. marcescens at 30 and 37°C. IMPORTANCE This study highlights a promising strategy to improve mRNA/enzyme stability and to increase production using de novo PNF libraries and the introduction of disulfide bonds into the protein. PNFs could increase the half-life of target gene mRNA and effectively prevent its degradation. Moreover, PNFs could increase the relative intensity of target genes without affecting the expression of other genes; as a result, it could alleviate the cellular burden compared to other regulatory elements such as promoters. In addition, we obtained a PigF variant with improved activity and stability by the introduction of disulfide bonds into PigF. Collectively, we demonstrate here a novel approach for improving mRNA/enzyme stability using PNFs, which results in enhanced prodigiosin production in S. marcescens at 30°C.

Structure prediction of neutral physiological copper(II) compounds with l-cysteine and l-histidine

Bis(aminoacidato)copper(II) [Cu^II(aa)₂] coordination compounds are the physiological species of copper(II) amino acid compounds in blood plasma. Since there are no experimental data in the literature about the geometries that physiological Cu^II(aa)₂ could form with l-cysteine (Cys), that is, for bis(l-cysteinato)copper(II) [Cu(Cys)₂] and the ternary (l-histidinato)(l-cysteinato)copper(II) [Cu(His)(Cys)], this paper computationally examines the possible conformations that the two compounds could form with the Cys ligand having a protonated sulfur, as in the conventional zwitterion, which was determined to be prevailing in aqueous solution. These two amino acids can bind metals in a tridentate fashion and thus form many possible coordination patterns. Density functional calculations were performed for the conformational analyses in the gas phase and in implicitly modeled aqueous solution using a polarizable continuum model. Additionally, we examine which coordination mode, with thiol or thiolate group, is more stable. The Cys coordination via the amino N and carboxylato O atoms (a glycinato mode) is obtained as the most stable one in aqueous Cu(Cys)₂, and also in Cu(His)(Cys) when the His glycinato or histaminato mode combines with the intact thiol group. Whereas the conformers with N and thiol S as the copper(II) donor atoms are predicted to be the least stable, those with the Cu-N and Cu-S(thiolate) bonding (and protonated carboxylato group) are the most stable. The differences are explained by different covalent and ionic contributions of Cu-S(thiol) vs. Cu-S(thiolate). The study can contribute to the insight into formation and reactivity of the copper(II) cysteinato complexes in solution.

Direct Quantification and Visualization of Homocysteine, Cysteine, and Glutathione in Alzheimer's and Parkinson's Disease Model Tissues

Alzheimer's disease (AD) and Parkinson's disease (PD) are chronic neurodegenerative diseases with high morbidity and mortality. Homocysteine (Hcy), cysteine (Cys), and glutathione (GSH) are closely related to AD and PD. However, the dynamics of Hcy, Cys, and GSH in the brain tissues and the potential pathogenesis between Cys/Hcy/GSH with AD and PD remain unclear. Herein, a novel fluorescent probe 1 with multiple binding sites was rationally designed and exploited for the direct quantification of serum total Hcy and Cys along with superior optical properties. Importantly, differentiation and simultaneity fluorescence imaging of Cys, Hcy, and GSH dynamics were achieved in living cells, tissues, and mouse models of AD and PD with this probe, providing direct evidences for the relationship between Hcy/Cys/GSH and AD/PD for the first time. In addition, pathogenesis studies demonstrated that elevated Hcy and Cys levels are closely related to imbalanced redox homeostasis, increased amyloid aggregates, and nerve cell cytotoxicity. These findings will greatly promote the understanding of the functions of Hcy/Cys/GSH in Alzheimer's and Parkinson's diseases, demonstrating clinical promise for the early diagnosis and prevention of AD and PD.

Effect of the Metal-Ligand Interface on the Chiroptical Activity of Cysteine-Protected Nanoparticles

Gold, silver, and copper small nanoparticles (NPs), with average size ≈2 nm, are synthesized and afterward protected with l- and d-cysteine, demonstrating emergence of chiroptical activity in the wavelength range of 250-400 nm for all three metals with respect to the bare nanoparticles and ligands alone. Silver-cysteine (Ag-Cys) NPs display the higher anisotropy factor, whereas gold-cysteine (Au-Cys) NPs show optical and chiroptical signatures slightly more displaced to the visible range. A larger number of circular dichroism (CD) bands with smaller intensity, as compared to gold and silver, is observed for the first time for copper-cysteine (Cu-Cys) NPs. The manifestation of optical and chiroptical responses upon cysteine adsorption and the differences between the spectra corresponding to each metal are mainly dictated by the metal-ligand interface, as supported by a comparison with calculations of the oscillatory and rotatory strengths based on time-dependent density functional theory, using a metal-ligand interface motif model, which closely resembles the experimental absorption and CD spectra. These results are useful to demonstrate the relevance of the interface between chiral ligands and the metal surfaces of Au, Ag, and Cu NPs, and provide evidence and further insights into the origin of the transfer mechanisms and induction of extrinsic chirality.

The formation mechanism and chirality evolution of chiral carbon dots prepared via radical assisted synthesis at room temperature

We report on a Cu(ii) catalyzed process for the production of cysteine based chiral carbon dots; the process does not require any thermal treatment and the carbon dot formation is driven by the production of reactive radical species that are generated in the reaction media by the catalytic role played by the multivalent transition metal. The nanomaterial presents a well-defined chirality and the enantioselectivity of the synthesis is proved by the isolation of both the carbon dot enantiomers. We focused our attention on the processes that take place during the carbon dot formation and the relationship with the structure of the organic starting material. Thanks to the comparison of reactions conducted with different organic substrates whose thiyl radical chemistry is known, we recognized a non-trivial role of the radical hydrogen abstraction reactions in the carbon dot formation process. The reported process allows access to a large variety of analyses to monitor the reaction mixtures during the reaction course. Finally, we report a detailed analysis on the evolution of optical chirality during the synthesis and related this feature with the formation mechanism of the nanomaterial revealing significant evidence on the chirality origin and structure of chiral carbon dots.

Metal effect on intein splicing: A review

Inteins are intervening polypeptides that interrupt the functional domains of several important proteins across the three domains of life. Inteins excise themselves from the precursor protein, ligating concomitant extein residues in a process called protein splicing. Post-translational auto-removal of inteins remain critical for the generation of active proteins. The perspective of inteins in science is a robust field of research, however fundamental studies centralized upon splicing regulatory mechanism are imperative for addressing more intricate issues. Controlled engineering of intein splicing has many applications; intein inhibition can facilitate novel drug design, while activation of intein splicing is exploited in protein purification. This paper provides a comprehensive review of the past and recent advances in the splicing regulation via metal-intein interaction. We compare the behavior of different metal ions on diverse intein systems. Though metals such as Zn, Cu, Pt, Cd, Co, Ni exhibit intein inhibitory effect heterogeneously on different inteins, divalent metal ions such as Ca and Mg fail to do so. The observed diversity in the metal-intein interaction arises mostly due to intein polymorphism and variations in atomic structure of metals. A mechanistic understanding of intein regulation by metals in native as well as synthetically engineered intein systems may yield potent intein inhibitors via direct or indirect approach.