Probing the coordination behavior of Hg2+, CH3Hg+, and Cd2+ towards mixtures of two biological thiols by HPLC-ICP-AES

The emerging application of LC-based metallomics techniques to unravel the bioinorganic chemistry of toxic metal(loid)s

The on-going anthropogenic emission of toxic metal(loid) species into the environment contaminates the food supply and drinking water resources in various parts of the world. Given that inorganic pollutants cannot be degraded, their increased influx into the bloodstream of babies, children and pregnant women is inevitable. Since the ramifications of the ensuing environmental exposure on human health remain poorly defined, fundamentally new insight into their bioinorganic chemistry in organisms is urgently needed. Based on the flow of dietary constituents through organisms, the interaction of toxic metal(loid) species with biomolecules in the bloodstream deserve particular attention as they play an integral role in the mechanisms of their chronic toxicity. Gaining insight into these bioinorganic processes is hampered by the biological complexity of plasma/red blood cells and the low concentrations of the metal(loid) species of interest, but can be overcome by employing LC techniques hyphenated to atomic spectroscopic detectors (i.e. metallomics techniques). This perspective aims to highlight the potential of unconventional hyphenated separation modes to advance our understanding of the bioinorganic chemistry of toxic metal(loid) species in the bloodstream-organ system. Four examples are illustrated. The application of anion-exchange (AEX) and size-exclusion chromatography (SEC) provided new insight into the blood-based bioinorganic mechanisms that direct Cd2+ and MeHg+ to target organs. AEX chromatography also allowed to observe the formation of complexes between Hg2+ and MeHg+ with L-cysteine at pH 7.4, that are implicated in their organ uptake. Lastly, the application of reversed phase (RP) chromatography revealed a possible cytosolic mechanism by which N-acetyl-L-cysteine binds to MeHg+ in the presence of cytosolic glutathione (GSH). New insight into other bioinorganic processes may advance the regulatory framework to better protect public health.

A novel "turn-on" fluorescent probe based on thiocarbamoyl-DHP for Hg2+ detection in water samples and living cells

In this study, two fluorescent sensing probes, dihydropyridine (DHP) derivatives (DHP-CT1 and DHP-CT2) bearing phenoxy thiocarbonyl group, have been developed for Hg2+ detection. The tandem trimerization-cyclization of methylpropiolate with ammonium acetate gave 1.4-DHP and 1,2-DHP derivatives, which were reacted with O-phenylcarbonochloridothioate to produce DHP-CT1 and DHP-CT2, respectively. DHP-CT1 exhibits superior sensitivity and selectivity of fluorescence enhancement towards Hg2+ in aqueous media. The fluorescence intensity shows a good linear relationship with the concentration of Hg2+ in the range of 0-10 µM providing the extremely low LOD of 346 nM (69.4 ppb). The fluorescence enhancement is caused by the Hg2+ promoted hydrolysis of the thioamide bond releasing the fluorescent 1,4-DHP that was confirmed by NMR and HRMS. The quantitative analysis of Hg2+ in water samples using DHP-CT1 probe was demonstrated in aqueous solution and paper-based sensing strips. Furthermore, DHP-CT1 was also applied for monitoring intracellular Hg2+ in living RAW264.7 macrophages through fluorescence cell imaging.

N-Acetylcysteine Displaces Glutathionyl-Moieties from Hg2+ and MeHg+ to Form More Hydrophobic Complexes at Near-Physiological Conditions

The anthropogenic release of Hg is associated with an increased human exposure risk. Since Hg2+ and MeHg+ have a high affinity for thiols, their interaction with L-glutathione (GSH) within mammalian cells is fundamentally involved in their toxicological chemistry and excretion. To gain insight into the interaction of these mercurials with multiple small molecular weight thiols, we have investigated their competitive interactions with GSH and N-acetylcysteine (NAC) at near-physiological conditions, using a liquid chromatographic approach. This approach involved the injection of each mercurial onto a reversed-phase (RP)-HPLC column (37 °C) using a PBS buffer mobile phase containing 5.0 mM GSH to simulate cytosolic conditions with Hg being detected in the column effluent by an inductively coupled plasma atomic emission spectrometer (ICP-AES). When the 5.0 mM GSH mobile phase was amended with up to 10 mM NAC, gradually increasing retention times of both mercurials were observed. To explain this behavior, the experiment with 5.0 mM NAC and 5.0 mM GSH was replicated using 50 mM Tris buffer (pH 7.4), and the Hg-containing fractions were analyzed by electrospray ionization mass spectrometry. The results revealed the presence of Hg(GS)(NAC) and Hg(NAC)2 for Hg2+ and MeHg(GS) and MeHg(NAC) for MeHg+, which suggests that the coordination/displacement of GS-moieties from each mercurial by the more hydrophobic NAC can explain their retention behavior. Since the biotransformations of both mercurials were observed at near-physiological conditions, they are of toxicological relevance as they provide a biomolecular explanation for some results that were obtained when animals were administered with each mercurial and NAC.

Structural Characterization of Toxicologically Relevant Cd2+-L-Cysteine Complexes

The exposure of humans to Cd exerts adverse human health effects at low chronic exposure doses, but the underlying biomolecular mechanisms are incompletely understood. To gain insight into the toxicologically relevant chemistry of Cd²⁺ in the bloodstream, we employed an anion-exchange HPLC coupled to a flame atomic absorption spectrometer (FAAS) using a mobile phase of 100 mM NaCl with 5 mM Tris-buffer (pH 7.4) to resemble protein-free blood plasma. The injection of Cd²⁺ onto this HPLC-FAAS system was associated with the elution of a Cd peak that corresponded to [CdCl₃]^-/[CdCl₄]^2- complexes. The addition of 0.1-10 mM L-cysteine (Cys) to the mobile phase significantly affected the retention behavior of Cd²⁺, which was rationalized by the on-column formation of mixed CdCys_xCl_y complexes. From a toxicological point of view, the results obtained with 0.1 and 0.2 mM Cys were the most relevant because they resembled plasma concentrations. The corresponding Cd-containing (~30 μM) fractions were analyzed by X-ray absorption spectroscopy and revealed an increased sulfur coordination to Cd²⁺ when the Cys concentration was increased from 0.1 to 0.2 mM. The putative formation of these toxicologically relevant Cd species in blood plasma was implicated in the Cd uptake into target organs and underscores the notion that a better understanding of the metabolism of Cd in the bloodstream is critical to causally link human exposure with organ-based toxicological effects.

Preliminary exploration of direct mercury speciation in solid samples by using thermal release coupled to electrothermal atomic absorption spectrometry

It is known that monitoring of mercury and notably its species is very important to assess their impact and distribution in the environment. In this regard, the development of a methodology for mercury speciation in natural and man-made media is of particular importance. There are a variety of studies in this area associated with the application of thermal release in combination with electrothermal atomic absorption detection for direct mercury speciation in solid samples without preliminary extraction of analytes. Nevertheless, a number of issues remain that hinder its practical application as a reliable analytical method. However, in order to achieve progress in this field, it is necessary to understand the features of the evaporation process itself. The goal of this work is to study the thermal behavior of the most common mercury species in order to eliminate the gaps in this approach. At this stage, studies were carried out using pure substances and their mixtures as a starting point for a subsequent transition to real natural samples. For this the installation scheme was modernized by introducing a module that provides programmable heating of the sample and variation of the heating rate. As a result of the experiments it was shown that the transformation of studied compounds with the examples of mercury chloride, methylmercury chloride, mercury sulfide and mercury sulfate occurs under thermal exposure, which leads to a change in their physicochemical characteristics, but, nevertheless, does not prevent their baseline separation for 30 min using programmable heating mode, which includes a continuous increase in temperature with a subsequent stop until the thermal peak is formed.

Data collection from crystals grown in microfluidic droplets

Protein crystals grown in microfluidic droplets have been shown to be an effective and robust platform for storage, transport and serial crystallography data collection with a minimal impact on diffraction quality. Single macromolecular microcrystals grown in nanolitre-sized droplets allow the very efficient use of protein samples and can produce large quantities of high-quality samples for data collection. However, there are challenges not only in growing crystals in microfluidic droplets, but also in delivering the droplets into X-ray beams, including the physical arrangement, beamline and timing constraints and ease of use. Here, the crystallization of two human gut microbial hydrolases in microfluidic droplets is described: a sample-transport and data-collection approach that is inexpensive, is convenient, requires small amounts of protein and is forgiving. It is shown that crystals can be grown in 50-500 pl droplets when the crystallization conditions are compatible with the droplet environment. Local and remote data-collection methods are described and it is shown that crystals grown in microfluidics droplets and housed as an emulsion in an Eppendorf tube can be shipped from the US to the UK using a FedEx envelope, and data can be collected successfully. Details of how crystals were delivered to the X-ray beam by depositing an emulsion of droplets onto a silicon fixed-target serial device are provided. After three months of storage at 4°C, the crystals endured and diffracted well, showing only a slight decrease in diffracting power, demonstrating a suitable way to grow crystals, and to store and collect the droplets with crystals for data collection. This sample-delivery and data-collection strategy allows crystal droplets to be shipped and set aside until beamtime is available.

Physiologically relevant hCys concentrations mobilize MeHg from rabbit serum albumin to form MeHg-hCys complexes

Methylmercury (MeHg) is one of the most potent neurotoxins to which humans are exposed via the consumption of fish from which it is effectively absorbed via the gastrointestinal tract into the bloodstream. Its interactions with plasma proteins, small molecular weight (SMW) molecules, and red blood cells, however, are incompletely understood, but critical as they determine if and how much MeHg reaches target organs. To better define the role that SMW thiols play in the delivery of MeHg to known transporters located at the placental and blood-brain barrier, we have employed size exclusion chromatography-inductively coupled plasma-atomic emission spectroscopy to analyze MeHg-spiked rabbit plasma in the absence and presence of SMW thiols dissolved in the PBS-buffer mobile phase. While 300 µM L-methionine did not affect the binding of MeHg to rabbit serum albumin (RSA), cysteine (Cys), homocysteine (hCys) and glutathione (GSH) resulted in the elution of the main Hg-peak in the SMW elution range. In addition, 50 µM of hCys or Cys in the mobile phase resulted in the mobilization of MeHg from RSA in rabbit plasma and from pure RSA in solution. The Hg-peak that eluted in the SMW elution range (50 µM of hCys) was identified by electrospray ionization-mass spectrometry as a MeHg-hCys complex. Since L-type amino acid transporters are present at the blood brain barrier (BBB) which facilitate the uptake of MeHg-Cys species into the brain, our results contribute to establish the bioinorganic mechanisms that deliver MeHg to the BBB, which is critical to predict organ-based adverse health effects.

Ten Years Progress of Electrical Detection of Heavy Metal Ions (HMIs) Using Various Field-Effect Transistor (FET) Nanosensors: A Review

Heavy metal pollution remains a major concern for the public today, in line with the growing population and global industrialization. Heavy metal ion (HMI) is a threat to human and environmental safety, even at low concentrations, thus rapid and continuous HMI monitoring is essential. Among the sensors available for HMI detection, the field-effect transistor (FET) sensor demonstrates promising potential for fast and real-time detection. The aim of this review is to provide a condensed overview of the contribution of certain semiconductor substrates in the development of chemical and biosensor FETs for HMI detection in the past decade. A brief introduction of the FET sensor along with its construction and configuration is presented in the first part of this review. Subsequently, the FET sensor deployment issue and FET intrinsic limitation screening effect are also discussed, and the solutions to overcome these shortcomings are summarized. Later, we summarize the strategies for HMIs' electrical detection, mechanisms, and sensing performance on nanomaterial semiconductor FET transducers, including silicon, carbon nanotubes, graphene, AlGaN/GaN, transition metal dichalcogenides (TMD), black phosphorus, organic and inorganic semiconductor. Finally, concerns and suggestions regarding detection in the real samples using FET sensors are highlighted in the conclusion.

Methylmercury formation in boreal wetlands in relation to chemical speciation of mercury(II) and concentration of low molecular mass thiols

Methylmercury (MeHg) is a neurotoxin formed from inorganic divalent mercury (Hg^II) via microbial methylation, and boreal wetlands have been identified as major sources of MeHg. There is however a lack of studies investigating the relationship between the chemical speciation of Hg^II and MeHg formation in such environments, in particular regarding to role of thiol compounds. We determined Hg^II methylation potentials, k_meth, in boreal wetland soils using two Hg^II isotope tracers: ¹⁹⁸Hg(OH)₂(aq) and Hg^II bonded to thiol groups in natural organic matter, ²⁰⁰Hg^II-NOM(ads), representing Hg^II sources with high and low availability for methylation. The ¹⁹⁸Hg(OH)₂(aq) tracer was consistently methylated to a 5-fold higher extent than ²⁰⁰Hg^II-NOM(ads), independent of environmental conditions. This suggests that the concentration of Hg^II in porewater was a decisive factor for Hg^II methylation. A comprehensive thermodynamic speciation model (including Hg^II complexes with inorganic sulfide (H₂S), polysulfides (H₂S_n), thiols associated with natural organic matter (NOM-RSH) and specific low molecular mass thiols (LMM-RSH) provided new insights on the speciation of Hg^II in boreal wetland porewaters, but did not demonstrate any clear relationship between k_meth and the calculated chemical speciation. In contrast, significant positive relationships were observed between k_meth and the sum of LMM thiol compounds of biological origin. We suggest two possible mechanisms underlying these correlations: 1) LMM thiols kinetically control the size and composition of the Hg^II pool available for microbial uptake, and/or 2) LMM thiols are produced by microbes such that the correlation reflects a relation between microbial activity and MeHg formation.

Toward an Internally Consistent Model for Hg(II) Chemical Speciation Calculations in Bacterium-Natural Organic Matter-Low Molecular Mass Thiol Systems

To advance the scientific understanding of bacteria-driven mercury (Hg) transformation processes in natural environments, thermodynamics and kinetics of divalent mercury Hg(II) chemical speciation need to be understood. Based on Hg L_III-edge extended X-ray absorption fine structure (EXAFS) spectroscopic information, combined with competitive ligand exchange (CLE) experiments, we determined Hg(II) structures and thermodynamic constants for Hg(II) complexes formed with thiol functional groups in bacterial cell membranes of two extensively studied Hg(II) methylating bacteria: Geobacter sulfurreducens PCA and Desulfovibrio desulfuricans ND132. The Hg EXAFS data suggest that 5% of the total number of membranethiol functionalities (Mem-RS_tot = 380 ± 50 μmol g^-1 C) are situated closely enough to be involved in a 2-coordinated Hg(Mem-RS)₂ structure in Geobacter. The remaining 95% of Mem-RSH is involved in mixed-ligation Hg(II)-complexes, combining either with low molecular mass (LMM) thiols like Cys, Hg(Cys)(Mem-RS), or with neighboring O/N membrane functionalities, Hg(Mem-RSRO). We report log K values for the formation of the structures Hg(Mem-RS)₂, Hg(Cys)(Mem-RS), and Hg(Mem-RSRO) to be 39.1 ± 0.2, 38.1 ± 0.1, and 25.6 ± 0.1, respectively, for Geobacter and 39.2 ± 0.2, 38.2 ± 0.1, and 25.7 ± 0.1, respectively, for ND132. Combined with results obtained from previous studies using the same methodology to determine chemical speciation of Hg(II) in the presence of natural organic matter (NOM; Suwannee River DOM) and 15 LMM thiols, an internally consistent thermodynamic data set is created, which we recommend to be used in studies of Hg transformation processes in bacterium-NOM-LMM thiol systems.

Determination of picomolar levels of methylmercury complexes with low molecular mass thiols by liquid chromatography tandem mass spectrometry and online preconcentration

Methylmercury (MeHg) is one of the most potent neurotoxins. It is produced in nature through the methylation of inorganic divalent mercury (Hg^II) by phylogenetically diverse anaerobic microbes. The mechanistic understanding of the processes that govern the extent of bacterial export of MeHg, its bioaccumulation, and bio-toxicity depends on accurate quantification of its species, especially its complexation with low molecular mass thiols; organometallic complexes that are difficult to detect and measure in natural conditions. Here, we report the development of a novel analytical method based on liquid chromatography tandem mass spectrometry (LC-MS/MS) to determine 13 MeHg complexes with important thiol compounds which have been observed in the environment and in biological systems. By using online preconcentration via solid phase extraction (SPE), the method offers picomolar (12-530 pM) detection limits, the lowest reported so far for the determination of MeHg compounds. Among three different SPE materials, a weak cation exchange phase showed the best efficiency at a low pH of 2.5. We further report the presence of MeHg-cysteine, MeHg-cysteamine, MeHg-penicillamine, MeHg-cysteinylglycine, and MeHg-glutamylcysteine as the predominant MeHg-thiol complexes in the extracellular milieu of an important Hg^II methylating bacterium, Geobacter sulfurreducens PCA, exposed to 100 nM of Hg^II.

Potential mechanisms of cellular injury following exposure to a physiologically relevant species of inorganic mercury

Mercury is a toxic metal that is found ubiquitously in the environment. Humans are exposed to different forms of mercury via ingestion, inhalation, and/or dermal absorption. Following exposure, mercuric ions may gain access to target cells and subsequently lead to cellular intoxication. The mechanisms by which mercury accumulation leads to cellular injury and death are not understood fully. Therefore, purpose of this study was to identify the specific intracellular mechanisms that are altered by exposure to inorganic mercury (Hg²⁺). Normal rat kidney (NRK) cells were exposed to a physiologically relevant form of Hg²⁺, as a conjugate of cysteine (10 μM or 50 μM). Alterations in oxidative stress were estimated by measuring lipid peroxidation and mitochondrial oxidative stress. Alterations in actin and tubulin were measured using specific fluorescent dyes. Calcium levels were measured using Fluo-3 AM Calcium Indicator while autophagy was identified with Premo^™ Autophagy Sensor LC3B-GFP. The current findings show that exposure to Hg²⁺ leads to enhanced oxidative stress, alterations in cytoskeletal structure, increases in intracellular calcium, and enhanced autophagy. We have established a more complete understanding of intoxication and cellular injury induced by a relevant form of Hg²⁺ in proximal tubule cells.

Remarkable differences in the biochemical fate of Cd2+, Hg2+, CH3Hg+ and thimerosal in red blood cell lysate

The application of a metallomics method revealed that all investigated Hg species bound to hemoglobin and that these interactions are of toxicological significance.

Highly responsive glutathione functionalized green AuNP probe for precise colorimetric detection of Cd2+ contamination in the environment

Precise colorimetric detection of Cd²⁺ using a glutathione functionalized phytosynthesized AuNP probe provides an ecofriendly approach to heavy metal detection.

Advanced nanoporous materials for micro-gravimetric sensing to trace-level bio/chemical molecules

Functionalized nanoporous materials have been developed recently as bio/chemical sensing materials. Due to the huge specific surface of the nano-materials for molecular adsorption, high hopes have been placed on gravimetric detection with micro/nano resonant cantilevers for ultra-sensitive sensing of low-concentration bio/chemical substances. In order to enhance selectivity of the gravimetric resonant sensors to the target molecules, it is crucial to modify specific groups onto the pore-surface of the nano-materials. By loading the nanoporous sensing material onto the desired region of the mass-type transducers like resonant cantilevers, the micro-gravimetric bio/chemical sensors can be formed. Recently, such micro-gravimetric bio/chemical sensors have been successfully applied for rapid or on-the-spot detection of various bio/chemical molecules at the trace-concentration level. The applicable nanoporous sensing materials include mesoporous silica, zeolite, nanoporous graphene oxide (GO) and so on. This review article focuses on the recent achievements in design, preparation, functionalization and characterization of advanced nanoporous sensing materials for micro-gravimetric bio/chemical sensing.

Metal Species in Biology: Bottom-Up and Top-Down LC Approaches in Applied Toxicological Research

Since the inception of liquid chromatography (LC) more than 100 years ago this separation technique has been developed into a powerful analytical tool that is frequently applied in life science research. To this end, unique insights into the interaction of metal species (throughout this manuscript “metal species” refers to “toxic metals, metalloid compounds, and metal-based drugs” and “toxic metals” to “toxic metals and metalloid compounds”) with endogenous ligands can be obtained by using LC approaches that involve their hyphenation with inductively coupled plasma-based element specific detectors. This review aims to provide a synopsis of the different LC approaches which may be employed to advance our understanding of these interactions either in a “bottom-up” or a “top-down” manner. In the “bottom-up” LC-configuration, endogenous ligands are introduced into a physiologically relevant mobile phase buffer, and the metal species of interest is injected. Subsequent “interrogation” of the on-column formed complex(es) by employing a suitable separation mechanism (e.g., size exclusion chromatography or reversed-phase LC) while changing the ligand concentration(s), the column temperature or the pH can provide valuable insight into the formation of complexes under near physiological conditions. This approach allows to establish the relative stability and hydrophobicity of metal-ligand complexes as well as the dynamic coordination of a metal species (injected) to two ligands (dissolved in the mobile phase). Conversely, the “top-down” analysis of a biological fluid (e.g., blood plasma) by LC (e.g., using size exclusion chromatography) can be used to determine the size distribution of endogenous metalloproteins which are collectively referred to as the “metalloproteome”. This approach can provide unique insight into the metabolism and the plasma protein binding of metal species, and can simultaneously visualize the dose-dependent perturbation of the metalloproteome by a particular metal species. The concerted application of these LC approaches is destined to provide new insight into biochemical processes which represent an important starting point to advance human health in the 21st century.

The influence of Cd²⁺, Hg²⁺ and Pb²⁺ on taxifolin binding to bovine serum albumin by spectroscopic methods: with the viewpoint of toxic ions/drug interference

The effect of heavy metal ions, Cd(2+), Hg(2+) and Pb(2+) on taxifolin binding to bovine serum albumin (BSA) has been investigated by spectroscopic methods. The results indicated that the presence of heavy metal ions significantly affected the binding modes and binding affinities of taxifolin to BSA, and the effects depended on the type of heavy metal ions. One binding mode was found for taxifolin with and without Cd(2+), while two binding modes-a weaker one at low concentration and a stronger one at high concentration-were found for taxifolin in the presence of Hg(2+) and Pb(2+). Cd(2+) decreased the binding affinity of taxifolin for BSA by 7.3%; however, Hg(2+) increased the binding affinity of taxifolin for BSA by 13.3% in lower concentration and 33.3% in higher concentration. Pb(2+) decreased the binding affinity of taxifolin for BSA by 28.4% in lower concentration, and increased the binding affinity of taxifolin for BSA by 20.6% in higher concentration. The decreased binding affinity of taxifolin for BSA in the presence of Cd(2+) was mainly because of the existence of competitive binding between taxifolin and Cd(2+). However, the conformational change of BSA may the main reason for the changed binding affinity and binding distance of taxifolin for BSA in the presence of Hg(2+) and Pb(2+).

Improved RP-HPLC separation of Hg²⁺ and CH₃Hg⁺ using a mixture of thiol-based mobile phase additives

Hg(2+) and CH(3)Hg(+) are frequently encountered in the environment either as free ions or complexed with organic matter, such as humic acids. The majority of the reported HPLC-based separations of environmental mercury species, however, separate Hg(2+) from CH(3)Hg(+) in which the former species elutes close to the void volume. To detect mercury-species in environmental waters that may have so far escaped detection, a separation method is needed that sufficiently retains both Hg(2+) and CH(3)Hg(+). One way to develop such a method is to increase the retention of Hg(2+) and CH(3)Hg(+) using existing HPLC separations. We here report on the improvement of a previously reported RP-HPLC-based separation of Hg(2+) and CH(3)Hg(+) that employed a 100 % aqueous mobile phase [10 mM L-cysteine (Cys) in 50 mM phosphate buffer (pH 7.5)]. To increase the retention of Hg(2+), Cys was replaced by the comparatively more hydrophobic N-acetylcysteine (N-Cys). To achieve a compromise between an increased retention of Hg(2+) and its baseline separation from CH(3)Hg(+) in the shortest possible analysis time, the retention behavior of both mercurials was investigated on two RP-HPLC columns with mobile phases that contained mixtures of Cys and N-Cys in which the overall thiol concentration was maintained at 10 mM. An optimal separation of both mercurials could be achieved in ∼540 s using a Gemini C(18) HPLC column (150 × 4.6 mm I.D.) and a mobile phase comprised of 7.5 mM N-Cys and 2.5 Cys in 50 mM phosphate buffer (pH 7.4). Coupling the developed HPLC separation with an inductively coupled plasma mass spectrometer should allow one to detect mercury species other than Hg(2+) and CH(3)Hg(+) in environmental waters. The detection of such species is critical to better understand the mobilization of mercury species from natural and anthropogenic pollution sources.

Influence of Cd2+, Hg2+ and Pb2+ on (+)-catechin binding to bovine serum albumin studied by fluorescence spectroscopic methods

The effect of heavy metal ions, Cd(2+), Hg(2+) and Pb(2+) on (+)-catechin binding to bovine serum albumin (BSA) has been investigated by spectroscopic methods. The results indicated that the presence of heavy metal ions significantly affected the binding modes and binding affinities of (+)-catechin to BSA, and the effects depend on the types of heavy metal ion. One binding mode was found for (+)-catechin with and without Cd(2+), while two binding modes - a weaker one at low concentration and a stronger one at high concentration were found for (+)-catechin in the presence of Hg(2+) and Pb(2+). The presence of Cd(2+) decreased the binding affinities of (+)-catechin for BSA by 20.5%. The presence of Hg(2+) and Pb(2+) decreased the binding affinity of (+)-catechin for BSA by 8.9% and 26.7% in lower concentration, respectively, and increased the binding affinity of (+)-catechin for BSA by 5.2% and 9.2% in higher concentration, respectively. The changed binding affinity and binding distance of (+)-catechin for BSA in the presence of Cd(2+), Hg(2+) and Pb(2+) were mainly because of the conformational change of BSA induced by heavy metal ions. However, the quenching mechanism for (+)-catechin to BSA was based on static quenching combined with non-radiative energy transfer irrespective of the absence or presence of heavy metal ions.