DNA binding specificity of the replication initiator protein, DnaA from Helicobacter pylori

Putative Cooperative ATP-DnaA Binding to Double-Stranded DnaA Box and Single-Stranded DnaA-Trio Motif upon Helicobacter pylori Replication Initiation Complex Assembly

oriC is a region of the bacterial chromosome at which the initiator protein DnaA interacts with specific sequences, leading to DNA unwinding and the initiation of chromosome replication. The general architecture of oriCs is universal; however, the structure of oriC and the mode of orisome assembly differ in distantly related bacteria. In this work, we characterized oriC of Helicobacter pylori, which consists of two DnaA box clusters and a DNA unwinding element (DUE); the latter can be subdivided into a GC-rich region, a DnaA-trio and an AT-rich region. We show that the DnaA-trio submodule is crucial for DNA unwinding, possibly because it enables proper DnaA oligomerization on ssDNA. However, we also observed the reverse effect: DNA unwinding, enabling subsequent DnaA-ssDNA oligomer formation-stabilized DnaA binding to box ts1. This suggests the interplay between DnaA binding to ssDNA and dsDNA upon DNA unwinding. Further investigation of the ts1 DnaA box revealed that this box, together with the newly identified c-ATP DnaA box in oriC1, constitute a new class of ATP-DnaA boxes. Indeed, in vitro ATP-DnaA unwinds H. pylori oriC more efficiently than ADP-DnaA. Our results expand the understanding of H. pylori orisome formation, indicating another regulatory pathway of H. pylori orisome assembly.

Identification of the Unwinding Region in the Clostridioides difficile Chromosomal Origin of Replication

Faithful DNA replication is crucial for viability of cells across all kingdoms. Targeting DNA replication is a viable strategy for inhibition of bacterial pathogens. Clostridioides difficile is an important enteropathogen that causes potentially fatal intestinal inflammation. Knowledge about DNA replication in this organism is limited and no data is available on the very first steps of DNA replication. Here, we use a combination of in silico predictions and in vitro experiments to demonstrate that C. difficile employs a bipartite origin of replication that shows DnaA-dependent melting at oriC2, located in the dnaA-dnaN intergenic region. Analysis of putative origins of replication in different clostridia suggests that the main features of the origin architecture are conserved. This study is the first to characterize aspects of the origin region of C. difficile and contributes to our understanding of the initiation of DNA replication in clostridia.

The role of Helicobacter pylori DnaA domain I in orisome assembly on a bipartite origin of chromosome replication

The main roles of the DnaA protein are to bind the origin of chromosome replication (oriC), to unwind DNA and to provide a hub for the step-wise assembly of a replisome. DnaA is composed of four domains, with each playing a distinct functional role in the orisome assembly. Out of the four domains, the role of domain I is the least understood and appears to be the most species-specific. To better characterise Helicobacter pylori DnaA domain I, we have constructed a series of DnaA variants and studied their interactions with H. pylori bipartite oriC. We show that domain I is responsible for the stabilisation and organisation of DnaA-oriC complexes and provides cooperativity in DnaA-DNA interactions. Domain I mediates cross-interactions between oriC subcomplexes, which indicates that domain I is important for long-distance DnaA interactions and is essential for orisosme assembly on bipartite origins. HobA, which interacts with domain I, increases the DnaA binding to bipartite oriC; however, it does not stimulate but rather inhibits DNA unwinding. This suggests that HobA helps DnaA to bind oriC, but an unknown factor triggers DNA unwinding. Together, our results indicate that domain I self-interaction is important for the DnaA assembly on bipartite H. pylori oriC.

Insights into the initiation of chromosome II replication of the pressure-loving deep-sea bacterium Photobacterium profundum SS9

How DNA metabolism is adapted to survival of organisms such as the bacterium Photobacterium profundum SS9 at high pressure is unknown. Previously, a high pressure-sensitive P. profundum SS9 transposon mutant (FL31) was identified, with an insertion in a putative rctB gene. The Vibrio cholerae RctB protein is essential for replication initiation at the origin of chromosome II, oriCII. Using a plasmid-based system in E. coli we have identified the replication origin of chromosome II from P. profundum SS9 and have shown that the putative rctB gene, disrupted in FL31, is essential for oriCII function. Moreover, we found that a region corresponding to the V. cholerae oriCII incompatibility region (incII) exerts an inhibitory effect on P. profundum oriCII. The truncated rctB gene in FL31 confers insensitivity to incII inhibition, indicating that the C-terminus of RctB is important for the negative regulation of replication. The RctB proteins of V. cholerae and P. profundum are partially interchangeable, but full functionality is achieved only with the cognate origin. Our findings provide the first characterization of the replication origin of chromosome II in a deep-sea bacterium.

The Role of the N-Terminal Domains of Bacterial Initiator DnaA in the Assembly and Regulation of the Bacterial Replication Initiation Complex

The primary role of the bacterial protein DnaA is to initiate chromosomal replication. The DnaA protein binds to DNA at the origin of chromosomal replication (oriC) and assembles into a filament that unwinds double-stranded DNA. Through interaction with various other proteins, DnaA also controls the frequency and/or timing of chromosomal replication at the initiation step. Escherichia coli DnaA also recruits DnaB helicase, which is present in unwound single-stranded DNA and in turn recruits other protein machinery for replication. Additionally, DnaA regulates the expression of certain genes in E. coli and a few other species. Acting as a multifunctional factor, DnaA is composed of four domains that have distinct, mutually dependent roles. For example, C-terminal domain IV interacts with double-stranded DnaA boxes. Domain III drives ATP-dependent oligomerization, allowing the protein to form a filament that unwinds DNA and subsequently binds to and stabilizes single-stranded DNA in the initial replication bubble; this domain also interacts with multiple proteins that control oligomerization. Domain II constitutes a flexible linker between C-terminal domains III–IV and N-terminal domain I, which mediates intermolecular interactions between DnaA and binds to other proteins that affect DnaA activity and/or formation of the initiation complex. Of these four domains, the role of the N-terminus (domains I–II) in the assembly of the initiation complex is the least understood and appears to be the most species-dependent region of the protein. Thus, in this review, we focus on the function of the N-terminus of DnaA in orisome formation and the regulation of its activity in the initiation complex in different bacteria.

Recent Advances in Helicobacter pylori Replication: Possible Implications in Adaptation to a Pathogenic Lifestyle and Perspectives for Drug Design

DNA replication is an important step in the life cycle of every cell that ensures the continuous flow of genetic information from one generation to the next. In all organisms, chromosome replication must be coordinated with overall cell growth. Helicobacter pylori growth strongly depends on its interaction with the host, particularly with the gastric epithelium. Moreover, H. pylori actively searches for an optimal microniche within a stomach, and it has been shown that not every microniche equally supports growth of this bacterium. We postulate that besides nutrients, H. pylori senses different, unknown signals, which presumably also affect chromosome replication to maintain H. pylori propagation at optimal ratio allowing H. pylori to establish a chronic, lifelong infection. Thus, H. pylori chromosome replication and particularly the regulation of this process might be considered important for bacterial pathogenesis. Here, we summarize our current knowledge of chromosome and plasmid replication in H. pylori and discuss the mechanisms responsible for regulating this key cellular process. The results of extensive studies conducted thus far allow us to propose common and unique traits in H. pylori chromosome replication. Interestingly, the repertoire of proteins involved in replication in H. pylori is significantly different to that in E. coli, strongly suggesting that novel factors are engaged in H. pylori chromosome replication and could represent attractive drug targets.

'Modulation of the enzymatic activities of replicative helicase (DnaB) by interaction with Hp0897: a possible mechanism for helicase loading in Helicobacter pylori'

DNA replication in Helicobacter pylori is initiated from a unique site (oriC) on its chromosome where several proteins assemble to form a functional replisome. The assembly of H. pylori replication machinery is similar to that of the model gram negative bacterium Escherichia coli except for the absence of DnaC needed to recruit the hexameric DnaB helicase at the replisome assembly site. In the absence of an obvious DnaC homologue in H. pylori, the question arises as to whether HpDnaB helicase is loaded at the Hp-replication origin by itself or is assisted by other unidentified protein(s). A high-throughput yeast two-hybrid study has revealed two proteins of unknown functions (Hp0897 and Hp0340) that interact with HpDnaB. Here we demonstrate that Hp0897 interacts with HpDnaB helicase in vitro as well as in vivo. Furthermore, the interaction stimulates the DNA binding activity of HpDnaB and modulates its adenosine triphosphate hydrolysis and helicase activities significantly. Prior complex formation of Hp0897 and HpDnaB enhances the binding/loading of DnaB onto DNA. Hp0897, along with HpDnaB, colocalizes with replication complex at initiation but does not move with the replisome during elongation. Together, these results suggest a possible role of Hp0897 in loading of HpDnaB at oriC.

Choosing a suitable method for the identification of replication origins in microbial genomes

As the replication of genomic DNA is arguably the most important task performed by a cell and given that it is controlled at the initiation stage, the events that occur at the replication origin play a central role in the cell cycle. Making sense of DNA replication origins is important for improving our capacity to study cellular processes and functions in the regulation of gene expression, genome integrity in much finer detail. Thus, clearly comprehending the positions and sequences of replication origins which are fundamental to chromosome organization and duplication is the first priority of all. In view of such important roles of replication origins, tremendous work has been aimed at identifying and testing the specificity of replication origins. A number of computational tools based on various skew types have been developed to predict replication origins. Using various in silico approaches such as Ori-Finder, and databases such as DoriC, researchers have predicted the locations of replication origins sites for thousands of bacterial chromosomes and archaeal genomes. Based on the predicted results, we should choose an effective method for identifying and confirming the interactions at origins of replication. Here we describe the main existing experimental methods that aimed to determine the replication origin regions and list some of the many the practical applications of these methods.

oriC-encoded instructions for the initiation of bacterial chromosome replication

Replication of the bacterial chromosome initiates at a single origin of replication that is called oriC. This occurs via the concerted action of numerous proteins, including DnaA, which acts as an initiator. The origin sequences vary across species, but all bacterial oriCs contain the information necessary to guide assembly of the DnaA protein complex at oriC, triggering the unwinding of DNA and the beginning of replication. The requisite information is encoded in the unique arrangement of specific sequences called DnaA boxes, which form a framework for DnaA binding and assembly. Other crucial sequences of bacterial origin include DNA unwinding element (DUE, which designates the site at which oriC melts under the influence of DnaA) and binding sites for additional proteins that positively or negatively regulate the initiation process. In this review, we summarize our current knowledge and understanding of the information encoded in bacterial origins of chromosomal replication, particularly in the context of replication initiation and its regulation. We show that oriC encoded instructions allow not only for initiation but also for precise regulation of replication initiation and coordination of chromosomal replication with the cell cycle (also in response to environmental signals). We focus on Escherichia coli, and then expand our discussion to include several other microorganisms in which additional regulatory proteins have been recently shown to be involved in coordinating replication initiation to other cellular processes (e.g., Bacillus, Caulobacter, Helicobacter, Mycobacterium, and Streptomyces). We discuss diversity of bacterial oriC regions with the main focus on roles of individual DNA recognition sequences at oriC in binding the initiator and regulatory proteins as well as the overall impact of these proteins on the formation of initiation complex.

Assembly of Helicobacter pylori initiation complex is determined by sequence-specific and topology-sensitive DnaA-oriC interactions

In bacteria, chromosome replication is initiated by binding of the DnaA initiator protein to DnaA boxes located in the origin of chromosomal replication (oriC). This leads to DNA helix opening within the DNA-unwinding element. Helicobacter pylori oriC, the first bipartite origin identified in Gram-negative bacteria, contains two subregions, oriC1 and oriC2, flanking the dnaA gene. The DNA-unwinding element region is localized in the oriC2 subregion downstream of dnaA. Surprisingly, oriC2-DnaA interactions were shown to depend on DNA topology, which is unusual in bacteria but is similar to initiator-origin interactions observed in higher organisms. In this work, we identified three DnaA boxes in the oriC2 subregion, two of which were bound only as supercoiled DNA. We found that all three DnaA boxes play important roles in orisome assembly and subsequent DNA unwinding, but different functions can be assigned to individual boxes. This suggests that the H. pylori oriC may be functionally divided, similar to what was described recently for Escherichia coli oriC. On the basis of these results, we propose a model of initiation complex formation in H. pylori.

Intracellular locations of replication proteins and the origin of replication during chromosome duplication in the slowly growing human pathogen Helicobacter pylori

We followed the position of the replication complex in the pathogenic bacterium Helicobacter pylori using antibodies raised against the single-stranded DNA binding protein (HpSSB) and the replicative helicase (HpDnaB). The position of the replication origin, oriC, was also localized in growing cells by fluorescence in situ hybridization (FISH) with fluorescence-labeled DNA sequences adjacent to the origin. The replisome assembled at oriC near one of the cell poles, and the two forks moved together toward the cell center as replication progressed in the growing cell. Termination and resolution of the forks occurred near midcell, on one side of the septal membrane. The duplicated copies of oriC did not separate until late in elongation, when the daughter chromosomes segregated into bilobed nucleoids, suggesting sister chromatid cohesion at or near the oriC region. Components of the replication machinery, viz., HpDnaB and HpDnaG (DNA primase), were found associated with the cell membrane. A model for the assembly and location of the H. pylori replication machinery during chromosomal duplication is presented.

Crystal structure and mode of helicase binding of the C-terminal domain of primase from Helicobacter pylori

To better understand the poor conservation of the helicase binding domain of primases (DnaGs) among the eubacteria, we determined the crystal structure of the Helicobacter pylori DnaG C-terminal domain (HpDnaG-CTD) at 1.78 Å. The structure has a globular subdomain connected to a helical hairpin. Structural comparison has revealed that globular subdomains, despite the variation in number of helices, have broadly similar arrangements across the species, whereas helical hairpins show different orientations. Further, to study the helicase-primase interaction in H. pylori, a complex was modeled using the HpDnaG-CTD and HpDnaB-NTD (helicase) crystal structures using the Bacillus stearothermophilus BstDnaB-BstDnaG-CTD (helicase-primase) complex structure as a template. By using this model, a nonconserved critical residue Phe534 on helicase binding interface of DnaG-CTD was identified. Mutation guided by molecular dynamics, biophysical, and biochemical studies validated our model. We further concluded that species-specific helicase-primase interactions are influenced by electrostatic surface potentials apart from the critical hydrophobic surface residues.

Helicobacter pylori oriC--the first bipartite origin of chromosome replication in Gram-negative bacteria

Binding of the DnaA protein to oriC leads to DNA melting within the DNA unwinding element (DUE) and initiates replication of the bacterial chromosome. Helicobacter pylori oriC was previously identified as a region localized upstream of dnaA and containing a cluster of DnaA boxes bound by DnaA protein with a high affinity. However, no unwinding within the oriC sequence has been detected. Comprehensive in silico analysis presented in this work allowed us to identify an additional region (oriC2), separated from the original one (oriC1) by the dnaA gene. DnaA specifically binds both regions, but DnaA-dependent DNA unwinding occurs only within oriC2. Surprisingly, oriC2 is bound exclusively as supercoiled DNA, which directly shows the importance of the DNA topology in DnaA-oriC interactions, similarly as previously presented only for initiator-origin interactions in Archaea and some Eukaryota. We conclude that H. pylori oriC exhibits bipartite structure, being the first such origin discovered in a Gram-negative bacterium. The H. pylori mode of initiator-oriC interactions, with the loop formation between the subcomplexes of the discontinuous origin, resembles those discovered in Bacillus subtilis chromosome and in many plasmids, which might suggest a similar way of controlling initiation of replication.

Association of the chromosome replication initiator DnaA with the Escherichia coli inner membrane in vivo: quantity and mode of binding

DnaA initiates chromosome replication in most known bacteria and its activity is controlled so that this event occurs only once every cell division cycle. ATP in the active ATP-DnaA is hydrolyzed after initiation and the resulting ADP is replaced with ATP on the verge of the next initiation. Two putative recycling mechanisms depend on the binding of DnaA either to the membrane or to specific chromosomal sites, promoting nucleotide dissociation. While there is no doubt that DnaA interacts with artificial membranes in vitro, it is still controversial as to whether it binds the cytoplasmic membrane in vivo. In this work we looked for DnaA-membrane interaction in E. coli cells by employing cell fractionation with both native and fluorescent DnaA hybrids. We show that about 10% of cellular DnaA is reproducibly membrane-associated. This small fraction might be physiologically significant and represent the free DnaA available for initiation, rather than the vast majority bound to the datA reservoir. Using the combination of mCherry with a variety of DnaA fragments, we demonstrate that the membrane binding function is delocalized on the surface of the protein's domain III, rather than confined to a particular sequence. We propose a new binding-bending mechanism to explain the membrane-induced nucleotide release from DnaA. This mechanism would be fundamental to the initiation of replication.

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

DiaA/HobA and DnaA: a pair of proteins co-evolved to cooperate during bacterial orisome assembly

Replication of the bacterial chromosome is initiated by binding the DnaA protein to oriC. Various factors control the ability of DnaA to bind and unwind DNA. Among them, Escherichia coli DiaA and Helicobacter pylori HobA have been characterized recently. They were found to interact with domain I of DnaA and stimulate DnaA binding to oriC. We examined HobA and DiaA functional homology and showed that, despite a high degree of structural similarity, they are not interchangeable because they are unable to interact with heterologous DnaA proteins. We revealed particular structural differences impeding formation of heterologous complexes and, consistently, we restored DiaA-enhanced oriC binding by the hybrid Ec(I)-Hp(II-IV)DnaA protein; i.e. H. pylori DnaA in which domain I was exchanged with that of E. coli. This proved that DiaA and HobA are functional homologs and upon binding to DnaA they exert a similar effect on orisome formation. Interestingly, we showed for the first time that the dynamics of DiaA- and HobA-stimulated orisome assembly are different. HobA enhances and accelerates HpDnaA binding to oriC, whereas DiaA increases but decelerates EcDnaA binding with oriC. We postulate that the different dynamics of orisome formation reflect the distinct strategies adopted by E. coli and H. pylori to regulate the frequency of the replication of their chromosomes. DiaA/HobA homolog have been identified in many proteobacteria and therefore might constitute a common, though species-specific, factor modulating bacterial orisome assembly.

Helicobacter pylori chromosomal DNA replication: current status and future perspectives

Helicobacter pylori causes gastritis, gastric ulcer and gastric cancer. Though DNA replication and its control are central to bacterial proliferation, pathogenesis, virulence and/or dormancy, our knowledge of DNA synthesis in slow growing pathogenic bacteria like H. pylori is still preliminary. Here, we review the current understanding of DNA replication, replication restart and recombinational repair in H. pylori. Several differences have been identified between the H. pylori and Escherichia coli replication machineries including the absence of DnaC, the helicase loader usually conserved in gram-negative bacteria. These differences suggest different mechanisms of DNA replication at initiation and restart of stalled forks in H. pylori.

Identification of replication origins in prokaryotic genomes

The availability of hundreds of complete bacterial genomes has created new challenges and simultaneously opportunities for bioinformatics. In the area of statistical analysis of genomic sequences, the studies of nucleotide compositional bias and gene bias between strands and replichores paved way to the development of tools for prediction of bacterial replication origins. Only a few (about 20) origin regions for eubacteria and archaea have been proven experimentally. One reason for that may be that this is now considered as an essentially bioinformatics problem, where predictions are sufficiently reliable not to run labor-intensive experiments, unless specifically needed. Here we describe the main existing approaches to the identification of replication origin (oriC) and termination (terC) loci in prokaryotic chromosomes and characterize a number of computational tools based on various skew types and other types of evidence. We also classify the eubacterial and archaeal chromosomes by predictability of their replication origins using skew plots. Finally, we discuss possible combined approaches to the identification of the oriC sites that may be used to improve the prediction tools, in particular, the analysis of DnaA binding sites using the comparative genomic methods.

Structural similarity between the DnaA-binding proteins HobA (HP1230) from Helicobacter pylori and DiaA from Escherichia coli

In prokaryotes, DNA replication is initiated by the binding of DnaA to the oriC region of the chromosome to load the primosome machinery and start a new replication round. Several proteins control these events in Escherichia coli to ensure that replication is precisely timed during the cell cycle. Here, we report the crystal structure of HobA (HP1230) at 1.7 A, a recently discovered protein that specifically interacts with DnaA protein from Helicobacter pylori (HpDnaA). We found that the closest structural homologue of HobA is a sugar isomerase (SIS) domain containing protein, the phosphoheptose isomerase from Pseudomonas aeruginosa. Remarkably, SIS proteins share strong sequence homology with DiaA from E. coli; yet, HobA and DiaA share no sequence homology. Thus, by solving the structure of HobA, we unexpectedly discovered that HobA is a H. pylori structural homologue of DiaA. By comparing the structure of HobA to a homology model of DiaA, we identified conserved, surface-accessible residues that could be involved in protein-protein interaction. Finally, we show that HobA specifically interacts with the N-terminal part of HpDnaA. The structural homology between DiaA and HobA strongly supports their involvement in the replication process and these proteins could define a new structural family of replication regulators in bacteria.

HobA ? a novel protein involved in initiation of chromosomal replication in Helicobacter pylori

Replication of the bacterial chromosome is initiated by the binding of the DnaA protein to a unique DNA region, called oriC. Many regulatory factors in numerous species act by controlling the ability of DnaA to bind and unwind DNA, but the Helicobacter pylori genome does not contain homologues to any of these factors. Here, we describe HobA, a novel protein essential for initiation of H. pylori chromosome replication, which is conserved among, and unique to, epsilon proteobacteria. We demonstrate that HobA interacts specifically via DnaA with the oriC-DnaA complex. We postulate that HobA is essential for correct formation and stabilization of the orisome by facilitating the spatial positioning of DnaA at oriC. Consistent with its function, overexpression of hobA had no effect on growth of H. pylori, whereas depletion of HobA led to growth arrest and failure to initiate replication. In conclusion, HobA may be the first identified of a new group of initiation factors common to epsilon proteobacteria.

Mechanism for the TtDnaA-Tt-oriC cooperative interaction at high temperature and duplex opening at an unusual AT-rich region in Thermoanaerobacter tengcongensis

Thermoanaerobacter tengcongensis is an anaerobic low-GC thermophilic bacterium. To further elucidate the replication initiation of chromosomal DNA at high temperature, the interaction between the replication initiator (TtDnaA) and the putative origin (Tt-oriC) in this thermophile was investigated. We found that efficient binding of TtDnaA to Tt-oriC at high temperature requires (i) at least two neighboring DnaA boxes, (ii) the specific feature of the TtDnaA Domain IV and (iii) the self-oligomerization of TtDnaA. Replacement of the TtDnaA Domain IV by the counterpart of Escherichia coli DnaA or disruption of its oligomerization by amino acid mutations (W9A/L20S) abolished the oriC-binding activity of TtDnaA at 60 degrees C, but not at 37 degrees C. Moreover, ATP-TtDnaA, but not ADP-TtDnaA or the oligomerization-deficient mutants was able to unwind the Tt-oriC duplex. The minimal oriC required for this duplex opening in vitro was demonstrated to consist of DnaA boxes 1-8 and an unusual AT-rich region. Interestingly, although no typical ATP-DnaA box was found in this AT-rich region, it was exclusively bound by ATP-TtDnaA and acted as the duplex-opening and replication-initiation site. Taken together, we propose that oligomerization of ATP-DnaA and simultaneously binding of several DnaA boxes and/or AT-rich region may be generally required in replication initiation at high temperature.

A simplified method for purification of recombinant soluble DnaA proteins

An improved, simplified method for the purification of recombinant, tagged DnaA proteins is described. The presented protocol allowed us to purify soluble DnaA proteins from two different bacterial species: Helicobacter pylori and Streptomyces coelicolor, but it can most likely also be used for the isolation of DnaA proteins from other bacteria, as it was adapted for Mycobacterium tuberculosis DnaA. The isolation procedure consists of protein precipitation with ammonium sulphate followed by affinity chromatography. The composition of the buffers used at each purification step is crucial for the successful isolation of the recombinant DnaA proteins. The universality of the method in terms of its application to differently tagged proteins (His-tagged or GST-tagged) as well as different properties of purified proteins (e.g., highly aggregating truncated forms) makes the protocol highly useful for all studies requiring purified and active DnaA proteins.

Architecture of bacterial replication initiation complexes: orisomes from four unrelated bacteria

Bacterial chromosome replication is mediated by single initiator protein, DnaA, that interacts specifically with multiple DnaA boxes located within the origin (oriC). We compared the architecture of the DnaA-origin complexes of evolutionarily distantly related eubacteria: two Gram-negative organisms, Escherichia coli and Helicobacter pylori, and two Gram-positive organisms, Mycobacterium tuberculosis and Streptomyces coelicolor. Their origins vary in size (from approx. 200 to 1000 bp) and number of DnaA boxes (from 5 to 19). The results indicate that: (i) different DnaA proteins exhibit various affinities toward single DnaA boxes, (ii) spatial arrangement of two DnaA boxes is crucial for the H. pylori and S. coelicolor DnaA proteins, but not for E. coli and M. tuberculosis proteins, and (iii) the oriC regions are optimally adjusted to their cognate DnaA proteins. The primary functions of multiple DnaA boxes are to determine the positioning and order of assembly of the DnaA molecules. Gradual transition from the sequence-specific binding of the DnaA protein to binding through co-operative protein-protein interactions seems to be a common conserved strategy to generate oligomeric initiator complexes bound to multiple sites within the chromosomal, plasmid and virial origins.

Chromosomal replication and the cell membrane

The importance of the cell membrane in bacterial chromosomal replication continues to emerge. Recent advances include better definition of the biochemical interaction between membrane acidic phospholipids and the replication initiator, DnaA protein, the physiological impact that an altered membrane lipid composition has on chromosomal replication and the identification and characterization of recently identified membrane-associated proteins that regulate replication and participate in chromosomal segregation.

Mycobacterium tuberculosis DnaA initiator protein: purification and DNA-binding requirements

The Mycobacterium tuberculosis oriC (the origin of chromosomal replication) region contains 13 non-perfect DnaA boxes. The M. tuberculosis initiator protein, DnaA, was overexpressed in Escherichia coli as a soluble His-tagged fusion protein. The purified protein His6MtDnaA was investigated for its binding properties to DnaA boxes from the oriC region. Gel retardation demonstrated that the DnaA from M. tuberculosis requires two DnaA boxes for efficient binding. Electron microscopy as well as DNase I footprinting showed that the His6MtDnaA protein binds to four specific regions, which correspond to the location of 11 out of 13 previously identified DnaA boxes within the M. tuberculosis oriC. Probably, in M. tuberculosis, DnaA molecules by co-operative binding of numerous 'non-perfect' DnaA boxes assemble along the oriC region and subsequently form a massive nucleoprotein complex.

Survey of the year 2003 commercial optical biosensor literature

In the year 2003 there was a 17% increase in the number of publications citing work performed using optical biosensor technology compared with the previous year. We collated the 962 total papers for 2003, identified the geographical regions where the work was performed, highlighted the instrument types on which it was carried out, and segregated the papers by biological system. In this overview, we spotlight 13 papers that should be on everyone's 'must read' list for 2003 and provide examples of how to identify and interpret high-quality biosensor data. Although we still find that the literature is replete with poorly performed experiments, over-interpreted results and a general lack of understanding of data analysis, we are optimistic that these shortcomings will be addressed as biosensor technology continues to mature.

Where does bacterial replication start? Rules for predicting the oriC region

Three methods, based on DNA asymmetry, the distribution of DnaA boxes and dnaA gene location, were applied to identify the putative replication origins in 120 chromosomes. The chromosomes were classified according to the agreement of these methods and the applicability of these methods was evaluated. DNA asymmetry is the most universal method of putative oriC identification in bacterial chromosomes, but it should be applied together with other methods to achieve better prediction. The three methods identify the same region as a putative origin in all Bacilli and Clostridia, many Actinobacteria and gamma Proteobacteria. The organization of clusters of DnaA boxes was analysed in detail. For 76 chromosomes, a DNA fragment containing multiple DnaA boxes was identified as a putative origin region. Most bacterial chromosomes exhibit an overrepresentation of DnaA boxes; many of them contain at least two clusters of DnaA boxes in the vicinity of the oriC region. The additional clusters of DnaA boxes are probably involved in controlling replication initiation. Surprisingly, the characteristic features of the initiation of replication, i.e. a cluster of DnaA boxes, a dnaA gene and a switch in asymmetry, were not found in some of the analysed chromosomes, particularly those of obligatory intracellular parasites or endosymbionts. This is presumably connected with many mechanisms disturbing DNA asymmetry, translocation or disappearance of the dnaA gene and decay of the Escherichia coli perfect DnaA box pattern.