Removal of methylene blue by using sodium alginate-based hydrogel; validation of experimental findings via DFT calculations

Temperature effects and molecular insights towards the optimization of polyvinyl alcohol as adsorbent of organic pollutants from aqueous solution

One of the easier methods of wastewater treatment is adsorption due to its simplicity in implementation, environmental friendliness, and economic feasibility. Polyvinyl alcohol (PVA) looks promising as an adsorbent due to its biocompatible, non-toxic, water-soluble and eco-friendly nature. The investigation of PVA for its potential in the adsorption of pollutants has been reported in many studies but the mechanistic understanding of the adsorption is poor. The present study used a theoretical approach through density functional theory and Monte Carlo with molecular dynamics simulations to investigate the adsorption mechanism behaviors of model organic molecules (bromothymol blue (BTB), methylene blue (MB), metronidazole (MNZ) and tetracycline (TC)) on PVA surface. The quantum chemical calculations result showed that with the increase in PVA chains (2, 4, 8, 16, and 32 units), the zero-point energy decreases (from -308.79 to -4922.93 kcal/mol) while the dipole moment increases (from 4.37 to 87.52 Debye). Temperature effect on the PVA chain structures showed the same trends for all the chain units and with the increase in temperature (50-600 K), there are no appreciable changes in zero-point energy, enthalpy energy increases while Gibbs free energy decreases. Considering PVA-pollutant complexes, the effects of temperature on the structures showed that there are no appreciable changes in the zero-point energy, Gibbs free and thermal energies increase with an increase in temperature while the kinetic rate of reactions decreases with an increase in temperature. The enthalpy of the reaction showed different trends with antibiotic and dye complexes. In all the thermodynamic properties investigated and the rate of reaction, the order of affinity of the pollutants with PVA followed TC > MNZ > MB > BTB. Monte Carlo simulation was used to investigate the adsorption behavior of the pollutants on the surface of PVA. The negative adsorption energies (-366.56 to -2266.81 kcal/mol) in terms of affinity towards the pollutants on the surface of PVA followed the sequence TC > MNZ > BTB > MB and the molecular dynamic simulation results followed the same order. The obtained results give valuable insights into the mechanism and performance of PVA as an adsorbent. Most of these computational observations are in good agreement with the available experimental results.

Rheological Properties and Inkjet Printability of a Green Silver-Based Conductive Ink for Wearable Flexible Textile Antennas

The development of e-textiles necessitates the creation of highly conductive inks that are compatible with precise inkjet printing, which remains a key challenge. This work presents an innovative, syringe-based method to optimize a novel bio-sourced silver ink for inkjet printing on textiles. We investigate the relationships between inks' composition, rheological properties, and printing behavior, ultimately assessing the electrical performance of the fabricated circuits. Using Na-alginate and polyethylene glycol (PEG) as the suspension matrix, we demonstrate their viscosity depends on the component ratios. Rheological control of the silver nanoparticle-laden ink has become paramount for uniform printing on textiles. A specific formulation (3 wt.% AgNPs, 20 wt.% Na-alginate, 40 wt.% PEG, and 40 wt.% solvent) exhibits the optimal rheology, enabling the printing of 0.1 mm thick conductive lines with a low resistivity (8 × 10-3 Ω/cm). Our findings pave the way for designing eco-friendly ink formulations that are suitable for inkjet printing flexible antennas and other electronic circuits onto textiles, opening up exciting possibilities for the next generation of E-textiles.

Green magnetic carbon/alginate biocomposite beads from iron scrap waste for efficient removal of textile dye and heavy metal

The circular economy can help enhance the value of industrial waste and remediate the environment. This study considers the application of iron scrap from steel production as a free resource to produce magnetic adsorbent beads to remove methylene blue dye and lead (II) ions from wastewater. Composite beads were prepared by incorporating iron scrap and activated carbon into a calcium alginate gel using a simple 'mix and drop' synthesis. The optimized magnetic beads were stable and offered a large specific surface area. The maximum adsorption capacity of the adsorbent, calculated from the Langmuir isotherm model, was 476.19 mg g-1 for methylene blue and 163.93 mg g-1 for lead (II) ions. This study places emphasis upon the zero-waste principle and employs a scalable synthetic approach for the conversion of waste iron scrap into an adsorbent material capable of delivering significant environmental benefits.

Theoretical design of transition metal-doped oxo-triarylmethyl as a disposable platform for adsorption of ibuprofen

Emerging environmental contaminants have become a crucial environmental issue because of the highly toxic effluents emitted by factories. Ibuprofen (IBP), as a typical anti-inflammatory drug, is frequently detected in water sources. Therefore, its removal using various adsorbents has drawn great interest. Herein, the structural, electronic, energetic, and optical properties of pristine oxo-triarylmethyl (oxTAM) and transition metal-doped oxo-triarylmethyl (TM@oxTAM, TM = Sc, Ti, V, Cr, and Mn) for adsorption of the IBU drug were investigated using density functional theory (DFT) calculations implemented in Gaussian and VASP codes. Frontier molecular orbital (FMO), density of states (DOS), and electronic band structure results demonstrated that transition metal-doped oxTAM causes a significant reduction in the energy band gap (Eg) value of pristine oxTAM, with the highest decrease (30.14 %) in the case of Mn@oxTAM. It was found that transition metal doping onto oxTAM leads to an increase in the adsorption energies (1.20-2.64 eV) and charge density between transition metal and IBU. Natural bond orbital (NBO) analysis revealed that charge was effectively transferred from the IBU towards the transition metal, which was further analyzed by charge decomposition analysis (CDA). Furthermore, quantum theory of atoms in molecules (QTAIM), interaction region indicator (IRI), electron localization function (ELF), and radial distribution function (RDF) analyses revealed that the IBU is adsorbed on the Sc@oxTAM surface via covalent interactions, while electrostatic with partially covalent interactions are dominated in other IBU/TM@oxTAM complexes. The results suggest that TM doping on the oxTAM provides a new insight for developing photocatalyst-based covalent organic frameworks (COFs) to remove emerging pollutants in wastewater.

Novel chair graphene nanotubes as adsorbing medium for alanine and asparagine amino acids - A DFT outlook

Amino acids are required to make protein. The deficiency of amino acids leads to a lack of sleep and mood. Among various amino acids, we conducted the adsorption studies of alanine and asparagine amino acids on a novel one-dimensional material, chair graphene nanotube. The stability of the chair graphene nanotube is ensured with the negative formation energy, which is -6.490 eV/atom. The energy band gap of bare chair graphene nanotube is 1.022 eV, which possesses a semiconductor nature. The stable chair graphene nanotube is used as adsorbing material for alanine and asparagine amino acids. Besides, alanine and asparagine are physisorbed on chair graphene nanotubes that are confirmed by the range of adsorption energy from -0.107 eV to -0.718 eV. Upon adsorption of amino acids, the charge transfer outcome shows that chair graphene nanotubes behave as donors of electrons to alanine and asparagine. Further, the changes in the band gap of the chair graphene nanotube are noticed from the results of band structure and PDOS spectrum. The changes in the electron density also reveal the changes in the electronic properties of the chair graphene nanotube owing to alanine and asparagine sorption. The proposed report portrays the adsorption attributes of alanine and asparagine amino acids on 1D chair graphene nanotubes.

Green preparation of magnetic ferroferric oxide-polyvinyl alcohol-alginate coated UiO-67 nanospheres: Characterization, adsorption properties and adsorption mechanism of methylene blue

In this paper, a kind of magnetic ferric oxide/polyvinyl alcohol/calcium alginate/UiO-67 (Fe3O4/PVA/CA/UiO-67) nanospheres with homogeneous surface interconnecting structures was prepared by using macromolecular polymer polyvinyl alcohol and sodium alginate as carriers and zirconium organic skeleton as nanocrystals. The properties of magnetic nanospheres were studied by SEM, FT-IR, TGA, XRD, BET, VSM and Zeta potential. The impression of diverse temperatures, MB concentrations, interaction time, pH, and magnetic aerogel sphere dose on MB removal was studied. The optimum adsorption temperature and pH of magnetic nanospheres for MB were 298 K, and 10, respectively. Langmuir simulated that the maximum removal of MB by magnetic nanospheres at room temperature (298 K) was 1371.8 mg/g. The removal of MB by magnetic nanospheres complied with the pseudo-first-order kinetic model. The isotherm simulation can infer that the Langmuir model was more comply with MB adsorption on magnetic aerogel spheres. Thermodynamic studies have confirmed that the removal of MB by magnetic nanospheres was exothermic and spontaneous. The interaction mechanism of MB on magnetic nanospheres can be deduced by FT-IR and BET, including hydrogen bond, π-π bond, electrostatic interaction, and mesoporous pore flow. The removal rate of nanospheres for MB still reached 70.06 % after six cycles.

Modified alginate materials for wastewater treatment: Application prospects

Sodium alginate is a natural macromolecule widely used because of its abundance, low cost of acquisition, and rich hydroxyl and carboxyl groups in the matrix. The physical modification of sodium alginate can be made by blending it with polymer materials. The so-yielded alginate complex is commonly unstable in an aqueous environment due to alginate backbones' high hydrophilicity. The chemical modification can remove its hydrophilic groups and introduce special functional groups or polymers onto the alginate backbones to provide excess reaction sites for specific reactions and effective complexation sites for accommodating antibiotics, dyes, heavy metal ions, and radioactive elements. Sodium alginate has been used in water treatment engineering under revised modification protocols. This article also reviews the latest modification protocols for sodium alginate and outlines the novel application of the modified materials. The limitations of modified sodium alginate materials are described, and research prospects are put forward.