Green magnetic carbon/alginate biocomposite beads from iron scrap waste for efficient removal of textile dye and heavy metal

The circular economy can help enhance the value of industrial waste and remediate the environment. This study considers the application of iron scrap from steel production as a free resource to produce magnetic adsorbent beads to remove methylene blue dye and lead (II) ions from wastewater. Composite beads were prepared by incorporating iron scrap and activated carbon into a calcium alginate gel using a simple 'mix and drop' synthesis. The optimized magnetic beads were stable and offered a large specific surface area. The maximum adsorption capacity of the adsorbent, calculated from the Langmuir isotherm model, was 476.19 mg g-1 for methylene blue and 163.93 mg g-1 for lead (II) ions. This study places emphasis upon the zero-waste principle and employs a scalable synthetic approach for the conversion of waste iron scrap into an adsorbent material capable of delivering significant environmental benefits.

Aqueous-phase Selective Hydrogenation of Furfural to Furfuryl Alcohol over Ordered-mesoporous Carbon Supported Pt Catalysts Prepared by One-step Modified Soft-template Self-assembly Method

Ordered mesoporous carbon (OMC) has attracted a great deal of attention as catalyst support due to their tunable morphological and textural properties. In this study, the characteristics and catalytic properties of OMC-supported Pt catalysts prepared by one-step modified soft-template self-assembly method (Pt/OMC-one-pot) were compared to the Pt impregnated on OMC, activated carbon (AC), and non-uniform meso/macroporous carbon (MC) in the selective hydrogenation of furfural to furfuryl alcohol (FA) under mild conditions (50°C, 2 MPa H₂). Larger Pt particle size (~4 nm) was obtained on the Pt/OMC-onepot comparing to all the impregnated ones, in which the Pt particle sizes were in the range 0.5 - 2 nm. Reduction step was not necessary on the Pt/OMC-one-pot and among the catalysts studied, the Pt/OMCone-pot exhibited the highest furfural conversion and FA selectivity under aqueous conditions. The use of methanol as the solvent resulted in the formation of solvent product (2-furaldehyde dimethyl acetal) instead. The amount of Pt being deposited, location of Pt particles, and metal-support interaction strongly affected recyclability of the catalysts because some larger size Pt particles with weak metal-support interaction could be leached out during the liquid-phase reaction, rendering similar catalytic performances of the various porous carbon supported catalysts after the 3^rd cycle of run.

Facile preparation protocol of magnetic mesoporous carbon acid catalysts via soft-template self-assembly method and their applications in conversion of xylose into furfural

Furfural is a valuable dehydration product of xylose. It has a broad spectrum of industrial applications. Various catalysts containing SO₃H have been reported for the conversion of xylose into furfural. Nevertheless, the multi-step preparation is tedious, and the catalysts are usually fine powders that are difficult to separate from the suspension. Novel magnetic mesoporous carbonaceous materials (Fe/MC) were successfully prepared via facile self-assembly in a single step. A facile subsequent hydrothermal sulfonation of Fe/MC with concentrated H₂SO₄ at 180°C gave mesoporous carbon bearing SO₃H groups (SO₃H@Fe/MC) without loss of the magnetic properties. Various techniques were employed to characterize the SO₃H@Fe/MC as a candidate catalyst. It showed strong magnetism due to its Fe particles and possessed a 243 m² g^-1 BET-specific surface area and a 90% mesopore volume. The sample contained 0.21 mmol g^-1 of SO₃H and gave a high conversion and an acceptable furfural yield and selectivity (100%, 45% and 45%, respectively) when used at 170°C for 1 h with γ-valerolactone as solvent. The catalyst was easily separated after the catalytic tests by using a magnet, confirming sufficient magneticstability. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.

Greener Monolithic Solid Phase Extraction Biosorbent Based on Calcium Cross-Linked Starch Cryogel Composite Graphene Oxide Nanoparticles for Benzo(a)pyrene Analysis

Benzo(a)pyrene (BaP) has been recognized as a marker for the detection of carcinogenic polycyclic aromatic hydrocarbons. In this work, a novel monolithic solid-phase extraction (SPE) sorbent based on graphene oxide nanoparticles (GO) in starch-based cryogel composite (GO-Cry) was successfully prepared for BaP analysis. Rice flour and tapioca starch (gel precursors) were gelatinized in limewater (cross-linker) under alkaline conditions before addition of GO (filler) that can increase the ability to extract BaP up to 2.6-fold. BaP analysis had a linear range of 10 to 1000 µgL-1 with good linearity (R2 = 0.9971) and high sensitivity (4.1 ± 0.1 a.u./(µgL-1)). The limit of detection and limit of quantification were 4.21 ± 0.06 and 14.04 ± 0.19 µgL-1, respectively, with excellent precision (0.17 to 2.45%RSD). The accuracy in terms of recovery from spiked samples was in the range of 84 to 110% with no significant difference to a C18 cartridge. GO-Cry can be reproducibly prepared with 2.8%RSD from 4 lots and can be reused at least 10 times, which not only helps reduce the analysis costs (~0.41USD per analysis), but also reduces the resultant waste to the environment.

Zingiber cassumunar Roxb. Essential Oil-Loaded Electrospun Poly(lactic acid)/Poly(ethylene oxide) Fiber Blend Membrane for Antibacterial Wound Dressing Application

The essential oil from Zingiber cassumunar Roxb. (Plai) has long been used in Thai herbal remedies to treat inflammation, pains, sprains, and wounds. It was therefore loaded into an electrospun fibrous membrane for use as an analgesic and antibacterial dressing for wound care. The polymer blend between poly(lactic acid) and poly(ethylene oxide) was selected as the material of choice because its wettability can be easily tuned by changing the blend ratio. Increasing the hydrophilicity and water uptake ability of the material while retaining its structural integrity and porosity provides moisture balance and removes excess exudates, thereby promoting wound healing. The effect of the blend ratio on the fiber morphology and wettability was investigated using scanning electron microscopy (SEM) and contact angle measurement, respectively. The structural determination of the prepared membranes was conducted using Fourier-transform infrared spectroscopy (FTIR). The release behavior of (E)-1-(3,4-dimethoxyphenyl) butadiene (DMPBD), a marker molecule with potent anti-inflammatory activity from the fiber blend, showed a controlled release characteristic. The essential oil-loaded electrospun membrane also showed antibacterial activity against S. aureus and E. coli. It also exhibited no toxicity to both human fibroblast and keratinocyte cells, suggesting that the prepared material is suitable for wound dressing application.

Magnetic carbon nanofiber composite adsorbent through green in-situ conversion of bacterial cellulose for highly efficient removal of bisphenol A

A magnetic carbon nanofiber sorbent was facilely synthesized from bio-based bacterial cellulose and FeCl₃via impregnation, freeze-drying, followed by pyrolysis at 700 °C, without additional activation or nanofiber fabrication. The obtained material possessed intrinsic 3D naturally fibrous and porous structure with good magnetization. The adsorption results showed that the adsorption capacity of the prepared adsorbent towards bisphenol A (BPA) was as high as 618 mg/g, outperforming other adsorbents. Moreover, recycling the adsorbent for 10 consecutive cycles retained 96% of initial adsorption efficiency. The magnetic sorbent can maintain good magnetic properties even with recycling. Hence, the use of bacterial cellulose as a renewable carbon nanofiber precursor and FeCl₃ as a source of magnetic particles, and a green pore generating agent in the present protocol, lead to a superior magnetic carbon nanofiber adsorbent with sustainable characteristics.

Green and sustainable zero-waste conversion of water hyacinth (Eichhornia crassipes) into superior magnetic carbon composite adsorbents and supercapacitor electrodes

Our facile approach converts embarrassing weed to value-added products through environmentally friendly routes towards zero-waste scheme.

A screen-printed carbon electrode modified with gold nanoparticles, poly(3,4-ethylenedioxythiophene), poly(styrene sulfonate) and a molecular imprint for voltammetric determination of nitrofurantoin

A molecularly imprinted polymer (MIP) and a nanocomposite prepared from gold nanoparticles (AuNP) and poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT:PSS) were deposited on a screen-printed carbon electrode (SPCE). The nanocomposite was prepared by one-pot simultaneous in-situ formation of AuNPs and PEDOT:PSS and was then inkjet-coated onto the SPCE. The MIP film was subsequently placed on the modified SPCE by co-electrodeposition of o-phenylenediamine and resorcinol in the presence of the antibiotic nitrofurantoin (NFT). Using differential pulse voltammetry (DPV), response at the potential of ~ 0.1 V (vs. Ag/AgCl) is linear in 1 nM to 1000 nM NFT concentration range, with a remarkably low detection limit (at S/N = 3) of 0.1 nM. This is two orders of magnitude lower than that of the control MIP sensor without the nanocomposite interlayer, thus showing the beneficial effect of AuNP-PEDOT:PSS. The electrode is highly reproducible (relative standard deviation 3.1% for n = 6) and selective over structurally related molecules. It can be re-used for at least ten times and was found to be stable for at least 45 days. It was successfully applied to the determination of NFT in (spiked) feed matrices and gave good recoveries. Graphical abstract Schematic representation of a voltammetric sensor for the determination of nitrofurantoin. The sensor is based on a screen-printed carbon electrode (SPCE) modified with an inkjet-printed gold nanoparticles-poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) nanocomposite and a molecularly imprinted polymer.

Magnetic carbon composites with a hierarchical structure for adsorption of tetracycline, prepared from sugarcane bagasse via hydrothermal carbonization coupled with simple heat treatment process

Sugarcane bagasse, an agricultural waste, was successfully converted into novel magnetic carbon composites by low temperature hydrothermal carbonization at 230°C for 24h, followed by heat treatment at 400°C for only 1h in air. Effects of NaOH and iron loading on the chemical properties of the composites were studied. In addition, various techniques were employed to investigate the physicochemical properties of the composites. Adsorption kinetics and isotherms were investigated with tetracycline (TC) for the magnetic composites. The magnetic carbon composite exhibited 48.35mg/g maximum adsorption capacity and was highly stable chemically and mechanically, with also good magnetic properties. The adsorption of TC by the magnetic adsorbent was mainly attributed to H-bonds and π-π interactions. The results indicate that waste sugarcane bagasse from the sugar industries can be efficiently transformed to a magnetic adsorbent for TC removal via a facile environmentally friendly method.

New triblock copolymer templates, PEO-PB-PEO, for the synthesis of titania films with controlled mesopore size, wall thickness, and bimodal porosity

The synthesis and properties of a series of new structure-directing triblock copolymers with PEO-PB-PEO structure (PEO = poly(ethylene oxide) and PB = polybutadiene) and their application as superior pore-templates for the preparation of mesoporous titania coatings are reported. Starting from either TiCl4 or from preformed TiO2 nanocrystalline building blocks, mesoporous crystalline titanium oxide films with a significant degree of mesoscopic ordered pores are derived, and the pore size can be controlled by the molecular mass of the template polymer. Moreover, the triblock copolymers form stable micelles already at very low concentration, i.e., prior to solvent evaporation during the evaporation-induced self-assembly process (EISA). Consequently, the thickness of pore walls can be controlled independently of pore size by changing the polymer-to-precursor ratio. Thus, unprecedented control of wall thickness in the structure of mesoporous oxide coatings is achieved. In addition, the micelle formation of the new template polymers is sufficiently distinct from that of typical commercial PPO-PEO-PPO polymers (Pluronics; PPO = poly(propylene oxide)), so that a combination of both polymers facilitates bimodal porosity via dual micelle templating.