A Micro–Computed Tomographic Analysis of Wall Thickness of C-shaped Canals in Mandibular First Premolars

Micro-Computed Tomographic Analysis of Radicular Dentin Thickness in Mandibular Second Molars Across Diverse Anatomic Root Variations: Identifying Potential Danger Zones

INTRODUCTION

This study aimed to investigate radicular dentin thicknesses in mandibular second molars (MSMs), considering variations in root configuration and the morphology of the pulp chamber floor (PCF). The types of radicular grooves and potential danger zones were also identified.

METHODS

A total of 149 MSMs were scanned with micro-computed tomographic imaging and classified into 4 groups according to root fusion and PCF morphology as follows: (1) 45 with fused roots and C-shaped PCFs, (2) 45 with fused roots and non-C-shaped PCFs, (3) 14 with a single canal, and (4) 45 with separated roots. The first 2 groups were subdivided into Ω-shaped, U-shaped, and V-shaped radicular groove subgroups. Measurements included minimum and mean dentin thickness from the start of the radicular groove or root bifurcation extending 5 mm apically, the ratio of outer to inner dentin thickness, and the distribution of dentin thickness.

RESULTS

Ω-shaped and U-shaped subgroups showed significant thinner minimum inner wall thickness than V-shaped subgroups at 2-5 mm from the starting point of the radicular groove in both C-shaped and non-C-shaped pulp floor categories (P < .05). The mesial roots of separated rooted MSMs showed significant thinner dentin than a non-C-shaped floor regarding minimum and mean inner thickness and mean outer thickness (P < .05). Teeth with a single canal had significantly thicker walls compared with the other 3 groups.

CONCLUSIONS

In MSMs, caution must be exercised, especially in the presence of Ω-shaped and U-shaped grooves in C-shaped roots and around the root furcation of separated roots.

Prevalence and morphology of different root canal systems in mandibular premolars: a cross-sectional observational study

BACKGROUND

This study investigated the prevalence and morphology of C-shaped and non-C-shaped root canal systems in permanent mandibular first (PM1) and second (PM2) premolars using retrospective analysis of cone-beam computed tomography (CBCT) scans, and panoramic radiographs.

METHODS

CBCT scans from 2000 patients were screened for the presence of premolars with C-shaped canals and then assessed at three axial levels to determine the canal classification. The teeth were also assessed for Vertucci configuration, number of roots, and radicular grooves. Pre-existing panoramic radiographs were evaluated to identify features specific to PM1/2 with multiple canals or C-shaped anatomy.

RESULTS

A total of 1576 PM1 and 1424 PM2 from 880 patients were evaluated. The overall prevalence of C-shaped canals was 2.2% (3.3% PM1, 1.0% PM2), with 49 (5.6%) patients presenting with at least one C-shaped mandibular premolar. There were 2.3 ± 0.6 and 2.4 ± 0.5 different classifiable cross-sections per tooth for PM1 and PM2, respectively. The sudden disappearance or bifurcation of a canal on panoramic radiographs was associated with the presence of multiple canals (P < 0.001) or C-shaped anatomy (P = 0.03).

CONCLUSIONS

There was substantial variation in cross-sectional anatomy within and between C-shaped premolars, which will affect endodontic treatment planning. © 2023 Australian Dental Association.

CBCT and Micro-CT analysis of the mandibular first premolars with C-shaped canal system in a Chinese population author

OBJECTIVES

The purpose of this study was to survey the prevalence of C-shaped root canal system in mandibular first premolar in Chinese population by reading Cone-beam computed tomography (CBCT) images and to analyze its anatomical characteristics by CBCT and Micro-computed tomography (Micro-CT).

METHODS AND MATERIALS

The prevalence and the morphologic features of C-shaped root canal system were evaluated by observing CBCT images of 760 patients (1520 mandibular first premolars). 66 mandibular first premolars with C-shaped root canal system were scanned by Micro-CT. The morphologic features including radicular groove, C-shaped root canal categories in the cross-sections and in the 3D models, accessory and connecting canals, apical foramina and accessory foramina, were analyzed using image software.

RESULTS

C-shaped root canal system was identified in 16.9% of mandibular first premolars. The minimum mesial wall thickness most commonly occurred at the lingual site (69.7%). Regarding to the cross-sectional classification, the maximum was C2 (41.5%). In the 3D classification, the most common was S (34.8%). Accessory canals were observed in 36.4% of the samples and occurred mostly in the middle and apical regions. 42.4% samples had 1-3 variable connecting canals, and 40.9% samples had only one apical foramen.

CONCLUSIONS

The incidence of C-shaped root canal system in mandibular first premolars was 16.9% in the Chinese population. The anatomy was very complex and variable, mostly distributed in the middle and apical regions of the root canal. The mesial wall of C-shaped canal was extremely thin on the lingual side.

Finding appropriate nickel-titanium instruments for lingual canals in mandibular first premolars with two canals: A micro-CT study

This study aimed to find appropriate nickel-titanium instruments for lingual canals in mandibular first premolars with two canals. Forty-two extracted mandibular first premolars with lingual canals (Vertucci type V) verified by micro-CT scanning were selected. The teeth were randomly divided into three groups, and their lingual canals were instrumented by M3, HyFlex CM and XP-endo Shaper, respectively. After instrumentation, the canal morphology was scanned again by micro-CT. The canal morphologies of pre- and post-instrumentation were reconstructed and aligned. Morphological changes of the lingual canals were evaluated. No instrument breakages occurred during the procedure of root canal instrumentation. HyFlex CM and XP-endo Shaper performed better than M3 files in preparation of lingual canals (Vertucci type V) of mandibular first premolars in terms of apical transportation and unprepared surface area.

Evaluation of C-shaped canals in maxillary molars in a Chinese population using CBCT

Introduction

The aim of this study was to evaluate the prevalence and characteristics of C-shaped root canals in maxillary first (MFMs) and second (MSMs) molars in a Southwestern Chinese population using cone-beam computed tomographic (CBCT).

Methods

CBCT images of MFMs (n = 1488) and MSMs (n = 1547) from 1508 subjects enrolled in Guiyang Hospital of Stomatology between July 2018 to February 2021 were evaluated for the incidence and types of C-shaped root canals. Differences by age, sex, left or right side, and bilateral symmetry were also evaluated.

Results

C-shaped root canals were present in 2.93% MFMs and MSMs (n = 3035) in the Southwestern Chinese population. A significant higher incidence was observed in the MSMs (5.24%) than in the MFMs (0.54%). Increased incidences were noted in teeth with fused root. Two major types and 5 subtypes of C-shaped canal system of maxillary molars were defined, and the most common type of C-shaped canals is fusion of mesial-buccal (MB) and distal-buccal (DB) canals (Type I subtype C). No significant gender and age differences were noted in the prevalence of C-shaped root canals in this population, and no significant difference was seen in its incidence in the left or right MFMs and MSMs. The bilateral occurrence was observed in 1.27% of the patients.

Conclusion

C-shaped root canals are more frequently present in MSMs than in MFMs in the Southwestern Chinese population, with Type I subtype C (MB-DB canal fusion) as the most common subtype and low incidence of bilateral symmetry.

A micro-CT analysis of radicular dentine thickness in mandibular first premolars presenting C-shaped root canals: Identification of potential danger zones

AIM

To describe the radicular dentine thickness in mandibular first premolars presenting C-shaped root canals, in order to identify the canal walls with less thickness as potential danger zones. In addition, to describe the internal and external anatomical characteristics of these teeth and to associate them to the dentine thickness.

METHODOLOGY

A total of 70 mandibular first premolars presenting C-shaped root canals were examined. Their internal morphology was analyzed using Vertucci´s and Fan´s criteria, and their external morphology was analyzed using the ASUDAS score. Besides, the dentine thickness around the root canals was two/three-dimensionally determined at five root planes and quantified in the distal and the mesial aspects.

RESULTS

According to Fan´s, ASUDAS, and Vertucci´s classifications, the most common canal configurations were category C3, grade 3, and type V, respectively. In Vertucci's type III anatomy, the mesial root wall of the lingual canal showed significantly less dentine thickness than the distal wall in the middle plane (p = 0.031). Similarly, in Vertucci's type V anatomy, significantly less dentine thickness was observed in the mesial root wall of the buccal and lingual canals in the middle plane (p < 0.001) and the buccal canal in the middle-apical plane (p = 0.014) than the distal root wall of these canals. In teeth with ASUDAS grade 3 and 4 scores, significantly less dentine thickness was observed in the mesial in comparison with the distal root wall of these canals. These differences were demonstrated in the middle and middle-apical planes (p < 0.001) of grade 3 teeth and the middle-apical plane (p < 0.001) of grade 4 teeth. In these root planes, the Ver1-AS3 and VerV-AS3 combinations presented a 4-times greater risk of presenting walls with a critical dentine thickness of 0.6 mm (OR=4, p = 0.025) than the combinations Ver1-AS2, VerV-AS2, VerV-AS4, and VerIII-AS3.

CONCLUSIONS

The root canal system configuration of mandibular first premolars with C-shaped canals showed a wide range of anatomical variations. The lowest dentine thickness was located in the mesial wall of the canals in the middle and apical root thirds of Vertucci´s type III and V anatomies and in teeth with deep radicular grooves scored as ASUDAS grade 3 and 4. In the middle and middle-apical planes, the presence of the combinations Ver1-AS3 and VerV-AS3 showed a high risk of presenting a critical dentine thickness of 0.6 mm. Therefore, these root canal walls with less dentine thickness represent potential instrumentation danger zones in mandibular first premolars with C-shaped canals.

Canal configuration and root morphology of mandibular premolars using cone-beam computed tomography in a Korean population

OBJECTIVES

This study aimed to investigate the anatomy of mandibular premolars from two perspectives-the canal configuration and radicular grooves-using cone-beam computed tomography (CBCT) in a large Korean population.

MATERIALS AND METHODS

CBCT images of mandibles acquired from March 2018 to December 2019 for dental treatment were randomly selected. In each image, the root canal of premolars was classified into 8 types according to the canal merging or diverging pattern and the number of apical foramens. The presence and the location of radicular grooves were also assessed. Statistical analysis was performed.

RESULTS

A total of 1463 first and 1448 s premolars from 732 patients (390 males, 342 females, mean age of 36.1 years) were evaluated. A single canal with one foramen predominated in both first (85.7%) and second (99.5%) premolars, while complete or partial multi-canals accounted for 14.3% and 0.5% of first and second premolars, respectively. The prevalence of radicular grooves was significantly higher in first premolars (13.2%) than in second premolars (0.5%) and in males (4.3%, n = 119) than in females (2.5%, n = 73).

CONCLUSIONS

Although most premolars were complete single canals, the first premolars showed a relatively higher number of complex canals compared to the second premolar. In addition, radicular grooves in mandibular premolars were significantly more common in male patients.

CLINICAL RELEVANCE

When planning the endodontic treatment of mandibular premolars, clinicians should be aware of their morphologic complexity, especially in the first premolar of male patients.

Cone-beam computed tomography evaluation of C-shaped root and canal morphology of mandibular premolars

BACKGROUND

Mandibular premolars are complicated teeth to endodontically treat due to the anatomical variations that can present. The purpose of this study was to determine the presence of C-shaped configurations in mandibular premolars by cone-beam computed tomography (CBCT).

METHODS

380 mandibular first premolars and 308 mandibular second premolars cone-beam computed tomographic images were obtained from 292 patients (175 female and 117 male). Tooth position, number of roots, root canals, C-shaped root canal system configuration, level of canal bifurcation and radicular grooves were evaluated by two endodontists trained in CBCT evaluation; previously calibrated between them, and a radiologist with endodontic experience. Data were statistically compared by The Chi-square test (α = 0.05) to examine any significant difference between gender and C-shaped root canal system and any significant difference between C-shaped configuration according to Fan criteria and gender.

RESULTS

Overall 100% (n = 688) teeth examined, 19.2% (n = 132) had a C-shaped root canals system. 9.16% (n = 63) in male patients and 10.03% (n = 69) in female patients. The prevalence of C-shaped root canal system in mandibular first premolar was 83.33 and 16.66% in mandibular second premolars. According to Fan classification, the mandibular first premolars showed 3.63% as C1, 9.09% C2, 59.09% C3, 21.81% C4a, 1.8% C4b. Mandibular second premolars showed 13.63% as C1, 18.18% C2, 13.63% C3, 27.27% C4a, 9.09% C4b. Male patients showed 4.54% as C1, 3.78% C2, 22.72% C3, 11.36% C4a, 0.75% C4b, and 4.54% out of classification. Female patients showed 0.75% as C1, 6.81% C2, 30.03% C3, 9.84 C4a, 2.27% C4b, and 2.27% out of classification. The 53.36% canal bifurcation in mandibular first premolars and 50.09% in mandibular second premolars were in the middle third. No statistical differences were found between C-shaped root canal system and gender or C-shaped configuration according to Fan criteria and gender. P was < 0.05.

CONCLUSIONS

Within the limitation of this study, the presence of C-shaped anatomical system is relatively low in mandibular second premolars than in mandibular first premolars.

Effectiveness of various endodontic systems in treating teeth with C-shaped root canals

Introduction — C-shaped configuration is amongst the most complicated root canal varieties requiring additional effort for successful endodontic treatment. The goal of this study was the laboratory comparison of the endodontic treatment efficiencies via XP-endo vs. Gentlefile systems for the teeth with C-shaped root canals. Material and Methods — In laboratory settings, 36 teeth with established C-shaped configuration, extracted for medical reasons (24 mandibular premolars and 12 mandibular second molars), underwent the root canal treatment by XP-endo (XP) and Gentlefile (GF) systems. Treatment quality was evaluated on the basis of dye penetration tests and examination of root dentinal surface with a scanning electron microscope. The significance of differences between the groups was assessed via Mann-Whitney U test. Results — For GF instruments, the average size of stained area in the apical third of teeth was 3.33±2.73%, while in the coronal third it amounted to 13.49±13.58%. The results of using the XP instruments demonstrated the average size of stained area in the apical third equal to 15.45±12.48%, while in the coronal third it was 37.30±14.06%. The scanning electron microscopy revealed a rougher surface of dentin and the remnants of stained layer in root canals treated with GF system. Conclusion — Thus, XP instruments exhibited a better treatment quality compared with GF system. The obtained data may justify the choice of instruments for endodontic teeth treatment in case of an intricate root canal system.

Evaluation of Palatal Furcation Groove and Root Canal Anatomy of Maxillary First Premolar: A CBCT and Micro-CT Study

Objectives

This study is aimed at investigating the root and root canal morphology by cone beam computed tomography (CBCT) and palatal furcation groove of the buccal root by microcomputed tomography (micro-CT) of maxillary first premolars in a Chinese subpopulation.

Methods

This study assessed CBCT images of 440 patients aged 14-80 years. Based on Vertucci's classification, the number of roots and the canal configuration were determined. Forty-eight maxillary first premolars with furcation grooves were analyzed by micro-CT in patients aged 18-25 years.

Results

Based on the CBCT assay, 70.22% and 29.32% of maxillary first premolars were 1 root and 2 roots, respectively. The configuration indicated statistical difference (P < 0.05) between male and female patients. The most common canal type was type IV and was found in 44.32% of cases, followed by type I in 27.84%, and then type II in 20.57%. Root bifurcations had 40.13% prevalence which was distributed more in the middle third than in the cervical and the apical third. For the micro-CT study, 95.83% of the furcation groove configuration was found in the bifurcated maxillary first premolars. The length varied from 1.02 to 7.63 mm. The mean depth of this groove was 0.57 mm in the root coronal, 0.47 mm in the root middle, and 0.22 mm in the root apical level. Palatal dentin width was smaller than 1 mm.

Conclusion

The anatomy of the root and root canal system and the irregular wall width of maxillary first premolars with furcation grooves may help dentists to understand the anatomical morphology and improve the outcomes of endodontic treatment.

Preparation of the lingual canal in mandibular first premolar with canal bifurcation

The aim of this study was to establish an effective method of locating and negotiating the lingual canal in mandibular first premolars with two canals during root canal preparation. A total of 125 mandibular first premolars with radicular grooves were collected, and after micro-computed tomography scanning, 50 mandibular first premolars with a Vertucci V/III canal form were selected based on the inclusion criteria. Access cavities were prepared, and the lingual canals (LCs) were searched in four following steps: step 1 direct vision and a straight K-file; step 2 stereomicroscopy and a straight K-file; step 3 stereomicroscopy and a pre-curved K-file; and step 4 a long-neck bur. After localization, the LCs were instrumented. In most cases, access to the LC was achieved by step 2 (19/50, 38%) or step 3 (22/50, 44%). In three cases (6%), step 1 alone was enough to achieve access to the orifice, and in six cases (12%), access to the lingual canal was not achieved until step 4. Overall, 43 of the 50 mandibular first premolars (86%) were successfully instrumented, and the remaining seven failed. Two cases failed in the process of negotiating the canal to full length and five cases failed due to procedural errors (ledge formation, canal perforation, vertical fracture, or instrument separation). The LC in mandibular first premolars is a major endodontic challenge. A stereomicroscope and a pre-curved K file are suggested to be valuable tools for detecting and accessing the extra LC.

Root and Canal Morphology of Mandibular Premolar Teeth in a Kuwaiti Subpopulation: A CBCT Clinical Study

OBJECTIVE

To study the root and root canal morphology of mandibular premolars in a Kuwaiti subpopulation using cone-beam computed tomography (CBCT).

METHODS

152 CBCT images were obtained from the radiology department archives of four dental centers in Kuwait. A total of 476 mandibular premolar teeth were analyzed by two observers. The number of roots, root canal configuration types and canal curvature measurements were examined. The relationship between sex, tooth position, and incidence of an additional canal were compared using the chi-square test, and the level of significance was set at 0.05 (P=0.05).

RESULTS

The number of roots in mandibular first premolars was one in 73.9%, two in 24.9%, three and four in 1.2%. On the other hand, the number of roots in mandibular second premolars was one in 79.2% and two in 20.8%. Based on Vertucci's classification system, 18.7% of the teeth were type II followed by type VI (14.3%). The majority of the examined teeth were straight (74.8%) and the incidence of distal root angulation was about 21%. Canal configurations not included in the Vertucci classification were reported in 102 teeth (21.4%). Variability was significantly higher in the second premolars compared to first premolar (P<0.05).

CONCLUSION

The Kuwaiti population has complex root canal morphology in mandibular premolar teeth.

Frequency of non-single canals in mandibular premolars and correlations with other anatomical variants: an in vivo cone beam computed tomography study

Background

A knowledge regarding anatomical variants is important to achieve success in endodontic treatment. Root canal treatment of mandibular first premolars (PM1 s) is challenging due to the existence of numerous variations in canal configurations, including a C-shaped variant. We aim to determine the frequency and morphologic characteristics of non-single canals of mandibular first (PM1 s) and second (PM2 s) premolars in a Korean population using cone beam computed tomography (CBCT) and to evaluate correlations between non-single canals of PM1 s and other anatomical variants, such as distolingual roots (DLRs) in mandibular first molars (M1 s) and C-shaped canals in mandibular second molars (M2 s).

Methods

A total of 971 PM1 s and 997 PM2 s from 500 patients were examined in vivo by CBCT. Root canal configurations and C-shaped canals were determined in accordance with the Vertucci classification and Fan classification, respectively. The correlation between non-single canals in PM1 s and DLRs in M1 s was evaluated using logistic regression analysis.

Results

PM2 s typically had one root (99.89%) with one canal (98.4%). Among PM1 s with non-single canals (21.2%), Vertucci type V (10.9%) and C-shaped (3.7%) canals were prevalent. Among C-shaped PM1 canals, the majority were Vertucci type V (77.8%); a C-shaped configuration (C2) was predominant mostly at the middle and/or apical third of the root. After adjusting for other variables (i.e., sex, age, and side), C-shaped canals in PM1 s was significantly correlated with the presence of DLRs in M1 s (odds ratio = 2.616; 95% confidence interval, 1.257–5.443; p = 0.010).

Conclusions

The presence of C-shaped PM1 canals was positively related to the presence of DLRs in M1 s. Although C-shaped canals in PM1 s are difficult to distinguish, this finding could aid clinicians in predicting C-shaped canal configurations in PM1 s of patients who exhibit DLRs in M1 s.

Investigation using cone beam computed tomography analysis, of radicular grooves and canal configurations of mandibular premolars in a Turkish subpopulation

OBJECTIVE

To conduct an in vivo evaluation of prevalence of root canal configurations, lengths of C-shaped canals, prevalence and depths of radicular grooves (RGs), in mandibular first and second premolars in a Turkish subpopulation using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

CBCT images of 327 first and 264 second premolars were included. Canal configurations, locations, lengths, and types of C-shaped canals, and RGs were evaluated on CBCT images. Data were statistically analyzed (P < 0.05).

RESULTS

First and second premolars were classified as follows: type I, (83.8%, 97.72%); type V, (12.22%, 0.76%); type III, (3.06%, 0.76%); and other types. RGs were exhibited by 14.68% of first and 2.27% of second premolars (P < 0.05). Incidence of complex canals (types III, V and other types, 89.8%) in first premolars with RGs was significantly higher versuswithout RGs (P < 0.05). C-shaped configuration was exhibited by 4.58% of first (80% semilunar-type), and 1.13% of second premolars (P < 0.05). All first premolars with C-shaped canals showed RGs and complex canals.

CONCLUSIONS

Complex canals and RGs frequently co-exist in mandibular premolars. C-shaped canals are not common in mandibular premolars, and mostly located in middle thirds. Type V is the most prevalent complex canal configuration in first premolars, and frequently associated with a C-shaped semilunar-type anatomy.

Root and root canal variations of the human maxillary and mandibular third molars in a Chinese population: A micro-computed tomographic study

OBJECTIVES

To investigate the anatomical variations of the root and root canal configuration of the human third molars.

DESIGNS

A total of 130 maxillary and 130 mandibular third molars were collected from a native Chinese population. All teeth were scanned by micro-computed tomography. After 3D reconstruction, the root and canal morphology of each tooth was examined both qualitatively and quantitatively.

RESULTS

For maxillary molars, a single fused root (67 cases, 51.5%) and a single root canal system (64 cases, 49.2%) was most common root/canal form; the typical three-rooted molars were detected only in 33 cases (25.4%), and the secondary MB canals were detected only in 9 molars (6.9%). For mandibular molars, 62 teeth were single-rooted (47.7%) and 42 had a single root canal system (32.3%); 20 singled-rooted and 60 double-rooted molars exhibited independent mesial and distal root canal systems (61.5%), and the type 1-1 canal was the most common configuration for mesial (57 cases) and distal (81 cases) root canal systems. C-shaped canals were detected in 11 maxillary and 36 mandibular single-rooted molars. The mean root surface area, root and crown volume of mandibular third molars were significantly higher than the maxillary third molars (P <  0.01).

CONCLUSION

The root canal system of the third molars may exhibit several anatomic variations. Whereas in most of cases, the degree of the canal differentiation was at a low level, and the canal form was not complicate.

Micro-CT Evaluation of Root and Canal Morphology of Mandibular First Premolars with Radicular Grooves

Abstract The aim of this study was to evaluate morphological features of 70 single-rooted mandibular first premolars with radicular grooves (RG) using micro-CT technology. Teeth were scanned and evaluated regarding the morphology of the roots and root canals as well as length, depth and percentage frequency location of the RG. Volume, surface area and Structure Model Index (SMI) of the canals were measured for the full root length. Two-dimensional parameters and frequency of canal orifices were evaluated at 1, 2, and 3 mm levels from the apical foramen. The number of accessory canals, the dentinal thickness, and cross-sectional appearance of the canal at different root levels were also recorded. Expression of deep grooves was observed in 21.42% of the sample. Mean lengths of root and RG were 13.43 mm and 8.5 mm, respectively, while depth of the RG ranged from 0.75 to 1.13 mm. Mean canal volume, surface area and SMI were 10.78 mm3, 58.51 mm2, and 2.84, respectively. Apical delta was present in 4.35% of the sample and accessory canals were observed mostly at the middle and apical thirds. Two-dimensional parameters indicated an oval-shaped cross-sectional appearance of the root canal with a high percentage frequency of canal divisions (87.15%). Canal configuration type V (58.57%) was the most prevalent. C-shaped configuration was observed in 13 premolars (18.57%), whereas dentinal thickness ranged from 1.0 to 1.31 mm. Radicular grooves in mandibular first premolars was associated with the occurrence of several anatomical complexities, including C-shaped canals and divisions of the main root canal.

Measurement of root surface area of permanent teeth with root variations in a Chinese population-A micro-CT analysis

OBJECTIVES

This study investigated the influence of root variations on the root surface area (RSA) by using micro-CT scans.

DESIGN

A total of 228 extracted permanent teeth (2-rooted and single-rooted maxillary first premolars, mandibular first premolars with non-Tomes' and Tomes' roots, 2-rooted and 3-rooted mandibular first molars, and 2-rooted and C-shaped mandibular second molars) were collected in a Chinese population and scanned using a micro-CT. In Mimics 15.01, 3D tooth models were generated, and the net and percent remaining RSA at various simulated attachment levels were measured. The data corresponding to attachment level were fitted to a linear function.

RESULTS

The mean total RSA for different root forms decreased in the following order: 3-rooted>2-rooted>C-shaped>single-rooted. However, the differences were statistically significant (p<0.01) only for 2-rooted vs. single-rooted maxillary first premolars, and 2-rooted vs. C-shaped mandibular second molars. Linear functions can perfectly fit in relating the attachment level to the net and percent remaining RSA.

CONCLUSION

Micro-CT combined with Mimics software offers simple and precise technique for quantitative analysis of the RSA. Root variations may affect the total amount and vertical distribution of the net RSA. However, the degree of influence varies with the tooth type.

Aetiology, incidence and morphology of the C-shaped root canal system and its impact on clinical endodontics

The C-shaped root canal constitutes an unusual root morphology that can be found primarily in mandibular second permanent molars. Due to the complexity of their structure, C-shaped root canal systems may complicate endodontic interventions. A thorough understanding of root canal morphology is therefore imperative for proper diagnosis and successful treatment. This review aims to summarize current knowledge regarding C-shaped roots and root canals, from basic morphology to advanced endodontic procedures. To this end, a systematic search was conducted using the MEDLINE, BIOSIS, Cochrane Library, EMBASE, Google Scholar, Web of Science, PLoS and BioMed Central databases, and many rarely cited articles were included. Furthermore, four interactive 3D models of extracted teeth are introduced that will allow for a better understanding of the complex C-shaped root canal morphology. In addition, the present publication includes an embedded best-practice video showing an exemplary root canal procedure on a tooth with a pronounced C-shaped root canal. The survey of this unusual structure concludes with a number of suggestions concerning future research efforts.