Analytical techniques for characterization of cyclodextrin complexes in aqueous solution: A review

Inclusion complexes of novel formyl chromone Schiff bases with β-Cyclodextrin: Synthesis, characterization, DNA binding studies and in-vitro release study

The present study involved the synthesis of five novel Schiff bases (SB1-SB5) of formyl chromone and their inclusion complexes with β-cyclodextrin through kneading approach to enhance the solubility and stability of SBs. Characterization was conducted using FTIR, NMR, SEM, TEM, p-XRD, and Mass Spectrometry. UV fluorescence and pH stability studies confirmed the formation of the inclusion complex. Structural validation of complexes was conducted via molecular docking (PDB ID: 1BFN) and 50 ns MD simulation study. DFT studies were performed on SBs using B3LYP/6-31 + G(d,p) basis set. All SBs exhibited favorable ADME properties and high binding interactions were observed in molecular docking with ctDNA (PDB Id: 1BNA). Further, in-vitro UV absorption and fluorescence experiments demonstrated strong ctDNA interactions for all Schiff bases, with binding constants in the order of 105 M-1, indicating groove binding mode. Among the SBs, SB4 exhibited the highest affinity for DNA grooves, with a binding constant (Kb) of 1.7 × 106 M-1. However, the SB4/β-Cyd inclusion complex also interacted with DNA but with low binding constants compared to SB4. An in-vitro release study of SB4/β-Cyd, revealed 78.92 % dissolution of the inclusion complex, highlighting its potential for enhanced solubility and stability in biological systems.

Randomly methylated β-cyclodextrin improves water - solubility, cellular protection and mucosa permeability of idebenone

Neurodegenerative diseases such as Alzheimer's are very common today. Idebenone (IDE) is a potent antioxidant with good potential for restoring cerebral efficiency in cases of these and other medical conditions, but a serious drawback for the clinical use of IDE in neurological disorders lies in its scarce water solubility, which greatly inhibits its bioavailability. In this work, we prepared the inclusion complex of IDE with randomly methylated β-cyclodextrin (RAMEB), resulting in improved water solubility of the included drug; then its in vitro biological activity and ex vivo permeability was evalutated. The solid complex was characterized through FT-IR spectroscopy, Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). A 78-fold improvement of the solubility of IDE in water resulted, together with a strong 1:1 host-guest interaction (association constant of 12630 M-1), and dissolution of the complex within 15 min, all evidenced during the in-solution studies. Biological in vitro studies were then performed on differentiated human neuroblastoma cells (SH-SY5Y) subjected to oxidative stress. Pretreatment with IDE/RAMEB positively affected cell viability, promoted the nuclear translocation of Nrf2, and increased the levels of GSH as well as those of the endogenous antioxidant enzymes Mn-SOD and HO-1. Lastly, the complexation significantly improved the permeation of IDE through isolated rat nasal mucosa.

A Green Host-Guest Protocol to Improve Water Solubility of Fluorescent Dyes

Improving fluorescence emission efficiency is essential to develop novel luminescent materials. However, the low water solubility of conventional fluorescent dyes is a serious obstacle to broadening the application scope. Herein, a green protocol have been proposed: Two poorly water-soluble naphthalimide derivatives MONI and MANI with high fluorescent quantum yields (larger than 0.95 in toluene solution) were loaded in three different sizes of cyclodextrin (CD; α, β, γ-CD) with high water solubility. To further check the feasibility of the proposal, density functional theory (DFT) and time dependent-DFT (TD-DFT) methods combining the Own N-layer Integrated molecular Orbital molecular Mechanics (ONIOM) model with dispersion correction were employed to investigate the geometric and electronic structures of complexes CD·MXNI (X = N, O) in the excited-state process. TD-DFT calculations predict that the fantastic emission behavior of MXNI can be reserved after binding with CD, even improving fluorescent intensity in aqueous solution. Basis set superposition error (BSSE) correction and symmetry adapted perturbation theory (SAPT) were adopted to estimate the complexation energies and weak noncovalent interactions. The middle-sized β-CD is the perfect candidate to allow fluorescent molecules to settle into its cavity, forming an inclusion complex. Energy decomposition analysis (EDA) indicates that dispersion is superior to electrostatics interaction in embedding-type β-CD·MXNI, while it is contrary in α,γ-CD·MXNI. NMR calculations further prove the existence of a strong intermolecular hydrogen bond interaction between host and guest. Weak interactions that limited molecular vibration and hampered the nonradiative inactivation channel are conducive to the enhanced emission intensity.

Microencapsulation of the Biocide Benzisothiazolinone (BIT) by Inclusion in Methyl-β-cyclodextrin and Screening of Its Antibacterial and Ecotoxicity Properties

The excessive use of biocides has considerable environmental and economic impacts; this is why new technologies have been sought to decrease the concentration levels applied in an effort to reduce the use of these substances. Microencapsulation using cyclodextrins has been widely used in the food and pharmaceutical industries as a way of reducing the concentrations of the active substance necessary to achieve a biological effect and/or eliminate its irritating or toxicological effects. In this study, the inclusion complexation behavior and binding ability of benzothiazolinone (BIT) with different β-cyclodextrins (β-CD, HP-β-CD, and Me-β-CD) was investigated. The intermolecular interactions were examined through UV and FTIR spectroscopy, DSC, 1D 1H NMR, and 2D ROESY. The highest stability constant was observed for the BIT/Me-β-CD inclusion complex (299.5 ± 2.9 M-1). Antibacterial activity was investigated against Staphylococcus aureus and Escherichia coli, and the results revealed that the BIT/Me-β-CD inclusion complex displays a higher antibacterial activity than BIT. The acute toxicity of the biocide and inclusion complex was also examined using the photobacterium Aliivibrio fischeri. Although BIT exhibited higher toxicity than the inclusion complex, further investigation is needed due to the quorum quenching effect of β-CDs. The data found suggest that BIT microencapsulation can increase its aqueous solubility and can be used as an effective tool to improve its chemical, biological, and ecotoxicological properties.

The Binding Mechanism Between Cyclodextrins and Anticancer Drug Noscapine: A Spectroscopic and Molecular Docking Study

In this paper the binding of noscapine (NOS) as an anticancer drug with poor bioavailability and low solubility with beta and methyl-beta cyclodextrins (β-CD and M-β-CD) as the biocompatible drug carriers were discussed using ultraviolet-visible, fluorescence and nuclear magnetic resonance spectroscopy, as well as molecular docking. The absorption of NOS changed when it was bound to both cyclodextrins, resulting in a hyperchromic shift. It formed a 1:1 stoichiometry inclusion complex with both cyclodextrins according to the Benesi-Hildebrand equation. The binding affinity was larger in NOS-M-β-CD (5.9 (± 0.66) × 103 M- 1) than NOS-β-CD (3.7 (± 0.22) × 103 M- 1) complex. The fluorescence emission band of NOS at 408 nm was quenched when NOS was complexed with β-CD, and enhanced in the presence of M-β-CD, while the shoulder at 350 nm was enhanced selectively when NOS was complexed with M-β-CD. The fluorescence quenching of NOS with β-CD showed a negative deviation from the Stern-Volmer. The thermodynamic parameters have been estimated with the help of the Van't Hoff equation in different temperatures, and a dynamic mechanism was proposed for quenching. Also, both ΔH and ΔS have positive values thus the main interactions result in hydrophobic forces. Moreover, the negative value of ΔG indicates that the bonding process is spontaneous. 1H NMR chemical shift changes were observable for NOS and both CDs protons due to the chemical environment changes of some nuclei upon complexation. The molecular docking results revealed that the 1:1 inclusion complex possesses a good molecular shape complementarity score for their most probable structures, and indicated that the M-β-CD inclusion system gave the higher complexation efficiency. The binding energy values for β-CD and M-β-CD were determined to be -6.7 and - 9.5 kcal/mol, respectively. These findings suggest the same as the result of experimental tests that the NOS-M-β-CD complex is more stable than the NOS-β-CD complex.

Ion Mobility-Mass Spectrometry Strategies to Elucidate the Anhydrous Structure of Noncovalent Guest/Host Complexes

Structural mass spectrometry (MS) techniques are fast and sensitive analytical methods to identify noncovalent guest/host complexation phenomena for desirable solution-phase properties. Current MS-based studies on guest/host complexes of drug and drug-like molecules are sparse, and there is limited guidance on how to interpret MS information in the context of host nanoencapsulation and inclusion. Here, we use structural MS strategies, combining energy-resolved MS (ERMS), ion mobility-MS (IM-MS), and computational modeling, to characterize 14 chemically distinct drug and drug-like compounds for their propensity to form guest/host complexes with the widely used excipient, beta-cyclodextrin (βCD). The majority (11/14) yielded a 1:1 guest/host complex, and ion mobility collision cross section (CCS) analysis provided subtle evidence of gas-phase compaction of complexes in both polarities. The three distinct dissociation channels observed in ERMS (i.e., charged βCD, charged guest, and partial guest loss) were used to direct charge-site assignments for computational modeling, and structural candidates were prioritized using helium-derived CCS measurements combined with root-mean-square distance analysis. The combined analytical information from ERMS, IM-MS, and computational modeling suggested that the majority of anhydrous complexes are inclusion complexes with βCD. Taken together, this work demonstrates a roadmap for how multiple MS-based analytical measurements can be combined to interpret the structures that guest/host complexes adopt in the absence of water.

Inclusion complexes of β-cyclodextrin with isomeric ester aroma compounds: Preparation, characterization, mechanism study, and controlled release

Cyclodextrins (CDs) have been discovered to provide an efficient solution to the limited application of ester aroma molecules used in food, tobacco, and medication due to their strong smell and unstable storage. This work combined molecular modeling and experimental to analyze the conformation and controlled release of isomeric ester aroma compounds/β-CD inclusion complexes (ICs). The investigation revealed that ester aroma compounds could be effectively encapsulated within the β-CD cavity, forming ICs with low binding affinity. Furthermore, the key driving forces in ICs were identified as hydrogen bonds and van der Waals interactions through theoretical simulation. Results from the Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) and Isothermal titration calorimetry (ITC) experiments confirmed the intermolecular interaction predicted by the molecular model. Notably, the release rate of aroma compounds from L-menthyl acetate/β-CD (LMA/β-CD) IC exceeded that of terpinyl acetate/β-CD (TA/β-CD) IC. This difference is attributed to the length of the chain of aroma molecules and the variation in the position of functional groups, influencing the stable formation of ICs with β-CD. These findings hold potential implications for refining the application of ICs across diverse industries.

Calixarenes and cyclodextrins as off- and on-fluorescence probes for carbazole

Absorption and fluorescence spectra of the nitrogen polycyclic aromatic hydrocarbon carbazole (CZL) were analyzed with native cyclodextrins (CD;α,β,γ); derivatizedCD(hydroxypropyl-β-cyclodextrin,HPCD; methyl-β-cyclodextrin,MeCD) and p-sulfonated calixarenes (SCAn, with n = 6 and 8) macrocycles. The results showed a slight increase in the absorbance ofCZLwithCD, but the mixture ofCZLwithSCAshowed lower absorption than the sum of the individual spectra. Also, changes in fluorescence were observed by adding the macrocycles, quenching withSCA, and significant increases withCD. The higher fluorescence enhancement was withHPCDrationalized as a complex formation with 1:1 stoichiometry, with an average value for the association constant (KA) of (12 ± 1) x 102M-1, and a quantum yield ratio between the complexedCZLand freeCZL(ΦCZL-HPCD/ΦCZL) of (1.56 ± 0.02) at neutral pH and 25.0 °C. These increases in fluorescence were used as an on-fluorescence switch to develop a supramolecular analytical method forCZLin aqueous samples. The best analytical parameters were inHPCD(LOD = 1.41 ± 0.01 ng mL-1). The method was validated in aqueous samples of river and tap water with recoveries between 96%-104%. The proposed supramolecular method is quick, direct, selective and represents an alternative and low-cost analysis method.

A novel cationic β-cyclodextrin decorated with a choline-like pendant exhibits Iodophor, Mucoadhesive and bactericidal properties

Iodine is a vital microelement and a powerful antiseptic with a rapid and broad spectrum of action. The development of iodophor compounds to improve the solubility and stability of iodine is still challenging. Here, we report the synthesis of a novel cationic β-cyclodextrin bearing a choline-like pendant (β-CD-Chol) designed to complex and deliver iodine to bacterial cells. The characterization of β-CD-Chol and the investigation of the inclusion complex with iodine were performed by NMR spectroscopy, mass spectrometry, UV-vis spectrophotometry, isothermal titration calorimetry, and dynamic light scattering. The functionalization with the positively charged unit conferred improved water-solubility, mucoadhesivity, and iodine complexation efficiency to the β-CD scaffold. The water-soluble β-CD-Chol/iodine complex efficiently formed both in solution and by solid-vapor reaction. The solid complex exhibited a significant stability for months. Iodine release from the inclusion complex was satisfactory and the bactericidal activity was proved against a Staphylococcus epidermidis strain. The absence of cytotoxicity tested on human keratinocytes and the improved mucoadhesivity make β-CD-Chol a promising drug delivery system and an appealing iodophor candidate for iodine-based antisepsis including mucosa disinfection.

Spatial arrangements of cyclodextrin host-guest complexes in solution studied by 13C NMR and molecular modelling

13C NMR spectroscopic analyses of Cs symmetric guest molecules in the cyclodextrin host cavity, combined with molecular modelling and solid-state X-ray analysis, provides a detailed description of the spatial arrangement of cyclodextrin host-guest complexes in solution. The chiral cavity of the cyclodextrin molecule creates an anisotropic environment for the guest molecule resulting in a splitting of its prochiral carbon signals in 13C NMR spectra. This signal split can be correlated to the distance of the guest atoms from the wall of the host cavity and to the spatial separation of binding sites preferred by pairs of prochiral carbon atoms. These measurements complement traditional solid-state analyses, which rely on the crystallization of host-guest complexes and their crystallographic analysis.

Addressing the complexities in measuring cyclodextrin-sterol binding constants: A multidimensional study

A class of cyclodextrin (CD) dimers has emerged as a potential new treatment for atherosclerosis; they work by forming strong, soluble inclusion complexes with oxysterols, allowing the body to reduce and heal arterial plaques. However, characterizing the interactions between CD dimers and oxysterols presents formidable challenges due to low sterol solubility, the synthesis of modified CDs resulting in varying number and position of molecular substitutions, and the diversity of interaction mechanisms. To address these challenges and illuminate the nuances of CD-sterol interactions, we have used multiple orthogonal approaches for a comprehensive characterization. Results obtained from three independent techniques - metadynamics simulations, competitive isothermal titration calorimetry, and circular dichroism - to quantify CD-sterol binding are presented. The objective of this study is to obtain the binding constants and gain insights into the intricate nature of the system, while accounting for the advantages and limitations of each method. Notably, our findings demonstrate ∼1000× stronger affinity of the CD dimer for 7-ketocholesterol in comparison to cholesterol for the 1:1 complex in direct binding assays. These methodologies and findings not only enhance our understanding of CD dimer-sterol interactions, but could also be generally applicable to prediction and quantification of other challenging host-guest complex systems.

Ferulic acid grafted into β-cyclodextrin nanosponges ameliorates Paraquat-induced human MRC-5 fibroblast injury

Paraquat (PQ) is a commercially important and effective herbicide in the world. Nevertheless, it has higher toxicity causing acute organ damage and different complications, mainly in the lungs and kidneys. Ferulic acid (FA), 4-hydroxy-3-methoxycinnamic acid imposes multiple pharmacological impacts. No protective effect of FA on PQ poisoning-caused human embryonic lung fibroblast damage has not been reported. Despite their many beneficial effects, FA is characterized by poor water solubility, low bioavailability, and phytochemical instability. To solve the problem, β-cyclodextrin nanosponge (β-CD NSs) was utilized to increase the solubility of FA so that it was grafted into β-CD NSs to establish β-CD@FA NSs. The purpose of this work was to examine for the first time the protective effect of β-CD@FA NS on MRC-5 human lung cells damages induced by PQ poisoning. MTS assay was performed to investigate the viability of MRC-5 cells at different concentrations of FA/β-CD@FA NSs when cells were co-cultured with 0.2 μg/mL PQ. The flow cytometry study was carried out to determine apoptosis. Malondialdehyde (MDA), superoxide dismutase (SOD), and catalase (CAT) levels were detected using appropriate biochemistry kits. Compared with the PQ group, the cell activity, CAT, and SOD levels were significantly increased in the FA and chiefly in β-CD@FA NSs intervention groups, whereas apoptosis and MDA levels were markedly decreased. The inflammatory factors tumor necrosis factor-alpha (TNF-α), interleukin 6 (IL-6), and interleukin 22 (IL-22) were detected. The results demonstrate that β-CD@FA NSs can inhibit PQ-induced cell damage by enhancing antioxidant stress capacity and regulation of inflammatory responses.

Effects of Encapsulation of Caesalpinia sappan L. with Cyclodextrins for Bovine Mastitis

The main components of Caesalpinia sappan L. (CS) are brazilin and brazilein, which show high potential in pharmacologic applications. However, these have been drastically limited by the poor water solubility and stability. The present study investigates the formation of inclusion complexes F1, F2, and F3 between CS and β-cyclodextrin (βCD), hydroxypropyl-β-cyclodextrin (HPβCD), and methyl-β-cyclodextrin (MβCD), respectively. These complexes were characterized by Fourier transform infrared spectroscopy (FT-IR). The results showed that the highest encapsulation efficiency and loading capacity of CS extract were 44.24% and 9.67%, respectively. The solubility and stability of CS extract were significantly increased through complexation in phase solubility and stability studies. The complexes F1-F3 showed mainly significant antibacterial activities on gram-positive bacteria pathogens causing mastitis. Moreover, the expression levels of COX-2 and iNOS were significantly decreased in LPS-induced inflammatory cells at concentrations of 50 and 100 µg/mL. In addition, treatment of complex F3 (CS/MβCD) in bovine endothelial cells remarkably increased the chemokine gene expression of CXCL3 and CXCL8, which were responsible for immune cell recruitment (9.92 to 11.17 and 8.23 to 9.51-fold relative to that of the LPS-treated group, respectively). This study provides a complete characterization of inclusion complexes between CS extract and βCD, HPβCD, and MβCD for the first time, highlighting the impact of complex formation on the pharmacologic activities of bovine mastitis.

Active and Intelligent Packaging: A Review of the Possible Application of Cyclodextrins in Food Storage and Safety Indicators

Natural cyclodextrins (CDs) can be formed by 6, 7, or 8 glucose molecules (α-, β-, and γ-, respectively) linked in a ring, creating a cone shape. Its interior has an affinity for hydrophobic molecules, while the exterior is hydrophilic and can interact with water molecules. This feature has been used to develop active packaging applied to food, interacting with the product or its environment to improve one or more aspects of its quality or safety. It also provides monitoring information when food is optimal for consumption, as intelligent packaging is essential for the consumer and the merchant. Therefore, this review will focus on discerning which packaging is most appropriate for each situation, solubility and toxicological considerations, characterization techniques, effect on the guest properties, and other aspects related to forming the inclusion complex with bioactive molecules applied to packaging.

NMR exchange dynamics studies of metal-capped cyclodextrins reveal multiple populations of host-guest complexes in solution

Metal-capped molecular hosts are unique in supramolecular chemistry, benefitting from the inner cavity's hydrophobic nature and the metal center's electrochemical properties. It is shown here that the paramagnetic properties of the metals in lanthanide-capped cyclodextrins (Ln-α-CDs and Ln-β-CDs) are a convenient NMR indicator for different populations of host-guest complexes in a given solution. The paramagnetic guest exchange saturation transfer (paraGEST) method was used to study the exchange dynamics in systems composed of Ln-α-CDs or Ln-β-CDs with fluorinated guests, revealing multiple co-existing populations of host-guest complexes exclusively in solutions containing Ln-β-CDs. The enhanced spectral resolution of paraGEST, achieved by a strong pseudo contact shift induction, revealed that different molecular guests can adopt multiple orientations within Ln-β-CDs' cavities and, in contrast, only a single orientation inside Ln-α-CDs. Thus, paraGEST, which can significantly improve NMR detectability and spectral resolution of host-guest systems that experience fast exchange dynamics, is a convenient tool for studying supramolecular systems of metal-capped molecular hosts.

A promising synthetic citric crosslinked β-cyclodextrin derivative for antifungal drugs: Solubilization, cytotoxicity, and antifungal activity

Effective antifungal therapy for the treatment of fungal keratitis requires a high drug concentration at the corneal surface. However, the use of natural β-cyclodextrin (βCD) in the preparation of aqueous eye drop formulations for treating fungal keratitis is limited by its low aqueous solubility. Here, we synthesized water-soluble anionic βCD derivatives capable of forming water-soluble complexes and evaluated the solubility, cytotoxicity, and antifungal efficacy of drug prepared using the βCD derivative. To achieve this, a citric acid crosslinked βCD (polyCTR-βCD) was successfully synthesized, and the aqueous solubilities of selected antifungal drugs, including voriconazole, miconazole (MCZ), itraconazole, and amphotericin B, in polyCTR-βCD and analogous βCD solutions were evaluated. Among the drugs tested, complexation of MCZ with polyCTR-βCD (MCZ/polyCTR-βCD) increased MCZ aqueous solubility by 95-fold compared with that of MCZ/βCD. The inclusion complex formation of MCZ/βCD and MCZ/polyCTR-βCD was confirmed by spectroscopic techniques. Additionally, the nanoaggregates of saturated MCZ/polyCTR-βCD and MCZ/βCD solutions were observed using dynamic light scattering and transmission electron microscopy. Moreover, MCZ/polyCTR-βCD solution exhibited good mucoadhesion, sustained drug release, and high drug permeation of porcine cornea ex vivo. Hen's Egg test-chorioallantoic membrane assay and cell viability study using Statens Seruminstitut Rabbit Cornea cell line showed that both MCZ/polyCTR-βCD and MCZ/βCD exhibited no sign of irritation and non-toxic to cell line. Additionally, antifungal activity evaluation demonstrated that all isolated fungi, including Candida albicans, Aspergillus flavus, and Fusarium solani, were susceptible to MCZ/polyCTR-βCD. Overall, the results showed that polyCTR-βCD could be a promising nanocarrier for the ocular delivery of MCZ.

Cyclodextrin Inclusion Complexes for Improved Drug Bioavailability and Activity: Synthetic and Analytical Aspects

Many active pharmaceutical ingredients show low oral bioavailability due to factors such as poor solubility and physical and chemical instability. The formation of inclusion complexes with cyclodextrins, as well as cyclodextrin-based polymers, nanosponges, and nanofibers, is a valuable tool to improve the oral bioavailability of many drugs. The microencapsulation process modifies key properties of the included drugs including volatility, dissolution rate, bioavailability, and bioactivity. In this context, we present relevant examples of the stabilization of labile drugs through the encapsulation in cyclodextrins. The formation of inclusion complexes with drugs belonging to class IV in the biopharmaceutical classification system as an effective solution to increase their bioavailability is also discussed. The stabilization and improvement in nutraceuticals used as food supplements, which often have low intestinal absorption due to their poor solubility, is also considered. Cyclodextrin-based nanofibers, which are polymer-free and can be generated using environmentally friendly technologies, lead to dramatic bioavailability enhancements. The synthesis of chemically modified cyclodextrins, polymers, and nanosponges based on cyclodextrins is discussed. Analytical techniques that allow the characterization and verification of the formation of true inclusion complexes are also considered, taking into account the differences in the procedures for the formation of inclusion complexes in solution and in the solid state.

Fabrication and Applications of Potentiometric Membrane Sensors Based on Specific Recognition Sites for the Measurement of the Quinolone Antibacterial Drug Gemifloxacin

Supramolecular gemifloxacin (GF) sensors have been developed. Supramolecular chemistry is primarily concerned with noncovalent intermolecular and intramolecular interactions, which are far weaker than covalent connections, but they can be exploited to develop sensors with remarkable affinity for a target analyte. In order to determine the dose form of the quinolone antibacterial drug gemifloxacin, the current study's goal is to adapt three polyvinylchloride (PVC) membrane sensors into an electrochemical technique. Three new potentiometric membrane sensors with cylindric form and responsive to gemifloxacin (GF) were developed. The sensors' setup is based on the usage of o-nitrophenyl octyl ether (o-NPOE) as a plasticizer in a PVC matrix, β-cyclodextrin (β-CD) (sensor 1), γ-cyclodextrin (γ-CD) (sensor 2), and 4-tert-butylcalix[8]arene (calixarene) (sensor 3) as an ionophore, potassium tetrakis (4-chlorophenyl) borate (KTpClPB) as an ion additive for determination of GF. The developed method was verified according to IUPAC guidelines. The sensors under examination have good selectivity for GF, according to their selectivity coefficients. The constructed sensors demonstrated a significant response towards to GF over a concentration range of 2.4 × 10^-6, 2.7 × 10^-6, and 2.42 × 10^-6 mol L^-1 for sensors 1, 2, and 3, respectively. The sensors showed near-Nernstian cationic response for GF at 55 mV, 56 mV, and 60 mV per decade for sensors 1, 2, and 3, respectively. Good recovery and relative standard deviations during the day and between days are displayed by the sensors. They demonstrated good stability, quick response times, long lives, rapid recovery, and precision while also exhibiting good selectivity for GF in various matrices. To determine GF in bulk and dose form, the developed sensors have been successfully deployed. The sensors were also employed as end-point indicators for titrating GF with sodium tetraphenyl borate.

Inclusion Complexes of β-Cyclodextrin with Salvia officinalis Bioactive Compounds and Their Antibacterial Activities

In the present study, the formation of molecular inclusion complexes of Salvia officinalis (sage) bioactive compounds with β-cyclodextrin (β-CD) was evaluated. Sage essential oil (SEO)/β-CD inclusion complexes (ICs) were prepared by co-precipitation at iso-molecular concentrations, and Fourier transform infrared spectroscopy (FT-IR) was applied for the confirmation of the ICs' formation. Quantification of the SEO in the inclusion complexes was performed spectrophotometrically at 273 nm using an SEO standard curve. The SEO and its inclusion complexes were evaluated for their antimicrobial activity against Escherichia coli, Staphylococcus aureus and Listeria monocytogenes. The results showed that β-CD effectively formed inclusion complexes with SEO in satisfactory yields. The antimicrobial activity of the SEO in prepared complexes with β-CD was exhibited against L. monocytogenes and S. aureus and was proportional to their concentrations but was less pronounced.

Fabrication and Applications of Potentiometric Membrane Sensors Based on γ-Cyclodextrin and Calixarene as Ionophores for the Determination of a Histamine H1-Receptor Antagonist: Fexofenadine

Supramolecular fexofenadine sensors have been constructed. Although noncovalent intermolecular and intramolecular interactions, which are far weaker than covalent contacts, are the main focus of supramolecular chemistry, they can be used to create sensors with an exceptional affinity for a target analyte. The objective of the current research study is to adapt two PVC membrane sensors into an electrochemical approach for the dosage form determination of histamine H1-receptor antagonists: fexofenadine. The general performance characteristics of two new modified potentiometric membrane sensors responsive to fexofenadine hydrochloride were established. The technique was based on the employment of γ-cyclodextrin (CD) (sensor 1), 4-tert-butylcalix[8]arene (calixarene) (sensor 2) as an ionophore, potassium tetrakis (4-chlorophenyl) borate (KTpClPB) as an ion additive, and (o-NPOE) as a plasticizer for sensors 1 and 2. The sensors showed fast responses over a wide fexofenadine concentration range (1 × 10^-2 to 4.5 (4.7) × 10^-6 M), with detection limits of 1.3 × 10^-6 M and 1.4 × 10^-6 M for sensors 1 and 2, respectively, in the pH range of 2-8. The tested sensors exhibit the fexofenadine near-Nernstian cationic response at 56 and 58 mV/decade for sensors 1 and 2, respectively. The sensors exhibit good stability, fast response times, accuracy, precision, and longer life for fexofenadine. Throughout the day and between days, the sensors exhibit good recovery and low relative standard deviations. Fexofenadine in its pure, dose form has been identified with success using the modified sensors. The sensors were employed as end-point indications for the titration of fexofenadine with NaTPB.

Influence of β-Cyclodextrin Methylation on Host-Guest Complex Stability: A Theoretical Study of Intra- and Intermolecular Interactions as Well as Host Dimer Formation

Understanding the non-covalent interactions in host-guest complexes is crucial to their stability, design and applications. Here, we use density functional theory to compare the ability of β-cyclodextrin (β-CD) and heptakis(2,6-di-O-methyl)-β-cyclodextrin (DM-β-CD) to encapsulate the model guest phenol. For both macrocycles, we quantify the intramolecular interactions before and after the formation of the complex, as well as the intermolecular host-guest and host-host dimer interactions. These are individually classified as van der Waals interactions or hydrogen bonds, respectively. The results show a stronger intramolecular binding energy of β-CD, with the absolute difference being −5.53 kcal/mol relative to DM-β-CD. Consequently, the intermolecular interactions of both cyclodextrins with phenol are affected, such that the free binding energy calculated for the DM-β-CD/phenol complex (−5.23 kcal/mol) is ≈50% more negative than for the complex with β-CD (−2.62 kcal/mol). The latter is in excellent agreement with the experimental data (−2.69 kcal/mol), which validates the level of theory (B97-3c) used. Taken together, the methylation of β-CD increases the stability of the host-guest complex with the here studied guest phenol through stronger van der Waals interactions and hydrogen bonds. We attribute this to the disruption of the hydrogen bond network in the primary face of β-CD upon methylation, which influences the flexibility of the host toward the guest as well as the strength of the intermolecular interactions. Our work provides fundamental insights into the impact of different non-covalent interactions on host-guest stability, and we suggest that this theoretical framework can be adapted to other host-guest complexes to evaluate and quantify their non-covalent interactions.

Voriconazole Eye Drops: Enhanced Solubility and Stability through Ternary Voriconazole/Sulfobutyl Ether β-Cyclodextrin/Polyvinyl Alcohol Complexes

Voriconazole (VCZ) is a broad-spectrum antifungal agent used to treat ocular fungal keratitis. However, VCZ has low aqueous solubility and chemical instability in aqueous solutions. This study aimed to develop VCZ eye drop formulations using cyclodextrin (CD) and water-soluble polymers, forming CD complex aggregates to improve the aqueous solubility and chemical stability of VCZ. The VCZ solubility was greatly enhanced using sulfobutyl ether β-cyclodextrin (SBEβCD). The addition of polyvinyl alcohol (PVA) showed a synergistic effect on VCZ/SBEβCD solubilization and a stabilization effect on the VCZ/SBEβCD complex. The formation of binary VCZ/SBEβCD and ternary VCZ/SBEβCD/PVA complexes was confirmed by spectroscopic techniques and in silico studies. The 0.5% w/v VCZ eye drop formulations were developed consisting of 6% w/v SBEβCD and different types and concentrations of PVA. The VCZ/SBEβCD systems containing high-molecular-weight PVA prepared under freeze-thaw conditions (PVA-H hydrogel) provided high mucoadhesion, sustained release, good ex vivo permeability through the porcine cornea and no sign of irritation. Additionally, PVA-H hydrogel was effective against the filamentous fungi tested. The stability study revealed that our VCZ eye drops provide a shelf-life of more than 2.5 years at room temperature, while a shelf-life of only 3.5 months was observed for the extemporaneous Vfend^® eye drops.

Conductometric Studies of Formation the Inclusion Complexes of Phenolic Acids with β-Cyclodextrin and 2-HP-β-Cyclodextrin in Aqueous Solutions

An attempt was made to evaluate the possibility of creating and assessing the stability of inclusion complexes of selected phenolic acids [trans-4-hydroxycinnamic acid (trans-p-coumaric acid), trans-3,4-dihydroxycinnamic acid (trans-caffeic acid), trans-4-hydroxy-3-methoxycinnamic acid, (trans-ferulic acid) and trans-3-phenylacrylic acid (trans-cinnamic acid)] with β-cyclodextrin and 2-HP-β-cyclodextrin in aqueous solutions in a wide temperature range 283.15 K-313.15 K. On the basis of the values of the limiting molar conductivity (Λ_CDNaDod), calculated from the experimental data, the values of the formation constants and the thermodynamic functions of formation (standard enthalpy, entropy, and Gibs standard enthalpy) of the studied complexes were determined. It has been found that the stability of the studied complexes increases with lowering of the molar mass of cyclodextrin and lowering of the temperature.

A Comprehensive Study of Gemfibrozil Complexation with β-Cyclodextrins in Aqueous Solution Using Different Analytical Techniques

Gemfibrozil (GEM) is a hypolipidemic agent, which is effective in reducing serum cholesterol and triglyceride levels. Complexation of GEM with native β-cyclodextrin (β-CD) and with the derivatives hydroxypropyl-β- and randomly methylated β-CD (HPβ-CD and Meβ-CD) was studied in aqueous solution of pH 2.8 and 7.0. The stability constants were determined by spectrofluorimetry, ¹H-NMR spectroscopy and solubility assays. Considering the well-known difficulties to obtain similar stability constants by different techniques, the agreement of the values obtained supports the reliability of the results presented. The advantages and drawbacks of each analytical technique for the study of inclusion complexation were discussed as well. In addition, the thermodynamic parameters of complexation, enthalpy (ΔH) and entropy (ΔS), were determined and related to the type of molecular interactions that take place between GEM and the different cyclodextrins. Finally, solid dispersions were prepared by co-evaporation, kneading, vacuum desiccation, and coprecipitation, and complexation was evaluated by X-ray diffraction.

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

A series of β-cyclodextrin dimers selectively permethylated on the primary or secondary rim with two different types of spacers have been synthesized effectively utilizing conventional and newly developed methods. Their structure analyses by 1H NMR and NOESY NMR imply the dependence of molecular symmetry on the type of spacer. The ability of synthesized dimers to increase the solubility of tetracene in DMSO was evaluated and compared to native cyclodextrins and their methylated derivatives. The newly synthesized compounds expressed better effectiveness than other tested supramolecular hosts.

A novel and water-soluble material for coronavirus inactivation from oseltamivir in the cavity of methyl and sulfated-β-cyclodextrins through inclusion complexation

A potentially active water-soluble anti-viral with lesser toxic material from the Oseltamivir (OTV) has been produced by the sonication method. The formed material has been further characterized by UV–visible, FT-IR, powder XRD, SEM, TGA/DTA, ROESY, XPS, AFM and etc., The results of DFT calculation have proven that inclusion complexes (ICs) are theoretically and energetically more advantageous models and structures have also been proposed based on the results. Analysis of drug release has been carried out at three pH levels, and it is revealed the analysis is most helpful at acidic pH levels for the ICs with S-CD over H-CD. Over OTV without CDs, OTV:S-CD-ICs exhibited a very less cytotoxic ability on cancer cell lines than ICs with M-CD. ICs enhanced the coronavirus inactivation nature of OTV. This study provides for the first time a full characterization of ICs of OTV with CDs and highlights the impact of complexation on pharmacological activity.

Development of Fenofibrate/Randomly Methylated β-Cyclodextrin-Loaded Eudragit® RL 100 Nanoparticles for Ocular Delivery

Fenofibrate (FE) has been shown to markedly reduce the progression of diabetic retinopathy and age-related macular degeneration in clinical trials and animal models. Owing to the limited aqueous solubility of FE, it may hamper ocular bioavailability and result in low efficiency to treat such diseases. To enhance the solubility of FE, water-soluble FE/cyclodextrin (CD) complex formation was determined by a phase-solubility technique. Randomly methylated-β-CD (RMβCD) exhibited the best solubility and the highest complexation efficiency (CE) for FE. Additionally, water-soluble polymers (i.e., hydroxypropyl methyl cellulose and polyvinyl alcohol [PVA]) enhanced the solubility of FE/RMβCD complexes. Solid- and solution-state characterizations were performed to elucidate and confirm the formation of inclusion FE/RMβCD complex. FE-loaded Eudragit^® nanoparticle (EuNP) dispersions and suspensions were developed. The physicochemical properties (i.e., pH, osmolality, viscosity, particle size, size distribution, and zeta potential) were within acceptable ranges. Moreover, in vitro mucoadhesion, in vitro release, and in vitro permeation studies revealed that the FE-loaded EuNP eye drop suspensions had excellent mucoadhesive properties and sustained FE release. The hemolytic activity, hen’s egg test on chorioallantoic membrane assay, and in vitro cytotoxicity test showed that the FE formulations had low hemolytic activity, were cytocompatible, and were moderately irritable to the eyes. In conclusion, PVA-stabilized FE/RMβCD-loaded EuNP eye drop suspensions were successfully developed, warranting further in vivo testing.

Carbon dots from eco-friendly precursors for optical sensing application: an up-to-date review

Abstract

Carbon dots (CDs) are zero-dimensional quasi-spherical nanoparticles endowed with excellent advantages including good luminescence features, photostability, low cytotoxicity, remarkable aqueous solubility, favourable biocompatibility, low risk to environment and great flexibility in surface modification. Fluorescent CDs that can selectively respond to specific inorganic/organic target molecules in environmental and biological samples are of prime significance amongst the new generation intelligent sensors due to the critical involvement of different ions/molecular species in not only human health, but also in environment processes. In this context, preparation of CDs from bioprecursors has immense significance due to the involvement of green principles, inexpensive, clean, nontoxic, easily accessible, renewable and large-scale production can be realized. This article aims at exploring different types of green raw materials including plant biomass, animal products, food items and waste materials as carbon sources for the synthesis of both undoped and doped CDs. The emphasis is given on different synthetic approaches adopted for improving the quantum yield without any chemical modification, the characterization techniques, mechanistic origin of photoluminescence and fluorescence response mechanisms involved in the sensing action towards various analytes. The significant benefits and limitations of CDs obtained from eco-friendly precursors through green approaches are summarized. Various challenges and the future prospects of these carbonaceous nanomaterials as sensors are also discussed.

Graphical abstract

Robust gelatin hydrogels for local sustained release of bupivacaine following spinal surgery

Adequate treatment of pain arising from spinal surgery is a major clinical challenge. Opioids are the mainstay of current treatment methods, but the frequency and severity of their side effects display a clear need for opioid-free analgesia. Local anesthetics have been encapsulated into sustained-release drug delivery systems to provide postoperative pain relief. However, these formulations are limited by rapid diffusion out of the surgical site. To overcome this limitation, we synthesized ring-shaped hydrogels incorporating bupivacaine, designed to be co-implanted with pedicle screws during spinal surgery. Hydrogels were prepared by riboflavin-mediated crosslinking of gelatin functionalized with tyramine moieties. Additionally, oxidized β-cyclodextrin was introduced into the hydrogel formulation to form dynamic bonds with tyramine functionalities, which enables self-healing behavior and resistance to shear. Feasibility of hydrogel implantation combined with pedicle screws was qualitatively assessed in cadaveric sheep as a model for instrumented spinal surgery. The in-situ crystallization of bupivacaine within the hydrogel matrix provided a moderate burst decrease and sustained release that exceeded 72 hours in vitro. The use of bupivacaine crystals decreased drug-induced cytotoxicity in vitro compared to bupivacaine HCl. Thus, the presented robust hydrogel formulation provides promising properties to enable the stationary release of non-opioid analgesics following spinal surgery. STATEMENT OF SIGNIFICANCE: Currently, postoperative pain following spinal surgery is mainly treated with opioids. However, the use of opioids is associated with several side effects including addiction. Here we developed robust and cytocompatible gelatin hydrogels, prepared via riboflavin-mediated photocrosslinking, that can withstand orthopedic implantation. The implantability was confirmed in cadaveric instrumented spinal surgery. Further, hydrogels were loaded with bupivacaine crystals to provide sustained release beyond 72 hours in vitro. The use of crystallized bupivacaine decreased cytotoxicity compared to bupivacaine HCl. The present formulation can aid in enabling opioid-free analgesia following instrumented spinal surgery.

Cyclodextrin Complexation of Fenofibrate by Co-Grinding Method and Monitoring the Process Using Complementary Analytical Tools

Solvent-free preparation types for cyclodextrin complexation, such as co-grinding, are technologies desired by the industry. However, in-depth analytical evaluation of the process and detailed characterization of intermediate states of the complexes are still lacking in areas. In our work, we aimed to apply the co-grinding technology and characterize the process. Fenofibrate was used as a model drug and dimethyl-β-cyclodextrin as a complexation excipient. The physical mixture of the two substances was ground for 60 min; meanwhile, samples were taken. A solvent product of the same composition was also prepared. The intermediate samples and the final products were characterized with instrumental analytical tools. The XRPD measurements showed a decrease in the crystallinity of the drug and the DSC results showed the appearance of a new crystal form. Correlation analysis of FTIR spectra suggests a three-step complexation process. In vitro dissolution studies were performed to compare the dissolution properties of the pure drug to the products. Using a solvent-free production method, we succeeded in producing a two-component system with superior solubility properties compared to both the active ingredient and the product prepared by the solvent method. The intermolecular description of complexation was achieved with a detailed analysis of FTIR spectra.

Preparation and Release of pH-Sensitive β-Cyclodextrin Derivative Micelles Loaded with Paclitaxel

In this paper, a new amphiphilic mono-6-β-cyclodextrin octadecylimine (6-β-CD-N-ODMA) copolymer was synthesized based on β-cyclodextrin and octadecylamine, which can self-assemble to form polymeric micelles. Drug-loaded micelles (a new drug carrier) were obtained using 6-β-CD-N-ODMA and paclitaxel (PTX) by the dialysis method. Orthogonal experiments were used to optimize the preparation method of the drug-loaded micelles. The drug-loading content of the carrier prepared by the optimized method was 1.97%. The physicochemical properties of blank micelles and drug-loaded micelles were evaluated by the fluorescence probe method, infrared spectra, dynamic light scattering, and scanning electron microscopy. The release properties of the carrier were investigated. The carrier has good pH sensitivity and the cumulative release rate after 96 h was 88% in PBS (pH = 5.0). The Ritger–Peppas equation is the optimal model for PTX released at pH 5.0, implying that the hydrolysis effect of 6-β-CD-N-ODMA is the main reason for PTX release. The results indicate that the developed carrier can increase the solubility of PTX and possess potential for increased clinical efficacy of PTX.

Triggered and controlled release of bioactives in food applications

Bioactive compounds (e.g., nutraceuticals, micronutrients, antimicrobial, antioxidant) are added to food products and formulations to enhance sensorial/nutritional attributes and/or shelf-life. Many of these bioactives are susceptible to degradation when exposed to environmental and processing factors. Others involve in undesirable interactions with food constituents. Encapsulation is a useful tool for addressing these issues through various stabilization mechanisms. Besides protection, another important requirement of encapsulation is to design a carrier that predictably releases the encapsulated bioactive at the target site to elicit its intended functionality. To this end, controlled release carrier systems derived from interactive materials have been developed and commercially exploited to meet the requirements of various applications. This chapter provides an overview on basic controlled and triggered release concepts relevant to food and active packaging applications. Different approaches to encapsulate bioactive compounds and their mode of release are presented, from simple blending with a compatible matrix to complex multiphase carrier systems. To further elucidate the mass transport processes, selected diffusion and empirical release kinetic models are presented, along with their brief historical significance. Finally, interactive carriers that are responsive to moisture, pH, thermal and chemical stimuli are presented to illustrate how these triggered release mechanisms can be useful for food applications.

Cyclodextrins inclusion complex: Preparation methods, analytical techniques and food industry applications

This review offers a vision of the chemical behaviour of natural ingredients, synthetic drugs and other related compounds complexed using cyclodextrins. The review takes care of different sections related to i) the inclusion complexes formation with cyclodextrins, ii) the determination of the inclusion formation constant, iii) the most used methods to prepare host inclusion in the non-polar cavity of cyclodextrins and iv) the analytical techniques to evidence host inclusion. The review provides different literature that shows the application of cyclodextrins to improve physical, chemical, and biological characteristics of food compounds including solubility, stability and their elimination/masking. Moreover, the review also offers examples of commercial food/supplement products of cyclodextrins to indicate that cyclodextrins can be used to generate biotechnological substances with innovative properties and improve the development of food products.

The determination of Sulfobutylether β-Cyclodextrin Sodium (SBECD) by LC-MS/MS and its application in remdesivir pharmacokinetics study for pediatric patients

SBECD (Captisol®) with an average degree of substitution of 6.5 sulfobutylether functional groups (SBE = 6.5), is a solubility enhancer for remdesivir (RDV) and a major component in Veklury, which was approved by FDA for the treatment of patients with COVID-19 over 12 years old and weighing over 40 kg who require hospitalization. SBECD is cleared mainly by renal filtration, thus, potential accumulation of SBECD in the human body is a concern for patients dosed with Veklury with compromised renal function. An LC-MS/MS method was developed and validated for specific, accurate, and precise determination of SBECD concentrations in human plasma. In this method, the hexa-substituted species, SBE6, was selected for SBECD quantification, and the mass transition from its dicharged molecular ion [(M-2H)/2]^2-, Molecular (parent) Ion (Q1)/Molecular (parent) Ion (Q3) of m/z 974.7/974.7, was selected for quantitative analysis of SBECD. Captisol-G (SBE-γ-CD, SBE = 3) was chosen as the internal standard. With 25 µL of formic-acid-treated sample and with a calibration range of 10.0-1000 µg/mL, the method was validated with respect to pre-established criteria based on regulatory guidelines and was applied to determine SBECD levels in plasma samples collected from pediatric patients during RDV clinical studies.

Chiral induction in a novel self-assembled supramolecular system composed of α-cyclodextrin porous liquids, chiral silver nanoparticles and planar conjugated molecules

The newly developed porous liquids known as liquids with permanent microporosity, have considerable application potential in many unknown areas. Herein, a supramolecular system composed of α-cyclodextrin porous liquid, chiral silver nanoparticles and planar conjugated molecules (methylene blue and indigo carmine) was designed and the induced chirality of the system was observed. It was found that the induced chirality can be easily tuned by changing the pH value of the mixture solution. The induced chiral signal of methylene blue in the developed self-assembled supramolecular system occurred when the pH was between 8 and 10, and furthermore the induced chirality of indigo carmine was found when the pH was between 6.5 and 7.5. The intensity of induced chirality decreases upon increasing temperatures and ionic strength. This study may offer a new approach for the creation of a chiral supramolecular system based on host-guest and electrostatic interaction and make cyclodextrin porous liquids promising candidates for applications in chiral induction.

Fabrication of Nanofibers Based on Hydroxypropyl Starch/Polyurethane Loaded with the Biosynthesized Silver Nanoparticles for the Treatment of Pathogenic Microbes in Wounds

Fabrication of electrospun nanofibers based on the blending of modified natural polymer, hydroxyl propyl starch (HPS) as one of the most renewable resources, with synthetic polymers, such as polyurethane (PU) is of great potential for biomedical applications. The as-prepared nanofibers were used as antimicrobial sheets via blending with biosynthesized silver nanoparticles (AgNPs), which were prepared in a safe way with low cost using the extract of Nerium oleander leaves, which acted as a reducing and stabilizing agent as well. The biosynthesized AgNPs were fully characterized by various techniques (UV-vis, TEM, DLS, zeta potential and XRD). The obtained results from UV-vis depicted that the AgNPs appeared at a wavelength equal to 404 nm affirming the preparation of AgNPs when compared with the wavelength of extract (there are no observable peaks). The average particle size of the fabricated AgNPs that mediated with HPS exhibited a very small size (less than 5 nm) with excellent stability (more than -30 mv). In addition, the fabricated nanofibers were also fully characterized and the obtained data proved that the diameter of nanofibers was enlarged with increasing the concentration of AgNPs. Additionally, the findings illustrated that the pore sizes of electrospun sheets were in the range of 75 to 350 nm. The obtained results proved that the presence of HPS displayed a vital role in decreasing the contact angle of PU nanofibers and thus, increased the hydrophilicity of the net nanofibers. It is worthy to mention that the prepared nanofibers incorporated with AgNPs exhibited incredible antimicrobial activity against pathogenic microbes that actually presented in human wounds. Moreover, P. aeruginosa was the most sensitive species to the fabricated nanofibers compared to other tested ones. The minimal inhibitory concentrations (MICs) values of AgNPs-3@NFs against P. aeruginosa, and E. faecalis, were 250 and 500 mg/L within 15 min, respectively.

The Role of Cyclodextrins in the Design and Development of Triterpene-Based Therapeutic Agents

Triterpenic compounds stand as a widely investigated class of natural compounds due to their remarkable therapeutic potential. However, their use is currently being hampered by their low solubility and, subsequently, bioavailability. In order to overcome this drawback and increase the therapeutic use of triterpenes, cyclodextrins have been introduced as water solubility enhancers; cyclodextrins are starch derivatives that possess hydrophobic internal cavities that can incorporate lipophilic molecules and exterior surfaces that can be subjected to various derivatizations in order to improve their biological behavior. This review aims to summarize the most recent achievements in terms of triterpene:cyclodextrin inclusion complexes and bioconjugates, emphasizing their practical applications including the development of new isolation and bioproduction protocols, the elucidation of their underlying mechanism of action, the optimization of triterpenes’ therapeutic effects and the development of new topical formulations.

Cyclodextrins in Polymer-Based Active Food Packaging: A Fresh Look at Nontoxic, Biodegradable, and Sustainable Technology Trends

Using cyclodextrins (CDs) in packaging technologies helps volatile or bioactive molecules improve their solubility, to guarantee the homogeneous distribution of the complexed molecules, protecting them from volatilization, oxidation, and temperature fluctuations when they are associated with polymeric matrices. This technology is also suitable for the controlled release of active substances and allows the exploration of their association with biodegradable polymer targeting to reduce the negative environmental impacts of food packaging. Here, we present a fresh look at the current status of and future prospects regarding the different strategies used to associate cyclodextrins and their derivatives with polymeric matrices to fabricate sustainable and biodegradable active food packaging (AFP). Particular attention is paid to the materials and the fabrication technologies available to date. In addition, the use of cutting-edge strategies, including the trend of nanotechnologies in active food packaging, is emphasized. Furthermore, a critical view on the risks to human health and the associated updated legislation is provided. Some of the more representative patents and commercial products that currently use AFP are also listed. Finally, the current and future research challenges which must be addressed are discussed.

Effect of Soluplus® on γ-cyclodextrin solubilization of irbesartan and candesartan and their nanoaggregates formation

The poor aqueous solubility of irbesartan (IRB) and candesartan cilexetil (CAC) may hamper their bioavailability when orally or topically administered. Among several attempts, the promising nanoaggregate formation by γ-cyclodextrin (γCD) complexation of drugs in aqueous solution with or without water-soluble polymers was investigated. According to phase solubility studies, Soluplus® showed the highest complexation efficiency (CE) of drug/γCD complexes among the polymers tested. The aqueous solubility of IRB and CAC was markedly increased as a function of Soluplus^® concentrations. The binary drug/γCD and ternary drug/γCD/Soluplus^® complex formations were supported and confirmed by solid-state characterizations, including differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared (FT-IR) spectroscopy. The true inclusion mode was also proved by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The nanoaggregate size and morphology of binary and ternary systems were observed using dynamic light scattering (DLS), and transmission electron microscopy (TEM) techniques. The size of these nanocarriers depends on the concentration of Soluplus^®. The use of Soluplus^® could significantly enhance drug solubility and stabilize complex nanoaggregates, which could be a prospective platform for drug delivery systems.