Immobilized aptamer paper spray ionization source for ion mobility spectrometry

Coated Blade Spray Ion Mobility Spectrometry

Coated blade spray (CBS) is a microextraction technology with blades that serve as both the extraction device and the electrospray ionization (ESI) emitter. CBS is designed for easy and rapid extraction of analytes in complex matrices as well as ESI directly from the blade. The technology selectively enriches the components of interest on a coated metal blade. The coating consists of a selective polymer. So far, CBS has only been coupled with mass spectrometry but never with ion mobility spectrometry (IMS), where ions are separated and detected based on their ion mobility in a drift gas under the influence of an electric field, while instrumentation is compact and easy to operate so that the advantages of CBS can be particularly well exploited. Therefore, this work focuses on coupling CBS with our previously described ESI-IMS. The ion mobility spectrometer has a drift length of only 75 mm and provides a high resolving power of RP = 100. In this work, preliminary measurements of CBS-IMS are presented. In particular, the detection of benzodiazepines and ketamine in drinks and the pesticide isoproturon in water samples is shown to demonstrate the feasibility of CBS-IMS.

Systematic Optimization of Ambient Ionization Ion Mobility Mass Spectrometry for Rapid Separation of Isomers

Current methods typically used for metabolite screening and disease diagnosis often require extensive sample preparation, which increases analysis time and associated costs. While ambient ionization techniques enable the analysis of various samples in complex matrices with little or no sample preparation in a short time (typically within a minute), their reduced selectivity, even when coupled with high-resolution mass spectrometers, limits their application in certain fields. In this study, we have optimized the coupling of paper spray (PS) and leaf spray (LS) ambient ionization techniques with a commercially available ion mobility mass spectrometer (IM-MS) and demonstrated the separation of geometric and constitutional isomers. Ambient ionization techniques allow simultaneous introduction and ionization of samples, while background noise and matrix interference from paper and leaf substrates are filtered out by IM separation, resulting in high sensitivity and selectivity of the PS-IM-MS and LS-IM-MS workflows. In addition, we introduced a novel approach to perform single-field collision cross section (CCS) measurements, which resulted in CCS values that differ by 0.15% and 0.25% from traditional stepped-field and single-field methods, respectively. In addition, we used advanced computational tools to confidently identify analyte structures by comparing CCS values from experimental IM measurements and theoretical calculations. These results suggest that the coupling of ambient ionization methods with ion mobility techniques enables rapid, sensitive, and highly selective analysis that can be used in different fields, such as agrochemical screening and disease diagnostics.

Ionization of glycans from alkali metal salt-impregnated paper

Ambient ionization of glycans is simply and efficiently achieved by spraying from an alkali metal salt-impregnated paper surface. Monosaccharides, oligosaccharides and ring glycans easily form abundant alkali metal adduct ions, and give simple and clean high-quality mass spectra. The enhancement is specific for glycans, compared to a wide variety of non-glycan compounds present in a matrix. In addition, molecular weight of unknown glycans can be further identified based on the ion mass difference of various alkali metal adduct ions from a certain compound when using a mixed salt-impregnated paper containing five cation salts. Successful determination of glycans and glycoconjugates in plant extracts, honey, blood and urine demonstrates the practicability of this approach to complicated matrices, especially biological matrices.

Hyphenated sample preparation-electrospray and nano-electrospray ionization mass spectrometry for biofluid analysis

Stand-alone electrospray ionization mass spectrometry (ESI-MS) has been advancing through enhancements in throughput, selectivity and sensitivity of mass spectrometers. Unlike traditional MS techniques which usually require extensive offline sample preparation and chromatographic separation, many sample preparation techniques are now directly coupled with stand-alone MS to enable outstanding throughput for bioanalysis. In this review, we summarize the different sample clean-up and/or analyte enrichment strategies that can be directly coupled with ESI-MS and nano-ESI-MS for the analysis of biological fluids. The overview covers the hyphenation of different sample preparation techniques including solid phase extraction (SPE), solid phase micro-extraction (SPME), slug flow micro-extraction/nano-extraction (SFME/SFNE), liquid extraction surface analysis (LESA), extraction electrospray, extraction using digital microfluidics (DMF), and electrokinetic extraction (EkE) with ESI-MS and nano-ESI-MS.

Monoclonal Antibodies Application in Lateral Flow Immunochromatographic Assays for Drugs of Abuse Detection

Lateral flow assays (lateral flow immunoassays and nucleic acid lateral flow assays) have experienced a great boom in a wide variety of early diagnostic and screening applications. As opposed to conventional examinations (High Performance Liquid Chromatography, Polymerase Chain Reaction, Gas chromatography-Mass Spectrometry, etc.), they obtain the results of a sample's analysis within a short period. In resource-limited areas, these tests must be simple, reliable, and inexpensive. In this review, we outline the production process of antibodies against drugs of abuse (such as heroin, amphetamine, benzodiazepines, cannabis, etc.), used in lateral flow immunoassays as revelation or detection molecules, with a focus on the components, the principles, the formats, and the mechanisms of reaction of these assays. Further, we report the monoclonal antibody advantages over the polyclonal ones used against drugs of abuse. The perspective on aptamer use for lateral flow assay development was also discussed as a possible alternative to antibodies in view of improving the limit of detection, sensitivity, and specificity of lateral flow assays.

Food safety and quality assessment: comprehensive review and recent trends in the applications of ion mobility spectrometry (IMS)

Ion mobility spectrometry (IMS) is an analytical separation and diagnostic technique that is simple and sensitive and a rapid response and low-priced technique for detecting trace levels of chemical compounds in different matrices. Chemical agents and environmental contaminants are successfully detected by IMS and have been recently considered to employ in food safety. In addition, IMS uses stand-alone or coupled analytical diagnostic tools with chromatographic and spectroscopic methods. Scientific publications show that IMS has been applied 21% in the pharmaceutical industry, 9% in environmental studies and 13% in quality control and food safety. Nevertheless, applications of IMS in food safety and quality analysis have not been adequately explored. This review presents the IMS-related analysis and focuses on the application of IMS in food safety and quality. This review presents the important topics including detection of traces of chemicals, rate of food spoilage and freshness, food adulteration and authenticity as well as natural toxins, pesticides, herbicides, fungicides, veterinary, and growth promoter drug residues. Further, persistent organic pollutants (POPs), acrylamide, polycyclic aromatic hydrocarbon (PAH), biogenic amines, nitrosamine, furfural, phenolic compounds, heavy metals, food packaging materials, melamine, and food additives were also examined for the first time. Therefore, it is logical to predict that the application of the IMS technique in food safety, food quality, and contaminant analysis will be impressively increased in the future. HighlightsCurrent status of IMS for residues and contaminant detection in food safety.To assess all the detected contaminants in food safety, for the first time.Identified IMS-related parameters and chemical compounds in food safety control.

In-situ formation of Zn-Al layered double oxides on electrochemically anodized nanoporous aluminum film as sorbent for chlorophenols extraction from water and wastewater followed by determination using HPLC

Herein, we present a simple, cost-effective, and robust strategy for the in-situ preparation of Zn-Al layered double oxides-anodized aluminum thin film via a facile hydrothermal method, followed by calcination treatment of the Zn-Al layered double hydroxide in the air atmosphere. The in-situ prepared Zn-Al layered double oxide-anodized aluminum film was implemented as sorbent for thin film microextraction of four selected chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol), followed by high-performance liquid chromatography-ultraviolet detection. The different variables of the thin film microextraction were screened via Plackett-Burman design and then optimized through Box-Behnken design. Under the optimum condition, the method showed good linear ranges (0.2-200 μg/L) with the coefficient of determinations higher than 0.9938. The calculated limit of detections were between 0.07 and 0.56 μg/L. Relative standard deviations of the method for determination of the analytes at 5 μg/L concentration level (n = 3) were ranged from 3.5 to 3.9% (as interday). The enrichment factors were between 39 and 58. This extraction method was demonstrated to be fast, efficient, and convenient. To study the capability of the developed method for real sample analysis, tap, well, river, and two types of wastewater samples were satisfactorily analyzed.

Pesticide Aptasensors-State of the Art and Perspectives

Contamination by pesticides in the food chain and the environment is a worldwide problem that needs to be actively monitored to ensure safety. Unfortunately, standard pesticide analysis based on mass spectrometry takes a lot of time, money and effort. Thus, simple, reliable, cost-effective and field applicable methods for pesticide detection have been actively developed. One of the most promising technologies is an aptamer-based biosensor or so-called aptasensor. It utilizes aptamers, short single-stranded DNAs or RNAs, as pesticide recognition elements to integrate with various innovative biosensing technologies for specific and sensitive detection of pesticide residues. Several platforms for aptasensors have been dynamically established, such as colorimetry, fluorometry, electrochemistry, electrochemiluminescence (ECL) and so forth. Each platform has both advantages and disadvantages depending on the purpose of use and readiness of technology. For example, colorimetric-based aptasensors are more affordable than others because of the simplicity of fabrication and resource requirements. Electrochemical-based aptasensors have mainly shown better sensitivity than others with exceedingly low detection limits. This paper critically reviews the progression of pesticide aptasensors throughout the development process, including the selection, characterization and modification of aptamers, the conceptual frameworks of integrating aptamers and biosensors, the ASSURED (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free and deliverable to end users) criteria of different platforms and the future outlook.

Solvent-Assisted Paper Spray Ionization Mass Spectrometry (SAPSI-MS) for the Analysis of Biomolecules and Biofluids

Paper Spray Ionization (PSI) is commonly applied for the analysis of small molecules, including drugs, metabolites, and pesticides in biological fluids, due to its high versatility, simplicity, and low costs. In this study, a new setup called Solvent Assisted Paper Spray Ionization (SAPSI), able to increase data acquisition time, signal stability, and repeatability, is proposed to overcome common PSI drawbacks. The setup relies on an integrated solution to provide ionization potential and constant solvent flow to the paper tip. Specifically, the ion source was connected to the instrument fluidics along with the voltage supply systems, ensuring a close control over the ionization conditions. SAPSI was successfully applied for the analysis of different classes of biomolecules: amyloidogenic peptides, proteins, and N-glycans. The prolonged analysis time allowed real-time monitoring of processes taking places on the paper tip, such as amyloid peptides aggregation and disaggregation phenomena. The enhanced signal stability allowed to discriminate protein species characterized by different post translational modifications and adducts with electrophilic compounds, both in aqueous solutions and in biofluids, such as serum and cerebrospinal fluid, without any sample pretreatment. In the next future, application to clinical relevant modifications, could lead to the development of quick and cost-effective diagnostic tools.

Molecularly imprinted graphite spray ionization-ion mobility spectrometry: application to trace analysis of the pesticide propoxur

A porous graphite sheet modified by a molecularly imprinted polymer (MIP) was directly used as the spray ionization source for ion mobility spectrometry (IMS). Therefore, it was possible to selectively analyze samples extracted by the molecularly imprinted polymer. This obviates the need for the steps of elution, solvent evaporation, dissolution and injection. To prepare the sheet, the graphite surface was first modified by electrodeposition of a molecularly imprinted polypyrrole film. This polypyrrole film was fabricated in a three-electrode electrochemical system using cyclic voltammetry. The electropolymerization of the graphite sheet was carried out with LiClO₄ as a supporting electrolyte in the reaction solution. The effects of the amount of monomer, the level of template concentrations, and the time of polymerization on the extraction efficiency of the MIP film were evaluated. The extraction conditions including extraction time, the extraction temperature, the pH values, the salt concentrations, and the stirring rate were also studied. Methanol was selected as the most suitable solvent for both desorption and ionization which occur simultaneously. The pesticide propoxur (acting as a test compound) was extracted from water samples and directly analyzed using IMS. The analytical parameters (working range: 1.0 to 250 ng·mL^-1; detection limit: 0.3 ng·mL^-1) indicated that the direct coupling of MIP and IMS has a great potential in terms of reproducibility, and speed of the analysis, while maintaining acceptable sensitivity. Graphical abstract Schematic presentation of molecularly imprinted graphite spray ionization coupled with ion mobility spectrometry (IMS) for rapid/selective extraction and ionization: Application to the pre-concentration of propoxur prior to its quantification by IMS.

Porous graphite sheet spray ionization ion mobility spectrometry

In this work, a porous graphite sheet is introduced as the substrate in a spray ionization source for ion mobility spectrometry (PGSI-IMS) for the first time. This ionization source has some important advantages in comparison with the hollow needle, which is conventionally used in electrospray ionization. In order to prepare the hydrophilic surface needed to load samples on a graphite substrate, the graphite sheet was treated with hot sulfuric acid solution for 2 hours. Some parameters affecting the ionization efficiency were studied, and the optimized conditions were found to be 3.5-kV graphite voltage, 24-μL methanol flow rate, 500 mL min^-1 the gas flow rate, and graphite sheet with a 60° tip angle and 3-mm distance from the counter electrode. Finally, analyses of some test compounds (imipramine, diclofenac, codeine, morphine, and ethion) were conducted to evaluate the capability of the new ionization source in the positive and negative modes. The satisfactory results proved the capability of the graphite sheet spray ionization, to be conveniently used for routine analysis of chemical compounds by IMS.

Paper spray ionization mass spectrometry: recent advances and clinical applications

INTRODUCTION

Paper spray mass spectrometry has provided a rapid, quantitative ambient ionization method for xenobiotic and biomolecule analysis. As an alternative to traditional sample preparation and chromatography, paper spray demonstrates the sampling ionization of a wide range of molecules and significant sensitivity from complex biofluids. The amenability of paper spray with dried blood spots and other sampling types shows strong potential for rapid, point-of-care (POC) analysis without time-consuming separation procedures. Areas covered: This special report summarizes the current state and advances in paper spray mass spectrometry that relate to its applicability for clinical analysis. It also provides our perspectives on the future development of paper spray mass spectrometry and its potential roles in clinical settings. Expert commentary: Paper spray has provided the fundamental aspects of ambient ionization needed for implementation at the POC. With further clinical management and standardization, paper spray has the potential to replace traditional complex analysis procedure for rapid quantitative detection of illicit drugs, therapeutic drugs and metabolites. Surface and substrate modifications also offer significant improvement in desorption and ionization efficiencies, resulting in enhanced sensitivity. Comprehensive analysis of metabolites and lipids will further extend the implementation of paper spray ionization mass spectrometry into clinical applications.

Trace analysis by ion mobility spectrometry: From conventional to smart sample preconcentration methods. A review

Ion mobility spectrometry (IMS) is a rapid and high sensitive technique widely used in security and forensic areas. However, a lack of selectivity is usually observed in the analysis of complex samples due to the scarce resolution of the technique. The literature concerning the use of conventional and novel smart materials in the pretreatment and preconcentration of samples previous to IMS determinations has been critically reviewed. The most relevant strategies to enhance selectivity and sensitivity of IMS determinations have been widely discussed, based in the use of smart materials, as immunosorbents, aptamers, molecularly imprinted polymers (MIPs), ionic liquids (ILs) and nanomaterial. The observed trend is focused on the development of IMS analytical methods in combination of selective sample treatments in order to achieve quick, reliable, sensitive, and selective methods for the analysis of complex samples such as biological fluids, food, or environmental samples.

Integration of paper spray ionization high-field asymmetric waveform ion mobility spectrometry for forensic applications

RATIONALE

Paper spray ionization (PSI) is an attractive ambient ionization source for mass spectrometry (MS) since it allows the combination of surface sampling and ionization. The minimal sample preparation inherent in this approach greatly reduces the time needed for analysis. However, the ions generated from interfering compounds in the sample and the paper substrate may interfere with the analyte ions. Therefore, the integration of PSI with high-field asymmetric ion mobility spectrometry (FAIMS) is of significant interest since it should reduce the background ions entering the mass analyzer without complicating the analysis or increasing analysis time. Here we demonstrate the integration of PSI with FAIMS/MS and its potential for analysis of samples of forensic interest.

METHODS

In this work, the parameters that can influence the integration, including sampling and ionization by paper spray, the FAIMS separation of analytes from each other and background interferences, and the length of time that a usable signal can be observed for explosives on paper, were evaluated with the integrated system.

RESULTS

In the negative ion analysis of 2,4,6-trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), amounts as low as 1 ng on paper were readily observed. The successful positive ion separation of a set of illicit drugs including heroin, methamphetamine, and cocaine was also achieved. In addition, the positive ion analysis of the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP) was evaluated.

CONCLUSIONS

The integration of PSI-FAIMS/MS was demonstrated for the analyses of explosives in negative ion mode and for illicit drugs and CW simulants in positive mode. Paper background ions that could interfere with these analyses were separated by FAIMS. The compensation voltage of an ion obtained by FAIMS provided an additional identification parameter to be combined with the mass spectrum for each analyte.

Aptamer-modified carbon nanomaterial based sorption coupled to paper spray ion mobility spectrometry for highly sensitive and selective determination of methamphetamine

A cellulose paper was modified with an aptamer against methamphetamine on either carbon dots (CDs) or on multichannel carbon nanotubes (CNTs). The resulting sorbent was applied to the extraction of METH from blood or saliva. The METH-loaded paper than also was directly applied as a paper spray ionization source in ion mobility spectrometry. The carbon nanomaterial enhances sensitivity, and the aptamer enhances selectivity. The materials were covalently bound to the paper on one side, while the aptamer was immobilized on the other. After optimization of the extraction process and instrumental parameters, the limits of detection when using the aptamer-CNT modified paper are 0.6 ng·mL^-1 for saliva, and 0.45 ng·mL^-1 for plasma. The respective values when using aptamer-CD modified paper are 1.5 ng·mL^-1 for saliva and 0.9 ng·mL^-1 for plasma. Calibration plots are linear in the 2 to 150 ng·mL^-1 METH concentration range for saliva, and in the 1.5 to 200 ng·mL^-1 concentration ranges for blood when using the aptamer-CNT based method. When using the aptamer-CDs, the dynamic ranges extend from 5 to 200 ng·mL^-1 and from 3 to 250 ng·mL^-1, respectively. The method was applied to the determination of METH in real samples of saliva and blood, and the accuracy of the method was confirmed by comparison of the results with data analyzed by GC-MS. Graphical abstract ᅟ.