Electrochemical carbon based nanosensors: A promising tool in pharmaceutical and biomedical analysis

Revolutionizing cancer monitoring with carbon-based electrochemical biosensors

Cancer monitoring plays a critical role in improving patient outcomes by providing early detection, personalized treatment options, and treatment response tracking. Carbon-based electrochemical biosensors have emerged in recent years as a revolutionary technology with the potential to revolutionize cancer monitoring. These sensors are useful for clinical applications because of their high sensitivity, selectivity, rapid response, and compatibility with miniaturized equipment. This review paper gives an in-depth look at the latest developments and the possibilities of carbon-based electrochemical sensors in cancer surveillance. The essential principles of carbon-based electrochemical sensors are discussed, including their structure, operating mechanisms, and critical qualities that make them suited for cancer surveillance. Furthermore, we investigate their applicability in detecting specific cancer biomarkers, evaluating therapy responses, and detecting cancer recurrence early. Additionally, a comparison of carbon-based electrochemical sensor performance measures, including sensitivity, selectivity, accuracy, and limit of detection, is presented in contrast to existing monitoring methods and upcoming technologies. Finally, we discuss prospective tactics, future initiatives, and commercialization opportunities for improving the capabilities of these sensors and integrating them into normal clinical practice. The review highlights the potential impact of carbon-based electrochemical sensors on cancer diagnosis, treatment, and patient outcomes, as well as the importance of ongoing research, collaboration, and validation studies to fully realize their potential in revolutionizing cancer monitoring.

Plasmonic nanosensors for pharmaceutical and biomedical analysis

The detection and identification of clinical biomarkers with related sensitivity have become a source of considerable concern for biomedical analysis. There have been increasing efforts toward the development of single-molecule analytical platforms to overcome this concern. The latest developments in plasmonic nanomaterials include fascinating advances in energy, catalyst chemistry, optics, biotechnology, and medicine. Nanomaterials can be successfully applied to biomolecule and drug detection in plasmonic nanosensors for pharmaceutical and biomedical analysis. Plasmonic-based sensing technology exhibits high sensitivity and selectivity depending on surface plasmon resonance (SPR) or localized surface plasmon resonance (LSPR) phenomena. In this critical paper, we offer an overview of the methodology of the SPR, LSPR, surface-enhanced Raman scattering (SERS), surface-enhanced infrared absorption (SEIRA), surface-enhanced fluorescence (SEF), and plasmonic nanoplatforms advanced for pharmaceutical and biomedical applications. First of all, we present here a brief discussion of the above trends. We have devoted the last section to the explanation of SPR, LSPR, SERS, SEIRA, and SEF platforms, which have found a wide range of applications, and reviewed recent advances for biomedical and pharmaceutical analysis.

Two birds with one stone: integrating exfoliation and immunoaffinity properties in multi-walled carbon nanotubes by non-covalent functionalization with human immunoglobulin G

An innovative strategy is proposed to simultaneously exfoliate multi-walled carbon nanotubes (MWCNTs) and generate MWCNTs with immunoaffinity properties. This strategy was based on the non-covalent functionalization of MWCNTs with human immunoglobulin G (IgG) by sonicating 2.5 mg mL^-1 MWCNTs in 2.0 mg mL^-1 IgG for 15 min with sonicator bath. Impedimetric experiments performed at glassy carbon electrodes (GCE) modified with the resulting MWCNT-IgG nanohybrid in the presence of anti-human immunoglobulin G antibody (Anti-IgG) demonstrated that the immunoglobulin retains their biorecognition properties even after the treatment during the MWCNT functionalization. We proposed, as proof-of-concept, two model electrochemical sensors, a voltammetric one for uric acid quantification by taking advantages of the exfoliated MWCNTs electroactivity (linear range, 5.0 × 10^-7 M - 5.0 × 10^-6 M; detection limit, 165 nM) and an impedimetric immunosensor for the detection of Anti-IgG through the use of the bioaffinity properties of the IgG present in the nanohybrid (linear range, 5-50 µg mL^-1; detection limit, 2 µg mL^-1).

Functional Micro-/Nanostructures in Agrofood Science: Precise Inspection, Hazard Elimination, and Potential Health Risks

Nanotechnology, biotechniques, and chemical engineering have arisen as new trends with significant impacts on agrofood science development. Advanced analytical techniques with high sensitivity, specificity, and automation based on micro-/nanomaterials for food hazard elimination have become leading research hotspots in agrofood science. Research progress in micro-/nanomaterials has provided a solid theoretical basis and technical support to solve problems in the industry. However, the rapid development of micro-/nanostructures has also raised concerns regarding potential risks to human health. This review presents the latest advances in the precise inspection and elimination of food hazards from micro-/nanomaterials and discusses the potential threats to human health posed by nanomaterials. The theoretical reference was provided for the application trend of micro-/nanomaterials in the field of agrofood science in the future.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

N-Methylfulleropyrrolidine-Based Multimode Sensor for Determination of Butoconazole Nitrate

A multimode sensor (a sensor responding simultaneously to more than one mode, e.g., stochastic mode, amperometric mode, voltammetric mode) based on graphite paste modified with N-methylfulleropyrrolidine was proposed for the determination of butoconazole nitrate in its pharmaceutical formulation. The stochastic mode and square wave voltammetry mode were applied for the determinations. Both the stochastic mode and square wave voltammetry mode were applied for a qualitative and quantitative assay of butoconazole nitrate. The sensor can be used between 1.68 × 10^-6 and 1.68 × 10⁴ μmol L^-1 when the stochastic mode is used and between 0.168 and 16.80 μmol L^-1 when the square wave voltammetry mode is used. The multimode sensor was reliably used for the determination of butoconazole nitrate in its pharmaceutical formulation, Gynofort cream, the recorded recoveries being higher than 99.00%, with RSD (%) values of lower than 2.00%.

Highly sensitive and simultaneous electrochemical determinations of non-steroidal anti-inflammatory drugs in water using nanostructured carbon-based paste electrodes

Simple and fast simultaneous quantifications in water of anti-inflammatory drugs, which belong to the emerging pollutants, represents a great challenge for water quality control. The development of electrochemical methods to meet the simultaneous and concomitant detection requirements depends mainly on the electrode material. The fullerene‑carbon nanofiber (FULL/CNF) and graphene‑carbon nanotubes (GR/CNT) paste electrodes as sensing elements were employed for the first time for the determination of diclofenac (DCF), naproxen (NPX) and ibuprofen (IBP) simultaneously and concomitantly. The comparative morphostructural and electrochemical characterizations of both electrodes were achieved by scanning electron microscopy (SEM) and cyclic voltammetry (CV). Differential-pulsed voltammetry (DPV), chronoamperometry (CA) and multiple-pulsed amperometry (MPA) were used for detection tests. FULL/CNF electrode was suitable to develop a simultaneous DPV-based detection methodology that allowed reaching the lowest limit of detections of 0.230 nM for DCF, 0.310 nM for NPX and 0.180 nM for IBP. GR/CNT electrode did not provide stability for DPV-based detection, but the lowest limits of detection of 0.149 nM for DCF, 0.809 nM for NPX and 0.640 nM for IBP were achieved by MPA-based methodology. Both electrodes, linked to specific detection technique, showed good reproducibility, stability and ability to measure DCF, NPX and IBP simultaneously in aqueous solution. The satisfactory results achieved by analysis of real surface water sample (Bega River, Timisoara city, Romania) indicated that the proposed voltammetric and amperometric methodologies using both electrodes have great potential for practical applications in analysis of different water samples.

Nanomaterial-based sandwich-type electrochemical aptasensor platform for sensitive voltammetric determination of leptin

A sandwich-type electrochemical aptasensor was designed for sensitive detection of leptin in biological samples, including human serum and human plasma. The developed aptasensor was produced by electrodeposition of gold nanoparticles on a screen-printed electrode modified with zinc oxide nanoparticles. The synergy effect of zinc oxide and gold nanoparticles improved the electrocatalytic activity of the aptasensor. The obtained high surface area allowed more aptamer molecules to be loaded on the electrode surface. Signal amplification significantly increases the detection sensitivity of a developed biosensor. Although the use of nanomaterials is the most preferred detection tool for this purpose, as an alternative, enzyme-catalyzed signal amplification is widely used in the construction of a biosensor due to its specificity and high catalytic efficiency. Therefore, both nanomaterial-supported and an alkaline phosphatase-based aptasensor design were developed, which can produce in situ electroactive product by enzymatic hydrolysis of the inactive substrate to achieve a higher signal-to-background ratio. Under optimal conditions, the developed aptasensor exhibited a wide linear concentration range from 0.01 pg mL^-1 to 100.0 pg mL^-1 with a detection limit of 0.0035 pg mL^-1. While the developed aptasensor provided excellent selectivity in the presence of some interfering compounds, it possessed outstanding reproducibility and stability. In addition, the developed aptasensor has been applied with good recoveries in the range 96.31 to 108.79% in human serum and plasma samples. In conclusion, all the obtained results showed the feasibility of the developed aptasensor for practical applications.

Carbon Nanomaterial-Based Drug Sensing Platforms Using State-of-the- Art Electroanalytical Techniques

Background:

Currently, nanotechnology and nanomaterials are considered as the most popular and outstanding research subjects in scientific fields ranging from environmental studies to drug analysis. Carbon nanomaterials such as carbon nanotubes, graphene, carbon nanofibers etc. and non-carbon nanomaterials such as quantum dots, metal nanoparticles, nanorods etc. are widely used in electrochemical drug analysis for sensor development. Main aim of drug analysis with sensors is developing fast, easy to use and sensitive methods. Electroanalytical techniques such as voltammetry, potentiometry, amperometry etc. which measure electrical parameters such as current or potential in an electrochemical cell are considered economical, highly sensitive and versatile techniques.

Methods:

Most recent researches and studies about electrochemical analysis of drugs with carbon-based nanomaterials were analyzed. Books and review articles about this topic were reviewed.

Results:

The most significant carbon-based nanomaterials and electroanalytical techniques were explained in detail. In addition to this; recent applications of electrochemical techniques with carbon nanomaterials in drug analysis was expressed comprehensively. Recent researches about electrochemical applications of carbon-based nanomaterials in drug sensing were given in a table.

Conclusion:

Nanotechnology provides opportunities to create functional materials, devices and systems using nanomaterials with advantageous features such as high surface area, improved electrode kinetics and higher catalytic activity. Electrochemistry is widely used in drug analysis for pharmaceutical and medical purposes. Carbon nanomaterials based electrochemical sensors are one of the most preferred methods for drug analysis with high sensitivity, low cost and rapid detection.

Electrochemical Method for Ease Determination of Sodium Diclofenac Trace Levels in Water Using Graphene-Multi-Walled Carbon Nanotubes Paste Electrode

Sodium diclofenac (DCF) presence reported in water use cycle at various concentrations including trace levels necessitates continuous development of advanced analytical method for its determination. In this work, ease electrochemical methods for DCF determination based on voltammetric and amperometric techniques were proposed using a simple combination of graphene with multi-walled carbon nanotubes as paste electrode. Integration of the graphene with multi-walled carbon nanotubes enlarged the electroactive surface area of the electrode and implicitly enhanced the electrochemical response for DCF determination. On the basis of the sorption autocatalytic effect manifested at low concentration of DCF, we found that the preconcentration step applied prior to differential-pulsed voltammetry (DPV) and multiple-pulsed amperometry (MPA) allowed for the enhancement of the electroanalytical performance of the DCF electrochemical detections, which were validated by testing in tap water. The lowest limit of detection (LOD) of 1.40 ng·L⁻¹ was found using preconcentration prior to DPV under optimized operating conditions, which is better than that reached by other carbon-based electrodes reported in the literature.

Antidepressants determination using an electroanalytical approach: A review of methods

Antidepressants are the pharmaceutical compounds used in the treatment of depression, anxiety disorders and all related disturbances promoted by genetic factors, environmental problems or modern lifestyles. Nonetheless, the inadequate ingestion of antidepressants provokes adverse effects in the human body and can contaminate the environment. For this reason, it is necessary to identify and quantify these compounds in biological fluids, natural water, wastewater, and pharmaceutical formulations. Consequently, this review presents the main electroanalytical techniques used in the analysis of antidepressants, indicating the advantages, which include low cost, suitable analytical parameters, simplified sample preparation steps, easy operation and reduced time for completion of the analysis. Reports in specialized literature, published from 2000 to 2020, are presented and some are discussed, demonstrating that the electroanalytical techniques can be employed, with success, in the determination of antidepressants, indicating alternative methodologies to improve analytical parameters and minimize the use and generation of toxic residues.

Phenolic water toxins: redox mechanism and method of their detection in water and wastewater

Phenolic pollutants are highly toxic and persistent in the environment. Their efficient detection is a pressing social demand. In this regard we introduce a novel ultrasensitive electroanalytical platform for the individual and synchronized detection of three phenolic isomers commonly known as hydroquinone (HQ), resorcinol (RC), and catechol (CC). The sensing device consists of a glassy carbon electrode (GCE) modified with functionalized carbon nanotubes (fCNTs) and gold-silver (Au-Ag NPs) bimetallic nanoparticles. The sandwiched scaffold represented as fCNTs/Au-Ag NPs/fCNTs/GCE efficiently senses HQ, RC, and CC with detection limits of 28.6 fM, 36.5 fM and 42.8 fM respectively. The designed sensor is more promising than reported sensors for phenolic toxins in the context of high sensitivity, selectivity, and rapid responsiveness. The designed sensor also shows the qualities of stability, reproducibility, reliability, and selective recognition capacity for target analytes in multiple real water samples. Moreover, computational calculations explain the function of the electrode modifier in facilitating charge transfer between the transducer and analytes.

Metal Nanoparticles and Carbon-Based Nanomaterials for Improved Performances of Electrochemical (Bio)Sensors with Biomedical Applications

Monitoring human health for early detection of disease conditions or health disorders is of major clinical importance for maintaining a healthy life. Sensors are small devices employed for qualitative and quantitative determination of various analytes by monitoring their properties using a certain transduction method. A "real-time" biosensor includes a biological recognition receptor (such as an antibody, enzyme, nucleic acid or whole cell) and a transducer to convert the biological binding event to a detectable signal, which is read out indicating both the presence and concentration of the analyte molecule. A wide range of specific analytes with biomedical significance at ultralow concentration can be sensitively detected. In nano(bio)sensors, nanoparticles (NPs) are incorporated into the (bio)sensor design by attachment to the suitably modified platforms. For this purpose, metal nanoparticles have many advantageous properties making them useful in the transducer component of the (bio)sensors. Gold, silver and platinum NPs have been the most popular ones, each form of these metallic NPs exhibiting special surface and interface features, which significantly improve the biocompatibility and transduction of the (bio)sensor compared to the same process in the absence of these NPs. This comprehensive review is focused on the main types of NPs used for electrochemical (bio)sensors design, especially screen-printed electrodes, with their specific medical application due to their improved analytical performances and miniaturized form. Other advantages such as supporting real-time decision and rapid manipulation are pointed out. A special attention is paid to carbon-based nanomaterials (especially carbon nanotubes and graphene), used by themselves or decorated with metal nanoparticles, with excellent features such as high surface area, excellent conductivity, effective catalytic properties and biocompatibility, which confer to these hybrid nanocomposites a wide biomedical applicability.

A sensitive electrochemical detection of metronidazole in synthetic serum and urine samples using low-cost screen-printed electrodes modified with reduced graphene oxide and C60

Monitoring the concentration of antibiotics in body fluids is essential to optimizing the therapy and minimizing the risk of bacteria resistance, which can be made with electrochemical sensors tailored with appropriate materials. In this paper, we report on sensors made with screen-printed electrodes (SPE) coated with fullerene (C60), reduced graphene oxide (rGO) and Nafion (NF) (C60-rGO-NF/SPE) to determine the antibiotic metronidazole (MTZ). Under optimized conditions, the C60-rGO-NF/SPE sensor exhibited a linear response in square wave voltammetry for MTZ concentrations from 2.5 × 10-7 to 34 × 10-6 mol/L, with a detection limit of 2.1 × 10-7 mol/L. This sensor was also capable of detecting MTZ in serum and urine, with recovery between 94% and 100%, which are similar to those of the standard chromatographic method (HPLC-UV). Because the C60-rGO-NF/SPE sensor is amenable to mass production and allows for MTZ determination with simple principles of detection, it fulfills the requirements of therapeutic drug monitoring programs.

The Future of Analytical and Interpretative Toxicology: Where are We Going and How Do We Get There?

(Forensic) toxicology has faced many challenges, both analytically and interpretatively, especially in relation to an increase in potential drugs of interest. Analytical toxicology and its application to medicine and forensic science have progressed rapidly within the past centuries. Technological innovations have enabled detection of more substances with increasing sensitivity in a variety of matrices. Our understanding of the effects (both intended and unintended) have also increased along with determination and degree of toxicity. However, it is clear there is even more to understand and consider. The analytical focus has been on typical matrices such as blood and urine but other matrices could further increase our understanding, especially in postmortem (PM) situations. Within this context, the role of PM changes and potential redistribution of drugs requires further research and identification of markers of its occurrence and extent. Whilst instrumentation has improved, in the future, nanotechnology may play a role in selective and sensitive analysis as well as bioassays. Toxicologists often only have an advisory impact on pre-analytical and pre-interpretative considerations. The collection of appropriate samples at the right time in an appropriate way as well as obtaining sufficient circumstance background is paramount in ensuring an effective analytical strategy to provide useful results that can be interpreted within context. Nevertheless, key interpretative considerations such as pharmacogenomics and drug-drug interactions as well as determination of tolerance remain and in the future, analytical confirmation of an individual's metabolic profile may support a personalized medicine and judicial approach. This should be supported by the compilation and appropriate application of drug data pursuant to the situation. Specifically, in PM circumstances, data pertaining to where a drug was not/may have been/was contributory will be beneficial with associated pathological considerations. This article describes the challenges faced within toxicology and discusses progress to a future where they are being addressed.

Electrochemical sensing platform for the simultaneous femtomolar detection of amlodipine and atorvastatin drugs

The development of a proficient and ultra-high sensitive functionalized electrode for accurate analysis of drugs is a long-standing challenge. Herein, we report an electrochemical nanocomposite scaffold, comprising of silver nanoparticles integrated with functionalized carbon nanotubes (COOH-CNTs/Ag/NH₂-CNTs) for the simultaneous quantification of two widely used amlodipine (AM) and atorvastatin (AT) drugs. The sandwiched nanocomposite materials were thoroughly characterized morphologically and structurally. The nanocomposite COOH-CNTs/Ag/NH₂-CNTs immobilized over glassy carbon electrode catalyzed electron transfer reactions at the electrode–electrolyte interface and facilitated detection of targeted drugs, as revealed by the significant decrease in oxidation potentials at 879 mV and 1040 mV and improved current signals. Electrochemical characterization and testing show that the functionalized porous architecture with a large effective surface area is a promising scaffold for the sensing of a binary mixture of AM and AT with limits of detection in the femtomolar range (77.6 fM, and 83.2 fM, respectively). Besides, the specificity, stability, and reliability of the electrochemical sensing platform in simple and complex biological and pharmaceutical samples with high percentage recoveries highlight its scope for practical applications. Computational studies supported the experimental outcomes and offered insights about the role of modifier in facilitating electron transfer between transducer and analytes.

Development of an ultra-sensitive electrochemical platform for the simultaneous detection of two high blood pressure drugs.

Glutamate Electropolymerization on Carbon Increases Analytical Sensitivity to Dopamine and Serotonin: An Auspicious In Vivo Phenomenon in Mice?

Carbon is the material of choice for electroanalysis of biological systems, being particularly applicable to neurotransmitter analysis as carbon fiber microelectrodes (CFMs). CFMs are most often applied to dopamine detection; however, the scope of CFM analysis has rapidly expanded over the last decade with our laboratory's focus being on improving serotonin detection at CFMs, which we achieved in the past via Nafion modification. We began this present work by seeking to optimize this modification to gain increased analytical sensitivity toward serotonin under the assumption that exposure of bare carbon to the in vivo environment rapidly deteriorates analytical performance. However, we were unable to experimentally verify this assumption and found that electrodes that had been exposed to the in vivo environment were more sensitive to evoked and ambient dopamine. We hypothesized that high in vivo concentrations of ambient extracellular glutamate could polymerize with a negative charge onto CFMs and facilitate response to dopamine. We verified this polymerization electrochemically and characterized the mechanisms of deposition with micro- and nano-imaging. Importantly, we identified that the application of 1.3 V as a positive upper waveform limit is a crucial factor for facilitating glutamate polymerization, thus improving analytical performance. Critically, information gained from these dopamine studies were extended to an in vivo environment where a 2-fold increase in sensitivity to evoked serotonin was achieved. Thus, we present here the novel finding that innate aspects of the in vivo environment are auspicious for detection of dopamine and serotonin at carbon fibers, offering a solution to our goal of an improved fast-scan cyclic voltammetry serotonin detection paradigm.

Analytical Methods for Determination of Antiviral Drugs in Different Matrices: Recent Advances and Trends

Viruses are the main pathogenic substances that cause severe diseases in humans and other living things. They are among the most common microorganisms, and consequently, antiviral drugs have emerged to prevent and treat viral infections. Antiviral drugs are an essential drug group considering their prescription and consumption rates for different diseases and indications. Therefore, it is crucial to develop accurate and precise analytical methods to detect antiviral drugs in various matrices. Chromatographic techniques are used frequently for the quantification purpose since they allow simultaneous determination of antivirals. Electrochemical methods have also gained importance since the analysis can be performed quickly without the need for pretreatment. Spectrophotometric and spectrofluorimetric methods are used because they are simple, inexpensive, and less time-consuming methods. The purpose of this review is to present an overview of the analysis of currently used antiviral drugs from 2010 to 2021. Since studies on antiviral drugs are numerous, selected publications were reviewed in this article. The analysis of antiviral drugs was divided into three main groups: chromatographic, spectrometric, and electrochemical methods which were applied to different matrices, including pharmaceutical, biological, and environmental samples.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.

Nano-sized Metal and Metal Oxide Modified Electrodes for Pharmaceuticals Analysis

:

The electrochemical analysis offers a number of important advantages such as providing information on pharmaceuticals analysis and their in vivo redox processes and pharmacological activity. The interest in developing electrochemical sensing devices for use in clinical assays is growing rapidly. Metallic nanoparticles can be synthesized and modified with various chemical functional groups, which allow them to be conjugated with antibodies, ligands, and drugs of interest.

:

In this article, the novel developments to enhance the performance of sensor modified with metal nanoparticles of pharmaceuticals were reviewed. A discussion of the properties of metal nanostructures and their application in drug analysis is presented. Their application as a modifier agent in determining low levels of drugs in pharmaceutical dosage forms and biological samples is discussed. It has been found that the electrocatalytic effect of the electrode, sensitivity and selectivity were increased using various working electrodes modified with nano-sized metal, metal oxide and metal/metal oxide particles.

Point-of-care diagnostics approaches for detection of lung cancer-associated circulating miRNAs

Circulating cell-free miRNAs (ccf-miRs) have gained significant interest as biomarkers for lung cancer (LC) diagnosis. However, the clinical application of ccf-miRs is mainly limited by time, cost, and expertise-related problems of existing detection strategies. Recently, the development of different point-of-care (POC) approaches offers useful on-site platforms, because these technologies have important features such as portability, rapid turnaround time, minimal sample requirement, and cost-effectiveness. In this review, we discuss different POC approaches for detecting ccf-miRs and highlight the utility of incorporating nanomaterials for enhanced biorecognition and signal transduction, further improving their diagnostic applicability in LC settings.

An innovative highly sensitive electrochemical sensor based on modified electrode with carbon quantum dots and multiwall carbon nanotubes for determination of methadone hydrochloride in real samples

In the present work, to enhance the properties of a pencil graphite electrode (PGE), highly functionalized carbon quantum dots (CQDs) were synthesized and mixed with multiwall carbon nanotubes (MWCNTs) as novel modifiers for the preparation of working electrodes. These modifiers exhibited unique characteristics owing to the fascinating and well-defined properties of the CQD-MWCNT nanocomposite, including high surface to volume ratio, high conductivity, high stability and excellent electrocatalytic activity. Consequently, a modified pencil graphite electrode based on poly (diallyldimethylammonium chloride) (PDDA)/MWCNT/CQD was used to monitor the oxidation signals of methadone hydrochloride. Notably, field emission scanning electron microscopy (FE-SEM) was used to characterize the morphology and features of the different modifiers on the electrode surface. The proposed sensor was characterized via electrochemical studies including differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under the optimum experimental conditions, the current response and concentration of methadone exhibited a linear relationship in the range of 0.1-225 μM with a detection limit of 0.03 μM. Furthermore, this sensor was successfully applied to determine methadone in human urine and plasma samples.

In situ photocrosslinkable formulation of nanocomposites based on multi-walled carbon nanotubes and formononetin for potential application in spinal cord injury treatment

Carbon nanotubes (CN) have been studied to treat spinal cord injuries because of its electrical properties and nanometric dimensions. This work aims to develop a photopolymerizable hydrogel containing CN functionalized with an anti-inflammatory molecule to be used in situ on spinal cord injuries. The CN functionalization step was done using the drug (formononetin). The nanocomposites were characterized by morphological analysis, FTIR, Raman Spectroscopy, thermal analysis and cytotoxicity assays (MTT and HET-CAM). The nanocomposites were incorporated into gelatin methacryloyl hydrogel and exposed to UV light for photopolymerization. The volume of the formulation and the UV exposition time were also analyzed. The CN characterization showed that formononetin acted as a functionalization agent. The functionalized CN showed safe characteristics and can be incorporated in photocrosslinkable formulation. The UV exposition time for the formulation photopolymerization was compatible with the cell viability and also occurred in the injury site.

Application of Nanostructured Carbon-Based Electrochemical (Bio)Sensors for Screening of Emerging Pharmaceutical Pollutants in Waters and Aquatic Species: A Review

Pharmaceuticals, as a contaminant of emergent concern, are being released uncontrollably into the environment potentially causing hazardous effects to aquatic ecosystems and consequently to human health. In the absence of well-established monitoring programs, one can only imagine the full extent of this problem and so there is an urgent need for the development of extremely sensitive, portable, and low-cost devices to perform analysis. Carbon-based nanomaterials are the most used nanostructures in (bio)sensors construction attributed to their facile and well-characterized production methods, commercial availability, reduced cost, high chemical stability, and low toxicity. However, most importantly, their relatively good conductivity enabling appropriate electron transfer rates-as well as their high surface area yielding attachment and extraordinary loading capacity for biomolecules-have been relevant and desirable features, justifying the key role that they have been playing, and will continue to play, in electrochemical (bio)sensor development. The present review outlines the contribution of carbon nanomaterials (carbon nanotubes, graphene, fullerene, carbon nanofibers, carbon black, carbon nanopowder, biochar nanoparticles, and graphite oxide), used alone or combined with other (nano)materials, to the field of environmental (bio)sensing, and more specifically, to pharmaceutical pollutants analysis in waters and aquatic species. The main trends of this field of research are also addressed.

Recent Electrochemical/Electrical Microfabricated Sensor Devices for Ionic and Polyionic Analytes

The recent technological advances combined with the development of new concepts and strategies have revolutionized the field of sensor devices, allowing access to increasingly sophisticated device structures associated with high sensitivities and selectivities. Among them, electrochemical and electrical sensors have gained the most interest because they offer unique intrinsic characteristics and meet the requirements to be integrated in more sophisticated devices including microfluidics or lab-on-chips, opening access to multiplex and all-in-one detection devices. In the present article, we outline and provide a short and concise overview on the most recent achievements in the field of electrical detection of ionic species as they display versatile roles in many important biological events and are ubiquitous in environment.

Synthesis, Bioapplications, and Toxicity Evaluation of Chitosan-Based Nanoparticles

The development of advanced nanomaterials and technologies is essential in biomedical engineering to improve the quality of life. Chitosan-based nanomaterials are on the forefront and attract wide interest due to their versatile physicochemical characteristics such as biodegradability, biocompatibility, and non-toxicity, which play a promising role in biological applications. Chitosan and its derivatives are employed in several applications including pharmaceuticals and biomedical engineering. This article presents a comprehensive overview of recent advances in chitosan derivatives and nanoparticle synthesis, as well as emerging applications in medicine, tissue engineering, drug delivery, gene therapy, and cancer therapy. In addition to the applications, we critically review the main concerns and mitigation strategies related to chitosan bactericidal properties, toxicity/safety using tissue cultures and animal models, and also their potential environmental impact. At the end of this review, we also provide some of future directions and conclusions that are important for expanding the field of biomedical applications of the chitosan nanoparticles.

Impact of nano-morphology, lattice defects and conductivity on the performance of graphene based electrochemical biosensors

Diverse properties of graphenic materials have been extensively explored to determine properties that make good electrochemical nanomaterial-based biosensors. These are reviewed by critically examining the influence of graphene nano-morphology, lattice defects and conductivity. Stability, reproducibility and fabrication are discussed together with sensitivity and selectivity. We provide an outlook on future directions for building efficient electrochemical biosensors.

Composites of Bimetallic Platinum-Cobalt Alloy Nanoparticles and Reduced Graphene Oxide for Electrochemical Determination of Ascorbic Acid, Dopamine, and Uric Acid

The ultimate aim of this study is to produce a composite of bimetallic platinum-cobalt nanoparticles and reduced graphene oxide (Pt-Co@rGO) based biosensor for the detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Those are biologically important molecules with the key functions for the human body. Pt-Co@rGO was synthesized using a microwave-assisted technique and utilized for the production of a highly sensitive and stable electrochemical biosensor. Detailed spectral XPS and Raman analysis, XRD, and TEM/HR-TEM characterization were also studied. Due to the superior activity and excellent conductivity of rGO, well-separated oxidation peaks of these biomolecules is proven by DPV (differential pulse voltammetry) and CV (cyclic voltammetry) measurements. The prepared Pt-Co@rGO-based biosensor showed high electrochemical activity, a broad linear response, high sensitivity, and acceptable limit of detection values for individual and simultaneous determination of AA, DA, and UA, under optimized conditions. The linear range of Pt-Co@rGO was found to be 170-200; 35-1500 and 5-800 µM for AA, DA, and UA, respectively. Moreover, the detection limit of the prepared composite was calculated as 0.345; 0.051; 0.172 µM for AA, DA, and UA, respectively. In the field of electrochemical biosensors, Pt-Co@rGO based sensor is highly promising due to its superior sensitivity and good selectivity properties.

Carbon Paste Modified Electrode as Powerful Sensor Approach Determination of Food Contaminants, Drug Ingredients, and Environmental Pollutants: A Review

Background:

Application of electrochemical sensors for analysis of food, biological and water polluting compounds helps to speed up their analysis in the real samples. Electrochemical sensors with low cost, fast response and portable ability are a better choice compared to traditional methods for analysis of electro-active compounds such as HPLC. Therefore, in recent years, many analytical scientists have suggested this type of analytical method for analysis of food, biological compounds and water pollutants.

Objective:

Due to low cost, easy modification and low non-faradic current, the carbon paste electrode is a suitable choice as a working electrode in the electrochemical and especially voltammetric analysis. On the other hand, modification of carbon paste electrode can improve the quality of the sensor for the analysis of electroactive compounds at nanomolar level.

Voltammetric Evaluation of Diclofenac Tablets Samples through Carbon Black-Based Electrodes

Diclofenac (DIC) is a non-steroidal anti-inflammatory drug of wide use around the world. Electroanalytical methods display a high analytical potential for application in pharmaceutical samples but the drawbacks concerning electrode fouling and reproducibility are of major concern. Henceforth, the aim of this work was to propose the use of alternative low-cost carbon black (CB) and ionic liquid (IL) matrix to modify the surface of pencil graphite electrodes (PGE) in order to quantify DIC in raw materials, intermediates, and final products, as well as in stability assays of tablets. The proposed method using CB+IL/PGE displayed good recovery (99.4%) as well as limits of detection (LOD) of 0.08 µmol L-1 and limits of quantification (LOQ) of 0.28 µmol L-1. CB+IL/PGE response was five times greater than the unmodified PGE. CB+IL-PGE stands as an interesting alternative for DIC assessment in different pharmaceutical samples.

Simultaneous voltammetric sensing of levodopa, piroxicam, ofloxacin and methocarbamol using a carbon paste electrode modified with graphite oxide and β-cyclodextrin

A carbon paste electrode (CPE) was modified with graphite oxide (GrO) and β-cyclodextrin (CD) to obtain a sensor for simultaneous voltammetric determination of levodopa (LD), piroxicam (PRX), ofloxacin (OFX) and methocarbamol (MCB). The morphology, structure and electrochemical properties of the functionalized GrO were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, contact angle measurements and cyclic voltammetry. Under the optimal experimental conditions, the sensor is capable of detecting LD, PRX, OFX and MCB by square wave voltammetry (SWV) at working potentials of +0.40, +0.60, +1.03 and + 1.27 V (versus Ag/AgCl), respectively. Response is linear from 1.0 to 20 μM for LD, from 1.0 to 15 μM for PRX, from 1.0 to 20 μM for OFX, and from 1.0 to 50 μM for MCB. The respective limits of detection are 65, 105, 89 and 400 nM. The method was successfully applied to the simultaneous determination of LD, PRX, OFX and MCB in (spiked) real river water and synthetic urine samples, and the results were in agreement with those obtained using a spectrophotometric method, with recoveries close to 100%. Graphical abstract Schematic presentation of a novel electroanalytical method employing a carbon paste electrode modified with graphite oxide and β-cyclodextrin for the simultaneous determination of levodopa, piroxicam, ofloxacin and methocarbamol in urine and river water samples by square wave voltammetry.

A novel electrochemical nanosensor based on NH2-functionalized multi walled carbon nanotubes for the determination of catechol-orto-methyltransferase inhibitor entacapone

In this study, an antiparkinson drug Entacapone (ENP) is electrochemically investigated under optimized conditions using NH₂ functionalized multi walled carbon nanotubes (NH₂fMWCNT) decorated over glassy carbon electrode (GCE). The surface morphology of the NH₂fMWCNT/GCE was probed by scanning electron microscopy (SEM) armed with EDX analysis. Electrochemical impedance spectroscopy (EIS) was employed to investigate the electron transfer capability of modified and bare electrodes. Cyclic voltammetry was used to compare the redox response of ENP on the surface of modified and unmodified electrodes. The influence of interfering agents was also studied to examine the selectivity of the designed sensor. For the purpose of practical applicability of the proposed method, differential pulse voltammetric method was applied for the investigation of ENP in real samples i.e., tablet, human serum and urine. Almost 100% recovery percentages were obtained from tablet, serum and urine samples with RSD% values of less than 2% for all the samples, thus, suggesting promising applicability of the designed electrochemical sensing platform (NH₂fMWCNT/GCE) for determination of ENP in pharmaceutical dosage and real samples.