Antimicrobial activity, membrane interaction and stability of the D-amino acid substituted analogs of antimicrobial peptide W3R6

Enhancing the stability and therapeutic potential of the antimicrobial peptide Feleucin-K3 against Multidrug-Resistant a. Baumannii through rational utilization of a D-amino acid substitution strategy

Antimicrobial peptides (AMPs), which have a low probability of developing resistance, are considered the most promising antimicrobial agents for combating antibiotic resistance. Feleucin-K3 is an amphiphilic cationic AMP that exhibits broad-spectrum antimicrobial activity. In our previous research, the first phenylalanine residue was identified as the critical position affecting its biological activity. Here, a series of Feleucin-K3 analogs containing hydrophobic D-amino acids were developed, leveraging the low sensitivity of proteases to unnatural amino acids and the regulatory effect of hydrophobicity on antimicrobial activity. Among them, K-1dF, which replaced the phenylalanine of Feleucin-K3 with its enantiomer (D-phenylalanine), exhibited potent antimicrobial activity with a therapeutic index of 46.97 and MICs between 4 to 8 μg/ml against both sensitive and multidrug-resistant Acinetobacter baumannii. The introduction of D-phenylalanine increased the salt tolerance and serum stability of Feleucin-K3. Moreover, K-1dF displayed a rapid bactericidal effect, a low propensity to develop resistance, and a synergistic effect when combined with antibiotics. More importantly, it exhibited considerable or superior efficacy to imipenem against pneumonia and skin abscess infection. In brief, the K-1dF obtained by simple and effective modification strategy has emerged as a promising candidate antimicrobial agent for tackling multidrug-resistant Acinetobacter baumannii infections.

Non-canonical amino acid bioincorporation into antimicrobial peptides and its challenges

The rise of antimicrobial resistance and multi-drug resistant pathogens has necessitated explorations for novel antibiotic agents as the discovery of conventional antibiotics is becoming economically less viable and technically more challenging for biopharma. Antimicrobial peptides (AMPs) have emerged as a promising alternative because of their particular mode of action, broad spectrum and difficulty that microbes have in becoming resistant to them. The AMPs bacitracin, gramicidin, polymyxins and daptomycin are currently used clinically. However, their susceptibility to proteolytic degradation, toxicity profile, and complexities in large-scale manufacture have hindered their development. To improve their proteolytic stability, methods such as integrating non-canonical amino acids (ncAAs) into their peptide sequence have been adopted, which also improves their potency and spectrum of action. The benefits of ncAA incorporation have been made possible by solid-phase peptide synthesis. However, this method is not always suitable for commercial production of AMPs because of poor yield, scale-up difficulties, and its non-'green' nature. Bioincorporation of ncAA as a method of integration is an emerging field geared towards tackling the challenges of solid-phase synthesis as a green, cheaper, and scalable alternative for commercialisation of AMPs. This review focusses on the bioincorporation of ncAAs; some challenges associated with the methods are outlined, and notes are given on how to overcome these challenges. The review focusses particularly on addressing two key challenges: AMP cytotoxicity towards microbial cell factories and the uptake of ncAAs that are unfavourable to them. Overcoming these challenges will draw us closer to a greater yield and an environmentally friendly and sustainable approach to make AMPs more druggable.

Development strategies and application of antimicrobial peptides as future alternatives to in-feed antibiotics

The use of in-feed antibiotics has been widely restricted due to the significant environmental pollution and food safety concerns they have caused. Antimicrobial peptides (AMPs) have attracted widespread attention as potential future alternatives to in-feed antibiotics owing to their demonstrated antimicrobial activity and environment friendly characteristics. However, the challenges of weak bioactivity, immature stability, and low production yields of natural AMPs impede practical application in the feed industry. To address these problems, efforts have been made to develop strategies for approaching the AMPs with enhanced properties. Herein, we summarize approaches to improving the properties of AMPs as potential alternatives to in-feed antibiotics, mainly including optimization of structural parameters, sequence modification, selection of microbial hosts, fusion expression, and industrially fermentation control. Additionally, the potential for application of AMPs in animal husbandry is discussed. This comprehensive review lays a strong theoretical foundation for the development of in-feed AMPs to achieve the public health globally.

Mechanism of Protease Resistance of D-Amino Acid Residue Containing Cationic Antimicrobial Heptapeptides

Antimicrobial peptides (AMPs) have been an alternate promising class of therapeutics in combating global antibiotic resistance threat. However, the short half-life of AMPs, owing to protease degradability, is one of the major bottlenecks in its commercial success. In this study, we have developed all-D-amino acid containing small cationic peptides P4C and P5C, which are completely protease-resistant, noncytotoxic, nonhemolytic, and potent against the ESKAPE pathogens in comparison to their L analogues. MD simulations suggested marginal improvement in the peptide-binding affinity to the membrane-mimetic SDS micelle (∼ 1 kcal/mol) in response to L → D conversion, corroborating the marginal improvement in the antimicrobial activity. However, L → D chirality conversion severely compromised the peptide:protease (trypsin) binding affinity (≥10 kcal/mol). The relative distance between the scissile peptide carbonyl and the catalytic triad of the protease (H57, D102, and S195) was found to be significantly altered in the D-peptide:protease complex (inactive conformation) relative to the active L-peptide:protease complex. Thus, the poor binding affinity between D-peptides and the protease, resulting in the inactive complex formation, explained their experimentally observed proteolytic stability. This mechanistic insight might be extended to the proteolytic stability of the D-peptides in general and stimulate the rational design of protease-resistant AMPs.

A cleavable chimeric peptide with targeting and killing domains enhances LPS neutralization and antibacterial properties against multi-drug resistant E. coli

Pathogenic Escherichia coli is one of the most common causes of diarrhea diseases and its characteristic component of the outer membrane-lipopolysaccharide (LPS) is a major inducer of sepsis. Few drugs have been proven to kill bacteria and simultaneously neutralize LPS toxicity. Here, the chimeric peptides-R7, A7 and G7 were generated by connecting LBP14 (LPS-targeting domain) with L7 (killing domain) via different linkers to improve antibacterial and anti-inflammatory activities. Compared to parent LBP14-RKRR and L7, the antibacterial activity of R7 with a cleavable "RKRR" linker and the "LBP14-RKRR + L7" cocktail against Escherichia coli, Salmonella typhimurium and Staphylococcus aureus was increased by 2 ~ 4-fold. Both A7 and G7 with non-cleavable linkers almost lost antibacterial activity. The ability of R7 to neutralize LPS was markedly higher than that of LBP14-RKRR and L7. In vivo, R7 could be cleaved by furin in a time-dependent manner, and release L7 and LBP14-RKRR in serum. In vivo, R7 can enhance mouse survival more effectively than L7 and alleviate lung injuries by selective inhibition of the NF-κB signaling pathways and promoting higher IAP activity. It suggests that R7 may be promising dual-function candidates as antibacterial and anti-endotoxin agents.

Gene expression and molecular characterization of recombinant subtilisin from Bacillus subtilis with antibacterial, antioxidant and anticancer properties

This study investigated the multifunctional attributes such as, antibacterial, antioxidant and anticancer potential of recombinant subtilisin. A codon-optimized subtilisin gene was synthesized from Bacillus subtilis and was successfully transformed into E. coli DH5α cells which was further induced for high level expression in E. coli BL21 (DE3). An affinity purified ~40 kDa recombinant subtilisin was obtained that revealed to be highly alkali-thermostable based on the thermodynamic parameters. The kinetic parameters were deduced that indicated higher affinity of N-Suc-F-A-A-F-pNA substrate towards subtilisin. Recombinant subtilisin demonstrated strong antibacterial activity against several pathogens and showed minimum inhibitory concentration of 0.06 μg/mL against B. licheniformis and also revealed high stability under the influence of several biochemical factors. It also displayed antioxidant potential in a dose dependent manner and exhibited cell cytotoxicity against A549 and MCF-7 cancerous cell lines with IC50 of 5 μM and 12 μM respectively. The identity of recombinant subtilisin was established by MALDI-TOF mass spectrum depicting desired mass peaks and N-terminal sequence as MRSK by MALDI-TOF-MS. The deduced N- terminal amino acid sequence by Edman degradation revealed high sequence similarity with subtilisins from Bacillus strains. The structural and functional analysis of recombinant antibacterial subtilisin was elucidated by Raman, circular dichroism and nuclear magnetic resonance spectroscopy and thermogravimetric analysis. The results contribute to the development of highly efficient subtilisin with enhanced catalytic properties making it a promising candidate for therapeutic applications in healthcare industries.

Structure-Activity Relationships of Low Molecular Weight Alginate Oligosaccharide Therapy against Pseudomonas aeruginosa

Low molecular weight alginate oligosaccharides have been shown to exhibit anti-microbial activity against a range of multi-drug resistant bacteria, including Pseudomonas aeruginosa. Previous studies suggested that the disruption of calcium (Ca2+)-DNA binding within bacterial biofilms and dysregulation of quorum sensing (QS) were key factors in these observed effects. To further investigate the contribution of Ca2+ binding, G-block (OligoG) and M-block alginate oligosaccharides (OligoM) with comparable average size DPn 19 but contrasting Ca2+ binding properties were prepared. Fourier-transform infrared spectroscopy demonstrated prolonged binding of alginate oligosaccharides to the pseudomonal cell membrane even after hydrodynamic shear treatment. Molecular dynamics simulations and isothermal titration calorimetry revealed that OligoG exhibited stronger interactions with bacterial LPS than OligoM, although this difference was not mirrored by differential reductions in bacterial growth. While confocal laser scanning microscopy showed that both agents demonstrated similar dose-dependent reductions in biofilm formation, OligoG exhibited a stronger QS inhibitory effect and increased potentiation of the antibiotic azithromycin in minimum inhibitory concentration and biofilm assays. This study demonstrates that the anti-microbial effects of alginate oligosaccharides are not purely influenced by Ca2+-dependent processes but also by electrostatic interactions that are common to both G-block and M-block structures.

Going Beyond Host Defence Peptides: Horizons of Chemically Engineered Peptides for Multidrug-Resistant Bacteria

Multidrug-resistant (MDR) bacteria are considered a health threat worldwide, and this problem is set to increase over the decades. The ESKAPE, a group of six pathogens including Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter spp. is the major source of concern due to their high death incidence and nosocomial acquired infection. Host defence peptides (HDPs) are a class of ribosomally synthesised peptides that have shown promising results in combating MDR, including the ESKAPE group, in- and outside bacterial biofilms. However, their poor pharmacokinetics in physiological mediums may impede HDPs from becoming viable clinical candidates. To circumvent this problem, chemical engineering of HDPs has been seen as an emergent approach to not only improve their pharmacokinetics but also their efficacy against pathogens. In this review, we explore several chemical modifications of HDPs that have shown promising results, especially against ESKAPE pathogens, and provide an overview of the current findings with respect to each modification.

Synergistic Effect, Improved Cell Selectivity, and Elucidating the Action Mechanism of Antimicrobial Peptide YS12

Antimicrobial peptides (AMPs) have attracted considerable attention as potential substitutes for traditional antibiotics. In our previous research, a novel antimicrobial peptide YS12 derived from the Bacillus velezensis strain showed broad-spectrum antimicrobial activity against Gram-positive and Gram-negative bacteria. In this study, the fractional inhibitory concentration index (FICI) indicated that combining YS12 with commercial antibiotics produced a synergistic effect. Following these findings, the combination of YS12 with an antibiotic resulted in a faster killing effect against bacterial strains compared to the treatment with the peptide YS12 or antibiotic alone. The peptide YS12 maintained its antimicrobial activity under different physiological salts (Na+, Mg2+, and Fe3+). Most importantly, YS12 exhibited no cytotoxicity towards Raw 264.7 cells and showed low hemolytic activity, whereas positive control melittin indicated extremely high toxicity. In terms of mode of action, we found that peptide YS12 was able to bind with LPS through electrostatic interaction. The results from fluorescent measurement revealed that peptide YS12 damaged the integrity of the bacterial membrane. Confocal laser microscopy further confirmed that the localization of peptide YS12 was almost in the cytoplasm of the cells. Peptide YS12 also exhibited anti-inflammatory activity by reducing the release of LPS-induced pro-inflammatory mediators such as TNF-α, IL-1β, and NO. Collectively, these properties strongly suggest that the antimicrobial peptide YS12 may be a promising candidate for treating microbial infections and inflammation.

Recent advances in the development of therapeutic peptides

Peptides have unique characteristics that make them highly desirable as therapeutic agents. The physicochemical and proteolytic stability profiles determine the therapeutic potential of peptides. Multiple strategies to enhance the therapeutic profile of peptides have emerged. They include chemical modifications, such as cyclization, substitution with d-amino acids, peptoid formation, N-methylation, and side-chain halogenation, and incorporation in delivery systems. There have been recent advances in approaches to discover peptides having these modifications to attain desirable therapeutic properties. We critically review these recent advancements in therapeutic peptide development.

Membrane-active and DNA binding related double-action antimycobacterial mechanism of antimicrobial peptide W3R6 and its synthetic analogs

The emergence of multidrug- or extremely drug-resistant M. tuberculosis strains has made very few drugs available for current tuberculosis treatment. Antimicrobial peptides can be employed as a promising alternative strategy for TB treatment. Here, we designed and synthesized a series of peptide sequences based on the structure-activity relationships of natural sequences of antimicrobial peptides. The peptide W3R6 and its analogs were screened and found to have potent antimycobacterial activity against M. smegmatis, and no hemolytic activity against human erythrocytes. The evidence from the mechanism of action study indicated that W3R6 and its analogs can interact with the mycobacterial membrane in a lytic manner and form pores on the outer membrane of M. smegmatis. Significant colocalization of D-W3R6 with mycobacterial DNA was observed by confocal laser scanning microscopy and DNA retardation assays, which suggested that the antimycobacterial mechanism of action of the peptide was associated with the unprotected genomic DNA of M. smegmatis. In general, W3R6 and its analogs act on not only the mycobacterial membrane but also the genomic DNA in the cytoplasm, which makes it difficult for mycobacteria to generate resistance due to the peptides having two targets. In addition, the peptides can effectively eliminate M. smegmatis cells from infected macrophages. Our findings indicated that the antimicrobial peptide W3R6 could be a novel lead compound to overcome the threat from drug-resistant M. tuberculosis strains in the development of potent AMPs for TB therapeutic applications.

Boosting stability and therapeutic potential of proteolysis-resistant antimicrobial peptides by end-tagging β-naphthylalanine

Recently, much emphasis has been placed on solving the intrinsic defects of antimicrobial peptides (AMPs), especially their susceptibility to protease digestion for the systemic application of antibacterial biomaterials. Although many strategies have increased the protease stability of AMPs, antimicrobial activity was severely compromised, thereby substantially weakening their therapeutic effect. To address this issue, we introduced hydrophobic group modifications at the N-terminus of proteolysis-resistant AMPs D1 (AArIIlrWrFR) through end-tagging with stretches of natural amino acids (W and I), unnatural amino acid (Nal) and fatty acids. Of these peptides, N1 tagged with a Nal at N-terminus showed the highest selectivity index (GM_SI = 19.59), with a 6.73-fold improvement over D1. In addition to potent broad-spectrum antimicrobial activity, N1 also exhibited high antimicrobial stability toward salts, serum and proteases in vitro and ideal biocompatibility and therapeutic efficacy in vivo. Furthermore, N1 killed bacteria through multiple mechanisms, involving disruption of bacterial membranes and inhibition of bacterial energy metabolism. Indeed, appropriate terminal hydrophobicity modification opens up new avenues for developing and applying high-stability peptide-based antibacterial biomaterials. STATEMENT OF SIGNIFICANCE: To improve the potency and stability of proteolysis-resistant antimicrobial peptides (AMPs) without increasing toxicity, we constructed a convenient and tunable platform based on different compositions and lengths of hydrophobic end modifications. By tagging an Nal at the N-terminal, the obtained target compound N1 exhibited strong antimicrobial activity and desirable stability under multifarious environments in vitro (protease, salts and serum), and also showed favorable biocompatibility and therapeutic efficacy in vivo. Notably, N1exerted its bactericidal effect by damaging bacterial cell membranes and inhibiting bacterial energy metabolism in a dual mode. The findings provide a potential method for designing or optimizing proteolysis-resistant AMPs thus promoting the development and application of peptide-based antibacterial biomaterial.

Unnatural amino acids: promising implications for the development of new antimicrobial peptides

The increasing incidence and rapid spread of bacterial resistance to conventional antibiotics are a serious global threat to public health, highlighting the need to develop new antimicrobial alternatives. Antimicrobial peptides (AMPs) represent a class of promising natural antibiotic candidates due to their broad-spectrum activity and low tendency to induce resistance. However, the development of AMPs for medical use is hampered by several obstacles, such as moderate activity, lability to proteolytic degradation, and low bioavailability. To date, many researchers have focussed on the optimization or design of novel artificial AMPs with desired properties. Unnatural amino acids (UAAs) are valuable building blocks in the manufacture of a variety of pharmaceuticals, and have been used to develop artificial AMPs with specific structural and physicochemical properties. Rational incorporation of UAAs has become a very promising approach to endow AMPs with strong and long-lasting activity but no toxicity. This review aims to summarize key approaches that have been used to incorporate UAAs to develop novel AMPs with improved properties and better performance. It is anticipated that this review will guide future design considerations for UAA-based antimicrobial applications.

Incorporation of Non-Canonical Amino Acids into Antimicrobial Peptides: Advances, Challenges, and Perspectives

The emergence of antimicrobial resistance is a global health concern and calls for the development of novel antibiotic agents. Antimicrobial peptides seem to be promising candidates due to their diverse sources, mechanisms of action, and physicochemical characteristics, as well as the relatively low emergence of resistance. The incorporation of noncanonical amino acids into antimicrobial peptides could effectively improve their physicochemical and pharmacological diversity. Recently, various antimicrobial peptides variants with improved or novel properties have been produced by the incorporation of single and multiple distinct noncanonical amino acids. In this review, we summarize strategies for the incorporation of noncanonical amino acids into antimicrobial peptides, as well as their features and suitabilities. Recent applications of noncanonical amino acid incorporation into antimicrobial peptides are also presented. Finally, we discuss the related challenges and prospects.

D1018 with higher stability and excellent lipopolysaccharide binding affinity has potent anti-bacterial and anti-inflammatory activity

Escherichia coli (E. coli) infection and LPS-induced inflammation are still of severe threat to human health. With the increasing problem of antibiotic resistance, there is a desperate need to develop new approaches to solve the problem. Antimicrobial peptide (AMP) IDR-1018 exhibited potential antimicrobial and immunoregulation activity. However, moderate antimicrobial efficiency and susceptibility to protease cleavage limited its therapeutic application. Therefore, the derived 1018M which has better activity against MRSA and whole sequence D-amino acids substitution peptides (D1018 and D1018M) were synthesized in this study. The resistance of D1018 and D1018M against tested proteases increased (2–4 times), particularly in D1018. The antibacterial activity of D1018 was the same as that of the parent peptide IDR-1018, but the antimicrobial activity of D1018M was slightly increased (2-fold). Though the hemolysis of IDR-1018 and D1018 was about 2%, at the concentration of 8×MIC, the cytotoxicity of IDR-1018, D1018, and 1018M was negligible. The peptides could interact with E. coli cell wall and cytoplasmic membrane, penetrate the membrane, cause leakage of contents, and disrupt genomic DNA. Among them, D1018 is the most prominent one. In addition, IDR-1018 and D1018 showed potent binding ability to LPS, thus leading to excellent inhibition capacity to LPS-induced proinflammation response. Taken together, these data demonstrate that D1018 is a promising peptide candidate for the treatment of E. coli infection.

Efficacy of natural antimicrobial peptides versus peptidomimetic analogues: a systematic review

Aims: This systematic review was carried out to determine whether synthetic peptidomimetics exhibit significant advantages over antimicrobial peptides in terms of in vitro potency. Structural features - molecular weight, charge and length - were examined for correlations with activity. Methods: Original research articles reporting minimum inhibitory concentration  values against Escherichia coli, indexed until 31 December 2020, were searched in PubMed/ScienceDirect/Google Scholar and evaluated using mixed-effects models. Results: In vitro antimicrobial activity of peptidomimetics resembled that of antimicrobial peptides. Net charge significantly affected minimum inhibitory concentration values (p < 0.001) with a trend of 4.6% decrease for increments in charge by +1. Conclusion: AMPs and antibacterial peptidomimetics exhibit similar potencies, providing an opportunity to exploit the advantageous stability and bioavailability typically associated with peptidomimetics.

Antibacterial peptide fractions from chia seeds (Salvia hispanica L.) and their stability to food processing conditions

Foodborne pathogens are one of the major causes of food deterioration and a public health concern worldwide. Antimicrobial peptides (AMPs) encrypted in protein sequences from plants, such as chia (Salvia hispanica), might have a crucial role in the inhibition of bacteria. In this study, the antibacterial activity and stability of chia peptide fractions (CPFs) were evaluated for potential applications in food preservation. Three CPFs (F < 1, F 1-3, and F 3-5 kDa) were obtained by enzymatic hydrolysis of a protein-rich fraction and subsequent ultrafiltration. Gram-positive bacteria were susceptible to F < 1. This fraction's more significant inhibition effect was reported against Listeria monocytogenes (635.4 ± 3.6 µg/mL). F < 1 remained active after incubation at 4-80 °C and a pH range of 5-8 but was inactive after exposure to pepsin and trypsin. In this sense, F < 1 could be suitable for meat and dairy products at a maximum reference level of 12-25 mg/kg. Multicriteria analysis suggested that KLKKNL could be the peptide displaying the antimicrobial activity in F < 1. These results demonstrate the potential of this sequence as a preservative for controlling the proliferation of Gram-positive bacteria in food products.

Engineering Approaches for the Development of Antimicrobial Peptide-Based Antibiotics

Antimicrobial peptides (AMPs) have received increasing attention as potential alternatives for future antibiotics because of the rise of multidrug-resistant (MDR) bacteria. AMPs are small cationic peptides with broad-spectrum antibiotic activities and different action mechanisms to those of traditional antibiotics. Despite the desirable advantages of developing peptide-based antimicrobial agents, the clinical applications of AMPs are still limited because of their enzymatic degradation, toxicity, and selectivity. In this review, structural modifications, such as amino acid substitution, stapling, cyclization of peptides, and hybrid AMPs with conventional antibiotics or other peptides, will be presented. Additionally, nanodelivery systems using metals or lipids to deliver AMPs will be discussed based on the structural properties and action mechanisms of AMPs.

Novel D-form of hybrid peptide (D-AP19) rapidly kills Acinetobacter baumannii while tolerating proteolytic enzymes

Antimicrobial peptides (AMPs) are being developed as potent alternative treatments to conventional antibiotics which are unlikely to induce bacterial resistance. They can be designed and modified to possess several druggable properties. We report herein a novel hybrid peptide of modified aurein (A3) and cathelicidin (P7), or A3P7, by a flipping technique. It exhibited potent antibacterial activity against both Gram-negative and -positive pathogenic bacteria but had moderate hemolytic activity. To reduce the sequence length and toxicity, C-terminal truncation was serially performed and eight truncated derivatives (AP12-AP19) were obtained. They had significantly less hemolytic activity while preserving antibacterial activity. Secondary structures of the candidate peptides in environments simulating bacterial membranes (30 mM SDS and 50% TFE), determined by CD spectroscopy, showed α-helical structures consistent with predicted in silico 3D structural models. Among the peptides, AP19 demonstrated the best combination of broad-spectrum antibacterial activity (including toward Acinetobacter baumannii) and minimal hemolytic and cytotoxic activities. A D-form peptide (D-AP19), in which all L-enantiomers were substituted with the D-enantiomers, maintained antibacterial activity in the presence of pepsin, trypsin, proteinase K and human plasma. Both isomers exhibited potent antibacterial activity against multi-drug (MDR) and extensively-drug resistant (XDR) clinical isolates of A. baumannii comparable to the traditional antibiotic, meropenem. D-AP19 displayed rapid killing via membrane disruption and leakage of intracellular contents. Additionally, it showed a low tendency to induce bacterial resistance. Our work suggested that D-AP19 could be further optimized and developed as a novel compound potentially for fighting against MDR or XDR A. baumannii.

Lights and Shadows on the Therapeutic Use of Antimicrobial Peptides

The emergence of antimicrobial-resistant infections is still a major concern for public health worldwide. The number of pathogenic microorganisms capable of resisting common therapeutic treatments are constantly increasing, highlighting the need of innovative and more effective drugs. This phenomenon is strictly connected to the rapid metabolism of microorganisms: due to the huge number of mutations that can occur in a relatively short time, a colony can “adapt” to the pharmacological treatment with the evolution of new resistant species. However, the shortage of available antimicrobial drugs in clinical use is also caused by the high costs involved in developing and marketing new drugs without an adequate guarantee of an economic return; therefore, the pharmaceutical companies have reduced their investments in this area. The use of antimicrobial peptides (AMPs) represents a promising strategy for the design of new therapeutic agents. AMPs act as immune defense mediators of the host organism and show a poor ability to induce antimicrobial resistance, coupled with other advantages such as a broad spectrum of activity, not excessive synthetic costs and low toxicity of both the peptide itself and its own metabolites. It is also important to underline that many antimicrobial peptides, due to their inclination to attack cell membranes, have additional biological activities, such as, for example, as anti-cancer drugs. Unfortunately, they usually undergo rapid degradation by proteolytic enzymes and are characterized by poor bioavailability, preventing their extensive clinical use and landing on the pharmaceutical market. This review is focused on the strength and weak points of antimicrobial peptides as therapeutic agents. We give an overview on the AMPs already employed in clinical practice, which are examples of successful strategies aimed at overcoming the main drawbacks of peptide-based drugs. The review deepens the most promising strategies to design modified antimicrobial peptides with higher proteolytic stability with the purpose of giving a comprehensive summary of the commonly employed approaches to evaluate and optimize the peptide potentialities.

Bacteriocins from lactic acid bacteria: purification strategies and applications in food and medical industries: a review

Background

Bacteriocins are generally defined as ribosomally synthesized peptides, which are produced by lactic acid bacteria (LAB) that affect the growth of related or unrelated microorganisms. Conventionally, the extracted bacteriocins are purified by precipitation, where ammonium sulphate is added to precipitate out the protein from the solution.

Main text

To achieve the high purity of bacteriocins, a combination with chromatography is used where the hydrophobicity and cationic properties of bacteriocins are employed. The complexity column inside the chromatography can afford to resolve the loss of bacteriocins during the ammonium sulphate precipitation. Recently, an aqueous two-phase system (ATPS) has been widely used in bacteriocins purification due to the several advantages of its operational simplicity, mild process conditions and versatility. It reduces the operation steps and processing time yet provides high recovery products which provide alternative ways to conventional methods in downstream processing. Bacteriocins are widely approached in the food and medical industry. In food application, nisin, which is produced by Lactococcus lactis subsp. has been introduced as food preservative due to its natural, toxicology safe and effective against the gram-positive bacteria. Besides, bacteriocins provide a board range in medical industries where they are used as antibiotics and probiotics.

Short conclusion

In summary, this review focuses on the downstream separation of bacteriocins from various sources using both conventional and recent ATPS techniques. Finally, recommendations for future interesting areas of research that need to be pursued are highlighted.

Multifunctional filter membrane for face mask using bacterial cellulose for highly efficient particulate matter removal

ABSTRACT

Particulate matter (PM) pollution and SARS-CoV-2 (COVID-19) have brought severe threats to public health. High level of PM serves as a carrier of COVID-19 which is a global pandemic. This study fabricated filter membrane for face mask using bacterial cellulose and fingerroot extract (BC-FT) via immersion technique. The surface area, pore volume and pore size of BC were analyzed by Brunauer-Emmett-Teller. The physiochemical properties of the membrane were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffractometer. The crystallinity decreased from 63.7% in pure BC to 52.4% in BC-FT filter membrane. Young's modulus increased from 1277.02 MPa in pure BC to 2251.17 MPa in BC-FT filter membrane. The filter membrane showed excellent PM 0.1 removal efficiency of 99.83% and antimicrobial activity against Staphylococcus aureus and Escherichia coli. The fabricated membrane is excellent to prevent inhalation of PM2.5 and COVID-19 respiratory droplet.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-022-04641-3.

An Antibacterial Peptide with High Resistance to Trypsin Obtained by Substituting d-Amino Acids for Trypsin Cleavage Sites

The poor stability of antibacterial peptide to protease limits its clinical application. Among these limitations, trypsin mainly exists in digestive tract, which is an insurmountable obstacle to orally delivered peptides. OM19R is a random curly polyproline cationic antimicrobial peptide, which has high antibacterial activity against some gram-negative bacteria, but its stability against pancreatin is poor. According to the structure-activity relationship of OM19R, all cationic amino acid residues (l-arginine and l-lysine) at the trypsin cleavage sites were replaced with corresponding d-amino acid residues to obtain the designed peptide OM19D, which not only maintained its antibacterial activity but also enhanced the stability of trypsin. Proceeding high concentrations of trypsin and long-time (such as 10 mg/mL, 8 h) treatment, it still had high antibacterial activity (MIC = 16–32 µg/mL). In addition, OM19D also showed high stability to serum, plasma and other environmental factors. It is similar to its parent peptide in secondary structure and mechanism of action. Therefore, this strategy is beneficial to improve the protease stability of antibacterial peptides.

The effects of incorporation of the counterparts and mimics of L-lysine on the antimicrobial activity, hemolytic activity, cytotoxicity and tryptic stability of antimicrobial peptide polybia-MPII

Due to the limited effects of conventional antibiotics on the increasing emergence of drug-resistant bacteria and fungi, novel antimicrobial agents were urgently needed to alleviate this phenomenon. Nowadays, antimicrobial peptides are believed to be a promising candidate for a new generation of antimicrobial drugs. Antimicrobial peptide polybia-MPII (MPII) was first isolated from the venom of the social wasp Polybia paulista with a broad spectrum of antimicrobial activity. In the present study, the counterparts and mimics of cationic amino acids of Lys, such as Arg, His, Orn, Dab and Dap were employed to substitute Lys in the sequence of MPII. The effects of the incorporation of these amino acids on its antimicrobial activity, hemolytic activity, cytotoxicity, enzyme stability and therapeutic potential were explored. Our results showed that although the incorporation of Arg could improve its antimicrobial activity, there is no improvement in enzyme stability. The incorporation of His makes MPII exert its antimicrobial activity in a pH-dependent manner. Notably, incorporating Dap could effectively decrease its hemolytic activity and cytotoxicity and enhance its enzyme stability against trypsin. In conclusion, this study would provide an effective strategy to improve the bioavailability and metabolic stability of AMPs while decrease their hemolytic activity and cytotoxicity.

Antimicrobial peptides: mechanism of action, activity and clinical potential

The management of bacterial infections is becoming a major clinical challenge due to the rapid evolution of antibiotic resistant bacteria. As an excellent candidate to overcome antibiotic resistance, antimicrobial peptides (AMPs) that are produced from the synthetic and natural sources demonstrate a broad-spectrum antimicrobial activity with the high specificity and low toxicity. These peptides possess distinctive structures and functions by employing sophisticated mechanisms of action. This comprehensive review provides a broad overview of AMPs from the origin, structural characteristics, mechanisms of action, biological activities to clinical applications. We finally discuss the strategies to optimize and develop AMP-based treatment as the potential antimicrobial and anticancer therapeutics.

HemoNet: Predicting hemolytic activity of peptides with integrated feature learning

Quantifying the hemolytic activity of peptides is a crucial step in the discovery of novel therapeutic peptides. Computational methods are attractive in this domain due to their ability to guide wet-lab experimental discovery or screening of peptides based on their hemolytic activity. However, existing methods are unable to accurately model various important aspects of this predictive problem such as the role of N/C-terminal modifications, D- and L- amino acids, etc. In this work, we have developed a novel neural network-based approach called HemoNet for predicting the hemolytic activity of peptides. The proposed method captures the contextual importance of different amino acids in a given peptide sequence using a specialized feature embedding in conjunction with SMILES-based fingerprint representation of N/C-terminal modifications. We have analyzed the predictive performance of the proposed method using stratified cross-validation in comparison with previous methods, non-redundant cross-validation as well as validation on external peptides and clinical antimicrobial peptides. Our analysis shows the proposed approach achieves significantly better predictive performance (AUC-ROC of 88%) in comparison to previous approaches (HemoPI and HemoPred with AUC-ROC of 73%). HemoNet can be a useful tool in the search for novel therapeutic peptides. The python implementation of the proposed method is available at the URL: https://github.com/adibayaseen/HemoNet.

An optimized analog of antimicrobial peptide Jelleine-1 shows enhanced antimicrobial activity against multidrug resistant P. aeruginosa and negligible toxicity in vitro and in vivo

Due to the threat of escalating multi-drug resistant gram-negative bacteria to human health and life, novel antimicrobial agents against gram-negative pathogens are urgently needed. As antimicrobial peptides are not prone to induce bacteria resistance, they are believed to be one kind of promising class of potential antimicrobial agent candidates to combat multi-drug resistant bacteria for long-term use. Jelleine-1, first isolated from the royal jelly of honeybees, is a typical amphiphilic antimicrobial peptide and shows broad antimicrobial spectrum and negligible toxicity. To promote its antimicrobial activity and extend its potential of clinical use against multi-drug resistant gram-negative bacteria, novel analogs of jelleine-1 were designed, synthesized and their antimicrobial functions and toxicity were examined in this study. Our results showed that fine tuning of the cationic charge, polarity, and basicity of the sequence through amino acids substitution at position 3, 5, 7 and maintaining position 1, 4, 6, 8 unchanged could improve the bioactivity of jelleine-1 significantly. Meanwhile, we also found that the substitution of phenylalanine by tryptophan also could improve the antimicrobial activity of jelleine-1. Among all the analogs, analog 15, which is enriched in arginine and leucine, showed the most potent antimicrobial activity against both gram-negative and gram-positive bacteria, especially to multi-drug resistant Pseudomonas aeruginosa in vivo and in vitro. In addition, analog 15 also showed potent inhibition of the formation of multi-drug resistant P. aeruginosa biofilm and negligible toxicity, which was certified by MTT, hemolysis, blood assay, and biochemical analysis.

Potent intracellular antibacterial activity of a marine peptide-N6NH2 and its D-enantiomer against multidrug-resistant Aeromonas veronii

Aeromonas veronii can cause a variety of diseases such as sepsis in humans and animals. However, there has been no effective way to eradicate A. veronii. In this study, the intracellular antibacterial activities of the C-terminal aminated marine peptide N6 (N6NH₂) and its D-enantiomer (DN6NH₂) against A. veronii were investigated in macrophages and in mice, respectively. The result showed that DN6NH₂ with the minimum inhibitory concentration (MIC) of 1.62 μM is more resistant to cathepsin B than N6NH₂ (3.23 μM). The penetration percentages of the cells treated with 4-200 μg/mL fluorescein isothiocyanate (FITC)-DN6NH₂ were 52.5-99.6%, higher than those of FITC-N6NH₂ (27.0-99.1%). Both N6NH₂ and DN6NH₂ entered macrophages by macropinocytosis and an energy-dependent manner. DN6NH₂ reduced intracellular A. veronii by 34.57%, superior to N6NH₂ (19.52%). After treatment with 100 μg/mL DN6NH₂, the levels of tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), and IL-1β were reduced by 53.45%, 58.54%, and 44.62%, respectively, lower than those of N6NH₂ (15.65%, 12.88%, and 14.10%, respectively); DN6NH₂ increased the IL-10 level (42.94%), higher than N6NH₂ (7.67%). In the mice peritonitis model, 5 μmol/kg DN6NH₂ reduced intracellular A. veronii colonization by 73.22%, which was superior to N6NH₂ (32.45%) or ciprofloxacin (45.67%). This suggests that DN6NH₂ may be used as the candidate for treating intracellular multidrug-resistant (MDR) A. veronii. KEY POINTS: • DN6NH₂ improved intracellular antibacterial activity against MDR A. veronii. • DN6NH₂ entered macrophages by micropinocytosis and enhanced the internalization rates. • DN6NH₂ effectively protected the mice from infection with A. veronii.

Broad-Spectrum Antimicrobial Activity and Improved Stability of a D-Amino Acid Enantiomer of DMPC-10A, the Designed Derivative of Dermaseptin Truncates

DMPC-10A (ALWKKLLKK-Cha-NH₂) is a 10-mer peptide derivative from the N-terminal domain of Dermaseptin-PC which has shown broad-spectrum antimicrobial activity as well as a considerable hemolytic effect. In order to reduce hemolytic activity and improve stability to endogenous enzymes, a D-amino acid enantiomer (DMPC-10B) was designed by substituting all L-Lys and L-Leu with their respective D-form amino acid residues, while the Ala¹ and Trp³ remained unchanged. The D-amino acid enantiomer exhibited similar antimicrobial potency to the parent peptide but exerted lower cytotoxicity and hemolytic activity. Meanwhile, DMPC-10B exhibited remarkable resistance to hydrolysis by trypsin and chymotrypsin. In addition to these advantages, DMPC-10B exhibited an outstanding antibacterial effect against Methicillin-resistant Staphylococcus aureus (MRSA) and Klebsiella pneumoniae using the Galleria mellonella larva model and displayed synergistic activities with gentamicin against carbapenem-resistant K. pneumoniae strains. This indicates that DMPC-10B would be a promising alternative for treating antibiotic-resistant pathogens.

Synergies with and Resistance to Membrane-Active Peptides

Membrane-active peptides (MAPs) have long been thought of as the key to defeating antimicrobial-resistant microorganisms. Such peptides, however, may not be sufficient alone. In this review, we seek to highlight some of the common pathways for resistance, as well as some avenues for potential synergy. This discussion takes place considering resistance, and/or synergy in the extracellular space, at the membrane, and during interaction, and/or removal. Overall, this review shows that researchers require improved definitions of resistance and a more thorough understanding of MAP-resistance mechanisms. The solution to combating resistance may ultimately come from an understanding of how to harness the power of synergistic drug combinations.