In situ sol-gel synthesis of anatase TiO 2 -MWCNTs nanocomposites and their photocatalytic applications

Z-scheme CeO2-TiO2@CNT Heterojunction for Efficient Photoredox Removal of Mix Pollutants (CPF, MB, MO, and RhB)

Z-scheme CeO2-TiO2@CNT (CTC) heterojunction is fabricated using hydrothermal method and evaluated for removing mixed pollutants (MIX-P) from ciprofloxacin (CPF) and textile contaminations. CTC demonstrated ≈99% removal efficiency against MIX-P under solar irradiation of ≈105 lumens. High removal efficiency of CTC is attributed to reduced bandgap (Eg), 2.65 eV, and high specific surface area (68.193 m2 g-1). Lower Eg extends light absorption that generates more charge carriers and reactive species, RS (•O2 -, h+, •OH), to facilitate the photocatalytic removal process. These RS are confirmed through trapping experiments using IPA, N2, and KI. Binding energies of 282.5, 283.7, and 285 eV, corresponding to Ti─C, Ti─O─C, and Ce─C bondings, indicated coupling of TiO2, CeO2, and CNT within the CTC structure. Ionic and pH tests confirmed lower photocatalytic efficiency of CTC in an alkaline environment. Photocurrent density and EIS measurements provide insights into the charge carrier dynamics, while HPLC-MS analysis offered information on degradation pathway and identification of intermediates in the removal process. DFT studies confirmed the adjustments in electronic states, structural modifications, and band alignments in agreement with experimental results. This study highlights the potential of CTC as highly effective catalyst for sustainable removal of mixed pollutants from wastewater.

A Wooden Carbon-Based Photocatalyst for Water Treatment

Due to a large number of harmful chemicals flowing into the water source in production and life, the water quality deteriorates, and the use value of water is reduced or lost. Biochar has a strong physical adsorption effect, but it can only separate pollutants from water and cannot eliminate pollutants fundamentally. Photocatalytic degradation technology using photocatalysts uses chemical methods to degrade or mineralize organic pollutants, but it is difficult to recover and reuse. Woody biomass has the advantages of huge reserves, convenient access and a low price. Processing woody biomass into biochar and then combining it with photocatalysts has played a complementary role. In this paper, the shortcomings of a photocatalyst and biochar in water treatment are introduced, respectively, and the advantages of a woody biochar-based photocatalyst made by combining them are summarized. The preparation and assembly methods of the woody biochar-based photocatalyst starting from the preparation of biochar are listed, and the water treatment efficiency of the woody biochar-based photocatalyst using different photocatalysts is listed. Finally, the future development of the woody biochar-based photocatalyst is summarized and prospected.

Daylight Photoactive TiO2 Sol-Gel Nanoparticles: Sustainable Environmental Contribution

Visible-light-photoactive titania micro- or nanoparticles excel in a wide range of industrial areas, particularly in environmental remediation. The sol-gel methodology is one pivotal technique which has been successfully used to synthesize either crystalline and amorphous TiO₂ micro- and nanoparticles due to its outstanding chemical simplicity and versatility, along with the green chemistry approach. This short review aims to collect and discuss the most recent developments in visible-light-photoactive titania-based nanoparticles in the environmental remediation area. Titania co-doping, titania composite design, and, recently, amorphous networks have been the most used strategies to address this goal. Finally, a prediction regarding the future of these fields is given.

Nanoparticle Engineered Photocatalytic Paints: A Roadmap to Self-Sterilizing against the Spread of Communicable Diseases

Applications of visible-light photocatalytic engineered nanomaterials in the preparation of smart paints are of recent origin. The authors have revealed a great potential of these new paints for self-sterilizing of the surfaces in hospitals and public places simply with visible light exposure and this is reported for the first time in this review. A recent example of a communicable disease such as COVID-19 is considered. With all precautions and preventions taken as suggested by the World Health Organization (WHO), COVID-19 has remained present for a longer time compared to other diseases. It has affected millions of people worldwide and the significant challenge remains of preventing infections due to SARS-CoV-2. The present review is focused on revealing the cause of this widespread disease and suggests a roadmap to control the spread of disease. It is understood that the transmission of SARS-CoV-2 virus takes place through contact surfaces such as doorknobs, packaging and handrails, which may be responsible for many preventable and nosocomial infections. In addition, due to the potent transmissibility of SARS-CoV-2, its ability to survive for longer periods on common touch surfaces is also an important reason for the spread of COVID-19. The existing antimicrobial cleaning technologies used in hospitals are not suitable, viable or economical to keep public places free from such infections. Hence, in this review, an innovative approach of coating surfaces in public places with visible-light photocatalytic nanocomposite paints has been suggested as a roadmap to self-sterilizing against the spread of communicable diseases. The formulations of different nanoparticle engineered photocatalytic paints with their ability to destroy pathogens using visible light, alongwith the field trials are also summarized and reported in this review. The potential suggestions for controlling the spread of communicable diseases are also listed at the end of the review.

Couple of graphene oxide and functionalized carbon nanotubes for dye degradation enhancement of anatase under visible light and solar irradiation

Graphene oxide sheets (GO) were coupled with carbon nanotubes (CNTs) to enhance the photoactivity of anatase under visible and solar irradiation. The carbon nanotube surface was functionalized in the acidic reflux condition before coupling with GO and decoration of anatase by the sol-gel method. A modified kinetic model was appropriately applied to predict the breakthrough in the methylene blue degradation yield and determine the constant rate which was clearly affected by coupling architecture. The nanocomposite fabricated by the same proportions of GO and CNTs, 3.33%, exhibited the maximal degradation yield, 96.5%, in the dye solution with the initial concentration of 3.0 mg l-1. The characterizations based on X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and field emission scanning electron microscopy (FESEM) revealed that the functionalized CNTs could create the appropriate space between the graphene sheets for uniformly interconnection of anatase via oxygen-containing groups onto the material surfaces. This enhancement in the degradation efficiency could be ascribed to the unique architecture, leading to a decrease in bandgap energy, 2.2 eV, which facilitated the electron-hole separation. Besides of breakthrough in the photoreaction rate, the adequate architecture led to an efficient reduction in the content of carbon-based materials. Also, the performance of mentioned nanocomposite under sunlight photons was effectively higher than that under UV irradiation. The hybrid nanocomposite provided a large number of active sites for photoreactions to facilitate the treatment of wastewater under solar irradiation.

Structural refinement and electrochemical properties of one dimensional (ZnO NRs)1-x(CNs)x functional hybrids for serotonin sensing studies

Herein, the efficient serotonin (5-HT) sensing studies have been conducted using the (ZnO NRs)1-x(CNs)x nanocomposites (NCs) having appropriate structural and electrochemical properties. Initially, the different compositions of ZnO nanorods (NRs), with varying content of carbon nanostructures (CNs=MWCNTs and RGO), are prepared using simple in-situ wet chemical method and thereafter these NCs have been characterized for physico-chemical properties in correlation to the 5-HT sensing activity. XRD Rietveld refinement studies reveal the hexagonal Wurtzite ZnO NRs oriented in (101) direction with space group 'P63mc' and both orientation as well as phase of ZnO NRs are also retained in the NCs due to the small content of CNs. The interconnectivity between the ZnO NRs with CNs through different functional moieties is also studied using FTIR analysis; while phases of the constituents are confirmed through Raman analysis. FESEM images of the bare/NCs show hexagonal shaped rods with higher aspect ratio (4.87) to that of others. BET analysis and EIS measurements reveal the higher surface area (97.895 m2/g), lower charge transfer resistance (16.2 kΩ) for the ZCNT 0.1 NCs to that of other NCs or bare material. Thereafter, the prepared NCs are deposited on the screen printed carbon electrode (SPCE) using chitosan as cross-linked agent for 5-HT sensing studies; conducted through cyclic voltammetry (CV) and square wave voltammetry (SWV) measurements. Among the various composites, ZCNT0.1 NCs based electrodes exhibit higher sensing activity towards 5-HT in accordance to its higher surface area, lower particle size and lower charge transfer resistance. SWV measurements provide a wide linear response range (7.5-300 μM); lower limit of detection (0.66 μM), excellent limit of quantification (2.19 μM) and good reproducibility to ZCNT 0.1 NCs as compared to others for 5-HT sensing studies.

Boron-Doped TiO2-CNT Nanocomposites with Improved Photocatalytic Efficiency toward Photodegradation of Toluene Gas and Photo-Inactivation of Escherichia coli

An in-situ sol-gel method was used for the synthesis of boron-doped TiO2-CNT nanocomposites with varied boron concentrations from 1 to 4 mol%. The synthesized nanocomposites were characterized by various techniques, namely XRD, UV-DRS, TEM, PL, and XPS; all results show that 3 mol% B-TiO2-CNT nanocomposites have superior properties to pure TiO2, 3B-TiO2 nanoparticles, and other nanocomposites. TEM images clearly show the B-TiO2 nanoparticles decorated on the CNT surface. Photo-luminescence studies confirm that boron doping of up to 3 mol% in TiO2-CNT nanocomposites reduces the electron-hole pair recombination rate. The photocatalytic performance of the B-TiO2-CNT nanocomposites was tested against the photodegradation of toluene gas and the photocatalytic inactivation of E. coli in the presence of UV and visible light respectively. B-TiO2-CNT (3 mol%) nanocomposites show the highest photocatalytic activity.

Carbon/Graphene-Modified Titania with Enhanced Photocatalytic Activity under UV and Vis Irradiation

Laser synthesis was used for one-step synthesis of titania/graphene composites (G-TiO₂ (C)) from a suspension of 0.04 wt% commercial reduced graphene oxide (rGO) dispersed in liquid titanium tetraisopropoxide (TTIP). Reference titania sample (TiO₂(C)) was prepared by the same method without graphene addition. Both samples and commercial titania P25 were characterized by various methods and tested under UV/vis irradiation for oxidative decomposition of acetic acid and dehydrogenation of methanol (with and without Pt co-catalyst addition), and under vis irradiation for phenol degradation and inactivation of Escherichia coli. It was found that both samples (TiO₂(C) and G-TiO₂(C)) contained carbon resulting from TTIP and C₂H₄ (used as a synthesis sensitizer), which activated titania towards vis activity. The photocatalytic activity under UV/vis irradiation was like that by P25. The highest activity of TiO₂(C) sample for acetic acid oxidation was probably caused by its surface enrichment with hydroxyl groups. G-TiO₂(C) was the most active for methanol dehydrogenation in the absence of platinum (ca. five times higher activity than that by TiO₂(C) and P25), suggesting that graphene works as a co-catalyst for hydrogen evolution. High activity under both UV and vis irradiation for decomposition of organic compounds, hydrogen evolution and inactivation of bacteria suggests that laser synthesis allows preparation of cheap (carbon-modified) and efficient photocatalysts for broad environmental applications.

On the assessment of incorporation of CNT-TiO2 core-shell structures into nanoparticle TiO2 photoanodes in dye-sensitized solar cells

Herein, we report dye-sensitized solar cells (DSCs) based on conventional nanocrystalline TiO2 photoanodes decorated with one-dimensional (1D) CNT-TiO2 core-shell structures (CTH). The core-shell nanotubes are synthesized by a simple sol-gel template-assisted method via in situ deposition of TiO2 on the surface of non-covalently functionalized CNTs. The core-shell nanotubes are well characterized by various techniques. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images show that formation of the TiO2 shell on the surface of the CNT core follows a layer or Frank-van der Merwe growth mode, resulting in a highly uniform interface with excellent charge transfer from the TiO2 conduction band into the CNTs. The thickness and crystal structure of the TiO2 shell can be tailored by controlling the processing parameters. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy verify that CNTs have no surface defects and are well preserved using the employed method and the subsequent heat treatment in air, respectively. UV-vis spectroscopy and photoluminescence spectroscopy reveal an extension to visible regions with an increase in overall intensity and a significant reduction in charge recombination due to a shift of the Fermi level toward positive potentials. We find an increase by up to 37% in the DSC device's power conversion efficiency by incorporating the CNT-TiO2 core-shell nanotubes into the nanoparticle TiO2 photoanode due to the charge recombination reduction and electron injection enhancement.

Thermal and Rheological Study of Nanocomposites, Reinforced with Bi-Phase Ceramic Nanoparticles

In this study the synthesis of bi-phase nanoparticles of Fe1.46Zn0.5La0.04Cu0.5O4 (FZLCs) ceramics were first carried out by Sol-gel method and then nanocomposites of FZLCs with polyvinyl pyrrolidone (PVP), polyvinyl alcohol (PVA), polyethylene glycol (PEG) and polyethylene oxide (PEO) were prepared by one-pot blending technique. XRD, FT-IR, TG/DTA and SEM techniques were applied for complete characterization of composites. Rheological and dielectric properties of all nanocomposites were studied in detail for their comparative performance. TGA results reveal the highly thermal stability for all nanocomposites in this order i.e. FLZCs/PEO > FLZCs/PVA > FZLCs/PVP > FZLCs/PEG. Rheological properties show that these materials are rigid, pseudo plastic and non-Newtonian in nature. The increase in values for storage modulus (G′) and loss modulus (G′′) with increasing angular frequency owed to the shear thinning behavior of these nanocomposites. Dielectric properties show good agreement to that of energy storage substances which means that these materials have potential to be applied in storage devices.

Photodegradation of pharmaceuticals and personal care products in water treatment using carbonaceous-TiO2 composites: A critical review of recent literature

The high concentrations of pharmaceuticals and personal care products (PPCP) that found in water in many locations are of concern. Among the available water treatment methods, heterogeneous photocatalysis using TiO₂ is an emerging and viable technology to overcome the occurrence of PPCP in natural and waste water. The combination of carbonaceous materials (e.g., activated carbon, carbon nanotubes and graphene nanosheets) with TiO₂, a recent development, gives significantly improved performance. In this article, we present a critical review of the development and fabrication of carbonaceous-TiO₂ and its application to PPCP removal including its influence on water chemistry, and the relevant operational parameters. Finally, we present an analysis of current priorities in the ongoing research and development of carbonaceous-TiO₂ for the photodegradation of PPCP.

Photocatalytic conversion of ethylenediaminetetraacetic acid dissolved in real electroplating wastewater to hydrogen in a solar light-responsive system

A sustainable and multifunctional photocatalysis-based technology has been established herein for simultaneous hydrogen generation and oxidation of ethylenediaminetetraacetic acid (EDTA) in real electroplating wastewater. When the photocatalyst concentration was 4 g/L and electroplating wastewater pH was 6, optimal adsorptions of EDTA^2-, H⁺, and H₂O were observed, while hydrogen generation efficiency reached 305 µmol/(h g). Owing to EDTA oxidation and occupation of the active sites of the photocatalyst by Ni ions or Ni-EDTA chelates, the charge separation and adsorptions of H⁺ and H₂O decreased, reducing hydrogen generation efficiency with time. The lower EDTA and Ni concentrations in treated wastewater showed that photocatalytic conversion of EDTA in real electroplating wastewater to enhance hydrogen generation efficiency can be a practical alternative energy production technology. This study provided a novel idea to enhance the value of electroplating wastewater, to build a hydrogen generation route with no consumption of a valuable resource, and to reduce EDTA and Ni concentrations in electroplating wastewater.

Structural and Optical Properties of Nanocrystalline TiO2 with Multiwalled Carbon Nanotubes and Its Photovoltaic Studies Using Ru(II) Sensitizers

In this study, the in situ sol-gel method has been deployed to prepare the titanium dioxide/multiwalled carbon nanotubes (TiO₂/MWCNTs) nanocomposite (NCs) powders with varying content of MWCNTs (0.01-1.0 wt %), to construct the dye-sensitized solar cells (DSSCs). First, binder-free NCs were deposited on a transparent-conducting F:SnO₂ (FTO) glass substrate by a doctor-blade technique and then anchored with Ru(II)-based dyes to either N719 or ruthenium phthalocyanine (RuPc). The structural and optical properties and interconnectivity of the materials within the composite are investigated thoroughly by various spectral techniques (XRD, XPS, Raman, FT-IR, and UV-vis), electron microscopy (HRTEM), and BET analysis. The experimental results suggest that the ratio of MWCNTs and TiO₂ in NCs, morphology, and their interconnectivity influenced their structural, optical, and photovoltaic properties significantly. Finally, the photovoltaic performances of the assembled DSSCs with different content of MWCNTs to TiO₂ films anchored with two different dyes were tested under one sun irradiation (100 mW/cm²). The measured current-voltage (IV) curve and incident photon-to-current conversion efficiency (IPCE) spectra of TiO₂/0.1 wt % MWCNTs (T@0.1 C) for N719 dye show three times more power conversion efficiency (η = 6.21%) which is opposed to an efficiency (η = 2.07%) of T@0.1 C for RuPc dye under the same operating conditions.

Sonocatalytic degradation of an anthraquinone dye using TiO2-biochar nanocomposite

TiO₂-biochar (TiO₂-BC) nanocomposite was synthesized by sol-gel method. The characteristics of the prepared nanocomposite were examined using X-ray fluorescence, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy and N₂ adsorption-desorption analysis. The performance of synthesized TiO₂-BC nanocomposite as efficient sonocatalyst was studied for the degradation of Reactive Blue 69 (RB69). Sonocatalytic degradation of RB69 in the presence of TiO₂-BC nanocomposite could be explained by the mechanisms of hot spots and sonoluminescence. The optimized values for main operational parameters were determined as pH of 7, TiO₂-BC dosage of 1.5g/L, RB69 initial concentration of 20mg/L and ultrasonic power of 300W. Furthermore, the effect of OH, h⁺ and O₂^- scavengers on the RB69 degradation efficiency was studied. Gas chromatography-mass spectroscopy analysis was used to identify intermediate compounds formed during the RB69 degradation. The results of repeated applications of TiO₂-BC in the sonocatalytic process verified its stability in long-term usage.