Application of decorated magnetic nanophotocatalysts for efficient photodegradation of organic dye: A comparison study on photocatalytic activity of magnetic zinc sulfide and graphene quantum dots

Ultrasmall copper-metal organic framework (Cu-MOF) quantum dots decorated on waste derived biochar for enhanced removal of emerging contaminants: Synergistic effect and mechanistic insight

This study proposes a novel one-pot hydrothermal impregnation strategy for surface decoration of waste derived pisum sativum biochar with zero‒dimensional Cu‒MOF Quantum dots (PBC‒HK), with an average particle size of 5.67 nm, for synergistic removal of an emerging sulfur containing drug pantoprazole (PTZ) and Basic Blue 26 (VB) dye within 80 min and 50 min of visible-light exposure, respectively. The designed Integrated Photocatalytic Adsorbent (IPA) presented an enhanced PTZ removal efficiency of 95.23% with a catalyst loading of 0.24 g/L and initial PTZ conc. 30 mg/L at pH 7, within 80 min via synergistic adsorption and photodegradation under visible-light exposure. While, on the other hand, 96.31% VB removal efficiency was obtained in 50 min with a catalyst dosage of 0.20 g/L, initial VB conc. 60 mg/L at pH 7 under similar irradiation conditions. An in-depth analysis of the synergistic adsorption and photocatalysis mechanism resulting in the shortened time for the removal of contaminants in the synergistic integrated model has been performed by outlining the various advantageous attributes of this strategy. The first-order degradation rate constant for PTZ was found to be 0.04846 min-1 and 0.04370 min-1 for PTZ and VB, respectively. Adsorption of contaminant molecules on the biochar (PS‒BC) surface can facilitate photodegradation by accelerating the kinetics, and photodegradation promotes regeneration of adsorption sites, contributing to an overall reduction in operation time for removal of contaminants. Besides enhancing the adsorption of targeted pollutants, the carbon matrix of IPAs serves as a surface for adsorption of intermediates of degradation, thereby minimizing the risk of secondary pollution. The photogenerated holes present in the VB is responsible for the generation of •OH radicals. While, the photogenerated electrons present in the CB are captured by Cu2+ of the MOF metal center, reducing it to Cu+, which is subsequently oxidized to produce additional •OH species in the aqueous medium. This process leads to effective charge separation of the photogenerated charge carriers and minimizes the probability of charge recombination as evident from photoluminescence (PL) analysis. Meanwhile, PL studies, EPR and radical trapping experiments indicate the predominant role of •OH radicals in the removal mechanism of PTZ and VB. The investigation of the degradation reaction intermediates was confirmed by HR‒LCMS, on the basis of which the plausible degradation pathway was elucidated in detail. Moreover, effects of pH, inorganic salts, other organic compounds and humic acid concentration have been investigated in detail. The environmental impact of the proposed method was comprehensively evaluated by ICP-OES analysis and TOC and COD removal studies. Furthermore, the economic feasibility and the cost-effectiveness of the catalyst was assessed to address the potential for large scale commercialization. Notably, this research not only demonstrates a rational design strategy for the utilization of solid waste into treasure via the fabrication of IPAs based on MOF Quantum dots (QDs) and waste-derived biochar, but also provides a practical solution for real wastewater treatment systems for broader industrial applications.

Degradation Efficiency of Organic Dyes on CQDs As Photocatalysts: A Review

Across the globe, the task of providing clean and safe drinking water is getting harder. Organic contaminants, including dyes and pharmaceutical medications, are a significant environmental threat, especially in aquatic bodies due to their uncontrolled emission. Therefore, a method for their degradation in water bodies that is both environmentally friendly and commercially feasible must be developed. In the realm of photocatalysis, carbon-based nanomaterials have drawn more attention in the last ten years. Due to their exceptional and distinct qualities, metal-free carbon-based photocatalytic systems have received a lot of attention recently for their ability to degrade organic contaminants into semiconductor quantum dots, which are already available. A class of nanomaterials with a particle size between 2 and 10 nm showing distinct optoelectrical characteristics is among the variety of catalytic quantum dots. This review covers several synthesis techniques such as electrochemical, laser ablation, microwave radiation, hydrothermal, and optical features of CQDs such as the photoluminescent (PL) property and quantum confinement effect. The uses of CQDs in the degradation of various dyes as well as the difficulties that still exist and the opportunities that lie ahead have also been explored.

Unveiling the multifaceted applications of magnetically responsive chitosan capped ZnS QDs for sensing and annihilation of pharmaceutical drugs

The persistence of active pharmaceutical ingredients in water bodies has lead to detrimental impacts on public health as well as deteriorated aquatic resources at breakneck pace. To address this, highly fluorescent chitosan capped ZnS QDs (CZS QDs) were integrated with nickel ferrite nanoparticles (NF NPs) through ultrasonic assisted method to yield a series of magnetically responsive CZS-xNF nanohybrids (x = 5, 10, 15 and 20 wt% of NF). The successful fabrication of nanohybrids were affirmed through various techniques such as Fourier transform infra-red spectroscopy (FT-IR), powder X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), high resolution transmission electron microscopy (HRTEM), vibrating sample magnetometer (VSM) and diffused reflectance spectroscopy (DRS). The dual applicability of CZS-xNF nanohybrid was witnessed for the detection of pharmaceutical waste by fluorescence sensing and their concomitant annihilation via visible light driven photodegradation reactions. The developed nanohybrid showed exceptional selectivity towards tetracycline antibiotics, with ultra-low limit of detection of 0.53 μM for tetracycline (TC) and 0.30 μM for minocycline (MC), respectively. The fluorescent sensor was also analysed for trace level detection of tetracyclines in real water samples that showed satisfactory recoveries of 90-106%, depicting practical applicability of sensor. Additionally, the excellent photocatalytic features of synthesized nanohybrid prompted their use in photodegradation of TC and MC and a superior photocatalytic performance was achieved in comparison to CZS QDs. The enhanced photocatalytic performance of CZS-xNF nanohybrid can be attributed to type-I charge transfer mechanism, which resulted in efficient charge separation and reduced photo-induced recombination rate of charge carriers. The nanohybrids were recyclable up to four cycles after being utilized in sensing and photocatalysis, thus offering a promising strategy for environmental remediation through synchronized sensing and extirpation of pharmaceutical waste.

Ultra-sensitive detection of tumor necrosis factor alpha based on silver-coated gold core shell and magnetically separated recognition of SERS aptamer sensors

A highly sensitive tumor necrosis factor α (TNF-α) detection method based on a surface-enhanced Raman scattering (SERS) magnetic patch sensor is reported. Magnetic beads (MNPs) and core shells were used as the capture matrix and signaling probe, respectively. For this purpose, antibodies were immobilized on the surface of magnetic beads, and then Au@4-MBN@Ag core-shell structures coupled with aptamers and TNF-α antigen were added sequentially to form a sandwich immune complex. Quantitative analysis was performed by monitoring changes in the characteristic SERS signal intensity of the Raman reporter molecule 4-MBN. The results showed that the limit of detection (LOD) of the proposed method was 4.37 × 10-15 mg·mL-1 with good linearity (R2 = 0.9918) over the concentration range 10-12 to 10-5 mg·mL-1. Excellent assay accuracy was also demonstrated, with recoveries in the range 102% to 114%. Since all reactions occur in solution and are separated by magnetic adsorption of magnetic beads, this SERS-based immunoassay technique solves the kinetic problems of limited diffusion and difficult separation on solid substrates. The method is therefore expected to be a good clinical tool for the diagnosis of the inflammatory biomarker THF-α and in vivo inflammation screening.

Emerging Trends of Carbon-Based Quantum Dots: Nanoarchitectonics and Applications

Carbon-based quantum dots (QDs) have emerged as a fascinating class of advanced materials with a unique combination of optoelectronic, biocompatible, and catalytic characteristics, apt for a plethora of applications ranging from electronic to photoelectrochemical devices. Recent research works have established carbon-based QDs for those frontline applications through improvements in materials design, processing, and device stability. This review broadly presents the recent progress in the synthesis of carbon-based QDs, including carbon QDs, graphene QDs, graphitic carbon nitride QDs and their heterostructures, as well as their salient applications. The synthesis methods of carbon-based QDs are first introduced, followed by an extensive discussion of the dependence of the device performance on the intrinsic properties and nanostructures of carbon-based QDs, aiming to present the general strategies for device designing with optimal performance. Furthermore, diverse applications of carbon-based QDs are presented, with an emphasis on the relationship between band alignment, charge transfer, and performance improvement. Among the applications discussed in this review, much focus is given to photo and electrocatalytic, energy storage and conversion, and bioapplications, which pose a grand challenge for rational materials and device designs. Finally, a summary is presented, and existing challenges and future directions are elaborated.

Photo-catalytic and biomedical applications of one-step, plant extract-mediated green-synthesized cobalt oxide nanoparticles

In the present work, for the first time, green chemically synthesized and stabilized Co₃O₄ nanoparticles were employed for catalytic conversion of isopropyl alcohol to acetone by dehydrogenation of IPA. Plant extract of Rosmarinus officinalis was used as a reducing and stabilizing agent for this synthesis. The biosynthesized Co₃O₄ nanoparticles were annealed at 450℃ followed by their physiochemical characterizations through XRD, SEM, AFM, and FTIR. Size distribution information collected through XRD and AFM back each other, and it was found to be 6.5 nm, having the highest number of nanoparticles in this size range. While SEM confirms the self-arranging property of synthesized nanoparticles due to their magnetic nature, furthermore, the biogenic Co₃O₄ nanoparticles were studied for their catalytic potential to convert isopropyl alcohol to acetone with the help of a UV-Visible spectrophotometer. The highest photocatalytic conversion of 99% was obtained in time period of 48 s. For the first time ever, nanoparticles were used for 5 cycles to evaluate their recyclable nature and conversion fell from 99 to 86% and the end of the 5th cycle. Later anti-bacterial activity against 3 Gram-positive and 3 Gram-negative strains gave the highest inhibition value of 99% against Streptococcus pneumoniae at 500 µg/mL. Finally, a cytotoxicity study on synthesized nanomaterials was carried out by exposing freshly drawn human macrophages to them. It was found that even at the highest concentration of 500 µg/mL, the nanoparticles showed only 28% lysis.

Volatile organic compounds (VOCs) removal by photocatalysts: A review

Amplified anthropogenic release of volatile organic compounds (VOCs) gets worse air quality and human health. Photocatalytic degradation of VOCs is the practical strategy due to its low cost, simplicity, high efficiency, and environmental sustainability. Different types of photocatalyst activated by UV and visible lights are applied for VOC degradation. This review tries to investigate the state-of-art of recently published papers on this subject with a focus on the high-efficiency photocatalyst. The novel photocatalysts are introduced and enhancing photocatalytic activity strategies such as the hybrid of two/three photocatalyst, impurity doping, and heterojunctions with narrow bandgap semiconductors have been explained. The procedures of visible light activation of the photocatalysts are discussed with attention to current problems and future challenges. In addition, effective operational parameters in the photocatalytic degradation of VOCs have been reviewed with their advantages and drawbacks. A series of strategies are developed for the efficient utilization of visible light photocatalysts and improving new materials or design structures to degrade produced toxic intermediates/by-products during photocatalytic degradation of VOCs. This review shows that there are significant challenges in the applications of photocatalysts in the selective removal of VOCs. Several approaches should be combined to produce synergistic effects, which may lead to much higher photocatalytic performance than individual strategies. Another challenge is to develop efficient photocatalysts to meet real problems on an industrial scale.

Synthesis of sulfhydryl functionalized silicon quantum dots with high quantum yield for imaging of hypochlorite in cells and zebrafish

Sulfhydryl functionalized silicon quantum dots (S-SiQDs) with a fluorescence quantum yield of 38.5% were synthesized using 3-mercaptopropyltrimethoxysilane (MPTMS) and m-phenylenediamine by a simple one-pot method. It is worth noting that by oxidizing the surface sulfhydryl groups and statically quenching, the fluorescence of S-SiQDs at 492 nm (excitation at 383 nm) can be selectively quenched by hypochlorite (ClO^-) in a linear range of 0.05 to 1.8 μM with a low detection limit of 13 nM. The reaction was completed in 10 s with no interference from other ROS, metal ions, anions and reducing species. The silicon source containing sulfhydryl groups was used to synthesize silicon quantum dots for the first time, and the surface of the S-SiQDs was provided with sulfhydryl groups and reacted rapidly and sensitively with ClO^-. The S-SiQDs have good photostability and biocompatibility, and can be further used for ClO^- imaging in MCF-7 cells and zebrafish, showing great promise in biological imaging. The proposed assay demonstrates that 3-mercaptopropyltrimethoxysilane is a good choice to obtain a functionalized fluorescent nanoprobe for redox species.

The synergistic effect of peracetic acid activated by graphene oxide quantum dots in the inactivation of E. coli and organic dye removal with LED reactor light

This study presents a low-impact process that uses the synergy of peracetic acid (PAA) and graphene oxide quantum GQDs to degrade poorly biodegradable organic compounds and potentially substitute chlorination in wastewater treatment. The role of GQDs in GQDs/PAA activity and the effect of GQDs loading were examined. The results showed that increasing GQDs loading in the GQDs/PAA system greatly improved the photodegradation efficiency. Conversely, increasing the PAA concentration slightly enhanced efficiency due to few active sites being available. GQDs acted as catalysts and radical scavenging experiments confirmed that the degradation occurred via generation of hydroxyl (•OH) and peroxy (CH₃C(=O)OO•)) radicals. A probable degradation mechanism of the organic dye was presented based on the reaction by-products detected after HPLC-MS studies. The E. coli inactivation mechanism was elucidated by monitoring the morphological changes of E. coli using scanning microscopy. The proposed antimicrobial mechanism includes the initial diffusion of PAA through the cell membrane which caused damage and induced cellular matter leakage, resulting in cell death. Bacterial regrowth studies confirmed GQDs/PAA were able to bypass the natural mechanisms of microorganisms that enables them to repair any damages in their DNA.

A new strategy to construct cellulose-chitosan films supporting Ag/Ag2O/ZnO heterostructures for high photocatalytic and antibacterial performance

The industrial wastewater contaminants including dyes and bacteria have caused serious environmental pollutions. Herein, ternary Ag/Ag₂O/ZnO heterostructure decorating cellulose-chitosan films were constructed via in situ synthesis. Cellulose and chitosan dissolved in alkali/urea solvent and regenerated in ethylene glycol to form cellulose/chitosan nanofiber network, which was an ideal supporter for ZnO and Ag nanoparticles and beneficial for recycle usage. The hydroxyl groups of cellulose and chitosan chains exposed and were utilized for the synthesis of Ag particles, as well as ZnO nanoparticles by biomineralization. The Ag/Ag₂O/ZnO decorating cellulose/chitosan (AZ@CC) films exhibited excellent antibacterial activity against Staphylococcus aureus and Escherichia coli. The width of inhibition zones around AZ@CC films reached 10.0-19.6 mm and 12.4-15.0 mm for S. aureus and E. coli, respectively. Moreover, AZ@CC films exhibited good photocatalytic activity against methyl orange (MO), almost 97% degradation of methyl orange (MO) within 50 min was achieved with the assistance of AZ@CC film. Importantly, the nanocomposite films exhibited excellent tensile strength and thermal stability. This facile and eco-friendly approach provided a new route to utilize cellulose and chitosan advantages for constructing multifunctional materials.

Shedding Light on Graphene Quantum Dots: Key Synthetic Strategies, Characterization Tools, and Cutting-Edge Applications

During the last 20 years, the scientific community has shown growing interest towards carbonaceous nanomaterials due to their appealing mechanical, thermal, and optical features, depending on the specific nanoforms. Among these, graphene quantum dots (GQDs) recently emerged as one of the most promising nanomaterials due to their outstanding electrical properties, chemical stability, and intense and tunable photoluminescence, as it is witnessed by a booming number of reported applications, ranging from the biological field to the photovoltaic market. To date, a plethora of synthetic protocols have been investigated to modulate the portfolio of features that GQDs possess and to facilitate the use of these materials for target applications. Considering the number of publications and the rapid evolution of this flourishing field of research, this review aims at providing a broad overview of the most widely established synthetic protocols and offering a detailed review of some specific applications that are attracting researchers’ interest.

Magnetic CuNiFe2O4 nanoparticles loaded on multi-walled carbon nanotubes as a novel catalyst for peroxymonosulfate activation and degradation of reactive black 5

Novel copper-nickel ferrite nanocatalyst loaded on multi-walled carbon nanotube (MWCNTs-CuNiFe₂O₄) was synthesized and applied to activate peroxymonosulfate (PMS) in the degradation of the reactive black 5 (RB5). The structure of the catalyst was well characterized by scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD). The MWCNTs-CuNiFe₂O₄/PMS system showed a high performance in the degradation of RB5 with a kinetic rate of 1.5-2.5 times higher than homogeneous and heterogeneous systems. Maximum degradation efficiency (99.60%) was obtained at an initial pH of 7, catalyst dosage of 250 mg/L, PMS dosage of 4 mM, the temperature of 25 °C, and reaction time of 15 min. Anion experiments emphasized that the presence of nitrate, carbonate, and phosphate in the solution reduced the degradation efficiency by producing reactive species with low oxidation potential. The RB5 degradation rate evolved with temperature, and the activation energy was obtained to be 44.48 kJ/mol. The mechanism of PMS activation and production of free radicals was proposed based on tert-butyl alcohol (TBA), ethanol (EtOH), and potassium iodide (KI) scavengers. Trapping experiments showed that both sulfate (SO₄^•-) and hydroxyl (^•OH) radicals are involved in the catalytic degradation of RB5. The effective treatment of real wastewater and tap water by the MWCNTs-CuNiFe₂O₄/PMS system requires a long reaction time. Gas chromatography-mass spectrometry (GC-MS) analysis indicated that RB5 can be degraded via methylation, decarboxylation, hydroxylation, and ring/chain cleavage pathways. The stable catalytic activity after three consecutive cycles suggested that MWCNTs-CuFe₂O₄ is a novel reusability catalyst in PMS activation.

Solochrome Dark Blue Azo Dye Removal by Sonophotocatalysis Using Mn2+ Doped ZnS Quantum Dots

This work investigates the degradation of the azo dye solochrome dark blue (SDB) by measurement of the photocatalytic, sonocatalytic and sonophotocatalytic activities, under low ultrasonic frequency (40 kHz) and UV-C (254 nm) light, using Mn-doped ZnS semiconductor quantum dots (Mn2+:ZnS Qds) as catalysts, prepared by a simple chemical precipitation procedure. In order to study the different morphological and optical crystal properties, various characterization techniques were used, such as high resolution transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, N2 adsorption-desorption at −196 °C and ultraviolet-visible spectroscopy. The average particle size of the semiconductor Qds was in the range of 3–4 nm. The optimal parameters affecting dye degradation, such as the catalyst loading, solution pH, time of irradiation, initial concentration of dye, dopant concentration, ultrasonic power and frequency effect were evaluated. The synthesized catalytic material exhibited a high activity for sonophotocatalytic degradation of SDB (89%), larger than that observed for sonocatalysis (69.7%) or photocatalysis (55.2%) alone, which was due to the improved electron-holes separation, formation of more reactive radicals and enhancement of the active surface area. Qds showed good stability and reusability after five repeated cycles. Finally, the degradation products were identified by liquid chromatography-mass spectrometry (LC-MS).

Enhanced solar-driven photocatalytic performance of a ternary composite of SnO2 quantum dots//AgVO3 nanoribbons//g-C3N4 nanosheets (0D/1D/2D) structures for hydrogen production and dye degradation

Herein, we report the synthesis of between SnO₂ QDs /AgVO₃ nanoribbons/g-C₃N₄ nanosheets of ternary photocatalytic systems for the production of H₂ through light irradiation. The SnO₂/AgVO₃/g-C₃N₄ photocatalyst was successfully produced by using the hydrothermal process. The structural characterizations of the samples revealed the successful formation of ternary heterostructures where SnO₂, AgVO₃ and g-C₃N₄ (quantum dots/nanoribbons/nanosheets) 0D/1D/2D structures make a good interface with each other. The fabricated heterostructures of AgVO₃/g-C₃N₄ and SnO₂/AgVO₃/g-C₃N₄ photocatalytic structures performed enriched photocatalytic performance for H₂ production over that of the pristine g-C₃N₄, AgVO₃ and SnO₂ photocatalysts. The AgVO₃/g-C₃N₄ and SnO₂ /AgVO₃/g-C₃N₄ of photocatalysts were found to produce H₂ of around 17,000 μmol g^-1 and 77,000 μmol g^-1, respectively, which is much 4.5 times greater than that of AgVO₃/g-C₃N₄ photocatalyst. Moreover, the photodegradation behaviours of prepared catalysts were studied with the dye (rhodamine B, RhB) under light irradiation. The ternary composite SnO₂/AgVO₃/g-C₃N₄ performed photodegradation of RhB in 50 min. The higher photocatalytic activity for the ternary photocatalysts is predominantly due to the effective charge separation at the perfect interface formation amid SnO₂ and AgVO₃/g-C₃N₄.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.