Engineering titanium-organic framework decorated silver molybdate and silver vanadate as antimicrobial, anticancer agents, and photo-induced hydroxylation reactions

Design, Synthesis, Antibacterial, and Antifungal Evaluation of a New Series of Quinazoline - Thiazole and/or Quinazoline - Triazole Hybrids as Bioactive Heterocycles

Herein, a one-pot reaction between cyclohexanone, thiourea, and 2,5-dimethoxybenzaldehyde allowed to prepare hexahydroquinazoline-2(1H)-thione4 firstly, which followed by reacting with hydrazine hydrate to produce the corresponding 2-hydrazinylhexahydroquinazoline 6. Interesting analogs of thiazolo[3,2-a]quinazoline 713 where obtained when hexahydroquinazoline-2(1H)-thione 4 reacted with 1,2-dibromoethane, chloroacetyl chloride, bromoacetic acid, bromoacetic acid/4-chlorobenzaldehyde, 2-bromopropionic acid, ethyl bromo cyanoacetate, and/or bromomalononitrile; respectively. While triazolo[4,3-a] quinazoline 14-16 were created when 2-hydrazinylhexahydroquinazoline 6 reacted with triethyl orthoformate, acetic anhydride, and carbon disulfide respectively. Numerous spectroscopy tests, including FT-IR, NMR (1H &13 C), and MS spectrum, proved all the newly produced analogs. Additionally, the new analogs were examined for their antibacterial and antifungal properties against Escherichia coli, Staphylococcus aureus, and Candida albicans. It was discovered that triazolo[4,3-a] quinazoline analogs 14-16 have superior bacterial and fungal activity when compared to the corresponding conventional doses of Streptomycin andGriseofulvin. Towards Candida albicans; compounds 14, 15, and 16 increase activity with 1.14 %, 1.15 %, and 1.21 %, respectively more than griseofulvin.While, for Staphylococcus aureus; compounds 14, 15, and 16 increase activity with 1.5 %, 1.5 %, and 1.7 %, respectively more than streptomycin. Morever, for Escherichia coli; compounds 14, 15, and 16 increase activity with 1.19 %, 1.21 %, and 1.22 %, respectively more than streptomycin. Finally, structure activity relationships show that quinazoline derivatives exhibit higher activity when fused to pyrazole ring 14-16 as compared when fused thiophene ring 7-13.

Urea production via photocatalytic coupling of mixed gases (CO2/NH3) using Mo(MnO4)5 supported on Ce-BTC as nano-composite catalyst

Urea used in fertilization and feed supplement, as well as a starting material for the manufacture of plastics and drugs. Urea is most commonly produced by reacting carbon dioxide with ammonia at high temperature. Photocatalysis has gained attention as a sustainable pathway for performing urea. This work focus on designing very active photocatalysts based on cerium organic framework (Ce-BTC) doped with metal oxide nanoparticles (molybdenum permanganate, Mo(MnO4)5) for production of urea from coupling of ammonia with carbon dioxide. The prepared materials were characterized using different spectral analysis and the morphology was analysed using microscopic data. The effect of catalyst loading on the production rate of urea was investigated and the obtained results showed speed rate of urea production with high production yield at low temperature. The recyclability tests confirmed the sustainability of the prepared photocatlysts (Mo(MnO4)5@Ce-BTC) which supported the beneficial of the photocatalysis process in urea production.

Antibacterial and Anticandidal Activity of the Nanostructural Composite of a Spirothiazolidine-Derivative Assembled on Silver Nanoparticles

Our aims in this work are the preparation of an ionic liquid based on heterocyclic compounds with Ag nanoparticles and the investigation of its application as an antibacterial and anticandidal agent. These goals were achieved through the fabrication of an ionic liquid based on Ag nanoparticles with 5-Amino-3-(4-fluorophenyl)-N-hexadecyl-7-(4-methylphenyl)-2-H spiro[cyclohexane1,2'-[1,3]thiazolo [4,5-b]pyridine]-6-carbonitrile (P16). The nanostructure of the prepared ionic liquid was characterized using techniques such as FTIR, 1HNMR, 13CNMR, UV, SEM, and TEM. The biological activity of the prepared compound (P16) and its nanocomposites with Ag nanoparticles was tested using five clinical bacteria (Pseudomonas aeruginosa 249; Escherichia coli 141; Enterobacter cloacae 235; Staphylococcus epidermidis BC 161, and methicillin-resistant S. aureus 217), and three Candida species (Candida utilis ATCC 9255; C. tropicalis ATCC 1362, and C. albicans ATCC 20402). The FTIR, 1HNMR, and 13CNMR results confirmed the chemical structure of the synthesized P16 compound. The nanostructure of the prepared ionic liquid was determined based on data obtained from the UV, SEM, and TEM tests. The antibacterial and anticandidal results showed that the biological activity of the compound (P16) was enhanced after the formation of nanocomposite structures with Ag nanoparticles. Moreover, the biological activity of the compound itself (P16) and that of its nanocomposite structure with Ag nanoparticles was higher than that of ampicillin and amphotericin B, which were used as control drugs in this work.

Anthraquinone-Modified Silica Nanoparticles as Heterogeneous Photocatalyst for the Oxidative Hydroxylation of Arylboronic Acids

In this work, the synthesis and characterization of a heterogeneous photocatalyst based on spherical silica nanoparticles superficially modified with anthraquinone 2-carboxylic acid (AQ-COOH) are presented. The nanomaterial was characterized by TEM, SEM, FT-IR, diffuse reflectance, fluorescence, NMR, DLS, XRD and XPS. These analyses confirm the covalent linking of AQ-COOH with the NH2 functionality in the nanomaterial and, more importantly, the photocatalyst retains its photophysical properties once bound. The heterogeneous photocatalyst was successfully employed in the aerobic hydroxylation of arylboronic acids to phenols under sustainable reaction conditions. Phenols were obtained in high yields (up to 100 %) with low catalyst loading (3.5 mol %), reaching TOF values of 3.7 h-1 . Using 2-propanol as solvent at room temperature, the visible light photocatalysis produced H2 O2 as a key intermediate to promote the aerobic hydroxylation of arylboronic acids. The heterogeneous photocatalyst was reused at least 5 times, without modification of the nanomaterial structure and morphology. This simple heterogeneous system showed great catalytic activity under sustainable reaction conditions.

Origin of Antibiotics and Antibiotic Resistance, and Their Impacts on Drug Development: A Narrative Review

Antibiotics have revolutionized medicine, saving countless lives since their discovery in the early 20th century. However, the origin of antibiotics is now overshadowed by the alarming rise in antibiotic resistance. This global crisis stems from the relentless adaptability of microorganisms, driven by misuse and overuse of antibiotics. This article explores the origin of antibiotics and the subsequent emergence of antibiotic resistance. It delves into the mechanisms employed by bacteria to develop resistance, highlighting the dire consequences of drug resistance, including compromised patient care, increased mortality rates, and escalating healthcare costs. The article elucidates the latest strategies against drug-resistant microorganisms, encompassing innovative approaches such as phage therapy, CRISPR-Cas9 technology, and the exploration of natural compounds. Moreover, it examines the profound impact of antibiotic resistance on drug development, rendering the pursuit of new antibiotics economically challenging. The limitations and challenges in developing novel antibiotics are discussed, along with hurdles in the regulatory process that hinder progress in this critical field. Proposals for modifying the regulatory process to facilitate antibiotic development are presented. The withdrawal of major pharmaceutical firms from antibiotic research is examined, along with potential strategies to re-engage their interest. The article also outlines initiatives to overcome economic challenges and incentivize antibiotic development, emphasizing international collaborations and partnerships. Finally, the article sheds light on government-led initiatives against antibiotic resistance, with a specific focus on the Middle East. It discusses the proactive measures taken by governments in the region, such as Saudi Arabia and the United Arab Emirates, to combat this global threat. In the face of antibiotic resistance, a multifaceted approach is imperative. This article provides valuable insights into the complex landscape of antibiotic development, regulatory challenges, and collaborative efforts required to ensure a future where antibiotics remain effective tools in safeguarding public health.

Photodynamic Cationic Ultrasmall Copper Oxide Nanoparticles-Loaded Liposomes for Alleviation of MRSA Biofilms

Introduction

As we enter the post-antibiotic era, the rise of antibiotic-resistant pathogenic bacteria is becoming a serious threat to public health. This problem is further complicated by antibiotic-resistant biofilms, for which current treatment options are limited.

Methods

To tackle this challenge, we propose a novel approach that involves the use of photodynamic cationic pH-sensitive liposomes loaded with ultra-small copper oxide (Ce6@Lipo/UCONs) to effectively eliminate drug-resistant bacteria and eradicate biofilms while minimizing safety concerns and the risk of resistance development.

Results

Our study demonstrates that Ce6@Lipo/UCONs have minimal toxicity to mammalian cells and can significantly enhance the association affinity with methicillin-resistant Staphylococcus aureus (MRSA) as confirmed by fluorescent microscope and flow cytometry, thereby greatly improving the bactericidal effect against planktonic MRSA. The cationic nature of Ce6@Lipo/UCONs also enables them to penetrate MRSA biofilms and respond to the acidic microenvironment within the biofilm, effectively releasing the loaded UCONs. Our results indicate that Ce6@Lipo/UCONs could effectively eliminate biofilms under light irradiation conditions, as evidenced by both biomass analysis and scanning electron microscopy observations. In addition, significant antibacterial effects and abscess healing were observed in MRSA-infected mice treated with Ce6@Lipo/UCONs upon light irradiation, while good biocompatibility was achieved in vivo.

Conclusion

Taken together, our findings suggest that photodynamic cationic ultrasmall copper oxide nanoparticles-loaded liposomes are a highly promising nano platform for combating antibiotic-resistant microbial pathogens and biofilms. The effective biofilm penetration and synergistic effect between photodynamic inactivation and metal sterilization make them a valuable tool for overcoming the challenges posed by antibiotic resistance.

Carboxymethyl cellulose/sulfur-functionalized Ti-based MOF composite: synthesis, characterization, antimicrobial, antiviral and anticancer potentiality

Microbial resistance is the first morbidity and mortality cause for patients as usually a secondary infection. Additionally, the MOF is a promising material that shows a nice activity in this field. However, these materials need a good formulation to enhance biocompatibility and sustainability. Cellulose and its derivatives are well as filers for this gap. In this presented work, a novel green active system based on carboxymethyl cellulose and Ti-MOF (MIL-125-NH₂@CMC) modified with thiophene (Thio@MIL-125-NH₂@CMC) was prepared by a post-synthetic modification (PSM) route based. FTIR, SEM and PXRD were utilized to characterize nanocomposites. In addition, transmission electron microscopy (TEM) was used to corroborate the nanocomposites' particle size and diffraction pattern as well as the DLS affirmed the size as 50 and 35 nm for MIL-125-NH₂@CMC and Thio@MIL-125-NH₂@CMC, respectively. The formulation of the nanocomposites was validated by physicochemical characterization techniques, while morphological analysis confirmed the nanoform of the prepared composites. The antimicrobial, antiviral and antitumor properties of MIL-125-NH₂@CMC and Thio@MIL-125-NH₂@CMC were assessed. Antimicrobial testing revealed that Thio@MIL-125-NH₂@CMC possesses greater antimicrobial activity than MIL-125-NH₂@CMC. Additionally, Thio@MIL-125-NH₂@CMC demonstrated promising antifungal activity against C. albicans and A. niger where MICs were 31.25 and 0.97 µg/mL, respectively. Also, Thio@MIL-125-NH₂@CMC exhibited antibacterial activity against E. coli and S. aureus where MICs were 1000 and 250 µg/mL, respectively. In addition, the results demonstrated that Thio@MIL-125-NH₂@CMC displayed promising antiviral activity against both HSV1 and COX B4, with antiviral activities of 68.89% and 39.60%, respectively. Furthermore, Thio@MIL-125-NH₂@CMC exhibited potential anticancer activity against MCF7 and PC3 cancerous cell lines, where IC₅₀ was 93.16 and 88.45%, respectively. In conclusion, carboxymethyl cellulose/sulfur-functionalized Ti-based MOF composite was successfully synthesized which had antimicrobial, antiviral and anticancer activities.

Efficient phenolic compounds adsorption by immobilization of copper-based metal-organic framework anchored polyacrylonitrile/chitosan beads

The application of newly formulated beads from copper-benzenetricarboxylate (Cu-BTC), polyacrylonitrile (PAN), and chitosan (C), Cu-BTC@C-PAN, C-PAN, and PAN, for the removal of phenolic chemicals from water, is described in the current paper. Phenolic compounds (4-chlorophenol (4-CP) and 4-nitrophenol (4-NP)) were adsorbed using beads and the adsorption optimization looked at the effects of several experimental factors. The Langmuir and Freundlich models were used to explain the adsorption isotherms in the system. A pseudo-first and second-order equation is performed for describing the kinetics of adsorption. The obtained data fit (R² = 0.999) supports the suitability of the Langmuir model and pseudo-second-order kinetic equation for the adsorption mechanism. Cu-BTC@C-PAN, C-PAN, and PAN beads' morphology and structure were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transforms infrared spectroscopy (FT-IR). According to the findings, Cu-BTC@C-PAN has very high adsorption capacities of 277.02, and 324.74 mg g^-1, for 4-CP and 4-NP, respectively. The Cu-BTC@C-PAN beads showed 2.55 times higher adsorption capacity than PAN in the case of 4-NP, but in the case of 4-CP, it was higher by 2.64 times.

Cellular Localization of Selected Porphyrins and Their Effect on the In Vitro Motility of Human Colon Tumors and Normal Cells

Standard therapies for colorectal cancer cannot eliminate or sufficiently reduce the metastasis process. Photodynamic therapy (PDT) may be an alternative to minimizing this problem. Here, we examined the cellular localization of selected porphyrins and determined whether free-base and manganese (III) metallated porphyrins may limit colon cancer cells' (HT29) or normal colon epithelial cells' (CCD 841 CoTr) motility in vitro. White light irradiation was used to initiate the photodynamic effect. Porphyrin uptake by the cells was determined by porphyrin fluorescence measurements through the use of confocal microscopy. Free-base porphyrin was found in cells, where it initially localized at the edge of the cytoplasm and later in the perinuclear area. The concentrations of porphyrins had no effect on cancer cell migration but had a significant effect on normal cell motility. Due to the low concentrations of porphyrins used, no changes in F-actin filaments of the cellular cytoskeleton were detected. Signal transmission via connexons between neighbouring cells was limited to a maximum of 40 µm for HT29 and 30 µm for CCD 841 CoTr cells. The tested porphyrins differed in their activity against the tumor and normal cells' migration capacity. Depending on the porphyrin used and the type of cells, their migration changed in relation to the control sample. The use of white light may change the activity of the porphyrins relative to the migratory capacity of the cells. The aim of the present study was to analyse the intracellular localization of tested porphyrins and their influence on the mobility of cells after irradiation with harmless white light.

Recent advances in Ti-based MOFs in biomedical applications

Currently, metal-organic frameworks (MOFs), basically inorganic-organic hybrid materials, have gained tremendous attention due to their vast applications. MOFs have shown enormous applications in almost every research field. However, the area of designing MOF materials for their biological applications is still an emerging field that needs attention. Titanium-based metal-organic framework (Ti-MOF) materials are used in many research areas due to their structural advantages, such as small particle size and large effective surface area. On the other hand, they have also shown unique advantages such as good biocompatibility, excellent catalytic oxidation and photocatalytic properties and ease of functionalization. This study reviews the recent research progress on Ti-MOFs in therapeutic areas such as antibacterial, oncology, anti-inflammation, and bone injury, which will provide new directions for further research in this biomedical field. Therefore, this article will help scientists working in the particular field to enhance their understanding of Ti-based MOFs for functional biomedical applications.

Size-tunable effect of CaCO3/nanocellulose hybrid composites on the removal of paracetamol from aqueous solution

Paracetamol is a ubiquitous drug used by animals and humans but is not fully metabolized within their bodies, and thus often finds its way into raw wastewater. This study represents a new class of adsorbent nanocomposite with high adsorption capacity towards paracetamol removal. Herein, both the kinetic study and the removal of paracetamol from aqueous solutions were investigated in terms of diverse CaCO₃/nanocellulose composites with different surface charges and different particle sizes. To fine-tune these parameters, the latter was hydrothermally synthesized by manipulating of three nanocelluloses types. Precisely, micro-crystalline cellulose (MCC), nano-crystalline cellulose (CNC), and nano-fibrillated cellulose (NFC) were used as templates for precipitating CaCO₃ particles from CaCl₂ solution with the aid of Na₂CO₃. Results revealed the successful in situ deposition of calcite form of CaCO₃ with size varied relying on the base of nanocellulose. For MCC, CNC, and NFC, the size of CaCO₃ was disclosed in the range of 850-1200 nm, 350-600 nm, and 150-200 nm, respectively, regarding their surface charge. While the process of paracetamol adsorption was described by Freundlich and Langmuir isotherms, it was observed that, for MCC, the best fit of the experimental data was achieved with the Freundlich model, while the Langmuir model was the most appropriate for CNC and NFC. Also, the highest max adsorption capacities of paracetamol varied respectively to both size and surface charge of hybrid composite used. Among them, MCC/CaCO₃ composite exhibited the highest max adsorption capacity at 428 mg g^-1, clarifying that the low surface zeta potential of the latter hybrid nanocomposite is responsible for the accumulation of CaCO₃ at a bigger size with a higher affinity to adsorb paracetamol with the highest capacity due to its weak repulsion. Results also demonstrated that the material is highly effective and economical for removal of paracetamol and reusability with marginal diminishing in adsorption capacity up to 10% after five reuse cycles.

Secondary Metabolites of Actinomycetales as Potent Quorum Sensing Inhibitors Targeting Gram-Positive Pathogens: In Vitro and In Silico Study

Anti-virulence agents are non-bacteriostatic and non-bactericidal emerging therapeutic options which hamper the production of virulence factors in pathogenic flora. In Staphylococcus aureus and Enterococcus faecalis, regulation of virulence genes’ expression occurs through the cyclic peptide-mediated accessory gene regulator (agr) and its ortholog fsr quorum sensing systems, respectively. In the present study, we screened a set of 54 actinomycetales secondary metabolites as novel anti-virulence compounds targeting quorum sensing system of the Gram-positive bacteria. The results indicated that four compounds, Phenalinolactones A–D, BU–4664LMe, 4,5-dehydrogeldamycin, and Questinomycin A, potentially inhibit the agr quorum sensing system and hemolytic activity of S. aureus. On the other hand, Decatromicin A and B, Okilactomycin, Rishirilide A, Abyssomicin I, and Rebeccamycin selectively blocked the fsr quorum sensing system and the gelatinase production in E. faecalis at sub-lethal concentrations. Interestingly, Synerazol uniquely showed the capability to inhibit both fsr and agr quorum sensing systems. Further, in silico molecular docking studies were performed which provided closer insights into the mode of action of these compounds and proposed that the inhibitory activity of these compounds could be attributed to their potential ability to bind to the ATP-active site of S. aureus AgrA. Taken together, our study highlights the potential of actinomycetales secondary metabolites with diverse structures as anti-virulence quorum sensing inhibitors.

Sonochemical synthesis of inorganic cryogel Ag2Mo3O10@Ag/AgO: structural characterization, antibacterial activity, and dye adsorption properties

An additive-free ultrasonic-assisted synthesis of a multi-layered Ag₂Mo₃O₁₀@Ag/AgO cryogel (SMSSO) nanocomposite has been developed, and a possible formation mechanism of multi-layered SMSSO was proposed based on characterization results of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman spectroscopy, and diffuse reflection spectroscopy (DRS). The FE-SEM images demonstrated the formation process of the multi-layered SMSSO cryogel over time under sonication, starting with the growth of Ag₂Mo₃O₁₀ nanowires, and the formation of spherical nuclei which turn into an octahedron in the presence of excess silver ions. The antibacterial activity of the synthesized cryogel and its adsorption behavior for hazardous pollutant removal were explored. The results revealed that SMSSO exhibits excellent adsorption properties, with a maximum adsorption capacity of 277.77 mg g⁻¹ and removal of 99/95% for 150 mg L⁻¹ methylene blue (MB) by 0.005 g adsorbent doses at 60 °C and pH 9. It was also confirmed that the synthesized cryogels have good antibacterial activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The selective adsorption capability of the cryogel toward cationic dye molecules and antibacterial activity makes it a competent candidate for water purification.

An ultrasonic-assisted synthesis of Ag₂Mo₃O₁₀@Ag/AgO cryogel (SMSSO) nanocomposite was developed, and a possible formation mechanism of multi-layered SMSSO was proposed based on characterization results of SEM, EDX, XRD, Raman spectroscopy, and DRS.