Solar energy conversion: From natural to artificial photosynthesis

Enhanced Interfacial Electron Transfer in Photocatalyst-Natural Enzyme Coupled Artificial Photosynthesis System: Tuning Strategies and Molecular Simulations

Laccase is capable of catalyzing a vast array of reactions, but its low redox potential limits its potential applications. The use of photocatalytic materials offers a solution to this problem by converting absorbed visible light into electrons to facilitate enzyme catalysis. Herein, MIL-53(Fe) and NH2-MIL-53(Fe) serve as both light absorbers and enzyme immobilization carriers, and laccase is employed for solar-driven chemical conversion. Electron spin resonance spectroscopy results confirm that visible light irradiation causes rapid transfer of photogenerated electrons from MOF excitation to T1 Cu(II) of laccase, significantly increasing the degradation rate constant of tetracycline (TC) from 0.0062 to 0.0127 min-1. Conversely, there is only minimal or no electron transfer between MOF and laccase in the physical mixture state. Theoretical calculations demonstrate that the immobilization of laccase's active site and its covalent binding to the metal-organic framework surface augment the coupled system's activity, reducing the active site accessible from 27.8 to 18.1 Å. The constructed photo-enzyme coupled system successfully combines enzyme catalysis' selectivity with photocatalysis's high reactivity, providing a promising solution for solar energy use.

Facile Synthesis of Organic-Inorganic Hybrid Heterojunctions of Glycolated Conjugated Polymer-TiO2-X for Efficient Photocatalytic Hydrogen Evolution

The utilization of the organic-inorganic hybrid photocatalysts for water splitting has gained significant attention due to their ability to combine the advantages of both materials and generate synergistic effects. However, they are still far from practical application due to the limited understanding of the interactions between these two components and the complexity of their preparation process. Herein, a facial approach by combining a glycolated conjugated polymer with a TiO2-X mesoporous sphere to prepare high-efficiency hybrid photocatalysts is presented. The functionalization of conjugated polymers with hydrophilic oligo (ethylene glycol) side chains can not only facilitate the dispersion of conjugated polymers in water but also promote the interaction with TiO2-X forming stable heterojunction nanoparticles. An apparent quantum yield of 53.3% at 365 nm and a hydrogen evolution rate of 35.7 mmol h-1 g-1 is achieved by the photocatalyst in the presence of Pt co-catalyst. Advanced photophysical studies based on femtosecond transient absorption spectroscopy and in situ, XPS analyses reveal the charge transfer mechanism at type II heterojunction interfaces. This work shows the promising prospect of glycolated polymers in the construction of hybrid heterojunctions for photocatalytic hydrogen production and offers a deep understanding of high photocatalytic performance by such heterojunction photocatalysts.

Review on Microreactors for Photo-Electrocatalysis Artificial Photosynthesis Regeneration of Coenzymes

In recent years, with the outbreak of the global energy crisis, renewable solar energy has become a focal point of research. However, the utilization efficiency of natural photosynthesis (NPS) is only about 1%. Inspired by NPS, artificial photosynthesis (APS) was developed and utilized in applications such as the regeneration of coenzymes. APS for coenzyme regeneration can overcome the problem of high energy consumption in comparison to electrocatalytic methods. Microreactors represent a promising technology. Compared with the conventional system, it has the advantages of a large specific surface area, the fast diffusion of small molecules, and high efficiency. Introducing microreactors can lead to more efficient, economical, and environmentally friendly coenzyme regeneration in artificial photosynthesis. This review begins with a brief introduction of APS and microreactors, and then summarizes research on traditional electrocatalytic coenzyme regeneration, as well as photocatalytic and photo-electrocatalysis coenzyme regeneration by APS, all based on microreactors, and compares them with the corresponding conventional system. Finally, it looks forward to the promising prospects of this technology.

Conformal and conductive biofilm-bridged artificial Z-scheme system for visible light-driven overall water splitting

Semi-artificial Z-scheme systems offer promising potential toward efficient solar-to-chemical conversion, yet sustainable and stable designs are currently lacking. Here, we developed a sustainable hybrid Z-scheme system capable for visible light-driven overall water splitting by integrating the durability of inorganic photocatalysts with the interfacial adhesion and regenerative property of bacterial biofilms. The Z-scheme configuration is fabricated by drop casting a mixture of photocatalysts onto a glass plate, followed by the growth of biofilms for conformal conductive paste through oxidative polymerization of pyrrole molecules. Notably, the system exhibited scalability indicated by consistent catalytic efficiency across various sheet areas, resistance observed by remarkable maintaining of photocatalytic efficiency across a range of background pressures, and high stability as evidenced by minimal decay of photocatalytic efficiency after 100-hour reaction. Our work thus provides a promising avenue toward sustainable and high-efficiency artificial photosynthesis, contributing to the broader goal of sustainable energy solutions.

g-C3N4-Based Photocatalytic Materials for Converting CO2 Into Energy: A Review

Environmental pollution management and renewable energy development are humanity's biggest issues in the 21st century. The rise in atmospheric CO2, which has surpassed 400 parts per million, has stimulated research on CO2 reduction and conversion methods. Presently, photocatalytic conversion of CO2 to valuable hydrocarbons enables the transformation of solar energy into chemical energy and offers a novel avenue for energy conversion while regulating the greenhouse effect. This is an ideal strategy for simultaneously addressing environmental issues and the energy crisis. Photocatalysts are essential to photocatalytic processes. Photocatalyst is the core of photocatalytic technology, and graphite carbon nitride (g-C3N4) has attracted much attention because of its nonmetallic characteristics, and it has the characteristics of low cost, tunable electronic structure, easy manufacture and strong reducibility. However, its activity is not only affected by external reaction conditions, but also by the band gap structure, physical and chemical stability, surface morphology and specific surface area of the photocatalyst it. In this paper, the application progress of g-C3N4-based photocatalytic materials in CO2 reduction is reviewed, and the modification strategies of g-C3N4-based catalysts to obtain better catalytic efficiency and selectivity in CO2 photocatalytic reduction are summarized, and the future development of this material is prospected.

Perovskite Nanocrystals In Situ Encapsulated in TiO2 Microspheres for Stable CO2 Photoreduction in Water

Photoreduction of carbon dioxide (CO2) into fuels presents a promising approach to mitigate global warming and energy crises. Halide perovskite nanocrystals (NCs) with prominent optoelectronic properties have triggered substantial attention as photocatalysts but are limited by the charge recombination and instability. Here, we develop stable CsPbBr3/titania microspheres (TMs) by in situ growth of CsPbBr3 NCs inside mesoporous TMs through solid-state sintering, which significantly improves the stability of perovskite NCs, making them applicable in water with efficient CO2 photoreduction performance. Notably, the CsPbBr3/TMs demonstrates a 6.73- and 9.23-fold increase in the rate of CH4 production compared to TMs and CsPbBr3, respectively. The internal electric field facilitates S-scheme charge transfer, enhancing the separation of electron-hole pairs, as evidenced by X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, which is pivotal for the selective photoreduction of CO2. These insights pave the way for the design of CsPbBr3-based photocatalysts with superior efficiency and stability.

Identification, Characterization, and Electronic Structures of Interconvertible Cobalt-Oxygen TAML Intermediates

The reaction of Li[(TAML)CoIII]·3H2O (TAML = tetraamido macrocyclic tetraanionic ligand) with iodosylbenzene at 253 K in acetone in the presence of redox-innocent metal ions (Sc(OTf)3 and Y(OTf)3) or triflic acid affords a blue species 1, which is converted reversibly to a green species 2 upon cooling to 193 K. The electronic structures of 1 and 2 have been determined by combining advanced spectroscopic techniques (X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), X-ray absorption spectroscopy/extended X-ray absorption fine structure (XAS/EXAFS), and magnetic circular dichroism (MCD)) with ab initio theoretical studies. Complex 1 is best represented as an S = 1/2 [(Sol)(TAML•+)CoIII---OH(LA)]- species (LA = Lewis/Brønsted acid and Sol = solvent), where an S = 1 Co(III) center is antiferromagnetically coupled to S = 1/2 TAML•+, which represents a one-electron oxidized TAML ligand. In contrast, complex 2, also with an S = 1/2 ground state, is found to be multiconfigurational with contributions of both the resonance forms [(H-TAML)CoIV═O(LA)]- and [(H-TAML•+)CoIII═O(LA)]-; H-TAML and H-TAML•+ represent the protonated forms of TAML and TAML•+ ligands, respectively. Thus, the interconversion of 1 and 2 is associated with a LA-associated tautomerization event, whereby H+ shifts from the terminal -OH group to TAML•+ with the concomitant formation of a terminal cobalt-oxo species possessing both singlet (SCo = 0) Co(III) and doublet (SCo = 1/2) Co(IV) characters. The reactivities of 1 and 2 at different temperatures have been investigated in oxygen atom transfer (OAT) and hydrogen atom transfer (HAT) reactions to compare the activation enthalpies and entropies of 1 and 2.

Exploring the effect of a pendent amine group poised over the secondary coordination sphere of a cobalt complex on the electrocatalytic hydrogen evolution reaction

A CoIII complex (2) of a bispyridine-dioxime ligand (H2LNMe2) containing a tertiary amine group in the proximity of the Co center is synthesized and characterized. One of the oxime protons of the ligand is deprotonated, and the amine group remains protonated in the solid-state structure of the CoII complex (2a). The acid-base properties of 2 showed pKa values of 5.9, 8.4, and 9.6, which are assigned to the dissociation of two consecutive oxime protons and amine protons, respectively. The electrocatalytic proton reduction of 2 was investigated in an aqueous phosphate buffer solution (PBS), revealing a catalytic hydrogen evolution reaction (HER) at an Ecat/2 of -1.01 V vs. the SHE, with an overpotential of 673 mV and a kobs value of 2.6 × 103 s-1 at pH 7. For comparison, the HER of the Co complex (1) lacking the tert-amine group at the secondary sphere was investigated in PBS, which showed a kobs of 1.3 × 103 s-1 and an overpotential of 577 mV. At pH 4, however, 2 revealed a ∼3 times higher kobs value than 1, which suggests that the protonated amine group likely works as a proton relay site. Notably, no significant change in the reaction rate was observed at different pH values for 1, implying that oxime protons may not be involved in the intramolecular proton-coupled electron transfer reaction in the HER. The kobs values for Co complexes at pH 7.0 are significantly higher than those of the [Co(dmgH)2(pyridine)(Cl)] complex, implying that the primary coordination sphere around 1 or 2 enhances the HER and offers better catalyst stability in acidic buffer solutions.

Efficient two-step excitation energy transfer in artificial light-harvesting antenna based on bacteriochlorophyll aggregates

Chlorosomes of green photosynthetic bacteria are large light-harvesting complexes enabling these organisms to survive at extremely low-light conditions. Bacteriochlorophylls found in chlorosomes self-organize and are ideal candidates for use in biomimetic light-harvesting in artificial photosynthesis and other applications for solar energy utilization. Here we report on the construction and characterization of an artificial antenna consisting of bacteriochlorophyll c co-aggregated with β-carotene, which is used to extend the light-harvesting spectral range, and bacteriochlorophyll a, which acts as a final acceptor for excitation energy. Efficient energy transfer between all three components was observed by means of fluorescence spectroscopy. The efficiency varies with the β-carotene content, which increases the average distance between the donor and acceptor in both energy transfer steps. The efficiency ranges from 89 to 37% for the transfer from β-carotene to bacteriochlorophyll c, and from 93 to 69% for the bacteriochlorophyll c to bacteriochlorophyll a step. A significant part of this study was dedicated to a development of methods for determination of energy transfer efficiency. These methods may be applied also for study of chlorosomes and other pigment complexes.

Nanosized tubular clay minerals as inorganic nanoreactors for energy and environmental applications: A review to fill current knowledge gaps

Modern society pays further and further attention to environmental protection and the promotion of sustainable energy solutions. Heterogeneous photocatalysis is widely recognized as one of the most economically viable and ecologically sound technologies to combat environmental pollution and the global energy crisis. One challenge is finding a suitable photocatalytic material for an efficient process. Inorganic nanotubes have garnered attention as potential candidates due to their optoelectronic properties, which differ from their bulk equivalents. Among them, clay nanotubes (halloysite, imogolite, and chrysotile) are attracting renewed interest for photocatalysis applications thanks to their low production costs, their unique physical and chemical properties, and the possibility to functionalize or dope their structure to enhance charge-carriers separation into their structure. In this review, we provide new insights into the potential of these inorganic nanotubes in photocatalysis. We first discuss the structural and morphological features of clay nanotubes. Applications of photocatalysts based on clay nanotubes across a range of photocatalytic reactions, including the decomposition of organic pollutants, elimination of NOx, production of hydrogen, and disinfection of bacteria, are discussed. Finally, we highlight the obstacles and outline potential avenues for advancing the current photocatalytic system based on clay nanotubes. Our aim is that this review can offer researchers new opportunities to advance further research in the field of clay nanotubes-based photocatalysis with other vital applications in the future.

Dye-Sensitized Photocatalysis: Hydrogen Evolution and Alcohol-to-Aldehyde Oxidation without Sacrifical Electron Donor

There is a growing interest in developing dye-sensitized photocatalytic systems (DSPs) to produce molecular hydrogen (H2 ) as alternative energy source. To improve the sustainability of this technology, we replaced the sacrificial electron donor (SED), typically an expensive and polluting chemical, with an alcohol oxidation catalyst. This study demonstrates the first dye-sensitized system using a diketopyrrolopyrrole dye covalently linked to 2,2,6,6-tetramethyl-1-piperidine-N-oxyl (TEMPO) based catalyst for simultaneous H2 evolution and alcohol-to-aldehyde transformation operating in water with visible irradiation.

Current advances in modulating tumor hypoxia for enhanced therapeutic efficacy

Hypoxia is a common feature of most solid tumors, which promotes the proliferation, invasion, metastasis, and therapeutic resistance of tumors. Researchers have been developing advanced strategies and nanoplatforms to modulate tumor hypoxia to enhance therapeutic effects. A timely review of this rapidly developing research topic is therefore highly desirable. For this purpose, this review first introduces the impact of hypoxia on tumor development and therapeutic resistance in detail. Current developments in the construction of various nanoplatforms to enhance tumor treatment in response to hypoxia are also systematically summarized, including hypoxia-overcoming, hypoxia-exploiting, and hypoxia-disregarding strategies. We provide a detailed discussion of the rationale and research progress of these strategies. Through a review of current trends, it is hoped that this comprehensive overview can provide new prospects for clinical application in tumor treatment. STATEMENT OF SIGNIFICANCE: As a common feature of most solid tumors, hypoxia significantly promotes tumor progression. Advanced nanoplatforms have been developed to modulate tumor hypoxia to enhanced therapeutic effects. In this review, we first introduce the impact of hypoxia on tumor progression. Current developments in the construction of various nanoplatforms to enhance tumor treatment in response to hypoxia are systematically summarized, including hypoxia-overcoming, hypoxia-exploiting, and hypoxia-disregarding strategies. We discuss the rationale and research progress of the above strategies in detail, and finally introduce future challenges for treatment of hypoxic tumors. By reviewing the current trends, this comprehensive overview can provide new prospects for clinical translatable tumor therapy.

Copper Modulated Lead-Free Cs4 MnSb2 Cl12 Double Perovskite Microcrystals for Photocatalytic Reduction of CO2

In order to deal with the global energy crisis and environmental problems, reducing carbon dioxide through artificial photosynthesis has become a hot topic. Lead halide perovskite is attracted people's attention because of its excellent photoelectric properties, but the toxicity and long-term instability prompt people to search for new photocatalysts. Herein, a series of <111> inorganic double perovskites Cs4 Mn1-x Cux Sb2 Cl12 microcrystals (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) are synthesized and characterized. Among them, Cs4 Mn0.7 Cu0.3 Sb2 Cl12 microcrystals have the best photocatalytic performance, and the yields of CO and CH4 are 503.86 and 68.35 µmol g-1 , respectively, after 3 h irradiation, which are the highest among pure phase perovskites reported so far. In addition, in situ Fourier transform infrared (FT-IR) spectroscopy and electron spin resonance (ESR) spectroscopy are used to explore the mechanism of the photocatalytic reaction. The results highlight the potential of this class of materials for photocatalytic reduction reactions.

All-inorganic lead halide perovskites for photocatalysis: a review

Nowadays, environmental pollution and the energy crisis are two significant concerns in the world, and photocatalysis is seen as a key solution to these issues. All-inorganic lead halide perovskites have been extensively utilized in photocatalysis and have become one of the most promising materials in recent years. The superior performance of all-inorganic lead halide perovskites distinguish them from other photocatalysts. Since pure lead halide perovskites typically have shortcomings, such as low stability, poor active sites, and ineffective carrier extraction, that restrict their use in photocatalytic reactions, it is crucial to enhance their photocatalytic activity and stability. Huge progress has been made to deal with these critical issues to enhance the effects of all-inorganic lead halide perovskites as efficient photocatalysts in a wide range of applications. In this manuscript, the synthesis methods of all-inorganic lead halide perovskites are discussed, and promising strategies are proposed for superior photocatalytic performance. Moreover, the research progress of photocatalysis applications are summarized; finally, the issues of all-inorganic lead halide perovskite photocatalytic materials at the current state and future research directions are also analyzed and discussed. We hope that this manuscript will provide novel insights to researchers to further promote the research on photocatalysis based on all-inorganic lead halide perovskites.

Exploiting the photophysical features of DMAN template in ITQ-51 zeotype in the search for FRET energy transfer

The combination between photoactive molecules and inorganic structures is of great interest for the development of advanced materials in the field of optics. Particularly, zeotypes with extra-large pore size are attractive because they allow the encapsulation of bulky dyes. The microporous aluminophoshate Mg-ITQ-51 (IFO-type structure) represents an ideal candidate because of the synergic combination of two crucial features: the IFO framework itself, which is composed of non-interconnected one-dimensional extra-large elliptical channels with a diameter up to 11 Å able to host bulky guest species, and the particular organic structure-directing agent used for the synthesis (1,8-bis(dimethylamino)naphthalene, DMAN), which efficiently fills the IFO pores, and is itself a photoactive molecule with interesting fluorescence properties in the blue range of the visible spectrum, thus providing a densely-incorporated donor species for FRET processes. Besides, occlusion of DMAN dye in the framework triggers a notable improvement of its fluorescence properties by confinement effect. To extend the action of the material and to mimic processes such as photosynthesis in which FRET is essential, two robust laser dyes with bulky size, rhodamine 123 and Nile Blue, have been encapsulated for the first time in a zeolitic framework, together with DMAN, in a straightforward one-pot synthesis. Thus, photoactive systems with emission in the entire visible range have been achieved due to a partial FRET between organic chromophores protected in a rigid aluminophosphate matrix.

Advances and opportunities in Group 15 porphyrin chemistry

The chemistry of Group 15 porphyrins has been established relatively well among the main-group porphyrins. Thus far phosphorus(III), phosphorus(V), arsenic(III), arsenic(V), antimony(III), antimony(V), and bismuth(III) porphyrins have been reported. Their unique axial-bonding ability, rich redox, and optical properties offer an advantage over other main-group or transition metal porphyrins. They could be excellent candidates for a variety of applications such as solar energy harvesting, molecular electronics, molecular catalysis, and biomedical applications. Despite these unique properties, the Group 15 porphyrins are not exploited at their fullest capacity. Recently, there has been some interest, where the richness of Group 15 porphyrin chemistry was explored for some of the above applications. In this context, this article summarizes recent advances in Group 15 porphyrin chemistry and attempts to unravel the tremendous opportunities of these remarkable porphyrins.

Photochemical charge accumulation in a heteroleptic copper(i)-anthraquinone molecular dyad via proton-coupled electron transfer

Developing efficient photocatalysts that perform multi electron redox reactions is critical to achieving solar energy conversion. One can reach this goal by developing systems which mimic natural photosynthesis and exploit strategies such as proton-coupled electron transfer (PCET) to achieve photochemical charge accumulation. We report herein a heteroleptic Cu(i)bis(phenanthroline) complex, Cu-AnQ, featuring a fused phenazine-anthraquinone moiety that photochemically accumulates two electrons in the anthraquinone unit via PCET. Full spectroscopic and electrochemical analyses allowed us to identify the reduced species and revealed that up to three electrons can be accumulated in the phenazine-anthraquinone ring system under electrochemical conditions. Continuous photolysis of Cu-AnQ in the presence of sacrificial electron donor produced doubly reduced monoprotonated photoproduct confirmed unambiguously by X-ray crystallography. Formation of this photoproduct indicates that a PCET process occurred during illumination and two electrons were accumulated in the system. The role of the heteroleptic Cu(i)bis(phenanthroline) moiety participating in the photochemical charge accumulation as a light absorber was evidenced by comparing the photolysis of Cu-AnQ and the free AnQ ligand with less reductive triethylamine as a sacrificial electron donor, in which photogenerated doubly reduced species was observed with Cu-AnQ, but not with the free ligand. The thermodynamic properties of Cu-AnQ were examined by DFT which mapped the probable reaction pathway for photochemical charge accumulation and the capacity for solar energy stored in the process. This study presents a unique system built on earth-abundant transition metal complex to store electrons, and tune the storage of solar energy by the degree of protonation of the electron acceptor.

Experimental and computational characterisation of an artificial light harvesting complex

Photosynthesis has been shown to be a highly efficient process for energy transfer in plants and bacteria. Like natural photosynthetic systems, the artificial light harvesting complex (LHC) BODIPY pillar[5]arene exhibits Förster resonance energy transfer (FRET). However, extensive characterisation of the BODIPY pillar[5]arene LHC to determine its suitability as an artificial LHC has yet to occur. In this paper we experimentally and computationally investigate the photophysical properties of the LHC by comparing the light absorption of the BODIPY LHC to individual BODIPY chromophores. Our results show evidence for quantum coherence, with oscillation frequencies of 100 cm^-1 and 600 cm^-1, which are attributable to vibronic, or exciton-phonon type coupling. Computational analysis suggests strong couplings of the molecular orbitals of the LHC resulting from the stacking of neighbouring BODIPY chromophore units. Interestingly, we find a 40% reduction in the absorbance of light for the BODIPY LHC compared to the individual chromophores which we attribute to electronic interactions between the conjugated π-systems of the BODIPY chromophores and the pillar[5]arene backbone.

Axial vs equatorial: Capturing the intramolecular charge transfer state geometry in conformational polymorphic crystals of a donor-bridge-acceptor dyad in nanosecond-time-scale

Two conformational polymorphs of a donor-bridge-acceptor (D-B-A) dyad, p-(CH3)2N-C6H4-(CH2)2-(1-pyrenyl)/PyCHDMA, were studied, where the electron donor (D) moiety p-(CH3)2N-C6H4/DMA is connected through a bridging group (B), -CH2-CH2-, to the electron acceptor (A) moiety pyrene. Though molecular dyads like PyCHDMA have the potential to change solar energy into electrical current through the process of photoinduced intramolecular charge transfer (ICT), the major challenge is the real-time investigation of the photoinduced ICT process in crystals, necessary to design solid-state optoelectronic materials. The time-correlated single photon counting (TCSPC) measurements with the single crystals showed that the ICT state lifetime of the thermodynamic form, PyCHDMA1 (pyrene and DMA: axial), is ∼3 ns, whereas, for the kinetic form, PyCHDMA20 (pyrene and DMA: equatorial), it is ∼7 ns, while photoexcited with 375 nm radiation. The polymorphic crystals were photo-excited and subsequently probed with a pink Laue x-ray beam in time-resolved x-ray diffraction (TRXRD) measurements. The TRXRD results suggest that in the ICT state, due to electron transfer from the tertiary N-atom in DMA moiety to the bridging group and pyrene moiety, a decreased repulsion between the lone-pair and the bond-pair at N-atom induces planarity in the C-N-(CH3)2 moiety, in both polymorphs. The Natural Bond Orbital calculations and partial atomic charge analysis by Hirshfeld partitioning also corroborated the same. Although the interfragment charge transfer (IFCT) analysis using the TDDFT results showed that for the charge transfer excitation in both conformers, the electrons were transferred from the DMA moiety to mostly the pyrene moiety, the bridging group has little role to play in that.

Chemistry must respond to the crisis of transgression of planetary boundaries

Recent assessments alarmingly indicate that many of the world's leading chemicals are transgressing one or more of the nine planetary boundaries, which define safe operating spaces within which humanity can continue to develop and thrive for generations to come. The unfolding crisis cannot be ignored and there is a once-in-a-century opportunity for chemistry - the science of transformation of matter - to make a critical difference to the future of people and planet. How can chemists contribute to meeting these challenges and restore stability and strengthen resilience to the planetary system that humanity needs for its survival? To respond to the wake-up call, three crucial steps are outlined: (1) urgently working to understand the nature of the looming threats, from a chemistry perspective; (2) harnessing the ingenuity and innovation that are central to the practice of chemistry to develop sustainable solutions; and (3) transforming chemistry itself, in education, research and industry, to re-position it as 'chemistry for sustainability' and lead the stewardship of the world's chemical resources. This will require conservation of material stocks in forms that remain available for use, through attention to circularity, as well as strengthening engagement in systems-based approaches to designing chemistry research and processes informed by convergent working with many other disciplines.

Bioinspired Artificial Ion Pumps

Ion pumps are important membrane-spanning transporters that pump ions against the electrochemical gradient across the cell membrane. In biological systems, ion pumping is essential to maintain intracellular osmotic pressure, to respond to external stimuli, and to regulate physiological activities by consuming adenosine triphosphate. In recent decades, artificial ion pumping systems with diverse geometric structures and functions have been developing rapidly with the progress of advanced materials and nanotechnology. In this Review, bioinspired artificial ion pumps, including four categories: asymmetric structure-driven ion pumps, pH gradient-driven ion pumps, light-driven ion pumps, and electron-driven ion pumps, are summarized. The working mechanisms, functions, and applications of those artificial ion pumping systems are discussed. Finally, a brief conclusion of underpinning challenges and outlook for future research are tentatively discussed.

Recent Advances in Marine Microalgae Production: Highlighting Human Health Products from Microalgae in View of the Coronavirus Pandemic (COVID-19)

Blue biotechnology can greatly help solve some of the most serious social problems due to its wide biodiversity, which includes marine environments. Microalgae are important resources for human needs as an alternative to terrestrial plants because of their rich biodiversity, rapid growth, and product contributions in many fields. The production scheme for microalgae biomass mainly consists of two processes: (I) the Build-Up process and (II) the Pull-Down process. The Build-Up process consists of (1) the super strain concept and (2) cultivation aspects. The Pull-Down process includes (1) harvesting and (2) drying algal biomass. In some cases, such as the manufacture of algal products, the (3) extraction of bioactive compounds is included. Microalgae have a wide range of commercial applications, such as in aquaculture, biofertilizer, bioenergy, pharmaceuticals, and functional foods, which have several industrial and academic applications around the world. The efficiency and success of biomedical products derived from microalgal biomass or its metabolites mainly depend on the technologies used in the cultivation, harvesting, drying, and extraction of microalgae bioactive molecules. The current review focuses on recent advanced technologies that enhance microalgae biomass within microalgae production schemes. Moreover, the current work highlights marine drugs and human health products derived from microalgae that can improve human immunity and reduce viral activities, especially COVID-19.

Heusler alloy catalysts for electrochemical CO2 reduction

Developing efficient catalysts for electrochemical CO2 reduction reaction (ECO2RR) to hydrocarbons is becoming increasingly important but still challenging due to their high overpotential and poor selectivity. Here, the famous Heusler alloys are investigated as ECO2RR catalysts for the first time by means of density functional theory calculations. The linear scaling relationship between the adsorption energies of CHO (and COOH) and CO intermediates is broken and, thus, the overpotential can be tuned regularly by chemically permuting different 3 d, 4 d, or 5 d transition metals (TMs) in Heusler alloy Cu2TMAl. Cu2ZnAl shows the best activity among all the 30 Heusler alloys considered in the present study, with 41% improvement in energy efficiency compared to pure Cu electrode. Cu2PdAl, Cu2AgAl, Cu2PtAl, and Cu2AuAl are also good candidates. The calculations on the competition between hydrogen evolution reaction and CO2RR indicate that Cu2ZnAl is also the one having the best selectivity toward hydrocarbons. This work identifies the possibility of applying the Heusler alloy as an efficient ECO2RR catalyst. Since thousands of Heusler alloys have been found in experiments, the present study also encourages the search for more promising candidates in this broad research area.

Artificial photosynthesis systems for solar energy conversion and storage: platforms and their realities

In natural photosynthesis, photosynthetic organisms such as green plants realize efficient solar energy conversion and storage by integrating photosynthetic components on the thylakoid membrane of chloroplasts. Inspired by natural photosynthesis, researchers have developed many artificial photosynthesis systems (APS's) that integrate various photocatalysts and biocatalysts to convert and store solar energy in the fields of resource, environment, food, and energy. To improve the system efficiency and reduce the operation cost, reaction platforms are introduced in APS's since they allow for great stability and continuous processing. A systematic understanding of how a reaction platform affects the performance of artificial photosynthesis is conducive for designing an APS with superb solar energy utilization. In this review, we discuss the recent APS's researches, especially those confined on/in platforms. The importance of different platforms and their influences on APS's performance are emphasized. Generally, confined platforms can enhance the stability and repeatability of both photocatalysts and biocatalysts in APS's as well as improve the photosynthetic performance due to the proximity effect. For functional platforms that can participate in the artificial photosynthesis reactions as active parts, a high integration of APS's components on/in these platforms can lead to efficient electron transfer, enhanced light-harvesting, or synergistic catalysis, resulting in superior photosynthesis performance. Therefore, the integration of APS's components is beneficial for the transfer of substrates and photoexcited electrons in artificial photosynthesis. We finally summarize the current challenges of APS's development and further efforts on the improvement of APS's.

Mimicking the Oxygen-Evolving Center in Photosynthesis

The oxygen-evolving center (OEC) in photosystem II (PSII) of oxygenic photosynthetic organisms is a unique heterometallic-oxide Mn₄CaO₅-cluster that catalyzes water splitting into electrons, protons, and molecular oxygen through a five-state cycle (S_n, n = 0 ~ 4). It serves as the blueprint for the developing of the man-made water-splitting catalysts to generate solar fuel in artificial photosynthesis. Understanding the structure-function relationship of this natural catalyst is a great challenge and a long-standing issue, which is severely restricted by the lack of a precise chemical model for this heterometallic-oxide cluster. However, it is a great challenge for chemists to precisely mimic the OEC in a laboratory. Recently, significant advances have been achieved and a series of artificial Mn₄XO₄-clusters (X = Ca/Y/Gd) have been reported, which closely mimic both the geometric structure and the electronic structure, as well as the redox property of the OEC. These new advances provide a structurally well-defined molecular platform to study the structure-function relationship of the OEC and shed new light on the design of efficient catalysts for the water-splitting reaction in artificial photosynthesis.

Photocatalytic CO2 Reduction Using TiO2-Based Photocatalysts and TiO2 Z-Scheme Heterojunction Composites: A Review

Photocatalytic CO₂ reduction is a most promising technique to capture CO₂ and reduce it to non-fossil fuel and other valuable compounds. Today, we are facing serious environmental issues due to the usage of excessive amounts of non-renewable energy resources. In this aspect, photocatalytic CO₂ reduction will provide us with energy-enriched compounds and help to keep our environment clean and healthy. For this purpose, various photocatalysts have been designed to obtain selective products and improve efficiency of the system. Semiconductor materials have received great attention and have showed good performances for CO₂ reduction. Titanium dioxide has been widely explored as a photocatalyst for CO₂ reduction among the semiconductors due to its suitable electronic/optical properties, availability at low cost, thermal stability, low toxicity, and high photoactivity. Inspired by natural photosynthesis, the artificial Z-scheme of photocatalyst is constructed to provide an easy method to enhance efficiency of CO₂ reduction. This review covers literature in this field, particularly the studies about the photocatalytic system, TiO₂ Z-scheme heterojunction composites, and use of transition metals for CO₂ photoreduction. Lastly, challenges and opportunities are described to open a new era in engineering and attain good performances with semiconductor materials for photocatalytic CO₂ reduction.

Carbon Dioxide Conversion Synergistically Activated by Dielectric Barrier Discharge Plasma and the CsPbBr3@TiO2 Photocatalyst

Carbon dioxide utilization activated by the integration of plasma and photocatalyst is a promising approach to achieve the mitigation of the greenhouse effect. In this paper, for the first time, the dielectric barrier discharge (DBD) plasma and halide perovskite photocatalysts were synergistically used to facilitate the carbon dioxide conversion. After introducing the photocatalyst into the plasma reactor, the plasma discharge characteristics were improved by the photocatalyst while the active photons, electrons, and vibrationally excited molecules in plasma also enhanced the photocatalytic activity of the photocatalyst. Compared with pure CsPbBr₃ and Al₂O₃, the CsPbBr₃@TiO₂ with the best photocatalytic activity also exhibited the best performance in plasma. The carbon dioxide conversion rate of the DBD plasma filled with CsPbBr₃@TiO₂ was found to be 29.6% higher than the sum of sole plasma and photocatalysis, illustrating the achievement of the synergistic effect between the plasma and photocatalyst. This work brings up new opportunities for efficient large-scale conversion and utilization of carbon dioxide by the coupling of nonthermal plasma and photocatalysis.

Porous organic polymers for light-driven organic transformations

As a new generation of porous materials, porous organic polymers (POPs), have recently emerged as a powerful platform of heterogeneous photocatalysis. POPs are constructed using extensive organic synthesis methodologies, with various functional organic units being connected via high-energy covalent bonds. This review systematically presents the recent advances in POPs for visible-light driven organic transformations. Herein, we firstly summarize the common construction strategies for POP-based photocatalysts based on two major approaches: pre-design and post-modification; secondly, we categorize and summarize the synthesis methods and organic reaction types for constructing various types of POPs. We then classify and introduce the specific reactions of current light-driven POP-mediated organic transformations. Finally, we outline the current state of development and the problems faced in light-driven organic transformations by POPs, and we present some perspectives to motivate the reader to explore solutions to these problems and confront the present challenges in the development process.

Dendronized Porphyrins: Molecular Design and Synthesis

Abstract:

In this review, we report different methods and strategies to synthesize flexible and rigid dendronized porphyrins. We will focus on porphyrin dendrimers that have been reported in the last 10 years. Particularly, in our research group, we have designed and synthesized different series of dendronized porphyrins (free base and metallated) with pyrene units at the periphery and Fréchet-type dendritic arms. The Lindsey methodology has allowed the synthesis of meso-substituted porphyrins with various substitution patterns, such as symmetric, dissymmetric, or unsymmetric. Porphyrin dendrimers have been prepared by different synthetic methodologies; one of the most reported being the convergent method, where the dendrons are first prepared and further linked to a meso-substituted functionalized porphyrin unit, which will constitute the core of the dendrimer. Another interesting synthetic approach is the use of a reactive dendron bearing a terminal aldehyde functional group to form the final porphyrin core. In this way, a two-armed dendronized dissymmetric porphyrin core can be prepared from a dendritic precursor and a dipyrromethene derivative. This strategy is very convenient to prepare low-generation dendritic porphyrins. The divergent approach is another well-known methodology for porphyrin dendrimer synthesis, mostly used for the obtainment of high-generation dendrimers. Click chemistry reaction has been advantageous for the development of more complex porphyrin dendritic structures. This reaction presents important advantages, such as high yields and mild reaction conditions which permit the assembly of different multiporphyrin dendritic structures. In the constructs presented in this review, the emission of the porphyrin moiety has been observed, leading to potential applications in artificial photosynthesis, sensing, nanomedicine, and biological sciences.

Dangling Carboxylic Group That Participates in O-O Bond Formation Reaction to Promote Water Oxidation Catalyzed by a Ruthenium Complex: Experimental Evidence of an Oxide Relay Pathway

Two mononuclear ruthenium(II) complexes of the types [Ru(trpy)(HL¹)(OH₂)]²⁺ (1^Aq) and [Ru(trpy)(L²-κ-N²O)] (2) [where trpy = 2,2':6',2″-terpyridine, HL¹ = 2-(2-pyridyl)benzimidazole, H₂L² = 2-(pyridin-2-yl)-1H-benzo[d]imidazole-4-carboxylic acid] have been synthesized and thoroughly characterized by analytical and spectroscopic [UV-vis, NMR, high-resolution mass spectrometry, and IR] techniques. Complex 1^Aq has been further characterized by X-ray crystallography. In an acidic aqueous medium (pH 1), complex 2 undergoes carboxylate/water exchange readily to form an aqua-ligated complex, [Ru(trpy)(H₂L²-κ-N²)(OH₂)]²⁺ (2^Aq), having a dangling carboxylic group. This exchange phenomenon has been followed by IR, ¹H NMR, and UV-vis spectroscopic techniques. Electrochemical analyses of 1^Aq and 2^Aq (Pourbaix diagram) suggest the generation of a formal Ru^V═O species that can potentially promote the oxidation of water. A comparative study of the water oxidation activity catalyzed by 1^Aq and 2^Aq is reported here to see the effect of a dangling carboxylic group in the catalytic performance. Complex 2^Aq shows an enormously higher rate of reaction than 1^Aq. The pendant carboxylic group in 2^Aq participates in an intramolecular O-O bond formation reaction with the reactive formal Ru^V═O unit to form a percarboxylate intermediate and provides an electron-deficient carbon center where water nucleophilic attack takes place. The isotope labeling experiment using ¹⁸O-labeled water verifies the attack of water at the carbon center of the carboxylic group rather than a direct attack at the oxo of the formal Ru^V═O unit. The present work provides experimental evidence of the uncommon functionality of the carboxylic group, the oxide relay, in molecular water oxidation chemistry.

Synthesis of highly efficient selenium oxide hybridized g-C3N4 photocatalyst for NADH/NADPH regeneration to facilitate solar-to-chemical reaction

An inexpensive graphitic carbon nitrite (g-C3N4) photocatalyst was hybridized with selenium oxide (SeO2) photocatalyst by a monolayer-dispersed technique. After hybridization of g-C3N4 with SeO2, the NADH/NADPH regeneration efficiency of SeO2 photocatalyst was enhanced under solar light illumination was observed. The photocatalytic activity of SeO2/g-C3N4 photocatalyst under solar light illumination was enhanced by 3-fold higher than g-C3N4 photocatalyst, the solar light photocatalytic activity was produced and the photo-decomposition of SeO2 photocatalyst was completely stifled after hybridized SeO2 photocatalyst by g-C3N4 photocatalyst. The improvement in performance and photo-decomposition inhibition under solar light illumination was persuaded by efficiency separation of photo-persuaded holes from SeO2 to the valence bond (V.B.)/highest occupied molecular orbital (HOMO) of g-C3N4 under solar light illumination, the electron jumped from the V.B. to the conduction band (C.B.)/lowest unoccupied molecular orbital (LUMO) of g-C3N4 could directly insert into the C.B. of SeO2 photocatalyst, synthesized SeO2/g-C3N4 photocatalyst is highly active for NADH/NADPH regeneration under solar light.

Molecular Photocatalytic Water Splitting by Mimicking Photosystems I and II

In nature, water is oxidized by plastoquinone to evolve O₂ and form plastoquinol in Photosystem II (PSII), whereas NADP⁺ is reduced by plastoquinol to produce NADPH and regenerate plastoquinone in Photosystem I (PSI), using homogeneous molecular photocatalysts. However, water splitting to evolve H₂ and O₂ in a 2:1 stoichiometric ratio has yet to be achieved using homogeneous molecular photocatalysts, remaining as one of the biggest challenges in science. Herein, we demonstrate overall water splitting to evolve H₂ and O₂ in a 2:1 ratio using a two liquid membranes system composed of two toluene phases, which are separated by a solvent mixture of water and trifluoroethanol (H₂O/TFE, 3:1 v/v), with a glass membrane to combine PSI and PSII molecular models. A PSII model contains plastoquinone analogs [p-benzoquinone derivatives (X-Q)] in toluene and an iron(II) complex as a molecular oxidation catalyst in H₂O/TFE (3:1 v/v), which evolves a stoichiometric amount of O₂ and forms plastoquinol analogs (X-QH₂) under photoirradiation. On the other hand, a PSI model contains nothing in toluene but contains X-QH₂, 9-mesityl-10-methylacridinium ion (Acr⁺-Mes) as a photocatalyst, and a cobalt(III) complex as an H₂ evolution catalyst in H₂O/TFE (3:1 v/v), which evolves a stoichiometric amount of H₂ and forms X-Q under photoirradiation. When a PSII model system is combined with a PSI model system with two glass membranes and two liquid membranes, photocatalytic water splitting with homogeneous molecular photocatalysts is achieved to evolve hydrogen and oxygen with the turnover number (TON) of >100.

Microfluidic artificial photosynthetic system for continuous NADH regeneration and l-glutamate synthesis

Artificial photosynthesis coenzyme regeneration and photoenzymatic synthesis of l-glutamate by glutamate dehydrogenase.

Bridge-Length- and Solvent-Dependent Charge Separation and Recombination Processes in Donor-Bridge-Acceptor Molecules

The photoinduced intramolecular charge separation (CS) and charge recombination (CR) phenomena in a series of donor-bridge-acceptor (D-B-A) molecules are intensively investigated as a means of understanding electron transport through the π-B. Pyrene (Pyr) and triarylamine (TAA) moieties connected via phenylene Bs of various lengths are studied because their CS and CR behaviors can be readily monitored in real time by femtosecond transient absorption (fs-TA) spectroscopy. By combining the steady-state and fs-TA spectroscopic measurements in a variety of solvents together with chemical calculations, the parameters that govern the CS behaviors of these dyads were obtained, such as the solvent effects on free energy and the B-length-dependent electronic coupling (V_DA) between D and A. We observed the sharp switch of the CS behavior with the increase of the solvent polarity and B-linker lengths. Furthermore, in the case of the shortest distance between D and A when the electron coupling is sufficiently large, we observed that the CS phenomenon occurs even in low-polar solvents. Upon increasing the length of B, CS occurs only in strong polar solvents. The distance-dependent decay constant of the CS rate is determined as ∼0.53 Å^-1, indicating that CS is governed by superexchange tunneling interactions. The CS rate constants are also approximately estimated using Marcus electron transfer theory, and the results imply that the V_DA value is the key factor dominating the CS rate, while the facile rotation of the phenylene B is important for modulating the lifetime of the charge-separated state in these D-B-A dyads. These results shed light on the practical strategy for obtaining a high CS efficiency with a long-lived CS state in TAA-B-Pyr derivatives.

Dynamics of photoconversion processes: the energetic cost of lifetime gain in photosynthetic and photovoltaic systems

The continued development of solar energy conversion technologies relies on an improved understanding of their limitations. In this review, we focus on a comparison of the charge carrier dynamics underlying the function of photovoltaic devices with those of both natural and artificial photosynthetic systems. The solar energy conversion efficiency is determined by the product of the rate of generation of high energy species (charges for solar cells, chemical fuels for photosynthesis) and the energy contained in these species. It is known that the underlying kinetics of the photophysical and charge transfer processes affect the production yield of high energy species. Comparatively little attention has been paid to how these kinetics are linked to the energy contained in the high energy species or the energy lost in driving the forward reactions. Here we review the operational parameters of both photovoltaic and photosynthetic systems to highlight the energy cost of extending the lifetime of charge carriers to levels that enable function. We show a strong correlation between the energy lost within the device and the necessary lifetime gain, even when considering natural photosynthesis alongside artificial systems. From consideration of experimental data across all these systems, the emprical energetic cost of each 10-fold increase in lifetime is 87 meV. This energetic cost of lifetime gain is approx. 50% greater than the 59 meV predicted from a simple kinetic model. Broadly speaking, photovoltaic devices show smaller energy losses compared to photosynthetic devices due to the smaller lifetime gains needed. This is because of faster charge extraction processes in photovoltaic devices compared to the complex multi-electron, multi-proton redox reactions that produce fuels in photosynthetic devices. The result is that in photosynthetic systems, larger energetic costs are paid to overcome unfavorable kinetic competition between the excited state lifetime and the rate of interfacial reactions. We apply this framework to leading examples of photovoltaic and photosynthetic devices to identify kinetic sources of energy loss and identify possible strategies to reduce this energy loss. The kinetic and energetic analyses undertaken are applicable to both photovoltaic and photosynthetic systems allowing for a holistic comparison of both types of solar energy conversion approaches.

Influence of QD photosensitizers in the photocatalytic production of hydrogen with biomimetic [FeFe]-hydrogenase. Comparative performance of CdSe and CdTe

Photocatalytic systems comprising a hydrogenase-type catalyst and CdX (X = S, Se, Te) chalcogenide quantum dot (QD) photosensitizers show extraordinary hydrogen production rates under visible light excitation. What remains unknown is the mechanism of energy conversion in these systems. Here, we have explored this question by comparing the performance of two QD sensitizers, CdSe and CdTe, in photocatalytic systems featuring aqueous suspensions of a [Fe₂ (μ-1,2-benzenedithiolate) CO₆] catalyst and an ascorbic acid sacrificial agent. Overall, the hydrogen production yield for CdSe-sensitized reactions QDs was found to be 13 times greater than that of CdTe counterparts. According to emission quenching experiments, an enhanced performance of CdSe sensitizers reflected a greater rate of electron transfer from the ascorbic acid (k_Asc). The observed difference in the QD-ascorbic acid charge transfer rates between the two QD materials was consistent with respective driving forces for these systems.

Hydroquinone redox mediator enhances the photovoltaic performances of chlorophyll-based bio-inspired solar cells

Chlorophyll (Chl) derivatives have recently been proposed as photoactive materials in next-generation bio-inspired solar cells, because of their natural abundance, environmental friendliness, excellent photoelectric performance, and biodegradability. However, the intrinsic excitation dynamics of Chl derivatives remain unclear. Here, we show sub-nanosecond pump-probe time-resolved absorption spectroscopy of Chl derivatives both in solution and solid film states. We observe the formation of triplet-excited states of Chl derivatives both in deoxygenated solutions and in film samples by adding all-trans-β-carotene as a triplet scavenger. In addition, radical species of the Chl derivatives in solution were identified by adding hydroquinone as a cation radical scavenger and/or anion radical donor. These radical species (either cations or anions) can become carriers in Chl-derivative-based solar cells. Remarkably, the introduction of hydroquinone to the film samples enhanced the carrier lifetimes and the power conversion efficiency of Chl-based solar cells by 20% (from pristine 1.29% to 1.55%). This enhancement is due to a charge recombination process of Chl-A⁺/Chl-D^-, which is based on the natural Z-scheme process of photosynthesis.

Null Exciton-Coupled Chromophoric Dimer Exhibits Symmetry-Breaking Charge Separation

A comprehensive understanding of the structure-property relationships in multichromophoric architectures has pushed the limits for developing robust photosynthetic mimics and molecular photovoltaics. The elusive phenomenon of null exciton splitting has gathered immense attention in recent years owing to the occurrence in unique chromophoric architectures and consequent emergent properties. Herein, we unveil the hitherto unobserved null exciton coupling assisted highly efficient photoinduced symmetry-breaking charge separation (SB-CS) in a Greek cross (+)-oriented spiro-conjugated perylenediimide dimer (Sp-PDI₂). Quantum chemical calculations have rationalized the infrequent manifestation of null exciton coupling behavior in Sp-PDI₂. Negligible contribution of long-range Coulombic and short-range charge-transfer mediated coupling renders a monomer-like spectroscopic signature for Sp-PDI₂ in toluene. The Greek cross (+)-arranged Sp-PDI₂ possesses a selective hole-transfer coupling, facilitating the ultrafast dissociation of null excitons and evolution of the charge-separated state in polar solvents. Radical cationic and anionic spectroscopic signatures were characterized by employing femtosecond transient absorption spectroscopy. The substantial hole transfer electronic coupling and lower activation energy barrier of Sp-PDI₂ accelerated the charge separation rate. The rate of charge recombination (CR) markedly decelerated due to falling into the inverted region of the Marcus parabola, where the driving force of CR is larger than the total reorganization energy for CR. Hence, the ratio of the rates for SB-CS over CR of Sp-PDI₂ exhibited an unprecedently high value of 2647 in acetonitrile. The current study provides impeccable evidence for the role of selective charge filtering in governing efficient SB-CS and thereby novel insights towards the design of biomimics and advanced functional materials.

Difference in light use strategy in red alga between Griffithsia pacifica and Porphyridium purpureum

Phycobilisomes (PBSs) are the largest light-harvesting antenna in red algae, and feature high efficiency and rate of energy transfer even in a dim environment. To understand the influence of light on the energy transfer in PBSs, two red algae Griffithsia pacifica and Porphyridium purpureum living in different light environment were selected for this research. The energy transfer dynamics in PBSs of the two red algae were studied in time-resolved fluorescence spectroscopy in sub-picosecond resolution. The energy transfer pathways and the related transfer rates were uncovered by deconvolution of the fluorescence decay curve. Four time-components, i.e., 8 ps, 94 ps, 970 ps, and 2288 ps were recognized in the energy transfer in PBSs of G. pacifica, and 10 ps, 74 ps, 817 ps and 1292 ps in P. purpureum. In addition, comparison in energy transfer dynamics between the two red algae revealed that the energy transfer was clearly affected by lighting environment. The findings help us to understand the energy transfer mechanisms of red algae for adaptation to a natural low light environment.