o-Vanillin functionalized mesoporous silica – coated magnetite nanoparticles for efficient removal of Pb(II) from water

Design, Synthesis, and Evaluation of Novel Magnetic Nanoparticles Combined with Thiophene Derivatives for the Removal of Cr(VI) from an Aqueous Solution

Most heavy metals are harmful to human health and the environment, even at extremely low concentrations. In natural waters, they are usually found only in trace amounts. Researchers are paying great attention to nanotechnology and nanomaterials as viable solutions to the problem of water pollution. This research focuses on the synthesis of organic thiophene derivatives that can be used as grafted ligands on the surface of silica-coated iron oxide nanoparticles to remove Cr(VI) chromium ions from water. The Vilsmeier-Haack reaction allows the formation of aldehyde groups in thiophene derivatives, and the resulting products were characterized by the FT-IR, NMR, and GC-MS. Schiff base is used as a binder between organic compounds and nanoparticles by the reaction of aldehyde groups in thiophene derivatives and amine groups on the surface of coated iron oxide nanoparticles. Schiff base functionalized Fe3O4 composites (MNPs@SiO2-SB-THCA) and (MNPs@SiO2-SB-THCTA) were successfully synthesized by homogeneous and heterogeneous methods and characterized by a combination of FT-IR, transmission electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The adsorption studies, kinetic modeling, adsorption isotherms, and thermodynamics of the two materials, MNPs@SiO2-SB-THCA and MNPs@SiO2-SB-THCTA, were investigated for the removal of Cr(VI) from water at room temperature and at 50 mg/L. The high adsorption capacity at pH 6 for MNPs@SiO2-SB-THCTA was 15.53 mg/g, and for MNPs@SiO2-SB-THCA, it was 14.31 mg/g.

Synthesis of CoFe2O4@SiO2-NH2 and its application in adsorption of trace lead

In this work, an amine functionalized CoFe2O4 magnetic nanocomposite material CoFe2O4@SiO2-NH2 was prepared successfully by modifying coated-CoFe2O4@SiO2 magnetic nanoparticles with 3-aminopropyltriethoxysilane (APTES) and became an efficient adsorbent for the separation and analysis of trace lead in water. The CoFe2O4@SiO2-NH2 magnetic nanoparticles were characterized using SEM, TEM, XRD, FTIR, VSM and BET techniques. Then, the adsorption mechanism was preliminarily investigated through ZETA, XPS, and adsorption kinetic experiments. The adsorption process was fitted by pseudo-second-order kinetics and a Langmuir isotherm model. The main adsorption mechanism of CoFe2O4@SiO2-NH2 towards lead ions was the chelation between the amino groups of CoFe2O4@SiO2-NH2 and lead cations, as well as the strong Coulomb interaction between the electron donor atoms O and N in the surface of CoFe2O4@SiO2-NH2 and lead cations. The adsorption capacity is 74.5 mg g-1 and the adsorbent can be reused 5 times. Hence, this prepared CoFe2O4@SiO2-NH2 could find potential applications for the removal of trace metal ions in surface water.

Preparation of Eco-Friendly Chelating Resins and Their Applications for Water Treatment

In the present study, two chelating resins were prepared and used for simultaneous adsorption of toxic metal ions, i.e., Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ (M^X+). In the first step, chelating resins were prepared starting with styrene-divinylbenzene resin, a strong basic anion exchanger Amberlite IRA 402(Cl^-) with two chelating agents, i.e., tartrazine (TAR) and amido black 10B (AB 10B). Key parameters such as contact time, pH, initial concentration, and stability were evaluated for the obtained chelating resins (IRA 402/TAR and IRA 402/AB 10B). The obtained chelating resins show excellent stability in 2M HCl, 2M NaOH, and also in ethanol (EtOH) medium. The stability of the chelating resins decreased when the combined mixture (2M HCl:EtOH = 2:1) was added. The above-mentioned aspect was more evident for IRA 402/TAR compared to IRA 402/AB 10B. Taking into account the higher stability of the IRA 402/TAR and IRA 402/AB 10B resins, in a second step, adsorption studies were carried out on complex acid effluents polluted with M^X+. The adsorption of M^X+ from an acidic aqueous medium on the chelating resins was evaluated using the ICP-MS method. The following affinity series under competitive analysis for IRA 402/TAR was obtained: Fe³⁺(44 µg/g) > Ni²⁺(39.8 µg/g) > Cd²⁺(34 µg/g) > Cr³⁺(33.2 µg/g) > Pb²⁺(32.7 µg/g) > Cu²⁺ (32.5 µg/g) > Mn²⁺(31 µg/g) > Co²⁺(29 µg/g) > Zn²⁺ (27.5 µg/g). While for IRA 402/AB 10B, the following behavior was observed: Fe³⁺(58 µg/g) > Ni²⁺(43.5 µg/g) > Cd²⁺(43 µg/g) > Cu²⁺(38 µg/g) > Cr³⁺(35 µg/g) > Pb²⁺(34.5 µg/g) > Co²⁺(32.8 µg/g) > Mn²⁺(33 µg/g) > Zn²⁺(32 µg/g), consistent with the decreasing affinity of M^X+ for chelate resin. The chelating resins were characterized using TG, FTIR, and SEM analysis. The obtained results showed that the chelating resins prepared have promising potential for wastewater treatment in the context of the circular economy approach.

Increasing Bioavailability of Trans-Ferulic Acid by Encapsulation in Functionalized Mesoporous Silica

Two types of mesoporous materials, MCM-41 and MCM-48, were functionalized by the soft-template method using (3-aminopropyl)triethoxysilane (APTES) as a modifying agent. The obtained mesoporous silica materials were loaded with trans-ferulic acid (FA). In order to establish the morphology and structure of mesoporous materials, a series of specific techniques were used such as: X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmet-Teller (BET), Fourier Transform Infrared Spectroscopy (FTIR) and thermogravimetric analysis (TGA). We monitored the in vitro release of the loaded FA at two different pH values, by using simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). Additionally, Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853 and Candida albicans ATCC 10231 were used to evaluate the antimicrobial activity of FA loaded mesoporous silica materials. In conclusion such functionalized mesoporous materials can be employed as controlled release systems for polyphenols extracted from natural sources.

Ag-Decorated Iron Oxides-Silica Magnetic Nanocomposites with Antimicrobial and Photocatalytic Activity

Nanotechnology offers unlimited possibilities for creating effective hybrid materials, which combine functional performance in environment depollution and antimicrobial defense with a lack of toxicity, biocompatibility, biodegradability, and natural availability. This paper presents the silver effect on photocatalytic and antibacterial activities of double-coated iron oxide nanoparticles (NPs), Fe3O4@SiO2/ZnO-Ag. The structural, morphological, and textural information of the, core-shell iron oxides-based superparamagnetic nanoparticles (IOMNPs) decorated with 5% Ag by ultrasound-assisted synthesis were evaluated by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDX), X-ray diffraction, Raman spectroscopy, and Brunauer-Emmett-Teller physisorption measurements. Although two synthesis temperatures of 95 and 80 °C were used for the co-precipitated iron oxide cores, the XRD patterns revealed the formation of a single magnetite, Fe3O4, phase. The sorption-photocatalytic activities under dark and UV irradiation encountered a maximum removal efficiency of the MB (90.47%) for the Fe3O4@SiO2/ZnO-Ag sample with iron oxide core obtained at 80 °C. The rate constant for the second-order kinetics was 0.0711 min-1 for 2 h, and the correlation coefficient R2 closed to unity. Two samples with Ag-decorated hybrid SiO2/ZnO shell and hierarchically interconnected porous structure with large surface area (328.8 and 342.5 m2g-1) exhibited the best disk diffusion antimicrobial activity against four microorganisms, especially gram-positive Staphylococcus aureus.

A Comparative Loading and Release Study of Vancomycin from a Green Mesoporous Silica

Since its first use as a drug delivery system, mesoporous silica has proven to be a surprisingly efficient vehicle due to its porous structure. Unfortunately, most synthesis methods are based on using large amounts of surfactants, which are then removed by solvent extraction or heat treatment, leading to an undesired environmental impact because of the generated by-products. Hence, in the present study, we followed the synthesis of a silica material with a wormhole-like pore arrangement, using two FDA-approved substances as templates, namely Tween-20 and starch. As far as we know, it is the first study using the Tween-20/starch combo as a template for mesoporous silica synthesis. Furthermore, we investigated whether the obtained material using this novel synthesis had any potential in using it as a DDS. The material was further analyzed by XRD, TEM, FT-IR, N₂ adsorption/desorption, and DLS to investigate its physicochemical features. Vancomycin was selected as the active molecule based on the extensive research engaged towards improving its bioavailability for oral delivery. The drug was loaded onto the material by using three different approaches, assuming its full retention in the final system. Thermal analysis confirmed the successful loading of vancomycin by all means, and pore volume significantly decreased upon loading, especially in the case of the vacuum-assisted method. All methods showed a slower release rate compared to the same amount of the pure drug. Loadings by physical mixing and solvent evaporation released the whole amount of the drug in 140 min, and the material loaded by the vacuum-assisted method released only 68.2% over the same period of time, leading us to conclude that vancomycin was adsorbed deeper inside the pores. The kinetic release of the three systems followed the Higuchi model for the samples loaded by physical mixing and vacuum-assisted procedures, while the solvent evaporation loading method was in compliance with the first-order model.

Novel Magnetic Nanocomposites Based on Carboxyl-Functionalized SBA-15 Silica for Effective Dye Adsorption from Aqueous Solutions

In this study, three novel magnetic nanocomposites based on carboxyl-functionalized SBA-15 silica and magnetite nanoparticles were prepared through an effective and simple procedure and applied for methylene blue (MB) and malachite green G (MG) adsorption from single and binary solutions. Structure, composition, morphology, magnetic, and textural properties of the composites were thoroughly investigated. The influence of the amount of carboxyl functional groups on the physicochemical and adsorptive properties of the final materials was investigated. The capacity of the synthesized composites to adsorb MB and MG from single and binary solutions and the factors affecting the adsorption process, such as contact time, solution pH, and dye concentration, were assessed. Kinetic modelling showed that the dye adsorption mechanism followed the pseudo-second-order kinetic model, indicating that adsorption was a chemically controlled multilayer process. The adsorption rate was simultaneously controlled by external film diffusion and intraparticle diffusion. It was evidenced that the molecular geometry of the dye molecule plays a major role in the adsorption process, with the planar geometry of the MB molecule favoring adsorption. The analysis of equilibrium data revealed the best description of MB adsorption behavior by the Langmuir isotherm model, whereas the Freundlich model described better the MG adsorption.

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles and their derivatives. Nanosilica possesses unique properties, including low toxicity, chemical inertness, and excellent biocompatibility, and can be developed from a variety of sustainable precursor materials. Herein, we provide an account of the recent advances in the synthesis and utilization of nanosilica for wastewater treatment. This review covers key physicochemical aspects of several nanosilica materials and a variety of nanotechnology-enabled wastewater treatment techniques such as adsorption, separation membranes, and antimicrobial applications. It also discusses the prospective design and tuning options for nanosilica production, such as size control, morphological tuning, and surface functionalization. Informative discussions on nanosilica production from agricultural wastes have been offered, with a focus on the synthesis methodologies and pretreatment requirements for biomass precursors. The characterization of the different physicochemical features of nanosilica materials using critical surface analysis methods is discussed. Bio-hybrid nanosilica materials have also been highlighted to emphasize the critical relevance of environmental sustainability in wastewater treatment. To guarantee the thoroughness of the review, insights into nanosilica regeneration and reuse are provided. Overall, it is envisaged that this work's insights and views will inspire unique and efficient nanosilica material design and development with robust properties for water and wastewater treatment applications.

A comprehensive review on nanobiotechnology for bioremediation of heavy metals from wastewater

Removal of contaminants from wastewater is a big concern for the scientific community. Heavy metals are one of the major contaminants present in wastewater. Heavy metals such as Cd²⁺ , Pb²⁺ , Mn²⁺ , and so forth, are highly toxic and pose a serious threat to the environment due to their nonbiodegradable nature. With the advent of nanobiotechnology, heavy metal contaminants can be mitigated with the help of nanomaterials produced by eco-friendly methods. Specially designed bionanomaterials often exhibit properties such as increased shelf life, self-healing nature, adaptability in different environments, and cost-effectiveness, thus showing advantages over nanomaterials produced by physicochemical methods. Due to their high specificity and adsorption capacity, bionanomaterials can remove heavy metals present even in a very low concentration in wastewater. The use of bionanotechnology in their remediation paves a way for environmental sustainability and helps in cost reduction. This paper intends to discuss the nanobiotechnological approach for the remediation of heavy metals from wastewater. Furthermore, the paper also reviews some important nanomaterials and their potential applications in the depollution of heavy-metal contaminated wastewater.

Nanoadsorbants for the Removal of Heavy Metals from Contaminated Water: Current Scenario and Future Directions

Heavy metal pollution of aquatic media has grown significantly over the past few decades. Therefore, a number of physical, chemical, biological, and electrochemical technologies are being employed to tackle this problem. However, they possess various inescapable shortcomings curbing their utilization at a commercial scale. In this regard, nanotechnology has provided efficient and cost-effective solutions for the extraction of heavy metals from water. This review will provide a detailed overview on the efficiency and applicability of various adsorbents, i.e., carbon nanotubes, graphene, silica, zero-valent iron, and magnetic nanoparticles for scavenging metallic ions. These nanoparticles exhibit potential to be used in extracting a variety of toxic metals. Recently, nanomaterial-assisted bioelectrochemical removal of heavy metals has also emerged. To that end, various nanoparticle-based electrodes are being developed, offering more efficient, cost-effective, ecofriendly, and sustainable options. In addition, the promising perspectives of nanomaterials in environmental applications are also discussed in this paper and potential directions for future works are suggested.

Thiol modified bimodal mesoporous silica nanoparticles for removal and determination toxic vanadium from air and human biological samples in petrochemical workers

Investigation of exposure to toxic vanadium (V) in petrochemical workers is very important for human health, and it must be removed and determined in workplace air and human biological samples. In this research, the enriched adsorbent based on the thiol modified bimodal mesoporous silica nanoparticle (HS-UVM₇) was used for the extraction vanadium in human blood by the dispersive sonication ionic liquid micro solid phase extraction (DS-IL-μ-SPE) at pH of 4.5. In addition, the vanadium (V) was removed from the industrial workplace air based on HS-UVM₇ adsorbent by the liquid-solid phase-gas removal (LSP-GR). In the static and dynamic system, the vanadium (V) was removed from artificial air with HS-UVM₇ and compared with the polyvinyl chloride membrane (PCM, sorbent in 7300 NIOSH). The LSP-GR procedure based on HS-UVM₇ had more recovery and adsorption capacity as compared to PCM. The adsorption capacity of HS-UVM₇ and UVM₇ adsorbents were obtained 144.1 mg g^-1 and 23.3 mg g^-1, respectively. In addition, the main parameters effected on extraction vanadium in blood samples and removal from air were studied and optimized by ET-AAS. The LOD, RSD%, linear range (LR) and enrichment factor (EF) was achieved 0.03 μg L^-1, 3.1, 0.1-4.5 μg L^-1 and 48.7, respectively for extraction of vanadium in 10 mL of blood samples by the DS-IL-MSPE procedure. The validation of the methodology was confirmed by standard addition to gas phase and using certified reference materials (CRM, NIST) or ICP-MS in human blood samples.

Efficient Activation of Coal Fly Ash for Silica and Alumina Leaches and the Dependence of Pb(II) Removal Capacity on the Crystallization Conditions of Al-MCM-41

In this study, four different coal fly ashes (CFAs) were used as raw materials of silica and alumina for the preparation of the alumina-containing Mobil Composition of Matter No. 41 (Al-MCM-41) and the exploration of an activation strategy that is efficient and universal for various CFAs. Alkaline hydrothermal and alkaline fusion activations proceeded at different temperatures to determine the best treatment parameters. We controlled the pore structure and surface hydroxyl density of the CFA-derived Al-MCM-41 by changing the crystallization temperature and aging time. The products were characterized by small-angle X-ray diffraction, nitrogen isotherms, Fourier-transform infrared spectroscopy, 29Si silica magic-angle spinning nuclear magnetic resonance, and transmission electron microscopy, and they were then grafted with thiol groups to remove Pb(II) from aqueous solutions. This paper innovatively evaluates the CFA activation strategies using energy consumption analysis and determines the optimal activation methodology and parameters. This paper also unveils the effect of the crystallization condition of Al-MCM-41 on its subsequent Pb(II) removal capacity. The results show that the appropriate selection of crystallization parameters can considerably increase the removal capacity over Pb(II), providing a new path to tackle the ever-increasing concern of aquic heavy-metal pollution.

Dual-template magnetic molecularly imprinted polymer-based sorbent for simultaneous and selective detection of phenolic endocrine disrupting compounds in foodstuffs

In this research, an efficient (94.9-99.4%) and fast (5 min) method has been developed and validated for simultaneous identification and quantification of phenolic endocrine disrupting compounds with an emphasis on bisphenol A (BPA) and 4-cumylphenol (4-CP) in food stuffs using a dual-template magnetic, molecularly-imprinted polymer (dt-MMIP). The dt-MMIP was synthesized by a sol-gel method using Fe₃O₄@SiO₂ (as the core) and BPA and 4-CP (as templates). The dt-MMIP was coupled with magnetic solid phase extraction to simultaneously detect BPA and 4-CP in food samples. BPA was measured from bottled water and fruit juice samples samples at 0.36 and 0.24 ng mL^-1, respectively, while 4-CP in those samples was 0.33 and 0.16 ng mL^-1, respectively. Their detection limits were estimated as 0.04 and 0.05 ng mL^-1, respectively. The developed dt-MMIP method was highly reproducible, while maintaining a good cyclability up to 20 cycles.

Magnetic poly-o-vanillin-functionalized core–shell nanomaterials as a smart sorbent for scavenging mercury(ii) from aqueous solution

In the present work, a poly-o-vanillin-functionalized magnetic nanoparticle of PoVan/CoFe₂O₄@mSiO₂ with core–shell structure was synthesized through a facile, green and low cost method.

Silica-Coated Magnetic Nanocomposites for Pb2+ Removal from Aqueous Solution

Magnetic iron oxide-silica shell nanocomposites with different iron oxide/silica ratio were synthesized and structurally characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), small-angle neutron scattering, magnetic and N2-sorption studies. The composite that resulted with the best properties in terms of contact surface area and saturation of magnetization was selected for Pb2+ adsorption studies from aqueous media. The material presented good absorption capacity (maximum adsorption capacity 14.9 mg·g−1) comparable with similar materials presented in literature. Its chemico-physical stability and adsorption capacity recommend the nanocomposite as a cheap adsorbent material for lead.

Agglomeration of 10 nm amine-functionalized nano-magnetite does not hinder its efficiency as an environmental adsorbent

Amine-functionalized magnetite (nFe₃O₄-NH₂) of two different sizes, 10 nm and 250 nm, were compared as environmental adsorbents. They were synthesized by co-precipitation (10 nm-nFe₃O₄-NH₂) and solvothermal (250 nm-nFe₃O₄-NH₂) methods, respectively. The prepared amine-functionalized magnetite was characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, vibrating sample magnetometer, Fourier transform infrared spectroscopy, size distribution analysis and surface area analysis to compare the properties of different sizes of nFe₃O₄-NH₂. Both nFe₃O₄-NH₂ contained cubic Fe₃O₄ crystalline structure. The 250 nm-nFe₃O₄-NH₂ exhibited higher magnetic saturation value than the 10 nm-nFe₃O₄-NH₂, but both could be separated from an aqueous solution using an external magnet. The surface area and pore volume of the smaller-sized 10 nm-nFe₃O₄-NH₂ was larger than that of 250 nm-nFe₃O₄-NH₂, but stronger aggregation was observed in the 10 nm-nFe₃O₄-NH₂. Batch adsorption of lead indicated that the 10 nm-nFe₃O₄-NH₂ was a better adsorbent than the 250 nm-nFe₃O₄-NH₂. The maximum adsorption capacity of lead for the 10 nm-nFe₃O₄-NH₂ and the 250 nm-nFe₃O₄-NH₂ were 74.48 mg g^-1 and 54.54 mg g^-1, respectively. The stronger aggregation of nanoparticles with a smaller particle size did not affect the superior performance of the 10 nm-nFe₃O₄-NH₂ as an environmental adsorbent.

Schiff base-functionalized mesoporous silicas (MCM-41, HMS) as Pb(ii) adsorbents

MCM-41@salen, HMS-C12@salen and HMS-C16@salen sorbents present high sorption capacities for Pb(ii) and are suitable materials for the removal of Pb(ii).

Application of modificated magnetic nanomaterial for optimization of ultrasound-enhanced removal of Pb2+ ions from aqueous solution under experimental design: Investigation of kinetic and isotherm

Magnetic γ-Fe₂O₃ nanoparticles modificated by bis(5-bromosalicylidene)-1,3-propandiamine (M-γ-Fe₂O₃-NPs-BBSPN) and characterized by field emission scanning electron microscopy (FE-SEM), Fourier transforms infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). This modified compound as novel adsorbent was applied for the ultrasound-assisted removal of Pb²⁺ ion in combination with flame atomic absorption spectroscopy (FAAS). The influences of the effective parameters including initial Pb²⁺ ion concentration, pH, adsorbent mass and ultrasound time were optimized by central composite design (CCD). Maximum removal percentage of Pb²⁺ ion which obtained at 25mgL^-1 of Pb²⁺, 25mg of adsorbent and 4min mixing with sonication at pH 6.0. The precision of the equation obtained by CCD was confirmed by the analysis of variance and calculation of correlation coefficient relating the predicted and the experimental values of removal percentage of Pb²⁺ ion. The kinetic and isotherm of ultrasound-assisted removal of Pb²⁺ ion was well described by second-order kinetic and Langmuir isotherm model with maximum adsorption capacity of 163.57mgg^-1.

Review on nanoadsorbents: a solution for heavy metal removal from wastewater

Elimination of heavy metals from contaminated streams is of prime concern due to their ability to cause toxic chaos with the metabolism of flora and fauna alike. Use of advanced nano-engineered technologies such as the innovative combination of surface chemistry, chemical engineering fundamentals and nanotechnology opens up particularly attractive horizons towards treatment of heavy metal contaminated water resources. The obtained product of surface engineered nanoadsorbent produced has successfully proven to show rapid adsorption rate and superior sorption efficiency towards the removal of a wide range of defiant heavy metal contaminants in wastewater. The use of these materials in water treatment results in markedly improved performance features like large surface area, good volumetric potential, extra shelf-lifetime, less mechanical stress, stability under operational conditions with excellent sorption behaviour, no secondary pollution, strong chelating capabilities and they are easy to recover and reuse. This review intends to serve as a one-stop-reference by bringing together all the recent research works on nanoparticles synthesis and its advantages as adsorbents in the treatment of heavy metal polluted wastewater that have so far been undertaken, thereby providing researchers with a deep insight and bridging the gap between past, present and future of the elegant nanosorbents.