Co-precipitation synthesis of BiOI/(BiO)2CO3: Brief characterization and the kinetic study in the photodegradation and mineralization of sulfasalazine

Bimetallic Ag/Fe-MOG derived flake-like Ag2O/Fe2O3 p-n heterojunction for efficient photodegradation organic pollutants within a wide pH range

In this paper, we reported a facile and clean strategy to prepare the flake-like Ag2O/Fe2O3 bimetallic p-n heterojunction composites for photodegradation organic pollutants. The surface morphology, crystal structure, chemical composition and optical properties of Ag2O/Fe2O3 were characterized by SEM, high-resolution TEM images with EDX spectra, XRD, XPS, FT-IR and UV-vis DRS spectra respectively. The formation of Ag2O/Fe2O3 p-n heterojunction facilitated the interfacial transfer of electrons as well as the separation of charge carries. Hence, the as-synthesized Ag2O/Fe2O3-3 composites exhibited ultra-high photocatalytic activity. Under the experimental conditions of catalyst dosage of 0.4 mg mL-1 and irradiation time of 60 min, the degradation conversion rate of rhodamine B reached 96.1 %, which was 5.0 and 2.8 times of pure phase Ag2O and Fe2O3, respectively. Meanwhile, the degradation performance of Ag2O/Fe2O3-3 was not limited by pH, and it can achieve high degradation efficiency under 3-11. In addition, Ag2O/Fe2O3-3 also showed superb degradation ability for other common anionic dyes, cationic dyes and antibiotics. XPS and FT-IR spectra showed that Ag2O/Fe2O3-3 retained a carbon skeleton that facilitated electron transport and light absorption conversion. And the analyses of quenching experiment and EPR demonstrated •O2-, •OH and h+ were crucial reactive oxidant species contributing to the rapid organic pollutant degradation. This work provides new insights into obtaining p-n photocatalysts heterojunction with excellent catalytic activity for removing organic pollutants from wastewater.

Different solvents and organic modifiers for the control of crystallographic parameters in nano-crystallite hydroxyapatite for amplification of photocatalytic activity

In this research, HAp nanocrystals were synthesized using conventional wet chemical precipitation methods using various organic modifiers, including urea, palmitic acid, and naphthalene. Ethanol and isopropyl alcohol (IPA) were used as solvents in this process. Different characterization techniques, namely X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-vis absorption spectroscopy, were employed to ascertain the formation of HAp nanocrystals. Numerous structural parameters, including lattice parameters, unit cell size, volume of the unit cell, specific surface area, degree of crystallinity, dislocation density, macrostrain, and crystallinity index, were assessed using XRD data. The linear straight-line method of Scherrer's equation, Monshi-Scherrer's method, the Williamson-Hall method, the size-strain plot method, the Halder-Wagner method, and Sahadat-Scherrer's model were applied to compute the crystallite size of the synthesized HAp samples. All the synthesized HAp has crystalline structures within the permissible range of 1-150 nm which were estimated from the XRD data using the mentioned models. However, the values for strain (from -3 × 10-4 to 6.4 × 10-3), strain (from -9.599 × 104 to 7 × 1010 N m-2), and energy density (from -11 × 1011 to 2 × 107 J m-3) were also calculated for the synthesized samples. In addition, the optical band gap energy of the synthesized HAp was computed (5.89 to 6.19 eV). The synthesis media have a control on the crystallographic planes, e.g. in the case of the ethanol medium, the (110) plane exhibited significant intensity (which could potentially serve as a driving force for enhancing photocatalytic activity). The use of 100% ethanol HAp yields the most favorable outcome regarding both the degradation percentage (91.79%) and degradation capacity (7%) for the Congo red dye.

Construction of p-n-p nano heterojunction through coupling La2O3, (BiO)2CO3 and Ag3PO4 for effective photocatalytic degradation of doxycycline: Insights into mechanism, pathway and intermediate toxicity evaluation

The present work is centred around the development of La2O3/(BiO)2CO3/Ag3PO4 (LBA), a p-n-p nano-heterojunction to photodegrade doxycycline under visible light irradiation. Here, ultrasonication assisted co-precipitation method was employed to synthesize the photocatalyst. The photocatalyst was characterized using different analysis such as SEM, TEM, elemental mapping, XRD, XPS, FTIR, Raman, BET, DRS, PL and EIS which confirmed the successful fabrication of LBA and their excellent ability to refrain the e-/h+ recombination owing to the construction of the heterojunction. LBA was found to degrade DOX by 91.75 % with the high mineralization of 87.23%. The impact of the reaction parameters influencing the photodegradation process including the concentration of the NCs and DOX, pH and the influence of the commonly present anions were studied. The stability and reusability of the LBA was assessed through subjecting it to four cycles of photodegradation of DOX. In addition, the recovered LBA was characterized through XPS and XRD analysis to confirm the particles stability and reusability. The active participation of the photogenerated charges and the reactive oxygen species were identified through the scavenging assay and ESR analysis. Further, GC-MS/MS analysis was performed to put forward a plausible photodegradation pathway. The toxicity of the end products as well as the intermediates was predicted through ECOSAR software.

Constructing a Z-Scheme Co3O4/BiOBr Heterojunction to Enhance Photocatalytic Peroxydisulfate Oxidation of High-Concentration Rhodamine B: Mechanism, Degradation Pathways, and Toxicological Evaluations

Photocatalytic coupling technologies have emerged as popular strategies to increase the treatment efficiency of dye-containing wastewater. Herein, the Z-scheme Co3O4/BiOBr heterojunction (Z-CBH) was constructed and developed as a photocatalytic peroxydisulfate (PDS) activator for the degradation of high-concentration Rhodamine B (RhB). Multiple testing techniques were employed to confirm the formation of Z-CBHs. When 0.1 g·L-1 of Z-CBH20 and 1.0 mmol·L-1 of PDS were added simultaneously under simulated sunlight irradiation, the RhB degradation efficiency could approach 91.3%. Its reaction rate constant (0.01231 min-1) was much beyond the sum of those in the Z-CBH20/light system (0.00436 min-1) and the PDS/light system (0.0062 min-1). h+, •OH, •O2-, SO4•-, and 1O2 were detected as the dominant reactive species for RhB degradation. The potential mechanism of photocatalytic PDS oxidation was proposed. The possible intermediates were determined by high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry assisted with density functional theory and Fukui theory. The possible degradation pathways of RhB degradation were put forward. The toxicological properties of RhB and its intermediates were evaluated by quantitative structure-activity relationship prediction. This work will not only provide a reference for developing photocatalytic persulfate activators but also gain an insight into the degradation pathways of RhB and the toxicity of its intermediates.

Current trends on dry photocatalytic oxidation technology for BTX removal: Viable light sources and highly efficient photocatalysts

One of the main gaseous pollutants released by chemical production industries are benzene, toluene and xylene (BTX). These dangerous gases require immediate technology to combat them, as they put the health of living organisms at risk. The development of heterogeneous photocatalytic oxidation technology offers several viewpoints, particularly in gaseous-phase decontamination without an additional supply of oxidants in air at atmospheric pressure. However, difficulties such as low quantum efficiency, ability to absorb visible light, affinity towards CO2 and H2O synthesis, and low stability continue to limit its practical use. This review presents recent advances in dry-phase heterogeneous photodegradation as an advanced technology for the practical removal of BTX molecules. This review also examines the impact of low-cost light sources, the roles of the active sites of photocatalysts, and the feasible concentration range of BTX molecules. Numerous studies have demonstrated a significant improvement in the efficiency of the photodegradation of volatile organic compounds by enhancing the photocatalytic reactor system and other factors, such as humidity, temperature, and flow rate. The mechanism for BTX photodegradation based on density functional theory (DFT), electron paramagnetic resonance (EPR) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) investigations is also discussed. Finally, the present research complications and anticipated future developments in the field of heterogeneous photocatalytic oxidation technology are discussed.

Bismuth-Based Z-Scheme Heterojunction Photocatalysts for Remediation of Contaminated Water

Agricultural runoff, fuel spillages, urbanization, hospitalization, and industrialization are some of the serious problems currently facing the world. In particular, byproducts that are hazardous to the ecosystem have the potential to mix with water used for drinking. Over the last three decades, various techniques, including biodegradation, advanced oxidation processes (AOPs), (e.g., photocatalysis, photo-Fenton oxidation, Fenton-like oxidation, and electrochemical oxidation process adsorption), filtration, and adsorption techniques, have been developed to remove hazardous byproducts. Among those, AOPs, photocatalysis has received special attention from the scientific community because of its unusual properties at the nanoscale and its layered structure. Recently, bismuth based semiconductor (BBSc) photocatalysts have played an important role in solving global energy demand and environmental pollution problems. In particular, bismuth-based Z-scheme heterojunction (BBZSH) is considered the best alternative route to overhaul the limitations of single-component BBSc photocatalysts. This work aims to review recent studies on a new type of BBZSH photocatalysts for the treatment of contaminated water. The general overview of the synthesis methods, efficiency-enhancing strategies, classifications of BBSc and Z-scheme heterojunctions, the degradation mechanisms of Z- and S-schemes, and the application of BBZSH photocatalysts for the degradation of organic dyes, antibiotics, aromatics compounds, endocrine-disrupting compounds, and volatile organic compounds are reviewed. Finally, challenges and the future perspective of BBZSH photocatalysts are discussed.

Electron confinement promoted the electric double layer effect of BiOI/β-Bi2O3 in photocatalytic water splitting

In the realm of photocatalysis, understanding the interface issues (solid/solid and solid/liquid) inherent in heterojunction at the atomic level is the ultimate for engineering an efficient photocatalyst. Herein, an electrophoretic deposition technique is adopted to synthesize BiOI/β-Bi2O3 heterojunction, exhibiting superior photocatalytic activity and stability in H2 evolution (91.5 μmol g-1 h-1) and H2O2 production (11.3 mg L-1 h-1). Combined with the experimental and computational results, a lower free energy of hydrogen evolution reaction (252.4 meV) has been observed contrast to BiOI and β-Bi2O3 samples. A carrier transfer process of like S-scheme heterojunction is proposed based on density of states (DOS) and carrier distribution calculations. The theoretical calculations illustrate the transition dipole moment, migration and accumulation of carrier in BiOI/β-Bi2O3 heterojunction. Subsequent ab initio molecular dynamics (AIMD) results of solid/liquid interface systems (BiOI/β-Bi2O3/H2O and β-Bi2O3/H2O) unravel the interface H2O (solvent) behaviors. The local aggregation of photo-generated electrons in BiOI/β-Bi2O3/H2O leads to a large potential drop, high proton migration rate and the steady electric double layer (EDL) structure compared to the β-Bi2O3/H2O, which facilitates the occurrence of photocatalytic reactions in solution. In addition to offering new insights into the hydrogen evolution and proton transfer in the EDL model and the association between the heterojunction effect and EDL structure, this work also introduces a novel design strategy for Bi-based heterojunctions.

A comprehensive review on the boosted effects of anion vacancy in the heterogeneous photocatalytic degradation, part I: Focus on sulfur, nitrogen, carbon, and halogen vacancies

The greenest environmental remediation way is the photocatalytic degradation of organic pollutants. However, limited photocatalytic applications are due to poor sunlight absorption and photogenerated charge carriers' recombination. These limitations can be overcome by introducing anion vacancy (AV) (O, S, N, C, and Halogen) defects in semiconductors that enhance light harvesting, facilitate charge separation, modulate electronic structure, and produce reactive radicals. In continuing part A of this review, in this part, we summarized the recent AVs' research, including S, N, C, and halogen vacancies on the boosted photocatalytic features of semiconductor materials, like metal oxides/sulfides, oxyhalides, and nitrides in detail. Also, we outline the recently developed AV designs for the photocatalytic degradation of organic pollutants. The AV creating and analysis methods and the recent photocatalytic applications and mechanisms of AV-mediated photocatalysts are reviewed. AV engineering photocatalysts' challenges and development prospects are illustrated to get a promising research direction.

Photocatalytic evaluation of synthesized MnO2/Fe3O4 NCs by Q. infectoria extract for removal Ni(II) and phenol: Study phytochemical, kinetics, thermodynamics, and antibioactivity

In the present study, the plant extract of the Quercus infectoria galls was used as a reducing, capping, and stabilizer agent for green synthesized MnO2 nanoparticles (NPs) and MnO2/Fe3O4 nanocomposites (NCs) due to its reduction ability from polyphenol and antioxidant content. The green synthesized nanomaterials have been characterized by various techniques such as FTIR, UV-vis, XRD, SEM, EDS, and TEM. The average size of about 7.4 and 6.88 nm was estimated for the NCs crystals of SEM images and XRD analysis by the Scherrer and Williamson-Hall methods. The green synthesized MnO2/Fe3O4 NCs (dosage: 0.1 g) have shown high photocatalytic activity for the removal of Ni(II) in acidic and basic solutions under visible irradiation (220 V lamp). The removal efficiency for the Ni(II) solution (3.6 × 10-3 M) at pH = 3 was increased to pH = 12 from 56 % to 98 %. The oxidase-like activity of MnO2/Fe3O4 NCs at different dosages (0.05, 0.1, and 0.15 g) for the removal and colorimetric of phenol (1 g/40 mL) in the presence 4-AAp (1 g) was seen after only 28, 13, and 5 s, respectively. The kinetic evaluation results showed the pseudo-second-order kinetics model closely matched the adsorption capacity theoretical values qe,cal (578.03, 854.70, 892.85, and 917.43 mg.g-1) and experimental values qe,exp (521.84, 839.74, 887.86, and 913.22 mg.g-1) at different initial pH solution (3-12) for Ni(II) removal. In addition, the investigation of isotherm models revealed that the Langmuir model (R2 = 0.9955) explains a better estimate for a monolayer and favorable removal of Ni(II) ions onto NCs. Also, the low Temkin constant, BT < 0 (0.0200 kJ.mol-1), and positive ∆H° value (0.103 kJ.mol-1.K-1) illustrated that Ni(II) removal is physical sorption and endothermic process. However, the obtained thermodynamic results showed the negative values ΔG° with the increase in temperature (303-318 K) toward a spontaneous removal process of Ni(II). Finally, the plant antioxidant (200 to 3200 μg/mL) and antimicrobial activities (0.001 to 0.1 g/mL) for plant extract, MnO2 NPs, and MnO2/Fe3O4 NCs were evaluated against Gram-positive and Gram-negative bacteria species.

Congregating Ag into γ-Bi2O3 coupled with CoFe2O4 for enhanced visible light photocatalytic degradation of ciprofloxacin, Cr(VI) reduction and genotoxicity studies

The work attempts to construct a highly effective γ-Bi2O3/CoFe2O4/Ag visible active photocatalyst for the enhanced degradation of ciprofloxacin (CIP) and Cr(VI) reduction. γ-Bi2O3/CoFe2O4/Ag photocatalyst was prepared by simple solid phase and co-precipitation methods. The nanosphere shaped CoFe2O4 photocatalyst are embedded on top of γ-Bi2O3 nanotriangle. The addition of Ag into γ-Bi2O3/CoFe2O4 heterojunction primitively facilitates the photocatalytic activity in higher rate. The quantitative analysis of photocatalyst possesses to have lower e-/h+ recombination rate compared to its counterparts. The prepared γ-Bi2O3/CoFe2O4/Ag photocatalyst showed 96.6% degradation of CIP in 220 min and 99.2% reduction of Cr(VI) in 120 min. Additionally, γ-Bi2O3/CoFe2O4/Ag showed outstanding recyclability and long-term stability with a degradation efficiency of 96.5% even after six cycles. The intermediate products formed were identified and the degradation pathway was elucidated by gas chromatography-mass spectrometry analysis. Total organic carbon measurement was carried over to assess the efficiency of complete degradation and the removal percentage was found to be 98%. The end product toxicity study towards bacteria was proven to have less toxicity level when compared to parent compound. Lastly, the genotoxicity of γ-Bi2O3/CoFe2O4/Ag photocatalyst was tested in Allium cepa and the results confirmed to have no cause of toxicity impacts. Overall, the work not only tends to provide a highly visible active γ-Bi2O3/CoFe2O4/Ag photocatalyst, but also attributes to have no further negative imprints in the environment.

An experimental design study of photocatalytic activity of the Z-scheme silver iodide/tungstate binary nano photocatalyst

A binary AgI/ Ag2WO4 photocatalyst was fabricated and characterized by SEM, XRD, UV-Vis DRS, and FT-IR. It was then used to photodegrade sodium ceftriaxone (CTX) in an aqueous solution. The band gap energies of 2.95, 2.78, and 2.62 eV were obtained by the Kubelka-Munk model for Ag2WO4, AgI, and AgI/Ag2WO4 catalysts. The samples have pHPZC values of 6.9, 4.2, and 6.6, respectively. The synergistic photocatalytic activity of the coupled system depended on the AgI:Ag2WO4 mole ratio and grinding time (optimums:mole ratio of 4:1 and time 30 min). The experimental design was used for optimizing the conditions and a quadratic model well-processed the data based on the model F value of 131.87 > F0.05,14,13 = 2.55 and LOF F value of 0.78 < F0.05,10,3 = 8.78. The optimized RSM run included the irradiation time of 85 min, 3.5 mg/L of CTX sample at pH 9, and a catalyst dose of 1.0 g/L. Under the optimized conditions, about 63% of CTX molecules were photodegraded. In the study of the scavenging agents, the direct Z-scheme mechanism accumulated electrons in the CB-AgI and the holes in the VB-Ag2WO4 level, as stronger reducing and oxidizing centers than the accumulated electrons and holes of the type (II) heterojunction mechanism. Compared to a CTX oxidation potential of about 0.06 V, the direct Z-scheme mechanism is more favorable to reduce or oxidize it.

Insight into the improved photocatalytic removal of tetracycline hydrochloride by constructing cobalt doping in 2D/2D (BiO)2CO3/BiOCl type-II heterojunctions

Element doping coupled with heterojunction construction and morphology control is an efficient way to improve the properties of photocatalytic materials. Here, a thiourea-modified 2D/2D cobalt-doped (BiO)₂CO₃/BiOCl heterojunction photocatalyst (denoted as Co-(BC/BL)_Tu) was constructed by a simple one-pot hydrothermal method. The photocatalytic property of Co-(BC/BL)_Tu product was evaluated by the photocatalytic degradation of tetracycline hydrochloride (TC-HCl). Compared with the pure (BiO)₂CO₃ sample, the as-prepared Co-(BC/BL)_Tu product displayed outstanding visible-light-driven photodegradation property. The photodegradation rate constant k value of the Co-(BC/BL)_Tu product was 5.2 times higher than that of pure (BiO)₂CO₃, which was the result of the synergistic effect of the 2D/2D structure, cobalt doping and type-Ⅱ heterostructures. It could simultaneously boost the visible light harvesting of the photocatalytic system as well as charge separation. This study provides a facile and promising strategy for constructing a high-effective photocatalytic system by combining morphology control engineering, doping engineering, and heterostructure engineering.

The enhance mechanism of DOM on tetracyclines degradation by electrochemical technology: A improvement of treatment processes

Tetracyclines (TC) is a typical broad-spectrum antimicrobial agent, and excessive use of TC can lead to a large accumulation of residual tetracycline in water. DOM is organic substances that can pass through the 0.45 μm filter. While dissolved organic matter (DOM) is one of the most significant substances in water, which has an important effect on water treatment. In this study, ultraviolet and visible spectrophotometry (UV-Vis) is applied to explore DOM to the effect of the electrochemical degradation. Three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM) is used to identify the component variation of DOM after the electrochemical oxidation (EO). Liquid chromatograph mass spectrometer (LC-MS) is used to confirm the degradation pathway of TC whether spontaneous or electrochemical oxidation. High performance liquid chromatography (HPLC) suggests the ROS production by DOM in the electrochemical oxidation under different conditions. Results show that DOM can promote the degradation of TC in the electrochemical oxidation. Tailwater DOM containssubstances can produce persistent free radicals, which can promote the degradation under light and dark conditions, natural source DOM can produce more free radicals under light. Therefore, TC wastewater should be added tailwater to promote the degradation of TC before the further water treatment. Otherwise, TC can be degraded to differentpathways (light, electricity, and degrade spontaneously). This study provides a significant idea for practical water treatment of tetracyclines, and promotes the practical application of electrochemical technology.

A core/shell TiO2 magnetized molecularly imprinted photocatalyst (MMIP@TiO2): synthesis and its photodegradation activity towards sulfasalazine

Although the selectivity of TiO₂ for the degradation of target molecules is not enough, it is a broadly employed photocatalyst for the degradation of many pollutants. Molecularly imprinted compounds owing to their extreme recognition specificity have become increasingly popular for preparing selective photocatalysts. In this work, based on molecularly imprinted magnetized TiO₂ (MMIP@TiO₂), a selective photocatalyst was prepared. Via the co-precipitation method, Fe₃O₄ particles were prepared and coated respectively by SiO₂, vinyl end groups, and molecularly imprinted polymers (MIP). The synthesized photocatalyst was characterized by the X-ray diffraction method (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive x-ray spectrometry (EDX), vibrating sample magnetometry (VSM), high-performance liquid chromatography (HPLC), and photoluminescence analysis (PL). The photocatalyst was then used to degrade the sulfasalazine pharmaceutical pollutant under UV irradiation. An average crystallite size of 9 nm was obtained for the MMIP@TiO₂ sample from the Scherrer formula and 34.5 nm by the Williamson-Hall formula. The results revealed that compared to the non-imprinted counterpart, the molecularly imprinted photocatalyst had significantly higher efficiency and selectivity for the degradation of target molecules. The process was forwarded with 90% efficiency within 10 min. Optimal conditions were 10.0 min irradiation when 25 mL SSZ solution (50 mg/L), 0.07 g/L catalyst dose, and pH 6.0 were applied. The maximum removal efficiency was calculated to be 92%. The external magnetic field quickly removed the photocatalyst from the solution and regenerated it. It was revealed that after each regeneration cycle, the efficiency dropped. Nevertheless, 63% of the preliminary effectiveness remained after four regeneration steps.

High interfacial charge separation in visible-light active Z- scheme g-C3N4/MoS2 heterojunction: Mechanism and degradation of sulfasalazine

Examination of highly proficient photoactive materials for the degradation of antibiotics from the aqueous solution is the need of the hour. In the present study, a 2D/2D binary junction GCM, formed between graphitic-carbon nitride (g-C3N4) and molybdenum disulphide (MoS2), was synthesized using facile hydrothermal method and its photo-efficacy was tested for the degradation of sulfasalazine (SUL) from aqueous solution under visible-light irradiation. Morphological analysis indicated the nanosheets arrangement of MoS2 and g-C3N4. The visible-light driven experiments indicated that 97% antibiotic was degraded by GCM-30% within 90 min which was found to be quite high than pristine g-C3N4 and MoS2 at solution pH of 6, GCM-30% dose of 20 mg, and SUL concentration of 20 mgL-1. The degradation performance of GCM-30% was selectively improved due to enhanced visible-light absorption, high charge carrier separation, and high redox ability of the photogenerated charges which was induced by the effective Z-scheme 2D/2D heterojunction formed between g-C3N4 and MoS2. The reactive radicals as determined by the scavenging study were •O2-, and h+. A detailed degradation mechanism of SUL by GCM-30% was also predicted based on the detailed examination of the band gaps of g-C3N4 and MoS2.

Aurivillius Oxides Nanosheets-Based Photocatalysts for Efficient Oxidation of Malachite Green Dye

Aurivillius oxides ferroelectric layered materials are formed by bismuth oxide and pseu-do-perovskite layers. They have a good ionic conductivity, which is beneficial for various photo-catalyzed reactions. Here, we synthesized ultra-thin nanosheets of two different Aurivillius oxides, Bi₂WO₆ (BWO) and Bi₂MoO₆ (BMO), by using a hard-template process. All materials were characterized through XRD, TEM, FTIR, TGA/DSC, DLS/ELS, DRS, UV-Vis. Band gap material (E_g) and potential of the valence band (E_VB) were calculated for BWO and BMO. In contrast to previous reports on the use of multi composite materials, a new procedure for photocatalytic efficient BMO nanosheets was developed. The procedure, with an additional step only, avoids the use of composite materials, improves crystal structure, and strongly reduces impurities. BWO and BMO were used as photocatalysts for the degradation of the water pollutant dye malachite green (MG). MG removal kinetics was fitted with Langmuir—Hinshelwood model obtaining a kinetic constant k = 7.81 × 10⁻² min⁻¹ for BWO and k = 9.27 × 10⁻² min⁻¹ for BMO. Photocatalytic dye degradation was highly effective, reaching 89% and 91% MG removal for BWO and BMO, respectively. A control experiment, carried out in the absence of light, allowed to quantify the contribution of adsorption to MG removal process. Adsorption contributed to MG removal by a 51% for BWO and only by a 19% for BMO, suggesting a different degradation mechanism for the two photocatalysts. The advanced MG degradation process due to BMO is likely caused by the high crystallinity of the material synthetized with the new procedure. Reuse tests demonstrated that both photocatalysts are highly active and stable reaching a MG removal up to 95% at the 10th reaction cycle. These results demonstrate that BMO nanosheets, synthesized with an easy additional step, achieved the best degradation performance, and can be successfully used for environmental remediation applications.