A bioabsorbable (polyglactin), nonrestrictive, external sheath inhibits porcine saphenous vein graft thickening

External Support of Autologous Internal Jugular Vein Grafts with FRAME Mesh in a Porcine Carotid Artery Model

BACKGROUND

Autologous vein grafts are widely used for bypass procedures in cardiovascular surgery. However, these grafts are susceptible to failure due to vein graft disease. Our study aimed to evaluate the impact of the latest-generation FRAME external support on vein graft remodeling in a preclinical model.

METHODS

We performed autologous internal jugular vein interposition grafting in porcine carotid arteries for one month. Four grafts were supported with a FRAME mesh, while seven unsupported grafts served as controls. The conduits were examined through flowmetry, angiography, macroscopy, and microscopy.

RESULTS

The one-month patency rate of FRAME-supported grafts was 100% (4/4), whereas that of unsupported controls was 43% (3/7, Log-rank p = 0.071). On explant angiography, FRAME grafts exhibited significantly more areas with no or mild stenosis (9/12) compared to control grafts (3/21, p = 0.0009). Blood flow at explantation was higher in the FRAME grafts (145 ± 51 mL/min) than in the controls (46 ± 85 mL/min, p = 0.066). Area and thickness of neo-intimal hyperplasia (NIH) at proximal anastomoses were similar for the FRAME and the control groups: 5.79 ± 1.38 versus 6.94 ± 1.10 mm2, respectively (p = 0.558) and 480 ± 95 vs. 587 ± 52 μm2/μm, respectively (p = 0.401). However, in the midgraft portions, the NIH area and thickness were significantly lower in the FRAME group than in the control group: 3.73 ± 0.64 vs. 6.27 ± 0.64 mm2, respectively (p = 0.022) and 258 ± 49 vs. 518 ± 36 μm2/μm, respectively (p = 0.0002).

CONCLUSIONS

In our porcine model, the external mesh FRAME improved the patency of vein-to-carotid artery grafts and protected them from stenosis, particularly in the mid regions. The midgraft neo-intimal hyperplasia was two-fold thinner in the meshed grafts than in the controls.

Periadventitial biomaterials to improve arteriovenous fistula and graft outcomes

Periadventitial biomaterials have been employed for nearly three decades to promote adaptive venous remodeling following hemodialysis vascular access creation in preclinical models and clinical trials. These systems are predicated on the combination of scaffolds, hydrogels, and/or particles with therapeutics (small molecules, proteins, genes, and cells) to prevent venous stenosis and subsequent maturation failure. Periadventitial biomaterial therapies have evolved from simple drug delivery vehicles for traditional drugs to more thoughtful designs tailored to the pathophysiology of access failure. The emergence of tissue engineering strategies and gene therapies are another exciting new direction. Despite favorable results in experimental and preclinical studies, no periadventitial therapy has been clinically approved to improve vascular access outcomes. After conducting an exhaustive review of the literature, we identify the seminal studies and clinical trials that utilize periadventitial biomaterials and discuss the key features of each biomaterial format and their respective shortcomings as they pertain to access maturation. This review provides a foundation from which clinicians, surgeons, biologists, and engineers can refer to and will hopefully inspire thoughtful, translatable treatments to finally address access failure.

Therapeutic strategies based on non-ionizing radiation to prevent venous neointimal hyperplasia: the relevance for stenosed arteriovenous fistula, and the role of vascular compliance

We have reviewed the development and current status of therapies based on exposure to non-ionizing radiation (with a photon energy less than 10 eV) aimed at suppressing the venous neointimal hyperplasia, and consequentially at avoiding stenosis in arteriovenous grafts. Due to the drawbacks associated with the medical use of ionizing radiation, prominently the radiation-induced cardiovascular disease, the availability of procedures using non-ionizing radiation is becoming a noteworthy objective for the current research. Further, the focus of the review was the use of such procedures for improving the vascular access function and assuring the clinical success of arteriovenous fistulae in hemodialysis patients. Following a brief discussion of the physical principles underlying radiotherapy, the current methods based on non-ionizing radiation, either in use or under development, were described in detail. There are currently five such techniques, including photodynamic therapy (PDT), far-infrared therapy, photochemical tissue passivation (PTP), Alucent vascular scaffolding, and adventitial photocrosslinking. The last three are contingent on the mechanical stiffening achievable by the exogenous photochemical crosslinking of tissular collagen, a process that leads to the decrease of venous compliance. As there are conflicting opinions on the role of compliance mismatch between arterial and venous conduits in a graft, this aspect was also considered in our review.

3D Elastomeric Stent Functionalized with Antioxidative and Perivascular Tissue Regenerative Activities Ameliorated PVT Deprivation-Induced Vein Graft Failure

Clinically, arterial injuries are always accompanied with perivascular tissue damage, which may contribute to high failure rate of vein grafts due to intimal hyperplasia and acute thrombosis. In this study, a "perivascular tissue (PVT) deprivation" animal model is constructed to mimic clinical scenarios and identify the contribution of arterial PVT to the success of vein grafts. Proteomics analysis suggests that depriving PVT may exacerbate reactive oxygen species (ROS)-induced endothelial apoptosis by up-regulating inflammation response and oxidative stress. Locally administering metformin on vein grafts through 3D-printed external stent (PGS-PCL) shows antioxidative and anti-inflammatory properties to protect cells from ROS invasion, thereafter decreasing acute thrombosis. Moreover, metformin induce rapid regeneration of perivascular adipose tissue in recipient regions, which improves patency by inhibiting intimal hyperplasia. Proteomics, western blot, and in vitro blocking tests reveal that metformin resists endothelial apoptosis through AMPK/mTOR and NFκB signaling pathways. To conclude, PVT deprivation exacerbates inflammatory response and oxidative stress in vein grafts bridging arterial circulation. Metformin-loaded stent ameliorates "PVT damage" related vein graft failure, and enhances patency of through resisting endothelial apoptosis and regenerating arterial PVAT, offering a promising avenue to improve the success of vein grafts in clinic.

Biodegradable external wrapping promotes favorable adaptation in an ovine vein graft model

Vein grafts, the most commonly used conduits in multi-vessel coronary artery bypass grafting surgery, have high intermediate- and long-term failure rates. The abrupt and marked increase in hemodynamic loads on the vein graft is a known contributor to failure. Recent computational modeling suggests that veins can more successfully adapt to an increase in mechanical load if the rate of loading is gradual. Applying an external wrap or support at the time of surgery is one way to reduce the transmural load, and this approach has improved performance relative to an unsupported vein graft in several animal studies. Yet, a clinical trial in humans has shown benefits and drawbacks, and mechanisms by which an external wrap affects vein graft adaptation remain unknown. This study aims to elucidate such mechanisms using a multimodal experimental and computational data collection pipeline. We quantify morphometry using magnetic resonance imaging, mechanics using biaxial testing, hemodynamics using computational fluid dynamics, structure using histology, and transcriptional changes using bulk RNA-sequencing in an ovine carotid-jugular interposition vein graft model, without and with an external biodegradable wrap that allows loads to increase gradually. We show that a biodegradable external wrap promotes luminal uniformity, physiological wall shear stress, and a consistent vein graft phenotype, namely, it prevents over-distension, over-thickening, intimal hyperplasia, and inflammation, and it preserves mechanotransduction. These mechanobiological insights into vein graft adaptation in the presence of an external support can inform computational growth and remodeling models of external support and facilitate design and manufacturing of next-generation external wrapping devices. STATEMENT OF SIGNIFICANCE: External mechanical support is emerging as a promising technology to prevent vein graft failure following coronary bypass graft surgery. While variants of this technology are currently under investigation in clinical trials, the fundamental mechanisms of adaptation remain poorly understood. We employ an ovine carotid-jugular interposition vein graft model, with and without an external biodegradable wrap to provide mechanical support, and probe vein graft adaptation using a multimodal experimental and computational data collection pipeline. We quantify morphometry using magnetic resonance imaging, mechanics using biaxial testing, fluid flow using computational fluid dynamics, vascular composition and structure using histology, and transcriptional changes using bulk RNA sequencing. We show that the wrap mitigates vein graft failure by promoting multiple adaptive mechanisms (across biological scales).

Large animal model of vein grafts intimal hyperplasia: A systematic review

Coronary artery bypass grafting remains the treatment of choice for a large cohort of patients with significant coronary disease. Despite the increased use of arterial grafts, the long saphenous vein remains the most commonly used conduit. Long-term graft patency continues to be the Achilles heel of saphenous vein grafts. This is due to the development of intimal hyperplasia, a chronic inflammatory disease that results in the narrowing and occlusion of a significant number of vein grafts. Research models for intimal hyperplasia are essential for a better understanding of pathophysiological processes of this condition. Large animal models resemble human anatomical structures and have been used as a surrogate to study disease development and prevention over the years. In this paper, we systematically review all published studies that utilized large animal models of vein graft disease with a focus on the type of model and any therapeutic intervention, specifically the use of external stents/mesh.

Time-dependent pathobiological and physiological changes of implanted vein grafts in a canine model

Although autologous vein grafting is essential, the high vein failure rate and specific clinical interventions are not clear, so a potential treatment is critically needed; thus, complex analyses of the relationship between pathobiological and physiological processes in preclinical are essential. The interposition of the femoral vein was performed in a canine model. Maximized expansion and velocity were measured at 8 weeks post-implantation, and a relative decrease was observed at 12 weeks. However, NI formation and NI/Media ratio significantly increased time dependently, and differences between the mechanical properties were observed. Additionally, RhoA-mediated TNF-α induced by rapid structural changes and high shear stress was confirmed. After adaptation to the arterial environment, vascular remodeling occurred by SMC proliferation and differentiation, apoptosis and autophagy were induced through YAP activity without vasodilation and RhoA activity. Our results show that understanding pathobiological processes in which time-dependent physiological changes contribute to vein failure can lead to a potential strategy. The implanted vein graft within the arterial environment undergoes pathobiological processes through RhoA and YAP activity, leading to pathophysiological changes.

Device Profile of the VEST for External Support of SVG Coronary Artery Bypass Grafting: Historical Development, Current Status and Future Directions

A search for strategies to address saphenous vein graft (SVG) failure - the main factor limiting the long-term success of coronary bypass grafting - has led to trialing of external stenting technologies.

AREAS COVERED

The manuscript covers historical development and current status of external scaffolding for the treatment of SVG intimal hyperplasia. Comprehensive literature review and personal communication with VGS leadership, the developer of the VEST device, served as the sources.

EXPERT OPINION

If the external scaffolding concept proves to be successful in mitigating the intimal hyperplasia inherent to arterialized saphenous vein conduits, it could have a dramatic impact on the recurrence of anginal symptoms, the need for repeat revascularization, and the incidence of myocardial infarction following CABG surgery. These laudable sequelae could ultimately convey significant public health repercussions by reducing healthcare resource use and improving the long-term survival and quality of life of CABG recipients.

Effect of pore size and spacing on neovascularization of a biodegradble shape memory polymer perivascular wrap

Neointimal hyperplasia (NH) is a main source of failures in arteriovenous fistulas and vascular grafts. Several studies have demonstrated the promise of perivascular wraps to reduce NH via promotion of adventitial neovascularization and providing mechanical support. Limited clinical success thus far may be due to inappropriate material selection (e.g., nondegradable, too stiff) and geometric design (e.g., pore size and spacing, diameter). The influence of pore size and spacing on implant neovascularization is investigated here for a new biodegradable, thermoresponsive shape memory polymer (SMP) perivascular wrap. Following an initial pilot, 21 mice were each implanted with six scaffolds: four candidate SMP macroporous designs (a-d), a nonporous SMP control (e), and microporous GORETEX (f). Mice were sacrificed after 4 (N = 5), 14 (N = 8), and 28 (N = 8) days. There was a statistically significant increase in neovascularization score between all macroporous groups compared to nonporous SMP (p < .023) and microporous GORETEX (p < .007) controls at Day 28. Wider-spaced, smaller-sized pore designs (223 μm-spaced, 640 μm-diameter Design c) induced the most robust angiogenic response, with greater microvessel number (p < .0114) and area (p < .0055) than nonporous SMPs and GORETEX at Day 28. This design also produced significantly greater microvessel density than nonporous SMPs (p = 0.0028) and a smaller-spaced, larger-sized pore (155 μm-spaced, 1,180 μm-sized Design b) design (p = .0013). Strong neovascularization is expected to reduce NH, motivating further investigation of this SMP wrap with controlled pore spacing and size in more advanced arteriovenous models.

Inhibition of Lysyl Oxidase with β-aminopropionitrile Improves Venous Adaptation after Arteriovenous Fistula Creation

BACKGROUND

The arteriovenous fistula (AVF) is the preferred hemodialysis access for end-stage renal disease (ESRD) patients. Yet, establishment of a functional AVF presents a challenge, even for the most experienced surgeons, since postoperative stenosis frequently occludes the AVF. Stenosis results from the loss of compliance in fibrotic areas of the fistula which turns intimal hyperplasia into an occlusive feature. Fibrotic remodeling depends on deposition and crosslinking of collagen by lysyl oxidase (LOX), an enzyme that catalyzes the deamination of lysine and hydroxylysine residues, facilitating intra/intermolecular covalent bonds. We postulate that pharmacological inhibition of lysyl oxidase (LOX) increases postoperative venous compliance and prevents stenosis in a rat AVF model.

METHODS

LOX gene expression and vascular localization were assayed in rat AVFs and human pre-access veins, respectively. Collagen crosslinking was measured in humans AVFs that matured or failed, and in rat AVFs treated with β-aminopropionitrile (BAPN), an irreversible LOX inhibitor. BAPN was either injected systemically or delivered locally around rat AVFs using nanofiber scaffolds. The major endpoints were AVF blood flow, wall fibrosis, collagen crosslinking, and vascular distensibility.

RESULTS

Non-maturation of human AVFs was associated with higher LOX deposition in pre-access veins (N=20, P=0.029), and increased trivalent crosslinks (N=18, P=0.027) in human AVF tissues. Systemic and local inhibition of LOX increased AVF distensibility, while reducing wall fibrosis and collagen crosslinking in rat fistulas.

CONCLUSIONS

Our results demonstrate that BAPN-mediated inhibition of LOX significantly improves vascular remodeling in experimental fistulas.

Vascular adaptation in the presence of external support - A modeling study

Vascular grafts have long been used to replace damaged or diseased vessels with considerable success, but a new approach is emerging where native vessels are merely supported, not replaced. Although external supports have been evaluated in diverse situations - ranging from aneurysmal disease to vein grafts or the Ross operation - optimal supports and procedures remain wanting. In this paper, we present a novel application of a growth and remodeling model well suited for parametrically exploring multiple designs of external supports while accounting for mechanobiological and immunobiological responses of the supported native vessel. These results suggest that a load bearing external support can reduce vessel thickening in response to pressure elevation. Results also suggest that the final adaptive state of the vessel depends on the structural stiffness of the support via a mechano-driven adaptation, although luminal encroachment may be a complication in the presence of chronic inflammation. Finally, the supported vessel can stiffen (structurally and materially) along circumferential and axial directions, which could have implications on overall hemodynamics and thus subsequent vascular remodeling. The proposed framework can provide valuable insights into vascular adaptation in the presence of external support, accelerate rational design, and aid translation of this emerging approach.

A novel biodegradable external stent regulates vein graft remodeling via the Hippo-YAP and mTOR signaling pathways

Coronary artery bypass graft (CABG) has been confirmed to effectively improve the prognosis of coronary artery disease, which is a major public health concern worldwide. As the most frequently used conduits in CABG, saphenous vein grafts have the disadvantage of being susceptible to restenosis due to intimal hyperplasia. To meet the urgent clinical demand, adopting external stents (eStents) and illuminating the potential mechanisms underlying their function are important for preventing vein graft failure. Here, using 4-axis printing technology, we fabricated a novel biodegradable and flexible braided eStent, which exerts excellent inhibitory effect on intimal hyperplasia. The stented grafts downregulate Yes-associated protein (YAP), indicating that the eStent regulates vein graft remodeling via the Hippo-YAP signaling pathway. Further, as a drug-delivery vehicle, a rapamycin (RM)-coated eStent was designed to amplify the inhibitory effect of eStent on intimal hyperplasia through the synergistic effects of the Hippo and mammalian target of rapamycin (mTOR) signaling pathways. Overall, this study uncovers the underlying mechanisms of eStent function and identifies a new therapeutic target for the prevention of vein graft restenosis.

Effects of the different-sized external stents on vein graft intimal hyperplasia and inflammation

Background

The poor long-term patency ratio of vein grafts prevents patients from benefiting from coronary artery bypass graft (CABG). It is reported that external venous stents have notably improved the patency ratio of stented vein grafts in animal models. The most crucial influence on stented grafts' fate is the size of the stents. This study aims to investigate the effects on intimal hyperplasia and inflammation of vein graft by using different sizes of stents and explore the potential mechanism.

Methods

Two different sizes of external stents were fabricated through 3D printing technology. Male SD rats were divided into three groups. In the control group rat's autologous left jugular vein was grafted on the ipsilateral artery directly. In the stent groups, grafts were surrounded by two different-sized stents before anastomosing with arteries. The patency ratio and diameter of the grafts were examined by ultrasound. Masson staining was used to characterize intimal hyperplasia. The expression of inflammatory factors was detected by immunohistochemical staining. Moreover, TUNEL staining was used to label apoptotic cells.

Results

The two sizes of external stents were fabricated by 3D printing technology. In the control group, the intima area and wall thickness dramatically increased 8 weeks after implantation. While in the stent groups, these data only slightly increased, especially in the 1.5 mm-stent group. The expressions of inflammatory factors in TNF signaling were more remarkable than in the control group. On the contrary, the expressions were rarely detected in the stent groups. Similarly, the number of TUNEL positive cells dramatically decreased by using the appropriate-sized stent.

Conclusions

In this study, we concluded that the appropriate sizes of external stents could effectively inhibit vein graft neointima formation, attenuate inflammatory reaction and reduce cell apoptosis, which might improve the long-term patency ratio of vein grafts.

Perivascular medical devices and drug delivery systems: Making the right choices

Perivascular medical devices and perivascular drug delivery systems are conceived for local application around a blood vessel during open vascular surgery. These systems provide mechanical support and/or pharmacological activity for the prevention of intimal hyperplasia following vessel injury. Despite abundant reports in the literature and numerous clinical trials, no efficient perivascular treatment is available. In this review, the existing perivascular medical devices and perivascular drug delivery systems, such as polymeric gels, meshes, sheaths, wraps, matrices, and metal meshes, are jointly evaluated. The key criteria for the design of an ideal perivascular system are identified. Perivascular treatments should have mechanical specifications that ensure system localization, prolonged retention and adequate vascular constriction. From the data gathered, it appears that a drug is necessary to increase the efficacy of these systems. As such, the release kinetics of pharmacological agents should match the development of the pathology. A successful perivascular system must combine these optimized pharmacological and mechanical properties to be efficient.

Biomaterial-Based Approaches to Address Vein Graft and Hemodialysis Access Failures

Veins used as grafts in heart bypass or as access points in hemodialysis exhibit high failure rates, thereby causing significant morbidity and mortality for patients. Interventional or revisional surgeries required to correct these failures have been met with limited success and exorbitant costs, particularly for the US Centers for Medicare & Medicaid Services. Vein stenosis or occlusion leading to failure is primarily the result of neointimal hyperplasia. Systemic therapies have achieved little long-term success, indicating the need for more localized, sustained, biomaterial-based solutions. Numerous studies have demonstrated the ability of external stents to reduce neointimal hyperplasia. However, successful results from animal models have failed to translate to the clinic thus far, and no external stent is currently approved for use in the US to prevent vein graft or hemodialysis access failures. This review discusses current progress in the field, design considerations, and future perspectives for biomaterial-based external stents. More comparative studies iteratively modulating biomaterial and biomaterial-drug approaches are critical in addressing mechanistic knowledge gaps associated with external stent application to the arteriovenous environment. Addressing these gaps will ultimately lead to more viable solutions that prevent vein graft and hemodialysis access failures.

Administration of perivascular cyanoacrylate for the prevention of cellular damage in saphenous vein grafts: an experimental model

Objective:

The saphenous vein is the most commonly used graft in coronary artery bypass surgery, since no suitable arterial graft is available. However, the frequency of late graft failure is a cause for research into graft protection. The objective of this study was to investigate the effect of synthetic adhesive cyanoacrylate administration on the saphenous vein graft for preventing vascular damage due to internal pressure on the graft.

Methods:

In this study we enrolled 20 volunteer subjects who had undergone coronary artery bypass surgery and who had excess saphenous vein grafts. Perivascular cyanoacrylate was administered to one of two saphenous vein grafts explanted from each patient. The other saphenous vein graft from each patient was not treated and was used as the control. A model of the arterial system was created using a saphenous vein cardiopulmonary bypass system. Circulation was maintained at 120 mmHg for 45 minutes. Afterwards, the grafts were subjected to histopathological examination.

Results:

The cyanoacrylate group of grafts did not develop severe vascular damage compared with many instances of moderate and severe damage due to compression in the control group of grafts (p = 0.003).

Conclusion

Perivascular administration of cyanoacrylate appeared to be successful in the prevention of early saphenous vein graft injury. No in vivo study has been performed to date to assess endothelial damage in the saphenous vein, in order to demonstrate the long-term effect of cyanoacrylate. Further investigations are needed in this regard.

A new design concept for knitted external vein-graft support mesh

Autologous vein-graft failure significantly limits the long-term efficacy of coronary artery bypass procedures. The major cause behind this complication is biomechanical mismatch between the vein and coronary artery. The implanted vein experiences a sudden increase (10-12 fold) in luminal pressures. The resulting vein over-distension or 'ballooning' initiates wall thickening phenomenon and ultimate occlusion. Therefore, a primary goal in improving the longevity of a coronary bypass procedure is to inhibit vein over-distension using mechanical constriction. The idea of using an external vein-graft support mesh has demonstrated sustained benefits and wide acceptance in experimental studies. Nitinol based knitted structures have offered more promising mechanical features than other mesh designs owing to their unique loosely looped construction. However, the conventional plain knit construction still exhibits limitations (radial compliance, deployment ease, flexibility, and bending stresses) which limit this design from proving its real clinical advantage. The new knitted mesh design presented in this study is based on the concept of composite knitting utilising high modulus (nitinol and polyester) and low modulus (polyurethane) material components. The experimental comparison of the new design with a plain knit design demonstrated significant improvement in biomechanical (compliance, flexibility, extensibility, viscoelasticity) and procedural (deployment limit) parameters. The results are indicative of the promising role of new mesh in restoring the lost compliance and pulsatility of vein-graft at high arterial pressures. This way it can assist in controlled vein-graft remodelling and stepwise restoration of vein mechanical homoeostasis. Also, improvement in deployment limit parameter offers more flexibility for a surgeon to use a wide range of vein diameters, which may otherwise be rendered unusable for a plain knit mesh.

External support in preventing vein graft failure

Saphenous vein remains a widely used conduit in coronary surgery. However, the long-term success of surgical myocardial revascularization is largely limited by the development of neointimal hyperplasia and superimposed atherosclerosis in vein grafts. Although strategies for preventing vein graft failure have been constantly explored, few therapeutic interventions to date have shown sustained benefits in the clinical setting. The application of external support has emerged as a promising strategy for modulating the overall biomechanical responses in venous wall. Nonetheless, clinical translation of this intervention has been formerly challenged, primarily due to several technique limitations. The purpose of the current review is to summarize the possible mechanisms involved in the external support strategy for preventing vein graft failure. Furthermore, several previously tested biomaterials and delivery techniques are also highlighted.

'No-touch' saphenous vein harvesting improves graft performance in patients undergoing coronary artery bypass surgery: a journey from bedside to bench

The saphenous vein is the most commonly used conduit in patients undergoing coronary artery bypass surgery yet its patency is inferior to the internal thoracic artery. Vascular damage inflicted to the vein when using conventional harvesting techniques affects its structure. Endothelial denudation is associated with early vein graft failure while damage of the outermost vessel layers has adverse long-term effects on graft performance. While many in vitro and in vivo experimental studies aimed at improving vein graft patency have been performed to date no significant 'bench to bedside' advances have been made. Among experimental strategies employed is the use of pharmacological agents, gene targeting and external stents. A 'no-touch' technique, where the saphenous vein is removed with minimal trauma and normal architecture preserved, produces a superior graft with long term patency comparable to the internal thoracic artery. Interestingly, many experimental studies are aimed at repairing or replacing those regions of the saphenous vein damaged when harvesting conventionally. 'No-touch' harvesting is superior in coronary artery bypass patients with long-term data published 5years ago. Here we describe a 'bedside to bench' situation where the mechanisms underlying the improved performance of 'no touch' saphenous vein grafts in patients have been studied in the laboratory.

Pathophysiology of saphenous vein graft failure: a brief overview of interventions

Coronary artery bypass graft surgery (CABG) is widely used for the treatment of atheromatous stenosis of coronary arteries. However, as many as 50% of grafts fail within 10 years after CABG due to neointima (NI) formation, a process involving the proliferation of vascular smooth muscle cells (VSMCs) and superimposed atherogenesis. To date no therapeutic intervention has proved successful in treating late vein graft failure. However, several diverse approaches aimed at preventing neointimal formation have been devised which have yielded promising results. In this review, therefore, we will summarise the pathophysiology of vein graft disease and then briefly consider interventional approaches to prevent late vein graft failure which include surgical technique, conventional pharmacology, external sheaths, cytostatic drugs and gene transfer.

Animal models for studying vein graft failure and therapeutic interventions

Vein grafts have been extensively used to bypass blockages in arteries, but are themselves subject to early closure by thrombosis or later obstruction by vein graft disease (neointimal hyperplasia and remodelling). Animal models are a crucial means of testing potential therapeutic and surgical interventions to prevent graft stenosis and occlusion. This review outlines many of the animal models of vein grafting. Recent studies include targeted gene therapy to prevent acute vein graft thrombosis and the use of folic acid to limit graft failure in diabetic pigs.

Sustained reduction of vein graft neointima formation by ex vivo TIMP-3 gene therapy

BACKGROUND

Coronary artery vein graft failure, resulting from thrombosis, intimal thickening, and atherosclerosis, is a significant clinical problem, with approximately 50% of vein grafts failing within 10 years. Intimal thickening is caused by migration of vascular smooth muscle cells from the media to the intima, where they proliferate. Interventions using gene transfer to inhibit vascular smooth muscle cells proliferation and migration are attractive because ex vivo access to the graft is possible. The involvement of matrix-degrading metalloproteinases in intimal thickening is well established, and we previously showed that adenoviral-delivered overexpression of an endogenous inhibitor, the tissue inhibitor of metalloproteinases-3 (TIMP-3), significantly retarded intimal thickening in short-term autologous porcine arteriovenous interposition grafts (28 days). However, it is essential to determine whether this approach will provide longer-term benefits.

METHODS AND RESULTS

We assessed whether a recombinant adenovirus that overexpresses TIMP-3 (RAdTIMP-3) affects vein graft intimal thickening in the longer term (at 3 months). Porcine saphenous veins were subjected to luminal infection with 2.5×10(10) pfu/mL RAdTIMP-3 or RAd60 (control virus) or vehicle control, for 30 minutes before implantation into the carotid artery. Analysis of grafts harvested 3 months after delivery revealed that RAdTIMP-3-infected grafts had significantly reduced intimal areas compared with both controls (3.2 ± 0.4 mm(2) versus 5.6 ± 0.7 mm(2) and 5.9 ± 0.5 mm(2), RAdTIMP-3, RAd60, and vehicle, respectively). Medial areas were also significantly decreased by TIMP-3 (3.8 ± 0.3 mm(2) versus 6.7 ± 1.0 mm(2) and 5.2 ± 0.4 mm(2), RAdTIMP-3, RAd60, and vehicle, respectively).

CONCLUSIONS

Overexpression of TIMP-3 provides a sustained retardation of vein graft intimal thickening and highlights the translational potential for ex vivo TIMP-3 gene therapy.

A Periadventitial Sirolimus-Releasing Mesh Decreased Intimal Hyperplasia in a Rabbit Model

Autologous vein grafts used as aortocoronary bypasses are often prone to intimal hyperplasia, which results in stenosis and occlusion of the vein. The aim of this study was to prevent intimal hyperplasia using a newly developed perivascular system with sustained release of sirolimus. This system of controlled drug release consists of a polyester mesh coated with a copolymer of L-lactic acid and ε-caprolactone that releases sirolimus. The mesh is intended for wrapping around the vein graft during surgery. The mesh releasing sirolimus was implanted in periadventitial position onto arteria carotis communis of rabbits, and neointimal hyperplasia was then assessed. We found that implanted sirolimus-releasing meshes reduced intima thickness by 47±10 % compared to a vein graft after 3 weeks. The pure polyester mesh decreased vein intima thickness by 35±9 %. Thus, our periadventitial system for controlled release of sirolimus prevented the development of intimal hyperplasia in autologous vein grafts in vivo in rabbits. A perivascularly applied mesh releasing sirolimus is a promising device for preventing stenosis of autologous vein grafts.

Mechanisms of vein graft adaptation to the arterial circulation: insights into the neointimal algorithm and management strategies

For patients with coronary artery disease or limb ischemia, placement of a vein graft as a conduit for a bypass is an important and generally durable strategy among the options for arterial reconstructive surgery. Vein grafts adapt to the arterial environment, and the limited formation of intimal hyperplasia in the vein graft wall is thought to be an important component of successful vein graft adaptation. However, it is also known that abnormal, or uncontrolled, adaptation may lead to abnormal vessel wall remodeling with excessive neointimal hyperplasia, and ultimately vein graft failure and clinical complications. Therefore, understanding the venous-specific pathophysiological and molecular mechanisms of vein graft adaptation are important for clinical vein graft management. Of particular importance, it is currently unknown whether there exist several specific distinct molecular differences in the venous mechanisms of adaptation that are distinct from arterial post-injury responses; in particular, the participation of the venous determinant Eph-B4 and the vascular protective molecule Nogo-B may be involved in mechanisms of vessel remodeling specific to the vein. This review describes (1) venous biology from embryonic development to the mature quiescent state, (2) sequential pathologies of vein graft neointima formation, and (3) novel candidates for strategies of vein graft management. Scientific inquiry into venous-specific adaptation mechanisms will ultimately provide improvements in vein graft clinical outcomes.

Inhibition of neointimal formation and hyperplasia in vein grafts by external stent/sheath

Synthetic and to a lesser extent vein graft failure is still a major problem in the treatment of peripheral arterial disease, with neointimal hyperplasia being the main cause for graft occlusion in the medium and long term. This review aims to establish the current status of external stents or sheaths in the prevention of intimal hyperplasia in small diameter (< 6 mm) vein grafts.

Dimensional analysis of human saphenous vein grafts: Implications for external mesh support

OBJECTIVE

Constrictive external mesh support of vein grafts was shown to mitigate intimal hyperplasia in animal experiments. To determine the degree of constriction required for the elimination of dimensional irregularities in clinically used vein grafts, a detailed anatomic study of human saphenous veins was conducted.

METHODS

In 200 consecutive patients having coronary artery bypass grafting, harvested saphenous veins (length 34.4 +/- 10.8 cm) were analyzed regarding diameter irregularities, side branch distribution, and microstructure.

RESULTS

The mean outer diameter of surgically distended saphenous veins was 4.2 +/- 0.6 mm (men, 4.3 +/- 0.6 mm vs women, 3.9 +/- 0.5 mm; P < .0001). Although the outer diameter significantly decreased over the initial 18 cm (-7.6%; P < .0001), the overall increase between malleolus and thigh was not significant (+11.2%). Smaller-diameter veins (<3.5 mm) had more pronounced diameter fluctuations than larger veins (31.8% +/- 11.0% vs 21.2% +/- 8.8%; P < .0001), with more than 71% of all veins showing caliber changes of more than 20%. There was 1 side branch every 5.4 +/- 4.3 cm, with a significantly higher incidence between 20 and 32 cm from the malleolus (P < .0001 to distal, P < .0004 to proximal). Generally, women had more side branches than men (0.30 +/- 0.15 cm(-1) vs 0.25 +/- 0.12 cm(-1); P = .0190). Thick-walled veins (565.7 +/- 138.4 mum) had a significantly higher number of large side branches (P < .0001), and thin-walled veins (398.7 +/- 123.2 mum) had significantly more small side branches (P < .0001). Pronounced intimal thickening ("cushions") was found in 28% of vessels (119.8 +/- 28.0 mum vs 40.1 +/- 18.2 mum; P < .0001).

CONCLUSION

Although the preferential location of side branches may be addressed by the deliberate discarding of infragenicular vein segments, a diameter constriction of 27% on average would eliminate diameter irregularities in 98% of vein grafts.

Extravascular perivenous fibrin support leads to aneurysmal degeneration and intimal hyperplasia in arterialized vein grafts in the rat

BACKGROUND AND AIMS

External support of vein grafts by fibrin glue possibly prevents overdistension, vascular remodeling, and neointimal hyperplasia. Previous animal models of neointimal hyperplasia showed conflicting results. Here, long-term effects of external fibrin glue support were studied in a new rat model of jugular vein to abdominal aorta transposition. MATERIALS AND METHODS AND METHODS: In male Wistar rats (250-300 g) right jugular vein (1.0-1.5 cm) was transposed to the infrarenal aorta. Fibrin glue (0.25 ml) covered the vein before releasing the vascular clamps (n = 6). Control vein grafts were exposed directly to blood pressure. After 16 weeks vein grafts were pressure-fixed for histology. Intima thickness, luminal and intimal area were measured by planimetry and elastic fibers demonstrated by Elastica van Giesson staining.

RESULTS

Intimal thickness (74.04 +/- 6.7 microm vs 1245 +/- 187 microm, control vs fibrin treatment; p < 0.001), intimal area (2517.16 +/- 355 mm(2) vs 18424 +/- 4927 mm(2), control vs fibrin treatment; p < 0.05) and luminal area (2184.75 +/- 347 mm(2) vs 7231.85 +/- 1782 mm(2), control vs fibrin treatment; p < 0.05) were significantly increased, elastic fibers in the vessel wall were diminished and the vessel wall infiltrated by mononuclear cells in fibrin glue supported veins.

CONCLUSION

External support of vein grafts by fibrin glue leads to aneurysmal degeneration and intimal hyperplasia, thereby possibly jeopardizing long-term graft patency.

Transient elastic support for vein grafts using a constricting microfibrillar polymer wrap

Arterial vein grafts (AVGs) often fail due to intimal hyperplasia, thrombosis, or accelerated atherosclerosis. Various approaches have been proposed to address AVG failure, including delivery of temporary mechanical support, many of which could be facilitated by perivascular placement of a biodegradable polymer wrap. The purpose of this work was to demonstrate that a polymer wrap can be applied to vein segments without compromising viability/function, and to demonstrate one potential application, i.e., gradually imposing the mid-wall circumferential wall stress (CWS) in wrapped veins exposed to arterial levels of pressure. Poly(ester urethane)urea, collagen, and elastin were combined in solution, and then electrospun onto freshly-excised porcine internal jugular vein segments. Tissue viability was assessed via Live/Dead staining for necrosis, and vasomotor challenge with epinephrine and sodium nitroprusside for functionality. Wrapped vein segments were also perfused for 24h within an ex vivo vascular perfusion system under arterial conditions (pressure = 120/80 mmHg; flow = 100 mL/min), and CWS was calculated every hour. Our results showed that the electrospinning process had no deleterious effects on tissue viability, and that the mid-wall CWS vs. time profile could be dictated through the composition and degradation of the electrospun wrap. This may have important clinical applications by enabling the engineering of an improved AVG.

On the biology of saphenous vein grafts fitted with external synthetic sheaths and stents

Autologous saphenous vein is used as a conduit to bypass atherosclerotic lesions in both the coronary artery (coronary artery bypass graft surgery [CABG]) and in femoral arteries (infrainguinal bypass graft surgery [IIBS]). Despite the undoubted success and benefits of the procedures, graft failure occurs in 50% of cases within 10 years after surgery. A principal cause of late vein graft failure is intimal and medial hyperplasia and superimposed atherogenesis. Apart from lipid lowering therapy, no intervention has hitherto proved clinically effective in preventing late vein graft failure which clearly constitutes a major clinical and economic problem that needs to be urgently resolved. However, we have studied the effect of external synthetic stents and sheaths in pig models of vein into artery interposition grafting and found them to have a profound effect on vein graft remodelling and thickening. In this review, therefore, we will summarise the mechanisms underlying vein graft failure and how these stents influence these processes and the possible mechanisms involved as well as the application of these devices in preventing vein graft failure clinically.

Perivenous Application of Fibrin Glue as External Support Enhanced Adventitial Adenovirus Transfection in Rabbit Model

BACKGROUND

Placement of an external support has been reported to prevent intimal hyperplasia of vein grafts. However, it's application limited by potential complications. Peri-adventitial gene delivery is a promising alternative therapy to reduce intimal hyperplasia, but it is limited by low and transient levels of gene transfection. To get more effective inhibition of intimal hyperplasia and to avoid the limitations associated with these two approaches, a study was undertaken to investigate whether mixing adenovirus with fibrin glue may increase the level and prolong the time period of gene expression.

METHODS

Right jugular vein to common carotid artery interposition grafting was performed in 36 male New Zealand white rabbits (2.5-3.0 kg) and the animals were divided into four groups: control group (n = 6); fibrin glue group (n = 6); Ad-GAL group (n = 12); fibrin glue/Ad-GAL group (n = 12). Commercially available fibrin glue and adenovirus expressing the gene for beta-galactosidase (Ad-GAL) was applied separately or in mixing around vein grafts. At 7th day and 14th day after implantation, the grafts were harvested to evaluate transfection rate. At 28th day the grafts were harvested for morphometric analysis.

RESULTS

Compared with weak staining in 2.1 +/- 0.5% in Ad-GAL alone grafts, a high level of beta-Galactosidase staining was evident in 13.2 +/- 4.6% in fibrin glue/Ad-GAL grafts at 7th day (P < 0.001). At 14th day, almost no staining (0%) was detected in Ad-GAL alone grafts. However, there was still a relative high level staining (6.3 +/- 3.8%) in fibrin glue/Ad-GAL grafts (P < 0.001 versus Ad-GAL alone group). At 28th day, a statistically significantly decrease in neointimal area (0.68 +/- 0.06 mm(2)versus 1.00 +/- 0.08 mm(2), P < 0.05) was shown in fibrin glue grafts compared with unsupported vein grafts (control group). The same statistically significantly difference was also existed in fibrin glue/Ad-GAL group and unsupported group in neointimal area (0.66 +/- 0.07 mm(2), P < 0.05).

CONCLUSIONS

A novel method of adventitial gene delivery using fibrin glue as external support is proposed. Fibrin glue may be an ideal candidate for controlled release delivery that would facilitate adventitial gene transfer.

Long-term reduction of medial and intimal thickening in porcine saphenous vein grafts with a polyglactin biodegradable external sheath

OBJECTIVES

The development of neointimal hyperplasia with subsequent atherosclerotic deposition has been proposed to cause most late vein graft failures. Our unit has previously demonstrated that placement of a macroporous, loose-fitting polyester external stent prevents neointimal thickening in porcine vein grafts, and has been proposed as a therapeutic strategy to prevent late vein graft failure. To reduce any potential long-term complications of the permanent polyester stent, a study was undertaken to investigate the effect of a biodegradable external stent on porcine vein graft thickening at 1 month and to identify its longer term effects at 6 months.

METHODS

Bilateral saphenous vein to common carotid artery interposition grafting was performed in Large White pigs (25-32 kg; n = 6 per time course group) according to UK Home Office guidelines. A commercially constructed loose-fitting 8-mm-diameter polyglactin stent was placed externally around the vein graft on one side, and the contralateral side remained unstented to serve as control. The external stent was designed to biodegrade and hence disappear within 90 days. Grafts were left in situ for 1 month in 1 group of animals, and for up to 6 months in the other group, before explantation. Graft morphometric features were assessed with computer-aided planimetry.

RESULTS

At 1 month the vein grafts fitted with the polyglactin stent demonstrated a statistically significant decrease in neointimal thickening (0.038 mm; interquartile range [IQR], 0.035-0.039 mm) compared with the unstented control grafts (0.13 mm; IQR; 0.11-0.19; P = .0012), and also in medial thickening (0.09 mm; IQR, 0.086-0.093) compared with unsheathed control grafts (0.302 mm; IQR, 0.272-0.414; P = .0012). The 6-month polyglactin stented grafts also demonstrated a statistically significant reduction in neointimal thickening (0.049 mm; IQR, 0.047-0.07; P = .0012) compared with control grafts (0.178 mm; IQR, 0.164-0.19), and also in medial thickening (0.105 mm; IQR, 0.095-0.143) compared with unstented grafts (0.421 mm; IQR, 0.35-0.44; P = .0012, Mann-Whitney U test).

CONCLUSION

The loose-fitting biodegradable polyglactin external stent reduces porcine vein graft thickening at 1 month, which persists in the long term, even after degradation of the stent itself. This effective removal of the stent may therefore reduce the long-term risks for infection and mechanical complications associated with implanted prosthetic material while still eliciting the primary objective of preventing graft thickening over the long term. Biodegradable external stents therefore have potential advantages over permanent stent material in clinical application.

CLINICAL RELEVANCE

Arteriovenous bypass graft failure has a huge economic effect on health care resources, and a devastating effect o the patient. The attenuation of vein wall thickening, with subsequent luminal narrowing and occlusion, is a major goal in improving the longevity of the venous graft, to reduce secondary percutaneous and surgical interventions. The biodegradable external stent demonstrated in this study has possible clinical applications in bypass procedures with autogenous venous tissue, and represents a novel approach to ameliorating the problem of intimal hyperplasia that plagues these grafts.