Preparation and characterization of a diatomite hybrid microfiltration carbon membrane for oily wastewater treatment

Highly efficient removal of emulsified oil from oily wastewater by microfiltration carbon membranes made from phenolic resin/coal

Oily wastewater treatment is a major problem for a large variety of industrial sectors. Membrane filtration is quite promising for oil-in-water emulsion treatment by virtue of numerous eminent advantages. Here, microfiltration carbon membranes (MCMs) were prepared by the blends of phenolic resin (PR)/coal as precursor materials for efficient removal of emulsified oil from oily wastewater. The functional groups, porous structure, microstructure, morphology and hydrophilicity of the MCMs were analysed by Fourier transform infrared spectroscopy, bubble-pressure method, X-ray diffraction, scanning electron microscope and water contact angle, respectively. The effect of coal amount in precursor materials on the structure and properties of MCMs was mainly investigated. Under operation at 0.02 MPa for trans-membrane pressure and 6 mL min-1 for feed flowrate, the optimal oil rejection and water permeation flux are correspondingly attained to 99.1% and 21,388.5 kg m-2 h-1 MPa-1 for MCMs made by the precursor containing 25% coal. Besides, the anti-fouling ability of the as-prepared MCMs is greatly improved in comparison with the one merely made by PR. In summary, the result indicates that the as-prepared MCMs are very promising for oily wastewater treatment.

Constructing a composite microfiltration carbon membrane by TiO2 and Fe2O3 for efficient separation of oil-water emulsions

Membrane-based separation technology has attracted enormous attention for oil/water emulsion treatment. Here, composite microfiltration carbon membranes (MCMs) were prepared from the precursor of phenolic resin doping with TiO2 and Fe2O3 via the processes of stereotype and pyrolysis. The functional groups, thermal stability, porous structure, microstructure, morphology, and hydrophilicity of the membrane samples were analyzed by Fourier-transform infrared spectroscopy, thermogravimetric analysis, bubble pressure method, X-ray diffraction, scanning electron microscope, and water contact angle, respectively. The effect of dopant amount on the separation performance of MCMs was investigated. The results show that a mixed matrix system is constructed by TiO2 and Fe2O3 in MCMs, which is beneficial for further optimizing the pore size, porosity, and hydrophilicity of MCMs for oily wastewater treatment by varying the dopant amount. The maximum oil rejections are achieved at 98.9% and 99.6% for MCMs with a dopant content of TiO2 and Fe2O3 at 25%, respectively. In brief, this study offers an attractive strategy for improving the separation performance of MCMs for oily wastewater.

3D Natural Mesoporous Biosilica-Embedded Polysulfone Made Ultrafiltration Membranes for Application in Separation Technology

Diatoms are the most abundant photosynthetic microalgae found in all aquatic habitats. In the extant study, the spent biomass (after lipid extraction) of the centric marine diatom Thalassiosira lundiana CSIRCSMCRI 001 was subjected to acid digestion for the extraction of micro composite inorganic biosilica. Then, the resulting three-dimensional mesoporous biosilica material (diatomite) was used as a filler in polysulfone (PSF) membrane preparation by phase inversion. The fabricated PSF/diatomite composite membranes were characterized by SEM-EDX, TGA, and ATR-IR, and their performances were evaluated. The number of pores and pore size were increased on the membrane surface with increased diatomite in the composite membranes as compared to the control. The diatomite composite membranes had high hydrophilicity and thermal stability, lower surface roughness, and excellent water permeability. Membranes with high % diatomite, i.e., PSF/Dia_0.5, had a maximum water flux of 806.8 LMH (Liter/m²/h) at 20 psi operating pressure. High-diatomite content membranes also exhibited the highest rejection of BSA protein (98.5%) and rhodamine 6G (94.8%). Similarly, in biomedical rejection tests, the PSF/Dia_0.5 membrane exhibited a maximum rejection of ampicillin (75.84%) and neomycin (85.88%) at 20 Psi pressure. In conclusion, the mesoporous inorganic biosilica material was extracted from spent biomass of diatom and successfully used in filtration techniques. The results of this study could enhance the application of natural biogenic porous silica materials in wastewater treatment for water recycling.

Synthesis, characterization of cellulose acetate membrane and application for the treatment of oily wastewater

This study reports the synthesis of cellulose acetate (CA) membranes of different weight percentages of the polymer ranging from 5 to 17.5 wt% with 2.5% increment and their behaviour towards oil removal from water. The membrane showed decreased water content and porosity and also increased hydraulic resistance upto 3.38 kPa/(l m^-2 h^-1) as the concentration of polymer increases. The Atomic Force Microscopic studies reveal that the membrane shows decreased arithmetic mean roughness from 36.291 to 5.935 nm as the concentration of the polymer increases from 5% to 17.5%. Field Emission Scanning Electron Microscopy shows the surface morphology of the CA membrane. X-ray diffraction studies indicate that in the membrane having above 15% polymer concentration, the polymer chains orient to regularity showing higher crystallinity. The thermal studies indicate their stability upto 280°C, and exothermic decompositions from 338°C to 380°C implying the compactness of chains as polymer concentration increases. From Total Organic Carbon studies, the oil rejection was found to be maximum (96.4%) for the highest concentration of polymer in the membrane.

Characterization of Diatomaceous Earth and Halloysite Resources of Poland

The mining industry of Poland is based mostly on coal and copper ores. Strict carbon emissions and the depletion of deposits will slowly phase out coal. Therefore, metallic ores and other mineral raw materials will dominate the extractive industry of Poland. Current measured resources of the largest deposits of halloysite and diatomaceous earth in Poland are over 0.5 Mt and 10 Mt, respectively. Halloysite and diatomaceous earth samples from halloysite Dunino deposits and Jawornik diatomaceous earth deposits (composed mostly of diatomaceous skeletons (frustules)) were subjected to mineralogical analysis, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM-EDS) nanostructural, chemical, elemental, and mineral content analysis. Both these minerals have similar properties, i.e., sorption capacity and cation exchange capacity, and are used mostly for the same purposes, e.g., adsorbents, filler material, and filtration. Samples of Dunino halloysite consist of minerals such as halloysite, kaolinite, hematite, magnetite, quartz, magnesioferrite, rutile, ilmenite, geikielite, goyazite, gorceixite, and crandallite, with little impurities in the form of iron oxides. Occasionally, halloysite nanoplates (HNP) nanotubes (HNT) were found. Diatomaceous earth is composed mainly of silica-containing phases (quartz, opal) and clay minerals (illite and kaolinite). The frustules of diatoms are mostly centric (discoid) and have radius values of approximately 50–60 μm. Large resources of these minerals could be used in the future either for manufacturing composite materials or highly advanced adsorbents.

Physico-chemical processes

The review scans research articles published in 2018 on physico-chemical processes for water and wastewater treatment. The paper includes eight sections, that is, membrane technology, granular filtration, flotation, adsorption, coagulation/flocculation, capacitive deionization, ion exchange, and oxidation. The membrane technology section further divides into six parts, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis/forward osmosis, and membrane distillation. PRACTITIONER POINTS: Totally 266 articles on water and wastewater treatment have been scanned; The review is sectioned into 8 major parts;  Membrane technology has drawn the widest attention from the research community.

Effect of carbon source on lipid accumulation and biodiesel production of Yarrowia lipolytica

Yarrowia lipolytica (Y. lipolytica) is an oleaginous yeast that can utilize hydrophobic substrates as carbon source to produce single-cell lipids for biodiesel production. This study attempts to increase the lipid accumulation ability of Y. lipolytica by first gradually elevating pure oil substrate concentration during the cultivation and then adding short-chain carbon compounds, such as glucose and sodium acetate, to a culture substance according to the optimal oil concentration. Results showed that Y. lipolytica cultured under 40.0 g L^-1 oil concentration showed higher lipids (2.97 g L^-1) and lipid content (37.35%, DW) compared with that cultured under 20.0 g L^-1, where the corresponding values were 1.91 g L^-1 and 24.46%. By contrast, the lipid content of Y. lipolytica increased from 37.35 to 41.50% when the substrate was changed from 40.0 g L^-1 pure oil to 5% sodium acetate combined with 95% oil under the same total carbon concentration. However, lipid accumulation did not increase even though 15% sodium acetate or 5% glucose, or 15% glucose was added to the combined substrate. Moreover, the lipid biomodification of Y. lipolytica was evident when it was cultured under the oil concentration of 20.0 g L^-1. Therefore, the lipid accumulation of Y. lipolytica can be elevated through the gradient increase of oil concentration and by adding a suitable amount of easily degradable carbon source. Furthermore, the lipid biomodification of Y. lipolytica improves biodiesel quality.

Thin Film Composite Membrane for Oily Waste Water Treatment: Recent Advances and Challenges

Oily wastewater discharge from various industry processes and activities have caused dramatic impacts on the human and environment. Treatment of oily wastewater using membrane technology has gained worldwide attention due to its efficiency in removing the amount and concentration of oil and grease as well as other specific pollutants in order to be reused or to fulfill stringent discharge standard. The application of thin film composite (TFC) membrane in reverse osmosis (RO) and forward osmosis (FO) for oily wastewater treatment is an emerging and exciting alternative in this field. This review presents the recent and distinctive development of TFC membranes to address the issues related to oily wastewater treatment. The recent advances in terms of TFC membrane design and separation performance evaluation are reviewed. This article aims to provide useful information and strategies, in both scientific knowledge advancement and practical implementation point of view, for the application TFC membrane for oily wastewater treatment.