Quality assessment of pear juice under ultrasound and commercial pasteurization processing conditions

Induced electric field as alternative pasteurization to improve microbiological safety and quality of bayberry juice

Recently, unconventional techniques like induced electric field (IEF) for continuous pasteurization of liquid food have received great attention. In this study, the effect of IEF on temperature rise, microbiological and quality characteristics of bayberry juice was investigated. Voltage, current, and flow rate affected the terminal temperature. Both IEF (600 V, 4 L/h; 700 V, 6 L/h) and thermal pasteurization (95 °C, 2 min) completely inactivated total plate count, coliforms, yeast and mold in bayberry juice. The pH, total soluble solid and titratable acidity did not vary significantly post-IEF, but conductivity changed slightly. IEF-treated samples exhibited the lowest ΔE values without exceeding 3. Thermal pasteurization (95 °C, 2 min) scored the lowest in color, flavor, odor, and acceptance. GC-MS results demonstrated a significant increase in the content of total volatile compounds following IEF treatments, with the maximum increment reaching 10.65 %. Generally, IEF is a potential technology for processing liquid beverages.

Determining the impact of pre-pressing pretreatments applied to sugarcane on the aroma compounds and quality characteristics of sugarcane juice

The study examined the effects of three pretreatments, blanching (5, 10, and 30 min), ultrasound (15, 20, and 30 min), and steam blanching (10, 20, and 30 min) on sugarcane, assessing their impact on sugarcane juice quality parameters and aroma compounds. The control had the highest soluble solid content, while the ultrasound-15 min (US-15 min)-treated sample had the lowest, affecting pH, total acidity, and color values significantly. Color analysis showed lower L* values and less greenish tones in treated samples. The implemented pretreatments effectively reduce the browning index, with the US-20 min treatment showing the most significant reduction compared to the control sample. All pretreatments deactivated polyphenol oxidase. Carbon isotope analysis yielded significant results. Principal component analysis and hierarchical clustering linked 1,1-diphenyl-2-picrylhydrazyl (DPPH) with 2,2'-azino-bis 3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and 5-hydroxymethyl furfural (HMF) with total phenolic content. The study also highlights significant variations in aroma compound profiles among pretreated sugarcane juice samples, with blanching for 10 min showing notable increases in specific compounds like 2-heptanone and nonanol. Hierarchical clustering showed similarities between blanching-30 min and US-30 min, contrasting with the control. Blanching-10 min had a positive impact on sugarcane juice quality. In conclusion, the study emphasized how pretreatments affect physicochemical properties and aroma compounds in sugarcane juice. PRACTICAL APPLICATION: The research findings suggest that blanching and ultrasound pretreatments can be used by the food industry to improve sugarcane juice quality by reducing browning, enhancing color, and altering aroma profiles. These pretreatments could extend the shelf life and appeal of sugarcane juice, making it more attractive to consumers while maintaining its nutritional properties.

Advancements in Non-Thermal Processing Technologies for Enhancing Safety and Quality of Infant and Baby Food Products: A Review

Breast milk is the main source of nutrition during early life, but both infant formulas (Ifs; up to 12 months) and baby foods (BFs; up to 3 years) are also important for providing essential nutrients. The infant food industry rigorously controls for potential physical, biological, and chemical hazards. Although thermal treatments are commonly used to ensure food safety in IFs and BFs, they can negatively affect sensory qualities, reduce thermosensitive nutrients, and lead to chemical contaminant formation. To address these challenges, non-thermal processing technologies such as high-pressure processing, pulsed electric fields, radio frequency, and ultrasound offer efficient pathogen destruction similar to traditional thermal methods, while reducing the production of key process-induced toxicants such as furan and 5-hydroxymethyl-2-furfural (HMF). These alternative thermal processes aim to overcome the drawbacks of traditional methods while retaining their advantages. This review paper highlights the growing global demand for healthy, sustainable foods, driving food manufacturers to adopt innovative and efficient processing techniques for both IFs and BFs. Based on various studies reviewed for this work, the application of these novel technologies appears to reduce thermal processing intensity, resulting in products with enhanced sensory properties, comparable shelf life, and improved visual appeal compared to conventionally processed products.

Application of Ultrasound Treatments in the Processing and Production of High-Quality and Safe-to-Drink Kiwi Juice

This study explores the potential of thermosonication as an alternative to traditional heat treatments, such as pasteurization, in the processing of fruit juices. Conventional methods often lead to undesirable quality changes in fruit juices, whereas thermosonication offers promising results regarding microbial inactivation and quality preservation. This work focused on the inactivation kinetics of Listeria innocua 2030c, a surrogate for pathogenic L. monocytogenes, in kiwifruit juice using thermosonication at 45 °C, 50 °C, and 55 °C. These treatments were compared with equivalent heat treatments. Quality attributes of the juice were also evaluated to assess process efficiency. Survival data of L. innocua were fitted with the Weibull model, estimating first decimal reduction times (δ) and shape parameters (n). The results reveal temperature and process dependencies on δ, while n remains mostly temperature and treatment independent. Thermosonication outperforms heat treatment, achieving higher L. innocua reductions while retaining quality attributes like pH, soluble solid content, and total phenolics and chlorophylls. Thermosonication at 55 °C stands out, providing a 6.2-log-cycle reduction in just 3 min with superior quality retention. These findings highlight the synergistic effect of temperature and ultrasound, making mild heat processes feasible while enhancing product quality. Thermosonication, particularly at 55 °C, emerges as an effective alternative to traditional thermal treatments for fruit juices, offering improved microbial safety without compromising product quality.

Analytical determination of tryptoquialanines A and B: Ensuring the quality and safety of orange juices

Although orange juice is a popular beverage worldwide, fruit distribution, storage, and processing can facilitate fungal infection by Penicillium digitatum; leading to the production of tremorgenic alkaloids, specifically tryptoquialanines A (TA) and B (TB). An Analytical method was developed and validated based on QuEChERS and LC-MS/MS analysis to determine the levels of TA and TB in fresh, industrial, and homemade orange juices. Excellent linearity was observed in the method over a high range of 1-1000 μg/kg and low range of 1-75 μg/kg with R2 ≥ 0.998. The LOD and LOQ were 1 and 3 μg/kg, respectively. Recoveries showed values between 57 and 83 %, with RSD ≤ 13 %. Our data indicated a higher prevalence of mycotoxin TA in fresh and industrial orange juices. Reduction in TA and TB content after thermal and HPP treatments were ≤ 32 %. However, thermal treatment was more effective in reducing TA and TB contents.

Application of thermosonication for guava juice processing: Impacts on bioactive, microbial, enzymatic and quality attributes

The present work explores different conditions of thermosonication (TS) processing that would ensure microbiological and enzymatic safety for guava juice while simultaneously maximizing the preservation of its quality attributes. The guava juice was subjected to TS treatment (frequency: 40 kHz; power: 200 W; Temperature: 40, 60, and 80 °C; Time: 2, 6 and 10 min) and was compared with fresh and pasteurized (90 °C/60 s) juice samples. The objectives of the research work were to determine the effect of thermosonication on the quality attributes such as total soluble solids (TSS), pH, titratable acidity, cloud value, color attributes, total phenolic contents, total flavonoid contents, antioxidant activity, ascorbic acid levels, enzymatic, microbiological, and sensory properties. The thermosonicated and pasteurized samples showed no significant (p > 0.05) changes in pH, total soluble solids, and titratable acidity. TS improved the cloud value and color attributes. Furthermore, TS enhanced total phenols (10 to17%), flavonoids (5 to 25%), antioxidant activity (10.45% to 14.55%) and retention of ascorbic acid (61.98-83.32%) relative to control. Thermosonicated sample at 80 °C/10 min gives the maximum inactivation of Pectin methyl esterase (PME), Peroxidase (POD) and Polyphenol oxidase (PPO) enzymes. While both thermosonication and pasteurization drastically decreased the microbial count to undetectable levels, only TS exhibited modest improvement in sensory qualities. The results demonstrated that TS can enhance the overall safety, quality, and commercial viability of guava juice as a practical substitute to pasteurization.

Microbial decontamination assisted by ultrasound-based processing technologies in food and model systems: A review

Ultrasound (US) technology is recognized as one of the emerging technologies that arise from the current trends for improving nutritional and organoleptic properties while providing food safety. However, when applying the US alone, higher power and longer treatment times than conventional thermal treatments are needed to achieve a comparable level of microbial inactivation. This results in risks, damaging food products' composition, structure, or sensory properties, and can lead to higher processing costs. Therefore, the US has often been investigated in combination with other approaches, like heating at mild temperatures and/or treatments at elevated pressure, use of antimicrobial substances, or other emerging technologies (e.g., high-pressure processing, pulsed electric fields, nonthermal plasma, or microwaves). A combination of US with different approaches has been reported to be less energy and time consuming. This manuscript aims to provide a broad review of the microbial inactivation efficacy of US technology in different food matrices and model systems. In particular, emphasis is given to the US in combination with the two most industrially viable physical processes, that is, heating at mild temperatures and/or treatments at elevated pressure, resulting in techniques known as thermosonication, manosonication, and manothermosonication. The available literature is reviewed, and critically discussed, and potential research gaps are identified. Additionally, discussions on the US's inactivation mechanisms and lethal effects are included. Finally, mathematical modeling approaches of microbial inactivation kinetics due to US-based processing technologies are also outlined. Overall, this review focuses only on the uses of the US and its combinations with other processes relevant to microbial food decontamination.

Thermosonication of Orange-Carrot Juice Blend: Overall Quality during Refrigerated Storage, and Sensory Acceptance

Ultrasound combined with high temperatures (thermosonication) is an alternative to thermal treatments applied for juice preservation purposes. Blend juices, such as orange-carrot juice, are an interesting option for consumers due to their diversity of unique flavors. The main aim of the present study is to investigate thermosonication's impact on the overall quality of an orange-carrot juice blend over 22-day storage at 7 °C, in comparison to thermal treatment. Sensory acceptance was assessed on the first storage day. The juice blend was prepared based on using 700 mL of orange juice and 300 g of carrot. The effect of ultrasound treatment at 40, 50, and 60 °C for 5 and 10 min, as well as of thermal treatment at 90 °C for 30 s, on the physicochemical, nutritional, and microbiological quality of the investigated orange-carrot juice blend was tested. Both the ultrasound and the thermal treatment could maintain pH, °Brix, total titratable acidity, total carotenoid content, total phenolic compounds, and the antioxidant capacity of untreated juice samples. All ultrasound treatments improved samples' brightness and hue value, and made the juice brighter and redder. Only ultrasound treatments at 50 °C/10 min and at 60 °C/10 min have significantly reduced total coliform counts at 35 °C. Thus, they were selected along with untreated juice for sensory analysis, whereas thermal treatment was used for comparison purposes. Thermosonication at 60 °C for 10 min recorded the lowest scores for juice flavor, taste, overall acceptance, and purchase intention. Thermal treatment and ultrasound at 60 °C for 5 min recorded similar scores. Minimal variations in quality parameters were observed over 22-day storage in all treatments. Thermosonication at 60 °C for 5 min has improved samples' microbiological safety and resulted in good sensorial acceptance. Although thermosonication has the potential to be used in orange-carrot juice processing, further investigations are necessary to enhance its microbial effect on this product.

Sonoprocessing: mechanisms and recent applications of power ultrasound in food

There is a growing interest in using green technologies in the food industry. As a green processing technique, ultrasound has a great potential to be applied in many food applications. In this review, the basic mechanism of ultrasound processing technology has been discussed. Then, ultrasound technology was reviewed from the application of assisted food processing methods, such as assisted gelation, assisted freezing and thawing, assisted crystallization, and other assisted applications. Moreover, ultrasound was reviewed from the aspect of structure and property modification technology, such as modification of polysaccharides and fats. Furthermore, ultrasound was reviewed to facilitate beneficial food reactions, such as glycosylation, enzymatic cross-linking, protein hydrolyzation, fermentation, and marination. After that, ultrasound applications in the food safety sector were reviewed from the aspect of the inactivation of microbes, degradation of pesticides, and toxins, as well inactivation of some enzymes. Finally, the applications of ultrasound technology in food waste disposal and environmental protection were reviewed. Thus, some sonoprocessing technologies can be recommended for the use in the food industry on a large scale. However, there is still a need for funding research and development projects to develop more efficient ultrasound devices.

A chemometric approach to evaluate the effects of probe-type ultrasonication on the enzyme inactivation and quality attributes of fresh amla juice

The enzymatic browning induced in amla juice due to the high activity of polyphenol oxidase (PPO) and peroxidase (POD) is one of the critical issues faced by the industry. The present study assessed the suitability of non-thermal, high-intensity ultrasound (US) on the inactivation of PPO and POD in fresh Indian Gooseberry juice. Ultrasonic waves, using a 6 mm titanium alloy probe were irradiated in the juice at a maximum power of 455 W and frequency of 20 kHz. The subsequent effects on biochemical attributes were studied using response surface methodology. Inactivation rates of 90.72 % and 73.18 %, respectively, for PPO and POD enzymes, were observed at the highest US intensity and exposure time. Numerical optimisation using the three-factor, three-level Box-Behnken design suggested that an optimum process at 70 % (energy density: 1610 Wcm-2) pulsed at 5 s on and 5 s off for 7 min 30 s resulted in PPO and POD inactivation of the order of 76.42 % and 64.57 % respectively. At these experimental conditions, the optimized levels of biochemical attributes i.e., ascorbic acid (738.50 mg/100 mL), total phenols (17.10 mg/mL), DPPH antioxidant activity (58.47 %), tannins (7.11 µg/mL), colour change (ΔE = 9.04) and flavonoids (6.14 mg/mL) were achieved. The overall statistical models were significant for all the responses except for reducing sugars. Furthermore, the approximation equations for individual responses indicated that the goodness of fit was adequate (R2 > 0.90). The results suggested that ultrasound is a suitable processing technique for amla juice stabilisation compared to thermal treatments that result in the loss of quality.

Understanding the effects of ultrasound processng on texture and rheological properties of food

The demand for the production of high quality and safe food products has been ever increasing. Consequently, the industry is looking for novel technologies in food processing operations that are cost-effective, rapid and have a better efficiency over traditional methods. Ultrasound is well-known technology to enhance the rate of heat and mass transfer providing a high end-product quality, at just a fraction of time and energy normally required for conventional methods. The irradiation of foods with ultrasound creates acoustic cavitation that has been used to cause desirable changes in the treated products. The technology is being successfully used in various unit operations such as sterilization, pasteurization, extraction, drying, emulsification, degassing, enhancing oxidation, thawing, freezing and crystallization, brining, pickling, foaming and rehydration, and so forth. However, the high pressure and temperature associated with the cavitation process is expected to induce some changes in the textural and rheological properties of foods which form an important aspect of product quality in terms of consumer acceptability. The present review is aimed to focus on the effects of ultrasound processing on the textural and rheological properties of food products and how these properties are influenced by the process variables.

How to comprehensively improve juice quality: a review of the impacts of sterilization technology on the overall quality of fruit and vegetable juices in 2010-2021, an updated overview and current issues

Fruit and vegetable juices (FVJ) are rich in nutrients, so they easily breed bacteria, which cause microbial pollution and rapid deterioration of their quality and safety. Sterilization is an important operation in FVJ processing. However, regardless of whether thermal sterilization or non-thermal sterilization is used, the effect and its impact on the overall quality of FVJ are strongly dependent on the processing parameters, microbial species, and FVJ matrix. Therefore, for different types of FVJ, an understanding of the impacts that different sterilization technologies have on the overall quality of the juice is important in designing and optimizing technical parameters to produce value-added products. This article provides an overview of the application of thermal and non-thermal technique in the field of FVJ processing over the past 10 years. The operating principle and effects of various technologies on the inactivation of microorganisms and enzymes, nutritional and functional characteristics, physicochemical properties, and sensory quality of a wide range of FVJ are comprehensively discussed. The application of different combinations of hurdle technology in the field of FVJ sterilization processing are also discussed in detail. Additionally, the advantages, limitations, and current application prospects of different sterilization technologies are summarized.

Utilization of fermented and enzymatically hydrolyzed soy press cake as ingredient for meat analogues

The aim of the present study was to improve the properties of soy press cake to be utilized as an ingredient of meat analogues. Soy press cakes were fermented with lactobacillus strains, and separately hydrolyzed by cellulase/xylanase mixture and α-amylase. Meat analogues were produced with 10% fermented or hydrolyzed soy press cakes. The effect of applied processes on protein oxidation, physical and functional properties of soy press cakes were analyzed, as well as sensory and textural properties of meat analogues. The results indicated that soy press cake was a suitable source of fibre and energy with low content of saturated fatty acids, and provided plant-based proteins and essential amino acids. The study demonstrated the potential of lactic acid fermentation, and enzymatic hydrolysis to improve water- and oil-holding capacity and reduce protein oxidation in soy press cakes. L. acidophilus 336 and cellulase/xylanase mixture were recommended for fermentation and hydrolysis of soy press cakes, respectively, regarding reduction of protein oxidation. Fermentation of soy press cakes with L. plantarum P1 improved the texture of meat analogues. Press cakes fermentation reduced bitterness, increased juiciness, and balanced the taste of meat analogues. Fermented soy press cake was recommended for the production of meat analogues.

•

This research was the 1st application of fermented soy press cake in meat analogue.

•

Fermentation and hydrolysis improved the functional properties of soy press cakes.

•

Protein oxidation in soy press cakes was reduced after fermentation and hydrolysis.

•

Fermented soy press cakes improved sensory quality of the meat analogues.

•

L. plantarum P1 is recommended for the fermentation of soy press cakes.

Thermal treatment alternatives for enzymes inactivation in fruit juices: Recent breakthroughs and advancements

Fruit juices (FJs) are frequently taken owing to their nutritious benefits, appealing flavour, and vibrant colour. The colours of the FJs are critical indicators of the qualitative features that influence the consumer's attention. Although FJs' intrinsic acidity serves as a barrier to bacterial growth, their enzymatic stability remains an issue for their shelf life. Inactivation of enzymes is critical during FJ processing, and selective inactivation is the primary focus of enzyme inactivation. The merchants, on the other hand, want the FJs to stay stable. The most prevalent technique of processing FJ is by conventional heat treatment, which degrades its nutritive value and appearance. The FJ processing industry has undergone a dramatic transformation from thermal treatments to nonthermal treatments (NTTs) during the past two decades to meet the requirements for microbiological and enzymatic stability. The manufacturers want safe and stable FJs, while buyers want high-quality FJs. According to the past investigation, NTTs have the potential to manufacture microbiologically safe and enzymatically stable FJs with low loss of bioactive components. Furthermore, it has been demonstrated that different NTTs combined with or without other NTTs or mild heating as a hurdle technology increase the synergistic effect for microbiological safety and stability of FJs. Concise information about the variables that affect NTTs' action mode has also been addressed. Primary inactivates enzymes by modifying the protein structure and active site conformation. NTTs may increase enzyme activity depending on the nature of the enzyme contained in FJs, the applied pressure, pH, temperature, and treatment period. This is due to the release of membrane-bound enzymes as well as changes in protein structure and active sites that allow substrate interaction. Additionally, the combination of several NTTs as a hurdle technology, as well as temperature and treatment periods, resulted in increased enzyme inactivation in FJs. Therefore, a combination of thermal and non-thermal technologies is suggested to increase the effectiveness of the process as well as preserve the juice quality.

Ifs and buts of non-thermal processing technologies for plant-based drinks' bioactive compounds

Vegetables and fruits contain a variety of bioactive nutrients and non-nutrients that are associated with health promotion. Consumers currently demand foods with high contents of healthy compounds, as well as preserved natural taste and flavour, minimally processed without using artificial additives. Processing alternatives to be applied on plant-based foodstuffs to obtain beverages are mainly referred to as classical thermal treatments that although are effective treatments to ensure safety and extended shelf-life, also cause undesirable changes in the sensory profiles and phytochemical properties of beverages, thus affecting the overall quality and acceptance by consumers. As a result of these limitations, new non-thermal technologies have been developed for plant-based foods/beverages to enhance the overall quality of these products regarding microbiological safety, sensory traits, and content of bioactive nutrients and non-nutrients during the shelf-life of the product, thus allowing to obtain enhanced health-promoting beverages. Accordingly, the present article attempts to review critically the principal benefits and downsides of the main non-thermal processing alternatives (High hydrostatic pressure, pulsed electric fields, ultraviolet light, and ultrasound) to set up sound comparisons with conventional thermal treatments, providing a vision about their practical application that allows identifying the best choice for the sectoral industry in non-alcoholic fruit and vegetable-based beverages.

Effect of Ultrasound on the Activity of Mushroom (Agaricus bisporous) Polyphenol Oxidase and Observation of Structural Changes Using Time-resolved Fluorescence

Polyphenol oxidase (PPO) is an enzyme associated with the browning process that can occur from mechanical injury and postharvest storage. Thus, its inactivation to inhibit this process is of great interest to the food industry. Recently a nonthermal technology, high frequency ultrasound (100–1 MHz), has found usage in this aspect. In this work, the application of high-frequency (378 kHz, 583 kHz, 1144 kHz, and 1175 kHz) and low frequency (20 kHz) treatment on a PPO extract (from mushrooms) by monitoring the residual enzymatic activity is described. A control thermal treatment at 40 °C was also performed for comparison purposes. High-frequency inactivation data fitted well using the Weibull model, whereas those obtained upon low frequency followed first-order kinetics. The inactivation rate constant obtained ranged from 0.0054 (20 kHz) to 0.028 min−1 (at 583 kHz). To elucidate changes in the enzyme structure time-resolved spectroscopy of a commercial PPO enzyme model was employed. Results indicated that ultrasound-induced structural changes in PPO, in keeping with the activity behaviour upon sonication.

Effect of Different Sterilization Methods on the Microbial and Physicochemical Changes in Prunus mume Juice during Storage

This study evaluated the pasteurization (P), ozone (O3), ultrasonic (US), and high-hydrostatic-pressure (HHP) sterilization approaches for processing of Prunus mume regarding browning factors and microorganisms, compared with non-sterilization (control check, CK) treatment. The microorganisms (total bacterial count and fungi and yeast count) in the juice were identified after different sterilization techniques, while the quality parameter changes (degree of browning, color measurements, total phenolic content, reducing sugar, ascorbic acid, 5-hydroxymethyl furaldehyde (5-HMF), amino acid nitrogen, total soluble solids (TSS), pH value) were investigated. The results indicate that P and HHP treatment reduced non-enzymatic browning while substantially impacting the color measurements, TSS, and pH, while the sterilization effect was remarkable, with a rate exceeding 90%. Furthermore, the Prunus mume juices treated with P and HHP sterilization were used as the objects, and the CK group was used as the control group. They were placed at 4 °C, 25 °C and 37 °C, respectively, and stored in dark for 15 d. Sampling and determination were carried out on 0, 3, 6, 9, 12, and 15 d, respectively. M-&-Y (molds and yeasts) were not detected in the late storage period, and no obvious microbial growth was observed during storage, indicating that P and HHP treatments could ensure the microbial safety of Prunus mume juice. P- and HHP- treated Prunus mume juice has better quality and low temperature storage is beneficial for maintaining the quality of Prunus mume juice. Therefore, P treatment or HHP treatment combined with low temperature storage could achieve a more ideal storage effect. Overall, this study conclusively established that P and HHP methods were suitable for sterilizing Prunus mume juice. These techniques minimally affected overall product quality while better maintaining the quality parameters than the untreated juice samples and those exposed to O3 and US treatment.

Enhancing the Efficacy of Microwave Blanching-cum-black Mould Inactivation of Whole Garlic (Allium sativum L.) Bulbs Using Ultrasound: Higher Inactivation of Peroxidase, Polyphenol Oxidase, and Aspergillus niger at Lower Processing Temperatures

The freshly harvested whole garlic bulbs require the inactivation of peroxidase (POD), polyphenol oxidase (PPO), and Aspergillus niger. However, the conventional hot water blanching and modern pretreatment like ultrasound (US) and microwave (MW) cannot individually inactivate both the enzymes and Aspergillus niger to the desired levels without compromising the quality of the garlic due to either of the higher process temperatures (> 85 °C) or prolonged treatment times. Therefore, a two-stage sequential US followed by MW pretreatment for garlic bulbs was developed for simultaneous inactivation of POD, PPO, and Aspergillus niger to the desired levels and overcome the individual pretreatment drawbacks. The separate experiments were conducted for US and MW pretreatment using central composite design, and optimization was carried out using response surface methodology. When temperature constraint was considered during optimization, the US was able to reduce POD, PPO, and Aspergillus niger by 80.87%, 93.80%, and 2.60 logs, respectively, whereas MW reduced POD, PPO, and Aspergillus niger by 77.84%, 77.04%, and 1.90 logs, respectively. The US treatment (58.43 WL⁻¹ ultrasound power density for 40 min with an initial bath temperature of 60 °C) followed by MW treatment (3 Wg⁻¹ MW power density for 120 s) resulted in 90.37% POD and 92.38% PPO inactivation with 2.62 log reduction in Aspergillus niger. The maximum temperature reached in US + MW process was 83 °C which ensured no severe thermal damage to the garlic bulbs. The scanning electron microscopic images indicated that ultrasonication induced the porous structure in garlic and helped microwaves increase the product temperature rapidly and achieve the higher inactivation of enzymes and Aspergillus niger. Thus, the US was found to be enhancing the efficacy of the MW heating process.

Cryoconcentration by Centrifugation–Filtration: A Simultaneous, Efficient and Innovative Method to Increase Thermosensitive Bioactive Compounds of Aqueous Maqui (Aristotelia chilensis (Mol.) Stuntz) Extract

Maqui (Aristotelia chilensis (Mol.) Stuntz) is a Chilean berry rich in antioxidants, which are mostly found in the pulp and skin of the fruit. The objective was to evaluate the cryoconcentration process by centrifugation–filtration as a simultaneous, efficient, and innovative method to increase the content of thermosensitive bioactive compounds of aqueous maqui extract. Cryoconcentration separated the concentrated solute from the aqueous maqui extract with an efficiency of more than 95%; it increased the content of total polyphenols and total anthocyanins and antioxidant capacity by 280%, 573%, and 226%, respectively. Although the concentrates obtained by evaporation at 50, 70, and 80 °C increased the content of bioactive compounds, they did so in a lower percentage than the cryoconcentrate. Furthermore, cyanidin 3,5-diglucoside was degraded at 70 and 80 °C. In conclusion, cryoconcentration by centrifugation–filtration as a simultaneous process efficiently separates the solutes from the frozen matrix of aqueous maqui extract, and it maintains and increases the contents of polyphenols and anthocyanins and antioxidant capacity. This method is recommended for concentrating natural berry extracts with thermosensitive compounds.

Inactivation of Escherichia coli O157:H7 in apple juice via induced electric field (IEF) and its bactericidal mechanism

Non-conventional heating technology based on electric fields can be utilized to process liquid foods. In this study, the induced electric field (IEF) was investigated to clarify its inactivation mechanism on E.coli. Staining results show that inactivation of E.coli by IEF can be attributed to the reversible destruction of the cell membrane, followed by the denaturation of intracellular enzymes, and finally the irreversible rupture of the cell membrane. The increased levels of extracellular proteins and nucleic acids were also observed. IEF treatment at 400 Hz and 800 V (or 53 V/cm) results in a reduction of 4.5 log CFU·mL^-1 in the number of E.coli. Storage life analysis shows that IEF treatment can improve the stability of apple juice and the content of bioactive components. Thus, IEF is a potential technique for liquid food processing.

Comparative Transcriptomic Analyses Provide Insights into the Enzymatic Browning Mechanism of Fresh-Cut Sand Pear Fruit

Pear (Pyrus spp.) is one of the most commonly consumed temperate fruits, having considerable economic and health importance. Fresh-cut or processed pear fruits are prone to browning because of the abundant phenolic compounds; however, little is known about the molecular mechanisms underlying enzymatic browning of fresh-cut sand pear fruit. In this study, fruits of two sand pear genotypes (low browning cultivar ‘Eli No.2′ and high browning cultivar ‘Weiningdahuangli’) were used to analyze the molecular mechanism of enzymatic browning by SMRT-seq and RNA-seq. The results generated 69,122 consensus isoforms, 21,336 new transcripts, 7105 alternative splicing events, and 254 long non-coding RNAs (lncRNAs). Furthermore, five genes related to enzymatic browning were predicted to be targets of six lncRNAs, and 9930 differentially expressed genes (DEGs) were identified between two different flesh browning cultivars. Meanwhile, most DEGs (e.g., PAL, 4CL, CAD, CCR, CHS, and LAR) involved in the phenylpropanoid biosynthesis pathway were up-regulated, and the expression of PPO and POD were highly expressed in the high-browning cultivar. Interestingly, the transcript level of PbrPPO4 (Pbr000321.4) was significantly higher than other PPO and POD genes, and a high level of total polyphenol and PPO activity were observed in the high browning cultivar. We found that the expression of lncRNA PB.156.1 was significantly positively correlated with the target gene PbrPPO4 (Pbr000321.4). The results suggest that PbrPPO4 might act as a major contributor and a key enzyme encoding gene in regulating fresh-cut sand pear fruit enzymatic browning; the expression of PbrPPO4 was probably regulated by lncRNA PB.156.1. Altogether, the transcriptomic and physiological analyses expand the knowledge of sand pear flesh enzymatic browning at the molecular level and provide a foundation for germplasm resources for molecular breeding of high polyphenol and low browning cultivars in sand pears.

Review of ultrasound combinations with hybrid and innovative techniques for extraction and processing of food and natural products

Ultrasound has a significant effect on the rate of various processes in food, perfume, cosmetic, pharmaceutical, bio-fuel, materials, or fine chemical industries, despite some shortcomings. Combination with other conventional or innovative techniques can overcome these limitations, enhance energy, momentum and mass transfer, and has been successfully demonstrated in many recent studies. Various ultrasound combined hybrid and innovative techniques are systematically summarized in this review for the first time. Ultrasound can be combined with diverse conventional techniques including Soxhlet, Clevenger, enzyme, hydrotropes, ionic liquids, Deep Eutectic Solvents (DES) or Natural Deep Eutectic Solvents (NADES), to enhance mixing and micro-mixing, reduced thermal and concentration gradients, and selective extraction. Moreover, combinations of ultrasound with other innovative techniques such as microwave, extrusion, supercritical fluid, subcritical and pressure liquids, Instant controlled pressure drop (DIC), Pulsed Electric Field (PEF), Ultra-Violet (UV) or Infra-Red (IR) radiations, Counter-current chromatography (CCC), or centrifugal partition chromatographs (CPC) can enable reduced equipment size, faster response to process control, faster start-up, increased production, and elimination of process steps. The theories and applications of these ultrasound combined hybrid and innovative techniques as well as their advantages and limitations are compared, and further perspectives are proposed. This review provides new insights into advances in ultrasound combined techniques and their application at research, educational, and industrial level in modern food and plant-based chemistry.

High Pressure Processing Impact on Alternariol and Aflatoxins of Grape Juice and Fruit Juice-Milk Based Beverages

High-pressure processing (HPP) has emerged over the last 2 decades as a good alternative to traditional thermal treatment for food safety and shelf-life extension, supplying foods with similar characteristics to those of fresh products. Currently, HPP has also been proposed as a useful tool to reduce food contaminants, such as pesticides and mycotoxins. The aim of the present study is to explore the effect of HPP technology at 600 MPa during 5 min at room temperature on alternariol (AOH) and aflatoxin B1 (AFB1) mycotoxins reduction in different juice models. The effect of HPP has also been compared with a thermal treatment performed at 90 °C during 21 s. For this, different juice models, orange juice/milk beverage, strawberry juice/milk beverage and grape juice, were prepared and spiked individually with AOH and AFB1 at a concentration of 100 µg/L. After HPP and thermal treatments, mycotoxins were extracted from treated samples and controls by dispersive liquid–liquid microextraction (DLLME) and determined by HPLC-MS/MS-IT. The results obtained revealed reduction percentages up to 24% for AFB1 and 37% for AOH. Comparing between different juice models, significant differences were observed for AFB1 residues in orange juice/milk versus strawberry juice/milk beverages after HPP treatment. Moreover, HPP resulted as more effective than thermal treatment, being an effective tool to incorporate to food industry in order to reach mycotoxins reductions.

Effects of Pulsed Electric Fields and Ultrasound Processing on Proteins and Enzymes: A Review

There is increasing demand among consumers for food products free of chemical preservatives, minimally processed and have fresh-like natural flavors. To meet these growing demands, the industries and researchers are finding alternative processing methods, which involve nonthermal methods to obtain a quality product that meets the consumer demands and adheres to the food safety protocols. In the past two decades’ various research groups have developed a wide range of nonthermal processing methods, of which few have shown potential in replacing the traditional thermal processing systems. Among all the methods, ultrasonication (US) and pulsed electric field (PEF) seem to be the most effective in attaining desirable food products. Several researchers have shown that these methods significantly affect various major and minor nutritional components present in food, including proteins and enzymes. In this review, we are going to discuss the effect of nonthermal methods on proteins, including enzymes. This review comprises results from the latest studies conducted from all over the world, which would help the research community and industry investigate the future pathway for nonthermal processing methods, especially in preserving the nutritional safety and integrity of the food.

Combined effect of thermosonication and high hydrostatic pressure on bioactive compounds, microbial load, and enzyme activities of blueberry juice

The current study is aimed to evaluate the combined effect of thermosonication (TS) and high hydrostatic pressure (HHP) on enzyme activities (polyphenolase and peroxidase), microbial load and phenolic compounds (phenols, flavonoids, and anthocyanins) of blueberry juice. Blueberry juice has been treated with TS (40 kHz and 240 W) at different temperatures (25 °C and 45 °C) for 15 mins with subsequent different HHP (200, 400 and 600 MPa) for 5 mins at room temperature. The results revealed that a combined use of HHP of 400 MPa and 600 MPa with TS at 45 °C not only reduced microorganisms below 1 logCFU/mL, but also significantly inactivated enzymes. The treatments also increased the phenolic compounds, peroxyl radical scavenging capacity (PSC), and DPPH free radical scavenging activity to a higher level without causing any changes in soluble solids and pH. Therefore, the combination of HHP and TS can be used as a novel alternative nonthermal technology to improve the nutritional qualities of blueberry juice, which produces a desirable, healthy juice for consumers.

An Overview of the Factors Influencing Apple Cider Sensory and Microbial Quality from Raw Materials to Emerging Processing Technologies

Given apple, an easily adapted culture, and a large number of apple varieties, the production of apple cider is widespread globally. Through the fermentation process, a series of chemical changes take place depending on the apple juice composition, type of microorganism involved and technology applied. Following both fermentations, alcoholic and malo-lactic, and during maturation, the sensory profile of cider changes. This review summarises the current knowledge about the influence of apple variety and microorganisms involved in cider fermentation on the sensory and volatile profiles of cider. Implications of both Saccharomyces, non-Saccharomyces yeast and lactic acid bacteria, respectively, are discussed. Also are presented the emerging technologies applied to cider processing (pulsed electric field, microwave extraction, enzymatic, ultraviolet and ultrasound treatments, high-pressure and pulsed light processing) and the latest trends for a balanced production in terms of sustainability, authenticity and consumer preferences.

Effect of Pretreatment with Low-Frequency Ultrasound on Quality Parameters in Gulupa (Passiflora edulis Sims) Pulp

The Gulupa (Passiflora edulis f. edulis Sims) is an expression of South America’s tropics’ biodiversity, and a source of B vitamins and amino acids. It is a climacteric export fruit for which it is necessary to incorporate emerging technologies for its conservation and transport. This work investigated the effect of ultrasound on gulupa pulp and verified the stability of the characters of interest in the shelf life of 20 days. Six treatments and a control sample were used, evaluated in triplicate, and varied in frequency (30 and 40 kHz) with an exposure time of 10, 20, and 30 min. A statistical analysis of unidirectional variances and Dunnett’s test was used. It was found that the ultrasound treatments did not affect the pH or the titratable acidity. Soluble solid results presented a significant increase (p < 0.05) (from 13.4 to 14.8% w/v) in the antioxidant capacity (from 1.13 to 1.54 µmol Trolox Equivalent (TE)/g by the ABTS•+ (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)) Cationic Radical Assay and from 3.3 to 3.7 µmol TE/g by the DPPH· (2,2-diphenyl-1-picrilhydrazil) Radical Scavenging Assay). During the shelf life, ascorbic acid was the parameter that varied most (p < 0.05). It decreased from 42.7 to 21.6 mg ascorbic acid/100 g of pulp in the control sample. However, a smaller decrease was observed (23.8–24.5 mg ascorbic acid/100 g of pulp) in the 40 kHz treatments. The smallest global color difference (ΔE) for the control was found in the 40 kHz treatment at 30 min through the entire shelf life (day 0 to 20). Ultrasound treatment offers a new strategy to improve and extend the shelf life of chilled gulupa pulp.

Green ultrasound-assisted processing for extending the shelf-life of prebiotic-rich strawberry juices

BACKGROUND

Adding value to conventional fruit juices by including prebiotic compounds into their formulation and preserving them using non-thermal, eco-friendly and safe technologies represent interesting and strategic approaches to diversify healthy and innovative food products. In this context, the effect of ultrasound-assisted processing (for 15 and 30 min, 40 kHz, 180 W) on microbiological, physicochemical, nutritional and sensory quality of prebiotic-rich strawberry juices was investigated during storage (14 days, 5 °C).

RESULTS

Compared to untreated samples, the applied preservation treatments enhanced the microbiological and nutritional quality of samples by significantly reducing native microflora counts (reductions up to 1 log CFU mL^-1 at day 14) and increasing the total phenolic content (by more than 25% in comparison to controls at day 14) leading to higher antioxidant capacity of prebiotic-rich strawberry juices. Ultrasound processing and prebiotic enrichment had no negative effect on sensory attributes of enriched samples, suggesting that this non-thermal technique successfully retained the fresh-like attributes of strawberry juices during their shelf-life, contributing to the good sensory stability of juices. In addition, ultrasound treatments had no detrimental impact on physicochemical quality and ascorbic acid content of enriched samples, showing similar stability to control samples during storage.

CONCLUSIONS

Based on our results, ultrasound processing appears to be a promising non-thermal technique for ensuring a stable product from both microbiological and sensory points of view with improved antioxidant capacity and unaltered physicochemical quality while offering a healthier, nutritive and valuable food alternative. © 2020 Society of Chemical Industry.

Influence of high-intensity ultrasound on color, chemical composition and antioxidant properties of araçá-boi pulp

In this study, we evaluated the influence of the ultrasound application on five levels of energy density (1000; 3000; 5000 and 7000 J g^-1) compared to two pasteurization techniques (70 °C/5 min and 94 °C/0.5 min) on color parameters, polyphenoloxidase activity, chemical composition, and antioxidant properties of araçá-boi pulp. Ultrasound caused changes in the parameters brightness/darkness, hue angle, and total color difference, but did not change chroma, yellowness/blueness, color index, and yellow index. Moreover, this technique was efficient for inactivating polyphenoloxidase. Ultrasound at 7000 J g^-1 was responsible for an increase in soluble solids (16%), vitamin C (46.5%), phenolics (15.65%), flavonoids (50%) and antioxidant capacity in relation to untreated pulp, while ultrasound at 5000 J g^-1 increased the relative intensity of compounds of biological interest. Thus, ultrasound can be considered as a promising technique to maintain the shelf life, without drastically affecting the nutritional and functional qualities of this fruit.

Effect of pilot-scale UV-C light treatment assisted by mild heat on E. coli, L. plantarum and S. cerevisiae inactivation in clear and turbid fruit juices. Storage study of surviving populations

Consumer growing demands for high-quality and safe food and beverages have stimulated the interest in alternative preservation technologies. Short-wavelength ultraviolet light (UV-C, 254 nm) has proven to be useful for the decontamination of a great variety of clear juices while improving their quality compared to traditional thermal treatments. Suspended solids and coloured compounds in turbid juices, diminish light transmission. The use of UV-C under a hurdle approach, may be a promising strategy for their treatment. The purpose of this study was to analyse Escherichia coli ATCC 25922, Saccharomyces cerevisiae KE 162 and Lactobacillus plantarum ATCC 8014 inactivation in clear pear juice (PJ), turbid orange-tangerine (OT) and orange-banana-mango-kiwi-strawberry (OBMKS) juices processed by single UV-C (390 mJ/cm², 20 °C) and UV-C assisted by mild heat (UV-C/H, 50 °C) at pilot-scale in a coiled tubing unit and stored under refrigeration (5 °C). Inactivation studies were also conducted in peptone water (PW) and model solution (MS). The adequacy of the Coroller, Weibull and Biphasic Plus Shoulder models was studied. UV-C was highly effective in PW, MS and PJ, achieving up to 5.5-6.3-4.7, 4.8-5.1-4.6 and 4.4-5.5 log reductions for L. plantarum, E. coli,and S. cerevisiae, respectively. Whereas, a moderate inactivation by single UV-C was recorded in the turbid blends, reducing up to 2.4-3.8-1.6 and 3.6-3.7-1.3 log-cycles in OT and OBMKS, respectively. When the UV-C/H treatment was applied, high bacterial inactivation was observed achieving 5.2-5.6, 6.3-6.6 and 5.5-6.7 log reductions in OT, OBMKS and PJ, respectively, while 4.6-4.9 log reductions were determined for the yeast in OBMKS and OT, respectively. Thus, additive inactivation effects between UV-C and H were observed. All the models tested gave useful information regarding the existence of microbial subpopulations with varying resistances. However, the cumulative Weibull distribution function was the most versatile one, fitting inactivation curves with different shapes. Additionally, the frequency distributions of resistances showed that UV-C/H not only increased the UV-C microbicidal effect but changed the distribution of inactivation times. Principal component analysis revealed that UV-C effectiveness was associated to low particle size, a⃰, turbidity and high UV-C transmittance. An increase on the inactivation of treated bacterial populations was recorded along storage, while no yeast recovery was observed, thus emphasizing the contribution of refrigerated storage to microbial inactivation. Microbial inactivation in clear and turbid juices achieved by UV-C (390 mJ/cm²) assisted by mild heat (50 °C) and subsequent refrigerated storage may represent an useful alternative for multiple applications in the juice industry.

Effects of temperature and fluid velocity on beer pasteurization in open and closed loop heating systems: numerical modeling and simulation

A two-dimensional symmetric heat transfer model and a fluid rotation model were established to study beer pasteurization process through the COMSOL Multiphysics software. Two heating modes, including closed-loop heating (CLH) and open-loop heating (OLH), were considered. There was a significant natural convection phenomenon in both heating systems. However, the natural convection became weaker with a gradual increase in the heating temperature of the beer. The maximum fluid velocity (FV) in CLH and OLH modes was 69.34 and 43.74 mm/s, respectively. After heating at 333.13 K for 20 min, the minimum and maximum pasteurization unit (PU) values in CLH were 55 and 59, respectively, while the corresponding values for OLH were 30 and 55, respectively. The pasteurization effect under the CLH mode was better than the OLH one. The heat transfer was also affected by fluid flow (laminar and turbulence) patterns. The PU value was nonlinearly related to the FV. The optimal FV can be obtained at ∼50 mm/s.

Innovative Hurdle Technologies for the Preservation of Functional Fruit Juices

Functional nutrition, which includes the consumption of fruit juices, has become the field of interest for those seeking a healthy lifestyle. Functional nutrition is also of great interest to the food industry, with the aims of improving human health and providing economic prosperity in a sustainable manner. The functional food sector is the most profitable part of the food industry, with a fast-growing market resulting from new sociodemographic trends (e.g., longer life expectancy, higher standard of living, better health care), which often includes sustainable concepts of food production. Therefore, the demand for hurdle technology in the food industry is growing, along with the consumption of minimally processed foods, not only because this approach inactivates microorganisms in food, but because it can also prolong the shelf life of food products. To preserve food products such as fruit juices, the hurdle technology approach often uses non-thermal methods as alternatives to pasteurization, which can cause a decrease in the nutritional value and quality of the food. Non-thermal technologies are often combined with different hurdles, such as antimicrobial additives, thermal treatment, and ultraviolet or pulsed light, to achieve synergistic effects and overall quality improvements in (functional) juices. Hence, hurdle technology could be a promising approach for the preservation of fruit juices due to its efficiency and low impact on juice quality and characteristics, although all processing parameters still require optimization.