Biscuit baking: A review

Heat-moisture treatment can modulate all-purpose wheat flour for short dough biscuit making: Evidences and mechanism

In view of the merits of all-purpose wheat flour (APWF) to soft wheat flour (SWF) in cost and protein supply, the feasibility of heat-moisture treatment (HMT, 19% moisture for 1 h at 60, 80 and 100 °C, respectively) to modify APWF as a substitute SWF in making short dough biscuits was explored. For underlying mechanisms, on the one hand, HMT reduced the hydration capacity of damaged starch particles by coating them with denatured proteins. On the other hand, HMT at 80 °C and 100 °C significantly denatured gluten proteins to form protein aggregates, highly weakening the gluten network in dough. These two aspects jointly conferred APWF dough with higher deformability and therefore significantly improved the qualities of biscuits. Moreover, the qualities of biscuits from APWF upon HMT-100 °C were largely comparable to that from SWF, even higher values were concluded in spread ratio, volume, specific volume and consumer acceptance.

Unlocking the potential of rice bran oil body as fat replacement in cookies: single and double crosslinked binary emulsion-filled gels based on lutein-loaded rice bran oil body emulsion

BACKGROUND

Rice bran oil body is rich in nutritional value, which is a byproduct of rice processing. The aim of this study is to develop a novel emulsion-filled gel with lutein-loaded rice bran oil body and investigate its functionality as a fat replacer in cookies. The effects of incorporating structured oil body in the form of emulsion-filled gel instead of butter in cookies with a ratio of 0, 10, 20 and 50 wt% formulation were determined by measuring appearance, texture, thermodynamic properties, moisture distribution and microstructure.

RESULTS

The results demonstrated the relationship between geometry, moisture and structure. The 20 wt% emulsion-filled gel substitution ratio yielded mobility and distribution abilities of melted fat and sugar in the cookies that were closest to those of butter. The addition of emulsion-filled gel increased the L* value and decreased the a* value, while the b* value of the cookie increased due to the advanced delivery of lutein by oil body. By controlling the addition ratio, the texture of the cookies can be adjusted. Starch granules were separated due to colloidal particles, reducing saturated fat content and decreasing cookie gelatinization enthalpy. The fat coating on starch particles enhanced the binding capacity of free water, improving air entrapment and forming a constrained gluten network structure.

CONCLUSION

These findings provide a theoretical basis for rice bran oil body as a novel substitute for butter in the development of healthy, high-quality cookies. © 2024 Society of Chemical Industry.

Improvement of Antioxidant Activity and Sensory Properties of Functional Cookies by Fortification with Ultrasound-Assisted Hot-Air-Drying Blackberry Powders

In response to the global challenge of food wastage and high perishability of blackberries, this study evaluated the use of ultrasound-assisted hot air drying (US-HAD) to convert downgraded blackberries into powders, comparing it with traditional hot air drying (HAD). US-HAD reduced the drying time and achieved a final moisture content of 12%. Physicochemical analyses (colourimetry, total soluble solids, titratable acidity, and total phenolic content) were conducted on fresh fruit, powders, and fortified cookies. US-HAD cookies exhibited promising antioxidant activity, with ABTS values ranging from 8.049 to 8.536 mmol TEAC/100 g and DPPH values from 8.792 to 9.232 mmol TEAC/100 g, significantly higher than control cookies. The TPC was 13.033 mgGAE/g in HAD cookies and 13.882 mgGAE/g in US-HAD cookies. UHPLC-ESI-MS analysis showed an increase in phenolic compounds content in fortified cookies compared to the control. Sensory analysis highlighted a superior blackberry flavour and overall acceptability in US-HAD cookies, with statistical analysis confirming their superior nutritional and sensory qualities. Integrating US-HAD blackberry powder into cookies helps reduce food waste and enhances the nutritional profiles of baked goods, offering functional foods with health benefits. This work provides a scientific basis for developing enriched functional cookies, offering a healthy and sustainable alternative for utilising damaged fruits.

Formation of pores and bubbles and their impacts on the quality attributes of processed foods: A review

Pores and bubbles significantly influence the physical attributes (like texture, density, and structural integrity), organoleptic properties, and shelf life of processed foods. Hence, the quality of foods and their acceptance by the consumers could be influenced by the properties and prevalence of pores and bubbles within the food structure. Considering the importance of pores, this review aimed to comprehensively discuss the factors and mechanisms involved in the generation of pores and bubbles during the processing of different food products. Moreover, the characteristics and effects of pores on the properties of chocolates, cheeses, cereal-based foods (like cake, puffed grains, and pasta), dried, and fried products were discussed. The impacts of bubbles on the quality of foam-based products, foam creamers, and beverages were also explored. This review concludes that intrinsic factors (like food compositions, initial moisture content, and porosity) and extrinsic factors (like applied technologies, processing, and storage conditions) affect various properties of the pores and bubbles including their number, size, orientation, and distribution. These factors collectively shape the overall structure and quality of processed food products such as density, texture (hardness, cohesiveness, chewiness), and water holding capacity. The desirability or undesirability of pores and their characteristics depends on the type of products; hence, some practical hints were provided to mitigate their adverse effects or to enhance their formation in foods. For example, pores could increase the nutrient digestion and reduce the shelf life of the products by enhancing the risk of fat oxidation and microbial growth. In conclusion, this study provides a valuable resource for food scientists and industry professionals by discussing the effects of pores on food preservation, heat, and mass transfer (including oxygen, moisture, flavors, and nutrients). Understanding the dynamic changes in porosity during processing will be effective in customization of final product quality with desired attributes, ensuring tailored outcomes for specific applications.

Effect of cellulase on dough structure and quality characteristics of tough biscuits enriched with potato whole flour

Potato whole flour is a promising way to improve the nutrition of tough biscuits, while its gluten-free characteristic was difficult to form acceptable texture properties. In this study, cellulase was used to degrade the cellulose in dough enriched with potato whole flour, so as to mitigate the interference of cellulose with the gluten network, resulting in forming the potato whole flour biscuit with great characteristics. Results indicated that cellulase within 0.2% led to the gradually reduced G' and G'' values of dough from 5.50×104 to 4.00×104 and 2.66×104 to 1.35×104, respectively. Cellulase at 0.2% resulted in the significantly increased tensile properties of the dough compared to the control. The incorporation of cellulase within 0.2% also led to the tightly ordered and intact network structure base on the results of SEM, disulfide bonds determination and FTIR. Those results indicated that cellulase was beneficial to improve the baking quality of dough, which was conductive to form tough biscuit with great characteristics. The hardness, crunchiness, crispness and specific volume analysis results confirmed that 0.2% cellulase resulted in the significantly decreased hardness by 45.25% and the significantly increased specific volume, crunchiness and crispness by 24.74%, 121.20% and 156.47%, respectively. Overall, cellulase ultimately improved the quality of the biscuits by improving the properties and structure of the dough. It was of great significance for the utilization of potato whole flour resources and the industrial production of its tough biscuits. PRACTICAL APPLICATION: The results showed that inclusion of cellulase led to the reduced hardness and increased crunchiness, crispness, and specific volume of potato whole flour tough biscuits. Cellulase could be used as a potential improver of tough biscuits. This study will provide guidance for practical uses of cellulase in improving potato whole flour dough and tough biscuit quality.

Unveiling the Chemistry of Citrus Peel: Insights into Nutraceutical Potential and Therapeutic Applications

The recent millennium has witnessed a notable shift in consumer focus towards natural products for addressing lifestyle-related disorders, driven by their safety and cost-effectiveness. Nutraceuticals and functional foods play an imperative role by meeting nutritional needs and offering medicinal benefits. With increased scientific knowledge and awareness, the significance of a healthy lifestyle, including diet, in reducing disease risk is widely acknowledged, facilitating access to a diverse and safer diet for longevity. Plant-based foods rich in phytochemicals are increasingly popular and effectively utilized in disease management. Agricultural waste from plant-based foods is being recognized as a valuable source of nutraceuticals for dietary interventions. Citrus peels, known for their diverse flavonoids, are emerging as a promising health-promoting ingredient. Globally, citrus production yields approximately 15 million tons of by-products annually, highlighting the substantial potential for utilizing citrus waste in phyto-therapeutic and nutraceutical applications. Citrus peels are a rich source of flavonoids, with concentrations ranging from 2.5 to 5.5 g/100 g dry weight, depending on the citrus variety. The most abundant flavonoids in citrus peel include hesperidin and naringin, as well as essential oils rich in monoterpenes like limonene. The peel extracts exhibit high antioxidant capacity, with DPPH radical scavenging activities ranging from 70 to 90%, comparable to synthetic antioxidants like BHA and BHT. Additionally, the flavonoids present in citrus peel have been found to have antioxidant properties, which can help reduce oxidative stress by 30% and cardiovascular disease by 25%. Potent anti-inflammatory effects have also been demonstrated, reducing inflammatory markers such as IL-6 and TNF-α by up to 40% in cell culture studies. These findings highlight the potential of citrus peel as a valuable source of nutraceuticals in diet-based therapies.

Effect of fortifying sorghum and wheat with Longhorn grasshopper (Ruspolia differens) powder on nutritional composition and consumer acceptability of biscuits

This study aimed at improving the nutrient composition and protein quality of biscuits made from sorghum and wheat through fortification with Longhorn Ruspolia differens powder (RDP) for use as a supplementary food targeting children vulnerable to protein-energy malnutrition (PEM). Ten biscuit formulations were prepared by replacing a part of wheat and sorghum-wheat flours with 5, 15, 20, and 40% RDP. To establish the nutrient content of biscuits, proximate and mineral compositions were determined. The amino acid composition, reactive lysine and in vitro protein digestibility were determined for protein quality. Compositing wheat or wheat-sorghum biscuits with RDP increased the protein, fat, ash, and crude fiber by percentages as high as 118, 37, 133, and 573%, respectively. Mineral content increased with, iron, zinc, and potassium as high as 161, 219, and 169%, respectively. The lysine, reactive lysine and in vitro protein digestibility of the fortified biscuits increased significantly, relative to the 100% cereal biscuits. Fortification with RDP significantly improved the amino acid content of the biscuits but had a marginal effect on improvement of the lysine score and did not meet the reference pattern for children aged 3-10 years. The Protein Digestibility Corrected Amino Acid Score (PDCAAS) of wheat-sorghum and wheat biscuits improved by 6% to 47% and 2% to 33%, respectively, compared to the control biscuits. The fortified biscuits were liked by the consumers. The RDP-fortified biscuits have the potential to alleviate PME in developing countries.

Composite formation of whey protein isolate and OSA starch for fabricating high internal phase emulsion: A comparative study at different pH and their application in biscuits

The composites formed by whey protein isolate (WPI) and octenyl succinate anhydride (OSA)-modified starch were characterized with a focus on the effect of pH, and their potential in fabricating high internal phase emulsions (HIPEs) as fat substitutes was evaluated. The particles obtained at pH 3.0, 6.0, 7.0, and 8.0 presented a nanosized distribution (122.04 ± 0.84 nm-163.24 ± 4.12 nm) while those prepared at pH 4.0 and 5.0 were remarkably larger. Results from the shielding agent reaction and Fourier transform infrared spectroscopy (FT-IR) showed that the interaction between WPI and OSA starch was mainly hydrophobic at pH 3.0-5.0, while there was a strong electrostatic repulsion at pH 6.0-8.0. A quartz crystal microbalance with dissipation (QCM-D) study showed that remarkably higher ΔD and lower Δf/n were observed at pH 3.0-5.0 after successive deposition of WPI and OSA starch, whereas slight changes were noted for those made at higher pH values. The WPI-OSA starch (W-O) composite-based HIPEs made at pH 3.0 and 6.0-8.0 were physically stable after long-term storage, thermal treatment, or centrifugation. Incorporation of HIPE into the biscuit formula yielded products with a desirable sensory quality.

Development of a novel cryostructured composite coating of xanthan-bovine collagen-oregano essential oil spraying applied for the preservation of commercial biscuits marketed in Mexico

Cryostructured gels, better known as cryogels, are a very important emerging class of biomaterials that have diverse applications in food preservation. This work shows a novel alternative to prepare a cryostructured composite coating made from a blend of xanthan, bovine collagen, and oregano essential oil. The composite coating was suitably applied onto the surface of preservative-free biscuits which were stored for 15 days at 25 ± 2°C and 52% ± 1% relative humidity. The evaluation focused mainly on the changes in the physicochemical, textural, and microbiological characteristics of the biscuits. It was found that the coated samples significantly (p < 0.05) decreased moisture absorption, water activity, and fungal growth. However, the composite coating minimally impacted the quality of biscuits in terms of color, texture profile, and surface microstructure. Overall, the cryostructured composite coating constitutes an advance in technological strategies aimed at the preservation of baked products. This will allow, in the future, the development of novel coatings on bakery products to generate new trends in the conservation of their properties and extension of shelf life. This could be achieved through the implementation of new technologies in the food industry, with the aim of making them more environmentally friendly and contributing to the generation of less plastic waste. PRACTICAL APPLICATION: The study and application of cryogels, as innovative systems in the food industry, allow to expand and diversify the materials that can function as coatings to maintain some quality characteristics, in this case in bakery products, so it is important to analyze their effects and consider them to improve conservation processes.

Modelling inactivation kinetics of free and encapsulated probiotic cells in millet biscuit under different baking conditions

The rising popularity of probiotic food in the diet for improved health benefits leads to the development of new probiotic functional foods. In general, biscuit is a long-shelf-life snack product that can be consumed straight from the pack without further processing. Although the development of probiotic bakery products is an innovative approach to market expansion, the infusion of probiotics in biscuits to produce probiotic biscuits has not been explored because of the complexity of the baking process. Therefore, this study aimed to evaluate the impact of baking conditions (160, 180, 200, and 220 °C) on the viability of free and encapsulated probiotic Lactobacillus acidophilus NCDC 016 cells by adding them into biscuit dough separately and baking for up to 600 sec. The cells were encapsulated using 20 % maltodextrin and 8.51 % gum arabic as a wall material and spray drying at an inlet and outlet air temperature of 150 and 55 ± 2 °C, respectively. At different baking temperatures (160, 180, 200, and 220 °C), the viability of probiotic (free and encapsulated) cells, the physicochemical properties of biscuits, and the inactivation kinetics of cells were examined by withdrawing samples every 120 sec. The survivability of encapsulated cells was observed to be higher than free cells at 160 and 180 °C for 600 sec. The moisture content and water activity were found to be higher and lower, respectively for encapsulated probiotic biscuits than for the biscuit containing free cells. The observed results of higher cell viability at 200 °C, 360 sec (5.38 log CFU/g) than at 180 °C, 600 sec (5.02 log CFU/g) can be explained by the time-temperature combination. Thus, producing the probiotic biscuit at baking conditions of 200 °C and 360 min is possible, providing the cell viability of 5 log CFU/g of probiotic biscuit. Further, the inactivation kinetics of cells were predicted by log-linear, Weibull, log-logistic, Gompertz, and Buchanan models. Under all baking conditions, the log-linear model was the best model for describing the data of encapsulated and free cells.

Baby, children, and adult biscuits. Differences in nutritional quality and naturalness

This study examined and compared the nutritional quality and degree of naturalness between baby biscuits (<3 years), children biscuits (>3 years), and adult biscuits. Mintel's Global New Products Database was searched for "Baby Biscuits & Rusks" and "Sweet Biscuits/Cookies" (re)launched between July 2019 and July 2022 in four European countries (Germany, the Netherlands, Spain, and the United Kingdom), which resulted in 1280 products to be analyzed. Nutritional quality was measured by means of nutrient values per 100 g, and baby biscuits were assessed for compliance with the World Health Organization's latest Nutrient and Promotion Profile Model (NPPM). Degree of naturalness was measured using the food naturalness index (FNI). Baby biscuits had the best nutritional quality and were the most natural as compared to children and adult biscuits, but their energy density and sugar content require further attention. Nutritional quality was comparably poor in children and adult biscuits, and children biscuits were the least natural of the three groups. The NPPM requirements of not adding any free sugar at all to baby biscuits may drive parents to purchase alternative sweeter biscuits originally formulated and meant for children and adults. Reasonable regulations are needed to support product (re)formulations and to improve the current market food offer for babies and children.

Regulating the composition and secondary structure of wheat protein through canopy shading to improve dough performance and nutritional index

Viscoelastic properties of gluten proteins critically determine the biscuit-making quality. However, cultivar genetics and light conditions closely regulate the composition of the gluten proteins. The impact of pre- and post-anthesis shading (60 %) on amino acid profile, gluten protein composition, secondary structure, dough performance, and biscuit-making quality were evaluated using four wheat cultivars that differ in gluten protein composition. Pre- and post-anthesis shading increased the contents of gliadin, by 35.8 and 3.1 %; glutenin, by 27.6 and 7.3 %; and total protein, by 21.7 and 10.6 %, respectively, compared with those of unshaded plants. Conversely, the ratios of glutenin/gliadin, ω-/(α,β + γ)-gliadin, and high-molecular-weight/low-molecular-weight glutenin subunits decreased with shading. Strong-gluten cultivars exhibited smaller declines in these parameters than weak-gluten cultivars. Secondary structure analysis of the wheat protein revealed that shading increased β-sheet content but decreased β-turn content. Changes in protein components and their secondary structures caused an increase in wet gluten content, dough development time, and gluten performance index, thereby decreasing the biscuit spread ratio. Shading stress increased the protein content and nutrition index but decreased the biological value of protein by 2.5 %. Transcriptomic results revealed that shading induced 139 differentially expressed genes that decreased carbohydrate metabolism and increased amino acid metabolism, involved in increased protein content. Thus, canopy shading improves dough performance and nutrition index by regulating the amino acid profiles, protein compositions, and secondary structures. The study provides key insights for achieving superior grain quality under global dimming.

Investigating Bioaccessibility of Advanced Glycation Product Precursors in Gluten-Free Foods Using In Vitro Gastrointestinal System

Background and Objectives: Gluten-free products have been produced as part of medical therapy and have gained popularity among individuals seeking weight loss or healthier dietary options. Assessing the potential risks associated with these products is essential in optimizing their compositions and developing new dietetic approaches. This study aimed to determine the glyoxal (GO) and methylglyoxal (MGO) contents in gluten-free bread, biscuits, and cookies and to examine their bioaccessibility using an in vitro gastrointestinal model. Materials and Methods: A total of 26 gluten-free and 19 gluten-containing (control) products were analyzed for their GO and MGO levels utilizing a high-performance liquid chromatography (HPLC) device. Results: Post-digestion, the GO and MGO values increased significantly across all food groups compared with pre-digestion values (p < 0.05), and the bioaccessibility exceeded 100%. Specifically, gluten-free bread exhibited higher post-digestion GO and MGO values than the control group (p < 0.05). Conversely, gluten-containing biscuits and cookies had higher post-digestion GO and MGO values compared to gluten-free products (p < 0.05). Conclusions: The detection of precursors to advanced glycation end products (AGEs) in gluten-free products has drawn attention to the potential health risks associated with their consumption. Therefore, reevaluation of the formulations and technologies used in these products and the introduction of new strategies are crucial in mitigating AGE content.

Utilization of fish protein isolates to supplement oat-based cookies and assessment of end product quality

Bullseye and Pacu fish processing waste were valorized through its conversion into functional protein isolates, followed by the utilization of recovered proteins to supplement oat-based cookies at different levels (0, 2, 4, 6, 8 and 10 g/100 g) and baking temperatures (100, 150, 170, 180, 190 ˚C). With different replacement ratios and baking temperatures, the best selection was made at (4 and 6%) and baking temperatures (160 and 170 ˚C) for BPI (Bullseye protein isolate) and PPI (Pacu protein isolate) based cookies, respectively based on sensory and textural characteristics. The developed products were analyzed for its nutritional, physical, textural, and sensory quality. No significant differences were found in the moisture and ash contents of the cookies from different lots, while the protein content was highest for cookies with 6% PPI. The spread ratio was lower reported for the control cookies compared to the fish protein isolate-based counterpart (p < 0.05), and it decreased with increasing thickness of cookies. Significantly higher total essential amino acid values were obtained in cookies supplemented with 6% Pacu protein isolates, whereas 4% Bullseye protein isolate-supplemented cookies were higher in total non-essential amino acid content. The total plate count was higher in control cookies (0.35 ± 0.33 cfu/g) compared to fish protein isolate-supplemented cookies. The hardness values were maximum for control group cookies (19.14 ± 0.98 N) compared to protein isolate incorporated cookies (17.22 ± 1.05 N and 16.26 ± 0.9 N). However, the difference among the all-treatment group is not significant (p > 0.05).

Effect of Mixing Time on Properties of Whole Wheat Flour-Based Cookie Doughs and Cookies

This study investigated if whole wheat flour-based cookie dough's physical properties were affected by mixing time (1 to 10 min). The cookie dough quality was assessed using texture (spreadability and stress relaxation), moisture content, and impedance analysis. The distributed components were better organized in dough mixed for 3 min when compared with the other times. The segmentation analysis of the dough micrographs suggested that higher mixing time resulted in the formation of water agglomeration. The infrared spectrum of the samples was analyzed based on the water populations, amide I region, and starch crystallinity. The analysis of the amide I region (1700-1600 cm^-1) suggested that β-turns and β-sheets were the dominating protein secondary structures in the dough matrix. Conversely, most samples' secondary structures (α-helices and random coil) were negligible or absent. MT3 dough exhibited the lowest impedance in the impedance tests. Test baking of the cookies from doughs mixed at different times was performed. There was no discernible change in appearance due to the change in the mixing time. Surface cracking was noticeable on all cookies, a trait often associated with cookies made with wheat flour that contributed to the impression of an uneven surface. There was not much variation in cookie size attributes. Cookies ranged in moisture content from 11 to 13.5%. MT5 (mixing time of 5 min) cookies demonstrated the strongest hydrogen bonding. Overall, it was observed that the cookies hardened as mixing time rose. The texture attributes of the MT5 cookies were more reproducible than the other cookie samples. In summary, it can be concluded that the whole wheat flour cookies prepared with a creaming time and mixing time of 5 min each resulted in good quality cookies. Therefore, this study evaluated the effect of mixing time on the physical and structural properties of the dough and, eventually, its impact on the baked product.

Biscuits Enriched with Monofloral Bee Pollens: Nutritional Properties, Techno-Functional Parameters, Sensory Profile, and Consumer Preference

Bee pollens are potential functional food ingredients as they contain essential nutrients and a wide range of bioactive compounds. The aim of this study was to investigate the effects of enrichment with monofloral bee pollens on the nutritional properties, techno-functional parameters, sensory profile, and consumer preference of biscuits. Biscuits were prepared according to the AACC-approved method by substituting wheat flour with pollens of rapeseed (Brassica napus L.), phacelia (Phacelia tanacetifolia Benth.) and sunflower (Helianthus annuus L.) at 2%, 5% and 10% levels. The macronutrient composition of the biscuits was determined: crude protein content (Kjeldahl method), crude fat content (Soxhlet extraction), ash content (carbonization), moisture content (drying), carbohydrate content (formula). Their total phenolic content (TPC) and in vitro antioxidant capacity (FRAP, TEAC, DPPH) were determined spectrophotometrically. The colour of the biscuits was measured using a tristimulus-based instrument, and their texture was characterized by using a texture analyser. Sensory profile of biscuits was determined by qualitative descriptive analysis (QDA). The consumer acceptance and purchase intention of the biscuits were also evaluated, based on the responses of 100 consumers. Additionally, an external preference map was created to illustrate the relationship between consumer preference and the sensory profile of the biscuits, and penalty analysis was conducted to identify directions for product development. Phacelia pollen appeared to be the most effective for improving the nutritional quality of biscuits. The addition of phacelia pollen at the 10% substitution level increased the protein content and TPC of the control biscuit by 21% and 145%, respectively. Significant changes (p < 0.05) were also observed regarding the colour and texture of biscuits. The results of the QDA revealed that biscuits containing pollens of different botanical sources have heterogeneous sensory attributes. The biscuit containing sunflower pollen at the 2% substitution level was preferred the most (overall liking = 6.9 ± 1.6), and purchase intentions were also the highest for this product. Based on the results of the present study, it is recommended to use sunflower pollen for developing pollen-enriched foods in the future.

Effects of Different Fertilizer Treatments, Environment and Varieties on the Yield-, Grain-, Flour-, and Dough-Related Traits and Cookie Quality of Weak-Gluten Wheat

Weak-gluten wheat is the main raw material for crisp and soft foods such as cookies, cakes, and steamed breads in China. However, it remains challenging to find an appropriate fertilization regime to balance the yield and quality of wheat for special uses (such as cookie making). Here, four nitrogen (N) fertilizer treatments were compared in terms of effects on the yield-, grain-, flour-, and dough-related traits and cookie quality of nine weak-gluten wheat varieties. Compared with other treatments, the treatment M (which had 180 kg ha^-1 N fertilizers with basal fertilizer:tillering fertilizer:jointing fertilizer = 5:1:4) was a superior fertilization strategy as it could ensure a higher yield (4.46 kg block^-1) and proper traits related to cookie quality. Moreover, environmental conditions and wheat genotypes exhibited significant effects on many quality-related traits. The quality of Chinese crisp biscuits showed a significant association with unit weight, redness, and solvent retention capacity in lactic acid solution, while that of American cookies was influenced by thousand-grain weight, hardness, rate of yield flour, and formation time as indicated by the Mantel test. Additional Pearson correlation analysis demonstrated that thousand-grain weight, hardness, and rate of yield flour can affect the quality of American cookies. Our findings demonstrate that it is necessary to comprehensively consider local conditions, variety selection, and optimal fertilization to achieve high-quality weak-gluten wheat for cookie making.

Development of Fermented Sweet Potato Flour (Ipomoea batatas L.) Supplemented with Mackerel (Scomber scombrus) Meal-Based Biscuits

The fermentation of sweet potato (Ipomoea batatas L.) with a strain of Lactobacillus plantarum leads to an increase in its exopolysaccharides (EPS) content which is useful for enhancing the functional properties of flour. The objective of this study was to develop healthy and nutritious meal-based biscuits from fermented sweet potato (FSP) flour supplemented with mackerel flour. Eleven formulations containing wheat flour, FSP flour, nonfermented sweet potato (NFSP) flour, and mackerel flour at different proportions defined following a mixture design were used to prepare biscuits. Physicochemical, microbiological, and sensory analyses of the different biscuits were performed. Biscuits prepared with FSP at 100% scored the lowest lipid ( $10.83\pm 0.97\text{g}/100\text{g}\text{DM}$ ) and the highest sugar ( $67.43\pm 0.64\text{g}/100\text{g}\text{DM}$ ) contents. The incorporation of mackerel flour in the formulation led to a significant ( $p<0.05$ ) increase in the protein and mineral contents of biscuits thus conferring an immune-boosting property to these latters. All the biscuits were of good microbiological quality independent of the formulation. The highest DPPH free radicals scavenging activity (IC50 of 1.90 and 3.41 μg/mL for ethanolic and methanolic extracts, respectively) were observed with biscuits prepared with FSP flour at 100%. The sensorial characteristics of biscuits prepared with equal proportions of wheat and FSP flours were highly appreciated by the panelists with scores close to the ones prepared with wheat flour at 100%. The results of this study demonstrate the potential of FSP flour as a substitute for wheat flour in biscuits preparation. It also suggests biscuits prepared with FSP flour supplemented with mackerel flour as a functional and immune-boosting food.

Nutritional Quality and Safety Characteristics of Imported Biscuits Marketed in Basrah, Iraq

The ingredients and the preparation methods influence biscuit quality and safety. In Iraq, biscuit imports are increasing every year, but no information is available in the scientific literature on their quality and safety features. This work analyzed three types of biscuits (cookies, crackers, and digestives) sampled in the Basrah markets (Iraq) but produced in Spain, Iran, Turkey, and United Arab Emirates. Nine different brands were considered for each country of origin (n = 36), with three replicates per sample. Moisture, ash, fat, proteins, fiber, water activity, peroxide value, 5-hydroxymethyl-2-furfural (HMF), acrylamide, heavy metals, and microbial load were analyzed. All the nutritional parameters were significantly influenced by the variables “Biscuit type” and “Country”. Cookies showed significantly higher fat content and lower protein content than crackers and digestives, as well as higher peroxide value (which was below the limit set by the FAO/WHO within the World Wood Program). Spanish samples had more fat and fewer proteins than biscuits made in other countries. Very high variability was observed in HMF (from not detected to 62.08 mg/kg) and AA content (reaching 1421.8 μg/kg). Cadmium was always absent, and lead was considerably below the allowed limit. Yeasts and molds were above the limits in five samples.

Optimized Cellulase-Hydrolyzed Deoiled Coconut Cake Powder as Wheat Flour Substitute in Cookies

Deoiled coconut cake powder (DCCP) was hydrolyzed to reduce the ratio of insoluble/soluble dietary fiber (RIS) by partially converting insoluble dietary fiber to soluble using Celluclast 1.5 L, a commercial cellulase preparation in citrate buffer medium. Firstly, the influence of citrate buffer amount, enzyme concentration, pH, and retention time on the enzymatic hydrolysis efficiency was investigated. Then, response surface methodology (RSM) was employed to optimize the process in which the insoluble and soluble dietary fiber contents were the responses. The results revealed that 10.3 g buffer/g of materials, 3.7 U/g of the materials, and 60 min of retention time were the optimal conditions for the enzymatic hydrolysis to obtain the insoluble and soluble contents of 68.21%db and 8.18%db, respectively. Finally, DCCP or hydrolyzed DCCP (HDCCP) was partially substituted for wheat flour at different replacement ratios in a cookie recipe at 0, 10, 20, 30, and 40%. The cookies with a 10% replacement ratio of hydrolyzed deoiled coconut cake powders had a lower RIS by more than two folds those of DCCP and had the same sensorial score as the control sample. This study proposed that Celluclast 1.5 L effectively reduced RIS by partially converting insoluble to soluble dietary fiber, improving the soluble dietary fiber content in fiber-enriched cookies.

Mitigation of Acrylamide Content in Biscuits through Combined Physical and Chemical Strategies

Acrylamide in biscuits represents a major concern. This research work was aimed at modifying the current formulation of biscuits to reduce the acrylamide content while maintaining the chemical, physical, and sensory characteristics of the original product. A strategy based on the FoodDrinkEurope Acrylamide Toolbox was adopted. The content of the leavening agent ammonium bicarbonate, the baking temperature program, and the time duration of steam released during the baking process were the three factors evaluated through a factorial design of experiment. The partial replacement of ammonium bicarbonate (from 9.0 g to 1.5 g per 500 g of flour) with sodium bicarbonate (from 4.5 g to 12.48 g), lowering of the temperature in the central phase of the baking process (from 170 °C to 150 °C), and the release of steam for 3 min resulted in an 87.2% reduction in acrylamide concentration compared to biscuits of reference. CIELab color indices and a_w were the parameters that showed the most significant correlation with acrylamide concentration in biscuits and could, therefore, become markers to predict the acrylamide content along production lines for an instant evaluation.

Relationship between the microstructure and physical properties of emulsifier based oleogels and cookies quality

In this paper, the correlation between microstructure and physical properties of emulsifier based oleogels and qualities of cookies, as well as the key factors affecting cookies hardness was studied by using four kinds of food-grade emulsifiers with different concentrations. Monoacylglycerol (MAG) and sorbitan monostearate (SPAN) cookies showed similar hardness and L*, a*, b* to those of shortening cookies, in the concentration range of 6-15% and 12-18%, respectively, and their cross sections are uniformly porous. The solid fat content and α crystals content of emulsifier based oleogels showed no significant effect on cookie hardness. Besides, oleogel cookies prepared with emulsifier gelators with higher hydrophile-lipophile balance value showed lower hardness. In the results, higher shear viscosity (at 25 °C) of emulsifier based oleogels were determined to be the key factor for softer cookies. This study provides theoretical support for the quality control of novel cookies with emulsifier based oleogels.

Effect of Durum Wheat Oil on the Physico-Chemical and Sensory Features of Biscuits

Lipids play an important role in defining the overall quality of biscuits, particularly in terms of resistance to oxidation, as well as for their influence on textural and sensorial properties. The aim of this work was to investigate the effects of durum wheat oil on the physico-chemical and sensory features of biscuits. Control biscuits (C) prepared with the commonly used sunflower oil were compared with samples prepared with durum wheat oil at 50% (D50) and 100% replacement levels (D100). The reformulated biscuits were very rich in tocols, especially tocotrienols (982.9, 635.2, and 64.1 mg/kg on lipid fraction weight in D100, D50, and C, respectively). The higher content of antioxidants extended the resistance to the oxidation of biscuits (induction time = 53.61, 70.87, and 79.92 h in C, D50, and D100, respectively). D100 showed the lowest amounts of triacylglycerol oligopolymers and oxidized triacylglycerols, and the lowest amounts of the volatile markers of lipid oxidation (hexanal and nonanal). The use of durum wheat oil did not affect the sensorial and textural properties, compared to C. This study suggests that durum wheat oil could be effectively used in biscuit-making to decrease the oxidative phenomena and increase the bioactives of the end-products.

Decision Tree of Materials: A Model of Halal Control Point (HCP) Identification in Small-Scale Bakery to Support Halal Certification

A bakery is a business that bakes flour-based foods, including bread, cookies, cakes, pastries, and pies, and sells them. Some bakeries are also categorized as large scale, medium scale, and small scale. Halal embraces all food category; bakery product can satisfy the challenge and opportunity of halal food segment market. The small-scale bakery will benefit from creating a halal certification to attract new customers. The first stage of submission for halal certification is identifying Halal Control Points (HCP) of materials and production. The material tracing uses a decision tree. The purpose of this study is to identify HCP in materials and production processes and provide alternative improvements. Identification of HCP in material decision trees to determine contains non-HCP (halal) material, HCP material, and haram (forbidden) material. Happy Cake bakery uses 75% non-HCP (halal) materials and 25% HCP (noncertified halal) materials from 80 ingredients. Bakery Canggi Fully has 83.3% halal materials and 16.6% noncertified halal materials from 24 ingredients. Bakery MacCheese has 79% of halal materials and 21% of noncertified halal materials from 43 ingredients. The decision tree makes it very easy to identify the halal status of ingredients. The HCP ingredients need to be replaced with clearly halal ingredients. Substitution of HCP material to halal-certified ingredients may affect production costs, product quality, and profit. Therefore, it is necessary to choose a suitable halal material. Halal certification requires a high commitment of small-scale bakery businesses.

Reducing Nitrogen Rate and Increasing Plant Density Accomplished High Yields with Satisfied Grain Quality of Soft Wheat via Modifying the Free Amino Acid Supply and Storage Protein Gene Expression

In a 2 yr field experiment, we investigated the combined effects of reduced nitrogen (N) rate and increased plant density on the trade-off between the grain protein content (GPC) and the grain yield (GY) in soft wheat cultivars. Reducing N application significantly decreased both GPC and GY; however, to some extent, increasing the top-dressed N ratio and plant density compensated for the GY loss. Optimizing the combination of these three factors (150 kg N ha^-1 with 50% top-dressed N and 360 × 10⁴ plants ha^-1) achieved both the required lower GPC for soft wheat and relatively higher GY compared with the conventional cultivation strategy. In addition, this optimized combination downregulated 11 high-molecular-weight glutenin subunits, 8 low-molecular-weight glutenin subunits, 5 α/β-gliadins, and 2 γ-gliadins in mature grains as identified by data-independent acquisition mass spectrometry. Further analysis indicated that the relatively lower free amino acid content and downregulated expressions of the seed storage protein (SSP) synthesis-related genes in filling grains contributed to the reduction of SSP and GPC. Furthermore, the dilution effect induced by a relatively higher accumulation of starch than proteins also partially explained the reduced GPC. Unlike proteins, grain starch accumulation and content depended more on the soluble sugar availability, rather than on the starch synthesis capacity. These findings provide novel insights on simultaneous improvement in the grain quality and yield of soft wheat through synchronized manipulations of N fertilization and plant density.

A review combining emerging techniques with classical ones for the determination of biscuit quality: advantages and drawbacks

The production of biscuit and biscuit-like products has faced many challenges due to changes in consumer behavior and eating habits. Today's consumer is looking for safe products not only with fresh-like and pleasant taste, but also with long shelf life and health benefits. Therefore, the potentiality of the use of healthier fat and the incorporation of natural antioxidant in the formulation of biscuit has interested, recently, the attention of researchers. The determination of the biscuit quality could be performed by several techniques (e.g., physical, chemical, sensory, calorimetry and chromatography). These classical analyses are unfortunately destructive, expensive, polluting and above all very heavy, to implement when many samples must be prepared to be analyzed. Therefore, there is a need to find fast analytical techniques for the determination of the quality of cereal products like biscuits. Emerging techniques such as near infrared (NIR), mid infrared (MIR) and front face fluorescence spectroscopy (FFFS), coupled with chemometric tools have many potential advantages and are introduced, recently, as promising techniques for the assessment of the biscuit quality.

Composite Flour from Indonesian Local Food Resources to Develop Cereal/Tuber Nut/Bean-Based Ready-to-Use Supplementary Foods for Prevention and Rehabilitation of Moderate Acute Malnutrition in Children

Undernourishment is a threat to human health. The prevalence of undernourishment remains alarming, especially among children under five years old in many countries, including Indonesia. Nowadays, the handling of undernourishment has shifted to treatment outside the hospital, utilizing local nutrient-rich foods. At the national level, the utilization of local food resources is a part of the promotion of dietary diversification and the bioeconomy. Ready-to-use supplementary food (RUSF) refers to supplementary foods aimed at improving the nutrition of moderate acute malnutrition (MAM) children under five years old. RUSF biscuit recipes were made using local food resources available in Banten province, Indonesia. To optimize the nutritional profile of the developed RUSF, taro/talas banten were mixed with ground-nut/peanut (Arachis hypogaea L.) and mungbean (Vigna radiata) as protein and lipid sources and red rice (Oryza longistaminata) and maize (Zea mays) as carbohydrate sources, and enriched by the local banana Nangka (Musa textilia). Two formulations were selected for the pilot testing, namely the taro-peanut and taro-peanut/mungbean RUSF biscuits, made from taro Banten, cereal, peanut and/or mungbean, and local banana. The RUSF biscuit showed promising results, presenting a high level of acceptance and a macronutrient composition that meets the standards for MAM children. However, the RUSF biscuits should be fortified with micronutrient premix to fulfill the dietary requirement for the MAM children. The results of this study provide further development opportunities.

Biscuit Contaminants, Their Sources and Mitigation Strategies: A Review

The scientific literature is rich in investigations on the presence of various contaminants in biscuits, and of articles aimed at proposing innovative solutions for their control and prevention. However, the relevant information remains fragmented. Therefore, the objective of this work was to review the current state of the scientific literature on the possible contaminants of biscuits, considering physical, chemical, and biological hazards, and making a critical analysis of the solutions to reduce such contaminations. The raw materials are primary contributors of a wide series of contaminants. The successive processing steps and machinery must be monitored as well, because if they cannot improve the initial safety condition, they could worsen it. The most effective mitigation strategies involve product reformulation, and the use of alternative baking technologies to minimize the thermal load. Low oxygen permeable packaging materials (avoiding direct contact with recycled ones), and reformulation are effective for limiting the increase of contaminations during biscuit storage. Continuous monitoring of raw materials, intermediates, finished products, and processing conditions are therefore essential not only to meet current regulatory restrictions but also to achieve the aim of banning dietary contaminants and coping with related diseases.

Curcumin Extraction, Isolation, Quantification and Its Application in Functional Foods: A Review With a Focus on Immune Enhancement Activities and COVID-19

An entirely unknown species of coronavirus (COVID-19) outbreak occurred in December 2019. COVID-19 has already affected more than 180 million people causing ~3.91 million deaths globally till the end of June 2021. During this emergency, the food nutraceuticals can be a potential therapeutic candidate. Curcumin is the natural and safe bioactive compound of the turmeric (Curcuma longa L.) plant and is known to possess potent anti-microbial and immuno-modulatory properties. This review paper covers the various extraction and quantification techniques of curcumin and its usage to produce functional food. The potential of curcumin in boosting the immune system has also been explored. The review will help develop insight and new knowledge about curcumin's role as an immune-booster and therapeutic agent against COVID-19. The manuscript will also encourage and assist the scientists and researchers who have an association with drug development, pharmacology, functional foods, and nutraceuticals to develop curcumin-based formulations.

Plastic Cutlery Alternative: Case Study with Biodegradable Spoons

Plastics are mixtures of organic polymers that play a major role in environmental contamination worldwide. One way to reduce the waste arising from the use of plastics, especially disposable ones, can be to produce environmentally friendly cutlery. The aim of the work was the production of biodegradable spoons and evaluation of their texture, antioxidant activities and total polyphenols content. The spoons were made from a combination of the following ingredients: water, grape, proso millet, wheat, xanthan and palm oil in different concentrations. The samples were baked at 180 or 240 °C, some spoons were dried in a fruit dehydrator. According to the results of the analysis, a spoon prepared from a mixture of all three flours and with the addition of xanthan appears to be the most suitable replacement for plastic cutlery. This spoon showed high strength and antioxidant activity. It was confirmed that the use of grape flour has a beneficial effect on the nutritional profile of the experimentally produced biodegradable spoons.

The role of sodium chloride in the sensory and physico-chemical properties of sweet biscuits

Salt is included in many foods which consumers do not regard as salty. This "hidden-salt" may offer functional benefits but is often overlooked in sodium reduction strategies. This study investigated its role in shortbread-like sweet biscuits (1.05 g NaCl/100 g). Sensory tests revealed significant flavour and texture differences after a salt reduction of 33% (0.86 g/ 100 g). This was explained by differences in the partitioning of hydrophobic aroma compounds into the headspace and a significant impact on structure. Texture analysis and X-ray-µCT measurements revealed a reduced hardness with larger and more air cells in salt-reduced biscuits. It is suggested that salt impacts on cereal proteins by altering their aggregation around flour particles and at bubble walls and that slower water loss occurs in salted matrices during baking. Hence, this study revealed the key properties significantly affected by salt reduction and proposes an explanation which will help to develop a targeted "hidden-salt" reduction strategy.