Phenotypic properties and genotyping analysis of Bacillus cereus group isolates from dairy and potato products

The Germination and Growth of Two Strains of Bacillus cereus in Selected Hot Dishes After Cooking

The aim of this study was to assess the germination and growth of two strains of Bacillus cereus following the artificial inoculation of six selected hot dishes with spores which were then stored at temperatures of 40, 50, and 60 °C for 0.5, 1.0, 2.0, 2.5, 3.0, and 4.0 h. The water activity of the prepared meals varied between 0.967 and 0.973 and the salt content between 0.74 and 1.40%. The pH value of four dishes exceeded 6.0, but for two (tomato sauce and ratatouille) it was 4.6. The tested strain DSM 4312 showed good growth abilities and attained a population exceeding 6.0 log CFU/g within 4 h at 40 °C in foods with pH values > 6.0. The study demonstrated that a drop in food temperatures to 40 °C is risky, while no growth of B. cereus was detected within 4 h at 50 and 60 °C. The growth rate of B. cereus is conditioned not merely by environmental conditions (temperature, pH values, food composition), but also by the bacterial strain.

Potential Virulence and Survival of Acid-Resistant Bacillus cereus KS100Bc Isolated from Foodservice Establishments in Korea

Bacillus cereus is an opportunistic pathogen causing food poisoning manifested by diarrheal or emetic syndromes. This study aimed to examine the potential virulence and survival of acid-resistant B. cereus strains isolated from foodservice establishments in schools. All isolates were positive for genes encoding nonhemolytic enterotoxin complexes, except for one strain that lacked nheC. More than 80% of the strains harbored enterotoxigenic genes. In contrast, cesB, which encodes an emetic toxin, was not detected. Among the isolates, the biofilm-forming activity of KS100Bc strain was 8.4 times higher than that of the type strain; therefore, KS100Bc was selected for further analyses. The KS100Bc survived in simulated gastric fluid (SGF) at pH 2.0 for 120 min, which is a major host barrier against exogenous microorganisms. The parameter Kmax of the log-linear + tail model for ATCC 14579 was up to1.31-fold higher than that for KS100Bc in SGF, indicating that it is difficult to inactivate KS100Bc in acidic gastric environments. Although whole-genome sequencing identified nucleotide sequences with high homology (>99%) between ATCC 14579 and KS100Bc, significant differences were observed in phenotypes such as biofilm formation and survival in SGF. The transcriptional profiles were compared to examine the differences in the response to acid shock. KS100Bc exhibited increased expression of genes associated with pH homeostasis, oxidative response, metabolic rearrangements, and general stress response with over twofold (P value < 0.05) relative gene expression compared with the type strain. These results suggest that identifying the characteristics of the acid-adapted isolate can broaden our understanding of therapeutic strategies and provide new directions for controlling and preventing the spread of an outbreak.

Potential risk of biofilm-forming Bacillus cereus group in fresh-cut lettuce production chain

Bacillus cereus and Bacillus thuringiensis, which belong to the B. cereus group, are widely distributed in nature and can cause food poisoning symptoms. In this study, we collected 131 isolates belonging to the B. cereus group, comprising 124B. cereus and seven B. thuringiensis isolates, from fresh-cut lettuce production chain and investigated their potential risk by analyzing genotypic (enterotoxin and emetic toxin gene profiles) and phenotypic (antibiotic susceptibility, sporulation, and biofilm formation) characteristics. Enterotoxin genes were present only in B. cereus, whereas the emetic toxin gene was not detected in any of the B. cereus isolates. All isolates were susceptible to vancomycin, which is a last resort for treating B. cereus group infection symptoms, but generally resistant to β-lactam antimicrobials, and had the ability to form spores (at an average sporulation rate of 24.6 %) and biofilms at 30 °C. Isolates that formed strong biofilms at 30 °C had a superior possibility of forming a dense biofilm by proliferating at 10 °C compared to other isolates. Additionally, confocal laser scanning microscopy (CLSM) images revealed a notable presence of spores within the submerged biofilm formed at 10 °C, and the strengthened attachment of biofilm inner cells to the substrate was further revealed through biofilm structure parameters analysis. Collectively, our study revealed the prevalence and contamination levels of B. cereus and B. thuringiensis at fresh-cut lettuce production chain and investigated their genotypic and phenotypic characteristics, aiming to provide valuable insights for the development of potential risk management strategies to ensure food safety, especially along the cold chain.

Inactivation of Bacillus cereus spores by ohmic heating: Efficiency and changes of spore biological properties

Bacillus cereus spores pose a significant concern during food processing due to their high resistance to environmental stress. Ohmic heating (OH) is an emerging and alternative heating technology with potential for inactivating such spores. This study evaluated the inactivation effects and the biological property changes of Bacillus cereus spores during OH treatments. OH effectively inactivated spores in milk, orange juice, broth, rice soup, and buffer solution in less time than oil bath heating (OB). A decrease in NaCl content improved spore inactivation at the same temperature. Spores were more sensitive to acid at 80-85 °C with OH treatment. Furthermore, OH at 10 V/cm and 50 Hz could reduce the spore resistance and inhibit an increase in spore hydrophobicity and spore aggregation. Both heating methods resulted in significant dipicolinic acid (DPA) leakage and damage to the cortex and inner membranes of the spores. However, OH at 10 V/cm and 50 Hz had the lowest DPA leakage and inflicted the least damage to the inner membrane. The damage to the spore's inner membrane was considered the primary reason for inactivation by OB and OH treatments. Still, OH at 10 V/cm and 50 Hz might also block the germination or outgrowth of treated spores or cause damage to the spore core.

Get to Know Your Neighbors: Characterization of Close Bacillus anthracis Isolates and Toxin Profile Diversity in the Bacillus cereus Group

Unexpected atypical isolates of Bacillus cereus s.l. occasionally challenge conventional microbiology and even the most advanced techniques for anthrax detection. For anticipating and gaining trust, 65 isolates of Bacillus cereus s.l. of diverse origin were sequenced and characterized. The BTyper3 tool was used for assignation to genomospecies B. mosaicus (34), B. cereus s.s (29) and B. toyonensis (2), as well as virulence factors and toxin profiling. None of them carried any capsule or anthrax-toxin genes. All harbored the non-hemolytic toxin nheABC and sphygomyelinase spH genes, whereas 41 (63%), 30 (46%), 11 (17%) and 6 (9%) isolates harbored cytK-2, hblABCD, cesABCD and at least one insecticidal toxin gene, respectively. Matrix-assisted laser desorption ionization-time of flight mass spectrometry confirmed the production of cereulide (ces genes). Phylogeny inferred from single-nucleotide polymorphisms positioned isolates relative to the B. anthracis lineage. One isolate (BC38B) was of particular interest as it appeared to be the closest B. anthracis neighbor described so far. It harbored a large plasmid similar to other previously described B. cereus s.l. megaplasmids and at a lower extent to pXO1. Whereas bacterial collection is enriched, these high-quality public genetic data offer additional knowledge for better risk assessment using future NGS-based technologies of detection.

Early Growth Patterns of Bacillus cereus on Potato Substrate in the Presence of Low Densities of Black Soldier Fly Larvae

Bacillus cereus is a common and ubiquitous bacterium that can cause foodborne illnesses in humans and other animals. Common methods of contact between foodborne pathogens and their victims include exposure through contaminated food or food containment products. Using larvae of black soldier flies, Hermetia illucens, for biological conversion of wastes into components of animal feeds is a rapidly growing technology. However, contamination of larval biomass with pathogenic microorganisms may challenge its use on an industrial scale. We conducted laboratory experiments to test the effects of the black soldier fly larvae developing on simulated potato waste substrate on B. cereus abundance. We observed a general increase in the number of colony-forming units and concentration of hblD - gene when the larvae were present in the substrate, although the effect was modulated by larval densities and time since inoculation. It is possible that starch breakdown by black soldier fly larvae may provide a beneficial environment for B. cereus. Our results differ from the suppression in the presence by black soldier fly larvae reported for several other bacterial species and highlight the importance of taking proper food safety measures when using this technology.

Microbial community niches on microplastics and prioritized environmental factors under various urban riverine conditions

Microplastics (MPs) provide habitats to microorganisms in aquatic environments; distinct microbial niches have recently been elucidated. However, there is little known about the microbial communities on MPs under urban riverine conditions, in which environmental factors fluctuate. Therefore, this study investigated MP biofilm communities under various urban riverine conditions (i.e., organic content, salinity, and dissolved oxygen (DO) concentration) and evaluated the prioritized factors affecting plastisphere communities. Nine biofilm-forming reactors were operated under various environmental conditions. Under all testing conditions, biofilms grew on MPs with decreasing bacterial diversity. Interestingly, biofilm morphology and bacterial populations were driven by the environmental parameters. We found that plastisphere community structures were grouped according to the environmental conditions; organic content in the water was the most significant factor determining MP biofilm communities, followed by salinity and DO concentration. The principal plastisphere communities were Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes phyla. In-depth analyses of plastisphere communities revealed that biofilm-forming and plastic-degrading bacteria were the predominant microbes. In addition, potential pathogens were majorly discovered in the riverine waters with high organic content. Our results suggest that distinct plastisphere communities coexist with MP particles under certain riverine water conditions, implying that the varied MP biofilm communities may affect urban riverine ecology in a variety of ways.

Antibacterial and physical effects of cationic starch nanofibers containing carvacrol@casein nanoparticles against Bacillus cereus in soy products

Bacillus cereus (B. cereus) is a recognized foodborne pathogen widely distributed in various protein-rich foods, which is a huge challenge to food safety. Herein, a novel enzyme-responsive nanomaterial based on cationic starch (CSt) nanofibers loaded with carvacrol@casein nanoparticles (CL@CSNPs) was constructed (CL@CS/CSt nanofiber) to prevent the contamination of B. cereus in soybean products. Considering the excellent antibacterial activity of carvacrol (CL) against B. cereus, CL@CSNPs were prepared by electrostatic adsorption and hydrophobic interaction and characterized by SEM and FTIR.CL@CS/CSt nanofibers with better performance were determined by comparing the physical properties of the electrospinning solution and the prepared nanofiber. Nanofibers were prepared by electrospinning technology and analyzed by SEM and AFM to investigate the size and structural morphology of fibers. FTIR analyses were done to confirm the successful embedding of CL@CSNPs in CSt nanofibers. Subsequently, the controlled release of CL was verified by GC-MS and disc diffusion method. The application experiment results indicated that the treatment based on CL@CS/CSt nanofibers reduced the B. cereus in soy products by 2 log CFU/g, which reflected a significant antibacterial activity. In addition, CL@CS/CSt nanofibers could also prevent texture and chroma changes under refrigeration and maintain the sensory quality of soy products. Thus, CL@CS/CSt nanofibers appear to have great potential in controlling the contamination of soybean products by B. cereus while maintaining the physical quality.

Understanding of food biofilms by the application of omics techniques

Biofilms constitute a protective barrier for foodborne pathogens to survive under stressful food processing conditions. Therefore, studies into the development and control of biofilms by novel techniques are vital for the food industry. In recent years, foodomics techniques have been developed for biofilm studies, which contributed to a better understanding of biofilm behavior, physiology, composition, as well as their response to antibiofilm methods at different molecular levels including genes, RNA, proteins and metabolic metabolites. Throughout this review, the main studies where foodomics tools used to explore the mechanisms for biofilm formation, dispersal and elimination were reviewed. The data summarized from relevant studies are important to design novel and appropriate biofilm elimination methods for enhancing food safety at any point of food processing lines.