Oleogel-based Pickering emulsions stabilized by ovotransferrin–carboxymethyl chitosan nanoparticles for delivery of curcumin

Stability and in vitro digestion behavior of astaxanthin-loaded Pickering emulsions stabilized by OSA-modified starch: Influence of oil phase content

Astaxanthin, a lipid-soluble carotenoid, is widely recognized for its health-promoting properties. However, its use in functional foods is limited due to its low water solubility, chemical instability, and poor bioavailability. This study evaluated the potential of esterified starch-stabilized emulsions as astaxanthin carriers. The effects of the oil phase content on the emulsion properties, stability, and in vitro digestion behavior of the emulsions were investigated. All emulsions exhibited adequate encapsulation efficiency (>80 %) for astaxanthin. Moreover, the particle size and viscosity of the emulsions increased with an increasing oil phase content. The emulsion with a 10 % oil phase content (E-10 %) showed high retention of astaxanthin (>40 %) under the temperature, pH, and ionic strength conditions tested and long-term stability (42 days). On the other hand, the release of free fatty acids and bioaccessibility of astaxanthin were negatively correlated with the oil phase content. And the bioaccessibility of astaxanthin was increased to 11.66 % (for E-10 %). Under a constant emulsifier concentration, E-10 % and E-20 % exhibited a thicker interfacial layer at the oil/water interface. Based on this, a smaller particle size may favor oil droplet dispersion and inhibit droplet floatation and aggregation, improving emulsion stability. Therefore, this study provides useful information on the effect of the oil phase content in esterified starch-stabilized Pickering emulsion delivery systems.

Lipid-based nanodelivery systems of curcumin: Recent advances, approaches, and applications

Despite its many beneficial effects, pharmaceutical applications of curcumin (CUR) are limited due to its chemical instability, low solubility/absorption and weak bioavailability. Recent advances in nanotechnology have enabled the development of CUR-loaded nanodelivery systems to tackle those issues. Within many different nanocarriers developed for CUR up to date, lipid-based nanocarriers (LBNs) are among the most extensively studied systems. LBNs such as nanoemulsions, solid lipid carriers, nanostructured phospholipid/surfactant carriers are shown to be potential delivery systems capable of improving the solubility, bioavailability, and chemical stability of CUR. The particle characteristics, stability, bioavailability, and release properties of CUR-loaded LBNs can be tailored via optimizing the formulation and processing parameters. This paper reviews the most recent studies on the development of various CUR-loaded LBNs. Approaches to the improvement of CUR bioavailability and release characteristics of LBNs are discussed. Furthermore, challenges in the development of CUR-loaded LBNs and their potential applications are presented.

Recent advances in the development and application of curcumin-loaded micro/nanocarriers in food research

The application of curcumin in food science is challenged by its poor water solubility, easy degradation under processing and within the gastrointestinal tract, and poor bioavailability. Micro/nanocarrier is an emerging and efficient platform to overcome these drawbacks. This review focuses on the recent advances in the development and application of curcumin-loaded micro/nanocarriers in food research. The recent development advances of curcumin-loaded micro/nanocarriers could be classified into ten basic systems: emulsions, micelles, dendrimers, hydrogel polymeric particles, polymer nanofibers, polymer inclusion complexes, liposomes, solid lipid particles, structured lipid carriers, and extracellular vesicles. The application advances of curcumin-loaded micro/nanocarriers for food research could be classified into four types: coloring agents, functional active agents, preservation agents, and quality sensors. This review demonstrated that micro/nanocarriers were excellent carriers for the fat-soluble curcumin and the obtained curcumin-loaded micro/nanocarriers had promising application prospects in the field of food science.

Recent advances in nutraceutical delivery systems constructed by protein-polysaccharide complexes: A systematic review

Most nutraceuticals have low stability and solubility, making it difficult to achieve ideal bioavailability by directly incorporating into food. Therefore, constructing delivery systems to protect nutraceuticals is an essential strategy. Proteins and polysaccharides have become ideal materials for encapsulating nutraceuticals due to their superior nutritional value, edible safety, and physicochemical properties. This review first introduces the binding methods of protein-polysaccharide complexes and analyzes their respective merits, defects, and applications. Then, various protein-polysaccharide complex-based nutraceutical delivery systems are systematically summarized, including emulsions, gels, nanoparticles, microcapsules, complexes, and films, which can improve the stability, encapsulation efficiency, and bioaccessibility of nutraceuticals. In addition to traditional globular proteins mentioned in previous reviews, this review also introduces the advantages of another morphology of proteins (protein fibrils with linear structure) in the formation of protein-polysaccharide complexes and the construction of nutraceutical delivery systems. Next, the affecting factors are analyzed to achieve the precise control of protein-polysaccharide complex-based nutraceutical delivery systems. To improve public acceptability of protein-polysaccharide complex-based nutraceutical delivery systems, the safety and regulatory aspects are also discussed in detail. Moreover, the applications of such delivery systems are presented, including dietary supplements, food ingredients, food packaging, and food detection. Finally, several promising research directions that had not been provided before are innovatively proposed, including cell-cultured meat scaffolds, plant-based meat analogs, three-dimensional printing inks, and "three reductions" foods. Overall, this review provides guidance for designing protein-polysaccharide complex-based nutraceutical delivery systems with customized nutrition and superior bioavailability.

Bioactive compounds delivery and bioavailability in structured edible oils systems

The health benefits of bioactive compounds are dependent on the amount of intake as well as on the amount of these compounds that become bioavailable and bioaccessible. Various systems have been developed to deliver and increase the bioaccessibility of bioactive compounds. This review explores the impact of gelled (oleogels, bigels, emulgels, emulsions, hydrogels, and hydrogel beads), micro-(gels, particles, spheres, capsules, emulsions, and solid lipid microparticles) and nanoencapsulated systems (nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, liposomes, and nanoliposomes) on the digestibility and bioavailability of lipophilic and hydrophilic bioactives. Structurant molecules, the oil type, antioxidants, emulsifiers, and coatings in delivery systems with promising potential in food applications are critically discussed. The release and bio-accessibility of bioactive compounds in gelled systems are influenced by various factors, such as the type and concentration of gelators, the gelator-to-oil ratio, the type of antioxidant, the network of the system, and its hydrophobicity. The stability, bioaccessibility, and controlled release of bioactives were improved in structured emulsions. Several variables, including wall material, oil/water ratios, encapsulation process, and pH conditions, can affect the bioactives release in microencapsulated systems. Factors like coating type and core-to-wall ratio impact the stability and release of core components. The encapsulating material, the encapsulation technology, and the nature of the nanomaterials all have an impact on the bioaccessibility of nanoencapsulated systems. Nanoliposomes provide enhanced stability and absorption. In general, all encapsulated systems have shown great potential in improving the distribution and availability of bioactive compounds.

Gelation Dynamics steering Frontiers in Technology: Unraveling Hotspots and Research Trends through Scientometric insights

The serendipitous occurrence of gels in science has been a milestone for further industrial revolutionization. The controlled formation and disassembly of gels coupled with their viscoelastic properties and their ability to undergo extensive structural modification to suit different applications have led to the widespread use of gelation technology in different domains of science such as sensing, material chemistry and physics, medicine, food and nutrition, ecology, and more. With the rising interest in gelators and gels applications, accurately depicting the current status of gelation and associated technology is of paramount importance for researchers and scholars already immersed in gel technology as well as those aiming to delve into this field. Utilizing bibliometrics offers a systematic approach to analyze trends, citation patterns, and the impact of research, providing crucial insights for advancing knowledge and innovation in gel technology. By performing a comprehensive bibliometric analysis of scientific publications, using Vosviewer, Citespace, and Biblioshiny, in terms of co-authorship and co-citations of publications, and also the co-occurrence analysis of countries, institutions, authors, and keywords Research frontiers and hotspots in gelation and associated technologies in 21st century can be assessed. The result indicated a research frontier in the discipline of ecology, earth, and marine for gelator application and current hotspots within the research field of gelation technology in; catalysis, eutectogels development as an alternative for ionic liquid gels, gelators in drug delivery for antibacterial activity, oleogels in the food industry, low molecular weight hydrogels for tissue repair and 4D printing and gelators application for oil spill remediation and dye removal. This work, although not assessing fully the qualitative aspect of a research field, gives a broad quantitative analysis and direction of research within a research field. The result of this work will provide a comprehensive overview of the evolution of research in the field of gelation technology and a global understanding of research frontiers, hotspots, and drawbacks within the field to researchers and scholars willing to work in this research area.

Emulsifying properties of egg proteins: Influencing factors, modification techniques, and applications

As an essential food ingredient with good nutritional and functional properties and health benefits, eggs are widely utilized in food formulations. In particular, egg proteins have good emulsification properties and can be commonly used in various food products, such as mayonnaise and baked goods. Egg protein particles can act as stabilizers for Pickering emulsions because they can effectively adsorb at the oil-water interface, reduce interfacial tension, and form a stable physical barrier. Due to their emulsifying properties, biocompatibility, controlled release capabilities, and ability to protect bioactive substances, egg proteins have become ideal carriers for encapsulating and delivering functional substances. The focus of this review is to summarize current advances in using egg proteins as emulsifiers. The effects of influencing factors (temperature, pH, and ionic strength) and various modification methods (physical, chemical, and biological modification) on the emulsifying properties of egg proteins are discussed. In addition, the application of egg proteins as emulsifiers in food products is presented. Through in-depth research on the emulsifying properties of egg proteins, the optimization of their applications in food, biomedical, and other fields can be achieved.

Ovotransferrin, an alternative and potential protein for diverse food and nutritional applications

Ovotransferrin(OVT)is a protein found in many types of egg white and has a wide range of functional properties. It has 50% homology with human/bovine lactoferrin, and is expected to be one of the most important alternative proteins for use in food and nutritional applications. This paper mainly reviews the structural characteristics and chemical properties of OVT, as well as its extraction and purification methods. It also systematically describes the various biological activities of OVT and its applications in food and medical industries. The challenges and limitations in the research of OVT were suggested. This review recommends some possible methods such as nanoparticle carriers and microencapsulation to improve the bioavailability and stability of OVT. In addition, this review highlights several strategies to overcome the limitations of OVT in terms of preparation and purification. This review systematically summarizes the recent advances in OVT and will provide guidance for the its development for food and nutritional applications.

Novel organic-inorganic composite pea protein silica food-grade aerogel materials: Fabrication, mechanisms, high oil-holding property and curcumin delivery capacity

The fragility of the skeleton and poor bioaccessibility limit Silica aerogel's application in the food industry. In this study, composite gels were obtained by cross-linking pea proteins isolate (PPI) with Tetraethoxysilane (TEOS)to improve the bioavailability of silica-derived aerogels. It indicated that TEOS first condensed with H+ to form secondary particles and then complexed with PPI via hydroxyl groups to form a composite aerogel. Meanwhile, the PPI-Si composite aerogel formed a dense mesoporous structure with a specific surface area of 312.5 g/cm3. This resulted in a higher oil holding percentage of 89.67 % for the PPI (10 %)-Si aerogel, which was 34.1 % higher than other studies, leading to a more stable oleogel. Finally, as a delivery system, the composite oleogel not only could significantly increase the bioaccessibility rate by 27.4 % compared with silica aerogel, but also could efficiently inhibit the premature release of curcumin in the simulated gastric fluids, while allowed sustainably release in the simulated intestinal fluids. These results provided a theoretical basis for the application of silica-derived aerogels in food and non-food applications.

Storage stability and degradation mechanism of xanthohumol in Humulus lupulus L. and beer

Xanthohumol (XN), possessing potent physiological activity, is exclusively derived from hops (Humulus lupulus L.) and exhibits high instability. However, its inherent instability often results in degradation during storage, leading to a decline in its activity due to the formation of various products. This study aimed to explore the stability of XN in beer under different storage conditions, establish or clarify degradation kinetic models, and understand the degradation mechanism. Our findings revealed that XN would degrade rapidly when exposed to high temperature and light. Its degradation followed a first-order kinetic model, involving reactions such as isomerization, hydration and ortho-position cyclization, resulting in the formation of five products. These insights shed light on the factors and mechanisms underlying the instability and degradability of XN, serving as a foundation for the development of a stable beer product enriched with functional XN.

Influence of varying oil phase volume fractions on the characteristics of flaxseed-derived diglyceride-based Pickering emulsions stabilized by modified soy protein isolate

This research aimed to create Pickering emulsions using modified soy protein isolate (SPI) as a stabilizer and flaxseed-derived diglyceride (DAG) as an oil phase. The SPI was modified through a process involving both heating and ultrasound treatment. The result indicated that the droplet size of emulsions increased with the increase in oil content (p < 0.05). For instance, the largest droplet size (23 µm) was observed at an oil-to-SPI dispersion ratio of 4:1 ratio (φ = 80), whereas the smallest droplet size (6.39 µm) was noticed at the 1:4 ratio. During the 7-day storage period, the emulsions with a 4:1 ratio (φ = 80) showed the lowest droplet size increase (from 23 µm to 25.58 µm). In contrast, the emulsions with a 1:1 ratio displayed the highest increase (from 19.39 µm to 74.29 µm). Creaming index results revealed that emulsions with a 4:1 ratio (φ = 80) showed no signs of creaming and phase separation than all other treatments (p < 0.05). Backscattering fluctuations (ΔBS) and turbiscan stability index (TSI) showed that emulsions with 4:1, 2:1, and 1:1 oil-to-SPI dispersion ratios had consistent ΔBS curves with higher and TSI curves with lower values. Optical microscopy, confocal laser scanning, and cryo-scanning electron microscopy revealed that emulsions with oil-to-SPI dispersion ratios of 4:1 and 2:1 had well-organized structures with no visible coalescence. Macromorphological and microrheological investigations demonstrated that emulsions with 80% oil content had the highest viscosity, both moduli, elasticity index, macroscopic viscosity index, and the lowest fluidity index and solid-liquid balance values. Moreover, these emulsions were more resistant to centrifugation and storage environments. In conclusion, the study determined that flaxseed-derived DAG-based high internal phase Pickering emulsions (φ = 80) had superior stability, improved viscoelasticity, and better rheological properties.

Molecular simulation for food protein-ligand interactions: A comprehensive review on principles, current applications, and emerging trends

In recent years, investigations on molecular interaction mechanisms between food proteins and ligands have attracted much interest. The interaction mechanisms can supply much useful information for many fields in the food industry, including nutrient delivery, food processing, auxiliary detection, and others. Molecular simulation has offered extraordinary insights into the interaction mechanisms. It can reflect binding conformation, interaction forces, binding affinity, key residues, and other information that physicochemical experiments cannot reveal in a fast and detailed manner. The simulation results have proven to be consistent with the results of physicochemical experiments. Molecular simulation holds great potential for future applications in the field of food protein-ligand interactions. This review elaborates on the principles of molecular docking and molecular dynamics simulation. Besides, their applications in food protein-ligand interactions are summarized. Furthermore, challenges, perspectives, and trends in molecular simulation of food protein-ligand interactions are proposed. Based on the results of molecular simulation, the mechanisms of interfacial behavior, enzyme-substrate binding, and structural changes during food processing can be reflected, and strategies for hazardous substance detection and food flavor adjustment can be generated. Moreover, molecular simulation can accelerate food development and reduce animal experiments. However, there are still several challenges to applying molecular simulation to food protein-ligand interaction research. The future trends will be a combination of international cooperation and data sharing, quantum mechanics/molecular mechanics, advanced computational techniques, and machine learning, which contribute to promoting food protein-ligand interaction simulation. Overall, the use of molecular simulation to study food protein-ligand interactions has a promising prospect.

Research progress on chitin/chitosan-based emulsion delivery systems and their application in lipid digestion regulation

Excessive lipid intake is linked to an elevated risk of health problems. However, reducing lipid contents may influence food structure and flavor. Some alternatives are needed to control the lipid absorption. Emulsions are common carriers for lipids, which can control the hydrolysis and absorption of lipids. Chitin (Ch) and chitosan (CS) are natural polysaccharides with good biodegradability, biocompatibility, and unique cationic properties. They have been reported to be able to delay lipolysis, which can be regarded as one of the most promising agents that regulates lipid digestion (LiD). The application of Ch/CS and their derivatives in emulsions are summarized in this review with a focus on their performances and mechanisms for LiD regulation, aiming to provide theoretical guidance for the development of novel Ch/CS emulsions, and the regulation of LiD. A reasonable design of emulsion interface can provide its resistance to the external environment and then control LiD. The properties of emulsion interface are the key factors affecting LiD. Therefore, systematic study on the relationship between Ch/CS-based emulsion structure and LiD can not only instruct the reasonable design of emulsion interface to accurately regulate LiD, but also provide scientific guidelines for applying Ch/CS in functional food, medicine and other fields.

Preparation of core-shell hordein/pectin nanoparticles as quercetin delivery matrices: Physicochemical properties and colon-specific release analyses

Quercetin (Que) is a hydrophobic flavanol that has the potential to prevent colon diseases. This study aimed to design hordein/pectin nanoparticle as a colon-specific delivery system for quercetin. The encapsulation efficiency, physicochemical stability and release properties of the nanoparticles were estimated. The FTIR and secondary structure analysis indicated that hydrogen bonds, hydrophobic interactions and electrostatic attractions were formed in the quercetin-loaded hordein/pectin nanoparticles (Que-hordein/pectin NPs). In comparison to Que-hordein NPs, Que-hordein/pectin NPs exhibited better colloidal stability (physical, UV light, heating and salt). Furthermore, the release properties studies showed that pectin coating restrained the premature release of Que from hordein NPs in gastric fluid and intestinal fluid. In-vitro release, when the Que-hordein/pectin NPs were exposed to simulated colonic fluid (SCF) for 6 h, quercetin was greatly released from the hordein/pectin NPs (15.29 ± 1.17% - 80.60 ± 1.78%). In-vivo release, the concentration of Que (μg/g) in Que-hordein/pectin NPs was 2.18 times higher than Que-hordein NPs in colon tissue after 6 h of oral administration. This study suggests that Que-hordein/pectin NPs have promising applications in the specific delivery and release of quercetin to the colon.

Soy protein isolate-citrus pectin-gallic acid ternary composite high internal phase Pickering emulsion for delivery of β-carotene: Physicochemical, structural and digestive properties

The structure properties, stability and β-carotene slow-release mechanism of soybean protein isolate-citrus pectin-gallic acid complex (SPI-CP-GA) stabilized high-internal phase Pickering emulsion (HIPPE) were investigated. The results showed that compared with the SPI-CP binary complex, the turbidity of the SPI-CP-GA ternary complex increased from 2.174 ± 0.001 to 3.027 ± 0.001, the surface wettability was increased, the infrared peaks was blue-shifted, changed from hydrophilic to hydrophobic, and the equilibrium interfacial tension of particles increased from 10.77 ± 0.02 mN/m to 13.46 ± 0.03 mN/m, the complex was more stable. When the GA was 2.0 mg/mL, the encapsulation efficiency of β-carotene was higher. With increased GA concentration and oil phase volume fraction (φ), the apparent viscosity and viscoelastic behavior of HIPPE performed well, forming a stable gel network structure. After 30 days of storage, there was no oil separation in the sample group with GA concentration of 2.0 mg/mL and φ = 0.7, and the stability was strong. After gastrointestinal digestion, the particle size of the HIPPE decreased from 13.51 ± 0.86 μm to 7.70 ± 0.68 μm, the free fatty acid (FFA) release rate was 22.03%, and the bioaccessibility of β-carotene was 6.67 ± 0.19%, and the sustained-release effect was obvious. These results indicated that the SPI-CP-GA ternary complex is a potential stabilizer for HIPPE, and providing theoretical guidance for the design of protein-polysaccharide-polyphenol stabilized HIPPE.

Pickering emulsions stabilized by zein-gallic acid composite nanoparticles: Impact of covalent or non-covalent interactions on storage stability, lipid oxidation and digestibility

Studies have shown that covalent and non-covalent zein-polyphenol complexes exhibit significant differences in structure and properties, but their effects on the characteristics of Pickering emulsions are still unclear. In this study, zein nanoparticles (ZNPs), non-covalent (N-ZGANPs) and covalent (C-ZGANPs) zein-gallic acid nanoparticles were fabricated to investigate the influence of complexation types on the properties of an algal oil-in-water Pickering emulsion. Results indicated that the addition of gallic acid was associated with the decrease of interfacial tension of particles. C-ZGANPs possessed the strongest interfacial adsorption capacity, which contributed to the optimum physical stability of the covalent emulsion during storage. The rheological experiment demonstrated that C-ZGANPs decreased the viscoelasticity of the emulsion, while N-ZGANPs showed the opposite effect. Moreover, the emulsions stabilized by C-ZGANPs significantly delayed the oxidation of the encapsulated algal oil, protected astaxanthin (AST) from heat, as well as increased the bioaccessibility of AST in simulated digestion.

The oxidative quality of bi-, oleo- and emulgels and their bioactives molecules delivery

During recent years, the applicability of bi-, oleo- and emulgels has been widely studied, proving several advantages as compared to conventional fats, such as increasing the unsaturated fat content of products and being more sustainable for temperate regions as compared to tropical fats. Moreover, these alternative fat systems improve the nutritional profile, increase the bioavailability of bioactive compounds, and can be used as preservation films and markers for the inactivation of pathogens, while in 3D printing facilitate the obtaining of superior food products. Furthermore, bi-, oleo- and emulgels offer food industries efficient, innovative, and sustainable alternatives to animal fats, shortenings, margarine, palm and coconut oil due to the nutritional improvements. According to recent studies, gels can be used as ingredients for the total or partial replacement of saturated and trans fats in the meat, bakery and pastry industry. The evaluation of the oxidative quality of this gelled systems is significant because the production process involves the use of heat treatments and continuous stirring where large amounts of air can be incorporated. The aim of this literature review is to provide a synthesis of studies to better understand the interaction of components and to identify future improvements that can be applied in oil gelling technology. Generally, higher temperatures used in obtaining polymeric gels, lead to more oxidation compounds, while a higher concentration of structuring agents leads to a better protection against oxidation. Due to the gel network ability to function as a barrier against oxidation factors, gelled matrices are able to provide superior protection for the bioactive compounds. The release percentage of bioactive molecules can be regulated by formulating the gel matrix (type and concentration of structuring agents and type of oil). In terms of food products, future research may include the use of antioxidants to improve the oxidative stability of the reformulated products.

Preparation and characterization of curcumin/chitosan conjugate as an efficient photodynamic antibacterial agent

Curcumin (Cur) is a natural pigment with excellent biological activity. The poor stability and insolubility of Cur in water severely limit its application. Therefore, to overcome these dilemmas which are big hindrances in their application, a novel derivative (COCS-Cur) was prepared by the esterification reaction of carboxylated chitosan (COCS) and Cur. The structure and properties of conjugate were determined through a series of characterizations. The derivatives had excellent solubility as well as stability. In addition, antioxidant and photodynamic antibacterial experiments proved that COCS-Cur had the excellent free radical scavenging ability and photodynamic antibacterial activity. The derivatives presented a better antibacterial effect on Staphylococcus aureus (S. aureus) than Escherichia coli (E. coli). Noteworthy, the COCS-Cur derivatives showed no obvious toxicity which makes them a stronger contender and potential antimicrobial agent or functional nutrient for application in the food industry.

Pickering emulsions stabilized by homogenized ball-milled eggshell particles in combination with sodium alginate

Eggshells, by-products of egg processing, were ball-milled and homogenized into particles (eggshell particles, ESPs) and then were used as the stabilizer with a two-step oil addition method to produce Pickering emulsions. Meanwhile, sodium alginate (SA) was used to modify the emulsifying ability of ESPs. The results indicated that SA addition helped to improve the dispersion performance and increase the negative charge of ESPs. Pickering emulsions stabilized by ESPs/SA showed much smaller particle size than those stabilized by ESPs. The maximum oil fraction in the ESPs/SA-stabilized emulsions reached up to 0.8, while that was only 0.75 in ESPs-stabilized emulsions. The presence of SA significantly enhanced the freeze-thaw, thermal, dilution, and centrifuge stability of ESPs-stabilized Pickering emulsions. The findings demonstrate the potential of eggshell particles as a kind of natural Pickering stabilizer, which will increase the high value-added utilization of poultry egg industry by-products.

Oral Cell-Targeted Delivery Systems Constructed of Edible Materials: Advantages and Challenges

Cell-targeted delivery is an advanced strategy which can effectively solve health problems. However, the presence of synthetic materials in delivery systems may trigger side effects. Therefore, it is necessary to develop cell-targeted delivery systems with excellent biosafety. Edible materials not only exhibit biosafety, but also can be used to construct cell-targeted delivery systems such as ligands, carriers, and nutraceuticals. Moreover, oral administration is the appropriate route for cell-targeted delivery systems constructed of edible materials (CDSEMs), which is the same as the pattern of food intake, resulting in good patient compliance. In this review, relevant studies of oral CDSEMs are collected to summarize the construction method, action mechanism, and health impact. The gastrointestinal stability of delivery systems can be improved by anti-digestible materials. The design of the surface structure, shape, and size of carrier is beneficial to overcoming the mucosal barrier. Additionally, some edible materials show dual functions of a ligand and carrier, which is conductive to simplifying the design of CDSEMs. This review can provide a better understanding and prospect for oral CDSEMs and promote their application in the health field.

Edible oleogels based on high molecular weight oleogelators and its prospects in food applications

Food industry is actively looking for alternative ingredients to replace saturated and trans fats in foods while preserving their original organoleptic attributes to ensure consumers' acceptance. A plausible approach is the replacement of solid fats with oleogels. Oleogels can be engineered to mimic properties that are commonly played by regular solid fats but using hydrophobic liquid vegetable oil with an optimum fatty acid profile and, they can also act as carriers for lipophilic bioactive substance. Low molecular weight oleogelators (LMOGs) are well studied and reviewed. In contrast, high molecular weight oleogelators (HMOGs) e.g., polysaccharides and proteins, are not fully researched yet. This review focusses on development of HMOG oleogels produced by means of emulsion templated, direct dispersion, foam templated and solvent exchange methods that can influence the stability, physicochemical properties and their potential application in food industry. Multi-component oleogels can solve the inefficiencies in a single component oleogel and, thus, combinations of HMOGs and HMOGs & LMOGs can produce oleogels with desired properties. These new oleogels can find application as fat substitutes in food products, providing better nutritional and sensory acceptance. A comprehensive overview of recent developments in the field of HMOG and multicomponent oleogels with HMOG is deeply reviewed.

Fabrication of chitosan-protocatechuic acid conjugates to inhibit lipid oxidation and improve the stability of β-carotene in Pickering emulsions: Effect of molecular weight of chitosan

In this study, chitosan (CS) with different molecular weights was functionalized with protocatechuic acid (PA) by free-radical grafting reaction, and used for the inhibition of lipid oxidation and the enhancement of stability of β-carotene in Pickering emulsions. The order of grafting ratio of PA in CS-PA conjugates was CS400 (400 kDa CS) > CS200 (200 kDa CS) > CS100 (100 kDa CS). UV-vis, FT-IR and ¹H NMR spectra proved that PA was covalently bonded to CS through amino and ester linkages. Compared with native CS, three CS-PA conjugates exhibited reduced crystallinity and thermal stability and improved antioxidant activity, with a molecular weight-dependent relationship. Besides, CS-PA-conjugate particles formed by ionic gelling procedure were spherically shaped and homogeneously dispersed, which substantially improved the stability of β-carotene in Pickering emulsions than CS particles under ultraviolet irradiation, natural light exposure and heat treatment, and the retention rates of β-carotene were in the following order: CS200-PA- > CS400-PA- > CS100-PA-conjugate particles. Furthermore, the oxidation stability of Pickering emulsions fabricated by CS-PA-conjugate particles was also higher than that of CS particles. These results will provide valuable information for the application of CS-PA conjugates to protect bioactive components and inhibit lipid oxidation in emulsion systems.

Fibrous and Spherical Aggregates of Ovotransferrin as Stabilizers for Oleogel-Based Pickering Emulsions: Preparation, Characteristics and Curcumin Delivery

This study aimed to explore the effects and mechanisms of differently shaped aggregates of ovotransferrin (OVT) particles on oleogel-based Pickering emulsions (OPEs). Medium-chain triglyceride oil-based oleogels were constructed using beeswax, and their gel-sol melting temperatures were investigated. Atomic force microscopy confirmed that both OVT fibrils and OVT spheres were successfully prepared, and the three-phase contact angle measurements indicated that fibrous and spherical aggregates of OVT particles possessed great potential to stabilize the OPEs. Afterward, the oil-in-water OPEs were fabricated using oleogel as the oil phase and OVT fibrils/spheres as the emulsifiers. The results revealed that OPEs stabilized with OVT fibrils (FIB-OPEs) presented a higher degree of emulsification, smaller droplet size, better physical stability and stronger apparent viscosity compared with OPEs stabilized with OVT spheres (SPH-OPEs). The freeze–thaw stability test showed that the FIB-OPEs remained stable after three freeze–thaw cycles, while the SPH-OPEs could barely withstand one freeze–thaw cycle. An in vitro digestion study suggested that OVT fibrils conferred distinctly higher lipolysis (46.0%) and bioaccessibility (62.8%) of curcumin to OPEs.

Egg white protein-based delivery system for bioactive substances: a review

Some bioactive substances in food have problems such as poor solubility, unstable chemical properties and low bioavailability, which limits their application in functional food. Recently, many egg white protein-based delivery carriers have been developed to improve the chemical stability, biological activity and bioavailability of bioactive substances. This article reviewed the structure and properties of several major egg white proteins commonly used to construct bioactive substance delivery systems. Several common carrier types based on egg white proteins, including hydrogels, emulsions, micro/nanoparticles, aerogels and electrospinning were then introduced. The biological functions of common bioactive substances, the limitations, and the role of egg white protein-based delivery systems were also discussed. At present, whole egg white protein, ovalbumin and lysozyme are most widely used in delivery systems, while ovotransferrin, ovomucoid and ovomucin are less developed and applied. Egg white protein-based nanoparticles are currently the most commonly used delivery carriers. Egg white protein-based hydrogels, emulsions, and microparticles are also widely used. Future research on the application of various egg white proteins in developed new delivery systems will provide more choices for the delivery of various bioactive substances.

Effect of Fibril Entanglement on Pickering Emulsions Stabilized by Whey Protein Fibrils for Nobiletin Delivery

The aim of the study was to investigate the effects of whey protein isolate (WPI) fibrils entanglement on the stability and loading capacity of WPI fibrils-stabilized Pickering emulsion. The results of rheology and small-angle X-ray scattering (SAXS) showed the overlap concentration (C*) of WPI fibrils was around 0.5 wt.%. When the concentration was higher than C*, the fibrils became compact and entangled in solution due to a small cross-sectional radius of gyration value (1.18 nm). The interfacial behavior was evaluated by interfacial adsorption and confocal laser scanning microscopy (CLSM). As the fibril concentration increased from 0.1 wt.% to 1.25 wt.%, faster adsorption kinetics (from 0.13 to 0.21) and lower interfacial tension (from 11.85 mN/m to 10.34 mN/m) were achieved. CLSM results showed that WPI fibrils can effectively absorb on the surface of oil droplets. Finally, the microstructure and in vitro lipolysis were used to evaluate the effect of fibrils entanglement on the stability of emulsion and bioaccessibility of nobiletin. At C* concentration, WPI fibrils-stabilized Pickering emulsions exhibited excellent long-term stability and were also stable at various pHs (2.0–7.0) and ionic strengths (0–200 mM). WPI fibrils-stabilized Pickering emulsions after loading nobiletin remained stable, and in vitro digestion showed that these Pickering emulsions could significantly improve the extent of lipolysis (from 36% to 49%) and nobiletin bioaccessibility (21.9% to 62.5%). This study could provide new insight into the fabrication of food-grade Pickering emulsion with good nutraceutical protection.

Effect of Melissa officinalis L. Essential Oil Nanoemulsions on Structure and Properties of Carboxymethyl Chitosan/Locust Bean Gum Composite Films

This study aimed to develop active films based on carboxymethyl chitosan (CMCS)/locust bean gum (LBG) films containing Melissa officinalis L. essential oil (MOEO) nanoemulsions. The results showed that the active films incorporated with MOEO nanoemulsion resulted in an increase in the elongation of break, water resistance and improved the film hydrophilicity. Elongation of break increased from 18.49% to 27.97% with the addition of 4% MOEO nanoemulsion. Water resistance was decreased from 56.32% to 25.43%, and water contact angle was increased from 75.13 to 83.86 with the addition of 4% MOEO nanoemulsion. However, the water vapor barrier properties and tensile strength decreased with the addition of MOEO nanoemulsions. The scanning electron microscopic images and Fourier transform infrared spectroscopy results showed that the MOEO was very compatible with the film materials and dispersed evenly in the films. At the same time, the addition of MOEO nanoemulsion significantly enhanced antioxidant and antibacterial activities of C/L-MOEO films. The antioxidant and antimicrobial activities of C/L-MOEO films were increased from 7.16% to 33.81% and 3.52% to 54.50%, respectively. In general, C/L-MOEO film has great application prospects.