Bioremediation of petroleum hydrocarbons in anoxic marine sediments: consequences on the speciation of heavy metals

Marine coastal chemistry related to inland inputs in San Jorge gulf and the adjacent north coast

Coastal regions are sectors where human activities impact the marine ecosystem, and if necessary control measures are not taken, they can generate negative consequences for health and ecosystem services. Within the framework of the Pampa Azul initiative and under the One Health paradigm, the interconnection between the terrestrial and marine environments of the San Jorge Gulf and the adjacent north coast has been studied. In November, 2022, a campaign was carried out aboard the R/V "Mar Argentino" at thirty-four stations near the coast. There, for the first time, simultaneously with in-situ measurements of physical variables, macronutrients (NO3-, PO4-3, Si(OH)4 and NH4+), particulate silica (BSi and LSi), trace metals in the particulate material (Cd, Cu, Cr, Fe and Pb) and the phytoplankton community were analyzed. The results showed a high nutrient dynamic, with a significant influence of natural stratification and anthropogenic condition due to the discharge of effluents off the cities of Comodoro Rivadavia and Caleta Olivia. Under natural conditions, NO3- and Si(OH)4 limited the surface primary production by 47 % and 41 %, respectively. Additionally, due to the anthropogenic contribution, NH4+ concentration reached 3 μM, increasing the proliferation of nanophytoplankton, among other consequences. As a result of nutrient dynamics, the uptake of Si(OH)4, the growth rate of diatoms and their production of BSi were decoupled. Furthermore, a significant correlation between LSi and Fe in particulate matter was evidenced, opening new lines of research that relate dust storms to primary productivity in this marine environment. The measured concentrations of trace metals do not appear to be a biological risk; however, contamination by Cd (37.6 μg g- 1 d.w.) and Cu (214.97 μg g- 1 d.w.) off Camarones poses a significant concern that must be addressed in the immediate future.

Petroleum pollution affects soil chemistry and reshapes the diversity and networks of microbial communities

Soil is the bearing centre of terrestrial ecosystems. Oil pollution leads to changes in the physical and chemical properties of soil to varying degrees. Polluted soils form a unique microbial species composition, which provides rich materials for the bioremediation of oil-contaminated soil through biological enhancement. Understanding the microbial composition of petroleum-contaminated soil can provide a better biological method for soil remediation. Based on this, 16 S rRNA and ITS genetic markers were used to analyse the bacterial and fungal microbiota in petroleum-contaminated soil, and their physical and chemical properties (total organic carbon, alkaline hydrolysable nitrogen, total phosphorus, total potassium, available potassium, Cu, Zn, and Cd) were measured. It was found that petroleum pollution can significantly reduce the abundance and diversity of bacteria and fungi in the soil and significantly promote the relative abundance of Proteobacteria, Pseudomonas, Pseudoxanthomonas and Pseudoallescheria, which changed the dominant flora of bacteria and fungi and reshaped the co-occurrence network relationship between bacteria and fungi in oil-contaminated soil. The content of total organic carbon in petroleum-contaminated soil was significantly higher than that in uncontaminated soil, while the content of alkaline hydrolysable nitrogen and available potassium was significantly lower than that in uncontaminated soil, and the content of Cu significantly increased after pollution. Total organic carbon is the key driving factor that changes oil-contaminated soil microorganisms and plays a significant role in regulating the remodelling and composition of the microbial community in oil-contaminated soil. This study laid a solid theoretical foundation for the bioremediation of oil-contaminated soil.

Factors Influencing the Bacterial Bioremediation of Hydrocarbon Contaminants in the Soil: Mechanisms and Impacts

The discharge of hydrocarbons and their derivatives to environments due to human and/or natural activities cause environmental pollution (soil, water, and air) and affect the natural functioning of an ecosystem. To minimize or eradicate environmental pollution by hydrocarbon contaminants, studies showed strategies including physical, chemical, and biological approaches. Among those strategies, the use of biological techniques (especially bacterial biodegradation) is critically important to remove hydrocarbon contaminants. The current review discusses the insights of major factors that enhance or hinder the bacterial bioremediation of hydrocarbon contaminants (aliphatic, aromatic, and polyaromatic hydrocarbons) in the soil. The key factors limiting the overall hydrocarbon biodegradation are generally categorized as biotic factors and abiotic factors. Among various environmental factors, temperature range from 30 to 40°C, pH range from 5 to 8, moisture availability range from 30 to 90%, carbon/nitrogen/phosphorous (C/N/P; 100:20:1) ratio, and 10–40% of oxygen for aerobic degradation are the key factors that show positive correlation for greatest hydrocarbon biodegradation rate by altering the activities of the microbial and degradative enzymes in soil. In addition, the formation of biofilm and production of biosurfactants in hydrocarbon-polluted soil environments increase microbial adaptation to low bioavailability of hydrophobic compounds, and genes that encode for hydrocarbon degradative enzymes are critical for the potential of microbes to bioremediate soils contaminated with hydrocarbon pollutants. Therefore, this review works on the identification of factors for effective hydrocarbon biodegradation, understanding, and optimization of those factors that are essential and critical.

Combining sediment management and bioremediation in muddy ports and harbours: A review

This paper reviews two important sources of innovation linked to the maritime environment and more importantly to ports: the potential coupling of sediment management and (bio)remediation. The detrimental effects of dredging are briefly considered, but the focus here is on a sustainable alternative method of managing the problem of siltation. This technique consists of fluidizing the sediment in situ, lowering the shear strength to maintain a navigable under-keel draught. Preliminary investigations show that through this mixing, aeration occurs, which results in a positive remediation effect as well. An overview of port contamination, remediation, and the recent research on aerobic (bio)degradation of port contaminants is made in order to show the potential for such innovative sediment management to reduce dredging need and remediate contaminated mud in ports. This review also highlights the lack of full-scale field applications for such potential remediation techniques, that remain largely confined to the laboratory scale.

Insights into the vertical distribution of the microbiota in steel plant soils with potentially toxic elements and PAHs contamination after 60 years operation: Abundance, structure, co-occurrence network and functionality

Both potentially toxic elements (PTEs) and polycyclic aromatic hydrocarbons (PAHs) are widely present in soil contaminated by steel industries. This study assessed the vertical variation (at 20 cm, 40 cm, 60 cm, 80 cm, 120 cm, and 150 cm depth) of bacterial abundance, community structure, functional genes related to PAHs degradation, and community co-occurrence patterns in an old steel plant soils which contaminated by PTEs and PAHs for 60 years. The excessive PAHs and PTEs in steel plant soils were benzo (a) pyrene, benzo (b) fluoranthene, dibenzo (a, h) anthracene, indeno (1,2,3-c, d) pyrene, and lead (Pb). The abundance and composition of bacterial community considerably changed with soil depth in two study areas with different pollution degrees. The results of co-occurrence network analysis indicated that the top genera in blast furnace zone identified as the potential keystone taxa were Haliangium, Blastococcus, Nitrospira, and Sulfurifustis. And in coking zone, the top genera were Gaiella. The predictions of bacterial metabolism function using PICRUSt showed that the PAHs-PTEs contaminated soil still had the potential for PAHs degradation, but most PTEs negatively correlated with PAHs degradation genes. The total sulfur (TS), acenaphthene (ANA), and Zinc (Zn) were the key factors to drive development of bacterial communities in the steel plant soils. As far as we know, this is the first investigation of vertical distribution and interaction of the bacterial microbiota in the aging soils of steel plant contaminated with PTEs and PAHs.

Bacteria, Fungi and Microalgae for the Bioremediation of Marine Sediments Contaminated by Petroleum Hydrocarbons in the Omics Era

Petroleum hydrocarbons (PHCs) are one of the most widespread and heterogeneous organic contaminants affecting marine ecosystems. The contamination of marine sediments or coastal areas by PHCs represents a major threat for the ecosystem and human health, calling for urgent, effective, and sustainable remediation solutions. Aside from some physical and chemical treatments that have been established over the years for marine sediment reclamation, bioremediation approaches based on the use of microorganisms are gaining increasing attention for their eco-compatibility, and lower costs. In this work, we review current knowledge concerning the bioremediation of PHCs in marine systems, presenting a synthesis of the most effective microbial taxa (i.e., bacteria, fungi, and microalgae) identified so far for hydrocarbon removal. We also discuss the challenges offered by innovative molecular approaches for the design of effective reclamation strategies based on these three microbial components of marine sediments contaminated by hydrocarbons.

Assessing the efficiency and eco-sustainability of bioremediation strategies for the reclamation of highly contaminated marine sediments

Coastal sediments subjected to high anthropogenic impacts can accumulate large amounts of polycyclic aromatic hydrocarbons (PAHs) and metals, demanding effective and eco-sustainable remediation solutions. In this study, we carried out bioremediation experiments on marine sediments highly contaminated with PAHs and metals. In particular, we investigated the effects of biostimulation (by the addition of inorganic nutrients), bioaugmentation (by the addition of fungi belonging to Aspergillus sp.) and microbial fuel cell-based strategies on PAH degradation and on changes in metal partitioning. Results reported here indicate that all biotreatments determined a significant decrease of PAH concentrations (at least 60%) in a relatively short time interval (few weeks) and that biostimulation was the most effective approach (>90%). Biostimulation determined a faster degradation rate of high than low molecular weight PAHs, indicating a preferential biodegradation of specific PAH congeners. At the same time, the biotreatments changed the partitioning of metals, including their solubilization, suggesting the need of parallel environmental risk assessment. Our findings also suggest that ex situ biotreatments can have a lower carbon footprint than current management options of contaminated sediments (i.e., landfill disposal and/or disposal in confined aquatic facilities), but integration with other strategies for metal removal (e.g. through bioleaching) from sediments is needed for their safe re-use. Overall, results presented here provide new insights into the development of effective and eco-sustainable bioremediation strategies for the reclamation of highly contaminated marine sediments.

The interaction between dispersed crude oil droplets and particulate matter

In this study, the effect of particulate matter type, temperature, oil type and weathering degree on the interaction between dispersed crude oil droplets and particulate matter was investigated. The increase of total petroleum hydrocarbon (TPH) percentage in oil-particle aggregates (OPAs) could be attributed to the increase of oil polarity or viscosity. For small size particulate matter, there was a fine dependence relationship between the TPH percentage in OPAs and the oil viscosity and the content of polar components, respectively (R2 > 0.7502). And the total organic carbon content also played an important role in the formation of OPAs. The petroleum hydrocarbon extracts of OPAs showed a decrease in short-carbon-chain components and a relative increase in long-carbon-chain compounds. Petroleum hydrocarbon compounds trapped by three types of particulate matter exhibited a similar change tendency, but there was no apparent difference in the residual TPH percentage in water.

Biostimulation of in situ microbial degradation processes in organically-enriched sediments mitigates the impact of aquaculture

Fish farm deposition, resulting in organic matter accumulation on bottom sediments, has been identified as among the main phenomena causing negative environmental impacts in aquaculture. An in situ bioremediation treatment was carried out in order to reduce the organic matter accumulation in the fish farm sediments by promoting the natural microbial biodegradation processes. To assess the effect of the treatment, the concentration of organic matter in the sediment and its microbial degradation, as well as the response of the benthic prokaryotic community, were investigated. The results showed a significant effect of the treatment in stimulating microbial degradation rates, and the consequent decrease in the concentration of biochemical components beneath the cages during the treatment. During the bioremediation process, the prokaryotic community in the fish farm sediment responded to the overall improvement of the sediment conditions by showing the decrease of certain anaerobic taxa (e.g. Clostridiales, Acidaminobacteraceae and Caldilinaceae). This suggested that the bioactivator was effective in promoting a shift from an anaerobic to an aerobic metabolism in the prokaryotic community. However, the larger importance of Lachnospiraceae (members of the gut and faecal microbiota of the farmed fishes) in treated compared to non-treated sediments suggested that the bioactivator was not efficient in reducing the accumulation of faecal bacteria from the farmed fishes. Our results indicate that bioremediation is a promising tool to mitigate the aquaculture impact in fish farm sediments, and that further research needs to be oriented to identifying more successful interventions able to specifically target also fish-faeces related microbes.

State of the art and future challenges for polycyclic aromatic hydrocarbons is sediments: sources, fate, bioavailability and remediation techniques

Polycyclic aromatic hydrocarbons (PAHs) are amongst the most abundant contaminants found in the aquatic environment. Due to their toxicity and carcinogenicity, their sources, fate, behaviour, and cleanup techniques have been widely investigated in the last several decades. When entering the sediment-water system, PAH fate is determined by particular PAH and sediment physico-chemical properties. Most of the PAHs will be associated with fine-grained, organic-rich, sediment material. This makes sediment an ultimate sink for these pollutants. This association results in sediment contamination, and in this manner, sediments represent a permanent source of water pollution from which benthic organisms may accumulate toxic compounds, predominantly in lipid-rich tissues. A tendency for biomagnification can result in critical body burdens in higher trophic species. In recent years, researchers have developed numerous methods for measuring bioavailable fractions (chemical methods, non-exhaustive extraction, and biomimetic methods), as valuable tools in a risk-based approach for remediation or management of contaminated sites. Contaminated sediments pose challenging cleanup and management problems, as conventional environmental dredging techniques are invasive, expensive, and sometimes ineffective or hard to apply to large and diverse sediment sites. Recent studies have shown that a combination of strategies including in situ approaches is likely to provide the most effective long-term solution for dealing with contaminated sediments. Such in situ approaches include, but are not limited to: bioaugmentation, biostimulation, phytoremediation, electrokinetic remediation, surfactant addition and application of different sorbent amendments (carbon-rich such as activated carbon and biochar) that can reduce exposure and limit the redistribution of contaminants in the environment.

Depth-related change of sulfate-reducing bacteria community in mangrove sediments: The influence of heavy metal contamination

This study provides new insight towards the effects of heavy metal contamination on sulfate-reducing bacteria (SRB) in mangrove ecosystem. We investigated SRB communities in mangrove sediments (0-30 cm depth) from Futian, Xixiang and Shajing mangrove wetlands in Shenzhen, China, with different heavy metal contamination levels. The results showed that SRB community abundance (1.71 × 10⁷-3.04 × 10⁸ dsrB gene copies g^-1 wet weight sediment) was depth-related and significantly correlated with Cd and Ni concentrations. The α-diversity indices of SRB community (Chao1 = 21.25-84.50, Shannon = 2.31-2.96) were significantly correlated with Cd level in mangrove sediments. Desulfobacteraceae, Desulfobulbaceae and Syntrophobacteraceae acted as major SRB groups in mangrove sediments, and Syntrophobacteraceae was most sensitive to metal contamination. UniFrace clustering analysis revealed that SRB community structure was influenced by the heavy metal concentrations. Moreover, redundancy analysis indicated that Cd and total phosphorus were the major environmental factors affecting the SRB structure in mangrove sediments.

Biosurfactant-induced remediation of contaminated marine sediments: Current knowledge and future perspectives

The contamination of marine sediments is widespread in coastal regions of the world and represents a major concern for the potential detrimental consequences on ecosystems' health and provision of goods and services for human wellbeing. Thus, there is an urgent need to find sustainable and eco-compatible solutions for the remediation of contaminated sediments. Bioremediation is a low cost and environmental-friendly strategy with a high potential for the remediation of contaminated marine sediments. Here we review the potential application of biosurfactants produced by microbial taxa for the remediation of contaminated marine sediments and we discuss future research needs to develop efficient and eco-sustainable biosurfactant-based strategies for the recovery of contaminated marine sediments, in view of large-scale applications.

Environmental Life Cycle Assessment of marine sediment decontamination by citric acid enhanced-microwave heating

The potential ability of microwave heating (MWH) for the remediation of marine sediments affected by severe hydrocarbon (HC) contamination was investigated. Decontamination effectiveness and environmental sustainability through a comparative Life Cycle Assessment (LCA) were addressed. Main results revealed that the application of a 650-W MWH treatment resulted in a rapid (15min) HC removal. A citric acid (CA) dose of 0.1M led to enhanced-HC removals of 76.9, 96.5 and 99.7% after 5, 10 and 15min of MW irradiation, respectively. The increase in CA dose to 0.2M resulted in a shorter successful remediation time of 10min. The exponential kinetic model adopted showed a good correlation with the experimental data with R² values in the 0.913-0.987 range. The nature of the MW treatment was shown to differently influence the HC fraction concentration after the irradiation process. Achieved HC removals in such a short remediation time are hardly possible by other clean-up techniques, making the studied treatment a potential excellent choice. Removal mechanisms, which allowed the enhanced-MWH to operate as a highly effective multi-step technique (pure thermal desorption+chemical washing), undoubtedly represent a key factor in the whole remediation process. The LCA highlighted that the MW technology is the most environmentally sustainable alternative for sediment decontamination applications, with a total damage, which was 75.74% lower than that associated with the EK (0.0503pt).

Rhizospheric microorganisms as a solution for the recovery of soils contaminated by petroleum: A review

Petroleum is currently the world's main energy source, and its demand is expected to increase in coming years. Its intense exploitation can lead to an increase in the number of environmental accidents, such as spills and leaks, and an increase in the generation of environmental liabilities resulting from refining. Due to its hydrophobic characteristics and slow process of biodegradation, petroleum can remain in the environment for a long time and its toxicity can cause a negative impact on both terrestrial and aquatic ecosystems, with the main negative effects related to its carcinogenic potential for both animals and humans. The objective of the present review is to discuss environmental contamination by oil, conventional treatment techniques and bioremediation an alternative tool for recovery petroleum-contaminated soils, focusing on the rhizodegradation process, plant growth-promoting rhizobacteria (PGPR), a phytoremediation strategy in which the microorganisms that colonize the roots of phytoremediatior plants are responsible for the biodegradation of petroleum. These microorganisms can be selected and tested individually or in the form of consortia to evaluate their potential for oil degradation, or even to measure the use of biosurfactants produced by them to constitute tools for the development of environmental recovery strategies and biotechnological application.

Bio-rescue of marine environments: On the track of microbially-based metal/metalloid remediation

The recent awareness of the huge relevance of marine resources and ecological services is driving regulatory demands for their protection from overwhelming contaminants, such as metals/metalloids. These contaminants enter and accumulate in different marine niches, hence deeply compromising their quality and integrity. Bioremediation has been flourishing to counteract metal/metalloid impacts, since it provides cost-effective and sustainable options by relying on ecology-based technologies. The potential of marine microbes for metal/metalloid bioremediation is the core of many studies, due to their high plasticity to overcome successive environmental hurdles. However, any thorough review on the advances of metal/metalloid bioremediation in marine environments was so far unveiled. This review is designed to (i) outline the characteristics and potential of marine microbes for metal/metalloid bioremediation, (ii) describe the underlying pathways of resistance and detoxification, as well as useful methodologies for their characterization, (iii) identify major bottlenecks on metal/metalloid bioremediation with marine microbes, (iv) present alternative strategies based on microbial consortia and engineered microbes for enhanced bioremediation, and (v) propose key research avenues to keep pace with a changing society, science and economy in a sustainable manner.

Optimization of hard clams, polychaetes, physical disturbance and denitrifying bacteria of removing nutrients in marine sediment

Marine organisms are known to play important roles in transforming nutrients in sediments, however, guidelines to optimize sediment restoration are not available. We conducted a laboratory mesocosm experiment to investigate the role of hard clams, polychaetes, the degree of physical disturbance and denitrifying bacterial concentrations in removing total nitrogen (TN), total phosphorus (TP), and total organic carbon (TOC) in marine sediments. Response surface methodology was employed to analyze the results of initial experiments and in a subsequent experiment identified optimal combinations of parameters. Balancing the TN, TP, TOC removal efficiency, our model predicted 39% TN removal, 33% TP removal, and 42% TOC removal for a 14-day laboratory bioremediation trial using hard clams biomass of 1.2kgm(-2), physical disturbance depth of 16.4cm, bacterial density of 0.18Lm(-2), and polychaetes biomass of 0.16kgm(-2), respectively. These results emphasize the value of combining different species in field-based bioremediation.

Aliphatic and polycyclic aromatic hydrocarbons risk assessment in coastal water and sediments of Khark Island, SW Iran

The potential sources and ecotoxicological risks of 26 aliphatic hydrocarbons (AHs), 16 polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs) were investigated in coastal water and sediments of Khark Island, SW Iran. The major sources of the contamination were petroleum and petroleum combustion based on the PCA analysis and diagnostic indices of AHs and PAHs, and also ring classification of PAHs. The ecological risk of both individual and multiple PAHs was quite low in sediments compared with screening benchmarks. Likewise, the low concentration of TEQ, MEQ and TEQ(carc) of sediments suggest low toxicity of PAHs in the study area. However, environmental control is recommended to reduce the pollution burden of PAHs in seawater. The human health risk assessment for PAHs through dermal adsorption indicated that the possibility of negative adverse effects of PAHs in sediments is rare but swimming in the vicinity of industrial facilities should be done cautiously.

Hydrocarbon pollutants shape bacterial community assembly of harbor sediments

Petroleum pollution results in co-contamination by different classes of molecules, entailing the occurrence of marine sediments difficult to remediate, as in the case of the Ancona harbor (Mediterranean Sea, Italy). Autochthonous bioaugmentation (ABA), by exploiting the indigenous microbes of the environment to be treated, could represent a successful bioremediation strategy. In this perspective we aimed to i) identify the main drivers of the bacterial communities' richness in the sediments, ii) establish enrichment cultures with different hydrocarbon pollutants evaluating their effects on the bacterial communities' composition, and iii) obtain a collection of hydrocarbon degrading bacteria potentially exploitable in ABA. The correlation between the selection of different specialized bacterial populations and the type of pollutants was demonstrated by culture-independent analyses, and by establishing a collection of bacteria with different hydrocarbon degradation traits. Our observations indicate that pollution dictates the diversity of sediment bacterial communities and shapes the ABA potential in harbor sediments.

An integrated bioremediation process for petroleum hydrocarbons removal and odor mitigation from contaminated marine sediment

This study developed a novel integrated bioremediation process for the removal of petroleum hydrocarbons and the mitigation of odor induced by reduced sulfur from contaminated marine sediment. The bioremediation process consisted of two phases. In Phase I, acetate was dosed into the sediment as co-substrate to facilitate the sulfate reduction process. Meanwhile, akaganeite (β-FeOOH) was dosed in the surface layer of the sediment to prevent S(2-) release into the overlying seawater. In Phase II, NO3(-) was injected into the sediment as an electron acceptor to facilitate the denitrification process. After 20 weeks of treatment, the sequential integration of the sulfate reduction and denitrification processes led to effective biodegradation of total petroleum hydrocarbons (TPH), in which about 72% of TPH was removed. In Phase I, the release of S(2-) was effectively controlled by the addition of akaganeite. The oxidation of S(2-) by Fe(3+) and the precipitation of S(2-) by Fe(2+) were the main mechanisms for S(2-) removal. In Phase II, the injection of NO3(-) completely inhibited the sulfate reduction process. Most of residual AVS and S(0) were removed within 4 weeks after NO3(-) injection. The 16S rRNA clone library-based analysis revealed a distinct shift of bacterial community structure in the sediment over different treatment phases. The clones affiliated with Desulfobacterales and Desulfuromonadales were the most abundant in Phase I, while the clones related to Thioalkalivibrio sulfidophilus, Thiohalomonas nitratireducens and Sulfurimonas denitrificans predominated in Phase II.

Bioleaching of multiple metals from contaminated sediment by moderate thermophiles

A moderately thermophilic consortium was applied in bioleaching multiple metals from contaminated sediment. The consortium got higher acidification and metals soubilization efficiency than that of the pure strains. The synergistic effect of the thermophilic consortium accelerated substrates utilization. The utilization of substrate started with sulfur in the early stage, and then the pH declined, giving rise to making use of the pyrite. Community dynamic showed that A. caldus was the predominant bacteria during the whole bioleaching process while the abundance of S. thermotolerans increased together with pyrite utilization. Solubilization efficiency of Zn, Cu, Mn and Cd reached 98%, 94%, 95%, and 89% respectively, while As, Hg, Pb was only 45%, 34%, 22%. Logistic model was used to simulate the bioleaching process, whose fitting degree was higher than 90%. Correlation analysis revealed that metal leaching was mainly an acid solubilization process. Fraction analysis revealed that metals decreased in mobility and bioavailability.

Co-liquefaction of sewage sludge and oil-tea-cake in supercritical methanol: yield of bio-oil, immobilization and risk assessment of heavy metals

In this study, attention was concentrated on the yields of bio-oil and toxicities of heavy metals (HMs) in liquefaction residues (LRs). Liquefaction of sewage sludge (SS) or oil-tea-cake (OTC) or mixtures of SS and OTC were carried out under the condition of supercritical methanol (SCM). Results showed that the addition of OTC extraordinarily increased the yields of oil from 37.9% (SS) to 86.2% (SS + OTC). Furthermore, with the liquefaction of SS and OTC mixture, the bioavailable fraction (F1 + F2) of Cd and Cu (F1 + F2) was decreased from 2.47 to 1.64 mg/kg and from 98.84 to 67.48 mg/kg, respectively. However, the bioavailable fraction of Zn (F1 + F2) increased from 122.03 to 204.69 mg/kg with the liquefaction of SS. The bioavailable fraction (F1 + F2) of Pb in LRs was 0%, which did not express any changes during the liquefaction process. Risk assessments of geo-accumulation index (I(geo)), risk assessment code (RAC) and modified potential ecological risk index (MRI) were applied to evaluate the bioavailabilities, the potential ecological risks and the pollution levels of HMs. The results show that the OTC in SS can decrease the risk of HMs in LRs. Cd attracted many concerns for the highest risk to the environment among all of the HMs. Here, the good results obtained means that SCM liquefaction of mixture of SS and OTC could be a preferable method for SS treatment.

Characterization and environmental risk assessment of heavy metals in construction and demolition wastes from five sources (chemical, metallurgical and light industries, and residential and recycled aggregates)

Total concentrations of heavy metals (Cu, Zn, Pb, Cr, Cd, and Ni) were measured among 63 samples of construction and demolition (C&D) wastes collected from chemical, metallurgical and light industries, and residential and recycled aggregates within China for risk assessment. The heavy metal contamination was primarily concentrated in the chemical and metallurgical industries, especially in the electroplating factory and zinc smelting plant. High concentrations of Cd were found in light industry samples, while the residential and recycled aggregate samples were severely polluted by Zn. Six most polluted samples were selected for deep research. Mineralogical analysis by X-ray fluorescence (XRF) spectrometry and X-ray diffraction (XRD), combined with element speciation through European Community Bureau of Reference (BCR) sequential extraction, revealed that a relatively slight corrosion happened in the four samples from electroplating plants but high transfer ability for large quantities of Zn and Cu. Lead arsenate existed in the acid extractable fraction in CI7-8 and potassium chromium oxide existed in the mobility fraction. High concentration of Cr could be in amorphous forms existing in CI9. The high content of sodium in the two samples from zinc smelter plants suggested severe deposition and erosion on the workshop floor. Large quantities of Cu existed as copper halide and most of the Zn appeared to be zinc, zinc oxide, barium zinc oxide, and zincite. From the results of the risk assessment code (RAC), the samples from the electroplating factory posed a very high risk of Zn, Cu, and Cr, a high risk of Ni, a middle risk of Pb, and a low risk of Cd. The samples from the zinc smelting plant presented a high risk of Zn, a middle risk of Cu, and a low risk of Pb, Cr, Cd, and Ni.

Biogeochemical Interactions In The Application Of Biotechnological Strategies To Marine Sediments Contaminated With Metals

Sediment contamination in coastal areas with high anthropogenic pressure is a widespread environmental problem. Metal contaminants are of particular concern, since they are persistent and cannot be degraded. Microorganisms can influence metal mobility in the sediment by several direct and indirect processes. However, the actual fate of metals in the environment is not easily predictable and several biogeochemical constraints affect their behaviour. In addition, the geochemical characteristics of the sediment play an important role and the general assumptions for soils or freshwater sediments cannot be extended to marine sediments. In this paper we analysed the correlation between metal mobility and main geochemical properties of the sediment. Although the prediction of metal fate in sediment environment, both forex-situbioleaching treatments andin-situbiostimulation strategies, appears to require metal-specific and site-specific tools, we found that TOM and pH are likely the main variables in describing and predicting Zn behaviour. Arsenic solubilisation/increase in mobility appears to correlate positively with carbonate content. Cd, Pb and Ni appear to require multivariate and/or non-linear approaches.

Biostimulation of petroleum-hydrocarbon-contaminated marine sediment with co-substrate: involved metabolic process and microbial community

This study investigated the effect of acetate and methanol as co-substrates on anaerobic biodegradation of total petroleum hydrocarbons (TPHs, C10-C40) in marine sediment. The findings evidenced that the degradation of TPH can be enhanced by adding acetate or methanol. The addition of acetate was generally more favorable than the addition of methanol for the TPH degradation. Both sulfate reduction and methanogenesis occurred in the acetate-treated sediment. However, the depletion of SO4 (2-) inhibited sulfate reduction over the incubation period. Only methanogenesis was prevalent in the methanol-treated sediment within the whole incubation period. The degradation of TPH fractions with higher carbon number ranges (C31-C40) was speculated to be more favored under sulfate-reducing condition, while TPH fractions with lower carbon number ranges (C10-C20) were preferentially degraded under methanogenic condition. The 16S rRNA clone library-based analysis revealed that the addition of different co-substrates led to distinct structures of the microbial community. Clones related to sulfate-reducing Desulfobacterales were the most abundant in the sediment dosed with acetate. Clones related to Clostridiales predominated in the sediment dosed with methanol. Acetoclastic methanogens were found to be the predominant archaeal species in the sediment dosed with acetate, while both acetoclastic methanogens and hydrogenotrophic methanogens accounted for large proportions in the sediment dosed with methanol. The results obtained in this study will contribute to more comprehensive knowledge on the role of acetate and methanol as co-substrates in biostimulation of petroleum-hydrocarbon-contaminated marine sediment.

Bioremediation of contaminated marine sediments can enhance metal mobility due to changes of bacterial diversity

Bioremediation strategies applied to contaminated marine sediments can induce important changes in the mobility and bioavailability of metals with potential detrimental consequences on ecosystem health. In this study we investigated changes of bacterial abundance and diversity (by a combination of molecular fingerprinting and next generation sequencing analyses) during biostimulation experiments carried out on anoxic marine sediments characterized by high metal content. We provide evidence that the addition of organic (lactose and/or acetate) and/or inorganic compounds to contaminated sediments determines a significant increase of bacterial growth coupled with changes in bacterial diversity and assemblage composition. Experimental systems supplied only with organic substrates were characterized by an increase of the relative importance of sulfate reducing bacteria belonging to the families Desulfobacteraceae and Desulfobulbaceae with a concomitant decrease of taxa affiliated with Flavobacteriaceae. An opposite effect was observed in the experimental treatments supplied also with inorganic nutrients. The increase of bacterial metabolism coupled with the increase of bacterial taxa affiliated with Flavobacteriaceae were reflected in a significant decrease of Cd and Zn associated with sedimentary organic matter and Pb and As associated with the residual fraction of the sediment. However, independently from the experimental conditions investigated no dissolution of metals occurred, suggesting a role of bacterial assemblages in controlling metal solubilization processes. Overall results of this study have allowed to identify key biogeochemical interactions influencing the metal behavior and provide new insights for a better understanding of the potential consequences of bio-treatments on the metal fate in contaminated marine sediments.

Total petroleum hydrocarbons and heavy metals in the surface sediments of Bohai Bay, China: long-term variations in pollution status and adverse biological risk

Surface sediments collected from 2001 to 2011 were analyzed for total petroleum hydrocarbons (TPH) and five heavy metals. The sediment concentration ranges of TPH, Zn, Cu, Pb, Cd and Hg were 6.3-535 μg/g, 58-332 μg/g, 7.2-63 μg/g, 4.3-138 μg/g, 0-0.98μg/g, and 0.10-0.68 μg/g, respectively. These results met the highest marine sediment quality standards in China, indicating that the sediment was fairly clean. However, based on the effects range-median (ERM) quotient method, the calculated values for all of the sampling sites were higher than 0.10, suggesting that there was a potential adverse biological risk in Bohai Bay. According to the calculated results, the biological risk decreased from 2001 to 2007 and increased afterwards. High-risk sites were mainly distributed along the coast. This study suggests that anthropogenic influences might be responsible for the potential risk of adverse biological effects from TPH and heavy metals in Bohai Bay.

Removal of Cu, Ni, Zn, Cd and Pb in Artificial Acid Mine Drainage by Modified Oxygen Releasing Compounds

The aim of the study is to investigate removal of Cu, Ni, Zn, Cd and Pb in acid mine drainage (AMD) using modified oxygen releasing compounds (MORCs) of which CaO2 is the main ingredient. When the MORCs are placed into AMDs, OH- will be released gently and continuously which can neutralize H+ and precipitate heavy metal ions as hydroxide/carbonates. Four types of artificial AMDs contained Cu, Ni, Zn, Cd and Pb ions with/without sulfate were prepared in the laboratory. The removal rates of the heavy metals were measured after adding MORCs to the artificial AMDs. The results showed that the removal rates of Cu, Ni, Zn, Cd and Pb in all 4 artificial AMDs, after 72 hours, are more than 97%, even to 100%. However, after 96 hours, Cu, Ni, Zn, Cd and Pb deposits can be re-dissolved by 16.4%, 11.2%, 7.0%, 5.0% and 4.8%, respectively, in the single-metal artificial AMDs; Pb and Cd deposits are more stable. Sulfate in the multi-metal artificial AMD hardly has effects on re-dissolution of the heavy metal deposits; and only Ni deposits in the single-metal AMD with sulfate and Cu deposits in the single-metal AMD without sulfate are re-dissolved significantly. It suggested that the MORCs should be an efficient material to remove Cu, Ni, Zn, Cd and Pb from AMDs after 72 hours than lime or limestone.

Influence of biogeochemical interactions on metal bioleaching performance in contaminated marine sediment

Bioleaching strategies are still far from finding real applications in sediment clean-up, although metabolic mechanisms governing bioleaching processes have been deeply studied and can be considered well established. In this study, we carried out bioleaching experiments, using autotrophic and heterotrophic acidophilic bacteria strains, and worked with marine sediments characterized by different geochemical properties and metal concentrations and speciations. The solubilization efficiency of the metals was highly variable, with the highest for Zn (40%-76%) and the lowest for Pb (0%-7%). Our data suggest that the role of autotrophic Fe/S oxidizing bacteria is mainly associated with the production and re-cycling of leaching chemical species, mainly as protons and ferric ions. Metal solubilization appears to be more related to establishing environmental conditions that allow each metal or semimetal to remain stable in the solution phase. Thus, the maintenance of acid and oxidative conditions, the chemical behavior in aqueous environment of each metal species and the geochemical characteristics of sediment interact intimately to influence metal solubilization in site-specific and metal-specific way.

Distribution and origin of trace metals in sediments of a marine park (Northern San Jorge Gulf) from Argentina

The Northern San Jorge Gulf (NSJG) was designated Interjurisdictional Coastal Marine Park "Patagonia Austral" in 2008 with the objective of conserving biodiversity and natural resources. Metals released to the environment can be accumulated by organisms and can be toxic in some cases, making it necessary to evaluate their presence and biological risk. This study examined concentrations of Fe, Mn, Zn, Cu, Cr, Ni, Cd and Pb in intertidal sediments of the NSJG, and was the first study of its kind to be conducted in this area. Concentrations of all metals fell below biological risk levels. Anthropogenic enrichment was only found for Ni around the Aristizábal lighthouse and was attributed to the frequent oil spills that impact this particular area.

Bioremediation of high organic load lagoon sediments: compost addition and priming effects

Lagoons are often affected by eutrophication phenomena, due to their shallow nature, high productivity, weak hydrodynamism and anthropic exploitation. Bioremediation techniques have been widely used in the treatment of chemical pollution; however, no information is available on the use of bioremediation of organic-rich sediments. In the present study, we investigated the priming effects following compost addition to organic-rich lagoon sediments, and the effects of this compost addition on degradation and cycling of organic detritus, transfer of organic matter to higher trophic levels, and in situ prokaryotic community structure. There was a positive response to treatment, particularly during the first days after compost addition. The compost had a stimulating effect on degradation activity of the prokaryotic community. This occurred despite an increase in available organic matter, as the community was more efficient at removing it. These data are supported by the prokaryotic community structure analysis, which revealed no changes in the in situ community following compost addition. This priming effect enhancement through compost addition represents an efficient method to treat organic-rich sediments.

High bacterial biodiversity increases degradation performance of hydrocarbons during bioremediation of contaminated harbor marine sediments

We investigated changes of bacterial abundance and biodiversity during bioremediation experiments carried out on oxic and anoxic marine harbor sediments contaminated with hydrocarbons. Oxic sediments, supplied with inorganic nutrients, were incubated in aerobic conditions at 20 °C and 35 °C for 30 days, whereas anoxic sediments, amended with organic substrates, were incubated in anaerobic conditions at the same temperatures for 60 days. Results reported here indicate that temperature exerted the main effect on bacterial abundance, diversity and assemblage composition. At higher temperature bacterial diversity and evenness increased significantly in aerobic conditions, whilst decreased in anaerobic conditions. In both aerobic and anaerobic conditions, biodegradation efficiencies of hydrocarbons were significantly and positively related with bacterial richness and evenness. Overall results presented here suggest that bioremediation strategies, which can sustain high levels of bacterial diversity rather than the selection of specific taxa, may significantly increase the efficiency of hydrocarbon degradation in contaminated marine sediments.

Effects of prokaryotic diversity changes on hydrocarbon degradation rates and metal partitioning during bioremediation of contaminated anoxic marine sediments

We investigated changes of prokaryotic diversity during bioremediation experiments carried out on anoxic marine sediments characterized by high hydrocarbon and metal content. Microcosms containing contaminated sediments were amended with lactose and acetate and incubated in anaerobic conditions up to 60 d at 20 or 35 °C. Microcosms displaying higher degradation efficiency of hydrocarbons were characterized by the dominance of Alphaproteobacteria and Methanosarcinales and the lack of gene sequences belonging to known hydrocarbonoclastic bacteria. Multivariate analyses support the hypothesis that Alphaproteobacteria are important for hydrocarbon degradation and highlight a potential synergistic effect of archaea and bacteria in changes of metal partitioning. Overall, these results point out that the identification of changes in the prokaryotic diversity during bioremediation of contaminated marine sediments is not only important for the improvement of bio-treatment performance towards hydrocarbons, but also for a better comprehension of changes occurring in metal partitioning which affect their mobility and toxicity.

Assessment of biotechnological strategies for the valorization of metal bearing wastes

The present work deals with the application of biotechnology for the mobilization of metals from different solid wastes: end of life industrial catalysts, heavy metal contaminated marine sediments and fluorescent powders coming from a cathode ray tube glass recycling process. Performed experiments were aimed at assessing the performance of acidophilic chemoautotrophic Fe/S-oxidizing bacteria for such different solid matrices, also focusing on the effect of solid concentration and of different substrata. The achieved results have evidenced that metal solubilization seems to be strongly influenced by the metal speciation and partitioning in the solid matrix. No biological effect was observed for Ni, Zn, As, Cr mobilization from marine sediments (34%, 44%, 15%, 10% yields, respectively) due to metal partitioning. On the other hand, for spent refinery catalysts (Ni, V, Mo extractions of 83%, 90% and 40%, respectively) and fluorescent powders (Zn and Y extraction of 55% and 70%, respectively), the improvement in metal extraction observed in the presence of a microbial activity confirms the key role of Fe/S oxidizing bacteria and ferrous iron. A negative effect of solid concentration was in general observed on bioleaching performances, due to the toxicity of dissolved metals and/or to the solid organic component.

Total concentrations and chemical speciation of heavy metals in liquefaction residues of sewage sludge

The risk (including bioavailability and eco-toxicity) of heavy metals (Pb, Zn, Cu, Cd, Cr and Ni) in liquefaction residues (LR) of sewage sludge (SS) was estimated, according to both the speciation of heavy metals and the local environmental characteristics. The amount of organic matters in LR was lower than that in SS, resulting in a smaller calorific value, while the total content of heavy metals in LR nearly doubled. High residual rates of heavy metals (about 80%) indicated that the heavy metals in SS were concentrated into LR after liquefaction. The comparisons of sequential extraction results between SS and LR showed that after liquefaction, the mobile and easily available heavy metal fractions (acid soluble/exchangeable and reducible fractions) were mainly transformed into the relatively stable heavy metal fractions (oxidizable and residual fractions). The bioavailability and eco-toxicity of heavy metals in LR were relieved, though the total concentrations of heavy metals increased.