Development and validation of a method for the simultaneous extraction and separate measurement of oxytetracycline, florfenicol, oxolinic acid and flumequine from marine sediments

Quinoline Derivatives in Discovery and Development of Pesticides

Finding highly active molecular scaffold structures is always the key research content of new pesticide discovery. In the research and development of new pesticides, the discovery of new agricultural molecular scaffold structures and new targets still faces great challenges. In recent years, quinoline derivatives have developed rapidly in the discovery of new agriculturally active molecules, especially in the discovery of fungicides. The unique quinoline scaffold has many advantages in the discovery of new pesticides and can provide innovative and feasible solutions for the discovery of new pesticides. Therefore, we reviewed the use of quinoline derivatives and their analogues as molecular scaffolds in the discovery of new pesticides since 2000. We systematically summarized the agricultural biological activity of quinoline compounds and discussed the structure-activity relationship (SAR), physiological and biochemical properties, and mechanism of action of the active compounds, hoping to provide ideas and inspiration for the discovery of new pesticides.

Accurate determination of four tetracycline residues in chicken meat by isotope dilution-liquid chromatography/tandem mass spectrometry

An analytical method based on isotope dilution-liquid chromatography-tandem mass spectrometry (ID-LC‒MS/MS) was developed to accurately determine four representative tetracyclines (tetracycline, chlortetracycline, doxycycline, and oxytetracycline) in chicken meat. Tetracyclines are known to have a great tendency for epimerization and keto-enol tautomerism, which often provoke major challenges in their determination. Since this isomerization was found to be unavoidable during the whole chain of the current analysis, the total content (µg kg^‒1) of individual tetracycline was quantified as a sum of each parent compound and its respective isomeric forms. Using this approach in combination with IDMS analysis, more consistent, accurate, and reproducible measurement results for the four tetracyclines in chicken meat were acquired. LC-MS/MS conditions and sample preparation processes were comprehensively optimized to minimize the chelating effect of tetracyclines and possible co-extracted interferences. Details of the sample preparation scheme, LC‒MS/MS detection, calculation equation, and method validation are described in this article. The method provided very good accuracy (97.7-102.6%) for all analytes across the concentration range of 10-200 µg kg^‒1, with relative standard deviations for intra-day and inter-day precision of less than 4%. The limits of quantification were below 0.2 µg kg^‒1, demonstrating the high sensitivity of the method. Furthermore, the measurement uncertainty was generally below 5.5%. Hence, the established method exhibits high-order metrological quality with superior performance over various existing methodologies. Moreover, this method can provide references for general food testing laboratories close to and far below the established maximum residue limits (100 µg kg^‒1) for animal muscle tissues.

Adsorption-reduction coupling mechanism and reductive species during efficient florfenicol removal by modified biochar supported sulfidized nanoscale zerovalent iron

Sulfidized nanoscale zerovalent iron (S-nZVI) was a promising material for degrading halogenated contaminants, but the easy aggregation limits its application for in-situ groundwater remediation. Hence, S-nZVI was decorated onto modified biochar (mBC) to obtain better dispersity and reactivity with florfenicol (FF), a widely used antibiotic. Uniform dispersion of S-nZVI particles were achieved on the mBC with plentiful oxygen-containing functional groups and negative surface charge. Thus, the removal rate of FF by S-nZVI@mBC was 2.5 and 3.1 times higher than that by S-nZVI and S-nZVI@BC, respectively. Adsorption and dechlorination of FF showed synergistic effect under appropriate mBC addition (e.g., C/Fe mass ratio = 1:3, 1:1), probably due to the enrichment of FF facilitates its reduction. In contrast, the contact between FF and S-nZVI could be hindered under more mBC addition, significantly decrease the reduction rate of FF and the reduction capacity of per unit Fe⁰. In addition, sulfur dose altered the surface species of surface Fe and S, and removal rates of FF correlated well with surface reductive species, i.e., FeS (r = 0.90, p < 0.05) and Fe⁰ (r = 0.98, p < 0.01). These mechanistic insights indicate the importance of rational design for biochar supported S-nZVI, which can lead to more efficient FF degradation.

Effects of aquaculture waste feeds and antibiotics on marine benthic ecosystems in the Mediterranean Sea

Intensive aquaculture is an important source of organic waste and antibiotics into the marine environment. Yet, their impacts on benthic marine ecosystems are poorly understood. Here, we investigated the ecological impacts of fish feed waste alone and in combination with three different antibiotics (i.e., oxytetracycline, florfenicol and flumequine) in benthic ecosystems of the Mediterranean Sea by performing a field experiment. We assessed the fate of the antibiotics in the sediment and their accumulation in wild fauna after two weeks of exposure. Moreover, we investigated the impact of the feed waste alone and in combination with the antibiotics on sediment physico-chemical properties, on benthic invertebrates, as well as on the microbiota and resistome of the sampled sediments. One week after the last antibiotic application, average oxytetracycline and flumequine concentrations in the sediment were <1% and 15% of the applied dose, respectively, while florfenicol was not detected. Flumequine concentrations in wild invertebrates reached 3 μg g^-1, while concentrations of oxytetracycline were about an order of magnitude lower, and florfenicol was not detected. Feed waste, with and without antibiotics, increased the concentration of fine particulate matter, affected the pH and redox conditions, and significantly reduced the biodiversity and abundance of benthic invertebrates. Feed waste also had a significant influence on the structure of sediment microbial communities, while specific effects related to the different antibiotics ranged from insignificant to mild. The presence of antibiotics significantly influenced the normalized abundance of the measured antibiotic resistance genes. Florfenicol and oxytetracycline contributed to an increase of genes conferring resistance to macrolides, tetracyclines, aminoglycosides and chloramphenicol, while flumequine had a less clear impact on the sediment resistome. This study demonstrates that feed waste from aquaculture farms can rapidly alter the habitat and biodiversity of Mediterranean benthic ecosystems, while antibiotic residual concentrations can contribute to the enrichment of bacterial genes resistant to antibiotic classes that are of high relevance for human medicine.

Evaluation of health and environmental risks for juvenile tilapia (Oreochromis niloticus) exposed to florfenicol

Intensive fish cultivation has a high incidence of infection, which is often controlled by administering antibiotics. Florfenicol (FF) is one of the two antimicrobial drugs permitted for aquaculture in Brazil. Due to their intensive use, potentially harmful effects on aquatic organisms are of great concern. In this sense, we investigated whether the presence of FF in cultivation water could change the health parameters of Nile tilapia. For this, we evaluated hemoglobin, hematocrit, mean corpuscular hemoglobin (MCHC) concentration, mean corpuscular volume (MCV), total plasma protein (TPP), number of circulating red blood cells and leukocytes, as lipid peroxidation levels, catalase activity and glutathione S-transferase activity of fish exposed to 11.72 mg L⁻¹ of FF in water for 48 h. The fish were divided into two groups: Nile tilapia in water with FF or without FF (control). Exposure to FF in cultivation water for a short period didn't change the hematological variables analyzed, but caused changes in liver ROS (Reactive oxygen species) markers of the Nile tilapia, which was revealed by lipid peroxidation levels, catalase activity, and glutathione S-transferase. The 48h exposure period was enough to induce oxidative stress in hepatocytes, causing cellular oxidative damage. Therefore, the antibiotic florfenicol may cause toxicity to organisms and aquatic ecosystems, even at a sublethal concentrations near 1/100 LC50-48h for fish species.

Florfenicol Binding to Molecularly Imprinted Polymer Nanoparticles in Model and Real Samples

A simple and straightforward technique for coating microplate wells with molecularly imprinted polymer nanoparticles (nanoMIPs) to develop assays similar to the enzyme-linked immunosorbent (ELISA) assay to determine and quantify florfenicol (FF) in real food samples such as liquid milk and salmon muscle is presented here. The nanoMIPs were synthesized by a solid-phase approach with an immobilized FF (template) and characterized using dynamic light scattering, a SPR-2 biosensor system and transmission electron microscopy. Immobilization of nanoMIPs was conducted by preparing a homogenous solution of FF-nanoMIPs in water mixed with polyvinyl alcohol (PVA) 0.2% (w/v) in each well of a microplate. The detection of florfenicol was achieved in competitive binding experiments with a horseradish peroxidase-florfenicol (FF-HRP) conjugate. The assay made it possible to measure FF in buffer and in real samples (liquid milk and salmon muscle) within the range of 60-80 and 90-100 ng/mL, respectively. The immobilized nanoMIPs were stored for six weeks at room temperature and at 5 °C. The results indicate good signal recovery for all FF concentrations in spiked milk samples, without any detrimental effects to their binding properties. The high affinity of nanoMIPs and the lack of a requirement for cold chain logistics make them an attractive alternative to traditional antibodies used in ELISA.

Multi-class determination of steroid hormones and antibiotics in fatty hotpot ingredients by pressurized liquid extraction and liquid chromatography-tandem mass spectrometry

Due to the misuse of hormones and antibiotics resulting in drug residues in meat products, serious concerns have arisen regarding to the potential risks for human health. In this paper, a simple and efficient method was developed to simultaneously quantify six steroid hormones and six antibiotics in fatty foods by combining pressurized liquid extraction (PLE) with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Adsorbents, extraction temperature, extraction time, recycle time and several other parameters were optimized in current investigation. The optimized PLE method was employed by using n-hexane-methanol-acetonitrile (2:1:1, v/v/v) as extraction solvent, silica gel as lipid sorbent, and the optimum parameters were 60 °C, 1500 psi and 10 min, respectively. Under the optimal conditions, the recoveries of spiked samples ranged from 82.2% to 115.0%. The limits of quantifications (LODs) were from 0.4 to 25.0 μg/kg. The developed PLE method was successfully applied to analyze steroid hormones and antibiotics in 27 fatty foods of hotpot ingredients without any additional clean-up steps. The results showed that the residues of estradiol benzoate (EB) and enrofloxacin (EN) in some matrices were much higher than maximum residue limits (MRLs) value, especially EB in fish, which exceeded 176.7 μg/kg. The results demonstrated that the developed method was sensitive and efficient in testing hotpot ingredients, and was an excellent analytical tool for monitoring residues of steroid hormones and antibiotics in fatty foods.

An optimized sample treatment method for the determination of antibiotics in seawater, marine sediments and biological samples using LC-TOF/MS

Antibiotics used in marine aquaculture have been reported to accumulate in sediments and non-target aquatic organisms, modifying the biodiversity and the environmental conditions in areas close to the fish farms. Improved analytical methods are required to assess the spread and the impacts of aquaculture antibiotics in the marine environment, as well as to estimate resistance development risks. In this study, we have optimized a method for simultaneous quantitative determination of oxytetracycline, florfenicol and flumequine in marine samples using liquid chromatography coupled to time-of-flight high resolution mass spectrometry (LC-TOF/MS). The method optimization was carried out for seawater, sediment and biological samples (biofilm and two benthic invertebrate species: Gammarus aequicauda and Monodonta articulata). Special attention was paid to the optimization of the extraction and purification steps, testing: liquid-liquid and solid-liquid extractions, the use of silica and other commercial sorbents' clean-up, and single and tandem solid phase extraction procedures. The limits of quantification (MQLs) achieved with the developed method are 0.1-0.5 μg L-¹ in seawater; 1-5 μg kg^-1 in marine sediments; 5-25 μg kg^-1 in biofilm; and 100-500 μg kg^-1 in invertebrates, with good accuracy and precision. Method recoveries in spiked samples are 65-120% in seawater and sediment samples, and 63-110% in the biological samples. The method has been successfully implemented for the determination of antibiotic concentrations in sediment and invertebrate samples collected from a Mediterranean bay in south-east Spain. These represent significant advances in the analysis of antibiotics in environmental samples, especially for wild marine taxa, and attend for a proper assessment of the environmental fate and side effects of aquaculture antibiotics in the marine environment.

Evaluation of the leaching of florfenicol from coated medicated fish feed into water

Florfenicol is one of the most-used antimicrobial agents in global fish farming. Nevertheless, in most countries, its use is not conducted in accordance with good practices. The aim of this work was to evaluate the leaching of florfenicol from coated fish feed into the water. Analytical methods were developed and validated for the quantitation of florfenicol in medicated feed and water by UHPLC-MS/MS. Florfenicol residues in the water were quantified after 5- and 15-min exposures of the medicated feed in the water at 22 and 28 °C and at pH 4.5 and 8.0. The influence of pellet size and three coating agents (vegetable oil, carboxymethylcellulose, and low-methoxylated pectin) on the leaching of the drug was also assessed. Pellet size, coating agent, water temperature, and time of exposure significantly (p < 0.05) affected florfenicol leaching, while water pH did not interfere with the leaching. Coating with vegetable oil was the most efficient method to reduce florfenicol leaching, while coating with carboxymethylcellulose presented the highest leaching (approximately 60% after 15 min at 28 °C). Thus, the coating agent has a significant effect on the florfenicol leaching rate and, consequently, on the necessary dose of the drug to be administered. Moreover, it is worth mentioning that higher florfenicol leaching will pose a greater risk to environmental health, specifically in terms of the development of bacteria resistant to florfenicol. Additional studies are needed with other polymers and veterinary drugs used in medicated feed for fish farming.

Distribution, sources, and ecological risk assessment of quinotone antibiotics in the surface sediments from Jiaozhou Bay wetland, China

The distribution, sources, and risk assessment of eight quinotone antibiotics (QNs) in the surface sediments from the wetland in Jiaozhou Bay were investigated. The results showed that QNs were detected in all samples, and the total concentrations of QNs in the sediments ranged from 0.276 to 5.229ng/g. The highest concentration occurred at the entrance to the Yang River wetland. Principal component analysis suggested that the QNs mainly originated from sewage discharges from hospitals, human and aquaculture industries. Risk assessment, based on risk quotients, indicated the current ofloxacin level might be a medium risk level, while other QNs were all low risk. Nevertheless, there should still be concerns due to high consumption of QNs by human beings, animals, and aquatic organisms in the wetland. This investigation provides baseline data that the government can use as a reference guide to control QNs residues in Jiaozhou Bay wetland.

Treatment of florfenicol of synthetic trout fish farm wastewater through nanofiltration and photocatalyst oxidation

The aquaculture system is a potential significant source of antibacterial agents. The removal of florfenicol (Flo) antibiotic from synthetic aqueous wastewater is performed by applying a commercial thin film composite polyamide nanofilter (NF). For concentrated wastewater treatment, the advanced oxidation process (AOP) is applied. The effects of pH, pressure and Flo concentration on removal efficiency of NF and the effects of pH, Flo concentration and dosage of hydrogen peroxide and contact time on the AOP are assessed. In the nanofiltration system, it is found that an increase in pH enhances the removal efficiency up to 99%. In this membrane, an increase of pressure between 4 and 7 bar would increase the removal percentage, followed by a decrease from 7 to 10 bar. In AOP, it is observed that the degradation efficiency of Flo increases by both an increase in its initial concentration up to values above 50 ppm and contact time. The degradation efficiency of Flo is at its highest in the pH range of 7-10. With increasing H₂O₂ dosage, from 0 to 500 ppm, the removal efficiency increases. The results of this study indicate that a combination of a polyamide nanofilteration together with an AOP introduces an effective manner of removing Flo antibiotic from synthetic trout fish farm wastewater.

Carbon dots based turn-on fluorescent probes for oxytetracycline hydrochloride sensing

A well-designed turn-on sensor has been constructed and used for the assay of oxytetracycline hydrochloride in real milk samples.

Simultaneous Determination of Florfenicol and Diclazuril in Compound Powder by RP-HPLC-UV Method

A RP-HPLC-UV method was developed and validated for simultaneous determination of florfenicol and diclazuril in compound powder. The separation involved using a SinoChoom ODS-BP C18(5 μm, 4.6 mm × 250 mm) analytical column. The mobile phase was a mixture of acetonitrile-0.2% phosphoric acid (pH was adjusted to 3.0 with triethylamine). The ratio of acetonitrile and 0.2% phosphoric acid in the mobile phase was 60 : 40 (v/v) from 0 minutes to 6 minutes and 70 : 30 (v/v) from 6.1 minutes to 15 minutes. The flow rate was 1 mL/min. The temperature of the analytical column was maintained at 30°C. The detection was monitored at 225 nm and 277 nm for florfenicol and diclazuril, respectively. The excipients in the compound powder did not interfere with the drug peaks. The calibration curves of florfenicol and diclazuril were fairly linear over the concentration ranges between 50.0–500.0 μg/mL (r=0.9995) and 10.0–100.0 μg/mL (r=0.9992), respectively. The RSD of both the intraday and interday variations was below 2.1% for florfenicol and diclazuril. The method was successfully validated according to International Conference on Harmonisation and proved to be suitable for the simultaneous determination of florfenicol and diclazuril in compound powder.