Biodegradation of crude oil by Pseudomonas aeruginosa and Escherichia fergusonii isolated from the Goan coast

Enhanced bioremediation of cyclohexaneacetic acid in offshore sediments with green synthetic iron oxide and Pseudoalteromonas sp

Naphthenic acids (NAs) have been found to exert serious threats on offshore sediment ecosystems and human health in recent years, which entails us the urgent need for NAs remediation. Bioremediation is considered an ideal method for sediment remediation due to ecological sustainability and economic feasibility. However, current bioremediation efficiency of offshore sediments suffers from relatively slow and there has never any attempts to bioremediate offshore sediment NAs contamination hitherto. In this study, the green synthetic iron oxides (gFeOx) based on Laminaria extracts was employed to enhance the biodegradation of NAs (Cyclohexylacetic acid, CHAA) in offshore sediments by Pseudoalteromonas sp. JSTW (an indigenous microorganism). The results showed that CHAA (20 mg·kg-1) in offshore sediments was removed almost 100% within 7 days at 30 mg·kg-1 gFeOx and 0.6 mg·kg-1 Strain JSTW. High-throughput sequencing results revealed that the structure and function of sediment microbial community were essentially restored to uncontaminated levels after bioremediation, highlighting the joint remediation approach is an efficient and eco-friendly method. Overall, this work has firstly provided insights into the application for NAs in situ bioremediation in offshore sediments.

Differential degradation of petroleum hydrocarbons by Shewanella putrefaciens under aerobic and anaerobic conditions

The complexity of crude oil composition, combined with the fluctuating oxygen level in contaminated environments, poses challenges for the bioremediation of oil pollutants, because of compound-specific microbial degradation of petroleum hydrocarbons under certain conditions. As a result, facultative bacteria capable of breaking down petroleum hydrocarbons under both aerobic and anaerobic conditions are presumably effective, however, this hypothesis has not been directly tested. In the current investigation, Shewanella putrefaciens CN32, a facultative anaerobic bacterium, was used to degrade petroleum hydrocarbons aerobically (using O2 as an electron acceptor) and anaerobically (using Fe(III) as an electron acceptor). Under aerobic conditions, CN32 degraded more saturates (65.65 ± 0.01%) than aromatics (43.86 ± 0.03%), with the following order of degradation: dibenzofurans > n-alkanes > biphenyls > fluorenes > naphthalenes > alkylcyclohexanes > dibenzothiophenes > phenanthrenes. In contrast, under anaerobic conditions, CN32 exhibited a higher degradation of aromatics (53.94 ± 0.02%) than saturates (23.36 ± 0.01%), with the following order of degradation: dibenzofurans > fluorenes > biphenyls > naphthalenes > dibenzothiophenes > phenanthrenes > n-alkanes > alkylcyclohexanes. The upregulation of 4-hydroxy-3-polyprenylbenzoate decarboxylase (ubiD), which plays a crucial role in breaking down resistant aromatic compounds, was correlated with the anaerobic degradation of aromatics. At the molecular level, CN32 exhibited a higher efficiency in degrading n-alkanes with low and high carbon numbers relative to those with medium carbon chain lengths. In addition, the degradation of polycyclic aromatic hydrocarbons (PAHs) under both aerobic and anaerobic conditions became increasingly difficult with increased numbers of benzene rings and methyl groups. This study offers a potential solution for the development of targeted remediation of pollutants under oscillating redox conditions.

Identification of acacia gum fermenting bacteria from pooled human feces using anaerobic enrichment culture

Commercial acacia gum (AG) used in this study is a premium-grade free-flowing powder. It is a gummy exudate composed of arabinogalactan branched polysaccharide, a biopolymer of arabinose and galactose. Also known as food additive, acacia gum (E414), which is presently marketed as a functional dietary fiber to improve overall human gut health. The health effects may be related to the luminal pH regulation from the short-chain fatty acids (SCFA) production. Studies suggested that amylolytic and butyrogenic pathways are the major factors determining the SCFA outcome of AG in the lower gut. However, the primary bacteria involved in the fermentation have not been studied. This study aimed to investigate the putative primary degraders of acacia gum in the gut ecosystem. Isolation and identification of gum-fermenting bacteria were performed through enrichment culture fermentation. The experiment was conducted in an anaerobic chamber for 144 h in three stages. The study was conducted in triplicate using an anaerobic chamber system. This culture system allows specific responses to support only bacteria that are responsible for gum fermentation among the gut microbiota. Five bacterial strains were isolated and found to be gum-fermenting bacteria. Based on the 16s RNA sequence, the isolates matched to butyrate-producing Escherichia fergusonii, ATCC 35469.

Potential of sediment bacterial communities from Manila Bay (Philippines) to degrade low-density polyethylene (LDPE)

The persistence of plastics and its effects in different environments where they accumulate, particularly in coastal areas, is of serious concern. These plastics exhibit signs of degradation, possibly mediated by microorganisms. In this study, we investigated the potential of sediment microbial communities from Manila Bay, Philippines, which has a severe plastics problem, to degrade low-density polyethylene (LDPE). Plastics in selected sites were quantified and sediment samples from sites with the lowest and highest plastic accumulation were collected. These sediments were then introduced and incubated with LDPE in vitro for a period of 91 days. Fourier transform infrared spectroscopy detected the appearance of carbonyl and vinyl products on the plastic surface, indicating structural surface modifications attributed to polymer degradation. Communities attached to the plastics were profiled using high-throughput sequencing of the V4-V5 region of the 16S rRNA gene. Members of the phylum Proteobacteria dominated the plastic surface throughout the experiment. Several bacterial taxa associated with hydrocarbon degradation were also enriched, with some taxa positively correlating with the biodegradation indices, suggesting potential active roles in the partial biodegradation of plastics. Other taxa were also present, which might be consuming by-products or providing nourishment for other groups, indicating synergy in utilizing the plastic as the main carbon source and creation of a microenvironment within the plastics biofilm. This study showed that sediment microbes from Manila Bay may have naturally occurring microbial groups potentially capable of partially degrading plastics, supporting previous studies that the biodegradation potential for plastics is ubiquitously present in marine microbial assemblages.

Nitrogen dependence of rhamnolipid mediated degradation of petroleum crude oil by indigenous Pseudomonas sp. WD23 in seawater

Effect of oil spills on living forms demands for safe, ecofriendly and cost-effective methods to repair the damage. Pseudomonads have exceptional tolerance to xenobiotics and can grow at varied environmental conditions. This study aims at biosurfactant mediated degradation of petroleum crude oil by an indigenous Pseudomonas sp. WD23 in sea water. Pseudomonas sp. WD23 degraded 34% of petroleum crude oil (1.0% v/v) on supplementation of yeast extract (0.05 g/L) with glucose (1.0 g/L) in seawater. The strain produced a biosurfactant which was confirmed as a rhamnolipid (lipid: rhamnose 1:3.35) by FT-IR, LCMS and quantitative analysis. Produced rhamnolipid had low CMC (20.0 mg/L), emulsified petroleum oils (75-80%) and had high tolreance to varied conditions of pH, temperature and ionic strength. OFAT studies were performed to analyse the effect of petroleum crude oil, glucose, inoculum, yeast extract, pH, agitation speed and incubation time on degradation by Pseudomonas sp. WD23. Petroleum crude oil and glucose had significant effect on biodegradation, rhamnolipid production and growth, further optimized by central composite design. At optimum conditions of 3.414% v/v PCO and 6.53 g/L glucose, maximum degradation of 81.8 ± 0.67% was observed at pH 7.5, 100 RPM, 15.0% v/v inoculum in 28 days, with a 3-fold increase in biodegradation. GCMS analysis revealed degradation (86-100%) of all low and high molecular weight hydrocarbons present in petroleum crude oil. Hence, the strain Pseudomonas sp. WD23 can be effectively developed for management of oil spills in seas and oceans due to its excellent degradation abilities.

Clostridium weizhouense sp. nov., an anaerobic bacterium isolated from activated sludge of petroleum wastewater

A Gram-stain-positive, anaerobic, spore-forming, rod-shaped (0.4–0.6 µm×2.5–3.2 µm), flagellated bacterium, designated strain YB-6T, was isolated from activated sludge of an anaerobic tank at Weizhou marine oil mining wastewater treatment plant in Beihai, Guangxi, PR China. The culture conditions were 25–45 °C (optimum, 37 °C), pH 4–12 (pH 7.0) and NaCl concentration of 0–7 % w/v (0%). Strain YB-6T grew slowly in petroleum wastewater and removed 68.2 % of the total organic carbon in petroleum wastewater within 10 days. Concentrations of naphthalene, anthracene and phenanthrene at an initial concentration of 50 mg l−1 were reduced by 32.8, 40.4 and 14.6 %, respectively, after 7 days. Phylogenetic analysis of the 16S rRNA gene sequence indicated that strain YB-6T belongs to Clostridium cluster I and is most closely related to Clostridium uliginosum CK55T (98.5 % similarity). The genome size of strain YB-6T was 3.96 Mb, and the G+C content was 26.5 mol%. The average nucleotide identity value between strain YB-6T and C. uliginosum CK55T was 81.9 %. The major fatty acids in strain YB-6T were C14 : 0 FAME, C16 : 0 FAME and summed feature 4 (unknown 14.762 and/or C15 : 2 FAME). The main polar lipids were diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, five unidentified aminophospholipids, one unidentified glycolipid and one unidentified aminolipid. Diaminopimelic acid was not detected in the strain YB-6T cell walls. Whole-cell sugars mainly consisted of ribose and galactose. Based on the results of phenotypic and genotypic analyses, strain YB-6T represents a novel species of the genus Clostridium , for which the name Clostridium weizhouense sp. nov. is proposed. The type strain is YB-6T (=GDMCC 1.2529T=JCM 34754T).

Crude Oil Degradation by a Novel Strain Pseudomonas aeruginosa AQNU-1 Isolated from an Oil-Contaminated Lake Wetland

In this study, a novel crude oil degrading bacterium was isolated from an oil-contaminated freshwater lake using crude oil as the sole carbon source. The strain was named Pseudomonas aeruginosa AQNU-1 based on the analyses of its morphological characteristics and 16S rRNA gene sequencing. Gas chromatography-mass spectrometry (GC-MS) was carried out to investigate the degradation of crude oil fractions under dynamic (37 °C, 180 r/min) and static (37 °C, 0 r/min) cultivation over three months of continuous enrichment in the laboratory. It was found that strain AQNU-1 exhibited stronger biodegradation efficiency for n-alkanes of C13–C35 under dynamic cultivation with degradation ratios of 87–100% compared to ratios of 74–100% under static cultivation. Furthermore, this strain could fully utilize alkylcyclohexane (M/Z 82), alkylbenzene (M/Z 92) and alkyltoluene (M/Z 106) in crude oil under both conditions. It also had better biodegradability of partial aromatic compounds in the crude oil, showing differences within compound families of aromatic hydrocarbons. Further, the potential degradation ability of this isolated strain decreased with increasing molecular weight, with the dynamic condition performing better in general. These results suggest that the isolated strain has great potential to assimilate indigestible crude-oil contaminants under different hydrological conditions, providing a valuable microbiological resource for in situ remediation of natural wetlands.

Bioremediation of marine oil spills by immobilized oil-degrading bacteria and nutrition emulsion

The combination of bioaugmentation and biostimulation was used to speed up the bioremediation of marine oil spills. A novel carrier material that consisted of puffed panicum miliaceum (PPM), calcium alginate and chitosan was prepared. The porous structure and low density of PPM ensured this carrier material not only had appropriate physical and biological properties for the aggregation of microorganisms but also was biodegradable and floating on the seawater surface for bioremediation of oil pollution. An oil-degrading bacterial consortium was immobilized via adsorption on the carrier material. The immobilized bacteria were observed with scanning electron microscopy. The number of viable cells immobilized on the material was approximately 1.12 × 10⁸ CFU/g. To solve the problem of nutrients supplementation in seawater, an emulsion formed with urea solution, soybean lecithin, alcohol and oleic acid was prepared as oleophilic fertilizer. The results from laboratory and field mesocosm experiments showed that the combination of immobilized bacteria and the emulsion achieved a higher oil removal efficiency compared with the use of them separately. The results of field mesocosm experiments conducted in the coastal seawater showed that most of the petroleum pollutant (> 98%) was removed from the surface of seawater in 24 h. GC-MS analysis showed that most components of petroleum pollutants had been removed. This formula with immobilized bacteria and emulsion can be exploited further for the bioremediation of marine oil spills.

Enhanced Bioavailability and Microbial Biodegradation of Polystyrene in an Enrichment Derived from the Gut Microbiome of Tenebrio molitor (Mealworm Larvae)

As the global threat of plastic pollution has grown in scale and urgency, so have efforts to find sustainable and efficient solutions. Research conducted over the past few years has identified gut environments within insect larvae, including Tenebrio molitor (yellow mealworms), as microenvironments uniquely suited to rapid plastic biodegradation. However, there is currently limited understanding of how the insect host and its gut microbiome collaborate to create an environment conducive to plastic biodegradation. In this work, we provide evidence that T. molitor secretes one or more emulsifying factor(s) (30-100 kDa) that mediate plastic bioavailability. We also demonstrate that the insect gut microbiome secretes factor(s) (<30 kDa) that enhance respiration on polystyrene (PS). We apply these insights to culture PS-fed gut microbiome enrichments, with elevated rates of respiration and degradation compared to the unenriched gut microbiome. Within the enrichment, we identified eight unique gut microorganisms associated with PS biodegradation including Citrobacter freundii, Serratia marcescens, and Klebsiella aerogenes. Our results demonstrate that both the mealworm itself and its gut microbiome contribute to accelerated plastic biodegradation. This work provides new insights into insect-mediated mechanisms of plastic degradation and potential strategies for cultivation of plastic-degrading microorganisms in future investigations and scale-up.

Remediation of textile effluents for water reuse: Decolorization and desalination using Escherichia fergusonii followed by detoxification with activated charcoal

Textile effluents contain high levels of pollutants of different categories like dyes, metal salts, acids, bases and microorganisms. Remediation of textile effluents is often challenging because of its composition, which also varies between dyeing units. In this study, we demonstrate the novel use of a waste-water bacterium, Escherichia fergusonii, in the effective remediation of textile effluents. The bacteria application efficiently caused a reduction of color (98.4%), total dissolved solids (75%), sulphates (87%), bicarbonates (83%), chlorides (64%), calcium (84%), and chemical oxygen demand (81%) of the textile effluents. The bacteria-treated effluents were further disinfected and detoxified by treating with rice husk activated charcoal. After the charcoal treatment, the chemical oxygen demand decreased further by 11.5% and biochemical oxygen demand decreased by 85%. The effluents remediated using the two-step process were subjected to toxicity assays using zebrafish (Danio rerio) model. The textile effluents treated using Escherichia fergusonii, followed by activated charcoal were found to be non-toxic and suitable for reuse for domestic applications. Thus, we present here, a simple, less energy-intensive, economic, two-step process as a complete solution for textile effluent treatment. The results of this investigation can be used to simplify the remediation process of textile effluents in common treatment plants as well as the individual dyeing units.

Removal of high-molecular-weight polycyclic aromatic hydrocarbons by a microbial consortium immobilized in magnetic floating biochar gel beads

A bacterial consortium immobilized in magnetic floating biochar gel beads is proposed to remove high-molecular-weight polycyclic aromatic hydrocarbons. The microbial consortium performed better than single strains and consisted of four strains of marine bacteria for degrading pyrene (PYR), two strains for benzo(a)pyrene (BAP), and three strains for indeno(1,2,3-cd)pyrene (INP), which were isolated from oil-contaminated seawater. The immobilized cells could biodegrade 89.8%, 66.9% and 78.2% of PYR, BAP and INP, respectively, and had better tolerance to pH, temperature and salinity than free cells. The Andrews model was used to explore the biodegradation kinetics, and when the initial concentrations of PYR, BAP, and INP were 7.80, 3.05, and 3.41 mg/L, the specific biodegradation rates reached maximum values of 0.2507, 0.1286, and 0.1930 d^-1, respectively. The immobilized microbial consortium had a high HMW-PAH removal ability and good floatability and magnetic properties and could be collected by an external magnetic field.

Variation of Microbial Diversity in Catastrophic Oil Spill Area in Marine Ecosystem and Hydrocarbon Degradation of UCMs (Unresolved Complex Mixtures) by Marine Indigenous Bacteria

The study targeted an assessment of microbial diversity during oil spill in the marine ecosystem (Kaohsiung port, Taiwan) and screened dominant indigenous bacteria for oil degradation, as well as UCM weathering. DO was detected lower and TDS/conductivity was observed higher in oil-spilled area, compared to the control, where a significant correlation (R² = 1; P < 0.0001) was noticed between DO and TDS. The relative abundance (RA) of microbial taxa and diversities (> 90% similarity by NGS) were found higher in the boundary region of spilled-oily-water (site B) compared to the control (site C) and center of the oil spill area (site A) (B_RA/diversity > C_RA/diversity > A_RA/diversity). The isolated indigenous bacteria, such as Staphylococcus saprophyticus (CYCTW1), Staphylococcus saprophyticus (CYCTW2), and Bacillus megaterium (CYCTW3) degraded the C₁₀-C₃₀ including UCM of oil, where Bacillus sp. are exhibited more efficient, which are applicable for environmental cleanup of the oil spill area. Thus, the marine microbial diversity changes due to oil spill and the marine microbial community play an important role to biodegrade the oil, besides restoring the catastrophic disorders through changing their diversity by ecological selection and adaptation process.

Dynamics of coastal bacterial community average ribosomal RNA operon copy number reflect its response and sensitivity to ammonium and phosphate

The nutrient-rich effluent from wastewater treatment plants (WWTPs) constitutes a significant disturbance to coastal microbial communities, which in turn affect ecosystem functioning. However, little is known about how such disturbance could affect the community's stability, an important knowledge gap for predicting community response to future disturbances. Here, we examined dynamics of coastal sediment microbial communities with and without a history of WWTP's disturbances (named H1 and H0 hereafter) after simulated nutrient input loading at the low level (5 mg L^-1 NH₄⁺-N and 0.5 mg L^-1 PO₄^3--P) or high level (50 mg L^-1 NH₄⁺-N and 5.0 mg L^-1 PO₄^3--P) for 28 days. H0 community was highly sensitive to both low and high nutrient loading, showing a faster community turnover than H1 community. In contrast, H1 community was more efficient in nutrient removal. To explain it, we found that H1 community constituted more abundant and diversified r-strategists, known to be copiotrophic and fast in growth and reproduction, than H0 community. As nutrient was gradually consumed, both communities showed a succession of decreasing r-strategists. Accordingly, there was a decrease in community average ribosomal RNA operon (rrn) copy number, a recently established functional trait of r-strategists. Remarkably, the average rrn copy number of H0 communities was strongly correlated with NH₄⁺-N (R² = 0.515, P = 0.009 for low nutrient loading; R² = 0.749, P = 0.001 for high nutrient loading) and PO₄^3--P (R² = 0.378, P = 0.034 for low nutrient loading; R² = 0.772, P = 0.001 for high nutrient loading) concentrations, while that of H1 communities was only correlated with NH₄⁺-N at high nutrient loading (R² = 0.864, P = 0.001). Our results reveal the potential of using rrn copy number to evaluate the community sensitivity to nutrient disturbances, but community's historical contingency need to be taken in account.

Crude Oil Degrading Fingerprint and the Overexpression of Oxidase and Invasive Genes for n-hexadecane and Crude Oil Degradation in the Acinetobacter pittii H9-3 Strain

A crude oil-degrading bacterium named strain H9-3 was isolated from crude oil contaminated soil in the Northeastern area of China. Based on its morphological characteristics and 16S rDNA sequence analysis, strain H9-3 is affiliated to Acinetobacter pittii in the group of Gammaproteobacteria. The strain was efficient in removing 36.8% of the initial 10 g·L−1 of crude oil within 21 days. GC-MS was performed and a preference was shown for n-C10, n-C11, i-C14, i-C17, i-C34, n-C12, n-C13, n-C14, n-C27, n-C32 and i-C13, over n-C16, n-C18–C22, n-C24–n-C31, and n-C36. This can be regarded as the specific fingerprint for crude oil degradation by strain H9-3 of Acinetobacter pittii. In addition to crude oil, it was shown that soybean oil and phenols can be utilized as carbon sources by strain H9-3. It was also shown that aniline and α-naphthol cannot be utilized for growth, but they can be tolerated by strain H9-3. Methylbenzene was neither utilized nor tolerated by strain H9-3. Although n-hexadecane was not preferentially consumed by strain H9-3, during culture with crude oil, it could be utilized for growth when it is the sole carbon source. The degradation of some branched alkanes (i-C14, i-C17 and i-C34) and the preferential degradation of crude oil over phenols could be used as a reference for distinguishing A. pittii from A. calcoaceticus. The difference in gene expression was very significant and was induced by diverse carbon sources, as shown in the qRT-PCR results. The oxidation and adhesion events occurred at high frequency during alkane degration by Acinetobacter pittii strain H9-3 cells.

Extracellular polymeric substances (EPS) producing and oil degrading bacteria isolated from the northern Gulf of Mexico

Sinking marine oil snow was found to be a major mechanism in the transport of spilled oil from the surface to the deep sea following the Deepwater Horizon (DwH) oil spill. Marine snow formation is primarily facilitated by extracellular polymeric substances (EPS), which are mainly composed of proteins and carbohydrates secreted by microorganisms. While numerous bacteria have been identified to degrade oil, there is a paucity of knowledge on bacteria that produce EPS in response to oil and Corexit exposure in the northern Gulf of Mexico (nGoM). In this study, we isolated bacteria from surface water of the nGoM that grow on oil or Corexit dispersant. Among the 100 strains isolated, nine were identified to produce remarkable amounts of EPS. 16S rRNA gene analysis revealed that six isolates (strains C1, C5, W10, W11, W14, W20) belong to the genus Alteromonas; the others were related to Thalassospira (C8), Aestuariibacter (C12), and Escherichia (W13a). The isolates preferably degraded alkanes (17–77%), over polycyclic aromatic hydrocarbons (0.90–23%). The EPS production was determined in the presence of a water accommodated fraction (WAF) of oil, a chemical enhanced WAF (CEWAF), Corexit, and control. The highest production of visible aggregates was found in Corexit followed by CEWAF, WAF, and control; indicating that Corexit generally enhanced EPS production. The addition of WAF and Corexit did not affect the carbohydrate content, but significantly increased the protein content of the EPS. On the average, WAF and CEWAF treatments had nine to ten times more proteins, and Corexit had five times higher than the control. Our results reveal that Alteromonas and Thalassospira, among the commonly reported bacteria following the DwH spill, produce protein rich EPS that could have crucial roles in oil degradation and marine snow formation. This study highlights the link between EPS production and bacterial oil-degrading capacity that should not be overlooked during spilled oil clearance.

Dynamics of Sediment Microbial Functional Capacity and Community Interaction Networks in an Urbanized Coastal Estuary

Coastal estuaries and bays are exposed to both natural and anthropogenic environmental changes, inflicting intensive stress on the microbial communities inhabiting these areas. However, it remains unclear how microbial community diversity and their eco-functions are affected by anthropogenic disturbances rather than natural environmental changes. Here, we explored sediment microbial functional genes dynamics and community interaction networks in Hangzhou Bay (HZB), one of the most severely polluted bays on China’s eastern coast. The results indicated key microbial functional gene categories, including N, P, S, and aromatic compound metabolism, and stress response, displayed significant spatial dynamics along environmental gradients. Sensitive feedbacks of key functional gene categories to N and P pollutants demonstrated potential impacts of human-induced seawater pollutants to microbial functional capacity. Seawater ammonia and dissolved inorganic nitrogen (DIN) was identified as primary drivers in selecting adaptive populations and varying community composition. Network analysis revealed distinct modules that were stimulated in inner or outer bay. Importantly, the network keystone species, which played a fundamental role in community interactions, were strongly affected by N-pollutants. Our results provide a systematic understanding of the microbial compositional and functional dynamics in an urbanized coastal estuary, and highlighted the impact of human activities on these communities.

Biodegradation of marine oil spill residues using aboriginal bacterial consortium based on Penglai 19-3 oil spill accident, China

Bioremediation, mainly by indigenous bacteria, has been regarded as an effective way to deal with the petroleum pollution after an oil spill accident. The biodegradation of crude oil by microorganisms co-incubated from sediments collected from the Penglai 19-3 oil platform, Bohai Sea, China, was examined. The relative susceptibility of the isomers of alkylnaphthalenes, alkylphenanthrenes and alkyldibenzothiophene to biodegradation was also discussed. The results showed that the relative degradation values of total petroleum hydrocarbon (TPH) are 43.56% and 51.29% for sediments with untreated microcosms (S-BR1) and surfactant-treated microcosms (S-BR2), respectively. TPH biodegradation results showed an obvious decrease in saturates (biodegradation rate: 67.85-77.29%) and a slight decrease in aromatics (biodegradation rate: 47.13-57.21%), while no significant difference of resins and asphaltenes was detected. The biodegradation efficiency of alkylnaphthalenes, alkylphenanthrenes and alkyldibenzothiophene for S-BR1 and S-BR2 samples reaches 1.28-84.43% and 42.56-86.67%, respectively. The efficiency of crude oil degradation in sediment with surfactant-treated microcosms cultures added Tween 20, was higher than that in sediment with untreated microcosms. The biodegradation and selective depletion is not only controlled by thermodynamics but also related to the stereochemical structure of individual isomer compounds. Information on the biodegradation of oil spill residues by the bacterial community revealed in this study will be useful in developing strategies for bioremediation of crude oil dispersed in the marine ecosystem.

Biodegradation of hexadecane using sediments from rivers and lagoons of the Southern Gulf of Mexico

The Southern Gulf of Mexico is an area highly impacted by crude oil extraction, refining activities and the presence of natural petroleum seepage. Oceanic currents in the Gulf of Mexico continually facilitate the transport of hydrocarbons to lagoons and rivers. This research evaluated hexadecane (HXD) degradation in marine sediment samples from lagoons and rivers that are fed by the Southern Gulf of Mexico, specifically six samples from rivers, three samples from lagoons, and one sample from a marine outfall. The highest rates of biodegradation were observed in sediments from the mouths of the Gonzalez River and the Champotón Lagoon. The lowest consumption rate was found in sediment from the mouth of the Coatzacoalcos River. With regards to the Ostión Lagoon and the Grijalva River, there was a low rate of consumption, but a high efficiency of degradation which took place at the end of the experiments. No correlation was found between the consumption rate and the environmental physicochemical parameters.

Resistance of aerobic microorganisms and soil enzyme response to soil contamination with Ekodiesel Ultra fuel

This study determined the susceptibility of cultured soil microorganisms to the effects of Ekodiesel Ultra fuel (DO), to the enzymatic activity of soil and to soil contamination with PAHs. Studies into the effects of any type of oil products on reactions taking place in soil are necessary as particular fuels not only differ in the chemical composition of oil products but also in the composition of various fuel improvers and antimicrobial fuel additives. The subjects of the study included loamy sand and sandy loam which, in their natural state, have been classified into the soil subtype 3.1.1 Endocalcaric Cambisols. The soil was contaminated with the DO in amounts of 0, 5 and 10 cm³ kg^-1. Differences were noted in the resistance of particular groups or genera of microorganisms to DO contamination in loamy sand (LS) and sandy loam (SL). In loamy sand and sandy loam, the most resistant microorganisms were oligotrophic spore-forming bacteria. The resistance of microorganisms to DO contamination was greater in LS than in SL. It decreased with the duration of exposure of microorganisms to the effects of DO. The factor of impact (IF_DO) on the activity of particular enzymes varied. For dehydrogenases, urease, arylsulphatase and β-glucosidase, it had negative values, while for catalase, it had positive values and was close to 0 for acid phosphatase and alkaline phosphatase. However, in both soils, the noted index of biochemical activity of soil (BA) decreased with the increase in DO contamination. In addition, a positive correlation occurred between the degree of soil contamination and its PAH content.

Green technological approach to synthesis hydrophobic stable crystalline calcite particles with one-pot synthesis for oil-water separation during oil spill cleanup

The process of separating oil and water from oil/water mixtures is an attractive strategy to answer the menace caused by industrial oil spills and oily wastewater. In addition, water coproduced during hydrocarbon exploitation, which can be an economic burden and risk for freshwater resources, can become an important freshwater source after suitable water-oil separation. For oil-water separation purposes, considerable attention has been paid to the preparation of hydrophobic-oleophilic materials with modified surface roughness. However, due to issues of thermodynamic instability, costly and complex methods as well as lack of ecofriendly compounds, most of hydrophobic surface modified particles are of limited practical application. The study presents a facile procedure, to synthesize crystalline particles of calcite, which is the most stable polymorph of CaCO₃ from industrial CaCO₃ using oleic acid as an additive in a one-pot synthesis method. The XRD results show that the synthesized particles were a well-crystallized form of calcite. The FTIR results reflect the appearance of the alkyl groups from the oleic acid in synthesized particles which promotes the production of calcite with 'rice shape' (1.64 μm) (aggregated by spherical nanoparticle of 19.56 nm) morphology with concomitant changes in its surface wettability from hydrophilic to hydrophobic. The synthesized particles exhibited near to super hydrophobicity with ∼99% active ratio and a contact angle of 143.8°. The synthesized hydrophobic calcite particles had an oleophilic nature where waste diesel oil adsorption capacity of synthesized calcium carbonate (HCF) showed a very high (>99%) and fast (7 s) oil removal from oil-water mixture. The functional group of long alkyl chain including of CO bounds may play critical roles for adsorption of diesel oils. Moreover, the thermodynamically stable crystalline polymorph calcite (compared to vaterite) exhibited excellent recyclability. The isothermal study reflects the comparatively high value of correlation coefficient (R² = 0.94) for the Langmuir isotherm compared to those of the Freundlich isotherm (R² = 0.82) showed that the adsorption of diesel oil onto the hydrophobic CaCO₃ adsorbent was much better described by the Langmuir isotherm. The kinetics study of second-order rate expression (R² = 0.99) more fitted with the experimental data compare to first-order model (R² = 0.92). The synthesized calcite exhibited a significant dual oleophilic and hydrophobic nature that can be applicable for oil adsorption/or removal purpose in oil contaminated areas in environment and/or industrial oily wastewater for green, simple, and inexpensive environmental cleanup.

Biosurfactant production by Mucor circinelloides on waste frying oil and possible uses in crude oil remediation

Biosurfactants are biocompatible surface active agents which many microorganisms produce. This study investigated the production of biosurfactants by Mucor circinelloides. The effects of different factors on biosurfactant production, including carbon sources and concentrations, nitrogen sources, and iron (II) concentration, were studied and the optimum condition determined. Finally, the strain's ability to remove the crude oil and its relationship with biosurfactant production was evaluated. The results showed that M. circinelloides could reduce the surface tension of the culture medium to 26.6 mN/m and create a clear zone of 12.9 cm diameter in an oil-spreading test. The maximum surface tension reduction was recorded 3 days after incubation. The optimum condition for biosurfactant production was achieved in the presence of 8% waste frying oil as a carbon source, 2 g/L yeast extract as a nitrogen source, and 0.01 mM FeSO₄. M. circinelloides could consume 8% waste frying oil in 5 days of incubation, and 87.6% crude oil in 12 days of incubation. A direct correlation was observed between oil degradation and surface tension reduction in the first 3 days of fungal growth. The results showed that the waste frying oil could be recommended as an inexpensive oily waste substance for biosurfactant production, and M. circinelloides could have the potential to treat waste frying oil. According to the results, the produced crude biosurfactant or fungal strain could be directly used for the mycoremediation of crude oil contamination in oil fields.

Assessing the biodegradation of polycyclic aromatic hydrocarbons and laccase production by new fungus Trematophoma sp. UTMC 5003

Environmental pollution caused by petroleum compounds has become a global concern. The aim of this study was to evaluate the indigenous fungal isolates in Iran for biodegradation of crude oil pollutants. In order to isolate fungal strains, the soil samples were enriched in minimal salts medium (MSM) with 1% crude oil and then the crude oil degradation was measured by total petroleum hydrocarbon (TPH) assay. The degradation of hydrocarbons compounds was also analysed by FT-IR and HPLC, and the activity of peroxidase enzyme and biosurfactant production were also measured. We isolated 40 fungal strains and selected the isolate G-05 with 70% degradation ability of petroleum hydrocarbons as a premium isolate after 15 days. Residual crude oil analysis with FT-IR spectrophotometry and HPLC showed that G-05 is able to degrade 90 and 100% of aliphatic compounds and some polycyclic aromatic hydrocarbons (PAH), respectively. Evaluation of enzymatic activity showed that this isolate can produce 4 U L^-1 of Laccase enzyme for oil removal; it is capable of producing biosurfactant and reducing the surface tension of the medium to 25.95 ± 0.1 m Nm^-1. This strain was identified as a member of Trematophoma genus and the obtained results showed that this strain is a highly potent strain in bioremediation of soils contaminated by crude oil.

Study on the biodegradation of crude oil by free and immobilized bacterial consortium in marine environment

Five strains of bacteria, namely, Exiguobacterium sp. ASW-1, Pseudomonas aeruginosa strain ASW-2, Alcaligenes sp. ASW-3, Alcaligenes sp. ASS-1, and Bacillus sp. ASS-2, were isolated from the Zhejiang coast in China. The mixed flora of the five strains performed well with degrading 75.1% crude oil (1%, w/v) in 7 days. The calcium alginate—activated carbon embedding carrier was used to immobilize bacterial consortium. Immobilized cells performed better than free ones in variations of environmental factors containing incubated temperature, initial pH, salinity of the medium and crude oil concentration. The degradation process of crude oil by immobilized bacteria was accelerated compared with that of the free ones. Bacterial consortium showed better performance on biodegradation of normal alkanes than that of PAHs. Improvement of immobilization on the biodegradation efficiency of normal alkanes (31.9%) was apparently high than that of PAHs (1.9%).

Characterization of Biosurfactant Produced during Degradation of Hydrocarbons Using Crude Oil As Sole Source of Carbon

Production and spillage of petroleum hydrocarbons which is the most versatile energy resource causes disastrous environmental pollution. Elevated oil degrading performance from microorganisms is demanded for successful microbial remediation of those toxic pollutants. The employment of biosurfactant-producing and hydrocarbon-utilizing microbes enhances the effectiveness of bioremediation as biosurfactant plays a key role by making hydrocarbons bio-available for degradation. The present study aimed the isolation of a potent biosurfactant producing indigenous bacteria which can be employed for crude oil remediation, along with the characterization of the biosurfactant produced during crude oil biodegradation. A potent bacterial strain Pseudomonas aeruginosa PG1 (identified by 16s rDNA sequencing) was isolated from hydrocarbon contaminated soil that could efficiently produce biosurfactant by utilizing crude oil components as the carbon source, thereby leading to the enhanced degradation of the petroleum hydrocarbons. Strain PG1 could degrade 81.8% of total petroleum hydrocarbons (TPH) after 5 weeks of culture when grown in mineral salt media (MSM) supplemented with 2% (v/v) crude oil as the sole carbon source. GCMS analysis of the treated crude oil samples revealed that P. aeruginosa PG1 could potentially degrade various hydrocarbon contents including various PAHs present in the crude oil. Biosurfactant produced by strain PG1 in the course of crude oil degradation, promotes the reduction of surface tension (ST) of the culture medium from 51.8 to 29.6 mN m⁻¹, with the critical micelle concentration (CMC) of 56 mg L⁻¹. FTIR, LC-MS, and SEM-EDS studies revealed that the biosurfactant is a rhamnolipid comprising of both mono and di rhamnolipid congeners. The biosurfactant did not exhibit any cytotoxic effect to mouse L292 fibroblastic cell line, however, strong antibiotic activity against some pathogenic bacteria and fungus was observed.

Isolation and characterization of PAH-degrading bacteria from the Eastern Province, Saudi Arabia

Contaminated sediment samples were collected from the Eastern Province, Saudi Arabia for isolation of pyrene- and phenanthrene-degrading bacteria by enrichment method. Four isolates were morphologically characterized as Gram-negative rod strains and 16S rRNA sequence analysis revealed the isolates as closely related to Pseudomonas aeruginosa, P. citronellolis, Ochrobactrum intermedium and Cupriavidus taiwanensis. Degradation of the polycyclic aromatic hydrocarbons (PAHs) by the latter three strains was investigated in liquid cultures. Results of concentration reduction analyzed with gas chromatography show that P. citronellolis_LB was efficient in removing phenanthrene, degrading 94% of 100ppm in 15days while O. intermedium_BC1 was more efficient in pyrene-removal, degrading 62% in 2weeks. Furthermore, bacterial growth assessment using optical density and population counts revealed the latter as more suitable for microbial growth analysis in PAH-containing cultures. In conclusion, the isolated bacterial strains could be further developed for efficient use in biodegradation of PAH.

Corrosion of carbon steel induced by a microbial-enhanced oil recovery bacterium Pseudomonas sp. SWP-4

Pseudomonas sp. SWP-4 has been proved to enhance oil recovery effectively.

Effect of low-concentration rhamnolipid biosurfactant on Pseudomonas aeruginosa transport in natural porous media

The effect of low-concentrations of monorhamnolipid biosurfactant on transport of Pseudomonas aeruginosa ATCC 9027 in natural porous media (silica sand and a sandy soil) was studied with miscible-displacement experiments using artificial groundwater as the background solution. Transport of two types of cells was investigated, glucose- and hexadecane-grown cells with lower and higher cell surface hydrophobicity (CSH), respectively. The effect of hexadecane presence as a residual non-aqueous phase liquid (NAPLs) on transport was also examined. A clean-bed colloid deposition model was used to calculate deposition rate coefficients (k) for quantitative assessment. Significant cell retention was observed in the sand (81% and 82% for glucose- and hexadecane-grown cells, respectively). Addition of a low-concentration rhamnolipid solution enhanced cell transport, with 40 mg/L of rhamnolipid reducing retention to 50% and 60% for glucose- and hexadecane-grown cells, respectively. The k values for both glucose- and hexadecane-grown cells correlate linearly with rhamnolipid-dependent CSH represented as bacterial-adhesion-to-hydrocarbon rate of cells. Retention of cells by the soil was nearly complete (>99%). Addition of 40 mg/L rhamnolipid solution reduced retention to 95%. The presence of NAPLs in the sand increased the retention of hexadecane-grown cells with higher CSH. Transport of cells in the presence of the NAPL was enhanced by rhamnolipid at all concentrations tested, and the relative enhancement was greater than in was in the absence of NAPL. This study shows the importance of hydrophobic interaction on bacterial transport in natural porous media and the potential of using low-concentration rhamnolipid for facilitating the transport in subsurface for bioaugmentation efforts.

Horizontal gene transfer versus biostimulation: A strategy for bioremediation in Goa

Bioaugmentation, Biostimulation and Horizontal gene transfer (HGT) of catabolic genes have been proven for their role in bioremediation of hydrocarbons. It also has been proved that selection of either biostimulation or bioremediation varies for every contaminated site. The reliability of HGT compared to biostimulation and bioremediation was not tested. The present study focuses on reliability of biostimulatiion, bioaugmentation and HGT during biodegradation of Diesel oil and Non aqueous phase liquids (NAPL). Pseudomonas aeruginosa (AEBBITS1) having alkB and NDO genes was used for bioaugmentation and the experiment was conducted using seawater as medium. Based on Gas chromatography results diesel was found to be degraded to 100% in both presence and absence of AEBBITS1. Denturing gradient gel electrophoresis result showed same pattern in presence and absence of AEBBITS1 indicating no HGT. NAPL degradation was found to be more by Biostimulated Bioaugmentation compared to biostimulation and bioaugmentation alone. This proves that biostimulated bioaugmentation is better strategy for oil contamination (tarabll) in Velsao beach, Goa.

Rhamnolipids Produced by Indigenous Acinetobacter junii from Petroleum Reservoir and its Potential in Enhanced Oil Recovery

Biosurfactant producers are crucial for incremental oil production in microbial enhanced oil recovery (MEOR) processes. The isolation of biosurfactant-producing bacteria from oil reservoirs is important because they are considered suitable for the extreme conditions of the reservoir. In this work, a novel biosurfactant-producing strain Acinetobacter junii BD was isolated from a reservoir to reduce surface tension and emulsify crude oil. The biosurfactants produced by the strain were purified and then identified via electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR-MS). The biosurfactants generated by the strain were concluded to be rhamnolipids, the dominant rhamnolipids were C26H48O9, C28H52O9, and C32H58O13. The optimal carbon source and nitrogen source for biomass and biosurfactant production were NaNO3 and soybean oil. The results showed that the content of acid components increased with the progress of crude oil biodegradation. A glass micromodel test demonstrated that the strain significantly increased oil recovery through interfacial tension reduction, wettability alteration and the mobility of microorganisms. In summary, the findings of this study indicate that the newly developed BD strain and its metabolites have great potential in MEOR.

Influence of soil contamination with PAH on microbial community dynamics and expression level of genes responsible for biodegradation of PAH and production of rhamnolipids

The aim of this study was to evaluate the effect of bioaugmentation and addition of rhamnolipids on the biodegradation of PAHs in artificially contaminated soil, expression of genes crucial for the biodegradation process (PAHRHDαGN, PAHRHDαGP), and the synthesis of rhamnolipids as well as population changes in the soil bacterial metabiome. The positive effect of bioaugmentation and addition of rhamnolipids on the bioremediation of the majority of PAHs was confirmed during the early stages of treatment, especially in case of the most structurally complicated compounds. The results of metagenomic analysis indicated that the initial changes in the soil metabiome caused by bioaugmentation diminished after 3 months and that the community structure in treated soil was similar to control. The survival period of bacteria introduced into the soil via bioaugmentation reached a maximum of 3 months. The increased expression of genes observed after addition of PAH into the soil also returned to the initial conditions after 3 months.

Biodegradation of marine crude oil pollution using a salt-tolerant bacterial consortium isolated from Bohai Bay, China

This study aims at constructing an efficient bacterial consortium to biodegrade crude oil spilled in China's Bohai Sea. In this study, TCOB-1 (Ochrobactrum), TCOB-2 (Brevundimonas), TCOB-3 (Brevundimonas), TCOB-4 (Bacillus) and TCOB-5 (Castellaniella) were isolated from Bohai Bay. Through the analysis of hydrocarbon biodegradation, TCOB-4 was found to biodegrade more middle-chain n-alkanes (from C17 to C23) and long-chain n-alkanes (C31-C36). TCOB-5 capable to degrade more n-alkanes including C24-C30 and aromatics. On the basis of complementary advantages, TCOB-4 and TCOB-5 were chosen to construct a consortium which was capable of degrading about 51.87% of crude oil (2% w/v) after 1week of incubation in saline MSM (3% NaCl). It is more efficient compared with single strain. In order to biodegrade crude oil, the construction of bacterial consortia is essential and the principle of complementary advantages could reduce competition between microbes.

Influence of thermophilic Bacillus subtilis YB7 on the biodegradation of long chain paraffinic hydrocarbons (C16H34 to C36H74)

The long chain paraffinic hydrocarbons (waxes) present in crude oil pose serious issues in the upstream oil and gas industries.

Mass culture strategy for bacterial yeast co-culture for degradation of petroleum hydrocarbons in marine environment

In the present study a metabolically versatile co-culture with two Bacilli and one yeast strain was developed using enrichment culture techniques. The developed co-culture had affinity to degrade both aliphatic and aromatic fractions of petroleum crude oil. Degradation kinetics was established for designing the fermentation protocol of the co-culture. The developed mass culture strategy led to achieve the reduction in surface tension (26dynescm(-1) from 69 dynescm(-1)) and degradation of 67% in bench scale experiments. The total crude oil degradation of 96% was achieved in 4000l of natural seawater after 28days without adding any nutrients. The survival of the augmented co-culture was maintained (10(9)cellsml(-1)) in contaminated marine environment. The mass culture protocol devised for the bioaugmentation was a key breakthrough that was subsequently used for pilot scale studies with 100l and 4000l of natural seawater for potential application in marine oil spills.

Marine Oil-Degrading Microorganisms and Biodegradation Process of Petroleum Hydrocarbon in Marine Environments: A Review

Due to the toxicity of petroleum compounds, the increasing accidents of marine oil spills/leakages have had a significant impact on our environment. Recently, different remedial techniques for the treatment of marine petroleum pollution have been proposed, such as bioremediation, controlled burning, skimming, and solidifying. (Hedlund and Staley in Int J Syst Evol Microbiol 51:61-66, 2001). This review introduces an important remedial method for marine oil pollution treatment-bioremediation technique-which is considered as a reliable, efficient, cost-effective, and eco-friendly method. First, the necessity of bioremediation for marine oil pollution was discussed. Second, this paper discussed the species of oil-degrading microorganisms, degradation pathways and mechanisms, the degradation rate and reaction model, and the factors affecting the degradation. Last, several suggestions for the further research in the field of marine oil spill bioremediation were proposed.

Adsorption-synergic biodegradation of diesel oil in synthetic seawater by acclimated strains immobilized on multifunctional materials

Using enrichment culture technique, three isolates marked as ODB-1, ODB-2 and ODB-3, were selected from oil contaminated seawater. 16S rDNA gene sequencing indicated that ODB-1 affiliated with Pseudomonas sp. while ODB-2 and ODB-3 affiliated with Brevundimonas sp. Subsequently, the bacterial cells were immobilized on the surface of expanded graphite (EG), expanded perlite (EP) and bamboo charcoal (BC). Among the three isolates, ODB-1 showed a strong binding to the bio-carriers through extracellular polysaccharides, while ODB-2 and ODB-3 made the adhesion to bio-carrier through direct physical adsorption. The immobilized bacteria exhibited good salinity tolerance compared with the planktonic bacteria. Their total diesel oil removal rates were more than 85% after 6 days' incubation. Adsorption-biodegradation process played an important role in the oil-pollution remediation. EG-bacteria system was treated as a promising remediation method, which achieved nearly 100% removal of diesel oil. Thereinto, over 83% removal of diesel oil owed to biodegradation.

Biodegradation of aliphatic hydrocarbons in the presence of hydroxy cucurbit[6]uril

Aliphatic hydrocarbons are one of the major environmental pollutants with reduced bioavailability. The present study focuses on the effect of hydroxy cucurbit[6]uril on the bioavailability of hydrocarbons. A bacterial consortium was used for biodegradation studies under saline and non-saline conditions. Based on denaturing gradient gel electrophoresis results it was found that the consortium under saline conditions had two different strains. The experiment was conducted in microcosms with tetradecane, hexadecane, octadecane and mixture of the mentioned hydrocarbons as the sole carbon source. The residual hydrocarbon was quantified using gas chromatography every 24h. It was found that biodegradation of tetradecane and hexadecane, as individual carbon source increased in the presence of hydroxy CB[6], probably due to the increase in their bioavailability. In case of octadecane this did not happen. Bioavailability of all three aliphatic hydrocarbons was increased when provided as a mixture to the consortium under saline conditions.

Escherichia fergusonii

Escherichia fergusonii was introduced in the genus Escherichia almost 65 years later than Escherichia coli after which the genus was named. From then (1985) onwards mainly case reports on E. fergusonii associated with disease in individuals of veterinary or human origin have been reported and only very few more extensive studies became available. This has resulted in very fragmented knowledge on this organism. The aim of this manuscript is to give an overview of what is known on E. fergusonii today and to stimulate more research on this organism so that better insight can be obtained in the role that E. fergusonii plays in human and animal infections.