Accumulation of quaternary ammonium compounds as emerging contaminants in sediments collected from the Pearl River Estuary, China and Tokyo Bay, Japan

Development and evaluation of amine-functionalized β-cyclodextrin grafted starch as a natural flocculant for turbidity removal in water treatment

Recently, biopolymers have been used as coagulants/flocculants due to their biodegradability, low cost, and renewability. In this study, an environmentally friendly amine-functionalized starch-based flocculant was successfully prepared. Initially, β-cyclodextrin was grafted onto the starch backbone to increase the number of hydroxyl groups, and this composite was named CD-starch. Subsequently, in order to introduce cationic properties and enhance effective flocculation, CD-starch was modified using amine functional groups. The surface functional groups were engineered by introducing different amine to CD-starch ratios (0.5:1, 1:1, 2:1 w/w), named A-CD-starch 0.5, 1 and 2, respectively. Following the characterization of the synthesized substrate, its performance in the flocculation process of a kaolin suspension was investigated. The effects of different parameters, including pH, flocculant dosage, and initial turbidity on wastewater turbidity removal, was investigated. The results showed that a higher ratio of amine to CD-starch leads to a better amination reaction due to the greater availability of nitrogen for alkylation. Jar experiments showed that for initial turbidities of 50, 150 and 300 NTU, the appropriate doses of flocculant were 0.070, 0.085 and 0.130 mg/mL, respectively. For these initial turbidities, the maximum turbidity removal was achieved 80.1 %, 92 %, and 97.8 %, respectively. This work provides an innovative natural flocculant based on starch which can effectively treat turbid wastewaters.

Distribution and Characterization of Quaternary Ammonium Biocides Resistant Bacteria in Different Soils, in South-Western China

Quaternary ammonium compounds (QACs) are active ingredients in hundreds of disinfectants for controlling the epidemic of infectious diseases like SARS-CoV-2 (COVID-19), and are also widely used in shale gas exploitation. The occurrence of QAC-resistant bacteria in the environment could enlarge the risk of sterilization failure, which is not fully understood. In this study, QAC-resistant bacteria were enumerated and characterized in 25 soils collected from shale gas exploitation areas. Total counts of QAC-resistant bacteria ranged from 6.81 × 103 to 4.48 × 105 cfu/g, accounting for 1.59% to 29.13% of the total bacteria. In total, 29 strains were further purified and identified as Lysinibacillus, Bacillus, and Klebsiella genus. There, bacteria covering many pathogenic bacteria showed different QACs tolerance with MIC (minimum inhibition concentration) varying from 4 mg/L to 64 mg/L and almost 58.6% of isolates have not previously been found to tolerate QACs. Meanwhile, the QAC-resistant strains in the produced water of shale gas were also identified. Phylogenetic trees showed that the resistant species in soil and produced water are distinctly different. That is the first time the distribution and characterization of QAC-resistant bacteria in the soil environment has been analyzed.

Triethanolamine-based esterquat in sediments: New analytical method, environmental occurrence, and homologue composition

The cationic surfactant triethanolamine-based esterquat (TEAQ) is a main ingredient in commercial fabric softeners and is produced and used in large quantities. However, little information is available for its occurrence in the environment, particularly in sediments. Here, we developed an analytical method for quantifying TEAQ in sediment and investigated TEAQ contamination in Japanese river and lake sediments. In our analytical method, TEAQ concentrations were measured by liquid chromatography-tandem mass spectrometry using a polymer-based size-exclusion column, which resulted in excellent peak shapes. TEAQ was detected at significant levels in procedural blanks, resulting in a method limit of detection in the sediment of 8.9-97 μg/kg-dry for TEAQ monoesters and 0.6-24 μg/kg-dry for TEAQ diesters. TEAQ was detected in 22 out of 26 sediment samples, with the sum of all homologue concentrations being up to 1340 μg/kg-dry. The concentration of TEAQ in sediments was high at locations where the concentrations of benzalkoniums and the organic carbon content were also high. TEAQ was detected in 8 out of 14 commercial fabric softeners at concentrations of 1.7-7.4 wt%. TEAQ homologues containing only saturated fatty acids accounted for 83 ± 5% of the total TEAQ in the sediments, whereas those with unsaturated fatty acids accounted for 71 ± 14% of the total TEAQ in a commercial technical mixture and the softener products. The results of this study will be useful for the environmental risk assessment of esterquats.

Screening for frequently detected quaternary ammonium mixture systems in waters based on frequent itemset mining and prediction of their toxicity

Screening and prioritizing research on frequently detected mixture systems in the environment is of great significance, as conducting toxicity testing on all mixtures is impractical. Therefore, the frequent itemset mining (FIM) was introduced and applied in this paper to identify variables that commonly co-occur in a dataset. Based on the dataset of the quaternary ammonium compounds (QACs) in the water environment, the four frequent QAC mixture systems with detection rate ≥ 35 % were found, including [BDMM]+Cl--[BTMM]+Cl- (M1), [BDMM]+Cl--[BHMM]+Cl- (M2), [BTMM]+Cl- -[BHMM]+Cl- (M3), and [BDMM]+Cl--[BTMM]+Cl--[BHMM]+Cl- (M4). [BDMM]+Cl-, [BTMM]+Cl-, and [BHMM]+Cl- are benzyl dodecyl dimethyl ammonium chloride, benzyl tetradecyl dimethyl ammonium chloride, and benzyl hexadecyl dimethyl ammonium chloride, respectively. Then, the toxicity of the representative mixture rays and components for the four frequently detected mixture systems was tested using Vibrio qinghaiensis sp.-Q67 (Q67) as a luminescent indicator organism at 0.25 and 12 h. The toxicity of the mixtures was predicted using concentration addition (CA) and independent action (IA) models. It was shown that both the components and the representative mixture rays for the four frequently detected mixture systems exhibited obvious acute and chronic toxicity to Q67, and their median effective concentrations (EC50) were below 7 mg/L. Both CA and IA models predicted the toxicity of the four mixture systems well. However, the CA model had a better predictive ability for the toxicity of the M3 and M4 mixtures than IA at 12 h.

Emerging contaminants and their potential impacts on estuarine ecosystems: Are we aware of it?

Emerging contaminants (ECs) are becoming more prevalent in estuaries and constitute a danger to both human health and ecosystems. These pollutants can infiltrate the ecosystem and spread throughout the food chain. Because of the diversified sources and extensive human activities, estuaries are particularly susceptible to increased pollution levels. A thorough review on recent ECs (platinum group elements, pharmaceuticals and personal care products, pesticides, siloxanes, liquid crystal monomers, cationic surfactant, antibiotic resistance genes, and microplastics) in estuaries, including their incidence, detection levels, and toxic effects, was performed. The inclusion of studies from different regions highlights the global nature of this issue, with each location having its unique set of contaminants. The diverse range of contaminants detected in estuary samples worldwide underscores the intricacy of ECs. A significant drawback is the scarcity of research on the toxic mechanisms of ECs on estuarine organisms, the prospect of unidentified ECs, warrant research scopes.

An exposure assessment of 27 quaternary ammonium compounds in pet dogs and cats from New York State, USA

Benzylalkyldimethylammonium (BACs), dialkyldimethylammonium (DDACs), and alkyltrimethylammonium compounds (ATMACs) are quaternary ammonium compounds (QACs) used widely as biocides, disinfectants, and sanitizers. Owing to their toxicity, human exposure to this class of chemicals is a concern. Pet animals are sentinels of human exposure to several indoor environmental chemicals. For the first time, we measured 7 BACs, 6 DDACs, 6 ATMACs, and 8 metabolites of BACs in urine and feces of pet dogs and cats from New York State, USA. We found widespread occurrence of QACs in feces, with median concentration of ∑All (sum concentration of all 27 QAC analytes) at 9680 and 1260 ng/g dry weight (dw) in dog and cat feces, respectively. BACs were the most abundant compounds among the four types of QACs, accounting for 64 % and 57 % of ∑All in dog and cat feces, respectively, followed by DDACs (33 % and 34 %, respectively), ATMACs (4 % and 9 %, respectively), and BAC metabolites (0.2 % and 0.3 %, respectively). However, in urine, only ω-carboxylic acid metabolites of BACs were found at median concentrations at 2.08 and 0.28 ng/mL in dogs and cats, respectively. Samples collected from animal shelters contained elevated levels of QACs than those from homes of pet owners. A significant positive correlation was found among the four types of QACs analyzed, which suggested usage of these chemicals in combination as mixtures. Based on the concentrations measured in feces, and through a reverse dosimetry approach, the median cumulative daily intakes (CDIs) of QACs were estimated to be 49.4 and 4.75 µg/kg body weight (BW)/day for dogs and cats, respectively. This study provides first evidence that pet dogs and cats are exposed to QACs at significant levels that warrant further attention.

High-Resolution Mass Spectrometry Screening of Quaternary Ammonium Compounds (QACs) in Dust from Homes and Various Microenvironments in South China

Despite their ubiquitous use, information regarding the presence of quaternary ammonium compounds (QACs) in various microenvironments remains scarce and only a small subset of QACs has been monitored using targeted chemical analysis. In this study, a total of 111 dust samples were collected from homes and various public settings in South China during the COVID-19 pandemic and were analyzed for traditional and emerging QACs using high-resolution mass spectrometry. The total traditional QAC concentrations in residential dust (∑traditional QAC, sum of 18 traditional QACs) ranged from 13.8 to 150 μg/g with a median concentration of 42.2 μg/g. Twenty-eight emerging QACs were identified in these samples, and the composition of ∑emerging QAC (sum of emerging QACs) to ∑QAC (sum of traditional and emerging QACs) ranged from 19 to 42% across various microenvironments, indicating the widespread existence of emerging QACs in indoor environments. Additionally, dust samples from cinemas exhibited higher ∑QAC concentrations compared to homes (medians 65.9 μg/g vs 58.3 μg/g, respectively), indicating heavier emission sources of QACs in these places. Interestingly, significantly higher ∑QAC concentrations were observed in dust from the rooms with carpets than those without (medians 65.6 μg/g vs 32.6 μg/g, p < 0.05, respectively). Overall, this study sheds light on the ubiquitous occurrence of QACs in indoor environments in South China.

Risks of benzalkonium chlorides as emerging contaminants in the environment and possible control strategies from the perspective of ecopharmacovigilance

An unprecedented increase in the use of disinfection products triggered by the coronavirus disease 2019 (COVID-19) pandemic is resulting in aggravating environmental loads of disinfectants as emerging contaminants, which has been considered a cause for worldwide secondary disasters. This review analyzed the literature published in the last decade about occurrence, bioaccumulation, and possible environmental risks of benzalkonium chlorides (BKCs) as emerging contaminants. Results indicated that BKCs globally occurred in municipal wastewater, surface water, groundwater, reclaimed water, sludge, sediment, soil, roof runoff, and residential dust samples across 13 countries. The maximum residual levels of 30 mg/L and 421 μg/g were reported in water and solid environmental samples, respectively. Emerging evidences suggested possible bioaccumulation of BKCs in plants, even perhaps humans. Environmentally relevant concentrations of BKCs exert potential adverse impacts on aquatic and terrestrial species, including genotoxicity, respiratory toxicity, behavioural effects and neurotoxicity, endocrine disruption and reproductive impairment, phytotoxicity, etc. Given the intrinsic biocidal and preservative properties of disinfectants, the inductive effects of residual BKCs in environment in terms of resistance and imbalance of microorganisms have been paid special attention. Considering the similarities of disinfectants to pharmaceuticals, from the perspective of ecopharmacovigilance (EPV), a well-established strategy for pharmaceutical emerging contaminants, we use the control of BKC pollution as a case, and provide some recommendations for employing the EPV measures to manage environmental risks posed by disinfectant emerging contaminants.

Efficient degradation of benzalkonium chloride by FeMn-CA300 catalyst activated persulfate process: Surface hydroxyl potentiation mechanism and degradation pathway

The consumption of disinfectants increased dramatically with the outbreak of the COVID-19 epidemic. Benzalkonium chloride (DDBAC), a cationic surfactant disinfectant for import and export cargoes, is used for effective degradation method. For DDBAC effective degradation, polyhedral Fe-Mn bimetallic catalyst of Prussian blue analogue (FeMn-CA300) was novelty developed for rapid peroxymonosulfate (PMS) activation. Results showed that the Fe/Mn redox and surface hydroxyl groups in the catalyst played an important role in the DDBAC-enhanced degradation. The removal effectiveness of 10 mg L-1 DDBAC was up to 99.4% in 80 min under the initial pH = 7, catalyst dosage of 0.4 g L-1, and PMS concentration of 15 mmol L-1. In addition, FeMn-CA300 had a wide pH applicability range. The results indicated that hydroxyls, sulfate radicals, and singlet oxygen could effectively improve the degradation efficiency, where sulfate radicals played a crucial role. Finally, the corresponding degradation path of DDBAC was further provided according to GC-MS results. The results of this study provide new insights into the degradation of DDBAC, thereby highlighting the great potential of FeMnca300/PMS to control refractory organic compounds in the aqueous phase.

Quaternary Ammonium Compounds: A Chemical Class of Emerging Concern

Quaternary ammonium compounds (QACs), a large class of chemicals that includes high production volume substances, have been used for decades as antimicrobials, preservatives, and antistatic agents and for other functions in cleaning, disinfecting, personal care products, and durable consumer goods. QAC use has accelerated in response to the COVID-19 pandemic and the banning of 19 antimicrobials from several personal care products by the US Food and Drug Administration in 2016. Studies conducted before and after the onset of the pandemic indicate increased human exposure to QACs. Environmental releases of these chemicals have also increased. Emerging information on adverse environmental and human health impacts of QACs is motivating a reconsideration of the risks and benefits across the life cycle of their production, use, and disposal. This work presents a critical review of the literature and scientific perspective developed by a multidisciplinary, multi-institutional team of authors from academia, governmental, and nonprofit organizations. The review evaluates currently available information on the ecological and human health profile of QACs and identifies multiple areas of potential concern. Adverse ecological effects include acute and chronic toxicity to susceptible aquatic organisms, with concentrations of some QACs approaching levels of concern. Suspected or known adverse health outcomes include dermal and respiratory effects, developmental and reproductive toxicity, disruption of metabolic function such as lipid homeostasis, and impairment of mitochondrial function. QACs' role in antimicrobial resistance has also been demonstrated. In the US regulatory system, how a QAC is managed depends on how it is used, for example in pesticides or personal care products. This can result in the same QACs receiving different degrees of scrutiny depending on the use and the agency regulating it. Further, the US Environmental Protection Agency's current method of grouping QACs based on structure, first proposed in 1988, is insufficient to address the wide range of QAC chemistries, potential toxicities, and exposure scenarios. Consequently, exposures to common mixtures of QACs and from multiple sources remain largely unassessed. Some restrictions on the use of QACs have been implemented in the US and elsewhere, primarily focused on personal care products. Assessing the risks posed by QACs is hampered by their vast structural diversity and a lack of quantitative data on exposure and toxicity for the majority of these compounds. This review identifies important data gaps and provides research and policy recommendations for preserving the utility of QAC chemistries while also seeking to limit adverse environmental and human health effects.

Evaluating the spatial and temporal distribution of emerging contaminants in the Pearl River Basin for regulating purposes

Little information is available on how the types, concentrations, and distribution of chemicals have evolved over the years. The objective of the present study is therefore to review the spatial and temporal distribution profile of emerging contaminants with limited toxicology data in the pearl river basin over the years to build up the emerging contaminants database in this region for risk assessment and regulatory purposes. The result revealed that seven groups of emerging contaminants were abundant in this region, and many emerging contaminants had been detected at much higher concentrations before 2011. Specifically, antibiotics, phenolic compounds, and acidic pharmaceuticals were the most abundant emerging contaminants detected in the aquatic compartment, while phenolic compounds were of the most profound concern in soil. Flame retardants and plastics were the most frequently studied chemicals in organisms. The abundance of the field concentrations and frequencies varied considerably over the years, and currently available data can hardly be used for regulation purposes. It is suggested that watershed management should establish a regular monitoring scheme and comprehensive database to monitor the distribution of emerging contaminants considering the highly condensed population in this region. The priority monitoring list should be formed in consideration of historical abundance, potential toxic effects of emerging contaminants as well as the distribution of heavily polluting industries in the region.

Pronounced temporal changes in soil microbial community and nitrogen transformation caused by benzalkonium chloride

As one typical cationic disinfectant, quaternary ammonium compounds (QACs) were approved for surface disinfection in the coronavirus disease 2019 pandemic and then unintentionally or intentionally released into the surrounding environment. Concerningly, it is still unclear how the soil microbial community succession happens and the nitrogen (N) cycling processes alter when exposed to QACs. In this study, one common QAC (benzalkonium chloride (BAC) was selected as the target contaminant, and its effects on the temporal changes in soil microbial community structure and nitrogen transformation processes were determined by qPCR and 16S rRNA sequencing-based methods. The results showed that the aerobic microbial degradation of BAC in the two different soils followed first-order kinetics with a half-life (4.92 vs. 17.33 days) highly dependent on the properties of the soil. BAC activated the abundance of N fixation gene (nifH) and nitrification genes (AOA and AOB) in the soil and inhibited that of denitrification gene (narG). BAC exposure resulted in the decrease of the alpha diversity of soil microbial community and the enrichment of Crenarchaeota and Proteobacteria. This study demonstrates that BAC degradation is accompanied by changes in soil microbial community structure and N transformation capacity.

Quaternary ammonium compounds of emerging concern: Classification, occurrence, fate, toxicity and antimicrobial resistance

Amplified hygiene and precautionary measures are of utmost importance to control the spread of COVID-19 and future infection; however, these changes in practice are projected to trigger a rise in the purchase, utilisation and hence, discharge of many disinfectants into the environment. While alcohol-based, hydrogen peroxide-based, and chlorine-based compounds have been used widely, quaternary ammonium compounds (QACs) based disinfectants are of significant concern due to their overuse during this pandemic. This review presents the classification of disinfectants and their mechanism of action, focusing on QACs. Most importantly, the occurrence, fate, toxicity and antimicrobial resistance due to QACs are covered in this paper. Here we collated evidence from multiple studies and found rising trends of concern, including an increase in the mass load of QACs at a wastewater treatment plant (WWTP) by 331% compared to before the COVID-19 pandemic, as well as an increases in the concentration of 62% in residential dust, resulting in high concentrations of QACs in human blood and breast milk and suggesting that these could be potential sources of persistent QACs in infants. In addition to increased toxicity to human and aquatic life, increased use of QACs and accelerated use of antibiotics and antimicrobials during the COVID-19 pandemic could multiply the threat to antimicrobial resistance.

LC-MS/MS methods for the determination of 30 quaternary ammonium compounds including benzalkonium and paraquat in human serum and urine

Benzalkyldimethylammonium (or benzalkonium; BACs), alkyltrimethylammonium (ATMACs), and dialkyldimethylammonium compounds (DDACs) have been widely used for over six decades as disinfectants, especially during the COVID-19 pandemic. Here we describe methods for the determination of 7 BACs, 6 ATMACs, 6 DDACs, 8 BAC metabolites, and the structurally similar quaternary ammonium compound (QAC) herbicides diquat, paraquat, and difenzoquat in human serum and urine using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The methods were optimized using isotopically labelled internal standards and solid-phase extraction with weak cation-exchange cartridges. We separated diquat and paraquat chromatographically using a mixed-mode LC column, and BACs, ATMACs, DDACs, difenzoquat, and BAC metabolites using reversed-phase (C8 and C18) LC columns. Method limits of detection (MLODs) and quantification (MLOQs) were 0.002-0.42 and 0.006-1.40 ng/mL, respectively. Recoveries of all analytes fortified at 1, 5, and 20 ng/mL concentrations in serum and urine matrices were 61-129%, with standard deviations of 0-20%. Repeated analysis of similarly fortified serum and urine samples yielded intra-day and inter-day variations of 0.22-17.4% and 0.35-17.3%, respectively. Matrix effects for analytes spiked into serum and urine matrices ranged from -27% to 15.4%. Analysis of real urine and serum samples revealed the presence of several QACs in human serum. Although no parent BACs were found in urine, we detected, for the first time, several ω-hydroxy and ω-carboxylic acid metabolites of BACs at average concentrations in the range of 0.05-0.35 ng/mL. The developed method is suitable for application in large-scale biomonitoring of human exposure to QACs and their metabolites in human serum and urine.

Surfactant Pollution, an Emerging Threat to Ecosystem: Approaches for Effective Bacterial Degradation

The use of surfactants in households and industries is inevitable and so is their discharge into the environment, especially into the water bodies as effluents. Being surface-active agents, their utilization is mostly seen in soaps, detergents, personal care products, emulsifiers, wetting agents, etc. Anionic surfactants are the most used class. These surfactants are responsible for the foam and froth in the water bodies and cause potential adverse effects to both biotic and abiotic components of the ecosystem. Surfactants are capable of penetrating the cell membrane and thus cause toxicity to living organisms. Accumulation of these compounds has been known to cause significant gill damage and loss of sight in fish. Alteration of physiological and biochemical parameters of water decreases the amount of dissolved oxygen and thus affecting the entire ecosystem. Microbes utilizing surfactants as substrates for energy form the basis of the biodegradation of these compounds. The main organisms for surfactant biodegradation, both in sewage and natural waters, are bacteria. Several Pseudomonas and Bacillus spp. have shown efficient degradation of anionic surfactants namely: sodium dodecyl sulphate (SDS), linear alkylbenzene sulphonate (LAS), sodium dodecylbenzenesulphonate (SDBS). Also, several microbial consortia constituting Alcaligenes spp., Citrobacter spp., etc. have shown efficacy in the degradation of surfactants. The biodegradation efficiency studies of these microbes/microbial consortia would be of immense help in formulating better solutions for the bioremediation of surfactants and help to reduce their potential environmental hazards.

Canine parvovirus induces G1/S cell cycle arrest that involves EGFR Tyr1086 phosphorylation

Canine parvovirus (CPV) has been used in cancer control as a drug delivery vehicle or anti-tumor reagent due to its multiple natural advantages. However, potential host cell cycle arrest induced by virus infection may impose a big challenge to CPV associated cancer control as it could prevent host cancer cells from undergoing cell lysis and foster them regain viability once the virotherapy was ceased. To explore CPV-induced cell cycle arrest and the underlying mechanism toward improved virotherapeutic design, we focus on epidermal growth factor receptor (EGFR), a cellular receptor interacting with TfR that mediates CPV-host interactions, and alterations on its tyrosine phosphorylation sites in response to CPV infection. We found that CPV could trigger host G1/S cell cycle arrest via the EGFR (Y1086)/p27 and EGFR (Y1068)/STAT3/cyclin D1 axes, and EGFR inhibitor could not reverse this process. Our results contribute to our understandings on the mechanism of CPV-induced host cellular response and can be used in the onco-therapeutic design utilizing CPV by preventing host cancer cells from entering cell cycle arrest.

A Review on the Fate of Legacy and Alternative Antimicrobials and Their Metabolites during Wastewater and Sludge Treatment

Antimicrobial compounds are used in a broad range of personal care, consumer and healthcare products and are frequently encountered in modern life. The use of these compounds is being reexamined as their safety, effectiveness and necessity are increasingly being questioned by regulators and consumers alike. Wastewater often contains significant amounts of these chemicals, much of which ends up being released into the environment as existing wastewater and sludge treatment processes are simply not designed to treat many of these contaminants. Furthermore, many biotic and abiotic processes during wastewater treatment can generate significant quantities of potentially toxic and persistent antimicrobial metabolites and byproducts, many of which may be even more concerning than their parent antimicrobials. This review article explores the occurrence and fate of two of the most common legacy antimicrobials, triclosan and triclocarban, their metabolites/byproducts during wastewater and sludge treatment and their potential impacts on the environment. This article also explores the fate and transformation of emerging alternative antimicrobials and addresses some of the growing concerns regarding these compounds. This is becoming increasingly important as consumers and regulators alike shift away from legacy antimicrobials to alternative chemicals which may have similar environmental and human health concerns.

Occurrences of benzalkonium chloride in streams near a pharmaceutical manufacturing complex in Korea and associated ecological risk

Benzalkonium chloride (BKC) is a commonly used preservative in personal care products and pharmaceutical preparations. However, its ecological risks are not well understood because of lack of monitoring data and ecotoxicological information. In the present study, occurrence of BKC was investigated in the waters near a pharmaceutical manufacturing complex of South Korea and its acute and chronic ecotoxicities were evaluated using Daphnia magna and Japanese medaka (Oryzias latipes). Associated ecological risks were estimated by calculating hazard quotients (HQs). In addition, endocrine disruption potency of BKC was compared with those of other frequently used preservatives using human adrenal (H295R) and rat pituitary (GH3) cells. High concentration of BKC was detected at locations near the pharmaceutical manufacturing plants, i.e., 35.8 μg/L for dodecyl benzyl dimethyl ammonium chloride (BKC-C₁₂), and 21.6 μg/L tetradecyl benzyl dimethyl ammonium chloride (BKC-C₁₄). In Daphnia, 48 h immobilization EC₅₀ and 21 d reproduction NOEC were determined at 41.1 μg/L and ≥10.8 μg/L, respectively. For O. latipes, 96 h LC₅₀ was determined at 246 μg/L while the growth inhibition NOEC was ≥113.4 μg/L following early life stage exposure. BKC significantly up-regulated vitellogenin gene of juvenile fish, indicating its endocrine disrupting potential in fish. Exposure to BKC increased steroid hormone level in H295R cells, and induced cytotoxicity in GH3 cells. HQ values of BKC were determined at greater than one in the ambient water near pharmaceutical manufacturing facilities. Considering high ecological risk and endocrine disrupting potential, long-term consequences of BKC contamination in aquatic ecosystem need to be examined.

Increased Use of Quaternary Ammonium Compounds during the SARS-CoV-2 Pandemic and Beyond: Consideration of Environmental Implications

Quaternary ammonium compounds (QACs) are active ingredients in over 200 disinfectants currently recommended by the U.S. EPA for use to inactivate the SARS-CoV-2 (COVID-19) virus. The amounts of these compounds used in household, workplace, and industry settings has very likely increased, and usage will continue to be elevated given the scope of the pandemic. QACs have been previously detected in wastewater, surface waters, and sediments, and effects on antibiotic resistance have been explored. Thus, it is important to assess potential environmental and engineering impacts of elevated QAC usage, which may include disruption of wastewater treatment unit operations, proliferation of antibiotic resistance, formation of nitrosamine disinfection byproducts, and impacts on biota in surface waters. The threat caused by COVID-19 is clear, and a reasonable response is elevated use of QACs to mitigate spread of infection. Exploration of potential effects, environmental fate, and technologies to minimize environmental releases of QACs, however, is warranted.

Benzalkonium ion sorption to peat and clays: Relative contributions of ion exchange and van der Waals interactions

Due to their use in various domestic and industrial formulations, benzalkonium compounds have been isolated in many environmental matrices. Sorption to soil components has been shown to play a key role in their environmental fate. Whereas sorption of benzalkonium compounds to soils is attributed to cation exchange and van der Waals forces, the relative contributions of these two mechanisms at environmental levels have not been clearly defined. In this study a previously reported algal toxicity assay-based method was employed to determine the distribution coefficients (K_d) of benzalkonium compounds between water and soil components, at environmental concentrations. Cation exchange capacity corrected K_d values for organic matter and clays were all within one order of magnitude. This implies that ion exchange is the dominant mechanism of sorption for benzalkonium compounds. When the sorption data were used to compute sorption energies for four homologues of benzalkonium ions, the magnitude of the free energy change of sorption increased with size of the molecule. The increase in sorption energy could be partly explained by increased energy of hydration with addition of methylene groups to the alkyl chain. A model that predicts sorption coefficients of benzalkonium compounds to soils using organic carbon content and cation exchange capacity was also defined. When tested using an artificial soil, the model estimates were all within one order of magnitude of the experimental values.

Effective removal of polymer quaternary ammonium salt by biodegradation and a subsequent Fenton oxidation process

In this paper, a process combining biodegradation and Fenton oxidation was proposed for the removal of polydiallyldimethylammonium chloride-acrylic-acrylamide-hydroxyethyl acrylate (PDM) in aqueous phase. Biodegradation of PDM was investigated in activated sludge systems, and the effects of the solution pH, mixed liquid suspended solids (MLSS), salinity, co-substrate, and initial substrate concentration, were studied. The biodegradation process was well-described with the Monod model and the values of the kinetics parameters v_max, k_s were 0.05 h^-1 and 333 mg/L. The optimal biodegradation conditions in the experimental range were determined to be: pH = 7.0, 0%-0.01% (w/v) NaCl, 4000 mg/L of MLSS, and 500 mg/L of glucose as co-substrate. FT-IR analysis indicated that PDM molecules biodegradation partly. The microbial community structures and dehydrogenase activity analysis revealed that PDM showed some toxicity to microorganisms in activated sludge. The effects of several parameters, including the pH and chemical doses, were investigated for removing PDM in Fenton oxidation process. The optimal Fenton oxidation process conditions in the experimental range were pH = 2.0, Fe²⁺ concentration of 40 mg/L, and H₂O₂ dosage of 23 mL/L. PDM was treated by biodegradation and subsequent Fenton oxidation under the optimal operating conditions. The removal efficiency was 44.5% after the biodegradation process and further increased to 85.5% after Fenton oxidation. The combined process was revealed to be a promising solution for achieving effective and economical removal of PDM.