Consequences of a contaminant mixture of bisphenol A (BPA) and di-(2-ethylhexyl) phthalate (DEHP), two plastic-derived chemicals, on the diversity of coastal phytoplankton

Zooplankton-based adverse outcome pathways: A tool for assessing endocrine disrupting compounds in aquatic environments

Endocrine disrupting compounds (EDCs) pose a significant ecological risk, particularly in aquatic ecosystems. EDCs have become a focal point in ecotoxicology, and their identification and regulation have become a priority. Zooplankton have gained global recognition as bioindicators, benefiting from rigorous standardization and regulatory validation processes. This review aims to provide a comprehensive summary of zooplankton-based adverse outcome pathways (AOPs) with a focus on EDCs as toxicants and the utilisation of freshwater zooplankton as bioindicators in ecotoxicological assessments. This review presents case studies in which zooplankton have been used in the development of AOPs, emphasizing the identification of molecular initiating events (MIEs) and key events (KEs) specific to zooplankton exposed to EDCs. Zooplankton-based AOPs may become an important resource for understanding the intricate processes by which EDCs impair the endocrine system. Furthermore, the data sources, experimental approaches, advantages, and challenges associated with zooplankton-based AOPs are discussed. Zooplankton-based AOPs framework can provide vital tools for consolidating toxicological knowledge into a structured toxicity pathway of EDCs, offering a transformative platform for facilitating enhanced risk assessment and chemical regulation.

Phthalate diester occurrence in marine feed and food (Mediterranean Sea)

Organic contaminants such as diesters of phthalic acid (PAEs) can be conveyed by microplastics in aquatic environment and constitute a relevant risk to marine organisms and humans that consume them. A method was developed for the identification and quantitative detection of 6 dimethyl phthalate (DMP), di-ethyl phthalate (DEP), di-n-butyl phthalate (DNBP), butyl benzyl phthalate (BBP), di-2-ethylesyl phthalate (DHEP), and di-n-octyl phthalate (DnOP). PAEs were then quantified in mesozooplankton, mollusk bivalves, and fish from the north-western Mediterranean Sea. Among all PAEs, DEHP was found in all zooplankton samples, in 30% of fish samples, and in 10% of bivalve samples. DBP was instead recovered in only 4% of samples (plankton and fish).

Single and multispecies microalgae toxicological tests assessing the impact of several BPA analogues used by industry

BPA is a hazard for human and environmental health and recently BPA was added to the Candidate List of substances of very high concern by European Chemical Agency (ECHA). In accordance with this proposal, the authorities have encouraged the replacement of BPA by BPA analogues; however, little is known about the impact of these compounds on the environment. Due to this situation five BPA analogues (BPS, BPAP, BPAF, BPFL and BPC) were chosen in order to study their effects on marine primary producers. Three marine microalgae species (Phaeodactylum tricornutum, Tetraselmis suecica and Nannochloropsis gaditana) were selected for single and multispecies tests concerning the ecotoxicological effects of these BPA analogues. Microalgae were exposed to BPs over 72 h at different dosages (5, 20, 40, 80, 150 and 300 μM). Responses such as: growth, ROS production, cell complexity, cell size, autofluorescence of chlorophyll a, effective quantum yield of PSII and pigment concentrations were assessed at 24, 48 and 72 h. The results revealed that BPS and BPA showed lower toxicity to microalgae in comparison with BPFL > BPAF > BPAP and >BPC for the endpoints studied. N. gaditana was the least sensitive microalgae in comparison to P. tricornutum and T. suecica. However, a different trend was found in the multispecies tests where T. suecica dominated the microalgae community in relation to N. gaditana and P. tricornutum. The results of this work revealed for first time that present day BPA analogues are a threat and not a safe substitute for BPA in terms of the marine phytoplanktonic community. Therefore, the results of their impact on aquatic organisms should be shared.

Di(2-ethylhexyl) phthalate and microplastics cause necroptosis and apoptosis in hepatocytes of mice by inducing oxidative stress

Di(2-ethylhexyl) phthalate (DEHP) is a plasticizer and an endocrine disruptor. Microplastics (MPs) are pathogenic small plastic particles and abundant in the aqueous environment. The problem of residual hazards of plastic products is worthy of study, especially the joint exposure of a variety of plastic-related products to the toxic effect. We used 200 mg/kg DEHP and 10 mg/L MPs to establish exposure model in vivo and 2 mM DEHP and 200 μg/L MPs to establish AML12 cell exposure model in vitro. In vivo study results showed that compared with the control group (NC) group, DEHP and MPs significantly increased the contents of malondialdehyde and hydrogen peroxide, and significantly decreased the contents of glutathione and the activity of superoxide dismutase, total antioxidant capacity, catalase and glutathione peroxidase. The level of oxidative stress was further aggravated after combined exposure. The reactive oxygen species level of AML12 exposed to DEHP and MPs in vitro was significantly higher than NC group, and the combined exposure was significantly higher than the single exposure. The in vivo and in vitro also confirmed that DEHP and MPs could significantly increase the mRNA and protein levels of apoptosis markers and necroptosis markers and there was an additive effect. After N-acetylcysteine treatment in vitro, the above-mentioned oxidative stress level and cell damage decreased significantly. This study provided a reference for advocating the reduction of the mixed use of plastic products, and provided a basis for preventing the harm of plastic products residues.

Efficient recovery of bisphenol A from aqueous solution using K2CO3 activated carbon derived from starch-based polyurethane

Endocrine-disrupting compounds (EDCs) are increasingly polluting water, making it of practical value to develop novel desirable adsorbents for removing these pollutants from wastewater. Here, a simple cross-linking strategy combined with gentle chemical activation was demonstrated to prepare starch polyurethane-activated carbon (STPU-AC) for adsorbing BPA in water. The adsorbents were characterized by various techniques such as FTIR, XPS, Raman, BET, SEM, and zeta potential, and their adsorption properties were investigated comprehensively. Results show that STPU-AC possesses a large surface area (1862.55 m²·g^-1) and an abundance of functional groups, which exhibited superior adsorption capacity for BPA (543.4 mg·g^-1) and favorable regenerative abilities. The adsorption of BPA by STPU-AC follows a pseudo-second-order kinetic model and a Freundlich isotherm model. The effect of aqueous solution chemistry (pH and ionic strength) and the presence of other contaminants (phenol, heavy metals, and dyes) on BPA adsorption was also analyzed. Moreover, theoretical studies further demonstrate that hydroxyl oxygen and pyrrole nitrogen are the primary adsorption sites. We found that the efficient recovery of BPA was associated with pore filling, hydrogen-bonding interaction, hydrophobic effects, and π-π stacking. These findings demonstrate the promising practical application of STPU-AC and provide a basis for the rational design of starch-derived porous carbon.

Historical biomonitoring of pollution trends in the North Pacific using archived samples from the Continuous Plankton Recorder Survey

First started in 1931, the Continuous Plankton Recorder (CPR) Survey is the longest-running and most geographically extensive marine plankton sampling program in the world. This pilot study investigates the feasibility of biomonitoring the spatiotemporal trends of marine pollution using archived CPR samples from the North Pacific. We selected specimens collected from three different locations (British Columbia Shelf, Northern Gulf of Alaska, and Aleutian Shelf) in the North Pacific between 2002 and 2020. Comprehensive profiling of the plankton chemical exposome was conducted using liquid and gas chromatography coupled with tandem mass spectrometry (LC-MS/MS and GC-MS/MS). Our results show that phthalates, plasticizers, persistent organic pollutants (POPs), pesticides, pharmaceuticals, and personal care products were present in the plankton exposome, and that many of these pollutants have decreased in amount over the last two decades, which was most pronounced for tri-n-butyl phosphate. In addition, the plankton exposome differed significantly by regional human activities, with the most polluted samples coming from the nearshore area. Exposome-wide association analysis revealed that bioaccumulation of environmental pollutants was highly correlated with the biomass of different plankton taxa. Overall, this study demonstrates that exposomic analysis of archived samples from the CPR Survey is effective for long-term biomonitoring of the spatial and temporal trends of environmental pollutants in the marine environment.

Spectroscopic Tracking of the Characteristics of Microplastic-Derived Dissolved Organic Matter

Microplastic-derived dissolved organic matter (MP-DOM) has received increasing attention in recent years. In this study, the fluorescence excitation-emission matrix (EEM) combined with parallel factor analysis (PARAFAC) was used to track the leaching behavior of polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), polyethylene terephthalate (PET), and polystyrene (PS) MP-DOM. After seven days of leaching, PVC reached a leaching concentration of 7.59 mg/L, and the other four microplastics reached approximately 4.5~4.7 mg/L. The leaching activity of PVC was considerably more active in an alkaline environment and under UV irradiation. All the fluorescence signals of MP-DOM components were located in the protein/phenol-like fluorescence region. The fact that C1 and C2 were found in every microplastic revealed that these substances took up quite a large proportion of MP-DOM. Protein/phenolic substances in MP-DOM showed different binding ability with different heavy metals, which can be realized from the log K values calculated for Cr3+ (3.99–5.51), Cu2+ (3.06–4.83), Cd2+ (3.76–4.41), and Fe3+ (3.11–5.03). This work introduced more MP-DOM samples, and offered spectroscopic insight into the characteristics and environmental fate of MP-DOM at a molecular level. Furthermore, this study displayed the potential applicability of using the integrated methods to track the MP-DOM formation process and environmental behavior in natural aquatic systems.

Roles of microplastic-derived dissolved organic matter on the photodegradation of organic micropollutants

Microplastic-derived dissolved organic matter (MP-DOM) is ubiquitous in water environment and exhibits photosensitivity. However, little is known about the effects of MP-DOM on the photodegradation of organic micropollutants in natural water. In this study, we investigated the effect of MP-DOM derived from two typical plastics, i.e., polystyrene (PS), and polyethylene (PE), on the photodegradation of a typical organic micropollutants sulfamethoxazole (SMX) in a simulative natural water system. MP-DOM exerted a significant inhibition on the SMX photodegradation, mainly attributed to the direct photolysis inhibition of SMX caused by the inner filter effect and the complexation effect. Despite the enhanced reactive oxygen species (ROS) generation with the increase of their steady-state concentration by 41.1 - 160.7 %, PS-DOM exhibited high oxidation resistance, causing an inhibition on the photodegradation of SMX probably through transferring electrons to the SMX intermediates. This study helps to deepen the understanding of microplastic photochemical behavior in natural water.

The Enzymatic and Non-Enzymatic Antioxidant System Response of the Seagrass Cymodocea nodosa to Bisphenol-A Toxicity

The effects of environmentally relevant bisphenol A (BPA) concentrations (0.3, 1 and 3 μg L⁻¹) were tested at 2, 4, 6 and 8 days, on intermediate leaves, of the seagrass Cymodocea nodosa. Hydrogen peroxide (H₂O₂) production, lipid peroxidation, protein, phenolic content and antioxidant enzyme activities were investigated. Increased H₂O₂ formation was detected even at the lowest BPA treatments from the beginning of the experiment and both the enzymatic and non-enzymatic antioxidant defense mechanisms were activated upon application of BPA. Elevated H₂O₂ levels that were detected as a response to increasing BPA concentrations and incubation time, led to the decrease of protein content on the 4th day even at the two lower BPA concentrations, and to the increase of the lipid peroxidation at the highest concentration. However, on the 6th day of BPA exposure, protein content did not differ from the control, indicating the ability of both the enzymatic and non-enzymatic mechanisms (such as superoxide dismutase (SOD) and phenolics) to counteract the BPA-derived oxidative stress. The early response of the protein content determined that the Low Effect Concentration (LOEC) of BPA is 0.3 μg L⁻¹ and that the protein content meets the requirements to be considered as a possible early warning “biomarker” for C. nodosa against BPA toxicity.

Chemical contamination alters the interactions between bacteria and phytoplankton

Bacteria and phytoplankton are key players in aquatic ecosystem functioning. Their interactions mediate carbon transfer through the trophic web. Chemical contamination can alter the function and diversity of phytoplankton and bacterioplankton, with important consequences for ecosystem functioning. The aim of the present study was to assess the impact of chemical contamination on the interactions between both biological compartments. Two contrasting marine coastal ecosystems, offshore waters and lagoon waters, were exposed to chemical contamination (artificial or produced from resuspension of contaminated sediment) in microcosms in four seasons characterized by distinct phytoplankton communities. Offshore waters were characterized by a complex phytoplankton-bacterioplankton network with a predominance of positive interactions between both compartments, especially with Haptophyta, Cryptophyta, and dinoflagellates. In contrast, for lagoon waters, the phytoplankton-bacterioplankton network was simpler with a prevalence of negative interactions with Ochrophyta, Cryptophyta, and flagellates. Contamination with an artificial mix of pesticides and trace metal elements resulted in a decrease in the number of interactions between phytoplankton and bacterioplankton, especially for offshore waters. Resuspension of contaminated sediment also altered the interactions between both compartments. The release of nutrients stored in the sediment allowed the growth of nutrient limited phytoplankton species with marked consequences for the interactions with bacterioplankton, with a predominance of positive interactions, whereas in lagoon waters, negative interactions were mostly observed. Overall, this study showed that chemical contamination and sediment resuspension resulted in significant effects on phytoplankton-bacterioplankton interactions that can alter the functioning of anthropogenic coastal ecosystems.

Investigation of endocrine disruptor pollutants and their metabolites along the Romanian Black Sea Coast: Occurrence, distribution and risk assessment

In recent years, the occurrence of organic UV-filters (UVFs) and bisphenol derivatives (BPs) in the marine environment has raised high concerns all over the world, due to the potentially adverse impacts on marine organism and, indirectly on human health. This paper reports, for the first time in Romania, the occurrence, distribution pattern and environmental risk assessment of UVFs, BPs and their metabolites in seawater, sediment and algae collected from the Romania Black Sea coastal region. BP-3 (2-hydroxy-4-methoxy-benzophenone) was the most abundant contaminant in seawater samples, with detection frequency of 100 %. Sediment samples were dominated by ES (Ethylhexyl salicylate), with concentration values up to 5823 ng/g d.w., while for algae, concentrations of several hundreds of ng/g d.w. were determined for BP-3, BS (Benzyl salicylate) and BPE (Bisphenol E). Environmental risk assessment revealed that some UVFs and BPs detected in seawater samples were hazardous to the marine organism of the Black Sea.

Bisphenol A in Africa: A review of environmental and biological levels

Bisphenol A (BPA) is a synthetic ubiquitous environmental toxicant present in many industrial and consumer products. BPA is recognized as an endocrine-disrupting chemical (EDC), and its mechanisms of perturbation of the physiological process include interference with hormone pathways and epigenetic modifications. An increase in industrial productions and food packaging across Africa has resulted in increased utilization of BPA-containing products with a concomitant increase in environmental bioaccumulation and human exposure. In order to assess the extent of this bioaccumulation, we identified, collated, and summarized the levels of BPA that have been reported across Africa. To achieve this aim, we performed a systematic search of four indexing databases to identify articles and extracted the necessary data from the selected articles. Of the 42 publications we retrieved, 42% were on water samples, 22% on food, 20% on human biological fluids, 10% on sediments, soils, and sludge and 6% on consumer and personal care products (PCPs). The highest level of BPA reported in literature across Africa was 251 ng/mL, 384.8 ng/mL, 937.49 ng/g, 208.55 ng/mL, 3,590 μg/g, and 154,820 μg/g for water, wastewater, food, biological fluids, consumer and PCPs, and semisolids, respectively. This review presented a comparative perspective of these levels relative to regulatory limits and levels reported from other continents. Finally, this review highlighted critical needs for the regulation of BPA across Africa in order to stem its environmental and toxicological impact. We hope that this review will stimulate further research in understanding the impact of BPA on health outcomes and wellbeing across Africa.

Emerging Roles of PETase and MHETase in the Biodegradation of Plastic Wastes

Polyethylene terephthalate (PET) is extensively used in plastic products, and its accumulation in the environment has become a global concern. Being a non-degradable pollutant, a tremendous quantity of PET-bearing plastic materials have already accumulated in the environment, posing severe challenges towards the existence of various endangered species and consequently threatening the ecosystem and biodiversity. While conventional recycling and remediation methodologies so far have been ineffective in formulating a "green" degradation protocol, the bioremediation strategies-though nascent-are exhibiting greater promises towards achieving the target. Very recently, a novel bacterial strain called Ideonella sakaiensis 201-F6 has been discovered that produces a couple of unique enzymes, polyethylene terephthalate hydrolase and mono(2-hydroxyethyl) terephthalic acid hydrolase, enabling the bacteria to utilize PET as their sole carbon source. With a detailed understanding of the protein structure of these enzymes, possibilities for their optimization as PET degrading agents have started to emerge. In both proteins, several amino acids have been identified that are not only instrumental for catalysis but also provide avenues for the applications of genetic engineering strategies to improve the catalytic efficiencies of the enzymes. In this review, we focused on such unique structural features of these two enzymes and discussed their potential as molecular tools that can essentially become instrumental towards the development of sustainable bioremediation strategies. Degradation PET by wild type and genetically engineered PETase and MHETase. Effect of the MHETase-PETase chimeric protein and PETase expressed on the surface of yeast cells on PET degradation is also shown.

Aqueous adsorption of bisphenol A over a porphyrinic porous organic polymer

A new porphyrinic porous organic polymer (PPOP) with high stability and excellent textural properties (929 m²/g surface area with 0.73 cm³/g pore volume) was made via the Friedel-Crafts reaction and applied for bisphenol A (BPA) adsorption in water. The material was examined by X-ray diffraction, N₂ adsorption-desorption isotherms, scanning electron microscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, and solid-state ¹³C CP-MAS nuclear magnetic resonance spectroscopy. PPOP was proven highly effective for capturing BPA among the many adsorbent materials investigated. The Langmuir model could closely match the adsorption isotherm data with a high adsorption amount of ca. 653 mg/g at 25 °C. Approximately 95% of BPA was adsorbed in 50 min, and the pseudo-second-order kinetic model satisfactorily described the adsorption behavior. This adsorption process was exothermic (ΔH° = -39.10 kJ/mol), and the capacity gradually decreased with increasing pH. Spectroscopic analyses indicated that the BPA adsorption on PPOP was affected by (1) π-π interaction between BPA and the aromatic constituents of PPOP, (2) hydrogen bonding between the N sites of porphyrin units in PPOP and the hydroxyl group of BPA and, and (3) hydrophobic interactions. PPOP was easily regenerated after acetone washing, and >98% efficiency was observed throughout the five repeated adsorption-desorption cycles.

Enhanced removal of the endocrine disruptor compound Bisphenol A by adsorption onto green-carbon materials. Effect of real effluents on the adsorption process

The high exposure to the endocrine disrupting compounds (EDC) in water represents a relevant issue for the health of living beings. The xenoestrogen Bisphenol A (BPA), a suspected EDC, is an industrial additive broadly used for manufacturing polycarbonate and epoxy resins. Due to its harmful effect in humans and the aquatic environment, an efficient method to remove BPA from wastewater is urgently required. The present work aims to study the adsorption of BPA from aqueous solutions onto carbonaceous materials, e.g., a synthesized carbon xerogel (RFX), a chemical-activated carbon from Kraft lignin (KLP) and a commercial activated carbon (F400) for comparative purposes. Batch kinetic and adsorption tests of BPA in ultrapure water were accomplished, finding higher adsorption capacities of BPA onto both F400 activated carbon (q_sat = 407 mg g^-1) and the biochar KLP (q_sat = 220 mg g^-1), versus to that obtained for the xerogel (q_sat = 78 mg g^-1). Furthermore, kinetic experiments revealed faster kinetic adsorption for RFX and KLP materials, achieving the equilibrium time within 24 h, attributed to their more-opened porous structure. Pseudo-first order, pseudo-second order, Elovich, intra-particle diffusion and film diffusion models were used to fit the experimental data. Thus, the BPA adsorption isotherms were analysed by Langmuir, Freundlich, Sips, Redlich-Peterson and Dual-site Langmuir (DLS) isotherm models.In addition, the influence of different aqueous matrices, such as a hospital wastewater, a wastewater treatment plant (WWTP) effluent and a river water, on BPA removal efficiency has been explored. These adsorption tests revealed a clear competitive effect between the target compound (BPA) and the natural organic matter content (NOM) present in the matrices for the active sites, resulting in a high decreasing of BPA adsorption removal.

Occurrence, distribution, and risk assessment of bisphenol A in the surface sediments of Musa estuary and its tributaries in the northern end of the Persian Gulf, Iran

Musa estuary and its tributaries, located northwest of the Persian Gulf, host many industrial complexes, high-density ports, and urban areas along their coastal regions and are, therefore, constantly threatened by chemical contamination. The present study is the first to have investigated the surface sediments in six stations of the Musa estuary tributaries. The mean variations in BPA concentrations in the dry sediments of these stations ranged from 2.22 to 16.71 ng/g. Fairly high levels of BPA were found in Durragh station and its neighboring industrial sites. The lowest BPA level (2.22 ng/g) was observed in the station at the mouth of the Persian Gulf. Based on the EU risk-assessment system, the concentration levels of BPA in the sediments are in the low-risk range. Only in certain areas of the estuary were the sediments of moderate risk, and prolonged contact between ecological populations and them could cause toxicity in aquatic organisms.