Detection and characterisation of microplastics and microfibres in fishmeal and soybean meal

Polystyrene microplastics exposure reduces meat quality and disturbs skeletal muscle angiogenesis via thrombospondin 1

Microplastics (MPs) pose a significant threat to livestock health. Yet, the roles of polystyrene MPs (PS-MPs) on meat quality and skeletal muscle development in pigs have not been fully determined. To investigate the effect of PS-MPs on skeletal muscle, piglets were given diets supplementation with 0 mg/kg (CON group), 75 mg/kg (75 mg/kg PS-MPs group), and 150 mg/kg PS-MPs (150 mg/kg PS-MPs group), respectively. The results indicated that the average daily gain (ADG) of piglets in the 150 mg/kg PS-MPs group was significantly lower than that in the CON group. No significant differences were observed in the final body weight and ADG between the CON group and the 75 mg/kg PS-MPs group. Piglets in the 150 mg/kg PS-MPs group exhibited decreased meat redness index and type I muscle fiber density. Metabolomic analysis revealed that the contents of meat flavor compounds carnosine, beta-alanine, palmitic acid, and niacinamide in muscle were lower in the 150 mg/kg PS-MPs group than in the CON group. Additionally, piglets subjected to 150 mg/kg PS-MPs exhibited impaired muscle angiogenesis. Further analysis indicated that PS-MPs exposure up-regulated thrombospondin 1 (THBS1) expression by inhibiting THBS1 mRNA and protein degradation, thereby disrupting skeletal muscle angiogenesis. These findings indicate that PS-MPs exposure adversely affects meat quality and hinders skeletal muscle angiogenesis in pigs, providing deeper insights into the detrimental effects of PS-MPs on meat quality and skeletal muscle development.

Microplastic contamination of intertidal sediment and cockles (Cerastoderma edule)

Microplastic pollution represents a new threat to both marine environments and the species that reside within them. This study examined the temporal concentrations of microplastics found in the commercially and ecologically important bivalve, Cerasastoderma edule and the presence of microplastics in intertidal sediment from the Special Area of Conservation (SAC) and Special Protected Area (SPA) of Dundalk Bay, Ireland. A microplastic range of 1.55 ± 1.38 to 1.92 ± 1.00 g-1 and 3.43 ± 2.47 to 6.90 ± 3.68 ind-1 was reported between seasons. Microfibres dominated the shape of microplastics present in both sediment and cockles. While a wider range of polymers were identified in cockles than in sediment, microplastic concentrations recovered from both intertidal sites studied were approximately double the estimated safe loading levels for this pollutant. The potential of cockles to perform as shallow environment biomonitors of microplastic pollution was identified as they presented buoyant microplastics that were not identified in sediment samples.

Disposition of [14C]-polystyrene microplastics after oral administration to lactating sheep

Microplastics have become a ubiquitous contaminant, but their fate in food animals is largely unknown. In this study, [14C]-polystyrene microplastic (PS-MP) particles were orally dosed to lactating sheep to evaluate their absorption and disposition. Elimination of the [14C]-PS-MP was predominately through faeces with faecal radioactivity peaking at 24 h post-dosing but continuing to be present throughout the entire 72 h study period. Only a small fraction (≤ 1%) of the dosed [14C]-PS-MP was present in blood, milk, and urine. Pharmacokinetic analysis of blood plasma radioactivity, using non-compartment modeling, indicated rapid absorption (T1/2 0.4 to 3 h) with slow elimination (T1/2 37 to 48 h). Radioactivity in milk and urine had similar elimination patterns with radiocarbon activities peaking 24 h post-dosing with detectable elimination throughout the 72 h study period. No radioactivity was quantifiable in tissues at the 72 h withdrawal period.

Microplastics contamination in commercial fish meal and feed: a major concern in the cultured organisms

The growing scale of plastic pollution causes a devastating impact on the aquatic ecosystem. The people largely depend on animal-based food for their protein requirements. In this study, we analysed 10 different fish meal samples and 20 feed samples used in farming to understand the level of microplastic (MPs) contamination and estimate the amount of MPs ingested by farmed fish, shrimp, and chicken through feed. The abundance of MPs in fish meal samples ranges from 210 ± 98.21 to 1154 ± 235.55 items/kg. The fish meal produced from dried fish is more prone to MPs contamination than that produced from fresh fish. In the case of fish feed, MP abundances range from 50 ± 22.36 to 160 ± 36.57 items/kg in shrimp feeds, 60 ± 26.74 to 230 ± 52.32 items/kg in fish feeds and 90 ± 25.11 to 330 ± 36.12 items/kg in chicken feeds. The exposure rate of MPs is higher in the grower- and finisher-stage feeds than in the starter feed. Fiber-shaped MPs of size 100-500 μm with PE and PP polymers were predominantly found in fish meal and feed samples. EDAX analysis showed the presence of Cr, Cd, Ti, Ni, Cu, As, Al, Pb, Hg, Cd, Ti, Fe, Ca, K, and Si in fish meal samples and Ca, Na, Zn, Cu, Ni, Cl, Al, Si, S, Pb, Cd, Ti, Cr, Mg and Fe in feed samples. The possible level of exposure of microplastic particles was calculated based on MP contamination in feed, feed consumption rate, and body weight. We estimated an MP exposure level of 531-1434 items/kg feed for farmed shrimp, 234-4480 items/kg feed for fishes, and 3519-434,280 items/kg feed for chicken. This study concludes that fish meal and feed are one of the important exposure routes of MPs to the farmed animals.

Microplastic and PTFE contamination of food from cookware

Microplastics are a prolific environmental contaminant that have been evidenced in human tissues. Human uptake of microplastic occurs via inhalation of airborne fibres and ingestion of microplastic-contaminated foods and beverages. Plastic and PTFE-coated cookware and food contact materials may release micro- and nanoplastics into food during food preparation. In this study, the extent to which non-plastic, new plastic and old plastic cookware releases microplastics into prepared food is investigated. Jelly is used as a food simulant, undergoing a series of processing steps including heating, cooling, mixing, slicing and storage to replicate food preparation steps undertaken in home kitchens. Using non-plastic cookware did not introduce microplastics to the food simulant. Conversely, using new and old plastic cookware resulted in significant increases in microplastic contamination. Microplastics comprised PTFE, polyethylene and polypropylene particulates and fibrous particles, ranging 13-318 μm. Assuming a meal was prepared daily per the prescribed methodology, new and old plastic cookware may be contributing 2409-4964 microplastics per annum into homecooked food. The health implications of ingesting microplastics remains unclear.

Occurrence of microplastics and metals in European seabass produced in different aquaculture systems: Implications for human exposure, risk, and food safety

Microplastics (MPs) are emerging contaminants of increasing concern as they may cause adverse effects and carry other contaminants, which may potentially compromise human health. Despite occurring in aquatic ecosystems worldwide, the knowledge about MP presence in different aquaculture systems and their potential impact on seafood products is still limited. This study aimed to determine the levels of MPs in water, feed, and European seabass (Dicentrarchus labrax) from three relevant aquaculture systems and estimate human exposure to MPs and metals through seabass consumption. The recirculating aquaculture system (RAS) had the highest MP occurrence in water and feed. MP levels in seabass followed the aquaculture system's levels in water and feed, with RAS-farmed fish presenting the highest MP load, both in the fish gastrointestinal tract (GIT) and muscle, followed by pond-, and cage-farmed fish. MPs' characteristics across aquaculture systems and fish samples remained consistent, with the predominant recovered particles falling within the MP size range. The particles were visually characterized and chemically identified by micro-Fourier Transform Infrared Spectroscopy (μFTIR). Most of these particles were fibres composed of man-made cellulose and PET. MP levels in GIT were significantly higher than in muscle for pond- and RAS-farmed fish, MPs' bioconcentration factors >1 indicated bioconcentration in farmed seabass. Metal concentrations in fish muscle were below permissible limits, posing low intake risks for consumers according to the available health-based guidance values and estimated dietary scenarios.

Comparison of three digestion methods for microplastic extraction from aquaculture feeds

Microplastics (MPs) are ubiquitous pollutants found in aquaculture animals that may threaten human health through the food chain. However, there is a lack of effective methods for extracting MPs from aquaculture feeds containing complex components such as organic matter and fish bones. Therefore, in the present study, the extraction efficiency of three digestion methods using 30 % H2O2, Fenton reagent, and 30 % H2O2 + HNO3 for different particle sizes and types of MPs in aquaculture feeds was investigated and compared. The total digestion efficiency of the aquaculture feeds by 30 % H2O2 was 97.3 ± 0.1 %, while the recovery efficiency of MPs was 91.3 ± 1.1 % -103.1 ± 0.9 %. However, there was a large deviation in the extraction efficiency of MPs from aquaculture feeds by the Fenton reagent and 30 % H2O2 + HNO3. Notably, the surface morphology, particle size distribution, and oxidation degree of MPs hardly changed after 30 % H2O2 digestion. More importantly, the changes in the spectral features and carbonyl index of MPs after 30 % H2O2 digestion were smaller than those of the Fenton reagent and 30 % H2O2 + HNO3, which did not affect the identification of MPs. Overall, 30 % H2O2 was more efficient in extracting MPs from aquaculture feeds, and no significant effect on the characteristics of MPs was observed. This work provides novel insights into the effect of chemical pretreatment on the extraction of MPs in aquaculture feeds and provides an optimal protocol for the detection of MPs in aquaculture feeds.

Microplastic contamination in commercial fish feeds: A major concern for sustainable aquaculture from a developing country

Plastic pollution has become a global issue nowadays. Due to the increased population in developing countries, we largely depend on fish from our aquaculture industry to meet the required protein demand. Though several studies documented plastic ingestion in freshwater and marine organisms, very limited studies have been conducted to elucidate microplastic (MP) contamination in commercial fish feed. Therefore, this study was designed to identify, quantify, and characterize microplastics (MPs) in commercial fish feeds in Bangladesh and assess possible health risks in fish consuming different commercial fish feeds. All fish feed samples were 100 % contaminated with MPs, where the mean abundance of MPs ranged between 500 and 2200 MPs/kg. No significant differences among different types of feeds (e.g., starter, grower, and finisher) were observed in terms of MPs abundance (F = 0.999, p = 0.385). This study revealed that fiber was the most dominant shape of MPs (90 %), while the most dominant color of MPs was red (34 %), followed by black (31 %) and blue (19 %). The 100-1500 µm size class covers 88 % of the total MPs in the collected fish feed samples. Identified polymers in the samples were polyethylene (PE, 37.71 %), polyvinyl chloride (PVC, 27.14 %), polypropylene (PP, 22.08 %), and polyethylene terephthalate (PET, 13.07 %), respectively, where PE and PVC fall under the risk category IV to V. The Pollution load index (PLI) values of all fish feed samples were <10, indicating the risk category of I (low risk). Therefore, this study highly recommended avoiding plastic materials in the packaging and storing purposes of feed ingredients in the feed mills to ensure contamination-free fish feed for sustainable aquaculture.

An assessment of approaches and techniques for estimating water pollution releases from aquaculture production facilities

The rapid expansion of the aquaculture industry raises concerns about water pollution from aquaculture production facilities (APFs). APFs release pollutants, including fish feed and feces, threatening the environment. The United Nations has introduced regulatory tools like the National Baseline Budget of pollutants (NBB) and Pollutant Release and Transfer Registers (PRTRs) to monitor pollution. However, these tools lack specific capabilities for estimating aquaculture-related pollution, especially from mariculture non-point sources (NPS). The United Nations Programme for the Assessment and Control of Marine Pollution in the Mediterranean (UNEP/MAP) stresses the need for an inventory and guidance document. Our comprehensive literature review focused on (1) NPS discharges of specific pollutants from APFs, (2) methods for estimating potential pollution releases from aquaculture, and (3) compiling information into a guidance document summarizing estimation methods. The geographical coverage of our study includes Europe, Australia, the USA, Canada, and East/Southeast Asia.

Microplastics contamination in fish feeds: Characterization and potential exposure risk assessment for cultivated fish of Bangladesh

Fish feed is becoming an increasingly vital source of nourishment for farmed fish, which are mainly coming from marine fish and agricultural sources. Anthropogenic particles, such as microplastics, are abundant in both marine fish and agricultural byproducts that are utilized to make fish feed. This study investigated whether fish feed could be a source of microplastic contamination, and revealed that a 20 weeks adult farmed tilapia fish might consume up to 268.45 ± 1.438 microplastic particles via fish feed where finisher type feeds were found to be mostly contributory in this number. The microplastics were initially observed with a stereomicroscope and FESEM-EDS. Polymeric composition of microplastics was determined to be polypropylene (PP), nylon-6 (NY-6), polyethylene terephthalate (PET), polystyrene (PS), polyvinyl alcohol (PVA), polyethylene (PE), high- and low-density polyethylene (HDPE, LDPE), ethylene vinyl acetate (EVA), polycarbonate (PC), poly vinyl acetate (PVAc), poly urethane (PU) and polyvinyl chloride (PVC) by FTIR. Results also revealed that the size of microplastic particles in all fish feed ranged from 14 μm to 4480 μm, with 550 ± 45.45 to 11,600 ± 56.1 microplastic particles/kg of fish feed. The FESEM-EDS data demonstrated to overlook the microplastic surface along with attachment of heavy metals onto that surface such as Pb, Ni, and Co in finisher type feed that could create additional health risks.

Dietary Microplastic Administration during Zebrafish (Danio rerio) Development: A Comprehensive and Comparative Study between Larval and Juvenile Stages

One of the main sources of MPs contamination in fish farms is aquafeed. The present study investigated, for the first time through a comparative approach, the effects of different-sized fluorescent MPs included in a diet intended for zebrafish (Danio rerio). A comparison based on fish developmental stage (larval vs. juvenile), exposure time, and dietary MPs' size and concentration was performed. Four experimental diets were formulated, starting from the control, by adding fluorescent polymer A (size range 1-5 µm) and B (size range 40-47 µm) at two different concentrations (50 and 500 mg/kg). Zebrafish were sampled at 20 (larval phase) and 60 dpf (juvenile stage). Whole larvae, intestine, liver and muscles of juveniles were collected for the analyses. Polymer A was absorbed at the intestinal level in both larvae and juveniles, while it was evidenced at the hepatic and muscular levels only in juveniles. Hepatic accumulation caused an increase in oxidative stress markers in juveniles, but at the same time significantly reduced the number of MPs able to reach the muscle, representing an efficient barrier against the spread of MPs. Polymer B simply transited through the gut, causing an abrasive effect and an increase in goblet cell abundance in both stages.

Microplastics in water, feed and tissues of European seabass reared in a recirculation aquaculture system (RAS)

Plastic particles (PLs) are ubiquitous in aquatic ecosystems and aquaculture production is susceptible to contamination from external or endogenous sources. This study investigated PL presence in water, fish feed and body sites of 55 European seabass produced in a recirculating aquaculture system (RAS). Fish morphometric parameters and health status biomarkers were determined. A total of 372 PLs were recovered from water (37.2 PL/L), 118 PLs from feed (3.9 PL/g), and 422 from seabass (0.7 PL/g fish; all body sites analysed). All 55 specimens had PLs in at least two of the four body sites analysed. Concentrations were higher in the gastrointestinal tract (GIT; 1.0 PL/g) and gills (0.8 PL/g) than in the liver (0.8 PL/g) and muscle (0.4 PL/g). PL concentration in GIT was significantly higher than in muscle. Black, blue, and transparent fibres made of man-made cellulose/rayon and polyethylene terephthalate were the most common PLs in water and seabass, while black fragments of phenoxy resin were the most common in feed. The levels of polymers linked to RAS components (polyethylene, polypropylene, and polyvinyl chloride) were low suggesting a limited contribution to the overall PL levels found in water and/or fish. The mean PL size recovered from GIT (930 μm) and gills (1047 μm) was significantly larger than those found in the liver (647 μm) and dorsal muscle (425 μm). Considering all body sites, PLs bioconcentrated in seabass (BCF_Fish >1) but their bioaccumulation did not occur (BAF_Fish <1). No significant differences were observed in oxidative stress biomarkers between fish with low (<7) and high (≥7) PL numbers. These findings suggest that fish produced in RAS are mainly exposed to MPs through water and feed. Further monitoring under commercial conditions and risk assessment are warranted to identify potential threats to fish and human health and define mitigating measures.

Quantification of microfibre release from textiles during domestic laundering

Domestic laundering of textiles is being increasingly recognised as a significant source of microfibre pollution. Reliable quantification of microfibre release is necessary to understanding the scale of this issue and to evaluate the efficacy of potential solutions. This study explores three major factors that influence the quantification of microfibres released from the domestic laundering of textiles: test methodologies, laundering variables, and fabric variables.A review of different test methods is presented, highlighting the variation in quantification created by using different methodologies. A reliable and reproducible method for quantifying microfibre release from domestic laundering is used to explore the impact of laundering and fabric variables experimentally. The reproducibility and reliability of the method used was validated through inter-laboratory trials and has informed the development of European and international testing standards. Our results show that increasing the wash liquor ratio and wash agitation results in a greater mass of microfibres released, but we found that fabric variables can have a greater influence on microfibre release than the laundering variables tested in this study. However, no single fabric variable appeared to have a dominant influence.Using the data obtained and assumptions for washing load size and frequency, results were scaled to reflect possible annual microfibre release from untreated domestic laundering in the UK. Depending on different laundering and fabric variables, these values range from 6490 tonnes to 87,165 tonnes of microfibre discharged in the UK each year.

Microplastics in Terrestrial Domestic Animals and Human Health: Implications for Food Security and Food Safety and Their Role as Sentinels

Terrestrial domestic animals are exposed to microplastics, therefore, contaminating the food chain, in the case of livestock, or acting as sentinels for human exposure, in the case of companion animals. The aim of this review was to address the importance of terrestrial domestic animals on human exposure to microplastics. Animal products may already show some microplastics contamination, which may occur during their lifetime, possibly also compromising productivity, and during processing, originating from equipment and packaging. Moreover, release of microplastics in animal feces (or manure) leads to the contamination of agricultural fields, with possible impacts and internalization in plants. Therefore, microplastics pose a threat to food security, compromising food productivity, and food safety, by being a foreign material found in animal products. Conversely, in urban environments, companion animals (cats and dogs) may be relevant sentinels for human exposure. While oral exposure may vary in pets compared to humans, due to indiscriminate ingestion and chewing or licking behaviors, airborne exposure is likely to be a good indicator for human exposure. Therefore, future studies should address the importance of terrestrial domestic animals for human exposure of microplastics, both in the food chain and as sentinels for environmental exposure.

Microplastic-Contaminated Feed Interferes with Antioxidant Enzyme and Lysozyme Gene Expression of Pacific White Shrimp (Litopenaeus vannamei) Leading to Hepatopancreas Damage and Increased Mortality

Microplastic pollution can interfere with aquatic animal health and nonspecific immunity, increasing the potential for pathogen infection in crustaceans. However, the long-term effects of microplastics on crustacean immunity are less understood, especially regarding their toxicity in Pacific white shrimp (Litopenaeus vannamei). Effects of high-density polyethylene microplastics (HDPE-MPs) in feed on the mortality rate, hepatopancreas, and nonspecific immune system gene expression of Pacific white shrimp are presented. The LC₅₀ at day 28 of HDPE-MP exposure was determined as 3.074% HDPE-MP in feed. A significant upregulation of the superoxide dismutase (SOD) and glutathione peroxidase (GPx) genes was observed in shrimp that were fed with 0.1 and 0.5% of HDPE-MP; then, they were downregulated significantly, except for the SOD gene expression of shrimp fed with 0.1% of HDPE-MP. The lysozyme (LYZ) gene was upregulated significantly in shrimp that were fed with 0.5, 1, and 3% HDPE-MP for 7 days and downregulated significantly in HDPE-receiving groups for at least 14 days. Significant histopathological changes in the hepatopancreas were observed in the treatment groups. The histopathological score of each lesion was correlated with the increase in HDPE-MP concentration. This study shows that the ingestion of HDPE microplastics can alter the expression of nonspecific immune system genes and damage the hepatopancreas in Pacific white shrimp.