A multiplexed PCR-coupled liquid bead array for the simultaneous detection of four biothreat agents

Development and Inter-Laboratory Validation of Diagnostics Panel for Detection of Biothreat Bacteria Based on MOL-PCR Assay

Early detection of biohazardous bacteria that can be misused as biological weapons is one of the most important measures to prevent the spread and outbreak of biological warfare. For this reason, many instrument platforms need to be introduced into operation in the field of biological warfare detection. Therefore the purpose of this study is to establish a new detection panel for biothreat bacteria (Bacillus anthracis, Yersinia pestis, Francisella tularensis, and Brucella spp.) and confirm it by collaborative validation by using a multiplex oligonucleotide ligation followed by polymerase chain reaction and hybridization to microspheres by MagPix detection platform (MOL-PCR). Appropriate specific sequences in bacterial DNA were selected and tested to assemble the detection panel, and MOLigo probes (short specific oligonucleotides) were designed to show no cross-reactivity when tested between bacteria and to decrease the background signal measurement on the MagPix platform. During testing, sensitivity was assessed for all target bacteria using serially diluted DNA and was determined to be at least 0.5 ng/µL. For use as a diagnostic kit and easier handling, the storage stability of ligation premixes (MOLigo probe mixes) was tested. This highly multiplex method can be used for rapid screening to prevent outbreaks arising from the use of bacterial strains for bioterrorism, because time of analysis take under 4 h.

Proteomic Methods of Detection and Quantification of Protein Toxins

Biological toxins are a heterogeneous group of compounds that share commonalities with biological and chemical agents. Among them, protein toxins represent a considerable, diverse set. They cover a broad range of molecular weights from less than 1000 Da to more than 150 kDa. This review aims to compare conventional detection methods of protein toxins such as in vitro bioassays with proteomic methods, including immunoassays and mass spectrometry-based techniques and their combination. Special emphasis is given to toxins falling into a group of selected agents, according to the Centers for Disease Control and Prevention, such as Staphylococcal enterotoxins, Bacillus anthracis toxins, Clostridium botulinum toxins, Clostridium perfringens epsilon toxin, ricin from Ricinus communis, Abrin from Abrus precatorius or control of trade in dual-use items in the European Union, including lesser known protein toxins such as Viscumin from Viscum album. The analysis of protein toxins and monitoring for biological threats, i.e., the deliberate spread of infectious microorganisms or toxins through water, food, or the air, requires rapid and reliable methods for the early identification of these agents.

Simultaneous Detection of Nine Key Bacterial Respiratory Pathogens Using Luminex xTAG® Technology

Early diagnosis and treatment are crucial to the outcome of lower respiratory tract infections (LRTIs). In this study, we developed an assay combining multiplex PCR and Luminex technology (MPLT) for the detection of nine important respiratory bacterial pathogens, which frequently cause LRTIs. These were Streptococcus pneumoniae, Moraxella catarrhalis, Staphylococcus aureus, Streptococcus pyogenes, Haemophilus influenzae, Mycoplasma pneumoniae, Legionella spp., Pseudomonas aeruginosa, and Klebsiella pneumoniae. Through the hybridization reaction between two new synthesized multiplex PCR products and MagPlex-TAG Microspheres, we demonstrate that the detection limits for these nine pathogens were as low as 10²–10³ CFU/mL. Furthermore, 86 clinical bronchoalveolar lavage fluid specimens were used to evaluate this method. Compared with the results of nine simplex real-time PCR reactions targeting these nine pathogens, this MPLT assay demonstrated a high diagnostic accuracy for Streptococcus pneumoniae (sensitivity, 87.5% and specificity, 100%). Furthermore, sensitivity and specificity for the other eight pathogens all attained 100% diagnostic accuracy. In addition, the consistency between MPLT and the nine real-time PCR reactions exceeded 98.8%. In conclusion, MPLT is a high-throughput, labor-saving and reliable method with high sensitivity and specificity for identifying nine respiratory pathogens responsible for LRTIs. Indeed, this assay may be a promising supplement to conventional methods used to diagnose LRTIs.

xMAP Technology: Applications in Detection of Pathogens

xMAP technology is applicable for high-throughput, multiplex and simultaneous detection of different analytes within a single complex sample. xMAP multiplex assays are currently available in various nucleic acid and immunoassay formats, enabling simultaneous detection and typing of pathogenic viruses, bacteria, parasites and fungi and also antigen or antibody interception. As an open architecture platform, the xMAP technology is beneficial to end users and therefore it is used in various pharmaceutical, clinical and research laboratories. The main aim of this review is to summarize the latest findings and applications in the field of pathogen detection using microsphere-based multiplex assays.

Development of a bead-based suspension array for the detection of pathogens in acute respiratory tract infections

We developed a high-throughput bead-based suspension array for simultaneous detection of 20 respiratory tract pathogens in clinical specimens. Pathogen-specific genes were amplified and hybridized to probes coupled to carboxyl-encoded microspheres. Fluorescence intensities generated via the binding of phycoerythrin-conjugated streptavidin with biotin-labeled targets were measured by the Luminex 100 bead-based suspension array system. The bead-based suspension array detected bacteria in a significantly higher number of samples compared to the conventional culture. There was no significant difference in the detection rate of atypical pathogensatypical pathogens or viruses between the bead-based suspension array and real-time PCR. This technology can play a significant role in screening patients with pneumonia.

Simultaneous Detection of Five Pathogens from Cerebrospinal Fluid Specimens Using Luminex Technology

Early diagnosis and treatment are crucial for the outcome of central nervous system (CNS) infections. In this study, we developed a multiplex PCR-Luminex assay for the simultaneous detection of five major pathogens, including Mycobacterium tuberculosis, Cryptococcus neoformans, Streptococcus pneumoniae, and herpes simplex virus types 1 and 2, which frequently cause CNS infections. Through the hybridization reaction between multiplex PCR-amplified targets and oligonucleotide “anti-TAG” sequences, we found that the PCR-Luminex assay could detect as low as 10¹–10² copies of synthetic pathogen DNAs. Furthermore, 163 cerebrospinal fluid (CSF) specimens from patients with suspected CNS infections were used to evaluate the efficiency of this multiplex PCR-Luminex method. Compared with Ziehl-Neelsen stain, this assay showed a high diagnostic accuracy for tuberculosis meningitis (sensitivity, 90.7% and specificity, 99.1%). For cryptococcal meningitis, the sensitivity and specificity were 92% and 97.1%, respectively, compared with the May Grunwald Giemsa (MGG) stain. For herpes simplex virus types 1 and 2 encephalitis, the sensitivities were 80.8% and 100%, and the specificities were 94.2% and 99%, respectively, compared with Enzyme Linked Immunosorbent Assay (ELISA) assays. Taken together, this multiplex PCR-Luminex assay showed potential efficiency for the simultaneous detection of five pathogens and may be a promising supplement to conventional methods for diagnosing CNS infections.

Development of a multiplexed bead-based suspension array for the detection and discrimination of pospiviroid plant pathogens

Efficient and reliable diagnostic tools for the routine indexing and certification of clean propagating material are essential for the management of pospiviroid diseases in horticultural crops. This study describes the development of a true multiplexed diagnostic method for the detection and identification of all nine currently recognized pospiviroid species in one assay using Luminex bead-based suspension array technology. In addition, a new data-driven, statistical method is presented for establishing thresholds for positivity for individual assays within multiplexed arrays. When applied to the multiplexed array data generated in this study, the new method was shown to have better control of false positives and false negative results than two other commonly used approaches for setting thresholds. The 11-plex Luminex MagPlex-TAG pospiviroid array described here has a unique hierarchical assay design, incorporating a near-universal assay in addition to nine species-specific assays, and a co-amplified plant internal control assay for quality assurance purposes. All assays of the multiplexed array were shown to be 100% specific, sensitive and reproducible. The multiplexed array described herein is robust, easy to use, displays unambiguous results and has strong potential for use in routine pospiviroid indexing to improve disease management strategies.

A system to simultaneously detect tick-borne pathogens based on the variability of the 16S ribosomal genes

BACKGROUND

DNA microarrays can be used to quickly and sensitively identify several different pathogens in one step. Our previously developed DNA microarray, based on the detection of variable regions in the 16S rDNA gene (rrs), which are specific for each selected bacterial genus, allowed the concurrent detection of Borrelia spp., Anaplasma spp., Francisella spp., Rickettsia spp. and Coxiella spp.

METHODS

In this study, we developed a comprehensive detection system consisting of a second generation DNA microarray and quantitative PCRs. New oligonucleotide capture probes specific for Borrelia burgdorferi s.l. genospecies and Candidatus Neoehrlichia mikurensis were included. This new DNA microarray system required substantial changes in solution composition, hybridization conditions and post-hybridization washes.

RESULTS

This second generation chip displayed high specificity and sensitivity. The specificity of the capture probes was tested by hybridizing the DNA microarrays with Cy5-labeled, PCR-generated amplicons encoding the rrs genes of both target and non-target bacteria. The detection limit was determined to be 10(3) genome copies, which corresponds to 1-2 pg of DNA. A given sample was evaluated as positive if its mean fluorescence was at least 10% of the mean fluorescence of a positive control. Those samples with fluorescence close to the threshold were further analyzed using quantitative PCRs, developed to identify Francisella spp., Rickettsia spp. and Coxiella spp. Like the DNA microarray, the qPCRs were based on the genus specific variable regions of the rrs gene. No unspecific cross-reactions were detected. The detection limit for Francisella spp. was determined to be only 1 genome copy, for Coxiella spp. 10 copies, and for Rickettsia spp., 100 copies.

CONCLUSIONS

Our detection system offers a rapid method for the comprehensive identification of tick-borne bacteria, which is applicable to clinical samples. It can also be used to identify both pathogenic and endosymbiontic bacteria in ticks for eco-epidemiological studies, tick laboratory colony testing, and many other applications.

Rapid oligonucleotide suspension array-based multiplex detection of bacterial pathogens

A gene-specific microsphere suspension array coupled with 15-plex polymerase chain reaction (PCR) was developed to screen bacterial samples rapidly for 10 strains of bacteria: Shigella spp. (S. flexneri, S. dysenteriae, and S. sonnei), Staphylococcus aureus, Vibrio cholerae (serology O1 and O139), Legionella pneumophila, and Clostridium botulinum (types A, B, and E). Fifteen sets of highly validated primers were chosen to amplify target genes simultaneously. Corresponding oligonucleotide probes directly conjugated with microsphere sets were used to specifically identify PCR amplicons. Sensitivity tests revealed that the array coupled with single PCR was able to detect purified genomic DNA at concentrations as low as 10 copies/μL, while the multiplex detection limit was 10-10⁴ copies/μL. The assay was validated using water samples artificially spiked with S. aureus and S. dysenteriae, as well as water specimens from swimming pools previously identified to contain S. aureus.

Rapid focused sequencing: a multiplexed assay for simultaneous detection and strain typing of Bacillus anthracis, Francisella tularensis, and Yersinia pestis

Background

The intentional release of Bacillus anthracis in the United States in 2001 has heightened concern about the use of pathogenic microorganisms in bioterrorism attacks. Many of the deadliest bacteria, including the Class A Select Agents Bacillus anthracis, Francisella tularensis, and Yersinia pestis, are highly infectious via the pulmonary route when released in aerosolized form. Hence, rapid, sensitive, and reliable methods for detection of these biothreats and characterization of their potential impact on the exposed population are of critical importance to initiate and support rapid military, public health, and clinical responses.

Methodology/Principal Findings

We have developed microfluidic multiplexed PCR and sequencing assays based on the simultaneous interrogation of three pathogens per assay and ten loci per pathogen. Microfluidic separation of amplified fluorescently labeled fragments generated characteristic electrophoretic signatures for identification of each agent. The three sets of primers allowed significant strain typing and discrimination from non-pathogenic closely-related species and environmental background strains based on amplicon sizes alone. Furthermore, sequencing of the 10 amplicons per pathogen, termed “Rapid Focused Sequencing,” allowed an even greater degree of strain discrimination and, in some cases, can be used to determine virulence. Both amplification and sequencing assays were performed in microfluidic biochips developed for fast thermal cycling and requiring 7 µL per reaction. The 30-plex sequencing assay resulted in genotypic resolution of 84 representative strains belonging to each of the three biothreat species.

Conclusions/Significance

The microfluidic multiplexed assays allowed identification and strain differentiation of the biothreat agents Bacillus anthracis, Francisella tularensis, and Yersinia pestis and clear discrimination from closely-related species and several environmental background strains. The assays may be extended to detect a large number of pathogens, are applicable to the evaluation of both environmental and clinical samples, and have the potential to be applied in military, public health, and clinical diagnostic settings.

Liquid bead array technology in the detection of common translocations in acute and chronic leukemias

Hematologic malignancies often have specific chromosomal translocations that promote cancer initiation and progression. Translocation identification is often vital in the diagnosis, prognosis, and treatment of malignancies. A variety of methods including metaphase cytogenetics, in situ hybridization, microarray techniques, Southern blotting, and many variations of PCR are used to identify translocations. While all these techniques have utility, many have drawbacks limiting their clinical usefulness: high cost, slow turnaround time, low density, large sample requirements, high complexity, and difficult validation and standardization. Multiplexed RT-PCR combined with liquid bead array detection overcomes many of these limitations, allowing simultaneous amplification and detection of multiple translocations within one patient sample. This system has high reliability, reproducibility, and flexibility; low cost and low complexity; rapid turnaround time; and appropriate analyte density. Recently, Asuragen Inc. has developed a multiplexed RT-PCR liquid bead array panel that simultaneously analyzes 12 fusion transcripts found in four major types of hematologic malignancies, allowing rapid and efficient diagnosis. In this chapter, we review liquid bead array technology in relation to the specific hematologic translocations analyzed in the Signature LTx panel.

Detection of specific strains of viable bacterial pathogens by using RNA bead assays and flow cytometry with 2100 Bioanalyzer

Bead assays are an emerging microbial detection technology with the capability for rapid detection of extremely low levels of viable pathogens. Such technologies are of high value in clinical settings and in the food industry. Here, we perform a bead assay for extracted 16S rRNA from Escherichia coli (strain K12) with the flow cytometry readout on a 2100 Bioanalyzer, a highly accurate, small-scale flow cytometer system.

Novel genomic tools for specific and real-time detection of biothreat and frequently encountered foodborne pathogens

The bacterial genera Escherichia, Salmonella, Shigella, Vibrio, Yersinia, and Francisella include important food safety and biothreat agents. By extensive mining of the whole genome and protein databases of diverse, closely and distantly related bacterial species and strains, we have identified novel genome regions, which we utilized to develop a rapid detection platform for these pathogens. The specific genomic targets we have identified to design the primers in Francisella tularensis subsp. tularensis, F. tularensis subsp. novicida, Shigella dysenteriae, Salmonella enterica serovar Typhimurium, Vibrio cholerae, Yersinia pestis, and Yersinia pseudotuberculosis contained either known genes or putative proteins. Primer sets were designed from the target regions for use in real-time PCR assays to detect specific biothreat pathogens at species or strain levels. The primer sets were first tested by in silico PCR against whole-genome sequences of different species, subspecies, or strains and then by in vitro PCR against genomic DNA preparations from 23 strains representing six biothreat agents (Escherichia coli O157:H7 strain EDL 933, Shigella dysenteriae, S. enterica serovar Typhi, F. tularensis subsp. tularensis, V. cholerae, and Y. pestis) and six foodborne pathogens (Salmonella Typhimurium, Salmonella Saintpaul, Shigella sonnei, F. tularensis subsp. novicida, Vibrio parahaemolyticus, and Y. pseudotuberculosis). Each pathogen was specifically identifiable at the genus and species levels. Sensitivity assays performed with purified DNA showed the lowest detection limit of 128 fg of DNA/μl for F. tularensis subsp. tularensis. A preliminary test to detect Shigella organisms in a milk matrix also enabled the detection of 6 to 60 CFU/ml. These new tools could ultimately be used to develop platforms to simultaneously detect these pathogens.

Development and comparison of two assay formats for parallel detection of four biothreat pathogens by using suspension microarrays

Microarrays provide a powerful analytical tool for the simultaneous detection of multiple pathogens. We developed diagnostic suspension microarrays for sensitive and specific detection of the biothreat pathogens Bacillus anthracis, Yersinia pestis, Francisella tularensis and Coxiella burnetii. Two assay chemistries for amplification and labeling were developed, one method using direct hybridization and the other using target-specific primer extension, combined with hybridization to universal arrays. Asymmetric PCR products for both assay chemistries were produced by using a multiplex asymmetric PCR amplifying 16 DNA signatures (16-plex). The performances of both assay chemistries were compared and their advantages and disadvantages are discussed. The developed microarrays detected multiple signature sequences and an internal control which made it possible to confidently identify the targeted pathogens and assess their virulence potential. The microarrays were highly specific and detected various strains of the targeted pathogens. Detection limits for the different pathogen signatures were similar or slightly higher compared to real-time PCR. Probit analysis showed that even a few genomic copies could be detected with 95% confidence. The microarrays detected DNA from different pathogens mixed in different ratios and from spiked or naturally contaminated samples. The assays that were developed have a potential for application in surveillance and diagnostics.

Krieger M. A novel hepatitis C virus genotyping method based on liquid microarray

The strategy used to treat HCV infection depends on the genotype involved. An accurate and reliable genotyping method is therefore of paramount importance. We describe here, for the first time, the use of a liquid microarray for HCV genotyping. This liquid microarray is based on the 5'UTR - the most highly conserved region of HCV - and the variable region NS5B sequence. The simultaneous genotyping of two regions can be used to confirm findings and should detect inter-genotypic recombination. Plasma samples from 78 patients infected with viruses with genotypes and subtypes determined in the Versant™ HCV Genotype Assay LiPA (version I; Siemens Medical Solutions, Diagnostics Division, Fernwald, Germany) were tested with our new liquid microarray method. This method successfully determined the genotypes of 74 of the 78 samples previously genotyped in the Versant™ HCV Genotype Assay LiPA (74/78, 95%). The concordance between the two methods was 100% for genotype determination (74/74). At the subtype level, all 3a and 2b samples gave identical results with both methods (17/17 and 7/7, respectively). Two 2c samples were correctly identified by microarray, but could only be determined to the genotype level with the Versant™ HCV assay. Genotype "1" subtypes (1a and 1b) were correctly identified by the Versant™ HCV assay and the microarray in 68% and 40% of cases, respectively. No genotype discordance was found for any sample. HCV was successfully genotyped with both methods, and this is of prime importance for treatment planning. Liquid microarray assays may therefore be added to the list of methods suitable for HCV genotyping. It provides comparable results and may readily be adapted for the detection of other viruses frequently co-infecting HCV patients. Liquid array technology is thus a reliable and promising platform for HCV genotyping.

A multiplex real-time PCR for identifying and differentiating B. anthracis virulent types

Bacillus anthracis is closely related to the endospore forming bacteria Bacillus cereus and Bacillus thuringiensis. For accurate detection of the life threatening pathogen B. anthracis, it is essential to distinguish between these three species. Here we present a novel multiplex real-time PCR for simultaneous specific identification of B. anthracis and discrimination of different B. anthracis virulence types. Specific B. anthracis markers were selected by whole genome comparison and different sets of primers and probes with optimal characteristic for multiplex detection of the B. anthracis chromosome, the B. anthracis pXO1 and pXO2 plasmids and an internal control (IC) were designed. The primer sets were evaluated using a panel of B. anthracis strains and exclusivity was tested using genetically closely related B. cereus strains. The robustness of final primer design was evaluated by laboratories in three different countries using five different real-time PCR thermocyclers. Testing of a panel of more than 20 anthrax strains originating from different locations around the globe, including the recent Swedish anthrax outbreak strain, showed that all strains were detected correctly.

Simultaneous detection of five biothreat agents in powder samples by a multiplexed suspension array

A suspension array-based multiplexed immunoassay was developed for rapid, sensitive, specific, and simultaneous detection of multiple biothreat-associated agents in powder samples. The 5-plexed immunoassays using sets of 9-plexed coupled fluorescent beads were employed to simultaneously detect five representative biothreat agents, including B. anthracis spore, Y. pestis, SARS-CoV, staphylococcal enterotoxin B (SEB) and ricin from a single powder sample and the feasibility for field samples was demonstrated by both blinded and standard laboratory trials. The detection sensitivity and dynamic range for the five biothreat agents from different powders might be varied depending on the nature of the powder and the feature of the contaminating agent. The limit of detection for Y. pestis, B. anthracis spores, SEB, ricin, SARS-CoV N protein in milk powder was 20 cfu, 111 cfu, 110pg, 5.4 ng and 2 ng per test respectively. Compared to conventional ELISA method, the suspension array has a higher sensitive ability, and can detect five biothreat agents simultaneously with high reproducibility.

A rapid multiplex assay for nucleic acid-based diagnostics

We have developed a rapid (under 4 hours), multiplex, nucleic acid assay, adapted to a microsphere array detection platform. We call this assay multiplex oligonucleotide ligation-PCR (MOL-PCR). Unlike other ligation-based assays that require multiple steps, our protocol consists of a single tube reaction, followed by hybridization to a Luminex microsphere array for detection. We demonstrate the ability of this assay to simultaneously detect diverse nucleic acid signatures (e.g., unique sequences, single nucleotide polymorphisms) in a single multiplex reaction. Detection probes consist of modular components that enable target detection, probe amplification, and subsequent capture onto microsphere arrays. To demonstrate the utility of our assay, we applied it to the detection of three biothreat agents, B. anthracis, Y. pestis, and F. tularensis. Combined with the ease and robustness of this assay, the results presented here show a strong potential of our assay for use in diagnostics and surveillance.

Multicolour, multiplex real-time PCR assay for the detection of human-pathogenic poxviruses

After eradication of variola virus, one of the most dangerous infectious diseases affecting mankind, today other poxviruses of different genera can cause infection in humans. These viruses include human-specific molluscipoxviruses as well as zoonotic orthopoxviruses and parapoxviruses. While non-variola orthopoxvirus infections mostly cause mild symptoms in immunocompetent persons, they can evoke severe disease in immunocompromised patients. Since the typical poxviral skin lesions are rarely diagnosed by physicians, PCR-based identification of suspected poxviruses is often required. To simplify the PCR-based diagnosis of human-pathogenic poxviruses, we established a multicolour multiplex real-time PCR that simultaneously detects and differentiates human-pathogenic poxviruses in one reaction. Using 5' nuclease probes labelled with FAM for orthopoxviruses, VIC for parapoxviruses and FAM and VIC for molluscipoxviruses, respectively, amplification of poxviral DNA resulted in a genus-specific reporter-dye profile. Validation with 36 human clinical specimens and DNA of pathogens causing pox-like skin lesions demonstrated the specificity of the assay. Probit analysis revealed a limit of detection of 9.7, 22.08 and 28.1 copies/assay (95% CI) for molluscipoxvirus, orthopoxvirus and parapoxvirus DNA, respectively. The combinatorial multicolour strategy applied has the potential to be used in further applications targeting even more than three pathogens.

Testing and validation of high density resequencing microarray for broad range biothreat agents detection

Rapid and effective detection and identification of emerging microbiological threats and potential biowarfare agents is very challenging when using traditional culture-based methods. Contemporary molecular techniques, relying upon reverse transcription and/or polymerase chain reaction (RT-PCR/PCR) provide a rapid and effective alternative, however, such assays are generally designed and optimized to detect only a limited number of targets, and seldom are capable of differentiation among variants of detected targets. To meet these challenges, we have designed a broad-range resequencing pathogen microarray (RPM) for detection of tropical and emerging infectious agents (TEI) including biothreat agents: RPM-TEI v 1.0 (RPM-TEI). The scope of the RPM-TEI assay enables detection and differential identification of 84 types of pathogens and 13 toxin genes, including most of the class A, B and C select agents as defined by the Centers for Disease Control and Prevention (CDC, Atlanta, GA). Due to the high risks associated with handling these particular target pathogens, the sensitivity validation of the RPM-TEI has been performed using an innovative approach, in which synthetic DNA fragments are used as templates for testing the assay's limit of detection (LOD). Assay specificity and sensitivity was subsequently confirmed by testing with full-length genomic nucleic acids of selected agents. The LOD for a majority of the agents detected by RPM-TEI was determined to be at least 10⁴ copies per test. Our results also show that the RPM-TEI assay not only detects and identifies agents, but is also able to differentiate near neighbors of the same agent types, such as closely related strains of filoviruses of the Ebola Zaire group, or the Machupo and Lassa arenaviruses. Furthermore, each RPM-TEI assay results in specimen-specific agent gene sequence information that can be used to assess pathogenicity, mutations, and virulence markers, results that are not generally available from multiplexed RT-PCR/PCR-based detection assays.

Implications of limits of detection of various methods for Bacillus anthracis in computing risks to human health

Used for decades for biological warfare, Bacillus anthracis (category A agent) has proven to be highly stable and lethal. Quantitative risk assessment modeling requires descriptive statistics of the limit of detection to assist in defining the exposure. Furthermore, the sensitivities of various detection methods in environmental matrices are vital information for first responders. A literature review of peer-reviewed journal articles related to methods for detection of B. anthracis was undertaken. Articles focused on the development or evaluation of various detection approaches, such as PCR, real-time PCR, immunoassay, etc. Real-time PCR and PCR were the most sensitive methods for the detection of B. anthracis, with median instrument limits of detection of 430 and 440 cells/ml, respectively. There were very few peer-reviewed articles on the detection methods for B. anthracis in the environment. The most sensitive limits of detection for the environmental samples were 0.1 CFU/g for soil using PCR-enzyme-linked immunosorbent assay (ELISA), 17 CFU/liter for air using an ELISA-biochip system, 1 CFU/liter for water using cultivation, and 1 CFU/cm(2) for stainless steel fomites using cultivation. An exponential dose-response model for the inhalation of B. anthracis estimates of risk at concentrations equal to the environmental limit of detection determined the probability of death if untreated to be as high as 0.520. Though more data on the environmental limit of detection would improve the assumptions made for the risk assessment, this study's quantification of the risk posed by current limitations in the knowledge of detection methods should be considered when employing those methods in environmental monitoring and cleanup strategies.

Flow Cytometry: A Multipurpose Technology for a Wide Spectrum of Global Biosecurity Applications

Flow cytometry, and its offspring-flow sorting, are extremely useful technologies for biosecurity and public health studies related to infectious disease. Applications range from environmental surveillance of pathogens to diagnosis and the development of vaccines and therapeutics for prevention and control of infectious diseases. Flow cytometers have been developed for laboratory analysis and field deployment. The current state of the art could enjoy more widespread use if instruments and data analysis were made simpler and had more automated functions, and if technology was modified to reduce biosafety concerns related to analysis and sorting of infectious organisms. The full spectrum of possible applications of flow cytometry technology to global biosecurity challenges has not yet been realized.

Discrimination between biothreat agents and 'near neighbor' species using a resequencing array

Timely identification of biothreat organisms from large numbers of clinical or environmental samples in potential outbreak or attack scenario is critical for effective diagnosis and treatment. This study aims to evaluate the potential of resequencing arrays for this purpose. Albeit suboptimal, this report demonstrated that respiratory pathogen microarray version 1 can identify Bacillus anthracis, Francisella tularensis, Yersinia pestis and distinguish them from benign 'near neighbor' species in a single assay. Additionally, the sequence information can discriminate strains and possibly the sources of the strains. With further development, it is possible to use resequencing microarrays for biothreat surveillance.

Development of a multiplexed bead-based assay for detection of DNA methylation in cancer-related genes

Herein we report a method for the detection of methylated CpG dinucleotides located within CpG islands in genomic DNA using multiplexed bead-based assays and standard flow cytometry instrumentation. Four CpG "clusters" were identified in the TFPI2 and SPARC CpG islands whose methylation status was highly correlated with the incidence of invasive cervical cancer in our previous studies. Eight probes in total were designed for both the methylated and unmethylated forms of each cluster and attached to different fluorescently-encoded organosilica bead sets. Probe design was investigated by changing either the length of probes whilst keeping the melting temperature constant, or changing the melting temperature and keeping the probe length constant. Asymmetric polymerase chain reaction (PCR) methods designed without methylation-specific primers were used to prepare fluorescently-labelled targets based on bisulfite-converted genomic DNA. After investigating the specificity of the probes in a model system using fluorescently-labelled synthetic oligonucleotides, cancer cell-line DNA was analysed and the constant length probe design facilitated the correct genotyping of all clusters with respect to negative controls.

Multiplexed molecular assay for rapid exclusion of foot-and-mouth disease

A nucleic acid-based multiplexed assay was developed that combines detection of foot-and-mouth disease virus (FMDV) with rule-out assays for two other foreign animal diseases and four domestic animal diseases that cause vesicular or ulcerative lesions indistinguishable from FMDV infection in cattle, sheep and swine. The FMDV "look-alike" diagnostic assay panel contains 5 PCR and 12 reverse transcriptase PCR (RT-PCR) signatures for a total of 17 simultaneous PCR amplifications for 7 diseases plus incorporating 4 internal assay controls. It was developed and optimized to amplify both DNA and RNA viruses simultaneously in a single tube and employs Luminex liquid array technology. Assay development including selection of appropriate controls, a comparison of signature performance in single and multiplex testing against target nucleic acids, as well of limits of detection for each of the individual signatures is presented. While this assay is a prototype and by no means a comprehensive test for FMDV "look-alike" viruses, an assay of this type is envisioned to have benefit to a laboratory network in routine surveillance and possibly for post-outbreak proof of freedom from foot-and-mouth disease.

Tularemia: current diagnosis and treatment options

Tularemia is an infection caused by Francisella tularensis with a worldwide distribution and diverse clinical manifestations. Limitations in both culture and serologic testing have led to substantial research into new diagnostic techniques and their clinical application, with PCR testing as the best example. This review focuses on the utility of culture, PCR and serologic testing for tularemia. In addition, we also review the evidence to support different therapeutic options for tularemia, highlighting both the most effective supporting evidence for therapeutic recommendations as well as gaps in current knowledge. We conclude the article with suggestions regarding potential areas for future research.

TotalPlex gene amplification using bulging primers for pharmacogenetic analysis of acute lymphoblastic leukemia

Genetic polymorphism among patients with acute lymphoblastic leukemia (ALL) is an important factor in the effectiveness and toxicity of anti-leukemic drugs. Genotyping of various polymorphisms that impact the outcome of anti-leukemic drug therapy (pharmacogenetics) presents an attractive approach for developing individualized therapy. We developed an easy and accurate method of analyzing multiple genes using a small amount of DNA, which we termed TotalPlex amplification. We used 16 pairs of specific bulging specific primers (SBS primers) for simultaneous amplification of 16 loci in a single PCR tube. Sixteen single nucleotide polymorphisms (SNPs) (CYP3A4*1B A>G, CYP3A5*3 G>A, GSTP1 313 A>G, GSTM1 deletion, GSTT1 deletion, MDR1 exon 21 G>T/A, MDR1 exon 26 C>T, MTHFR 677 C>T, MTHFR 1298 A>C, NR3C1 1088 A>G, RFC 80 G>A, TPMT 238 G>C, TPMT 460 G>A, TPMT 719 A>G, VDR intron 8 G>A, VDR FokI T>C) that have been implicated in the pharmacogenetics of ALL therapy were analyzed by TotalPlex amplification and SNP genotyping. We successfully amplified specific gene fragments using 16 pairs of primers in one PCR reaction tube with minimal spurious amplification products using TotalPlex amplification coupled to a multiplexed bead array detection system. The genotypes of 16 loci from 34 different genomic DNA (gDNA) samples derived using the TotalPlex system were consistent with the results of several standard genotyping methods, including automatic sequencing, PCR restriction fragment length polymorphism (RFLP) analysis, PCR, and allele-specific PCR (AS-PCR). Thus, the TotalPlex system represents a useful method of amplification that can improve the time, cost, and sample size required for high-throughput pharmacogenetic analysis of SNPs.

Simultaneous real-time PCR detection of Bacillus anthracis, Francisella tularensis and Yersinia pestis

This report describes the development of in-house real-time PCR assays using minor groove binding probes for simultaneous detection of the Bacillus anthracis pag and cap genes, the Francisella tularensis 23 KDa gene, as well as the Yersinia pestis pla gene. The sensitivities of these assays were at least 1 fg, except for the assay targeting the Bacillus anthracis cap gene, which showed a sensitivity of 10 fg when total DNA was used as a template in a serial dilution. The clinical value of the Bacillus anthracis- and Francisella tularensis-specific assays was demonstrated by successful amplification of DNA from cases of cow anthrax and hare tularemia, respectively. No cross-reactivity between these species-specific assays or with 39 other bacterial species was noted. These assays may provide a rapid tool for the simultaneous detection and identification of the three category A bacterial species listed as biological threats by the Centers for Disease Control and Prevention.

Application of multiplex bead array assay for Yq microdeletion analysis in infertile males

The purpose of this study was to apply the multiplex bead array as a diagnostic tool for male infertility. The multiplex bead array offers a new platform in high-throughput nucleic acid detection. Six loci, including sex-determining regions on the Y (SRY) chromosome as a control and five sequence-tagged sites (STS) in azoospermia-factor regions, were used in this system. Extracted genomic DNA from infertile male blood was used for multiplex polymerase chain reaction (PCR). After multiplex PCR using specific Cy3-labeled primer sets, the PCR product was hybridized with capture probes. A multiplexed PCR-liquid bead was arrayed for simultaneous detection using the Luminex system. This assay system correctly identified the presence or deletion of the Y chromosome. Therefore, this method provides a sensitive and high-throughput method for probing the deletion of the Y chromosome, and offers a completely new approach to male infertility screening.

Identification of genotypically diverse Cryptococcus neoformans and Cryptococcus gattii isolates by Luminex xMAP technology

A Luminex suspension array, which had been developed for identification of Cryptococcus neoformans and Cryptococcus gattii isolates, was tested by genotyping a set of 58 mostly clinical isolates. All genotypes of C. neoformans and C. gattii were included. In addition, cerebrospinal fluid (CSF) obtained from patients with cryptococcal meningitis was used to investigate the feasibility of the technique for identification of the infecting strain. The suspension array correctly identified haploid isolates in all cases. Furthermore, hybrid isolates possessing two alleles of the Luminex probe region could be identified as hybrids. In CSF specimens, the genotype of the cryptococcal strains responsible for infection could be identified after optimization of the PCR conditions. However, further optimization of the DNA extraction protocol is needed to enhance the usability of the method in clinical practice.

Microcoding and flow cytometry as a high-throughput fungal identification system for Malassezia species

Yeasts of the genus Malassezia have been associated with a variety of dermatological disorders in humans and domestic animals. With the recent recognition of new members of the genus, new questions are emerging with regard to the pathogenesis and epidemiology of the new species. As new species are recognized, a precise and comprehensive identification system is needed. Herein is described a bead suspension culture-based array that combines the specificity and reliability of nucleic acid hybridization analysis with the speed and sensitivity of the Luminex analyser. The developed 16-plex array consisted of species- and group-specific capture probes that acted as 'microcodes' for species identification. The probes, which were designed from sequence analysis in the D1/D2 region of rRNA and internal transcribed spacer (ITS) regions, were covalently bound to unique sets of fluorescent beads. Upon hybridization, the biotinylated amplicon was detected by the addition of a fluorochrome coupled to a reporter molecule. The hybridized beads were subsequently analysed by flow cytometric techniques. The developed array, which allowed the detection of species in a multiplex and high-throughput format, was accurate and fast, since it allowed precise identification of species and required less than 1 h following PCR amplification. The described protocol, which can integrate uniplex or multiplex PCR reactions, permitted the simultaneous detection of target sequences in a single reaction, and allowed single mismatch discrimination between probe and non-target sequences. The assay has the capability to be expanded to include other medically important pathogenic species in a single or multiplex array format.

Current methods for the rapid diagnosis of bioterrorism-related infectious agents

Bioterrorism is the calculated use of violence against civilians to attain political, religious, or ideologic goals using weapons of biological warfare. Bioterrorism is of particular concern because these weapons can be manufactured with ease and do not require highly sophisticated technology. Moreover, biologic agents can be delivered and spread easily and can effect a large population and geographic area. The terrorist attacks occurring around the world necessitate society's continued investment in adequate defense against these unpredictable and irrational events.

Multiplexed Detection of Antibodies to Nonstructural Proteins of Foot-and-Mouth Disease Virus

Liquid array technology was used to develop a multiplexed assay for the detection of antibodies to viral nonstructural proteins (NSPs), raised in cattle in response to infection with foot-and-mouth disease (FMD) virus. Two assays, one based on recombinant NSPs and the other on synthetically produced peptides, were developed and compared side-by-side. Serum samples from serial bleeds of cattle, each experimentally infected with one of the seven serotypes (C, A, O, Asia, SAT1, SAT2, SAT3) of FMD virus were analyzed. A distinct pattern in the detection of NSP antibodies and a close correlation of the recombinant protein and peptide-based assays were observed. The detection of antibodies to NSPs is a method to differentiate FMD-infected and FMD-vaccinated animals, and a high-throughput assay would be an invaluable tool in the case of an outbreak of FMD in North America, when emergency vaccination may be utilized to spare vaccinated, noninfected animals from slaughter and subsequent disposal.

DNA probes for the rapid identification of medically important Candida species using a multianalyte profiling system

Recently, a new flow cytometric technology to detect multiple DNA target sequences in a single microtiter well plate was developed [multianalyte profiling (MAP) System, Luminex Corp., Austin, TX]. DNA probes, directed to the internal transcribed spacer 2 region of ribosomal DNA, were therefore designed to detect and differentiate PCR amplicons from six medically important Candida species using this system. Each probe was covalently linked to one of 100 available microsphere (bead) sets. Biotinylated PCR amplicons were then hybridized to the complementary probe on each bead set. Bound amplicons were detected fluorometrically using a streptavidin-linked reporter dye, R-phycoerythrin. Specific hybridization was noted for all six Candida species probes (mean sample-to-background ratio+/-standard error: Candida albicans, 58.7+/-1.2; Candida tropicalis, 53.2+/-3.8; Candida glabrata, 46.9+/-2.1; Candida parapsilosis, 59.9+/-1.6; Candida krusei, 54.7+/-3.7 vs. 0.9+/-0.03 for all heterologous Candida species DNA targets and vs. 1.0+/-0.1 for samples containing water instead of DNA; P < 0.001). The limit of test sensitivity was 0.5 pg of DNA. A sample could be processed and analyzed within 1 h post-PCR amplification. Therefore, the multianalyte profiling system was rapid, sensitive and specific for the detection and differentiation of the most medically important species of Candida.

Suspension microarray with dendrimer signal amplification allows direct and high-throughput subtyping of Listeria monocytogenes from genomic DNA

Listeria monocytogenes is a significant cause of food-borne disease and mortality; therefore, epidemiological investigations of this pathogen require subtyping methods that are rapid, discriminatory, and reproducible. Although conventional microarray subtyping analysis has been shown to be both high resolution and genetically informative, it is still relatively low throughput and technically challenging. Suspension microarray technology eliminates the technical issues associated with planar microarrays and allows high-throughput subtyping of L. monocytogenes strains. In this study, a suspension array assay using dendrimer signal amplification allowed rapid and accurate serovar identification of L. monocytogenes strains using genomic DNA as a target. The ability to subtype genomic DNA without PCR amplification allows probes to be designed for many different regions within the bacterial genome and should allow high-resolution subtyping not possible with multiplex PCR.