Structure influence of hyperbranched polyester on structure and properties of synthesized nanofiltration membranes

Design of Microstructure-Engineered Polymers for Energy and Environmental Conservation

With the ever-growing demand for sustainability, designing polymeric materials using readily accessible feedstocks provides potential solutions to address the challenges in energy and environmental conservation. Complementing the prevailing strategy of varying chemical composition, engineering microstructures of polymer chains by precisely controlling their chain length distribution, main chain regio-/stereoregularity, monomer or segment sequence, and architecture creates a powerful toolbox to rapidly access diversified material properties. In this Perspective, we lay out recent advances in utilizing appropriately designed polymers in a wide range of applications such as plastic recycling, water purification, and solar energy storage and conversion. With decoupled structural parameters, these studies have established various microstructure-function relationships. Given the progress outlined here, we envision that the microstructure-engineering strategy will accelerate the design and optimization of polymeric materials to meet sustainability criteria.

Removal of natural organic matter from surface water sources by nanofiltration and surface engineering membranes for fouling mitigation - A review

Given that surface water is the primary supply of drinking water worldwide, the presence of natural organic matter (NOM) in surface water presents difficulties for water treatment facilities. During the disinfection phase of the drinking water treatment process, NOM aids in the creation of toxic disinfection by-products (DBPs). This problem can be effectively solved using the nanofiltration (NF) membrane method, however NOM can significantly foul NF membranes, degrading separation performance and membrane integrity, necessitating the development of fouling-resistant membranes. This review offers a thorough analysis of the removal of NOM by NF along with insights into the operation, mechanisms, fouling, and its controlling variables. In light of engineering materials with distinctive features, the potential of surface-engineered NF membranes is here critically assessed for the impact on the membrane surface, separation, and antifouling qualities. Case studies on surface-engineered NF membranes are critically evaluated, and properties-to-performance connections are established, as well as challenges, trends, and predictions for the field's future. The effect of alteration on surface properties, interactions with solutes and foulants, and applications in water treatment are all examined in detail. Engineered NF membranes containing zwitterionic polymers have the greatest potential to improve membrane permeance, selectivity, stability, and antifouling performance. To support commercial applications, however, difficulties related to material production, modification techniques, and long-term stability must be solved promptly. Fouling resistant NF membrane development would be critical not only for the water treatment industry, but also for a wide range of developing applications in gas and liquid separations.

A review on polyester and polyester-amide thin film composite nanofiltration membranes: Synthesis, characteristics and applications

Nanofiltration (NF) membranes have been widely used in various fields including water treatment and other separation processes, while conventional thin film composite (TFC) membranes with polyamide (PA) selective layers suffer the problems of fouling and chlorine intolerance. Due to the abundant hydrophilic hydroxyl groups and ester bonds free from chlorine attack, the TFC membranes composed of polyester (PE) or polyester-amide (PEA) selective layers have been proven to possess enhanced anti-fouling properties and superior chlorine resistance. In this review, the research progress of PE and PEA nanofiltration membranes is systematically summarized according to the variety of hydroxyl-containing monomers for membrane fabrication by the interfacial polymerization (IP) reaction. The synthesis strategies as well as the mechanisms for tailoring properties and performance of PE and PEA membranes are analyzed, and the membrane application advantages are demonstrated. Moreover, current challenges and future perspectives of the development of PE and PEA nanofiltration membranes are proposed. This review can offer guidance for designing high-performance PE and PEA membranes, thereby further promoting the efficacy of nanofiltration.

Improvement in Acid Resistance of Polyimide Membranes: A Sustainable Cross-Linking Approach via Green-Solvent-Based Fenton Reaction

In this study, we present a facile surface modification method using green solvents for a commercial polyimide (PI) nanofiltration membrane to exhibit good acid stability. To enhance acid stability, the PI organic solvent nanofiltration membrane was modified using Fenton's reaction, an oxidative cross-linking process, using environmentally friendly solvents: water and ethanol. The surface properties of the pristine and modified PI membranes were investigated and compared using various analytical tools. We studied the surface morphology using scanning electron microscopy, performed elemental analysis using X-ray photoelectron spectroscopy, investigated chemical bonds using attenuated total reflectance-Fourier transform infrared spectroscopy, and studied thermal stability using thermogravimetric analysis. The acid resistances of the pristine and modified membranes were confirmed through performance tests. The pristine PI nanofiltration membrane exposed to a 50 w/v% sulfuric acid for 4 h showed an increase in the normalized water flux to 205% and a decrease in the MgSO₄ normalized rejection to 44%, revealing damage to the membrane. The membrane modified by the Fenton reaction exhibited a decline in flux and improved rejection, which are typical performance changes after surface modification. However, the Fenton-modified membrane exposed to 50 w/v% sulfuric acid for 4 h showed a flux increase of 7% and a rejection increase of 4%, indicating improved acid resistance. Furthermore, the Fenton post-treatment enhanced the thermal stability and organic solvent resistance of the PI membrane. This study shows that the acid resistance of PI membranes can be successfully improved by a novel and facile Fenton reaction using green solvents.

A high stability GO nanofiltration membrane preparation by co-deposition and crosslinking polydopamine for rejecting dyes

In order to improve the stability of nanofiltration membrane in separation and purification, a novel polyelectrolyte multilayer nanofiltration membrane was facilely prepared by co-deposition of polydopamine (PDA) and polyethyleneimine (PEI) on the polyethersulfone (PES) ultrafiltration membrane substrate, followed by immersing graphene oxide (GO) solution, and crosslinking PDA. The modified surfaces were characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM), water contact angle, their saline flux and ability to reject salt and dye were determined. The results also exhibited salt rejection ability as Na₂SO₄ > K₂SO₄ > MgSO₄ > NaCl > KCl > MgCl₂, suggesting the higher rejection of divalent anion. Also, the retention order of the dye by the GO modified membrane is DY86 > DB19 > AG27 > DY142 > DB56 > AR151 > VB5, indicating that the GO modified membrane has better rejection of negatively charged dyes as well as higher molecular weight dyes. Ethanol and hypochlorite resistance tests under different pH conditions showed the membranes coated GO enhanced stability in regard to salt rejection properties. Significantly, the anti-biological test confirmed the growth rate of microalgae on the GO introduced membrane was decreased greatly due to enhanced stability and lower roughness.

Novel Thin Film Nanocomposite Forward Osmosis Membranes Prepared by Organic Phase Controlled Interfacial Polymerization with Functional Multi-Walled Carbon Nanotubes

Novel high-quality thin film nanocomposite (TFN) membranes for enhanced forward osmosis (FO) were first synthesized through organic phase controlled interfacial polymerization by utilizing functional multi-walled carbon nanotubes (MWCNTs). As 3-aminopropyltriethoxysilane (APTES) grafted MWCNTs via an amidation reaction significantly promoted the dispersion in organic solution, MWCNTs-APTES with better compatibility effectively restricted the penetration of trimesoyl chloride (TMC), thus adjusting the morphology and characters of TFN membranes. Various techniques such as Fourier transform infrared spectra (FTIR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), sessile droplet analysis and FO experiments and reverse osmosis (RO) operation were taken to characterize and evaluate the performance of nanocomposites and membranes. The prepared TFN FO membranes exhibited good hydrophilicity and separation efficiency, in which water flux was about twice those of thin film composite (TFC) membranes without MWCNTs-APTES in both AL-DS and AL-FS modes. Compared with the original TFC membrane, the membrane structural parameter of the novel TFN FO membrane sharply was cut down to 60.7%. Based on the large number of low mass-transfer resistance channels provided by functional nanocomposites, the progresses may provide a facile approach to fabricate novel TFN FO membranes with advanced selectivity and permeability.

A Novel Thin-Film Nanocomposite Nanofiltration Membrane by Incorporating 3D Hyperbranched Polymer Functionalized 2D Graphene Oxide

In order to develop a high-performance thin-film nanocomposite (TFN) nanofiltration (NF) membrane, the functionalized graphene-based nanomaterial (GO-HBE-COOH) was synthesized by combining two-dimensional graphene oxide (GO) with a three-dimensional hyperbranched polymer, which was used as the novel nanofiller and successfully embedded into the polypiperazine-amide (PPA) active layers on polysulfone (PSU) substrates via interfacial polymerization (IP) process. The resultant NF membranes were characterized using ATR-FTIR, SEM, and AFM, while their performance was evaluated in terms of water flux, salt rejection, antifouling ability, and chlorine resistance. The influence of GO-HBE-COOH concentration on the morphologies, properties, and performance of TFN NF membranes was investigated. With the addition of 60 ppm GO-HBE-COOH, the TFN-GHC-60 NF membrane exhibited the optimal water flux without a sacrifice of the salt rejection. It was found that the introduction of GO-HBE-COOH nanosheets favored the formation of a thinner and smoother nanocomposite active layer with an enhanced hydrophilicity and negative charge. As a result, TFN NF membranes demonstrated a superior permeaselectivity, antifouling ability, and chlorine resistance over the conventional PPA thin-film composite (TFC) membranes.

The effect of phenol functionality on the characteristic features and performance of fully aromatic polyester thin film composite nanofiltration membranes

The functionality of phenolic monomers affects the properties and performance of the fully aromatic TFC nanofiltration membrane.

Hyperbranched polymers: advances from synthesis to applications

This review summarizes the advances in hyperbranched polymers from the viewpoint of structure, click synthesis and functionalization towards their applications in the last decade.