Gravity-driven catalytic nanofibrous membranes prepared using a green template

New progress in the deep understanding of the biocake layer property: Combined effect of neglected protein secondary structure, morphology, and mechanism

The application of magnetic fields (MFs) and magnetic particles (MPs) in water treatment has attracted widespread attention due to their stability, strong biological compatibility, and less chemical consumption. This study introduced MPs and MFs to GDM and probed their effects on filtration performance. Predeposited large MPs (P-large) and batch-added little MPs (B-little) intervened biocake layer development, forming more open and porous structures, they also reduced biomass secretion, resulting in flux increases of 13 % in P-large and 40 % in B-little than P-little, respectively. Besides, MFs controlled MPs distribution on the biocake layer, resulting in forming of more rough and open structures. A relatively lower magnetic field of 20 mT facilitated biomass secretion, while a higher magnetic field of 50 mT decreased biomass. Furthermore, applying magnetic fields decreased the ratios of α-helix and β-sheet, and increased random coil percentage. Thus, applying magnetic field mediation would contribute to the flux improvements in I-20 and I-50 by 29 % and 32 % relative to I-0. Economic analysis suggested introducing MPs and MFs to GDM was economically feasible, synergy of MPs and MFs had more economic advantages on the community scale and MPs-assisted GDM had significant economic advantages on both community and household scales. Future works should focus on developing new technologies for the recycling of MPs and membranes. This study provided new insight into the protein secondary structures associated with GDM performance and would encourage new sustainable MFs and MPs-assisted GDM technological developments.

Catalytic Membrane Nanoreactor with Cu-Agx Bimetallic Nanoparticles Immobilized in Membrane Pores for Enhanced Catalytic Performance

A catalytic membrane nanoreactor (CMNR) with Cu-Ag_x (where x is the millimolar concentration of AgNO₃) bimetallic catalysts immobilized in membrane pores has been fabricated via coupling flowing synthesis and replacement reaction. Surface characterization by transmission electron microscopy (TEM) gives obvious evidence of the formation of Cu-Ag bimetallic core-shell nanostructures with Ag islands deposited on the Cu core metal. An apparent high shift phenomenon for the Cu element and a low shift phenomenon for the Ag element was determined by X-ray photoelectron spectroscopy (XPS), indicating a close interaction with the transfer of electron density from the Cu atom to the Ag atom. The hydrogenation catalysis of p-nitrophenol (p-NP) was tested to evaluate the catalytic performance. During the catalytic process, the Cu core acts as an electron-deficient site to adsorb and activate the -NO₂ group for p-NP, and the Ag shell is beneficial for enhancing active H spilling to the Cu surface and then performing hydrogenation. A volcano-shaped apparent reaction rate constant can be achieved, which rises initially with the increasing Ag content and subsequently drops with a further increase in the Ag content. The highest value of 1071 min^-1 can be achieved for CMNR immobilized with Cu-Ag₂ owing to the suitable adsorption activation behavior and the best hydrogen spillover behavior.

Reversible filtration redox of methylene blue in dimethylsulfoxide by manganese oxide loaded carbonaceous nanofibrous membrane through Fenton-like oxidation

The reversible redox of methylene blue in organic solvents was highly attractive, yet was rarely reported. In this study, we realized the continuous filtration redox of methylene blue (MB) in dimethylsulfoxide (DMSO) through Fenton-like oxidization by using MnO₂ loaded carbonaceous nanofibrous membrane (cPAN-MnO₂). The carbonaceous nanofibrous membrane (cPAN) was fabricated through electrospun of polyacrylonitrile and subsequent carbonization. The obtained cPAN nanofibrous membrane showed excellent stability in polar DMSO. MnO₂ can be readily coated on cPAN nanofibers through an in situ redox reaction between cPAN and potassium permanganate. The fabricated cPAN-MnO₂ membrane exhibited instantaneous reduction property towards MB in DMSO during a gravity-driven continuous filtration process. Interestingly, MB reduction was initiated by a typical Fenton-like oxidization, where hydroxyl radicals were firstly generated from hydrogen peroxide catalyzed by MnO₂ in DMSO. Then hydroxyl radicals attacked DMSO to further produce methyl radicals, which resulted in the reduction of MB. In addition, MB reduction process in DMSO was reversible. Our study provides a novel strategy for continuous redox of MB in polar organic solvent and might give new ideas for MB applications.

Zn-rich (GaN)1−x(ZnO)x: a biomedical friend?

The synthesis of (GaN)_1−x(ZnO)_x with the assistance of high-gravity using a green approach for the first time, with the application of delivering pCRISPR.

Fabrication and catalytic performance of a novel tubular PMIA/Ag@RGO nanocomposite nanofiber membrane

A novel tubular PMIA/Ag@RGO composite nanofiber membrane, which could be used in continuous catalysis process was fabricated via a facile and effective method.

Functional catalytic membrane development: A review of catalyst coating techniques

Catalytic membranes combine catalytic activity with conventional filtration membranes, thus enabling diverse attractive benefits into the conventional membrane filtration processes, such as easy catalyst reuse, antifouling, anti-microbial, and enhancing process efficiency. Up to date, tremendous progresses have been made on functional catalytic membrane preparation and applications, which significantly advances the competitiveness of membrane technologies in process industries. The present article provides a critical and holistic overview of the current state of knowledge on existing catalyst coating techniques for functional catalytic membrane development. Based on coating mechanisms, the techniques are generally categorized into physical and chemical surface coating routes. For each technique, we first introduce fundamental principle, followed by a critical discussion of their applications with representative case studies. Advantages and drawbacks are also emphasized for different surface coating technologies. Finally, future perspectives are highlighted to provide deep insights into their future developments.

Synergistic oxidation - filtration process analysis of catalytic CuFe2O4 - Tailored ceramic membrane filtration via peroxymonosulfate activation for humic acid treatment

This work synthesized catalytic CuFe₂O₄ tailored ceramic membrane (CuFeCM), and systematically investigated the intercorrelated oxidation - filtration mechanism of peroxymonosulfate (PMS)/CuFeCM catalytic filtration for treating humic acid (HA). PMS/CuFeCM filtration exhibited enhanced HA removal efficiency while reduced the irreversible fouling resistance as compared with the conventional CM filtration. Results from HA characterizations showed that PMS/CuFeCM catalytic filtration oxidized HA into conjugated structures of smaller molecular weight. The unsaturated bonds further caused the re-agglomeration of HA, hence enhancing the size exclusion of CuFeCM. Meanwhile, oxidized HA particles with changing physicochemical properties reduced the total attractive interaction energy between CuFeCM and HA, mainly attributed to the reduced acid-base interaction energy according to the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) analysis. The changing of HA properties and HA-CuFeCM physicochemical interactions rendered more re-agglomerated HA particles retained above membrane with less attachment, which induced decreasing irreversible fouling resistance and facilitated easier external fouling removal by hydraulic cleaning. Overall, the PMS/CuFeCM configuration demonstrated in this study could provide a new insight into the synergistic oxidation - filtration interaction mechanism of hybrid catalytic ceramic membrane filtration process.

Gravity-driven catalytic nanofibrous membrane with microsphere and nanofiber coordinated structure for ultrafast continuous reduction of 4-nitrophenol

Silver loaded nanofibrous membrane with high catalytic performance for 4-nitrophenol under continuous gravity-driven filtration was developed in this study. A polydopamine (PDA) microsphere and nanofiber coordinated composite structure was fabricated through an in situ PDA synthesis to achieve a high catalyst loading and controllable residence time of 4-nitrophenol. The incorporated PDA microspheres played an important role for the enhancement of catalytic performance due to the increased surface area (23% increase compared with PAN and PAN-PDAs-Ag) and reduced membrane porosity. Silver loading amount and the residence time of 4-nitrophenol was increased by more than 108% (from 1.2 wt% to 2.5 wt%) and 45% (from 0.79 s to 1.15 s) when comparing with PAN-PDAc-Ag and PAN-PDAs-Ag nanofibrous membrane. The conversion rate of 4-nitrophenol in a gravity-driven filtration process was as high as 97% when PAN-PDAs-Ag nanofibrous membrane was used, which was much higher than the PAN-PDAc-Ag membrane (80%). In addition, the PAN-PDAs-Ag nanofibrous membrane exhibited excellent recycle performance, the conversion rate was maintained as high as 93% after five times of reuse. The microsphere and nanofiber coordinated structure with enhanced surface area and controllable residence time of contaminants proposed in this study might advance the real applications of electrospun nanofibrous membrane for catalytic removal of contaminants.

Interaction Analysis between Gravity-Driven Ceramic Membrane and Smaller Organic Matter: Implications for Retention and Fouling Mechanism in Ultralow Pressure-Driven Filtration System

Gravity-driven membranes (GDM) generally achieve high retention performance in filtration of organic matter with a smaller size than the membrane pore, yet the in-depth mechanism remains unclear. Thorough analysis of the retention mechanism is crucial for optimizing GDM properties and improving GDM filtration performance. The performance and interaction mechanism of gravity-driven ceramic membrane (GDCM) filtrating smaller organic matter (SOM) were systematically studied. Rejection rate grew noticeably for like-charged foulant, whereas it only grew slightly for opposite-charged foulant as operation height decreased. Flux declined more seriously at lower operation height, probably due to heavier cake fouling caused by the rejected foulant. Interactions of ceramic membrane-SOM were analyzed through extended Derjaguin-Landau-Verwey-Overbeek theory (XDLVO) and hydrodynamic permeation drag (PD). Among van der Waals (LW), acid-base (AB), and electrostatic (EL) forces in XDLVO, EL played a significant role on GDCM filtrating SOM, and altering membrane electrostatic property could greatly influence SOM filtration. Furthermore, the rising PD force largely weakened the EL dominant zone with operation height increasing, while barely influencing the LW and AB dominant zones. Therefore, the weakened EL-dominant repulsive zone caused less rejection of like-charged foulant with operation height increasing. Fe₂O₃- and MnO₂-modified membranes further validated the comprehensive influence of LW, AB, EL, and PD interactions on GDCM filtration. The possible "trade-off" of pore blocking-cake fouling with operation height decreasing demonstrated potential enhancement for both rejection and antifouling performance by electrically modified membrane under ultralow pressure. This study provides insight on membrane selection/preparation/modification and performance control of ultralow pressure-driven filtration.

Free-standing hierarchical α-MnO2@CuO membrane for catalytic filtration degradation of organic pollutants

Catalytic membrane, due to its compact reactor assembling, high catalytic performance as well as low energy consumption, has proved to be more attractive for wastewater treatment. In this work, a free-standing α-MnO₂@CuO membrane with hierarchical nanostructures was prepared and evaluated as the catalytic membrane to generate radicals from peroxymonosulfate (PMS) for the oxidative degradation of organic dyes in aqueous solution. Benefiting from the high mass transport efficiency and the hierarchical nanostructures, a superior catalytic activity of the membrane was observed for organic dyes degradation. As a typical organic dye, more than 99% of methylene blue (MB) was degraded within 0.23 s using dead-end filtration cell. The effects of flow rate, PMS concentration and buffer solution on MB degradation were further investigated. Besides MB, the catalytic membrane also showed excellent performance for the removal of other dyes, such as congo red, methyl orange, rhodamine B, acid chrome blue K and malachite green. Moreover, the mechanism study indicated that OH and SO₄^- generated from the interaction between PMS and Mn/Cu species with different oxidation states mainly accounted for the dyes degradation. The catalytic filtration process using α-MnO₂@CuO catalytic membrane could provide a novel method for wastewater purification with high efficiency and low energy consumption.

A One-Step Rapid Assembly of Thin Film Coating Using Green Coordination Complexes for Enhanced Removal of Trace Organic Contaminants by Membranes

We report a fast, simple, and green coating method using the coordination complex of tannic acid (TA) and ferric ion (Fe³⁺) to enhance the removal of trace organic contaminants (TrOCs) by polyamide membranes. The entire coating process can be completed in less than 2 min; quartz crystal microbalance characterization revealed that a TA-Fe thin film formed in merely 10-20 s. Coating this TA-Fe thin film on a commercial nanofiltration membrane (NF270) reduced its effective pore size from 0.44 to 0.40 nm. The TA-Fe-coated NF270 showed significantly increased rejection of both NaCl and trace organic contaminants. In comparison with the more-time-consuming polydopamine coating (e.g., 0.5 h), the TA-Fe coating presented greater resistance to TrOC permeation (i.e., lower permeability of TrOCs). The advantages of the fast coating process, greatly improved rejection performance, and use of green accessible materials make TA-Fe a highly promising coating material for large-scale applications.

A novel gravity-driven nanofibrous membrane for point-of-use water disinfection: polydopamine-induced in situ silver incorporation

We report a facile method for preparing silver-loaded membranes for point-of-use disinfection and disaster relief applications. A bio-inspired material, polydopamine, was coated onto a highly porous nanofibrous polyacrylonitrile substrate. We then take advantage of the redox properties of polydopamine to form silver nanoparticles in situ. These nanoparticles were uniformly distributed on the surface of nanofibers with no apparent agglomeration at a silver loading up to 4.36 wt.% (cPAN-Ag1.5). The silver-incorporated membrane cPAN-Ag1.5 achieved a high pure water flux of 130 Lm⁻² h⁻¹ at 10-cm water head, demonstrating the feasibility of energy-efficient gravity-driven filtration and eliminating the need for electrical power. The strong anti-bacterial activity and high physical rejection of the membrane led to an excellent disinfection power, with no viable bacterial cells detected in its permeate water. The membrane exhibited >7 log reduction for E. coli and >6 log reduction for B. subtilis. The strategy reported here provides an efficient and green route to synthesize point-of-use membranes. Combining their excellent permeability and disinfection effectiveness, these membranes offer an ideal solution to water supply in disaster-affected areas.