Constructing membrane surface with synergistic passive antifouling and active antibacterial strategies through organic-inorganic composite modifier

Surface Segregation Methods toward Molecular Separation Membranes

As a highly promising approach to solving the issues of energy and environment, membrane technology has gained increasing attention in various fields including water treatment, liquid separations, and gas separations, owing to its high energy efficiency and eco-friendliness. Surface segregation, a phenomenon widely found in nature, exhibits irreplaceable advantages in membrane fabrication since it is an in situ method for synchronous modification of membrane and pore surfaces during the membrane forming process. Meanwhile, combined with the development of synthesis chemistry and nanomaterial, the group has developed surface segregation as a versatile membrane fabrication method using diverse surface segregation agents. In this review, the recent breakthroughs in surface segregation methods and their applications in membrane fabrication are first briefly introduced. Then, the surface segregation phenomena and the classification of surface segregation agents are discussed. As the major part of this review, the authors focus on surface segregation methods including free surface segregation, forced surface segregation, synergistic surface segregation, and reaction-enhanced surface segregation. The strategies for regulating the physical and chemical microenvironments of membrane and pore surfaces through the surface segregation method are emphasized. The representative applications of surface segregation membranes are presented. Finally, the current challenges and future perspectives are highlighted.

In situ reaction enabled surface segregation toward dual-heterogeneous antifouling membranes for oil-water separation

Fabricating membranes with superior antifouling property and long-term high performance is in great demand for efficient oil-water separation. Herein, we reported a reaction enabled surface segregation method for antifouling membrane fabrication, in which the pre-synthesized fluorinated ternary copolymer Pluronic F127 was coordinated with Ti4+ as segregation additive in the membrane casting bath. Additionally, tannic acid was utilized to enhance the self-assembly of the copolymer in the coagulation bath, and freshly-biomineralized TiO2 was anchored into the membrane surface through hydrogen bond. A hydrogel layer was constructed onto the membrane surface with synergistically tailored heterogeneous chemical composition and heterogeneous geometrical roughness. The dual-heterogeneous membrane exhibited hydrophilic and underwater superoleophobic features, resulting in high water flux (621.7 L m-2 h-1) at low operation pressure of 0.05 MPa and an excellent antifouling property (only 4.8% flux decline during 24-hour filtration). In situ reaction enabled surface segregation method will accelerate the development of antifouling membranes for oil-in-water emulsion separation.

Constructing Janus Microsphere Membranes for Particulate Matter Filtration, Directional Water Vapor Transfer, and High-Efficiency Broad-Spectrum Sterilization

Commercial masks have significant drawbacks, including low water vapor transmission efficiency and limited ability to inhibit harmful microorganisms, whereas in this contribution, a series of Janus microsphere membranes are developed with hierarchical structures by quenching and crystallizing 12-hydroxystearic acid and halicin layer-by-layer on a polypropylene non-woven fabric, laminating them with hydrophilic cotton fibers in a one-pot process, and further demonstrate the potential of this composite system as masks. Through further optimization, excellent superhydrophobic/superhydrophilic properties (contact angle 157.1°/0°), superior filtering effects (93.54% for PM_2.5 and 98.35% for PM₁₀ ), with a low-filtration resistance (57 Pa) and a quality factor of up to 0.072 Pa^-1 are achieved, all better than that of commercial N95 masks. In addition, the membrane allows for the directional transport of water vapor from the inside out, increasing the water vapor transmission rate by more than 20% compared with the monolayer hydrophobic microsphere membrane. It also has a bactericidal capacity of over 99.9999% against Escherichia coli and is tested for robustness and stability in various extreme environments. This work may shed light on designing novel filter media with versatile functions, meanwhile, the materials can also be used in protective equipment against the new coronavirus.

A passive-active combined strategy for ultrafiltration membrane fouling control in continuous oily wastewater purification

Membrane-based technology has been confirmed as an effective way to treat emulsified oily wastewater, however, membrane fouling is still one of practical challenges in long-term operation. Herein, a novel passive-active combined strategy was proposed to control membrane fouling in continuous oily wastewater purification, where the δ-MnO₂ decoration layer helped to reduce the total fouling ratio (passive strategy for fouling mitigation) and the catalytic cleaning effectively removed the irreversible oil fouling (active strategy for fouling removal). The functional membrane was prepared via in-situ modification, referred to as δ-MnO₂@TA-PES. The morphology, crystalline phase, chemical structure and surface properties of the membranes were systematically characterized. Compared with PES, the δ-MnO₂@TA-PES possessed superhydrophilicity, enhanced electronegativity and narrowed pore size. The δ-MnO₂@TA-PES achieved high water permeation flux of 723.9 L·m ^- 2·h ^- 1·bar^-1, excellent oil rejection with separation efficiency above 98.5% for various emulsions, and durable anti-oil-fouling performance with FRR_b of 98.0%. Notably, the oil cake layer fouling on δ-MnO₂@TA-PES was greatly alleviated owing to its enhanced surface properties. In addition, δ-MnO₂@TA-PES showed high cleaning efficiency in the peroxymonosulfate (PMS) cleaning process, where the radical and nonradical pathways occurred simultaneously. And the active substances generated in the nonradical process (especially ¹O₂) were considered as the main contributor to the reduction of irreversible fouling. Overall, the novel strategy of fouling control ensured the efficient operation of ultrafiltration membranes for the continuous oily wastewater purification.

New Facility for Membrane Fouling Investigations under Customizable Hydrodynamics: Validation and Preliminary Experiments with Pulsating Cross-Flow

Flux reduction induced by fouling is arguably the most adverse phenomenon in membrane-based separation systems. In this respect, many laboratory-scale filtration studies have shown that an appropriate use of hydrodynamic perturbations can improve both performance and durability of the membrane; however, to fully understand and hence appropriately exploit such effects, it is necessary to understand the underpinning flow processes. Towards this end, in this work we propose and validate a new module-scale laboratory facility with the aim of investigating, at very well-controlled flow conditions, how hydrodynamics affects mass transport phenomena at the feed/membrane interface. The proposed facility was designed to obtain a fully developed and uniform flow inside the test section and to impose both steady and pulsating flow conditions. The walls of the facility were made transparent to grant optical accessibility to the flow. In this paper, we discuss data coming from particle image velocimetry (PIV) measurements and preliminary ultrafiltration tests both under steady and pulsating flow conditions. PIV data indicate that the proposed facility allows for excellent flow control from a purely hydrodynamic standpoint. Results from filtration tests provide promising results pointing towards pulsating flows as a viable technique to reduce fouling in membrane systems.

Antibacterial nanocellulose membranes coated with silver nanoparticles for oil/water emulsions separation

The superhydrophilic/underwater superoleophobic nanocellulose-based membranes show great potential in oil/water emulsion separation. However, nanocellulose composed of polysaccharides inevitably suffered from bacterial erosion during use or storage, resulting in structural damage or reduced separation efficiency. In this work, silver nanoparticles (AgNPs) as effective bactericidal materials are uniformly deposited on tunicate cellulose nanocrystals (TCNCs) by in situ hydrothermal reduction of silver nitrate. TCNCs not only act as reducing agents for silver ions, but also work as dispersant and stabilizers of AgNPs. Nanocomposite membranes are fabricated by vacuum-assisted filtrating of AgNPs@TCNC suspension, which exhibit nanoporous structure, superhydrophilicity, and underwater superoleophobicity. These membranes could efficiently separate oil/water microemulsion with water flux (>324 L m^-2 h^-1 bar^-1) and oil rejection (>99%). Importantly, these membranes show excellent antibacterial efficacy against E. coli and S. aureus, benefiting to their long-term use and storage.

Global bibliometric meta-analytic assessment of research trends on microbial chlorine resistance in drinking water/water treatment systems

Chlorine is the commonest and cheapest disinfectant used in drinking water and wastewater treatment at household, municipal and industrial levels. However, the uprising of microbial chlorine resistance (MCR) pose critical public health hazard concerns; because, its potentiate exposure to difficult-to-treat resistant pathogens. Therefore, this study aimed at evaluating the burden of MCR in drinking water/wastewater treatment and distribution systems (DWWTDS) via science mapping of research productivity (authors, countries, institutions), thematic conceptual framework, disciplines, research networks and associated intellectual landscape. MCR data were mined from Scopus and Web of Science based on optimized algorithms with the root key term "chlorine* resistant*'' and analysed for pre-set indicator variables. Results revealed 1127 documents from 442 journals and 1430% average growth rate (AGR) of research articles from 2017 to 2019 on MCR. Country-wise, the USA (n = 299), China (n = 119), and Japan (n = 43) ranked in the 1st, 2nd, and 3rd positions respectively, among the top participating countries in MCR research. MCR research had considerable performance in public health and sustainable concern subjects namely, Environmental Sciences & Ecology, Engineering, Microbiology, Water Resources, Biotechnology & Applied Microbiology, Food Science & Technology, Public, Environ & Occupational Health, Chemistry, Infectious Diseases, and Marine & Freshwater Biology; and with noticeable AGR in Environmental Sciences & Ecology (330%) and Infectious Diseases (130%). The study found biofilm-related thrusts (n = 90, 270% AGR) as main research hotspots on MCR. Overall, the study identified and discussed four important thematic areas of public health challenges in MCR that could promote increasing waterborne diseases due to (re)emerging pathogens, enteric viruses and dissemination in DWWTDS. In conclusion, this study provides comprehensive overview of the growing burden of MCR in DWWTDS and standout as a primer of information for researchers on MCR. It recommends direct, intentional and integrated research priorities on MCR to overcome accompanying public health and environmental threats. In addition, chlorine resistance in waterborne fungi have not received research attention. Research activities related to fungal chlorine resistance will be an invaluable future direction in DWWTDS and guide against exposure to waterborne pathogenic fungi and mycotoxins. It is unknown whether chlorine resistance can be acquired by horizontal gene transfer in microorganisms and future research should elucidate this important thrust.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

A high-flux and anti-interference dual-functional membrane for effective removal of Pb(II) from natural water

The development of high efficiency filter membranes, particularly those capable of removing trace heavy metals from drinking water sources, is a global challenge. In this study, a dual-functional membrane (P_mG_n@PVDF) was successfully developed by doping graphene oxide (GO) and then depositing polydopamine (PDA). The pure water flux (Jw) was 188 LMH/bar and Pb(II) could be effectively removed in the water volume of 2106.36 L m^-2. Both PDA and GO performed positive functions. PDA layer exhibited a high affinity toward Pb(II) by chelating with amino groups. And doping GO maintained a high pure water flux, which had been decreased by the extra PDA layer. In addition, the effective treatment volume of Pb(II) was elevated to 5029.06 L/m² by the co-existence of citric acid, since neutral PbHL coordinated with neutral NH₂ and cationic PbL- interacted with NH₃⁺ through electrostatic attraction. Furthermore, P_mG_n@PVDF showed the excellent anti-interference performance in high salt and nature organic matters solutions. Thus, this novel dual-functional membrane could be considered as a competitive alternative of NF/RO for the efficient and advanced removal towards heavy metals from natural water.

Enhanced permeability and fouling-resistant capacity of poly(vinylidene fluoride) ultrafiltration membrane based on the PPG-co-PEG-co-PPG copolymer with two hydrophobic terminals and one hydrophilic intermediate

A simple and efficient route was used to prepare an amphiphilic copolymer (poly(propylene glycol)-co-poly(ethylene glycol)-co-poly(propylene glycol)) (PPG-co-PEG-co-PPG) by one-pot polymerization reaction. This copolymer was used as the hydrophilic additive in preparation of poly(vinylidene fluoride) (PVDF) ultrafiltration membranes via immersion-precipitation process. Surface characteristics of the membranes were confirmed by contact angle measurements, zeta potential, attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and atomic force microscopy. During filtration experiments, the modified membranes showed better permeation and antifouling performances compared to PVDF membranes with bovine serum albumin, sodium alginate and yeast. After hydraulic stirring cleaning with deionized water, water flux recovery and rejection ratio of the modified membranes were higher than those of pristine PVDF membrane, and the flux recovery ratio was maximized at 94.29%. It was suggested that PPG-co-PEG-co-PPG copolymer was anchored in the PVDF membrane through the two hydrophobic ends of PPG blocks, while the hydrophilic intermediate of the PEG block segregated onto the membrane or pore surface during the membrane preparation process. The synthesized method of amphiphilic PPG-co-PEG-co-PPG copolymer paved a novel way to solve the problems of less compatibility between the copolymer and membrane matrix and instability with water molecules in the ultrafiltration process.