A highly sensitive HPLC method for determination of nanomolar concentrations of dipicolinic acid, a characteristic constituent of bacterial endospores

Zirconium-Directed Supramolecular Self-Assembly of Coenzyme A@GNCs with Enhanced Phosphorescence for Developing Ultrasensitive Tracer Probe of Dipicolinic Acid, a Biomarker of Bacterial Spores

Luminescent gold nanoclusters (GNCs) are a class of attractive quantum-sized nanomaterials bridging the gap between organogold complexes and gold nanocrystals. They typically have a core-shell structure consisting of a Au(I)-organoligand shell-encapsulated few-atom Au(0) core. Their luminescent properties are greatly affected by their Au(I)-organoligand shell, which also supports the aggregation-induced emission (AIE) effect. However, so far, the luminescent Au nanoclusters encapsulated with the organoligands containing phosphoryl moiety have rarely been reported, not to mention their AIE. In this study, coenzyme A (CoA), an adenosine diphosphate (ADP) analogue that is composed of a bulky 5-phosphoribonucleotide adenosine moiety connected to a long branch of vitamin B5 (pantetheine) via a diphosphate ester linkage and ubiquitous in all living organisms, has been used to synthesize phosphorescent GNCs for the first time. Interestingly, the synthesized phosphorescent CoA@GNCs could be further induced to generate AIE via the PO32- and Zr4+ interactions, and the observed AIE was found to be highly specific to Zr4+ ions. In addition, the enhanced phosphorescent emission could be quickly turned down by dipicolinic acid (DPA), a universal and specific component and also a biomarker of bacterial spores. Therefore, a Zr4+-CoA@GNCs-based DPA biosensor for quick, facile, and highly sensitive detection of possible spore contamination has been developed, showing a linear concentration range from 0.5 to 20 μM with a limit of detection of 10 nM. This study has demonstrated a promising future for various organic molecules containing phosphoryl moiety for the preparation of AIE-active metal nanoclusters.

Dual-mode strategy for 2,6-dipicolinic acid detection based on the fluorescence property and peroxidase-like activity inhibition of Fe-MIL-88NH2

This work designed a fluorometric/colorimetric dual-mode sensor for detecting 2,6-dipicolinic acid (DPA) based on the blue emission property and peroxidase-like activity of Fe-MIL-88NH₂. The fluorescence of Fe-MIL-88NH₂ was obviously turned off by Cu²⁺, but DPA was able to bring it back because it has a strong chelate bond with Cu²⁺. Fe-MIL-88NH₂ also displayed high peroxidase-like activity, which accelerated the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to the blue oxidation product (oxTMB) when H₂O₂ was present. When DPA was added, it efficiently inhibited the peroxidase-like activity of Fe-MIL-88NH₂, causing less oxTMB and less absorbance at 652 nm. The fluorescence recovery of Fe-MIL-88NH₂ and the change in absorbance at 652 nm were used as analytical signals for dual-mode detection of DPA. The linear responses in the range of 10-60 μM and 60-160 μM were achieved for the fluorometric mode, and the limit of detection (LOD) was 1.46 μM. The respective values of linear range and LOD for the colorimetric mode were 5-25 μM and 3.00 μM, respectively. In summary, the dual-mode testing strategy successfully detected DPA in aqueous environmental samples, suggesting great potential in disease prevention and environmental analysis.

Endospores associated with deep seabed geofluid features in the eastern Gulf of Mexico

Recent studies have reported up to 1.9 × 10²⁹ bacterial endospores in the upper kilometre of deep subseafloor marine sediments, however, little is understood about their origin and dispersal. In cold ocean environments, the presence of thermospores (endospores produced by thermophilic bacteria) suggests that distribution is governed by passive migration from warm anoxic sources possibly facilitated by geofluid flow, such as advective hydrocarbon seepage sourced from petroleum deposits deeper in the subsurface. This study assesses this hypothesis by measuring endospore abundance and distribution across 60 sites in Eastern Gulf of Mexico (EGM) sediments using a combination of the endospore biomarker 2,6-pyridine dicarboxylic acid or 'dipicolinic acid' (DPA), sequencing 16S rRNA genes of thermospores germinated in 50°C sediment incubations, petroleum geochemistry in the sediments and acoustic seabed data from sub-bottom profiling. High endospore abundance is associated with geologically active conduit features (mud volcanoes, pockmarks, escarpments and fault systems), consistent with subsurface fluid flow dispersing endospores from deep warm sources up into the cold ocean. Thermospores identified at conduit sites were most closely related to bacteria associated with the deep biosphere habitats including hydrocarbon systems. The high endospore abundance at geological seep features demonstrated here suggests that recalcitrant endospores and their chemical components (such as DPA) can be used in concert with geochemical and geophysical analyses to locate discharging seafloor features. This multiproxy approach can be used to better understand patterns of advective fluid flow in regions with complex geology like the EGM basin.

Microbial polyketides and their roles in insect virulence: from genomics to biological functions

Covering: May 1966 up to January 2022Entomopathogenic microorganisms have potential for biological control of insect pests. Their main secondary metabolites include polyketides, nonribosomal peptides, and polyketide-nonribosomal peptide (PK-NRP) hybrids. Among these secondary metabolites, polyketides have mainly been studied for structural identification, pathway engineering, and for their contributions to medicine. However, little is known about the function of polyketides in insect virulence. This review focuses on the role of bacterial and fungal polyketides, as well as PK-NRP hybrids in insect infection and killing. We also discuss gene distribution and evolutional relationships among different microbial species. Further, the role of microbial polyketides and the hybrids in modulating insect-microbial symbiosis is also explored. Understanding the mechanisms of polyketides in insect pathogenesis, how compounds moderate the host-fungus interaction, and the distribution of PKS genes across different fungi and bacteria will facilitate the discovery and development of novel polyketide-derived bio-insecticides.

Rapid detection and quantitation of dipicolinic acid from Clostridium botulinum spores using mixed-mode liquid chromatography-tandem mass spectrometry

Analysis of the dipicolinic acid (DPA) released from Clostridium botulinum spores during thermal processing is crucial to obtaining a mechanistic understanding of the factors involved in spore heat resistance and related food safety applications. Here, we developed a novel mixed-mode liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for detection of the DPA released from C. botulinum type A, nonproteolytic types B and F strains, and nonpathogenic surrogate Clostridium sporogenes PA3679 spores. DPA was retained on a mixed-mode C18/anion exchange column and was detected using electrospray ionization (ESI) positive mode within a 4-min analysis time. The intraday and interday precision (%CV) was 1.94-3.46% and 4.04-8.28%, respectively. Matrix effects were minimal across proteolytic type A Giorgio-A, nonproteolytic types QC-B and 202-F, and C. sporogenes PA3679 spore suspensions (90.1-114% of spiked DPA concentrations). DPA recovery in carrot juice and beef broth ranged from 105 to 118%, indicating limited matrix effects of these food products. Experiments that assessed the DPA released from Giorgio-A spores over the course of a 5-min thermal treatment at 108 °C found a significant correlation (R = 0.907; P < 0.05) between the log reduction of spores and amount of DPA released. This mixed-mode LC-MS/MS method provides a means for rapid detection of DPA released from C. botulinum spores during thermal processing and has the potential to be used for experiments in the field of food safety that assess the thermal resistance characteristics of various C. botulinum spore types.

Facilitated endospore detection for Bacillus spp. through automated algorithm-based image processing

Bacillus spp. endospores are important dormant cell forms and are distributed widely in environmental samples. While these endospores can have important industrial value (e.g. use in animal feed as probiotics), they can also be pathogenic for humans and animals, emphasizing the need for effective endospore detection. Standard spore detection by colony forming units (CFU) is time-consuming, elaborate and prone to error. Manual spore detection by spore count in cell counting chambers via phase-contrast microscopy is less time-consuming. However, it requires a trained person to conduct. Thus, the development of a facilitated spore detection tool is necessary. This work presents two alternative quantification methods: first, a colorimetric assay for detecting the biomarker dipicolinic acid (DPA) adapted to modern needs and applied for Bacillus spp. and second, a model-based automated spore detection algorithm for spore count in phase-contrast microscopic pictures. This automated spore count tool advances manual spore detection in cell counting chambers, and does not require human overview after sample preparation. In conclusion, this developed model detected various Bacillus spp. endospores with a correctness of 85-89%, and allows an automation and time-saving of Bacillus endospore detection. In the laboratory routine, endospore detection and counting was achieved within 5-10 min, compared to up to 48 h with conventional methods. The DPA-assay on the other hand enabled very accurate spore detection by simple colorimetric measurement and can thus be applied as a reference method.

Sensitive quantification of dipicolinic acid from bacterial endospores in soils and sediments

Endospore-forming bacteria make up an important and numerically significant component of microbial communities in a range of settings including soils, industry, hospitals and marine sediments extending into the deep subsurface. Bacterial endospores are non-reproductive structures that protect DNA and improve cell survival during periods unfavourable for bacterial growth. An important determinant of endospores withstanding extreme environmental conditions is 2,6-pyridine dicarboxylic acid (i.e. dipicolinic acid, or DPA), which contributes heat resistance. This study presents an improved HPLC-fluorescence method for DPA quantification using a single 10-min run with pre-column Tb³⁺ chelation. Relative to existing DPA quantification methods, specific improvements pertain to sensitivity, detection limit and range, as well as the development of new free DPA and spore-specific DPA proxies. The method distinguishes DPA from intact and recently germinated spores, enabling responses to germinants in natural samples or experiments to be assessed in a new way. DPA-based endospore quantification depends on accurate spore-specific DPA contents, in particular, thermophilic spores are shown to have a higher DPA content, meaning that marine sediments with plentiful thermophilic spores may require spore number estimates to be revisited. This method has a wide range of potential applications for more accurately quantifying bacterial endospores in diverse environmental samples.

Temperature limits to deep subseafloor life in the Nankai Trough subduction zone

Microorganisms in marine subsurface sediments substantially contribute to global biomass. Sediments warmer than 40°C account for roughly half the marine sediment volume, but the processes mediated by microbial populations in these hard-to-access environments are poorly understood. We investigated microbial life in up to 1.2-kilometer-deep and up to 120°C hot sediments in the Nankai Trough subduction zone. Above 45°C, concentrations of vegetative cells drop two orders of magnitude and endospores become more than 6000 times more abundant than vegetative cells. Methane is biologically produced and oxidized until sediments reach 80° to 85°C. In 100° to 120°C sediments, isotopic evidence and increased cell concentrations demonstrate the activity of acetate-degrading hyperthermophiles. Above 45°C, populated zones alternate with zones up to 192 meters thick where microbes were undetectable.

Quantification of endospores in ancient permafrost using time-resolved terbium luminescence

We describe herein a simple procedure for quantifying endospore abundances in ancient and organic-rich permafrost. We repeatedly (10x) extracted and fractionated permafrost using a tandem filter assembly composed of 3 and 0.2 μm filters. Then, the 0.2 μm filter was washed (7x), autoclaved, and the contents eluted, including dipicolinic acid (DPA). Time-resolved luminescence using Tb(EDTA) yielded a LOD of 1.46 nM DPA (6.55 × 10³ endospores/mL). In review, DPA/endospore abundances were ~2.2-fold greater in older 33 ky permafrost (258 ± 36 pmol DPA gdw^-1; 1.15 × 10⁶ ± 0.16 × 10⁶ spores gdw^-1) versus younger 19 ky permafrost (p = 0.007297). This suggests that dormancy increases with permafrost age.

Microbial dormancy in the marine subsurface: Global endospore abundance and response to burial

Marine sediments host an unexpectedly large microbial biosphere, suggesting unique microbial mechanisms for surviving burial and slow metabolic turnover. Although dormancy is generally considered an important survival strategy, its specific role in subsurface sediments remains unclear. We quantified dormant bacterial endospores in 331 marine sediment samples from diverse depositional types and geographical origins. The abundance of endospores relative to vegetative cells increased with burial depth and endospores became dominant below 25 m, with an estimated population of 2.5 × 10²⁸ to 1.9 × 10²⁹ endospores in the uppermost kilometer of sediment and a corresponding biomass carbon of 4.6 to 35 Pg surpassing that of vegetative cells. Our data further identify distinct endospore subgroups with divergent resistance to burial and aging. Endospores may shape the deep biosphere by providing a core population for colonization of new habitats and/or through low-frequency germination to sustain slow growth in this environment.

Gold nanocluster-based fluorescence sensing probes for detection of dipicolinic acid

A switched-on fluorescence sensing probe for the detection of dipicolinic acid (DPA) is demonstrated in this study.

Endophytic Paenibacillus amylolyticus KMCLE06 Extracted Dipicolinic Acid as Antibacterial Agent Derived via Dipicolinic Acid Synthetase Gene

Bioactive natural compounds play pivotal roles in drug discovery and the emergence of multi-drug resistance pathogens demands the development of better/new drugs. Paenibacillus amylolyticus KMCLE06 endophytic bacterium isolated from the medicinal plant Coix lachryma-jobi were analyzed for the potential bioactive secondary metabolite compounds and its gene responsible within polyketide synthases (PKS) clusters. Ethyl acetate extraction of P. amylolyticus KMCLE06 showed significant antibacterial activity which was further processed to partial purification and characterization for bioactive compound. The foremost bioactive component in extraction was found to be dipicolinic acid (DPA). The antibacterial activity showed remarkable activity compared to the commercial standard DPA against both gram-positive and gram-negative pathogens. The MIC and MBC concentrations for partially purified extracted DPA ranged from 62.5 to 125 µg/ml and MBC from 208 to 250 µg/ml, respectively. Sequence analysis of gene amplified using degenerative primer, amplified 543 bp DNA region, revealing conserved putative open reading frame for dipicolinic acid synthetase (DpsA) key gene to produce DPA in most endospore forming bacteria. A search in the structural database for DpsA revealed significant homologous match with enoyl reductase one of the PKS type 1 module protein. This emphasizes endophytic P. amylolyticus KMCLE06 bacteria has presence of spoVF operon producing DPA via dipicolinic acid synthetase and lacks the polyketide synthase type 1 module cluster gene in its genome. And the bioactive compound DPA extracted acts as a stable remarkable antibacterial agent which can be potent compound for multi-resistance pathogens.

High pressure thermal inactivation of Clostridium botulinum type E endospores - kinetic modeling and mechanistic insights

Cold-tolerant, neurotoxigenic, endospore forming Clostridium (C.) botulinum type E belongs to the non-proteolytic physiological C. botulinum group II, is primarily associated with aquatic environments, and presents a safety risk for seafood. High pressure thermal (HPT) processing exploiting the synergistic effect of pressure and temperature can be used to inactivate bacterial endospores. We investigated the inactivation of C. botulinum type E spores by (near) isothermal HPT treatments at 300–1200 MPa at 30–75°C for 1 s to 10 min. The occurrence of heat and lysozyme susceptible spore fractions after such treatments was determined. The experimental data were modeled to obtain kinetic parameters and represented graphically by isoeffect lines. In contrast to findings for spores of other species and within the range of treatment parameters applied, zones of spore stabilization (lower inactivation than heat treatments alone), large heat susceptible (HPT-induced germinated) or lysozyme-dependently germinable (damaged coat layer) spore fractions were not detected. Inactivation followed first order kinetics. Dipicolinic acid release kinetics allowed for insights into possible inactivation mechanisms suggesting a (poorly effective) physiologic-like (similar to nutrient-induced) germination at ≤450 MPa/≤45°C and non-physiological germination at >500 MPa/>60–70°C. Results of this study support the existence of some commonalities in the HPT inactivation mechanism of C. botulinum type E spores and Bacillus spores although both organisms have significantly different HPT resistance properties. The information presented here contributes to closing the gap in knowledge regarding the HPT inactivation of spore formers relevant to food safety and may help industrial implementation of HPT processing. The markedly lower HPT resistance of C. botulinum type E spores compared with the resistance of spores from other C. botulinum types could allow for the implementation of milder processes without endangering food safety.

Nanopore back titration analysis of dipicolinic acid

Here, we report a novel label-free nanopore back titration method for the detection of dipicolinic acid, a marker molecule for bacterial spores. By competitive binding of the target analyte and a large ligand probe to metal ions, dipicolinic acid could be sensitively and selectively detected. This nanopore back titration approach should find useful applications in the detection of other species of medical, biological, or environmental importance if their direct detection is difficult to achieve.

Quantification of endospore-forming firmicutes by quantitative PCR with the functional gene spo0A

Bacterial endospores are highly specialized cellular forms that allow endospore-forming Firmicutes (EFF) to tolerate harsh environmental conditions. EFF are considered ubiquitous in natural environments, in particular, those subjected to stress conditions. In addition to natural habitats, EFF are often the cause of contamination problems in anthropogenic environments, such as industrial production plants or hospitals. It is therefore desirable to assess their prevalence in environmental and industrial fields. To this end, a high-sensitivity detection method is still needed. The aim of this study was to develop and evaluate an approach based on quantitative PCR (qPCR). For this, the suitability of functional genes specific for and common to all EFF were evaluated. Seven genes were considered, but only spo0A was retained to identify conserved regions for qPCR primer design. An approach based on multivariate analysis was developed for primer design. Two primer sets were obtained and evaluated with 16 pure cultures, including representatives of the genera Bacillus, Paenibacillus, Brevibacillus, Geobacillus, Alicyclobacillus, Sulfobacillus, Clostridium, and Desulfotomaculum, as well as with environmental samples. The primer sets developed gave a reliable quantification when tested on laboratory strains, with the exception of Sulfobacillus and Desulfotomaculum. A test using sediment samples with a diverse EFF community also gave a reliable quantification compared to 16S rRNA gene pyrosequencing. A detection limit of about 10(4) cells (or spores) per gram of initial material was calculated, indicating this method has a promising potential for the detection of EFF over a wide range of applications.

One-step conversion of to its using salts for GC-MSdetection of bacterial endospores

Methyl sulfate (MeSO4-) salts were explored as thermochemolysis-methylation (TCM) reagents for gas chromatographic (GC) analysis of dipicolinic acid (DPA) as its dimethyl ester (Me2DPA) from bacterial endospores. The reaction was carried out under non-pyrolytic conditions by inserting a small coiled wire filament coated with the sample and reagents directly inside a GC injection port at 290 °C. Above 10 : 1 methyl donor/DPA ratios, alkali metal salts of MeSO4- effected 80-90% conversion of DPA to Me2DPA, which was 10-20 times more active than the same amount of tetramethylammonium hydroxide (TMA-OH) at this temperature. A quaternary salt mixture consisting of 1 : 3 : 1 : 3 TMA+/Na+/OH-/MeSO4- methylated spore DPA with an average conversion of 86% (mean conversion by TMA-OH under the same conditions was 4%). Therefore, the sensitivity for detection of bacterial endospores was increased over 20-fold compared to that observed with the more commonly employed TMA-OH methylating reagent. The limit of detection by this method was 9 × 104 total spores. Mechanisms describing the observed behavior are proposed and discussed. This is the first use of MeSO4- as a TCM reagent for GC.

Diversity of Bacillus-like organisms isolated from deep-sea hypersaline anoxic sediments

Background

The deep-sea, hypersaline anoxic brine lakes in the Mediterranean are among the most extreme environments on earth, and in one of them, the MgCl₂-rich Discovery basin, the presence of active microbes is equivocal. However, thriving microbial communities have been detected especially in the chemocline between deep seawater and three NaCl-rich brine lakes, l'Atalante, Bannock and Urania. By contrast, the microbiota of these brine-lake sediments remains largely unexplored.

Results

Eighty nine isolates were obtained from the sediments of four deep-sea, hypersaline anoxic brine lakes in the Eastern Mediterranean Sea: l'Atalante, Bannock, Discovery and Urania basins. This culture collection was dominated by representatives of the genus Bacillus and close relatives (90% of all isolates) that were investigated further. Physiological characterization of representative strains revealed large versatility with respect to enzyme activities or substrate utilization. Two third of the isolates did not grow at in-situ salinities and were presumably present as endospores. This is supported by high numbers of endospores in Bannock, Discovery and Urania basins ranging from 3.8 × 10⁵ to 1.2 × 10⁶ g^-1 dw sediment. However, the remaining isolates were highly halotolerant growing at salinities of up to 30% NaCl. Some of the novel isolates affiliating with the genus Pontibacillus grew well under anoxic conditions in sulfidic medium by fermentation or anaerobic respiration using dimethylsulfoxide or trimethylamine N-oxide as electron acceptor.

Conclusion

Some of the halophilic, facultatively anaerobic relatives of Bacillus appear well adapted to life in this hostile environment and suggest the presence of actively growing microbial communities in the NaCl-rich, deep-sea brine-lake sediments.