Synthesis, crystal structures and catalytic activity of Cu(II) and Mn(III) Schiff base complexes: Influence of additives on the oxidation catalysis of cyclohexane and 1-phenylehanol

Supramolecular Diversity, Theoretical Investigation and Antibacterial Activity of Cu, Co and Cd Complexes Based on the Tridentate N,N,O-Schiff Base Ligand Formed In Situ

The four new complexes, [Cu(HL¹)(L²)Cl] (1), [Cu(HL¹)(L¹)]∙Cl∙2H₂O (2), [Co(L¹)₂]∙Cl (3) and [Cd(HL¹)I₂]∙dmso (4), have been prepared by one-pot reactions of the respective chloride or iodide metal salt with a non-aqueous solution of the polydentate Schiff base, HL¹, resulted from in situ condensation of benzhydrazide and 2-pyridinecarboxaldehyde, while a ligand HL², in case of 1, has been formed due to the oxidation of 2-pyridinecarboxaldehyde under reaction conditions. The crystallographic analysis revealed that the molecular building units in 1-4 are linked together into complex structures by hydrogen bonding, resulting in 1D, 2D and 3D supramolecular architectures for 1, 2 and 4, respectively, and the supramolecular trimer for 3. The electronic structures of 1-4 were investigated by the DFT theoretical calculations. The non-covalent interactions in the crystal structures of 1-4 were studied by means of the Hirshfeld surface analysis and the QTAIM theory with a special focus on the C-H⋯Cl bonding. From the DFT/DLPNO-CCSD(T) calculations, using a series of charged model {R₃C-H}⁰⋯Cl^- assemblies, we propose linear regressions for assessment of the interaction enthalpy (ΔH, kcal mol^-1) and the binding energy (BE, kcal mol^-1) between {R₃C-H}⁰ and Cl^- sites starting from the electron density at the bond critical point (ρ(r_BCP), a.u.): ΔH = -678 × ρ(r) + 3 and BE = -726 × ρ(r) + 4. It was also has been found that compounds 1, 3 and 4 during in vitro screening showed an antibacterial activity toward the nine bacteria species, comprising both Gram-positive and Gram-negative, with MIC values ranging from 156.2 to 625 mg/L. The best results have been obtained against Acinetobacter baumannii MβL.

Synthesis and Crystal Structures of Mn(II) and Co(II) Complexes as Catalysts for Oxidation of Cyclohexanone

The global demand on adipic usage in the production of plasticizers and synthetic polyamide is increasing. In line with the search for an efficient and energy-conserving way to isolate adipic acid (AA) in good yields, this paper introduces the oxidization of cyclohexanone utilizing two new coordination compounds, [Mn(2,6-pydc)2](imi) (1) and [Co(H2pza)2(H2O)2(NO3)].NO3 (2), as catalysts. Compounds 1 and 2 were synthesized by room temperature and refluxing methods, and characterized by spectral analyses (IR and UV-Vis.), SEM, BET, TGA, elemental, and X-ray crystallography. The single crystal structure of compound 1 revealed that pyridinedicarboxylate (2,6-pydc) and imidazole (imi) moieties were coordinated to the Mn(II) atom through imine nitrogen and deprotonated oxygen atoms, to form an undistorted octahedral coordination geometry with the N2O4 donor set. The axial and equatorial planes containing O2, O4, O5, and O7 atoms were from two adjacent 2,6-pydc ligands which formed the unidendate donor ligand; imi, on the other hand, acted as a bidendate donor ligand. For compound 2, the Co(II) atom was being coordinated by two pyrazinamide (H2pza) moieties, which acted as an unidendate donor ligand; two water molecules occupying the axial position, and one nitrate molecule occupying the apical position, were within the coordination sphere; a nitrate molecule was disordered outside the coordination sphere. The distance, 4.658 Å, between the Co1 atom and the N8 atom of the uncoordinated nitrate molecule, was within the range reported elsewhere. Cyclohexanone peroxidation experiments revealed that compound 1 exhibited unique catalytic performance by giving a 72.8% yield in adipic acid, in comparison to the 71.3% yield obtained with compound 2. The yields in AA were maintained by way of recyclability evaluation. The reaction kinetics of compound 2 gave less activation energy, Ea 2938 J mol−1, while the thermodynamic parameters indicated that the chemical reactivity of cyclohexanone on the active surfaces of compounds 1 and 2 was via monolayer physisorption.

Water-soluble Al(iii), Fe(iii) and Cu(ii) formazanates: synthesis, structure, and applications in alkane and alcohol oxidations

The synthesis, structure and catalytic performance of water-soluble Al(iii), Fe(iii) and Cu(ii) formazanates in the oxidation of cyclohexane and cyclohexanol to the coresponding organic products are reported.

Homogeneous oxidation of C–H bonds with m-CPBA catalysed by a Co/Fe system: mechanistic insights from the point of view of the oxidant

A Co/Fe system efficiently catalyses the oxidation of C–H bonds with m-CPBA. The nitric acid promoter hampers the m-CPBA homolysis, suppressing the free radical activity. Experimental and computational data evidence a concerted oxidation mechanism.

A novel o-vanillin Fe(III) complex catalytically active in C-H oxidation: exploring the magnetic exchange interactions and spectroscopic properties with different DFT functionals

The novel complex [Fe^IIICl(L)₂(H₂O)] (1) was synthesized by interaction of iron(III) chloride with ethanol solution of o-vanillin (HL) and characterized by IR, UV/Vis spectroscopy, thermogravimetry and single crystal X-ray diffraction analysis. The molecules of 1 in the solid state are joined into supramolecular dimeric units, where a set of strong hydrogen bonds predefines the structure of the dimer according to the "key-lock" principle. From the Hirshfield surface analysis the contribution of π⋯π stacking to the overall stabilization of the dimer was found to be negligible. Broken symmetry DFT calculations suggested the presence of long-range antiferromagnetic interactions (J = -0.12 cm^-1 for H = -JS₁S₂ formalism) occurring through the Fe-O⋯O-Fe pathway, as evidenced by the studies of the model dimers where the water molecules were substituted by acetonitrile and acetone ones. The benchmark studies using a set of literature examples and various DFT functionals revealed the hybrid-GGA B3LYP as the best one for prediction of Fe^III⋯Fe^III antiferromagnetic exchange couplings of small magnitude. Magnetic susceptibility measurements confirmed antiferromagnetic coupling between the metal atoms in 1 with a coupling constant of -0.35 cm^-1. Catalytic studies demonstrated that 1 acts as an efficient catalyst in the oxidation of cyclohexane with hydrogen peroxide in the presence of nitric acid promoter and under mild conditions (yield up to 37% based on the substrate), while tert-butylhydroperoxide (TBHP) and m-chloroperoxybenzoic acid (m-CPBA) as oxidants exhibit less efficiency. Combined UV/TDDFT studies evidence the structural rearrangement of 1 in acetonitrile with the formation of [Fe^IIICl(L)₂(CH₃CN)] species. The TDDFT benchmark using nine common DFT functionals and two model compounds (o-vanillin and [Fe^III(H₂O)₆]³⁺ ion) support the hybrid meta-GGA M06-2X functional as the one most correctly predicting the excited state structure for the Fe(III) complexes, under the conditions studied.

One-Stage Catalytic Oxidation of Adamantane to Tri-, Tetra-, and Penta-Ols

Tertiary tetraols of adamantane (C10H16, Tricyclo[3.3.1.1(3,7)]decan) have been widely used for the synthesis of highly symmetric compounds with unique physical and chemical properties. The methods for one-stage simultaneously selective, deep, and cheap oxidation of adamantane to tetraols of different structures have not yet been developed. In this research, chemically simple, cheap, and environmentally friendly reagents are used and that is the first step in this direction. The conditions, under which the impact of a hydrogen peroxide water solution on adamantane dissolved in acetonitrile results in full conversion of adamantane and formation of a total 72% mixture of its tri-, tetra-, and penta-oxygenated products, predominantly poliols, have been found. Conversion and adamantane oxidation depth are shown to depend on the ratio of components of the water-acetonitrile solution and the method of oxidizer solution introduction when using the dimer form of 1:1 dimethylglyoxime and copper dichloride complex as a catalyst. Under the conditions of mass-spectrometry ionization by electrons (70 eV), fragmentation across three C–C bonds of the molecular ions framework of adamantane tertiary alcohols Ad(OH)n in the range n = 0–4 increases linearly with the rise of n.

Novel H-Bonded Synthons in Copper Supramolecular Frameworks with Aminoethylpiperazine-Based Ligands. Synthesis, Structure and Catalytic Activity

New Schiff base complexes [Cu2(HL1)(L1)(N3)3]∙2H2O (1) and [Cu2L2(N3)2]∙H2O (2) were synthesized. The crystal structures of 1 and 2 were determined by single-crystal X-ray diffraction analysis. The HL1 ligand results from the condensation of salicylaldehyde and 1-(2-aminoethyl)piperazine, while a new organic ligand, H2L2, was formed by the dimerization of HL1 via a coupling of two piperazine rings of HL1 on a carbon atom coming from DMF solvent. The dinuclear building units in 1 and 2 are linked into complex supramolecular networks through hydrogen and coordination bondings, resulting in 2D and 1D architectures, respectively. Single-point and broken-symmetry DFT calculations disclosed negligible singlet-triplet splittings within the dinuclear copper fragments in 1 and 2. Catalytic studies showed a remarkable activity of 1 and 2 towards cyclohexane oxidation with H2O2 in the presence of nitric acid and pyridine as promoters and under mild conditions (yield of products up to 21%). Coordination compound 1 also acts as an active catalyst in the intermolecular coupling of cyclohexane with benzamide using di-tert-butyl peroxide (tBuOOtBu) as a terminal oxidant. Conversion of benzamide at 55% was observed after 24 h reaction time. By-product patterns and plausible reaction mechanisms are discussed.

Recent Advances in Copper Catalyzed Alcohol Oxidation in Homogeneous Medium

The development of sustainable processes and products through innovative catalytic materials and procedures that allow a better use of resources is undoubtedly one of the most significant issues facing researchers nowadays. Environmental and economically advanced catalytic processes for selective oxidation of alcohols are currently focused on designing new catalysts able to activate green oxidants (dioxygen or peroxides) and applying unconventional conditions of sustainable significance, like the use of microwave irradiation as an alternative energy source. This short review aims to provide an overview of the recently (2015–2020) discovered homogeneous aerobic and peroxidative oxidations of primary and secondary alcohols catalyzed by copper complexes, highlighting new catalysts with potential application in sustainable organic synthesis, with significance in academia and industry.

C. Ribeiro A, Kolobova E, M. D. R. S. Martins L, A. C. Carabineiro S, German D, Pichugina D, Jiang C, J. L. Pombeiro A, Bogdanchikova N, Cortés Corberán V, Pestryakov A. Supported Gold Nanoparticles as Catalysts in Peroxidative and Aerobic Oxidation of 1-Phenylethanol under Mild Conditions

The efficiency of Au/TiO₂ based catalysts in 1-phenylethanol oxidation was investigated. The role of support modifiers (La₂O₃ or CeO₂), influence of gold loading (0.5% or 4%) and redox pretreatment atmosphere, catalyst recyclability, effect of oxidant: tert-butyl hydroperoxide (TBHP) or O₂, as well as the optimization of experimental parameters of the reaction conditions in the oxidation of this alcohol were studied and compared with previous studies on 1-octanol oxidation. Samples were characterized by temperature-programmed oxygen desorption (O₂-TPD) method. X-ray photoelectron spectroscopy (XPS) measurements were carried out for used catalysts to find out the reason for deactivation in 1-phenylethanol oxidation. The best catalytic characteristics were shown by catalysts modified with La₂O₃, regardless of the alcohol and the type of oxidant. When O₂ was used, the catalysts with 0.5% Au, after oxidative pretreatment, showed the highest activity in both reactions. The most active catalysts in 1-phenylethanol oxidation with TBHP were those with 4% Au and the H₂ treatment, while under the same reaction conditions, 0.5% Au and O₂ treatment were beneficial in 1-octanol oxidation. Despite the different chemical nature of the substrates, it seems likely that Au⁺(Au^δ+) act as the active sites in both oxidative reactions. Density functional theory (DFT) simulations confirmed that the gold cationic sites play an essential role in 1-phenylethanol adsorption.

A Cu/Zn heterometallic complex with solvent-binding cavity, catalytic activity for the oxidation of 1-phenylethanol and unusual magnetic properties

Mononuclear and polymeric complexes of zinc(ii) and copper(ii) have been synthesized using two isomers of the hemi-salen ligand with a different mutual orientation of donor atoms. The heterometallic Cu/Zn metallocycle features a catalytic niche filled with the molecule of water and molecules of methanol. This unusual compound exhibits both pronounced catalytic activity in the reaction of oxidation of a secondary alcohol to ketone and field induced slow magnetic relaxation, which is a very rare phenomenon among Cu(ii) complexes.

A Comparative Study of the Catalytic Behaviour of Alkoxy-1,3,5-Triazapentadiene Copper(II) Complexes in Cyclohexane Oxidation

The mononuclear copper complexes [Cu{NH=C(OR)NC(OR)=NH}2] with alkoxy-1,3,5-triazapentadiene ligands that have different substituents (R = Me (1), Et (2), nPr (3), iPr (4), CH2CH2OCH3 (5)) were prepared, characterized (including the single crystal X-ray analysis of 3) and studied as catalysts in the mild oxidation of alkanes with H2O2 as an oxidant, pyridine as a promoting agent and cyclohexane as a main model substrate. The complex 4 showed the highest activity with a yield of products up to 18.5% and turnover frequency (TOF) up to 41 h−1. Cyclohexyl hydroperoxide was the main reaction product in all cases. Selectivity parameters in the oxidation of substituted cyclohexanes and adamantane disclosed a dominant free radical reaction mechanism with hydroxyl radicals as C–H-attacking species. The main overoxidation product was 6-hydroxyhexanoic acid, suggesting the presence of a secondary reaction mechanism of a different type. All complexes undergo gradual alteration of their structures in acetonitrile solutions to produce catalytically-active intermediates, as evidenced by UV/Vis spectroscopy and kinetic studies. Complex 4, having tertiary C–H bonds in its iPr substituents, showed the fastest alteration rate, which can be significantly suppressed by using the CD3CN solvent instead of CH3CN one. The observed process was associated to an autocatalytic oxidation of the alkoxy-1,3,5-triazapentadiene ligand. The deuterated complex 4-d32 was prepared and showed higher stability under the same conditions. The complexes 1 and 4 showed different reactivity in the formation of H218O from 18O2 in acetonitrile solutions.

Tetradentate iminophenolate copper complexes in rac-lactide polymerization

Copper(II) nitrate complexes of 2-(((2-((2-aminoethyl)amino)ethyl)imino)methyl)phenol, 2-(((2-((2-aminoethyl)amino)ethyl)imino)methyl)-4,6-dichlorophenol, 2-(((2-(piperazin-1-yl)ethyl)imino)methyl)phenol and (2,4-di-tert-butyl-6-(((2-(piperazin-1-yl)ethyl)imino)methyl)phenol, as well as a copper(II) acetate complex of 2-(((2-(piperidin-1-yl)ethyl)imino)methyl)phenol, have been prepared and characterized by X-ray diffraction studies. In combination with benzyl alcohol, all complexes are active in rac-lactide polymerization at 140 °C in molten monomer to provide moderately heterotactic polylactic acid. Most complexes showed complicated reaction kinetics, indicative of two interconverting active species. Molecular weight control was poor and a strong tendency toward intramolecular transesterification led to oligomeric products. There was no indication that the basic site of the ligand is participating in the polymerization reaction by deprotonation of the alcohol nucleophile.

The conformational preferences of polychlorocyclohexanes

A simple but precise model equation to get accurate conformational energies of polychlorocyclohexane conformations.

Copper(II) Complexes of Arylhydrazone of 1H-Indene-1,3(2H)-dione as Catalysts for the Oxidation of Cyclohexane in Ionic Liquids

The copper(II) complexes [CuL(H2O)2]∙H2O (1) and [CuL(dea)] (2) [L = 2-(2-(1,3-dioxo-1H-inden-2(3H)-ylidene)hydrazinyl)benzenesulfonate, dea = diethanolamine] were applied as catalysts in the peroxidative (with tert-butyl-hydroperoxide or hydrogen peroxide) conversion of cyclohexane to cyclohexanol and cyclohexanone, either in acetonitrile or in any of the ionic liquids [bmim][NTf2] and [hmim][NTf2] [bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, NTf2 = bis(trifluoromethanesulfonyl) imide]. Tert-butyl-hydroperoxide led to better product yields, as compared to H2O2, with a selectivity directed towards cyclohexanone. The ILs showed a better performance than the conventional solvent for the copper complex 1. No catalytic activity was observed for 2 in the presence of an IL.

Preparation, Characterisation, Crystal Structure and Antibacterial Activity of two Bis-Schiff Bases Containing a Piperazine Ring

Two new bis-Schiff bases containing a piperazine ring, N,N‘-bis(4-chlorobenzylidene)- and N,N‘-bis(4-cyanobenzylidene)-1,4-bis(3-aminopropyl)piperazine, were prepared by the reaction of N,N‘-bis(3-aminopropyl)piperazine with 4-chloro- and 4-cyanobenzaldehyde, respectively. The dichloro compound was fully identified by X-ray crystallography and it exhibited good antibacterial activity against Escherichia coli, Staphylococcus aureus and Bacillus subtilis.

Heterometallic CuIIFeIII and CuIIMnIII alkoxo-bridged complexes revealing a rare hexanuclear M6(μ-X)7(μ3-X)2 molecular core

The novel hexanuclear complexes [Cu4Fe2(OH)(Piv)4(tBuDea)4Cl]·0.5CH3CN (1) and [Cu4Mn2(OH)(Piv)4(tBuDea)4Cl] (2) were prepared through one-pot self-assembly reactions of copper powder and iron(ii) or manganese(ii) chloride with N-tert-butyldiethanolamine (H2tBuDea) and pivalic acid (HPiv) in acetonitrile. Crystallographic studies revealed the uncommon molecular core type M6(μ-X)7(μ3-X)2 in 1 and 2, which can be viewed as a combination of two trimetallic M3(μ-X)2(μ3-X) fragments joined by three bridging atoms. The analysis and classification of the hexanuclear complexes having a M3(μ-X)2(μ3-X) moiety as a core forming fragment using data from the Cambridge Structural Database (CSD) were performed. Variable-temperature (1.8-300 K) magnetic susceptibility measurements of 1 showed a decrease of the effective magnetic moment value at low temperature, indicative of antiferromagnetic coupling between the magnetic centres (JFe-Cu/hc = -6.9 cm-1, JCu-Cu/hc = -4.1 cm-1, JFe-Fe/hc = -24.2 cm-1). Complex 1 acts as a catalyst in the reaction of mild oxidation of cyclohexane with H2O2, showing the yields of products, cyclohexanol and cyclohexanone, up to 17% using pyrazinecarboxylic acid as a promoter. In the oxidation of cis-1,2-dimethylcyclohexane with m-chloroperoxybenzoic acid (m-CPBA), 70% of retention of stereoconfiguration was observed for tertiary alcohols. Compound 1 also catalyses the amidation of cyclohexane with benzamide. In all three catalytic reactions the by-products were investigated in detail and discussed.

Copper(ii) complexes of functionalized 2,2':6',2''-terpyridines and 2,6-di(thiazol-2-yl)pyridine: structure, spectroscopy, cytotoxicity and catalytic activity

Six new copper(ii) complexes with 2,2':6',2''-terpyridine (4'-Rⁿ-terpy) [1 (R¹ = furan-2-yl), 2 (R² = thiophen-2-yl), and 3 (R³ = 1-methyl-1H-pyrrol-2-yl)] and 2,6-di(thiazol-2-yl)pyridine derivatives (Rⁿ-dtpy) [4 (R¹), 5 (R²), and 6 (R³)] have been synthesized by a reaction between copper(ii) chloride and the corresponding ligand. The complexes have been characterized by UV-vis and IR spectroscopy, and their structures have been determined by X-ray analysis. The antiproliferative potential of copper(ii) complexes of 2,2':6',2''-terpyridine and 2,6-di(thiazol-2-yl)pyridine derivatives towards human colorectal (HCT116) and ovarian (A2780) carcinoma as well as towards lung (A549) and breast adenocarcinoma (MCF7) cell lines was examined. Complex 1 and complex 6 were found to have the highest antiproliferative effect on A2780 ovarian carcinoma cells, particularly when compared with complex 2, 3 with no antiproliferative effect. The order of cytotoxicity in this cell line is 6 > 1 > 5 > 4 > 2 ≈ 3. Complex 2 seems to be much more specific towards colorectal carcinoma HCT116 and lung adenocarcinoma A549 cells. The viability loss induced by the complexes agrees with Hoechst 33258 staining and typical morphological apoptotic characteristics like chromatin condensation and nuclear fragmentation. The specificity towards different types of cell lines and the low cytotoxic activity towards healthy cells are of particular interest and are a positive feature for further developments. Complexes 1-6 were also tested in the oxidation of alkanes and alcohols with hydrogen peroxide and tert-butyl-hydroperoxide (TBHP). The most active catalyst 4 gave, after 120 min, 0.105 M of cyclohexanol + cyclohexanone after reduction with PPh₃. This concentration corresponds to a yield of 23% and TON = 210. Oxidation of cis-1,2-dimethylcyclohexane with m-CPBA catalyzed by 4 in the presence of HNO₃ gave a product of a stereoselective reaction (trans/cis = 0.47). Oxidation of secondary alcohols afforded the target ketones in yields up to 98% and TON = 630.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

Surface modification using TEMPO and its derivatives

This article provides an overview of the methods for surface modification based on the use of stable radicals: 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and its derivatives. Two approaches are discussed. The first relies on the immobilization of TEMPO moieties on the surface of various materials including silicon wafers, silica particles, organic polymers as well as diverse nanomaterials. Applications of such materials with spin labeled surface/interface, in (electro)catalysis, synthesis of novel hybrid nanostructures and nanocomposites as well as in designing of organic magnets and novel energy storage devices are also included in the discussion. The second approach utilizes TEMPO and its derivatives for the grafting of polymer chains and polymer brushes formation on flat and nanostructure surfaces via Nitroxide Mediated Radical Polymerization (NMRP). The influence of such polymer modification on surface/interface physicochemical properties is also presented.

Windmill-type mixed-metal clusters containing Schiff-base ligands as an efficient catalyst for cyclohexene oxidation

Two new mixed-metal clusters {CuM₂(H₂O)₂[Cu(C₁₄H₁₆N₂O₃)Cl]₆}·H₂O (M = Mn 1, Zn 2) were synthesized and the properties of cyclohexene oxidation were investigated.

Synthesis, characterization, crystal structure, electrochemical, solvatochromic and biological investigation of novel N4 and N3 type Cu(ii) Schiff base complexes

In the present study, three novel Cu(ii) Schiff base complexes were synthesized and characterized using infrared spectroscopy, elemental analysis, conductivity measurements and X-ray crystallography.