Various flotation techniques for metal ions removal

Starch-based self-assembled three-dimensional network nanostructure materials for sustainable cascade adsorption

Toward the development of a sustainable utilization strategy for adsorption materials, a starch-based adsorbent starch-chitosan-tannic acid (St-CTS-TA) with a three-dimensional (3D) structure was fabricated in water via electrostatic and hydrogen bonding reactions between St, CTS, and TA without using toxic reducing agents or special instruments. St-CTS-TA demonstrated a high specific surface area of 37 m2/g as well as a mesoporous/macroporous distribution ranging from 30 to 80 nm, which enhanced the mass transfer of adsorbate and the exposure of catechol groups in TA. The Langmuir isotherm adsorption model revealed that the highest adsorption capacities of St-CTS-TA for Fe3+ and Co2+ were 1678.2 and 944.8 mg/g, respectively. Surprisingly, the specific surface area of St-CTS-TA increased from 37 to 87 and 42 m2/g after Fe3+ and Co2+ adsorption, respectively, and the resulting St-CTS-TA-Fe and St-CTS-TA-Co could continuously adsorb basic fuchsin (BF) and rhodamine B (RhB). The adsorption capacities of St-CTS-TA-Fe and St-CTS-TA-Co for BF/RhB were found to be 1854.79/401.19 mg/g and 2229.77/537.49 mg/g, respectively, based on the Langmuir isotherm adsorption model.

Feasibility of density-based separation of Ce and Hf intermetallics in liquid Bi

Efficient separation of actinide elements from molten salts employed in pyroprocessing can significantly diminish the radiological hazards and oversight duration associated with spent nuclear fuel storage. The lanthanum content of waste salts is very high compared to actinides, leading to the co-electrodeposition of both groups of elements for conventional electrochemical techniques. Due to the difficulty in separating the two groups of elements, the feasibility of the density-based separation using liquid bismuth and intermetallics was explored. Hafnium was used as a stand-in for actinide elements with physical properties mirroring those of actinide-laden Bi-Hf intermetallics. Conversely, cerium was chosen to represent lanthanides. This study delved into the formation and spatial distribution of bismuth intermetallics under varying concentration ratios and cooling durations. Comprehensive characterization was achieved using scanning electron microscopy and energy-dispersive spectrometry. The analysis showed that Bi-Ce particles were formed and distributed in the upper layer of the Bi ingot, and Bi-(Ce, Hf) particles containing both Ce and Hf in the lower layer. The findings underscore the viability of density-based separation while highlighting the intricacies related to intermetallic coprecipitation. Continued investigations are essential to fully harness the potential of density-based separation.

Comparing Conventional and Advanced Approaches for Heavy Metal Removal in Wastewater Treatment: An In-Depth Review Emphasizing Filter-Based Strategies

Various industrial activities release heavy metal ions into the environment, which represent one of the major toxic pollutants owing to their severe effects on the environment, humans, and all living species. Despite several technological advances and breakthroughs, wastewater treatment remains a critical global issue. Traditional techniques are dedicated to extracting heavy metal ions from diverse wastewater origins, encompassing coagulation/flocculation, precipitation, flotation, and ion exchange. Their cost, side toxicity, or ineffectiveness often limit their large-scale use. Due to their adaptable design, simple operation, and reasonable cost, membrane filtration and adsorption have proven their efficiency in removing metals from wastewater. Recently, adsorption-based filters have appeared promising in treating water. Within this range, filters incorporating natural, synthetic, or hybrid adsorbents present an appealing alternative to conventional approaches. This review aims to list and describe the conventional and advanced wastewater treatment methods by comparing their efficiency, cost, and environmental impact. Adsorption-based filters were highlighted due to the significant advantages they can provide.

Application and development of foam extraction technology in wastewater treatment: A review

With the advancement of technology, wastewater treatment has become a significant challenge limiting the clean and sustainable development of chemical and metallurgical industries. Foam extraction, based on interfacial separation and mineral flotation, has garnered considerable attention as a wastewater treatment technology due to its unique physicochemical properties. Although considerable excellent accomplishments were reported, there still lacks a comprehensive summary of process features and contaminant removal mechanisms via foam extraction. According to the latest research progresses, the principles and characteristics of foam extraction technology, the classification and application of flotation reagents are systematically summarized in this work. Then comprehensively commented on the application fields and prospects of iterative flotation technology such as ion flotation, adsorption flotation and floating-extraction. The shortcomings and limitations of the current foam extraction technologies were discussed, and the feasible process intensification techniques were highlighted. This review aims to enchance the understanding of the foam extraction mechanism, and provides guidance for the selection appropriate reagents and foam extraction technologies in wastewater treatment.

Molecular engineering of a new method for effective removal of cadmium from water

Cadmium (Cd) is a widespread and highly toxic environmental pollutant, seriously threatening animal and plant growth. Therefore, monitoring and employing robust tools to enrich and remove Cd from the environment is a major challenge. In this work, by conjugating a fluorescent indicator (CCP) with a functionalized glass slide, a special composite material (CCPB) was constructed to enrich, remove, and monitor Cd2+ in water rapidly. Then Cd2+ could be effectively eluted by immersing the Cd-enriched CCPB in an ethylenediaminetetraacetic acid (EDTA) solution. With this, the CCPB was continuously reused. Its recovery of Cd2+was above and below 100 % after multiple uses by flame atomic absorption spectrometry (FAAS), which was excellent for practical use in enriching and removing Cd2+ in real aqueous samples. Therefore, CCPB is an ideal material for monitoring, enriching, and removing Cd2+ in wastewater, providing a robust tool for future practical applications of Cd enrichment and removal in the environment.

Highly selective ion precipitation flotation for ternary Co-Zn-Mn separation: Stepwise chelation capture of Co and Zn from simulated zinc hydrometallurgy wastewater

Ion precipitation flotation technology was demonstrated to be an efficient method for the separation of valuable metals from low-concentration solution. However, the selective separation of three metals from mixing solution is a great challenge, and highly selective reagents are the key to polymetallic separation. In this work, stepwise separation of Co and Zn from the simulated zinc hydrometallurgy wastewater containing ternary Co-Zn-Mn metals by ion precipitation flotation process was proposed. It's demonstrated that organic reagents of 1-nitroso-2-naphthol (NN) and sodium dimethyldithiocarbamate (SDDC) had excellent selectivity for the capture of Co and Zn to form respective precipitate from wastewaters via the chelation reactions. After precipitation, dodecylpyridinium chloride (DPC) and tetradecyltrimethylammonium bromide (TTAB) were chosen as surfactants for the separation of Co and Zn sediments from the solution via the flotation process. The effects of solution pH, molar ratio, reaction temperature, and reaction time on the selective precipitation efficiencies of Co and Zn as well as the effects of surfactant dosage and flotation gas velocity on the flotation separation efficiencies were systematically investigated. It's demonstrated that the comprehensive recovery rates of Co, Mn, and Zn reach 98%, 90%, and 99%, respectively. After separation, oxidation calcination of the foam products was conducted to prepare high-purity Co3O4 and ZnO nanoparticles in which the organic matters were burnt out with gas emissions. The stepwise chelation capture mechanisms of Co and Zn by highly selective precipitation reagents were minutely discussed. It's demonstrated that the proposed selective stepwise precipitation and flotation method is suitable for recovery of critical metal ions from low-concentration polymetallic wastewaters.

Industrial application of microbubble generation methods for recovering fine particles through froth flotation: A review of the state-of-the-art and perspectives

The depletion of high-grade and coarse-grain ores has led to an increasing demand for the development of efficient separation technologies for low-grade and fine-grain ores. However, conventional froth flotation techniques are not adequate to efficiently recover fine and ultrafine particles (typically <10-15 μm) due to the low collision probability between these particles and the relatively large bubbles used in the process. The introduction of microbubbles has shown promise in enhancing particle recovery, making it a subject of significant interest. Thus, this review focuses on microbubble generation methods that have the potential to be scaled up for industrial applications, with a specific emphasis on their suitability for froth flotation. The methods are categorized based on their scalability: high-hydrodynamic cavitation, porous media/medium-dissolved air, electrolysis/low-microfluidics, and acoustic methods. The bubble generation mechanisms, characteristics, advantages and limitations of each method and its applications in froth flotation are discussed to provide suggestions for improvement. There is still no appropriate technology that can optimize bubble size distribution, production rate and cost together for industrial froth flotation application. Therefore, novel approaches of combining multiple methods are also explored to achieve the potential synergic effects. By addressing the limitations of current microbubble generation methods and proposing potential enhancements, this review aims to contribute to the development of efficient and cost-effective microbubble generation technologies for fine and ultrafine particles in the froth flotation industry.

Is Micellar Catalysis Green Chemistry?

Many years ago, twelve principles were defined for carrying out chemical reactions and processes from a green chemistry perspective. It is everyone's endeavor to take these points into account as far as possible when developing new processes or improving existing ones. Especially in the field of organic synthesis, a new area of research has thus been established: micellar catalysis. This review article addresses the question of whether micellar catalysis is green chemistry by applying the twelve principles to micellar reaction media. The review shows that many reactions can be transferred from an organic solvent to a micellar medium, but that the surfactant also has a crucial role as a solubilizer. Thus, the reactions can be carried out in a much more environmentally friendly manner and with less risk. Moreover, surfactants are being reformulated in their design, synthesis, and degradation to add extra advantages to micellar catalysis to match all the twelve principles of green chemistry.

Comparative Study of Different Ion-Exchange Membrane Types in Diffusion Dialysis for the Separation of Sulfuric Acid and Nickel Sulfate

The possibility of using various types of ion-exchange membranes in diffusion dialysis for the separation of sulfuric acid and nickel sulfate has been evaluated. The process of the dialysis separation of a real waste solution from an electroplating facility containing 252.3 g/L of sulfuric acid, 20.9 g/L of nickel ions and small amounts of zinc, iron, copper ions, etc. has been studied. Heterogeneous cation-exchange membrane containing sulfonic groups and heterogeneous anion-exchange membranes with different thicknesses (from 145 μm to 550 μm) and types of fixed groups (four samples with quaternary ammonium base and one sample with secondary and tertiary amines) have been used. The diffusion fluxes of sulfuric acid, nickel sulfate, and the total and osmotic fluxes of the solvent have been determined. The use of a cation-exchange membrane does not allow the separation of the components, since the fluxes of both components are low and comparable in magnitude. The use of anion-exchange membranes makes it possible to efficiently separate sulfuric acid and nickel sulfate. Anion-exchange membranes with quaternary ammonium groups are more effective in the diffusion dialysis process, while the thin membrane turns out to be the most effective.

Salt Transport in Crosslinked Hydrogel Membranes Containing Zwitterionic Sulfobetaine Methacrylate and Hydrophobic Phenyl Acrylate

Produced water is a by-product of industrial operations, such as hydraulic fracturing for increased oil recovery, that causes environmental issues since it includes different metal ions (e.g., Li+, K+, Ni2+, Mg2+, etc.) that need to be extracted or collected before disposal. To remove these substances using either selective transport behavior or absorption-swing processes employing membrane-bound ligands, membrane separation procedures are promising unit operations. This study investigates the transport of a series of salts in crosslinked polymer membranes synthesized using a hydrophobic monomer (phenyl acrylate, PA), a zwitterionic hydrophilic monomer (sulfobetaine methacrylate, SBMA), and a crosslinker (methylenebisacrylamide, MBAA). Membranes are characterized according to their thermomechanical properties, where an increased SBMA content leads to decreased water uptake due to structural differences within the films and to more ionic interactions between the ammonium and sulfonate moieties, resulting in a decreased water volume fraction, and Young’s modulus increases with increasing MBAA or PA content. Permeabilities, solubilities, and diffusivities of membranes to LiCl, NaCl, KCl, CaCl2, MgCl2, and NiCl2 are determined by diffusion cell experiments, sorption-desorption experiments, and the solution-diffusion relationship, respectively. Permeability to these metal ions generally decreases with an increasing SBMA content or MBAA content due to the corresponding decreasing water volume fraction, and the permeabilities are in the order of K+ > Na+ > Li+ > Ni2+ > Ca2+ > Mg2+ presumably due to the differences in the hydration diameter.

Preferential Removal of Alkali Metal Using Dodecanoic Acid and Sodium Dodecyl Sulfate in Foam Separation System

The selectivity of adsorption between alkali metal ions (Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺) based on the ionic functional groups of the surfactants was studied using two types of surfactants, dodecanoic acid (DA) and sodium dodecyl sulfate (SDS), in the foam separation system. The results showed that Li⁺ was preferably removed by foam separation using DA. The removal rates of other alkali metal ions were relatively low, and there were no significant differences among other alkali metal ions (Na⁺, K⁺, Rb⁺, and Cs⁺). However, Cs⁺ exhibited the highest removal rate among the mixed alkali metals by foam separation using SDS. From these results, the selectivity of the alkali metal in foam separation was dependent on the type of surfactant.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Evaluation of process condition impact on copper and lead ions removal from water using goethite incorporated nanocomposite ultrafiltration adsorptive membranes

Polyacrylonitrile (PAN) adsorptive membrane incorporated with nanosize-goethite (α-FeO(OH)) hydrous metal oxide particles (GNPs), prepared with optimal flux and Cu(II) removal in the previous study, was used to evaluate the process parameter on the Cu(II) removal. Box-Behnken Design (BBD) based on the Response Surface Methodology (RSM) was employed to evaluate the impact of Cu(II) feed solution characteristics such as pH, initial concentration of metal ion, and transmembrane pressure (TMP) on copper removal efficiency. The outcomes indicated that the RSM optimization technique could be utilized as an applicable method to find the optimum condition for the maximum Cu(II) removal with slight variance compared with the experimentally measured data. The effect of each process parameter and the coupling effect of parameters on the Cu(II) removal was assessed. Finally, the optimum condition of pH, Cu(II) concentration, and transmembrane pressure (TMP) to obtain high copper removal efficiency was decided. In the optimum condition of the Cu(II) removal, the removal of lead (Pb(II)) metal ion was evaluated by the same membrane.

Recent advancements in the removal/recovery of toxic metals from aquatic system using flotation techniques

The paramount cause of water scarcity is pollution, which is becoming a massive issue since the last century. Besides, it is evident that water pollution is the main cause of emerging contaminants that are left untreated from industries, can cause serious threats to humans and biota as well. One of the best ways in remediating pollutants and finding a way for generating useable water is to use this contaminated water after the necessary treatment. Heavy metals are of major concern in treatment because of their toxicity, non-biodegradability, carcinogenicity, and they can cause inevitable damages even at low concentrations. In this review article, available different flotation techniques are discussed to address this issue. Flotation tends to be one of the promising techniques that have shown a high scope because of its high produce, low sludge formation, and ease of operation. From the several pieces of literature, it can be inferred that the flotation process can be conducted in one step, and that does not need any expensive materials. Further, this paper deliberates the versatility of each process in disclosing its advantages, limitations, further scope of research and fills the loopholes in the process for better effectiveness. Overall, flotation is a highly probable as well as effective treatment technology to eradicate noxious pollutants present in wastewater and thus helps to compromise environmental and social sustainability.

Removal of uranium from contaminated groundwater using monorhamnolipids and ion flotation

Mining of uranium for defense-related purposes has left a substantial legacy of pollution that threatens human and environmental health. Contaminated waters in the arid southwest are of particular concern, as water resource demand and water scarcity issues become more pronounced. The development of remediation strategies to treat uranium impacted waters will become increasingly vital to meet future water needs. Ion flotation is one technology with the potential to address legacy uranium contamination. The green biosurfactant rhamnolipid has been shown to bind uranium and act as an effective collector in ion flotation. In this study, uranium contaminated groundwater (∼440 μg L-1 U) from the Monument Valley processing site in northeast Arizona was used as a model solution to test the uranium removal efficacy of ion flotation with biosynthetic (bio-mRL) and three synthetic monorhamnolipids with varying hydrophobic chain lengths: Rha-C10-C10, Rha-C12-C12, and Rha-C14-C14. At the groundwater's native pH 8, and at an adjusted pH 7, no uranium was removed from solution by any collector. However, at pH 6.5 bio-mRL and Rha-C10-C10 removed 239.2 μg L-1 and 242.4 μg L-1 of uranium, respectively. By further decreasing the pH to 5.5, bio-mRL was able to reduce the uranium concentration to near or below the Environmental Protection Agency maximum contaminant level of 30 μg L-1. For the Rha-C12-C12 and Rha-C14-C14 collector ligands, decreasing the pH to 7 or below reduced the foam stability and quantity, such that these collectors were not suitable for treating this groundwater. To contextualize the results, a geochemical analysis of the groundwater was conducted, and a consideration of uranium speciation is described. Based on this study, the efficacy of monorhamnolipid-based ion flotation in real world groundwater has been demonstrated with suitable solution conditions and collectors identified.

Removal of Cd (II) Ions from Bioretention System by Clay and Soil Wettability

In this work, a silane modifier with benzyl substitutes (OFS-B) and linear substitutes (OFS-L) was used to modify bentonite clay and soil, and the results were characterized by Fourier transform-infrared absorption spectroscopy (FT-IR) and powder-X-ray diffraction (XRD) analysis. A contact angle analysis was performed to determine the wettability of modified clay and soil. The findings revealed that silane-modified OFS-L clay and soil produced wettable surfaces, while OFS-B exhibited hydrophobic properties. These clays and soils were used in a bioretention system for Cd (II) removal. In the study, seven different types of bioretention systems, including natural, OFS-L, and OFS-B modified clay and soil, as well as natural, OFS-L, and OFS-B modified soil, were applied to Cyperus alternifolius plants without an additional layer. The removal capacity of Cd (II) was measured in the following order: modified clay > modified soil > original clay/soil > no layer, i.e., 99.48%, 92.22%, 88.10/78.5%, and 30.0%, respectively. OFS-L removed more Cd (II) than OFS-B during the modification. OFS-L now improves the bioavailability and accumulation of Cd (II) in the plant (18.5 µg/g) and has a higher chlorophyll-b concentration (1.92 mg/g fresh weight) than other systems. The wettable clay exhibited clay leaching into the various levels of the bioretention system. In the bioretention system, benzyl substituted clay prevented the penetration of water and formed a Cd (II) agglomeration. When compared to non-wettable modifiers, these results indicated that wettable clay material could be a capable material for removing Cd (II).

Removal of Fe(III), Cd(II), and Zn(II) as Hydroxides by Precipitation–Flotation System

In this paper, a combined precipitation–flotation system is proposed for the removal of Fe(III), Zn(II), and Cd(II) as hydroxides. The efficiency of precipitation, as a function of pH, metal ion concentration, and dosage of the precipitating agent as the main variables, was evaluated. The results showed that 99% efficiency was attained from a mixture solution containing the three metal ions in sulfate media at pH 10.3 after 15 min of treatment. The sedimentation behavior showed that a larger precipitate facilitated solid/liquid separation at 30 min. The characterization of precipitates was performed by X-ray diffraction (XRD) identifying iron, zinc, and cadmium oxides; hydroxides; and sodium sulfate. For the flotation, a 20 mg/L solution of dodecylamine (DDA) was used as a collector. Such a solution allowed for the removal of 76% of precipitates in concentrate. An increase in the collector concentration diminished the float percentage due to the micelle formation and low adsorption of the collector on the surface of the precipitate. The results provide evidence of the effectivity of the removal of metal ions by the combined precipitation–flotation system as an alternative for the treatment of acid mine drainage (AMD) in less time in comparison with a sedimentation stage.

Sustainable approach on removal of toxic metals from electroplating industrial wastewater using dissolved air flotation

This research paper concentrates on the removal of heavy metal from wastewater which was produced from an electroplating industry. Here, the Dissolved Air Flotation (DAF) treatment process is carried out to remove toxic metals such as chromium, cadmium, nickel, lead, and copper using Sodium Dodecyl Sulfate (SDS) as a collector. The best-optimized conditions for the maximum removal of all the metal ions about 97.39% was achieved at pH 8, contact time of 60 min, surfactant dosage of 0.2 g, and the pressure of 137.89 kPa. At optimized conditions, the treated water consists of 2.71 mg/L of chromium, 1.13 mg/L of cadmium, 10.24 mg/L of nickel, 0.06 mg/L of lead, and 1.14 mg/L of copper. The used surfactant SDS was found as an environmentally friendly compound as prescribed by the Environmental Protection Agency. It is inferred that the flotation kinetics that manifests the rate of recovery and time for all the metal ions follow first-order kinetics. Further, the removal rate constant (k) increases with decreasing the initial metal ion concentration. Overall, the result of this work propounds that the DAF process plays as a promising technique to eliminate noxious pollutants from the wastewater.

Recent advancements of spinel ferrite based binary nanocomposite photocatalysts in wastewater treatment

A lot of studies on spinel ferrites (MFe₂O₄, M = divalent metal ion) and their binary nanocomposites as photocatalysts in the decontamination of wastewater have been performed, because MFe₂O₄ nanoparticles are relatively stable, biocompatible and low-cost efficient photocatalyst. The separation of MFe₂O₄ photocatalyst is easy owing to its excellent magnetic behavior. With this background, the recent developments on photocatalytic performances of MFe₂O₄ based binary nanocomposites were comprehensively reviewed. Especially, a focus on MFe₂O₄/metal oxides, MFe₂O₄/carbon based materials, MFe₂O₄/polymers, MFe₂O₄/metal nanoparticles and MFe₂O₄/other compounds for the photocatalytic degradation of dyes, emerging contaminants and inorganic pollutants has been thoroughly given. The advantages of MFe₂O₄ based nanocomposites as photocatalysts were also discussed. In addition, the possible pathway of active free radical generation by these photocatalysts under visible and ultraviolet irradiation has been explained. A comparison of photocatalytic activities of MFe₂O₄ based binary nanocomposites with recent reports has been carried out. This review concludes that MFe₂O₄ based binary nanocomposites have potential capacity in water purification technology. Nevertheless, their practical utilization in water treatment plants still needs to be further studied.

The surface potential explains ion specific bubble coalescence inhibition

HYPOTHESIS

Some ions can prevent bubbles from coalescing in water. The Gibbs-Marangoni pressure has been proposed as an explanation of this phenomenon. This repulsive pressure occurs during thin film drainage whenever surface enhanced or surface depleted solutes are present. However, bubble coalescence inhibition is known to depend on which particular combination of ions are present in a peculiar and unexplained way. This dependence can be explained by the electrostatic surface potential created by the distribution of ions at the interface, which will alter the natural surface propensity of the ions and hence the Gibbs-Marangoni pressure.

CALCULATIONS

A generalised form of the Gibbs-Marangoni pressure is derived for a mixture of solutes and the modified Poisson-Boltzmann equation is used to calculate this pressure for five different electrolyte solutions made up of four different ions.

FINDINGS

Combining ions with differing surface propensities, i.e., one enhanced and one depleted, creates a significant electrostatic surface potential which dampens the natural surface propensity of these ions, resulting in a reduced Gibbs-Marangoni pressure, which allows bubble coalescence. This mechanism explains why the ability of electrolytes to inhibit bubble coalescence is correlated with surface tension for pure electrolytes but not for mixed electrolytes.

Simultaneous Removal of Al, Cu and Zn Ions from Aqueous Solutions Using Ion and Precipitate Flotation Methods

This paper presents the results of investigations concerning the simultaneous removal of Al(III), Cu(II), and Zn(II) from dilute aqueous solutions using ion and precipitate flotation methods. The effects of initial solution pH, surface active substance concentration, and the gas velocity on the flotations’ efficiency and course are studied. Experimental results are discussed in terms of physicochemical aspects related to aqueous solutions of metal salts. The results indicate that satisfying simultaneous flotations of aluminum, copper and zinc species are observed if the pH value ranges between 7.0 and 9.0. It was found that an increase in collector concentration results in a decrease in the flotation rate constants. An increase in the gas velocity results in an increase in the ion and precipitate flotation rates.

The effect of cationic surfactants on improving natural clinoptilolite for the flotation of cesium

Flotation using cationic surfactants has been investigated as a rapid separation technique to dewater clinoptilolite ion exchange resins, for the decontamination of radioactive cesium ions (Cs⁺) from nuclear waste effluent. Initial kinetic and equilibrium adsorption studies of cesium, suggested the large surface area to volume ratio of the fine zeolite contributed to fast adsorption kinetics and high capacities (q_c = 158.3 mg/g). Adsorption of ethylhexadecyldimethylammonium bromide (EHDa-Br) and cetylpyridinium chloride (CPC) surfactant collectors onto both clean and 5 ppm Cs⁺ contaminated clinoptilolite was then measured, where distribution coefficients (K_d) as high as 10,000 mL/g were evident with moderate concentrations CPC. Measurements of particle sizes confirmed that adsorption of surfactant monolayers did not lead to significant aggregation of the clinoptilolite, while < 8% of the 5 ppm contaminated cesium was remobilised. Importantly for flotation, both the recovery efficiency and dewatering ratios were measured across various surfactant concentrations. Optimum conditions were found with 0.5 mM of CPC and addition of 30 μL of MIBC frother, giving a recovery of ∼90% and a water reduction ratio > 4, highlighting the great viability of flotation to separate and concentrate the contaminated powder in the froth phase.

Removal of heavy metals in medical waste incineration fly ash by Na2EDTA combined with zero-valent iron and recycle of Na2EDTA: Acolumnar experiment study

In this study, an effective circulating system was developed to remove heavy metals in medical waste incineration (MWI) fly ash. MWI fly ash (MWIFA)-column experiments were performed to remove Cu, Pb, Zn, Cd, and Ni from MWIFA using EDTA disodium (Na₂EDTA). Iron-column experiments were conducted to study the removal effect of zero-valent iron on the five heavy metals from washing wastewater. Toxicity Characteristic Leaching Procedure (TCLP) test method was employed to evaluate heavy metals toxicity of MWIFA residues generated after 0-0.2 mol/L Na₂EDTA solution treated. After being washed by 0.2 mol/L Na₂EDTA solution, TCLP leaching values of Cu, Pb, Zn, Cd, and Ni were the lowest and satisfied the standard (GB 5085.3-2007), and the leaching values were 58.4 ± 2.0 mg/L, 2.81 ± 0.14 mg/L, 64.3 ± 4.0 mg/L, 0.156 ± 0.005 mg/L, 0.381 ± 0.006 mg/L. Concentrations of Cu, Pb, Zn, Cd, and Ni in iron-column effluent were reduced by 99.7%, 91.6%, 91.6%, 75.4%, and 75.7%, respectively. Na₂EDTA was recovered and recycled to the removal of heavy metals from MWIFA. Comparing new Na₂EDTA solution with recycled Na₂EDTA solution, recycled Na₂EDTA and water could be reutilized to dispose MWIFA. The removal efficiencies of Cu, Pb, Zn, Cd, and Ni by recycled 0.2 mol/L Na₂EDTA solution were 67.1%, 68.8%, 63.2%, 73.9%, 50.7%, respectively, the removal efficiencies using recovered Na₂EDTA decreased by 2.6%, 3.9%, 3.3%, 4.2%, and 1.6%, respectively. Successive batch experiments were also conducted to evaluate industrialization potential and reusable times for recycled Na₂EDTA. After four recirculation cycles, extraction efficiencies of Pb and Cd (removal efficiency at different cycles divided by removal efficiency of new Na₂EDTA) declined toward 80%. Results from this research indicated that this circulating system possessed industrialization potential. Implications: An effective circulating system was developed to remove heavy metals in MWI fly ash (MWIFA). Integration of Na₂EDTA with Fe⁰ promoted the removal of heavy metals from MWIFA. Na₂EDTA, NaCl and water were stepwise extracted from iron-column effluent, respectively. Recovered Na₂EDTA can still effectively remove heavy metals from MWIFA. Results from this research indicated that this circulating system possessed industrialization potential.

Nanotreatment and Nanodiagnosis of Prostate Cancer: Recent Updates

The fabrication and development of nanomaterials for the treatment of prostate cancer have gained significant appraisal in recent years. Advancements in synthesis of organic and inorganic nanomaterials with charge, particle size, specified geometry, ligand attachment etc have resulted in greater biocompatibility and active targeting at cancer site. Despite all of the advances made over the years in discovering drugs, methods, and new biomarkers for cancer of the prostate (PCa), PCa remains one of the most troubling cancers among people. Early on, effective diagnosis is an essential part of treating prostate cancer. Prostate-specific antigen (PSA) or serum prostate-specific antigen is the best serum marker widely accessible for diagnosis of PCa. Numerous efforts have been made over the past decade to design new biosensor-based strategies for biomolecules detection and PSA miniaturization biomarkers. The growing nanotechnology is expected to have a significant effect in the immediate future on scientific research and healthcare. Nanotechnology is thus predicted to find a way to solve one of the most and long-standing problem, "early cancer detection". For early diagnosis of PCa biomarkers, different nanoparticles with different approaches have been used. In this review, we provide a brief description of the latest achievements and advances in the use of nanoparticles for PCa biomarker diagnosis.

Comparative life cycle assessment of two ceramsite production technologies for reusing municipal solid waste incinerator fly ash in China

Harmless treatment and reuse of municipal solid waste incinerator fly ash are challenging. Two reuse technologies of converting incinerator fly ash to ceramsites via rotary kiln sintering and non-sintering have been demonstrated in China. Field monitoring results reveal that the destruction efficiency of PCDD/Fs are both higher than 99% in two processes. The leaching rate of heavy metals in both ceramsite products, their pollutant emissions in production process meet the standards. Environmental impacts of two ceramsite products were compared using life cycle assessment approach. Rotary kiln sintering ceramsite has lower environmental impacts in most categories and delivers a smaller integrated impacts index than non-sintering ceramsite. For rotary kiln sintering ceramsite, transportation, electricity and curing agent in dust disposal are the most significant contributors to most of environmental impacts categories results, accounting for 33.7%, 29.0% and 24.6% to the integrated impacts index, respectively. For non-sintering ceramsite, curing agent and electricity contribute 69.6% and 15.8% to the integrated impacts index, respectively. Based on these life cycle assessment results, recommendations for current plant operation and new plants planning are proposed.

Synthesis of sewage sludge-based carbon/TiO2 /ZnO nanocomposite adsorbent for the removal of Ni(II), Cu(II), and chemical oxygen demands from aqueous solutions and industrial wastewater

The removal of heavy metal ions and organic materials from wastewater due to their toxicity is necessary. In the present study, the titanium dioxide/zinc oxide (TiO₂ /ZnO) nanocomposite has been coated on the sewage sludge carbon (SSC) surface and its application was investigated for the adsorption of Ni(II), Cu(II), and chemical oxygen demands (COD) reduction from aqueous solutions and industrial wastewaters in Eshtehard, Iran. The effect of adsorption parameters in a single system such as TiO₂ /ZnO ratio, TiO₂ /ZnO concentration, pH, adsorbent dosage, contact time, ionic strength, temperature, and initial concentrations of Ni(II), Cu(II), and COD was investigated on the adsorption capacity of synthesized SSC/TiO₂ /ZnO adsorbent. The pseudo-second order and Redlich-Peterson isotherm models were best described the kinetic and equilibrium data of Ni(II), Cu(II), and COD sorption. The maximum monolayer sorption capacities of Ni(II), Cu(II), and COD were found to be 62.3, 75.1, and 1,120.3 mg/g, respectively. The central composite design was used to investigate the interaction effects of pH and initial concentrations of Ni(II), Cu(II), and COD on the simultaneous removal of Ni(II), Cu(II), and COD from aqueous solutions in a ternary system. The potential of synthesized SSC/TiO₂ /ZnO adsorbent was investigated for Ni(II), Cu(II), and COD adsorption from industrial wastewaters of Iran. PRACTITIONER POINTS: The novel sewage sludge carbon/TiO₂ /ZnO adsorbent was synthesized. Adsorption of Ni(II), Cu(II), and chemical oxygen demands (COD) from industrial wastewaters was investigated. Maximum Ni(II), Cu(II), and COD sorption capacities were 62.3, 75.1, and 1,120.3 mg/g. Simultaneous removal of Ni(II), Cu(II), and COD was investigated in a ternary system.

Recent Advances in Applications of Hybrid Graphene Materials for Metals Removal from Wastewater

The presence of traces of heavy metals in wastewater causes adverse health effects on humans and the ecosystem. Adsorption is a low cost and eco-friendly method for the removal of low concentrations of heavy metals from wastewater streams. Over the past several years, graphene-based materials have been researched as exceptional adsorbents. In this review, the applications of graphene oxide (GO), reduce graphene oxide (rGO), and graphene-based nanocomposites (GNCs) for the removal of various metals are analyzed. Firstly, the common synthesis routes for GO, rGO, and GNCs are discussed. Secondly, the available literature on the adsorption of heavy metals including arsenic, lead, cadmium, nickel, mercury, chromium and copper using graphene-based materials are reviewed and analyzed. The adsorption isotherms, kinetics, capacity, and removal efficiency for each metal on different graphene materials, as well as the effects of the synthesis method and the adsorption process conditions on the recyclability of the graphene materials, are discussed. Finally, future perspectives and trends in the field are also highlighted.

Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

The shortage of water resources and increasingly serious water pollution have driven the development of high-efficiency water treatment technology. Among a variety of technologies, adsorption is widely used in environmental remediation. As a class of typical adsorbents, metal oxides have been developed for a long time and continued to attract widespread attention, since they have unique physicochemical properties, including abundant surface active sites, high chemical stability, and adjustable shape and size. In this review, the basic principles of the adsorption process will be first elucidated, including affecting factors, evaluation index, adsorption mechanisms, and common kinetic and isotherm models. Then, the adsorption properties of several typical metal oxides, and key parameters affecting the adsorption performance such as particle/pore size, morphology, functionalization and modification, supports and calcination temperature will be discussed, as well as their application in the removal of various inorganic and organic contaminants. In addition, desorption and recycling of the spent adsorbent are summarized. Finally, the future development of metal oxide based adsorbents is also discussed.

Preparation of Micro-Nano Material Composed of Oyster Shell/Fe3O4 Nanoparticles/Humic Acid and Its Application in Selective Removal of Hg(II)

Micro-nano composite material was prepared to adsorb Hg(II) ions via the co-precipitation method. Oyster shell (OS), Fe3O4 nanoparticles, and humic acid (HA) were used as the raw materials. The adhesion of nanoparticles to OS displayed by scanning electron microscopy (SEM), the appearance of the (311) plane of standard Fe3O4 derived from X-ray diffraction (XRD), and the transformation of pore sizes to 50 nm and 20 μm by mercury intrusion porosimetry (MIP) jointly revealed the successful grafting of HA-functionalized Fe3O4 onto the oyster shell surface. The vibrating sample magnetometer (VSM) results showed superparamagnetic properties of the novel adsorbent. The adsorption mechanism was investigated based on X-ray photoelectron spectroscopy (XPS) techniques, which showed the process of physicochemical adsorption while mercury was adsorbed as Hg(II). The effects of pH (3-7), initial solution concentration (2.5-30 mg·L-1), and contact time (0-5 h) on the adsorption of Hg(II) ions were studied in detail. The experimental data were well fitted to the Langmuir isotherm equation (R2 = 0.991) and were shown to follow a pseudo-second-order reaction model (R2 = 0.998). The maximum adsorption capacity of Hg(II) was shown to be 141.57 mg·g-1. In addition, this new adsorbent exhibited excellent selectivity.

Comprehensive evaluation on a prospective precipitation-flotation process for metal-ions removal from wastewater simulants

Toxic metal pollutants threaten water environment. It exists undesirably metal-ion concentration limits with conventional precipitation flotation. An enhanced precipitation flotation system focusing on efficient removal for bivalent metal-ions was researched. The system involved the addition of humics and Fe³⁺ to generate and regulate the precipitates. The characteristics of precipitates were investigated by particle analysis, conditional stability constants and DLVO theory calculations, and SEM&TEM imaging. The results reveal that metal-ions chelate with humics at low metal-ion concentration, with generating the limited micro-size precipitates of <2.0 μm, fractal dimension of 1.60-1.80 and precipitate efficiency of <91.00%. By adding trivalent Fe³⁺, the macro-size precipitates are obtained with particle size of approximate 10.0 μm, fractal dimension of 1.50-1.60, and nearly-total flotation removal of precipitate. The chelating interaction of Fe³⁺ with humics is the mainly regulating mechanism, which could enhance the conditional stability constants and the precipitate efficiency of metal-ions at low concentration. The desired precipitate particles are finally obtained by breaking the limitations of metal-ion concentration. Finally, the flotation removal of metal-ions from single or mixed solutions is respectively 99.10 ± 0.10% for Cu²⁺, 99.60 ± 0.10% for Pb²⁺, and 94.30 ± 0.30% for Zn²⁺. Therefore, the enhanced precipitation flotation process is an efficient purification approach for metal-containing wastewaters.

The Flotation Process Can Go Green

In today’s world of environmental strain, wastewater treatment has become a, more or less, conventional application of flotation—as for instance, in the oil, food, or chemical industries, and in potable water treatment. In this paper, different flotation methods (such as ion, adsorbing colloid, and adsorptive flotation, including biosorption) and techniques will be reviewed; and, in order to explain them further, several applications of these from the laboratory (General and Inorganic Chemical Technology) at Aristotle University of Thessaloniki, Greece (AUTh) will be presented and analyzed, with the main focus on sustainability. The application of flotation as a separation process, when applied in pollution control or during water treatment, was often criticized due to the possible toxicity of the applied collectors; however, the use of biosurfactants may alleviate this concern and enhance its further acceptability.