Algal biochar reinforced trimetallic nanocomposite as adsorptional/photocatalyst for remediation of malachite green from aqueous medium

Advances in sustainable production and applications of nano-biochar

Biochar is a carbonaceous material that can be amplified into nano-biochar (N-BC) using different physicochemical techniques. Contrary to bulk biochar, nano-biochar, and have better physicochemical characteristics, including a large specific surface area, pore properties, distinctive nanostructure, and high catalytic activity. The spotlight of this review is to contribute up-to-date information on the scaling up of biochar into nano-biochar through various sustainable techniques. This review paper is a compilation of research on nano-biochar from biochar including preparation, distinctive characteristics, and intended applications in the environmental and agricultural sectors, along with some other cutting-edge applications, which are all covered in detail in this review paper and also provides the knowledge gap that will be useful for future investigation and development.

N-doped lignin-based activated carbon aerogel derived from bamboo black pulp liquor for efficient removal of malachite green in wastewater

In this study, a lignin-based aerogel (LA) was prepared through acid precipitation of BPBL, followed by sol-gel method and freeze-drying. Additionally, a one-step activation-carbonization method was used to acquire nitrogen-doped lignin-based activated carbon aerogel (NLACA). The adsorption and catalytic degradation performance for malachite green (MG) were examined. The specific surface area of NLACA after N-doping was 2644.5 m2/g. The adsorption capacity for MG was increased to 3433 mg/g with the presence of nitrogenous functional groups on surface of NLACA compared without N-doping. Meanwhile, non-radical singlet oxygen is the primary active substance and degradation efficiency arrives at 91.8% after the catalytic degradation within 20 min and it has good stability and reuse. Three possible degradation pathways during degradation were analyzed by LC-MS technique. The adsorption isotherm and kinetic data demonstrated conformity with both the Langmuir model and the pseudo-second-order kinetic model. The primary mechanisms of the adsorption for MG dyes on NLACA include hydrogen bonding, π-π interactions, attraction of electrostatic and pore filling. Hence, NLACA derived from BPBL acts as a cost-effective and high-performance adsorbent and catalyst for removal of MG in dye wastewater. This concept introduces an innovative approach of "treatment of waste with waste" for developing a low-consumption, high-efficiency dye wastewater treatment and provides significant reference to treatment dye wastewater.

Synthesis, delineation and technological advancements of algae biochar for sustainable remediation of the emerging pollutants from wastewater-a review

The use of algae for value-added product and biorefining applications is enchanting attention among researchers in recent years due to its remarkable photosynthetic ability, adaptability, and capacity to accumulate lipids and carbohydrates. Algae biomass, based on its low manufacturing costs, is relatively renewable, sustainable, environmentally friendly and economical in comparison with other species. High production rate of algae provides a unique opportunity for its conversion to biochar with excellent physicochemical properties, viz. high surface area and pore volume, high adsorption capacity, abundant functional groups over surface, etc. Despite several potential algal-biochar, a detailed study on its application for removal of emerging contaminants from wastewater is limited. Therefore, this technical review is being carried out to evaluate the specific elimination of inorganic and organic pollutants from wastewater, with a view to assessing adsorption performances of biochar obtained from various algae species. Species-specific adsorption of emerging pollutants from wastewater have been discussed in the present review. The promising methods like pyrolysis, gasification, dry and wet torrefaction for the production of algae biochar are highlighted. The strategies include chemical and structural modifications of algae biochar for the removal of toxic contaminants have also been considered in the current work. The overall aim of this review is to confer about the synthesis, technological advancements, delineation and application of algae biochar for the treatment of wastewater.

The efficiency and mechanism of excess sludge-based biochar catalyst in catalytic ozonation of landfill leachate

In this study, biochar was produced based on dehydrated excess sludge from the municipal wastewater treatment plant, which was used for catalytic ozonation of pollutants derived from landfill leachate. The necessary catalytic sites in the structure of biochar were originated from the inorganic metals and organic matters in the sludge, which included a large number of functional groups (e.g., C-C, CO, etc.), adsorbed oxygen (Oads accounted for 44.82%) and electron defects (ID/IG=1.01). These active sites could promote the generation of reactive oxygen species (ROS) (e.g., ·OH,·O2-, etc.). The synergistic interaction between the microorganisms in the activated sludge also facilitated the removal rates of pollutants. Proteobacteria, Bacteroidetes, and Deinococcu-Thermus were crucial in the bioreactor. In 16 days of reaction, the removal ratios of NH+4-N and COD were 98.95 ± 0.11% and 90.89 ± 0.47%, respectively. This study not only explains the mechanism of catalytic ozonation of biochar, but also provides a new way of the practical treatment of landfill leachate.

Constructing a Visible-Active CoFe2O4@Bi2O3/NiO Nanoheterojunction as Magnetically Recoverable Photocatalyst with Boosted Ofloxacin Degradation Efficiency

Constructing visible-light-active Z-scheme heterojunctions has proven fruitful in enhancing the photocatalytic activity of photocatalysts for superior water clean-up. Herein, we report the fabrication of a CoFe2O4@Bi2O3/NiO (CBN) Z-scheme nanoheterojunction. The obtained CBN heterojunction was used for visible-light-assisted degradation of ofloxacin (OFL) in water. The OFL degradation efficiency achieved by the CBN heterojunction was 95.2% in 90 min with a rate constant of kapp = 0.03316 min-1, which was about eight times that of NiO and thirty times that of CoFe2O4. The photocatalytic activity of a Bi2O3/NiO Z-scheme heterojunction was greatly enhanced by the visible activity and redox mediator effect of the cobalt ferrite co-catalyst. Higher charge-carrier separation, more visible-light capture, and the Z-scheme mechanism in the Z-scheme system were the important reasons for the high performance of CBN. The scavenging experiments suggested ●O2- as an active species for superior OFL degradation. The possible OFL degradation pathway was predicted based on LC-MS findings of degradation intermediate products. The magnetic nature of the CBN helped in the recovery of the catalyst after reuse for six cycles. This work provides new insights into designing oxide-based heterojunctions with high visible-light activity, magnetic character, and high redox capabilities for potential practical applications in environmental treatment.

Impact of Biochar Application at Water Shortage on Biochemical and Physiological Processes in Medicago ciliaris

The application of biochar is mostly used to improve soil fertility, water retention capacity and nutrient uptake. The present study was conducted in order to study the impact of biochar at water deficiency conditions on the physiological and biochemical processes of Medicago ciliaris seedlings. Seedlings were cultivated under greenhouse conditions in pots filled with a mixture of soil and sand mixed in the presence or absence of 2% biochar. Plants of uniform size were subjected after a pretreatment phase (72 days) either to low (36% water holding capacity, water potential low) or high soil water potential (60% water holding capacity, water potential high). Pots were weighed every day to control and maintain a stable water holding capacity. In Medicago ciliaris, drought led to a significant reduction in plant growth and an increase in the root/shoot ratio. The growth response was accompanied by a decreased stomatal conductance and a reduction of the net CO₂ assimilation rate and water use efficiency. The associated higher risk of ROS production was indicated by a high level of lipid peroxidation, high antioxidant activities and high proline accumulation. Soil amendment with biochar enhanced the growth significantly and supported the photosynthetic apparatus of Medicago ciliaris species by boosting chlorophyll content and A_net both under well and insufficient watered plants and water use efficiency in case of water shortage. This increase of water use efficiency was correlated with the biochar-mediated decrease of the MDA and proline contents in the leaves buffering the impact of drought on photosynthetic apparatus by increasing the activity of enzymatic antioxidants SOD, APX, GPOX and GR and non-enzymatic antioxidants, such as AsA and DHAsA, giving the overall picture of a moderate stress response. These results confirmed the hypothesis that biochar application significantly reduces both the degree of stress and the negative impact of oxidative stress on Medicago ciliaris plants. These results implied that this species could be suitable as a cash pasture plant in the development of agriculture on dry wasteland in a future world of water shortages.

Co-metabolic biodegradation of structurally discrepant dyestuffs by Klebsiella sp. KL-1: A molecular mechanism with regards to the differential responsiveness

In this study, an attempt was made to decipher the underlying differential response mechanism of Klebsiella sp. KL-1 induced by exposure to disparate categories of dyestuffs in xylose (Xyl) co-metabolic system. Here, representative reactive black 5 (RB5), remazol brilliant blue R (RBBR) and malachite green (MG) belonging to the azo, anthraquinone and triphenylmethane categories were employed as three model dyestuffs. Klebsiella sp. KL-1 enabled nearly 98%, 80% or 97% removal of contaminants in assays Xyl + RB5, Xyl + RBBR or Xyl + MG after 48 h, which was respectively 16%, 11% or 22% higher than those in the assays devoid of xylose. LC-QTOF-MS revealed an increased formation of smaller molecular weight intermediates in assay Xyl + RB5, whereas more metabolic pathways were deduced in assay Xyl + RBBR. Metaproteomics analysis displayed remarkable proteome alteration with regards to the structural difference effect of dyestuffs by Klebsiella sp. KL-1. Significant (p-value<0.05) activation of pivotal candidate NADH-quinone oxidoreductase occurred after 48 h of disparate dyestuff exposure but with varying abundance. Dominant FMN-dependent NADH-azoreductase, Cytochrome d terminal oxidase or Thiol peroxidase were likewise deemed to be responsible for the catalytic cleavage of RB5, RBBR or MG, respectively. Further, the differential response mechanism towards the structurally discrepant dyestuffs was put forward. Elevated reducing force associated with the corresponding functional proteins/enzymes was transferred to the exterior of the cell to differentially decompose the target contaminants. Overall, this study was dedicated to provide in-depth insights into the molecular response mechanism of co-metabolic degradation of refractory and structurally discrepant dyestuffs by an indigenous isolated Klebsiella strain.

Green synthesis of silver nanoparticles from plant latex and their antibacterial and photocatalytic studies

The present work describes a facile synthesis of silver nanoparticles from calotropis procera (CP-AgNPs). The CP-AgNPs were well characterized by many methods. The synthesized CP-AgNPs are stable for more than 5 months. Then we have used CP-AgNPs as photo catalysts for the degradation of methyl orange (MO) dye. The photocatalytic degradation efficiency was 0.0076. Moreover, we also have studied the antibacterial activity against pseudomonas aeruginosa (PA), klebsiella pneumonia (KP), staphylococcus aureus (SA) and bacillus subtilis (BS) bacteria. Interestingly, all four different bacteria causing biofilm were inhibited by CP-AgNPs by 80%. To the best of our knowledge, this is the first report for the synthesis of silver nanoparticles from calotropis procera plant latex. Furthermore, CP-AgNPs effectively were applied as photo catalysts for the degradation of MO dye and also as anti-biofilm agents.

Algae-mediated antibiotic wastewater treatment: A critical review

The existence of continually increasing concentrations of antibiotics in the environment is a serious potential hazard due to their toxicity and persistence. Unfortunately, conventional treatment techniques, such as those utilized in wastewater treatment plants, are not efficient for the treatment of wastewater containing antibiotic. Recently, algae-based technologies have been found to be a sustainable and promising technique for antibiotic removal. Therefore, this review aims to provide a critical summary of algae-based technologies and their important role in antibiotic wastewater treatment. Algal removal mechanisms including bioadsorption, bioaccumulation, and biodegradation are discussed in detail, with using algae-bacteria consortia for antibiotic treatment, integration of algae with other microorganisms (fungi and multiple algal species), hybrid algae-based treatment and constructed wetlands, and the factors affecting algal antibiotic degradation comprehensively described and assessed. In addition, the use of algae as a precursor for the production of biochar is highlighted, along with the modification of biochar with other materials to improve its antibiotic removal capacity and hybrid algae-based treatment with advanced oxidation processes. Furthermore, recent novel approaches for enhancing antibiotic removal, such as the use of genetic engineering to enhance the antibiotic degradation capacity of algae and the integration of algal antibiotic removal with bioelectrochemical systems are discussed. Finally, some based on the critical review, key future research perspectives are proposed. Overall, this review systematically presents the current progress in algae-mediated antibiotic removal technologies, providing some novel insights for improved alleviation of antibiotic pollution in aquatic environments.

Biochar based photocatalyst for degradation of organic aqueous waste: A review

The advancement in the treatment technology for wastewater containing recalcitrant pollutants to lower the overall cost and time of the treatment processes is the prime demand. Biochar (BC) based photocatalyst have proved their potential application in the photo-degradation of a wide range of organic pollutants. The structural and chemical properties of the BC enhance the efficacy of photocatalyst, improving its optical properties with increased stability. This review gives an overview of the progress that occurred during the last five years in BC-based photocatalyst for degradation of recalcitrant organic waste in the aqueous system, emphasizing the role of BC in the photocatalytic performance with a brief discussion regarding the various sources of BC and different strategies used to modify the BC. Further, the critical challenges are discussed, which would be confronted during the scaling up and real-time application in wastewater treatment.

Synthesis and potential applications of trimetallic nanostructures

The present review highlights the synthetic strategies and potential applications of TMNs for organic reactions, environmental remediation, and health-related activities.

Algae bioprocess to deal with cosmetic chemical pollutants in natural ecosystems: A comprehensive review

Elevated demand and extensive exploitation of cosmetics in day-to-day life have hiked up its industrial productions worldwide. Organic and inorganic chemicals like parabens, phthalates, sulfates, and so forth are being applied as constituents towards the formulations, which tend to be the mainspring ecological complication due to their enduring nature and accumulation properties in various sections of the ecosystem. These cosmetic chemicals get accrued into the terrestrial and aquatic systems on account of various anthropogenic activities involving agricultural runoff, industrial discharge, and domestic effluents. Recently, the use of microbes for remediating persistent cosmetic chemicals has gained immense interest. Among different forms of the microbial community being applied as an environmental beneficiary, algae play a vital role in both terrestrial and aquatic ecosystems by their biologically beneficial metabolites and molecules, resulting in the biobenign and efficacious consequences. The use of various bacterial, fungal, and higher plant species has been studied intensely for their bioremediation elements. The bioremediating property of the algal cells through biosorption, bioassimilation, biotransformation, and biodegradation has made it favorable for the removal of persistent and toxic pollutants from the environment. However, the research investigation concerned with the bioremediation potential of the algal kingdom is limited. This review summarizes and provides updated and comprehensive insights into the potential remediation capabilities of algal species against ecologically hazardous pollutants concerning cosmetic chemicals.

Sustainable remediation of hazardous environmental pollutants using biochar-based nanohybrid materials

Biochar is a well-known carbon material with diversified functionalities and excellent physicochemical characteristics with high wastewater treatment potential. This review aims to summarize recent advancements in the development of biochar and biochar-based nanohybrid materials as a potential tool for the removal of harmful organic compounds such as synthetic dyes/effluents. The formation of biochar using pyrolysis of renewable feedstocks and their applications in various industries are explained hereafter. The characteristics and construction of biochar-based hybrid materials are explained in detail. Diversity of feedstocks, including municipal wastes, industrial byproducts, agricultural, and forestry residues, endows different biochar types with a wide structural variety. The production of cost-effective biochar drives the interest in manipulating biochars and induces desire functionality using nanoscale reinforcements. Various types of biochars, such as magnetic biochar, layered nanomaterial coated biochar, nanometallic oxide composites, chemically and physically functionalized biochar, have been produced. With the aid of nanomaterial, hybrid biochar exhibits a high potential to remove toxic contaminants. Depending upon biochar type, dyes/effluents can be removed via different mechanisms, including the Fenton process, photocatalytic degradation, π-π interaction, electrostatic interaction, and physical adsorption. In conclusion, desired physicochemical features, and tunable surface properties of biochar present high potential material in removing organic dyes and other effluents. The blended biochar with different materials/nanomaterials endows broader development and multi-functional opportunities for treating dyes/effluents.

Autonomous magnetic microbots for environmental remediation developed by organic waste derived carbon dots

Biodegradable precursors for micro/nanobots development are key requirements for several sustainable applications. In this regard, we propose an innovative solution for water purification at minimum cost and efforts where organic waste is used for the treatment of organic pollutants. Herein, catalytic magnetic microbots were developed by functionalizing iron oxide nanoparticles with carbon dots (C-Dots), which were synthesized by using household waste such as potato peels as precursors. The speed of these autonomously propelling bots indeed is found very promising for large distance swimming even in viscous medium by using hydrogen peroxide as fuel. These microbots catalytically propel and degrade toxic polar as well as sparingly water-soluble industrial dyes without any external agitation. The degradation of dyes was confirmed by mass-spectra analysis. Furthermore, these microbots can efficiently degrade a mixture of dyes and reused without compromising its performance significantly. Additionally, rate constant (K) and activation energy (E_a) were also determined to establish the catalytic nature of the bots. The present microbots acted as nanozyme owing to its synergistic catalytic activity of Fe₃O₄ and C-Dots for degradation of mixture of toxic dyes, essential for large scale water treatment.

Advances in the Application of Nanocatalysts in Photocatalytic Processes for the Treatment of Food Dyes: A Review

The use of food additives (such as dyes, which improve the appearance of the products) has become more prominent, due to the rapid population growth and the increase in demand for beverages and processed foods. The dyes are usually found in effluents that are discharged into the environment without previous treatment; this promotes mass contamination and alters the aquatic environment. In recent years, advanced oxidation processes (AOPs) have proven to be effective technologies used for wastewater treatment through the destruction of the total organic content of toxic contaminants, including food dyes. Studies have shown that the introduction of catalysts in AOPs improve treatment efficiency (i.e., complete decomposition without secondary contamination). The present review offers a quick reference for researchers, regarding the treatment of wastewater containing food dyes and the different types of AOPs, with different catalyst and nanocatalyst materials obtained from traditional and green chemical syntheses.

Insights into the mechanism of hydrogen peroxide activation with biochar produced from anaerobically digested residues at different pyrolysis temperatures for the degradation of BTEXS

The disposal of large amounts of biogas residue from anaerobically digested waste is a burden on environment protection. Porous biochars (BCs) were synthesized from biogas residue at three pyrolysis temperatures (300 °C, 550 °C, and 800 °C) and used to catalyze H₂O₂ for the degradation of benzene, toluene, ethylbenzene, xylene isomers (ortho, para, and meta), and styrene (BTEXS) to develop a new use for biogas residues. The prepared BCs were characterized through scanning electron microscopy, Brunauer-Emmett-Teller method, Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy. Results showed that BC800/H₂O₂ had the highest BTEXS degradation performance over 6 h. The degradation kinetic data were most consistent with the pseudo-second-order model. The different catalytic effect of the three BCs pyrolyzed at different temperatures were attributed to the dominant active sites (C-O/C-OH/C=C/C=O groups, pyridinic N, and graphitic N) that induced the production of reactive oxygen species (ROS). ROS-quenching experiments indicated that the degradation of BTEXS by BC300/H₂O₂, BC550/H₂O₂, and BC800/H₂O₂ involved ∙OH, ∙O₂^-, and ¹O₂. ∙OH was the dominant ROS in BC300/H₂O₂ and BC550/H₂O₂, and ¹O₂ was the dominant ROS in BC800/H₂O₂. Our findings provided new insight into the different catalytic mechanisms for BC production at different pyrolysis temperatures and demonstrated that a porous BC catalyst with high utilization value could be prepared from biogas residue and could hold considerable potential for application in BTEXS treatment in the future.

Peroxymonosulfate activation by tea residue biochar loaded with Fe3O4 for the degradation of tetracycline hydrochloride: performance and reaction mechanism

The recycling of agricultural and food waste is an effective way to reduce resource waste and ameliorate the shortage of natural resources. The treatment of antibiotic wastewater is a current research hotspot. In this study, waste tea residue was used as a raw material to prepare biochar (T-BC) and loaded with Fe3O4 as a catalyst to activate peroxymonosulfate (PMS) for oxidative degradation of tetracycline hydrochloride (TCH). Analysis techniques such as BET, SEM, XRD, FT-IR, XPS and VSM indicated that the heterogeneous catalyst (Fe3O4@T-BC) with good surface properties and magnetic properties was successfully prepared. The results of batch-scale experiments illustrated that when the dose of the Fe3O4@T-BC catalyst was 1 g L-1, the concentration of PMS was 1 g L-1, and the initial pH was 7, the degradation rate of TCH with a concentration of 50 mg L-1 reached 97.89% after 60 minutes of reaction. When the initial pH was 11, the degradation rate of TCH reached 99.86%. After the catalyst was recycled four times using an external magnet, the degradation rate of TCH could still reach 71.32%. The data of removal of TCH could be best fitted by a pseudo-first-order model. The analysis of the degradation mechanism through a free radical quenching experiment and EPR analysis, as well as the exploration of TCH intermediate products and reaction paths through the LC-MS method, all confirmed that the Fe3O4@T-BC prepared by this method is expected to become a cost-effective and environmentally friendly heterogeneous catalyst for activating persulfate degradation of tetracycline antibiotics.

Design and performance of a novel direct Z-scheme NiGa2O4/CeO2 nanocomposite with enhanced sonocatalytic activity

A novel direct Z-scheme NiGa₂O₄/CeO₂ nanocomposite was designed and prepared via simple sol-hydrothermal and calcination methods, and its sonocatalytic activity was tested by studying the degradation of a model antimicrobial agent, malachite green (MG), under ultrasonic irradiation. Near complete (96.2%) degradation of MG (at 10 mg/L) could be achieved by the NiGa₂O₄/CeO₂ nanocomposite (at 1.0 g/L) after ultrasonic irradiation (40 kHz, 300 W) for 60 min at 25 °C. Under the same conditions, only 51.2 and 72.0% of the MG degraded in the presence of NiGa₂O₄ and CeO₂ (at 1.0 g/L), respectively. These results demonstrate that the direct Z-scheme NiGa₂O₄/CeO₂ nanocomposite has excellent sonocatalytic activity, which is attributed to the matching band-gaps between NiGa₂O₄ and CeO₂. The sonocatalytic activity of NiGa₂O₄/CeO₂ nanocomposite decreased by 17% after four cycles of reuse, which is indicative of relatively good reusability. Scavenging experiments revealed that sonocatalytic degradation of MG results from the combined action of hydroxyl radicals (OH) and holes (h⁺), with the latter having a greater contribution. The pathways and mechanism of MG degradation were proposed based on the degradation intermediates detected. The results demonstrate that the prepared direct Z-scheme NiGa₂O₄/CeO₂ nanocomposite worked as designed and exhibited high and stable sonocatalytic activity during MG degradation, and could thus serve as a promising candidate in sonocatalytic treatment of other organic pollutants in wastewaters. The findings also provide new insights on the mechanism of sonocatalytic degradation and the design of efficient Z-scheme sonocatalysts.

P-nitrophenol degradation by pine-wood derived biochar: The role of redox-active moieties and pore structures

Biochar can both adsorb and degrade p-nitrophenol (PNP); however, the PNP degradation mechanism has not been well investigated. We prepared two biochars at pyrolysis temperatures of 500 °C (B500) and 700 °C (B700). Although B500 showed much stronger free radical signals (which are associated with organic degradation, according to previous studies), the apparent PNP degradation was approximately 3 times higher in the B700 system. The degradation increased significantly after the biochars were washed with water. According to a quantitative analysis of the sorption and degradation and two-compartment first-order kinetics modeling of the apparent removal kinetics, sorption occurred mainly in the initial period, whereas degradation continued throughout the removal process. The PNP degradation rate constant depended mainly on the external surface area at a relatively low concentration (200 mg/L) and was controlled by the microporous surface area at a relatively high concentration (800 mg/L). In addition, the apparent degradation did not depend on the biochar particle size. Therefore, PNP degradation may be related to the three-dimensional structure of the biochar in addition to the exposed external surface. The well-developed pore structure, more accessible surface, and larger electron exchange capacity of B700 may promote electron transfer between the biochar and PNP, and thus accelerate PNP degradation. This study demonstrates that various properties of the biochar may contribute to PNP degradation.

Trimetallic Nanoparticles: Greener Synthesis and Their Applications

Nanoparticles (NPs) and multifunctional nano-sized materials have significant applications in diverse fields, namely catalysis, sensors, optics, solar energy conversion, cancer therapy/diagnosis, and bioimaging. Trimetallic NPs have found unique catalytic, active food packaging, biomedical, antimicrobial, and sensing applications; they preserve an ever-superior level of catalytic activities and selectivity compared to monometallic and bimetallic nanomaterials. Due to these important applications, a variety of preparation routes, including hydrothermal, microemulsion, selective catalytic reduction, co-precipitation, and microwave-assisted methodologies have been reported for the syntheses of these nanomaterials. As the fabrication of nanomaterials using physicochemical methods often have hazardous and toxic impacts on the environment, there is a vital need to design innovative and well-organized eco-friendly, sustainable, and greener synthetic protocols for their assembly, by applying safer, renewable, and inexpensive materials. In this review, noteworthy recent advancements relating to the applications of trimetallic NPs and nanocomposites comprising these NPs are underscored as well as their eco-friendly and sustainable synthetic preparative options.

Biochar derived from red algae for efficient remediation of 4-nonylphenol from marine sediments

4-Nonylphenol (4-NP), a phenolic endocrine disruptor chemical (EDC), is known to have high toxicity to aquatic organisms and humans. The remediation of 4-NP-contaminated marine sediments was studied using red algae-based biochar (RAB) thermochemically synthesized from Agardhiella subulata with simple pyrolysis process under different temperatures of 300-900 °C in CO₂ atmosphere. The RAB was characterized by XRD, Raman, FTIR spectroscopy, and zeta potential measurements. The calcium in RAB efficiently activated sodium percarbonate (SPC) to generate reactive radicals for the catalytic degradation of 4-NP at pH 9.0. The oxygen-containing functional groups reacted with H₂O₂, which increased the generation of reactive radicals under alkaline pH condition. Ca²⁺ ion was the active species responsible for 4-NP degradation. CaO/CaCO₃ on RAB surface enhanced direct electron transfer, increased HO production, and 4-NP degradation in marine sediments. Langmuir‒Hinshelwood type kinetics well described the 4-NP degradation process. Remediation of contaminated sediments using RAB could be a sustainable approach toward closed-loop biomass cycling in the degradation of 4-NP contaminants.

Fe3O4/graphene aerogels: A stable and efficient persulfate activator for the rapid degradation of malachite green

Encapsulation metal oxides into carbon frameworks is a good strategy to synthesis high activity and stable catalyst. Here, Fe₃O₄ nanoparticles (∼20 nm) were firmly encapsulated in the graphene aerogels by a simple and environmentally friendly method (Fe₃O₄/GAs), for activating persulfate (PS) to degrade malachite green (MG) under simulated sunlight. A strong electron conduction was generated between the Fe₃O₄ nanoparticles and graphene sheets to improve the cycle of Fe(II)/Fe(III), and the MG degradation over a wide pH rage (3-9) was enhanced greatly. The MG molecule was decomposed into 12 intermediates and two possible pathways was proposed. More importantly, toxicity test and Toxicity Estimation Software (T.E.S.T.) proved that the toxicity of MG can be effectively controlled by Fe₃O₄/GAs + PS + light system. In addition to the high catalytic activity, Fe₃O₄/GAs exhibited a good stability and reusability due to the strong interaction between Fe₃O₄ and graphene layers. The degradation efficiency remained above 87% after six cycles, and the leaching amount of iron in each cycle was less than 0.125 wt%. SO₄•^- was the dominate radical for MG degradation and the heterogeneous Fenton-like reaction was mainly performed on the surface of catalyst. This work lay a foundation for applying Fe₃O₄/GAs as a highly efficient, stable and reusable heterogeneous Fenton-like catalyst for future applications.

Simulated photocatalytic aging of biochar in soil ecosystem: Insight into organic carbon release, surface physicochemical properties and cadmium sorption

Photochemical/photocatalytic reaction, one of the aging pathway of biochar in soil, not only changed the physicochemical properties of biochar, but also affected the migration and transformation of pollutants. Wheat straw biochar was photocatalytic aged in a Fenton-like system using organic acid as buffer solution under light sources, the organic carbon release and surface chemical changes of biochar were investigated to illustrate the adsorption behaviors. With Fe(III) or α-Fe₂O₃ added, the total organic carbon (TOC) of aged biochar solution was influenced more by buffer system than light sources, with the highest of 420.59 mg L^-1 in citric acid system. The production of the hydroxyl radical (OH·) at citric/Fe(III) system was higher than the oxalic/Fe(III) system under the Hg lamp and showed an increasing trend with time. With light exposure, the porous structure of the biochar altered and surface area increased from 7.613 to 29.74 m² g^-1. Meanwhile, the adsorption of cadmium ion by biochar aged in citric/Fe(III) system also showed an increased adsorption capacity with a maximum of 73.54 mg g^-1. So, a well understanding of biochar physicochemical properties changes under natural ecosystem was undoubtedly useful for scientific assessment the long-term feasibility of biochar as soil remediation.

Application of biochar and its composites in catalysis

With a wide range of raw materials, low cost and large specific surface area, biochar has been widely used in environmental remediation. However, the biochar has a saturated adsorption capacity when it is used as a pollutant adsorbent. Recent efforts have been made to prepare biochar and biochar-based catalysts with enhanced catalytic properties to expand their potential applications. The environmental persistent free radicals (EPFRs) of biochar could react with O₂ to induce hydroxyl radicals (•OH) without the addition of oxidants. When oxidants were added, biochar and biochar-based catalysts could activate them to generate •OH and sulfate radicals (SO₄•^-), respectively. Moreover, biochar could act as an electron acceptor to improve the photodegradation capacity of catalysts. With reference to the information regarding biochar and biochar-based catalysts, this work provides a critical review on recent research development as follows: 1) the preparations of various types of biochar and biochar-based catalysts are summarized; 2) the effects of the synthetic conditions and transition metals on the catalytic activity of biochar-based catalysts are discussed; (3) methods for characterizing the active sites of the biochar-based catalysts are described; and (4) the environmental applications of biochar and biochar-based catalysts are discussed with regards to three aspects based on the interaction mechanisms, namely, oxidation, reduction, and photocatalysis. The synthesis conditions and loading of metal/metal-free catalyst are key parameters controlling the catalysis activity of biochar and biochar-based catalysts. This review provides new insights into the application of biochar in catalysis. Key challenges and further research directions are proposed as well.