Selective capture of lanthanum and lead cations over biomass-derived ion-imprinted biomacromolecule adsorbents

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Novel phosphate functionalized sodium alginate hydrogel for efficient adsorption and separation of Nd and Dy from Co

The recovery of rare earth elements (REEs) including neodymium (Nd) and dysprosium (Dy) from NdFeB permanent magnets has become one of the main ways to solve the increased demand for rare earth. Herein, n-dodecyl phosphate (DPPA) was used for the first time as the adsorption functional group donor, sodium alginate as the substrate, and calcium chloride solution as the reactive solvent, a hybrid hydrogel adsorbent DPPA/CaALG was synthesized by sol-gel method for application in the adsorption and separation of Nd and Dy from the Co-Nd-Dy ternary system. SEM-EDS, and N2 adsorption-desorption analysis showed the successful preparation of DDPA/CaALG with mesoporous structure. Batch experiments showed the superiority of the hybrid hydrogel for the good selective adsorption of Nd and Dy, such as large adsorption capacity (Nd: 162.5 mg/g, Dy: 183.5 mg/g), and no adsorption for Co. FT-IR, XPS showed that PO and P-O groups are involved in the adsorption process of Nd and Dy as electron acceptors, where the ion exchange of P-OH is dominant. Furthermore, the chemical properties of ligands and complexes were analyzed by Density Functional Theory (DFT) calculations and revealed their adsorption behaviors as well as the competition between different metal ions.

Improved recovery selectivity of rare earth elements from mining wastewater utilizing phytosynthesized iron nanoparticles

While rare earth elements (REEs) play key roles in many modern technologies, the selectivity of recovering of REEs from mining wastewater remains a critical problem. In this study, iron nanoparticles (FeNPs) synthesized from euphorbia cochinchinensis extracts were successfully used for selective recovery of REEs from real mining wastewater with removal efficiencies of 89.4% for Y(III), 79.8% for Ce(III) and only 6.15% for Zn(Ⅱ). FTIR and XPS analysis suggested that the high selective removal efficiency of Y(III) and Ce(III) relative to Zn(Ⅱ) on FeNPs was due to a combination of selective REEs adsorption via complexing with O or N, ion exchange with H+ present in functional groups contained within the capping layer and electrostatic interactions. Adsorptions of Y(III) and Ce(III) on FeNPs conformed to pseudo second-order kinetics and the Langmuir isotherm model with maximum adsorption capacities of 5.10 and 0.695 mg∙g-1, respectively. The desorption efficiencies of Y(III) and Ce(III) were, respectively, 95.0 and 97.9% in 0.05 M acetic acid, where desorption involved competitive ion exchange between Y(III), Ce(III) and Zn(Ⅱ) with H+ contained in acetic acid and intraparticle diffusion. After four consecutive adsorption-desorption cycles, adsorption efficiencies for Y(III) and Ce(III) remained relatively high at 52.7% and 50.1%, respectively, while desorption efficiencies of Y(III) and Ce(III) were > 80.0% and 95.0%, respectively. Overall, excellent reusability suggests that FeNPs can practically serve as a potential high-quality selectivity material for recovering REEs from mining wastewaters.

Preparation of an ion imprinted chitosan-based porous film with an interpenetrating network structure for efficient selective adsorption of Gd(iii)

In this work, a new Gd(III) ion imprinted CS-based porous film with interpenetrating network structure was fabricated by a simple polymerization–evaporation approach for the efficient selective adsorption of Gd(III) from aqueous solution.

Modifying alginate beads using polycarboxyl component for enhanced metal ions removal

Designing desirable adsorbent for highly efficient removal of heavy metal ions is of practical significance, given the cost-effectiveness, environmental benign, natural abundance and easy-handling collection features. Herein, a bead-like adsorbent with high adsorption capacity was prepared by modifying alginate beads using polyacrylate with high density of carboxyl groups. The developed alginate/polyacrylate beads were collaboratively characterized by FT-IR, TGA, SEM, XPS, etc., and various adsorption conditions were tested including the pH of the solution, contact time and the initial concentration. The experimental data were fitted well by the Freundlich isotherm model, and the maximum adsorption capacity was obtained from the Langmuir model was 611.0 mg/g, and adsorption process followed the Pseudo-second-order kinetic model. The adsorption mechanisms conformed to multi-layer adsorption, and mainly dominated by chemical interactions. The bead-like adsorbent exhibited excellent reusability after eight sequential cycles and displayed higher adsorption capacity towards lead ions. This type of adsorbent might possess promising role in treating heavy metals from water by virtue of degradable, cost-effective component and high adsorption efficiency.