Evaluation of Idesia polycarpa Maxim fruits extract as a natural green corrosion inhibitor for copper in 0.5 M sulfuric acid solution

Corrosion inhibition of mild steel by Praecitrullus fistulosus (tinda fruit and peel) extracts

Metal corrosion has recently emerged as a growing concern, impacting both local and industrial operations and disrupting conventional production methods. The utilization of green inhibitors to mitigate the metal degradation has garnered extensive attention from researchers and industrial professionals due to their prominent advantages: high efficiency, cost-effectiveness, and eco-friendliness. A novel ecofriendly inhibitor was prepared from Praecitrullus fistulosus (tinda fruit and peel) for mild steel (MS) corrosion in 1 M HCl. The presence of phenol, 3,5-bis (1,1-dimethyl ethyl)-, 9-octadecenoic acid, methyl ester, hexadecanoic acid 15-methyl-, methyl ester, 9, 12-octadecadienoic acid, methyl ester, 9, 12, 15-octadecatrienoic acid, methyl ester, (Z,Z,Z-), ascorbic acid, and phytol were identified as major constituent through LC/MS analysis of tinda extracts. The existence of these compounds was further confirmed through FTIR analysis, which shows the presence of various functional groups, such as -OH, CO, C-O-C, CC, and aromatic rings in the tinda extracts. Electrochemical and gravimetric analyses were used to investigate the inhibitory effect of tinda extracts. Outcomes of Tafel analysis revealed that both tinda extracts significantly reduced the corrosion current as compared to blank and achieved 83.73 % and 87.59 % inhibition efficiencies at 200 mg L-1 of tinda peel extract (TPE) and tinda fruit extract (TFE), respectively. The change in corrosion potential (Ecorr) was within an ±85 mV range compared to that of the uninhibited system, indicating that both tinda extracts demonstrated a mixed-type inhibition behavior. During adsorption studies, the best fit was obtained for the Langmuir adsorption model. The obtained values of standard Gibbs free energy (ΔG°ads) for TPE and TFE lie between -20 and - 40 kJ mol-1 but close to -20 kJ mol-1, which reveals preferential physical adsorption of the extracts on the metal surface. Thermodynamic parameters, including activation energy, enthalpy, and entropy, were computed across the temperature range of 303 to 323 K, suggesting that corrosion occurs spontaneously by the endothermic process. FESEM analysis depicted that inhibited systems exhibited smooth and crack-free surfaces as compared to blank system. AFM images demonstrated that surface roughness was significantly reduced for the inhibited system. In EDX analysis, the weight percentage of Cl was reduced in the presence of tinda extracts as compared to blank, and in XRD analysis, iron chloride (FeCl2) peak did not appear in the presence of inhibitor but it was in the uninhibited system. All surface-related findings signify that tinda extracts are adsorbed on the MS surface and form a protective layer that separates the metal from the corrosive solution.

Subchronic Toxicity Evaluation of Idesia polycarpa Fruit Oil by 90-Day Oral Exposure in Wistar Rats

Idesia polycarpa, belonging to the Flacourtiaceae family, is a tall deciduous tree, widely distributed in some Asian countries. It is famous for its high yield of fruit known as oil grape, which is rich of linoleic acid and linolenic acid, and so on. To provide evidences for its safe use as food, subchronic toxicity of I. polycarpa fruit oil and no observed adverse effect level were performed in male and female specific pathogen-free Wistar rats. Based on the Organization for Economic Co-operation and Development guidelines, the oil was orally administered to rats by gavage at 0, 1.0, 2.0, and 4.0mL/kg.bw/day for 90 days, followed by a 28-day recovery period. The results showed that no sign of oil-related toxicity, clinically or histologically, was observed in both male and female rats. Although there was a slight increase or decrease in some indicators such as hematology, serum chemistry, and so on, those changes were all within the normal ranges, and as presented in the 90-day study, the oil exhibited no toxic effect compared to the control rats. I. polycarpa might be a potential excellent and healthy vegetable oil resource.

Pumpkin Leaf Extract Crop Waste as a New Degradable and Environmentally Friendly Corrosion Inhibitor

The pumpkin leaf was extracted by the decoction method, and it was used as an eco-friendly, nontoxic inhibitor of copper in 0.5 M H2SO4 corrosion media. To evaluate the composition and protective capacity of the pumpkin leaf extract, Fourier infrared spectroscopy, electrochemical testing, XPS, AFM, and SEM were employed. The results showed that the pumpkin leaf extract (PLE) is an effective cathode corrosion inhibitor, exhibiting exceptional protection for copper within a specific temperature range. The corrosion inhibition efficiency of the PLE against copper reached 89.98% when the concentration of the PLE reached 800 mg/L. Furthermore, when the temperature and soaking time increased, the corrosion protection efficiency of 800 mg/L PLE on copper consistently remained above 85%. Analysis of the morphology also indicated that the PLE possesses equally effective protection for copper at different temperatures. Furthermore, XPS analysis reveals that the PLE molecules are indeed adsorbed to form an adsorption film, which is consistent with Langmuir monolayer adsorption. Molecular dynamics simulations and quantum chemical calculations were conducted on the main components of the PLE.

Copper corrosion prevention in 3.5% NaCl solution by Spartium junceum petals extract as an eco-friendly bio-inhibitor: kinetic and thermodynamic studies

During the last decades, numerous studies were performed to introduce green corrosion inhibitors. So, various materials were utilized due to their being bio-degradable, available, and inexpensive. Because of the aforementioned aspects, Spartium Junceum petals extract (SJPE) was used as a new bio-inhibitor for the prevention of copper corrosion in a 3.5 wt% NaCl solution. This extract was obtained in water as a non-toxic solvent. Also, gas chromatography-mass spectrometry (GC-MS) confirmed the presence of organic molecules containing O, N, and F heteroatoms in SJPE, which are important for inhibitors. Also, Fourier-transform infrared spectroscopy (FT-IR) was used to identify the functional groups of the inhibitor molecules. Moreover, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques were used which verified the great effect of this procedure to promote resistance corrosion of copper substrate. In addition, scanning electron microscopy (SEM) exhibited the surface morphology of copper substrate in the presence of SJPE which demonstrated the improvement of corrosion resistance in comparison to the absence of this bio-inhibitor. It should be noted that by increasing the amount of SJPE, the inhibition efficiency was ameliorated up to 87.8%. Furthermore, variation in temperature magnitude between 298 and 338 K implied that SPJE can improve inhibition behavior in higher temperatures. By applying temperature effect study data, the value of activation energy in the presence of the inhibitor was calculated (37.9 kJ mol-1), and the adsorption isotherm was Langmuir. Also, these data showed the inhibition mechanism is physical adsorption. The proposed inhibitor can be used as an efficient, eco-friendly, and inexpensive bio-inhibitor for the prevention of copper corrosion.

An investigation of the growth status of 19-year-old Idesia polycarpa 'Yuji' plantation forest in the mountainous region of Henan, China

Plantation forests play an important role in the mitigation of greenhouse gas emissions. Idesia polycarpa Maxim is an emerging woody oil tree species in most Asian countries. The 19-year-old Idesia polycarpa 'Yuji' plantation forest was selected as a sample site. The nutrient contents of the understory soil total carbon (TC), total nitrogen (TN), nitrate nitrogen (NN), organic carbon (OC), available phosphorus (AP), available potassium (AK), and pH were analyzed. Several metrics were measured to quantify the growth status of the forest, such as tree heights (H), clear bole heights (CBH), diameters at breast height (DBH), and male-to-female ratios (MFR). In addition, we harvested the fruits to analyze oil content and fatty acid composition. The results found that the nutrient content of the soil was TC (4.93%), TN (0.42%), NN (43.08 mg kg-1), OC (4.90 g kg-1), AP (13.66 mg kg-1), AK (30.48 mg kg-1), and pH (7.90). The growth characteristics were H (11.75 m), DBH (12.79 cm), and CBH (6.17 m). The MFR was close to 1:1. Besides, the oil content of the fruit and unsaturated fatty acids was 24.08% and 68.49%, respectively. As an alternative tree species, the plantation of Idesia polycarpa offers great potential in artificial afforestation in some particular places with specific forest site conditions.

Insight into the corrosion inhibition of Biebersteinia multifida root extract for carbon steel in acidic medium

In this project, the protective effect of Biebersteinia multifida root extract (BMRE) against corrosion of 1018 low carbon steel (1018LCS) in HCl solutions was appraised by assessing weight loss, electrochemical impedance spectroscopy (EIS), and polarization at 25 °C. The maximum inhibitory efficacy for the concentration of 1 g/l of the BMRE was 92.8% at 25 °C after 2 h and increased to 95.3% after 24 h of immersion. Polarization experiments have shown that the extract in acidic solutions can act as a mixed corrosion inhibitor. The corrosion inhibitory efficacy of BMRE decreased with increasing temperature, and at all temperature settings studied, the adsorption of BMRE molecules on 1018 LCS was consistent with the Langmuir adsorption isotherm. The Scanning Electron Microscopy (SEM) analysis confirmed the protection of 1018 LCS in the acidic solution containing BMRE extract. Quantum chemistry studies of four main constituents of the extract called vasicinone, umbelliferon, scopoletin, and ferulic acid were performed by density functional theory, DFT, in neutral and protonated states. Calculated quantum parameters were used to investigate the active sites and donor-receptor interactions of molecules.

Performance Evaluation of New Chalcone Oxime Functionalized Graphene Oxide as a Corrosion Inhibitor for Carbon Steel in a Hydrochloric Acid Solution

This study aims to synthesize new chalcone oxime functionalized graphene oxide (CO-GO) and investigate the enhancement in corrosion protection. The morphology and structure of the synthesized CO-GO have been characterized by elemental analysis: Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM). Moreover, the effectiveness of corrosion inhibition was investigated by utilizing electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP). The results of the above analyses demonstrate that CO-GO has an outstanding corrosion inhibitor performance of up to 94% and acts as a mixed-type inhibitor with a primarily anodic action. The effect of temperature on a carbon steel surface indicates that the tested composites are chemisorbed. A few techniques were able to provide surface characterization such as scanning electron microscopy and ultraviolet (UV)-visible spectroscopy to confirm inhibitor adsorption on the carbon steel surface.

Corrosion Inhibition Properties of Thiazolidinedione Derivatives for Copper in 3.5 wt.% NaCl Medium

Copper is the third-most-produced metal globally due to its exceptional mechanical and thermal properties, among others. However, it suffers serious dissolution issues when exposed to corrosive mediums. Herein, two thiazolidinedione derivatives, namely, (Z)-5-(4-methylbenzylidene)thiazolidine-2,4-dione (MTZD) and (Z)-3-allyl-5-(4-methylbenzylidene)thiazolidine-2,4-dione (ATZD), were synthesized and applied for corrosion protection of copper in 3.5 wt.% NaCl medium. The corrosion inhibition performance of tested compounds was evaluated at different experimental conditions using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization curves (PPC) and atomic force microscopy (AFM). EIS results revealed that the addition of studied inhibitors limited the dissolution of copper in NaCl solution, leading to a high polarization resistance compared with the blank solution. In addition, PPC suggested that tested compounds had a mixed-type effect, decreasing anodic and cathodic corrosion reactions. Moreover, surface characterization by AFM indicated a significant decrease in surface roughness of copper after the addition of inhibitors. Outcomes from the present study suggest that ATZD (IE% = 96%) outperforms MTZD (IE% = 90%) slightly, due to the presence of additional –C3H5 unit (–CH2–CH = CH2) in the molecular scaffold of MTZD.

A Review on Plants and Biomass Wastes as Organic Green Corrosion Inhibitors for Mild Steel in Acidic Environment

Acid corrosion is a problem pertaining to corrosion that involves an acid solution. It is important to treat metal to preserve its integrity. Thus, acids are utilized to clean and treat metal surfaces. In return, this may lead to over-etching and metal degradation. Corrosion inhibitors were introduced as a solution for the issue. However, there are some problems associated with the usage of conventional corrosion inhibitors. Traces of nitrites and chromates that are present in the inhibitors may lead to serious health and environmental issues. As a solution, organic green corrosion inhibitors have been studied to replace the conventional corrosion inhibitors. These inhibitor molecules form a protective layer on top of the metal surface to suppress metal dissolution when added to the acid solution. This process prevents direct contact between the metal surfaces and the acid environment. This study explores the usage of natural resources and biomass wastes as the basis for organic green corrosion inhibitors. This study also provides some suggestions for new biomass wastes that can be studied as new organic corrosion inhibitors, and it is aimed at opening the perspective of researchers on exploring new organic inhibitors by using natural resources and biomass wastes.

A review of plant metabolites with metal interaction capacity: a green approach for industrial applications

Rapid industrial development is responsible for severe problems related to environmental pollution. Many human and industrial activities require different metals and, as a result, great amounts of metals/heavy metals are discharged into the water and soil making them dangerous for both human and ecosystems and this is being aggravated by intensive demand and utilization. In addition, compounds with metal binding capacities are needed to be used for several purposes including in activities related to the removal and/or recovery of metals from effluents and soils, as metals' corrosion inhibitors, in the synthesis of metallic nanoparticles and as metal related pharmaceuticals, preferably a with minimum risks associated to the environment. Plants are able to synthesize an uncountable number of compounds with numerous functions, including compounds with metal binding capabilities. In fact, some of the plants' secondary metabolites can bind to various metals through different mechanisms, as such they are excellent sources of such compounds due to their high availability and vast diversity. In addition, the use of plant-based compounds is desirable from an environmental and economical point of view, thus being potential candidates for utilization in different industrial activities, replacing conventional physiochemical methods. This review focuses on the ability of some classes of compounds that can be found in relatively high concentrations in plants, having good metal binding capacities and thus with potential utilization in metal based industrial activities and that can be involved in the progressive development of new environmentally friendly strategies.