1
|
Hao T, Xu K, Zheng X, Yao X, Li J, Yu Y, Liu Z. Hydrogen inhibition of wet AlLi alloy dust collector systems using a composite green biopolymer inhibitor based on chitosan/sodium alginate: Experimental and theoretical studies. Int J Biol Macromol 2024; 278:134708. [PMID: 39151867 DOI: 10.1016/j.ijbiomac.2024.134708] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2024] [Revised: 07/31/2024] [Accepted: 08/11/2024] [Indexed: 08/19/2024]
Abstract
Aluminum‑lithium (AlLi) alloy polishing and grinding processes in wet dust collector systems could cause hydrogen fire and explosion. From the fundamental perspective of preventing hydrogen explosions, a safe, nontoxic, and sustainable modified green hydrogen inhibitor based on chitosan (CS) and sodium alginate (SA) was developed in this study and was used as a hydrogen evolution inhibitor for the processing of waste dust from AlLi alloys. The structure and elemental distribution of the synthesized material were characterized through characterization experiments. Hydrogen evolution experiments and a hydrolysis kinetic model were used to explore the inhibitory effect of modified CS/SA on AlLi alloy dust, and the results revealed that the inhibitory concentration of the hydrogen explosion lower limit was 0.40 wt%, with an inhibition efficiency of 91.93 %, indicating an 11.88-61.44 % improvement over that of CS and SA. As the inhibitor concentration increased and the temperature decreased, the hydrogen inhibition effect increased. Characterization experiments and density functional theory showed that CS/SA primarily formed a dense physical protective barrier on the dust surface through chemical adsorption and complexation reactions, interrupting the hydrogen evolution reaction between the metal and water. This study introduces a novel green modified hydrogen inhibitor that fundamentally addresses hydrogen generation and explosion.
Collapse
Affiliation(s)
- Tengteng Hao
- School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
| | - Kaili Xu
- School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China.
| | - Xin Zheng
- School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
| | - Xiwen Yao
- School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
| | - Jishuo Li
- School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
| | - Yanwu Yu
- School of Chemical Engineering and Environment, North University of China, Taiyuan 030051, China
| | - Zhenhua Liu
- School of Architecture and Environmental Engineering, Ningxia Institute of Science and Technology, Shizuishan 753000, China
| |
Collapse
|
2
|
Li Q, Wang F, Zhang Y, Shi M, Zhang Y, Yu H, Liu S, Li J, Tan SC, Chen W. Biopolymers for Hygroscopic Material Development. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2209479. [PMID: 36652538 DOI: 10.1002/adma.202209479] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/14/2022] [Revised: 01/13/2023] [Indexed: 06/17/2023]
Abstract
The effective management of atmospheric water will create huge value for mankind. Diversified and sustainable biopolymers that are derived from organisms provide rich building blocks for various hygroscopic materials. Here, a comprehensive review of recent advances in developing biopolymers for hygroscopic materials is provided. It is begun with a brief introduction of species diversity and the processes of obtaining various biopolymer materials from organisms. The fabrication of hygroscopic materials is then illustrated, with a specific focus on the use of biopolymer-derived materials as substrates to produce composites and the use of biopolymers as building blocks to fabricate composite gels. Next, the representative applications of biopolymer-derived hygroscopic materials for dehumidification, atmospheric water harvesting, and power generation are systematically presented. An outlook on future challenges and key issues worthy of attention are finally provided.
Collapse
Affiliation(s)
- Qing Li
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| | - Fei Wang
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| | - Yaoxin Zhang
- Department of Materials Science and Engineering, National University of Singapore, 9 Engineering drive 1, Singapore, 117574, Singapore
| | - Mengjiao Shi
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| | - Yingying Zhang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| | - Haipeng Yu
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| | - Shouxin Liu
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| | - Jian Li
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| | - Swee Ching Tan
- Department of Materials Science and Engineering, National University of Singapore, 9 Engineering drive 1, Singapore, 117574, Singapore
| | - Wenshuai Chen
- Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin, 150040, P. R. China
| |
Collapse
|
3
|
Nawaz M, Shakoor RA, Al-Qahtani N, Bhadra J, Al-Thani NJ, Kahraman R. Polyolefin-Based Smart Self-Healing Composite Coatings Modified with Calcium Carbonate and Sodium Alginate. Polymers (Basel) 2024; 16:636. [PMID: 38475319 DOI: 10.3390/polym16050636] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 09/23/2023] [Accepted: 10/02/2023] [Indexed: 03/14/2024] Open
Abstract
Corrosion-related damage incurs significant capital costs in many industries. In this study, an anti-corrosive pigment was synthesized by modifying calcium carbonate with sodium alginate (SA), and smart self-healing coatings were synthesized by reinforcing the anti-corrosive pigments into a polyolefin matrix. Structural changes during the synthesis of the anti-corrosive pigment were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Moreover, thermal gravimetric analysis confirmed the loading of the corrosion inhibitor, and electrochemical impedance spectroscopic analysis revealed a stable impedance value, confirming the improved corrosion resistance of the modified polyolefin coatings. The incorporation of the anticorrosive pigment into a polyolefin matrix resulted in improved pore resistance properties and capacitive behavior, indicating a good barrier property of the modified coatings. The formation of a protective film on the steel substrate reflected the adsorption of the corrosion inhibitor (SA) on the steel substrate, which further contributed to enhancing the corrosion resistance of the modified coatings. Moreover, the formation of the protective film was also analyzed by profilometry and elemental mapping analysis.
Collapse
Affiliation(s)
- Muddasir Nawaz
- Center for Advanced Materials (CAM), Qatar University, Doha 2713, Qatar
| | - Rana Abdul Shakoor
- Center for Advanced Materials (CAM), Qatar University, Doha 2713, Qatar
- Department of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar
| | - Noora Al-Qahtani
- Center for Advanced Materials (CAM), Qatar University, Doha 2713, Qatar
- Centeral Laboratories Unit, Qatar University, Doha 2713, Qatar
| | - Jolly Bhadra
- Qatar University Young Scientist Center, Qatar University, Doha 2713, Qatar
| | | | - Ramazan Kahraman
- Department of Chemical Engineering, Qatar University, Doha 2713, Qatar
| |
Collapse
|
4
|
Christina K, Subbiah K, Arulraj P, Krishnan SK, Sathishkumar P. A sustainable and eco-friendly approach for environmental and energy management using biopolymers chitosan, lignin and cellulose - A review. Int J Biol Macromol 2024; 257:128550. [PMID: 38056737 DOI: 10.1016/j.ijbiomac.2023.128550] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2023] [Revised: 11/15/2023] [Accepted: 11/30/2023] [Indexed: 12/08/2023]
Abstract
Biopolymers are a naturally occurring alternative to synthetic polymers that are linked by covalent bonds, which includes cellular components such as proteins, nucleotides, lipids, and polysaccharides. Based on the extensive literature review it was found that chitosan, lignin, and cellulose were predominantly used in the energy and environmental sectors. Due to their vast array of qualities, including the adsorption, flocculation, anticoagulation, and furthermore, have made them useful for treating wastewater and pollutant removal. Chitosan and lignin have been used as a proton exchange membrane in the energy storage device of fuel cells. As these biopolymers develop strong coordination connections with metal surfaces, they act as an anticorrosive agent, which inhibiting the corrosion. Besides, there are a lot of recent developments in the application of biopolymers for energy and environmental fields. The present review provides a concise summary of recent developments in membrane-based biopolymers role in energy and environmental field. In addition, this review is drawn to a conclusion with a discussion of future trends in the real application of biopolymers in a variety of different industries, as well as the financial significance of these future trends.
Collapse
Affiliation(s)
- Karen Christina
- Division of Biotechnology, School of Agriculture and Biosciences, Karunya Institute of Technology and Sciences, Coimbatore 641114, India
| | - Kavitha Subbiah
- Division of Biotechnology, School of Agriculture and Biosciences, Karunya Institute of Technology and Sciences, Coimbatore 641114, India.
| | - Prince Arulraj
- Division of Civil Engineering, School of Engineering and Technology, Karunya Institute of Technology and Sciences, Coimbatore 641114, India
| | - Suresh Kumar Krishnan
- Division of Biotechnology, School of Agriculture and Biosciences, Karunya Institute of Technology and Sciences, Coimbatore 641114, India
| | - Palanivel Sathishkumar
- Green Lab, Department of Prosthodontics, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai 600077, India.
| |
Collapse
|
5
|
Timothy UJ, Umoren PS, Solomon MM, Igwe IO, Umoren SA. An appraisal of the utilization of natural gums as corrosion inhibitors: Prospects, challenges, and future perspectives. Int J Biol Macromol 2023; 253:126904. [PMID: 37714237 DOI: 10.1016/j.ijbiomac.2023.126904] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2023] [Revised: 08/15/2023] [Accepted: 09/12/2023] [Indexed: 09/17/2023]
Abstract
Natural gums are macro compounds containing monosaccharide (sugar) units bonded by glycosidic to form long polymeric sugar chains of considerably high molecular weight. Natural gums are multifaceted in applications with the main areas being the food and pharmaceutical industries. The recent research interest in corrosion inhibitors is considering natural gums because of their abundance and ecological compatibility. Hence, this review takes a look at the use of natural gums in pure and modified forms in metals protection. The review establishes that the corrosion-protecting ability of natural gums has a direct connotation with their macromolecular weights, chemical composition, and molecular and electronic structures. Immersion duration and temperature are other factors found to affect the inhibition performance of natural gums considerably. The inhibition of natural gums in pure form is found not to be excellent due to their high hydration rate, algal and microbial contamination, solubility that depends on pH, and thermal instability. Common modification techniques adopted by corrosion inhibitor scientists are copolymerization, mixing with chemicals to induce synergism, crosslinking, and insertion of inorganic nanomaterials into the polymer matrix. Infusion of biosynthesized nanoparticles approach towards enhancing the corrosion inhibition efficiency of natural gums is recommended for future studies because of the unique characteristics of nanoparticles.
Collapse
Affiliation(s)
- Ukeme J Timothy
- Department of Polymer and Textile Engineering, Federal University of Technology, Owerri, Nigeria
| | - Peace S Umoren
- Department of Bioengineering, Cyprus International University, via Mersin 10, Nicosia 98258, Turkey
| | - Moses M Solomon
- Department of Chemical and Environmental Engineering, University of Nottingham Ningbo China, Ningbo, China.
| | - Isaac O Igwe
- Department of Polymer and Textile Engineering, Federal University of Technology, Owerri, Nigeria
| | - Saviour A Umoren
- Interdisciplinary Research Center for Advanced Materials, King Fahd University of Petroleum & Minerals, Dhahran 62131, Saudi Arabia.
| |
Collapse
|
6
|
Verma C, Goni LKMO, Yaagoob IY, Vashisht H, Mazumder MAJ, Alfantazi A. Polymeric surfactants as ideal substitutes for sustainable corrosion protection: A perspective on colloidal and interface properties. Adv Colloid Interface Sci 2023; 318:102966. [PMID: 37536175 DOI: 10.1016/j.cis.2023.102966] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/08/2023] [Revised: 07/14/2023] [Accepted: 07/18/2023] [Indexed: 08/05/2023]
Abstract
Surfactants are well known for their colloidal and corrosion inhibition potential (CIP) due to their strong propensity to interact with metallic surfaces. However, because of their small molecular size and the fact that they are only effective at relatively high concentrations, their application in aqueous phase corrosion inhibition is often restricted. Polymeric surfactants, a unique class of corrosion inhibitors, hold the potential to eradicate the challenges associated with using surfactants in corrosion inhibition. They strongly bond with the metallic surface and offer superior CIP because of their macromolecular polymeric structure and abundance of polar functional groups. In contrast to conventional polymeric corrosion inhibitors, the inclusion of polar functional groups also aids in their solubilization in the majority of popular industry-based electrolytes. Some of the major functional groups present in polymeric surfactants used in corrosion mitigation include O (ether), glycidyl (cyclic ether), -CONH2 (amide), -COOR (ester), -SO3H (sulfonic acid), -COOH (carboxyl), -NH2 (amino), - + NR3/- + NHR2/- + NH2R/- + NH3 (quaternary ammonium), -OH (hydroxyl), -CH2OH (hydroxymethyl), etc. The current viewpoint offers state-of-the-art information on polymer surfactants as newly developing ideal alternatives for conventional corrosion inhibitors. The industrial scale-up, colloidal, coordination, adsorption properties, and structural requirements of polymer surfactants have also been established based on the knowledge obtained from the literature. Finally, the challenges, drawbacks, and potential benefits of using polymer surfactants have also been discussed.
Collapse
Affiliation(s)
- Chandrabhan Verma
- Department of Chemical Engineering, Khalifa University of Science and Technology, P.O. Box 127788, Abu Dhabi, Saudi Arabia.
| | - Lipiar K M O Goni
- Chemistry Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
| | - Ibrahim Y Yaagoob
- Chemistry Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
| | - Hemlata Vashisht
- Department of Chemistry, Kirori Mal College, University of Delhi, Delhi 110007, India
| | - Mohammad A J Mazumder
- Chemistry Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia; Interdisciplinary Research Center for Advanced Materials, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
| | - Akram Alfantazi
- Department of Chemical Engineering, Khalifa University of Science and Technology, P.O. Box 127788, Abu Dhabi, Saudi Arabia
| |
Collapse
|
7
|
Essential Oil of Origanum vulgare as a Green Corrosion Inhibitor for Carbon Steel in Acidic Medium. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING 2023. [DOI: 10.1007/s13369-023-07693-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/11/2023]
Abstract
AbstractIn this study, Oregano (Origanum vulgare) leaf essential oil was studied as an environmental-friendly anticorrosion agent for carbon steel in aggressive hydrochloric acid. The corrosion inhibition of O. vulgare was characterized by surface morphology, electrochemical, weight loss, theoretical and computational methods. It was found that the highest inhibition performance of O. vulgare was 85.64% at 2 g/l in 1 M HCl. The results of Langmuir isotherm and adsorption thermodynamics investigation demonstrated that the O. vulgare inhibitor adsorbed on the metal surface by the formation of rigid covalent bonds. The adsorption and inhibition centers of the selected inhibitor were studied by the computational methods, resulting in that the hydroxyl functional groups and benzoyl rings are mainly responsible for the high inhibition efficiency.
Collapse
|
8
|
Ganjoo R, Sharma S, Verma C, Quraishi MA, Kumar A. Heteropolysaccharides in sustainable corrosion inhibition: 4E (Energy, Economy, Ecology, and Effectivity) dimensions. Int J Biol Macromol 2023; 235:123571. [PMID: 36750168 DOI: 10.1016/j.ijbiomac.2023.123571] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2022] [Revised: 01/24/2023] [Accepted: 02/03/2023] [Indexed: 02/07/2023]
Abstract
Carbohydrate polymers (polysaccharides) and their derivatives are widely utilized in sustainable corrosion inhibition (SCI) because of their various fascinating properties including multiple adsorption sites, high solubility and high efficiency. Contrary to traditional synthetic polymer-based corrosion inhibitors, polysaccharides are related to the 4E dimension, which stands for Energy, Economy, Ecology, and Effectivity. Furthermore, they are relatively more environmentally benign, biodegradable, and non-bioaccumulative. The current review describes the SCI features of various heteropolysaccharides, including gum Arabic (GA), glycosaminoglycans (chondroitin-4-sulfate (CS), hyaluronic acid (HA), heparin, etc.), pectin, alginates, and agar for the first time. They demonstrate impressive anticorrosive activity for different metals and alloys in a variety of corrosive electrolytes. Through their adsorption at the metal/electrolyte interface, heteropolysaccharides function by producing a corrosion-protective film. In general, their adsorption follows the Langmuir isotherm model. In their molecular structures, heteropolysaccharides contain several polar functional groups like -OH, -NH2, -COCH3, -CH2OH, cyclic and bridging O, -CH2SO3H, -SO3OH, -COOH, -NHCOCH3, -OHOR, etc. that serve as adsorption centers when they bind to metallic surfaces.
Collapse
Affiliation(s)
- Richika Ganjoo
- Department of Chemistry, School of Chemical Engineering and Physical Sciences, Lovely Professional University, Punjab, India
| | - Shveta Sharma
- Department of Chemistry, School of Chemical Engineering and Physical Sciences, Lovely Professional University, Punjab, India
| | - Chandrabhan Verma
- Center of Research Excellence in Corrosion, Research Institute, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia.
| | - M A Quraishi
- Center of Research Excellence in Corrosion, Research Institute, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
| | - Ashish Kumar
- Department of Chemistry, School of Chemical Engineering and Physical Sciences, Lovely Professional University, Punjab, India; NCE, Department of Science and Technology, Government of Bihar, India.
| |
Collapse
|
9
|
Biopolymer sodium alginate based titania and magnetite nanocomposites as natural corrosion inhibitors for mild steel in acidic medium. J IND ENG CHEM 2023. [DOI: 10.1016/j.jiec.2023.02.031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/11/2023]
|
10
|
Boron nitride nanosheets dispersed biopolymer solution as an effective copper corrosion inhibitor in acidic medium. Polym Bull (Berl) 2023. [DOI: 10.1007/s00289-023-04673-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
|
11
|
Exploring of an ecological corrosion inhibitor of wood hibiscus leaf extract for the Cu/H2SO4 system based on experimental study and theoretical calculations. J Taiwan Inst Chem Eng 2023. [DOI: 10.1016/j.jtice.2023.104686] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023]
|
12
|
El-Asri A, Rguiti MM, Jmiai A, Oukhrib R, Bourzi H, Lin Y, Issami SE. Carissa macrocarpa extract (ECM) as a new efficient and ecologically friendly corrosion inhibitor for copper in nitric acid: Experimental and theoretical approach. J Taiwan Inst Chem Eng 2023. [DOI: 10.1016/j.jtice.2022.104633] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
13
|
Zeng J, Tan B, Zhang S, Li W. The behavior of two indazole derivatives on the copper/sulfuric acid interface in terms of adsorption and corrosion inhibition. J Taiwan Inst Chem Eng 2022. [DOI: 10.1016/j.jtice.2022.104567] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/31/2022]
|
14
|
Nazari A, Ramezanzadeh B, Guo L, Dehghani A. Application of green active bio-molecules from the aquatic extract of Mint leaves for steel corrosion control in hydrochloric acid (1 M) solution; Surface, electrochemical thermodynamic, and theoretical explorations. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130540] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
15
|
Mitigation Effect Of Novel Bipyrazole Ligand And Its Copper Complex On The Corrosion Behavior Of Steel In Hcl: Combined Experimental And Computational Studies. Chem Phys Lett 2022. [DOI: 10.1016/j.cplett.2022.139532] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
16
|
Hou Y, Zhu L, He K, Yang Z, Ma S, Lei J. Synthesis of three imidazole derivatives and corrosion inhibition performance for copper. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2021.118432] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
17
|
Comparison of green bio-based cerium/alginate vs. copper/alginate beads: a study of vibrational and thermal properties using experimental and theoretical methods. J Mol Model 2022; 28:37. [PMID: 35034209 DOI: 10.1007/s00894-022-05028-8] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2021] [Accepted: 01/05/2022] [Indexed: 10/19/2022]
Abstract
Herein, bio-based alginates (Alg) containing metallic beads (Ce and Cu) were synthesized via an alginate cross-linking method, and their properties were studied using experimental techniques combined with theoretical simulations. Materials were characterized through Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscope (SEM) images, to determine the cross-linking structural features, thermal stability, and surface morphology of alginates. Besides, density functional theory (DFT) methods were employed to calculate global reactivity parameters such as HOMO-LUMO gap energies (ΔEH-L), electronegativity (χ), hardness (η), and electrophilic and nucleophilic indicators, using both gas and aqueous media for the study of the complexation process. Among other features, characterization of the thermal properties showed that Alg@Ce and Alg@Cu alginate beads behave differently as a function of the temperature. This behavior was also predicted by the conformation energy differences between Alg@Ce and Alg@Cu, which were found out theoretically and explained with the combined study of the vibrational modes between the carboxylate group with either Ce or Cu. Overall, the reactivity of the Alg@Ce alginate bead was higher than that of the Alg@Cu counterpart, results could be used as a cornerstone to employed the materials here studied in a wide range of applications.
Collapse
|
18
|
Kumawat TK, Kumawat V, Sharma S, Sharma V, Pandit A, Kandwani N, Biyani M. Sustainable Green Methods for the Extraction of Biopolymers. Biopolymers 2022. [DOI: 10.1007/978-3-030-98392-5_5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
19
|
Sedik A, Athmani S, Saoudi A, Ferkous H, Ribouh N, Lerari D, Bachari K, Djellali S, Berredjem M, Solmaz R, Alam M, Jeon BH, Benguerba Y. Experimental and theoretical insights into copper corrosion inhibition by protonated amino-acids. RSC Adv 2022; 12:23718-23735. [PMID: 36090441 PMCID: PMC9396437 DOI: 10.1039/d2ra03535a] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2022] [Accepted: 07/18/2022] [Indexed: 12/02/2022] Open
Abstract
The effects of cysteine (Cys) and l-methionine (l-Met) on copper corrosion inhibition were examined in 1 M HNO3 solution for short and long exposure times. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) were used. The EIS determined the potential for zero charges of copper (PZC) in the inhibitor solution. SEM and AFM have been used to study material surfaces. Energy-dispersive X-ray spectroscopy (EDS) was used to identify surface elemental composition. DFT and molecular dynamics simulations explored the interaction between protonated amino acids and aggressive media anions on a copper (111) surface. The effects of cysteine (Cys) and l-methionine (l-Met) on copper corrosion inhibition were examined in 1 M HNO3 solution for short and long exposure times.![]()
Collapse
Affiliation(s)
- Amel Sedik
- Scientific and Technical Research Center in Physico-chemical Analysis, BP 384, Bou-Ismail Industrial Zone, RP 42004, Tipaza, Algeria
- Nanomaterials, Corrosion and Surface Treatment Laboratory (LNMCT), Badji Mokhtar University, BP 12, 23000 Annaba, Algeria
| | - Samah Athmani
- Scientific and Technical Research Center in Physico-chemical Analysis, BP 384, Bou-Ismail Industrial Zone, RP 42004, Tipaza, Algeria
| | - Adel Saoudi
- Scientific and Technical Research Center in Physico-chemical Analysis, BP 384, Bou-Ismail Industrial Zone, RP 42004, Tipaza, Algeria
- Metallurgy and Materials Engineering Laboratory (LMGM), BADJI Mokhtar – Annaba University, PO 12, CP 23000, Algeria
| | - Hana Ferkous
- Laboratoire de Génie Mécanique et Matériaux, Faculté de Technologie, Université de Skikda, 21000, Skikda, Algeria
| | - Nazih Ribouh
- Nanomaterials, Corrosion and Surface Treatment Laboratory (LNMCT), Badji Mokhtar University, BP 12, 23000 Annaba, Algeria
| | - Djahida Lerari
- Scientific and Technical Research Center in Physico-chemical Analysis, BP 384, Bou-Ismail Industrial Zone, RP 42004, Tipaza, Algeria
| | - Khaldoun Bachari
- Scientific and Technical Research Center in Physico-chemical Analysis, BP 384, Bou-Ismail Industrial Zone, RP 42004, Tipaza, Algeria
| | - Souad Djellali
- Laboratoire de Physico-Chimie des Hauts Polymères (LPCHP), Faculty of Technology, University Ferhat Abbas Setif 1, 19000, Setif, Algeria
| | - Malika Berredjem
- Laboratory of Applied Organic Chemistry LCOA, Synthesis of Biomolecules and Molecular Modelling Group, Badji-Mokhtar – Annaba University, Box 12, 23000 Annaba, Algeria
| | - Ramazan Solmaz
- Bingöl University, Health Sciences Faculty, Occupational Health and Safety Department, 12000, Bingöl, Türkiye
| | - Manawwer Alam
- Department of Chemistry, College of Science, King Saud University, PO Box 2455, Riyadh, 11451, Saudi Arabia
| | - Byong-Hun Jeon
- Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul 04763, Republic of Korea
| | - Yacine Benguerba
- Laboratoire de Biopharmacie Et Pharmacotechnie (LPBT), Ferhat Abbas Setif 1 University, Setif, Algeria
| |
Collapse
|
20
|
Zhu L, Fan J, Huang H, Guo L, Zhu M, Zheng X, Obot IB. Inhibitive effect of different solvent fractions of bamboo shoots extract on the corrosion of mild steel in 0.5 mol/L H2SO4 solution. J Mol Struct 2021. [DOI: 10.1016/j.molstruc.2021.130852] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
21
|
Ebenso EE, Verma C, Olasunkanmi LO, Akpan ED, Verma DK, Lgaz H, Guo L, Kaya S, Quraishi MA. Molecular modelling of compounds used for corrosion inhibition studies: a review. Phys Chem Chem Phys 2021; 23:19987-20027. [PMID: 34254097 DOI: 10.1039/d1cp00244a] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Abstract
Molecular modelling of organic compounds using computational software has emerged as a powerful approach for theoretical determination of the corrosion inhibition potential of organic compounds. Some of the common techniques involved in the theoretical studies of corrosion inhibition potential and mechanisms include density functional theory (DFT), molecular dynamics (MD) and Monte Carlo (MC) simulations, and artificial neural network (ANN) and quantitative structure-activity relationship (QSAR) modeling. Using computational modelling, the chemical reactivity and corrosion inhibition activities of organic compounds can be explained. The modelling can be regarded as a time-saving and eco-friendly approach for screening organic compounds for corrosion inhibition potential before their wet laboratory synthesis would be carried out. Another advantage of computational modelling is that molecular sites responsible for interactions with metallic surfaces (active sites or adsorption sites) and the orientation of organic compounds can be easily predicted. Using different theoretical descriptors/parameters, the inhibition effectiveness and nature of the metal-inhibitor interactions can also be predicted. The present review article is a collection of major advancements in the field of computational modelling for the design and testing of the corrosion inhibition effectiveness of organic corrosion inhibitors.
Collapse
Affiliation(s)
- Eno E Ebenso
- Institute for Nanotechnology and Water Sustainability, College of Science, Engineering and Technology, University of South Africa, Johannesburg, South Africa.
| | - Chandrabhan Verma
- Interdisciplinary Research Center for Advanced Materials, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| | - Lukman O Olasunkanmi
- Department of Chemistry, Faculty of Science, Obafemi Awolowo University, Ile-Ife 220005, Nigeria
| | - Ekemini D Akpan
- Material Science Innovation and Modelling Research Focus Area, Faculty of Natural and Agricultural Sciences, North-West University (Mafikeng Campus) Private Bag X2046, Mmabatho 2735, South Africa
| | - Dakeshwar Kumar Verma
- Department of Chemistry, Govt. Digvijay Autonomous Postgraduate College, Rajnandgaon, Chhattisgarh 491441, India
| | - Hassane Lgaz
- Department of Crop Science, College of Sanghur Life Science, Konkuk University, Seoul 05029, South Korea
| | - Lei Guo
- School of Materials and Chemical Engineering, Tongren University, Tongren, 554300, China
| | - Savas Kaya
- Faculty of Science, Department of Chemistry, Cumhuriyet University, 58140, Sivas, Turkey
| | - M A Quraishi
- Interdisciplinary Research Center for Advanced Materials, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
| |
Collapse
|
22
|
Cui M, Yu Y, Zheng Y. Effective Corrosion Inhibition of Carbon Steel in Hydrochloric Acid by Dopamine-Produced Carbon Dots. Polymers (Basel) 2021; 13:1923. [PMID: 34200520 PMCID: PMC8226475 DOI: 10.3390/polym13121923] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2021] [Revised: 05/28/2021] [Accepted: 05/31/2021] [Indexed: 12/04/2022] Open
Abstract
In present study, novel nitrogen doped carbon dots (NCDs) are synthesized using a green material-dopamine-as a precursor and studied as corrosion inhibitors for Q235 carbon steel in 1 M HCl solution. According to the electrochemical results, it is found that NCDs acting as a mixed-type corrosion inhibitor can effectively retard the acid corrosion of carbon steel, and their inhibition efficiency increases with the concentration increasing from 50 to 400 ppm. The highest inhibition efficiency is 96.1% in the presence of 400 ppm NCDs at room temperature. Additionally, the adsorption of NCDs obeys the Langmuir adsorption isotherm. In addition, weight loss results show that the inhibition efficiency in the presence of 400 ppm NCDs increases with prolonged exposure time and rising temperature (298-328 K), owing to the strong adsorption of NCDs on the steel surface, and the η value is 92.2% at 60 h of immersion and 86.2%, 89.1%, 90.6% and 92.9% at 298, 308, 318 and 328 K, respectively. Surface analysis by scanning electron microscope (SEM), laser scanning confocal microscope (LSCM) and X-ray photoelectron spectroscopy (XPS) further proves the formation of a protective NCD film on the steel surface.
Collapse
Affiliation(s)
- Mingjun Cui
- Key Laboratory of Impact and Safety Engineering, Ministry of Education, School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China;
| | - Yue Yu
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China;
| | - Yuxuan Zheng
- Key Laboratory of Impact and Safety Engineering, Ministry of Education, School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China;
| |
Collapse
|
23
|
Taia A, Ibrahimi BE, Benhiba F, Ashfaq M, Tahir MN, Essaber M, Aatif A, Hökelek T, Mague JT, Sebbar NK, Essassi EM. Syntheses, single crystal X-ray structure, Hirshfeld surface analyses, DFT computations and Monte Carlo simulations of New Eugenol derivatives bearing 1,2,3-triazole moiety. J Mol Struct 2021. [DOI: 10.1016/j.molstruc.2021.130189] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
24
|
Hayani S, Thiruvalluvar AA, Baba YF, Rodi YK, Muthunatesan S, Chahdi FO, Mague JT, Ibrahimi BE, Anouar EH, Sebbar NK, Essassi EM. Synthesis, structure elucidation, Hirshfeld surface analysis, DFT, molecular docking and Monte Carlo simulation of new quinoline-4-carboxylate derivatives. J Mol Struct 2021. [DOI: 10.1016/j.molstruc.2021.130195] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
25
|
Zhang W, Nie B, Li HJ, Li Q, Li C, Wu YC. Inhibition of mild steel corrosion in 1 M HCl by chondroitin sulfate and its synergistic effect with sodium alginate. Carbohydr Polym 2021; 260:117842. [PMID: 33712176 DOI: 10.1016/j.carbpol.2021.117842] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2020] [Revised: 02/16/2021] [Accepted: 02/17/2021] [Indexed: 01/13/2023]
Abstract
The development of effective and environment-friendly corrosion inhibitors is of great significance for the protection of mild steel in hydrochloric acid media. Accordingly, a natural polysaccharide mixture inhibitor composed of chondroitin sulfate derived from pig cartilage (CS-PC) and sodium alginate (SA) is developed here, and the synergistic effect of the two polysaccharides towards adsorption on mild steel in 1 M HCl is studied. The inhibition performance has been studied using weight loss test, electrochemical investigations, SEM, SECM and UV methods. The results indicate that the mixtures of CS-PC and SA strongly inhibit the corrosion of mild steel compared to individual inhibitors (i.e., 95.18 % versus 72.78 %), and show a synergistic inhibition effect. The structure-activity relationship between the molecular structure of the CS-PC + SA mixture and its corrosion inhibition performance has been discussed by using the quantum chemistry calculation and molecular dynamics simulations. It is believed that these results have certain guiding significance for the rational design of efficient corrosion inhibitor.
Collapse
Affiliation(s)
- Weiwei Zhang
- Weihai Marine Organism & Medical Technology Research Institute, Harbin Institute of Technology, Weihai, 264209, PR China
| | - Boli Nie
- Weihai Marine Organism & Medical Technology Research Institute, Harbin Institute of Technology, Weihai, 264209, PR China
| | - Hui-Jing Li
- Weihai Marine Organism & Medical Technology Research Institute, Harbin Institute of Technology, Weihai, 264209, PR China; Weihai Chuanghui Environmental Protection Technology Co., Ltd., Weihai, 264200, PR China.
| | - Qinying Li
- Weihai Marine Organism & Medical Technology Research Institute, Harbin Institute of Technology, Weihai, 264209, PR China.
| | - Chaoyi Li
- Weihai Marine Organism & Medical Technology Research Institute, Harbin Institute of Technology, Weihai, 264209, PR China
| | - Yan-Chao Wu
- Weihai Marine Organism & Medical Technology Research Institute, Harbin Institute of Technology, Weihai, 264209, PR China; Weihai Chuanghui Environmental Protection Technology Co., Ltd., Weihai, 264200, PR China.
| |
Collapse
|
26
|
Synthesis and evaluation of nonionic surfactants based on dimethylaminoethylamine: Electrochemical investigation and theoretical modeling as inhibitors during electropolishing in-ortho-phosphoric acid. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2021.115421] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
|
27
|
Modification Approaches to Enhance Dehydration Properties of Sodium Alginate-Based Pervaporation Membranes. MEMBRANES 2021; 11:membranes11040255. [PMID: 33916137 PMCID: PMC8066153 DOI: 10.3390/membranes11040255] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/02/2021] [Revised: 03/27/2021] [Accepted: 03/29/2021] [Indexed: 11/21/2022]
Abstract
Transport characteristics of sodium alginate (SA) membranes cross-linked with CaCl2 and modified with fullerenol and fullerene derivative with L-arginine for pervaporation dehydration were improved applying various approaches, including the selection of a porous substrate for the creation of a thin selective SA-based layer, and the deposition of nano-sized polyelectrolyte (PEL) layers through the use of a layer-by-layer (Lbl) method. The impacts of commercial porous substrates made of polyacrylonitrile (PAN), regenerated cellulose, and aromatic polysulfone amide were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), standard porosimetry method, and water filtration. The effects of PEL combinations (such as poly(sodium 4-styrene sulfonate) (PSS)/SA, PSS/chitosan, PSS/polyacrylic acid, PSS/poly(allylamine hydrochloride)) and the number of PEL bilayers deposited with the Lbl technique on the properties of the SA and SA/fullerene derivative membranes were studied by SEM, AFM, and contact angle measurements. The best characteristics were exhibited by a cross-linked PAN-supported SA/fullerenol (5%) membrane with five PSS/SA bilayers: permeation flux of 0.68–1.38 kg/(m2h), 0.18–1.55 kg/(m2h), and 0.50–1.15 kg/(m2h), and over 99.7, 99.0, and 89.0 wt.% water in the permeate for the pervaporation dehydration of isopropanol (12–70 wt.% water), ethanol (4–70 wt.% water), and tetrahydrofuran (5.7–70 wt.% water), respectively. It was demonstrated that the mutual application of bulk and surface modifications essentially improved the membrane’s characteristics in pervaporation dehydration.
Collapse
|
28
|
Bio-active corrosion inhibitor based on 8-hydroxyquinoline-grafted-Alginate: Experimental and computational approaches. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2020.114615] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
29
|
Corrosion Inhibition of 3003 Aluminum Alloy in Molar Hydrochloric Acid Solution by Olive Oil Mill Liquid By-Product. INTERNATIONAL JOURNAL OF CORROSION 2021. [DOI: 10.1155/2021/6662395] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022] Open
Abstract
According to the literature, the works on the inhibition of aluminum alloy corrosion using naturally occurring compounds are limited. For this, the inhibiting effect of oil mill liquid by-product (OMW) on the corrosion of 3003 aluminum alloy (AA3003) in molar hydrochloric acid solution was evaluated using electrochemical techniques. In parallel, a computational approach based on DFT/B3LYP and Monte Carlo methods was used to understand the inhibition process under electronic and atomic scales, respectively. The experimental results reveal that OMW has a good inhibiting effect on the corrosion of AA3003 alloy in the tested solution and acts as a cathodic inhibitor. The inhibitory efficiency increases by increasing OMW concentration to attain 89% at 6.0 ppm. The effect of temperature shows that the inhibition efficiency of OMW decreases with temperature rising. Nevertheless, a good prevention capacity of 83% is obtained at 338 K. Such interesting achieved protection property was attributed to the adsorption of OMW constituents onto the alloy surface via a mixed physichemisorption process. This process is found to obey the Langmuir adsorption isotherm. Furthermore, the activation thermodynamic parameters of the corrosion process of AA3003 alloy were also determined and discussed. The computational outcomes outlined the ability of the OMW components to interact favorably with the metal surface, hence the formation of a protective layer, which justified the observed inhibition behaviors. Conferring to the present study, OMW can be used as a good green corrosion inhibitor for AA3003 alloy in the acidic medium.
Collapse
|
30
|
Jmiai A, Tara A, El Issami S, Hilali M, Jbara O, Bazzi L. A new trend in corrosion protection of copper in acidic medium by using Jujube shell extract as an effective green and environmentally safe corrosion inhibitor: Experimental, quantum chemistry approach and Monte Carlo simulation study. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2020.114509] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
|
31
|
Synthesis of a novel metal-organic nanocomposite film (MONF) with superior corrosion protection performance based on the biomimetic polydopamine (PDA)-based molecules and Sm2O3 particles on the steel surface. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.114143] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
32
|
Ibrahim MM, Mersal GA, Fallatah AM, Saracoglu M, Kandemirli F, Alharthi S, Szunerits S, Boukherroub R, Ryl J, Amin MA. Electrochemical, theoretical and surface physicochemical studies of the alkaline copper corrosion inhibition by newly synthesized molecular complexes of benzenediamine and tetraamine with π acceptor. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.114386] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
33
|
|
34
|
El Ghayati L, Sert Y, Sebbar NK, Ramli Y, Ahabchane NH, Talbaoui A, Mague JT, El Ibrahimi B, Taha ML, Essassi EM, Al‐Zaqri N, Alsalme A. Syntheses of novel 1,
5‐benzodiazepine
derivatives: Crystal structures, spectroscopic characterizations, Hirshfeld surface analyses, molecular docking studies,
DFT
calculations, corrosion inhibition anticipation, and antibacterial activities. J Heterocycl Chem 2020. [DOI: 10.1002/jhet.4167] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Lhoussaine El Ghayati
- Laboratory of Heterocyclic Organic Chemistry, Medicines Science Research Center, Pharmacochemistry Competence Center, Faculté des Sciences Mohammed V University in Rabat Rabat Morocco
| | - Yusuf Sert
- Department of Physics Bozok University Yozgat Turkey
| | - Nada Kheira Sebbar
- Laboratory of Heterocyclic Organic Chemistry, Medicines Science Research Center, Pharmacochemistry Competence Center, Faculté des Sciences Mohammed V University in Rabat Rabat Morocco
- Laboratory of Chemistry and Environment, Applied Bioorganic Chemistry Team, Faculty of Sciences Ibn Zohr University Agadir Morocco
| | - Youssef Ramli
- Laboratory of Medicinal Chemistry, Drug Sciences Research Center, Faculty of Medicine and Pharmacy Mohammed V University Rabat Morocco
| | - Noureddine Hamou Ahabchane
- Laboratory of Heterocyclic Organic Chemistry, Medicines Science Research Center, Pharmacochemistry Competence Center, Faculté des Sciences Mohammed V University in Rabat Rabat Morocco
| | - Ahmed Talbaoui
- Laboratoire de Biologie des Pathologies Humaines, Faculté des Sciences Université Mohammed V Rabat Morocco
| | - Joel T. Mague
- Department of Chemistry Tulane University New Orleans Louisiana USA
| | - Brahim El Ibrahimi
- Applied Chemistry‐Physic Team, Faculty of Sciences University of Ibn Zohr Agadir Morocco
| | - Mohamed Labd Taha
- Laboratory of Chemistry and Environment, Applied Bioorganic Chemistry Team, Faculty of Sciences Ibn Zohr University Agadir Morocco
| | - El Mokhtar Essassi
- Laboratory of Heterocyclic Organic Chemistry, Medicines Science Research Center, Pharmacochemistry Competence Center, Faculté des Sciences Mohammed V University in Rabat Rabat Morocco
| | - Nabil Al‐Zaqri
- Department of Chemistry, College of Science King Saud University Riyadh Saudi Arabia
| | - Ali Alsalme
- Department of Chemistry, College of Science King Saud University Riyadh Saudi Arabia
| |
Collapse
|
35
|
Shaban SM, Elsamad SA, Tawfik SM, Abdel-Rahman AAH, Aiad I. Studying surface and thermodynamic behavior of a new multi-hydroxyl Gemini cationic surfactant and investigating their performance as corrosion inhibitor and biocide. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113881] [Citation(s) in RCA: 36] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
|
36
|
Inhibition of copper corrosion by the essential oil of Allium sativum in 0.5M H2SO4 solutions. SN APPLIED SCIENCES 2020. [DOI: 10.1007/s42452-020-03393-8] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023] Open
|
37
|
Badr EA, Hefni HH, Shafek S, Shaban SM. Synthesis of anionic chitosan surfactant and application in silver nanoparticles preparation and corrosion inhibition of steel. Int J Biol Macromol 2020; 157:187-201. [DOI: 10.1016/j.ijbiomac.2020.04.184] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2019] [Revised: 04/21/2020] [Accepted: 04/22/2020] [Indexed: 10/24/2022]
|
38
|
Oukhrib R, El Ibrahimi B, Abou Oualid H, Abdellaoui Y, El Issami S, Bazzi L, Hilali M, Bourzi H. In silico investigations of alginate biopolymer on the Fe (110), Cu (111), Al (111) and Sn (001) surfaces in acidic media: Quantum chemical and molecular mechanic calculations. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113479] [Citation(s) in RCA: 38] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
39
|
Cao J, Guo C, Guo X, Chen Z. Inhibition behavior of synthesized ZIF-8 derivative for copper in sodium chloride solution. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113277] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
|
40
|
Dehghani A, Mostafatabar AH, Bahlakeh G, Ramezanzadeh B, Ramezanzadeh M. Detailed-level computer modeling explorations complemented with comprehensive experimental studies of Quercetin as a highly effective inhibitor for acid-induced steel corrosion. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113035] [Citation(s) in RCA: 47] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
41
|
majd MT, Ramezanzadeh M, Bahlakeh G, Ramezanzadeh B. Probing molecular adsorption/interactions and anti-corrosion performance of poppy extract in acidic environments. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.112750] [Citation(s) in RCA: 46] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
42
|
Pais M, Rao P. Maltodextrin for corrosion mitigation of zinc in sulfamic acid: Electrochemical, surface and spectroscopic studies. Int J Biol Macromol 2020; 145:575-585. [PMID: 31887385 DOI: 10.1016/j.ijbiomac.2019.12.197] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2019] [Revised: 12/15/2019] [Accepted: 12/22/2019] [Indexed: 11/28/2022]
Abstract
Maltodextrin (MLD), a biopolymer was introduced as a novel green inhibitor to mitigate the corrosion of zinc in sulfamic acid medium by weight loss and by electrochemical methods. Conditions were optimized to obtain maximum inhibition efficiency. Thermodynamic parameters were evaluated. The surface morphology was studied by SEM, EDX, AFM analysis. Adsorption of inhibitor was re-affirmed by FT-IR spectroscopy, Atomic absorption spectroscopy (AAS), Raman spectroscopy and powder X-ray diffraction (XRD) analysis. Maximum efficiency of 72% was observed for the addition of 400 ppm of MLD. Surface morphology and spectroscopic studies confirmed the adsorption of MLD onto the surface of zinc. Results obtained by classical and electrochemical methods are in good agreement with one another. Maltodextrin emerged as an effective eco -friendly green inhibitor.
Collapse
Affiliation(s)
- Mikitha Pais
- Department of Chemistry, Manipal Institute of Technology, MAHE, Manipal 576104, Karnataka, India
| | - Padmalatha Rao
- Department of Chemistry, Manipal Institute of Technology, MAHE, Manipal 576104, Karnataka, India.
| |
Collapse
|
43
|
Potentiodynamic Polarization Performance of a Novel Composite Coating System of Al2O3/Chitosan-Sodium Alginate, Applied on an Aluminum AA6063 Alloy for Protection in a Chloride Ions Environment. COATINGS 2020. [DOI: 10.3390/coatings10010045] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/14/2023]
Abstract
In this research work, a preliminary potentiodynamic polarization performance testing was carried out on a new environmentally friendly proposed composite coating. The proposed composite coating was developed by: (a) hot sulfuric anodizing to produce an Al2O3 conversion film followed by an (b) organic electrodeposited chitosan–sodium alginate blended film. Posteriorly, the conversion and organic films were microstructurally characterized by scanning electron microscopy. Finally, the polarization resistance technique was used to measure the corrosion resistance of the uncoated and coated AA6063 alloy in a simulated marine environment and the polarization tests were compared to samples immersed during 30 days in same electrolyte solution. The obtained inhibition corrosion efficiency of the proposed coating system was measured comparing the Rp of the uncoated alloy to the coated samples, showing an efficiency about 99% for a 3% NaCl electrolyte for some of the samples. Therefore, the experimental results obtained during this research demonstrates the feasibility of using the developed anticorrosive composite coating to protect aluminum alloys against chloride corrosive ions species and to further continue with the corresponding research.
Collapse
|
44
|
A study of vitamin B influence on the morphology, roughness, and reflectance of electropolished aluminum in H3PO4–H2SO4 mixture. ARAB J CHEM 2020. [DOI: 10.1016/j.arabjc.2018.06.011] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
|
45
|
Keramatinia M, Ramezanzadeh B, Mahdavian M. Green production of bioactive components from herbal origins through one-pot oxidation/polymerization reactions and application as a corrosion inhibitor for mild steel in HCl solution. J Taiwan Inst Chem Eng 2019. [DOI: 10.1016/j.jtice.2019.10.005] [Citation(s) in RCA: 52] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
46
|
Novel cost-effective and high-performance green inhibitor based on aqueous Peganum harmala seed extract for mild steel corrosion in HCl solution: Detailed experimental and electronic/atomic level computational explorations. J Mol Liq 2019. [DOI: 10.1016/j.molliq.2019.03.086] [Citation(s) in RCA: 130] [Impact Index Per Article: 26.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
47
|
|
48
|
Li F, Bai M, Wei S, Jin S, Shen W. Multidimension Insight Involving Experimental and in Silico Investigation into the Corrosion Inhibition of N,N-Dibenzyl Dithiocarbamate Acid on Copper in Sulfuric Acid Solution. Ind Eng Chem Res 2019. [DOI: 10.1021/acs.iecr.9b00371] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Fuhua Li
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Mengna Bai
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
- Department of Chemistry, University of California, Davis, One Shields Avenue, Davis, California 95616, United States
| | - Shun’an Wei
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Saimeng Jin
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| | - Weifeng Shen
- School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China
| |
Collapse
|
49
|
Raghavendra N. Expired Lorazepam Drug: A Medicinal Compound as Green Corrosion Inhibitor for Mild Steel in Hydrochloric Acid System. CHEMISTRY AFRICA 2019. [DOI: 10.1007/s42250-019-00061-2] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
50
|
Shaban SM, Aiad I, Moustafa AH, Aljoboury OH. Some alginates polymeric cationic surfactants; surface study and their evaluation as biocide and corrosion inhibitors. J Mol Liq 2019. [DOI: 10.1016/j.molliq.2018.10.017] [Citation(s) in RCA: 59] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|