Theoretical and experimental study of choline chloride-carboxylic acid deep eutectic solvents and their hydrogen bonds

Durable fluorinated cobalt oxyhydroxide/calcium alginate hydrogels for activating peroxymonosulfate to enable nearly 100% degradation of ciprofloxacin

Peroxymonosulfate (PMS) activation by solid catalysts for ciprofloxacin (CIP) removal is a promising method for decontaminating wastewater. However, mainstream catalysts suffer from efficiency and durability issues due to mechanical fragility and structural instability. Here, we have developed a durable calcium alginate hydrogel encapsulating fluorinated cobalt oxyhydroxide (FCO/CAH), fabricated by a simple hydrogen-bond-assisted cross-linking reaction, to enhance PMS activation for complete CIP removal. The optimized 2-FCO/CAH could generate abundant singlet oxygen (1O2) and sulfate radicals (SO4˙-) with PMS, resulting in 0.433 min-1 kinetic constant and approximately 100% CIP degradation within 10 minutes. This exceptional degradation efficiency is due to the even distribution of 2-FCO, which maximizes catalytic sites for PMS activation, and the multichannel cavity structure of CAH, which effectively enriches both PMS and CIP. Furthermore, the durability of 2-FCO/CAH was proved by its negligible decay in CIP removal efficiency (∼100%) and good microstructure retention after 6 consecutive cycles, facilitated by a stable surface reconstructed interphase on the 2-FCO surface and the strong mechanical property of 2-FCO/CAH. Our work showcases a facile approach to constructing durable hydrogel catalysts that improve PMS-mediated antibiotic degradation.

A green extraction technology of lignocellulose from cassava residue by mechanical activation-assisted ternary deep eutectic solvent

Lignocellulose (LC) is a natural polymer material that holds immense potential for various applications. However, extracting LC from biomass wastes with high-starch content has been challenging due to low selectivity and yield. In this study, LC was prepared from cassava residue (CR) via a combination of mechanical activation pretreatment and a citric acid (CA)-enhanced ternary deep eutectic solvent (TDES) consisting of choline chloride (ChCl), lactic acid (LA), and CA. The mechanical activation reduces the size of CR, greatly promoting the removal ability for starch, lignin and hemicellulose using TDES, and thus improving yield and selectivity of LC through this method. The CA esterified LC to prevent its excessive hydrolysis and increased a significantly higher LC content (82.52 wt%) compared to mechanical activation only and DES without CA, increasing by 6.97 times and 1.26 times, respectively. The extraction temperature significantly affected the structure, composition, thermal stability of LC and the properties of recovered TDES. The LC extracted at 90 °C (LC-90) had the highest cellulose content (82.52 wt%), crystallinity index (44.82 %), and higher degradation temperature (339.7 °C). The properties of the recovered TDES and extraction mechanism were analyzed. This study provides a strategy for the high-value utilization of biomass waste.

Plant-Based Shape Memory Cryogel for Hemorrhage Control

The escalating global demand for sustainable manufacturing, motivated by concerns over energy conservation and carbon footprints, encounters challenges due to insufficient renewable materials and arduous fabrication procedures to fulfill specific requirements in medical and healthcare systems. Here, biosafe pollen cryogel is engineered as effective hemostats without additional harmful crosslinkers to treat deep noncompressible wounds. A straightforward and low-energy approach is involved in forming stable macroporous cryogel, benefiting from the unique micro-hierarchical structures and chemical components of non-allergenic plant pollen. It is demonstrated that the pollen cryogel exhibits rapid water/blood-triggered shape-memory properties within 2 s. Owing to their inherent nano/micro hierarchical structure and abundant chemical functional groups on the pollen surface, the pollen cryogel shows effective hemostatic performance in a mouse liver penetration model, which is easily removed after usage. Overall, the self-crosslinking pollen cryogel in this work pioneers a framework of potential clinical applications for the first-hand treatment on deep noncompressible wounds.

Stabilization of Non-Native Folds and Programmable Protein Gelation in Compositionally Designed Deep Eutectic Solvents

Proteins are adjustable units from which biomaterials with designed properties can be developed. However, non-native folded states with controlled topologies are hardly accessible in aqueous environments, limiting their prospects as building blocks. Here, we demonstrate the ability of a series of anhydrous deep eutectic solvents (DESs) to precisely control the conformational landscape of proteins. We reveal that systematic variations in the chemical composition of binary and ternary DESs dictate the stabilization of a wide range of conformations, that is, compact globular folds, intermediate folding states, or unfolded chains, as well as controlling their collective behavior. Besides, different conformational states can be visited by simply adjusting the composition of ternary DESs, allowing for the refolding of unfolded states and vice versa. Notably, we show that these intermediates can trigger the formation of supramolecular gels, also known as eutectogels, where their mechanical properties correlate to the folding state of the protein. Given the inherent vulnerability of proteins outside the native fold in aqueous environments, our findings highlight DESs as tailorable solvents capable of stabilizing various non-native conformations on demand through solvent design.

Determination of trace heavy metal elements in litterfall by inductively coupled plasma optical emission spectrometry after extraction using choline chloride-based deep eutectic solvents

The development of a green, safe, and accurate sample preparation method for the determination of trace metal elements in environmental samples is of great importance. Choline chloride-based deep eutectic solvents (DESs) were used to extract heavy metal elements from litterfall and the target analytes were measured using inductively coupled plasma optical emission spectrometry. Factors such as the type, ratio, dosage, and extraction time and temperature of the DESs were studied. A DES system based on choline chloride and maleic acid had the highest extraction efficiency of 98.5%, 88.4%, 90.2%, and 93.7% for Cd, Cu, Zn, and Fe. Under the optimized conditions, the limits of detection and limits of quantification were in the range of 0.04-0.70 and 0.13-2.30 mg kg-1. The repeatability (n = 3), estimated in terms of the relative standard deviation, ranged from 1.14% to 3.40%. The proposed method was validated for accuracy using GBW10087. Notably, the energy consumption of the newly developed method was only one-fifth that of a traditional acid digestion method. This work not only presents an environmentally friendly method for the determination of trace element concentrations in environmental samples but also deepens our understanding of DES systems.

Selective Extraction of Critical Metals from Spent Li-Ion Battery Cathode: Cation-Anion Coordination and Anti-Solvent Crystallization

Owing to continuing global use of lithium-ion batteries (LIBs), in particular in electric vehicles (EVs), there is a need for sustainable recycling of spent LIBs. Deep eutectic solvents (DESs) are reported as "green solvents" for low-cost and sustainable recycling. However, the lack of understanding of the coordination mechanisms between DESs and transition metals (Ni, Mn and Co) and Li makes selective separation of transition metals with similar physicochemical properties practically difficult. Here, it is found that the transition metals and Li have a different stable coordination structure with the different anions in DES during leaching. Further, based on the different solubility of these coordination structures in anti-solvent (acetone), a leaching and separation process system is designed, which enables high selective recovery of transition metals and Li from spent cathode LiNi1/3Co1/3Mn1/3O2 (NCM111), with recovery of acetone. Recovery of spent LiCoO2 (LCO) cathode is also evidenced and a significant selective recovery for Co and Li is established, together with recovery and reuse of acetone and DES. It is concluded that the tuning of cation-anion coordination structure and anti-solvent crystallization are practical for selective recovery of critical metal resources in the spent LIBs recycling.

Greenhouse gases capture applying impregnated silica with ionic liquids, deep eutectic solvents, and natural deep eutectic solvents

The development of technologies to capture greenhouse gases (GHGs) like carbon dioxide (CO2) and nitrous oxide (N2O) is vital for climate change mitigation. Ionic liquids (ILs), deep eutectic solvents (DES), and natural deep eutectic solvents (NADES) are promising absorbents to abate GHGs emissions. However, their high viscosity limits the gas-liquid contact, as consequence of the mass transfer. To overcome this, their impregnation onto porous silica gel has been carried out, increasing the gas-liquid contact area. The present study analyzes the effect of size particle of silica gel impregnated with ILs, DES, and NADES over the CO2 and N2O capture at atmospheric conditions. The degree of impregnation of silica particles was determined by thermogravimetric analysis (TGA). The identification of functional groups present on the surface of silica, ILs, DES, and NADES was performed using Fourier-transform infrared spectroscopy (FTIR), and their crystalline structure was determined by X-ray diffraction (XRD). The partition coefficient of CO2 and N2O between gas and ILs, DES, and NADES was determined by a static headspace method. Results show that the degree of solvent impregnation on silica gel ranged from 36.8 to 43.0% w/w, the partition coefficient of CO2 in the impregnated silica varied from 0.005 to 0.067, and for N2O, from 0.005 to 0.032. This suggests that impregnated particles have a greater affinity for N2O compared to CO2. Using impregnated particles requires only 40% of the bulk solvent to achieve a similar GHG capture capacity compared to using bulk solvents.

Green Deep Eutectic Solvents (DESs) for Sustainable Metal Recovery from Thermally Treated PCBs: A Greener Alternative to Conventional Methods

Waste PCBs the core of e-waste is rich in copper, tin, zinc, iron, and nickel. Leaching base metals from PCB used to be done in toxic, corrosive acidic/alkali mediums. In this work, an environmentally friendly method for leaching metals from thermally treated PCBs (TPCBs) of mobile phones was proposed using choline chloride based deep eutectic solvents (DES). DES selectivity and solubility of metals from metal oxides were the main screening criteria. FA-ChCl had the maximum solubility of Cu, Fe, and Ni, while Urea-ChCl had high Zn selectivity and solubility. Oxalic acid has high selectivity for Sn. FA-ChCl extracted Cu and Fe best at 16 h, 100 °C, and 1/30 g/mL. Urea-ChCl extracted Zn (90.4±2.9 %) from TPCBs at 100 °C, 21 h, 1/20 g/mL, and 400 rpm. Oxalic acid (1 M) removed 92.3±2.1 % Sn from TPCBs in 1 h at 80 °C and 1/20 g/mL. The shrinking core model-based kinetic investigation of FA-ChCl for Cu extraction showed a diffusion-controlled process. The proposed method is greener than mineral acids utilized for metal extraction.

Green extraction of polysaccharides from Camellia oleifera fruit shell using tailor-made deep eutectic solvents

Camellia oleifera fruit shells are often discarded as byproducts in the C. oleifera industry. There is a general interest in isolating high-value natural products to valorize those fruit shells with green, rapid, and effective extraction methods. This study employed 43 combinations of deep eutectic solvents (DESs) to extract polysaccharides from C. oleifera fruit shells. Two choline chloride-based DESs and a ternary DES with propionic acid and 1,3-butanediol as hydrogen bond donors exhibited relatively high extraction efficiency. The polysaccharide yield reached 15.03 ± 0.35 % under optimized extraction time (55 min), extraction temperature (70 °C), and DES water content (33.33 %). The physicochemical composition and preliminary structure of obtained polysaccharides were characterized. Additionally, DESs-extracted polysaccharides exhibited higher in vitro antioxidant activities and hypoglycemic effects compared to water-extracted polysaccharides. These findings suggested that the optimized DES-assisted extraction method could be a potential approach for polysaccharides extraction from C. oleifera.

Bulk nanostructure of a deep eutectic solvent with an amphiphilic hydrogen bond donor

Neutron diffraction with empirical potential structure refinement (EPSR) show the deep eutectic solvent (DES) 1 : 4 choline chloride : butyric acid is amphiphilically nanostructured. Nanostructure results from solvophobic interactions between the alkyl chains of the butyric acid hydrogen bond donor (HBD) and is retained with addition of 10 wt% water. EPSR fits to the diffraction data is used to produce a three-dimensional model of the liquid which is interrogated to reveal the interactions leading to the solvophobic effect, and therefore nanostructure, in this DES at atomic resolution. The model shows electrostatic and hydrogen bond interactions cause the cation, anion and HBD acid group to cluster into a polar domain, from which the acid alkyl chains are solvophobically excluded into theapolar domain. The polar and apolar domains percolate through the liquid in a bicontinuous sponge-like structure. The effect of adding 10 wt% water is probed, revealing that water molecules are sequestered around the cation and anion within the polar domain, while the neat bulk structure is retained. Alkyl chain packing in the apolar domain becomes slightly better-defined indicating water marginally strengthens solvophobic segregation. These findings reveal bulk self-assembled nanostructure can be produced in DESs via an amphiphilic HBD.

Synthesis of biofuel precursors from benzaldehyde and cyclopentanone via aldehyde-ketone condensation in a deep eutectic solvent system

Production of biofuel precursors from biomass-derived platform compounds (BDPC) has a profound influence on biofuel industries. Herein, an efficient catalytic system composed of the deep eutectic solvent (DES, i.e., ChCl/Fa) and SnCl4 (ChCl/Fa-SnCl4) was developed to produce biofuel precursors (C12 and C19) through aldehyde-ketone (A-K) condensation of benzaldehyde (BD) and cyclopentanone (CPO). ChCl/Fa-SnCl4 exhibited the prospective catalytic performance and given the high selectivity (SC12 = 49.20%, SC19 = 15.20%) and total yield (YC12+C19 = 64.37%) of C12 and C19, as well as 99.96% BD conversion under the optimized conditions (BD : CPO molar ratio of 1 : 6, ChCl : Fa molar ratio of 1 : 12, 4 mmol SnCl4, 80 °C for 120 min). Subsequently, the C12 and C19 precursors were successfully applied to generate cyclic alkanes (C12H14 and C19H18) by hydrodeoxygenation with selectivity of 37.61% and 24.10%, respectively. Finally, the potential catalytic mechanism was explored by density functional theory (DFT) calculations. The results unveiled that the formation of a stable structure for the ChCl/Fa-SnCl4 system was ascribed to the viable interactions among ChCl, Fa and SnCl4 by coordination bonds, electrostatic interactions and H-bonds, which decreased reaction energy barriers and drove the condensation of BD and CPO. In this case, the catalytic reactions between BD and CPO were enhanced to promote the synthesis of C12 and C19. This work provides a novel strategy for the applicability of different BDPC to synthesize fuel precursors for the development of liquid biofuels.

Sustainable Collagen Blends with Different Ionic Liquids for Resistive Touch Sensing Applications

Considering the sustainable development goals to reduce environmental impact, sustainable sensors based on natural polymers are a priority as the large im plementation of these materials is required considering the Internet of Things (IoT) paradigm. In this context, the present work reports on sustainable blends based on collagen and different ionic liquids (ILs), including ([Ch][DHP], [Ch][TSI], [Ch][Seri]) and ([Emim][TFSI]), processed with varying contents and types of ILs in order to tailor the electrical response. Varying IL types and contents leads to different interactions with the collagen polymer matrix and, therefore, to varying mechanical, thermal, and electrical properties. Collagen/[Ch][Seri] samples display the most pronounced decrease of the tensile strength (3.2 ± 0.4 MPa) and an increase of the elongation at break (50.6 ± 1.5%). The best ionic conductivity value of 0.023 mS cm^-1 has been obtained for the sample with 40 wt % of the IL [Ch][Seri]. The functional response of the collagen-IL films has been demonstrated on a resistive touch sensor whose response depends on the ionic conductivity, being suitable for the next generation of sustainable touch sensing devices.

NaDES as a green technological approach for the solubility improvement of BCS class II APIs: An insight into the molecular interactions

Recently, Natural Deep Eutectic Solvents (NaDES) have emerged as potential solvents for boosting drug bioavailability. In this work, the mechanism of solubility enhancement of some APIs belonging to BCS class II (tolbutamide, nimesulide, domperidone and cinnarizine) in these eutectic bio-solvents was investigated in order to get deeper insights into the molecular interactions between the NaDES components and the selected drugs. Different NaDES formulations based on choline chloride, proline, solid organic acids (citric, tartaric and malic acid), sugars (glucose and xylitol) and water were prepared by mild heating (70 °C). Characterization of unloaded NaDES (pH, Karl Fisher titration, viscosity and FTIR analysis) indicated that the type of Hydrogen Bond Acceptor (HBA) and Hydrogen Bond Donor (HBD), their molar ratio as well as water amount strongly affect the extent of H-bonding interactions. Hard gelatin capsules filled with NaDES maintained their integrity until 6 months, proving that all water molecules participate in H-bond network. APIs' solubility enhancement was significant in all NaDES with respect to buffer solutions (pH 1.2 and 6.8). Analysing NaDES having Choline as HBA, it was found that the solubility of smaller molecules increased using larger HBD, while higher molecular weight APIs can be better inserted into the network formed by smaller HBD. NOE experiments demonstrated the formation of a robust supramolecular structure among the protons of choline, those of organic acid and water. In addition, 1D ROESY spectra revealed for the first time the crucial role of choline (methyl groups) in establishing hydrophobic interactions with the relative aliphatic or aromatic portion of the drugs. These data suggest the complex structure of the API-NaDES supramolecular assembly and underline that drug solubility is dependent on a balance network of H-bonds and hydrophobic interactions as well. Understanding the type of interactions between the API and NaDES is essential for their use as effective solubilisation aid.

Highly sensitive square wave voltammetric method for determination of brucine in artificial urine samples based on choline chloride modified glassy carbon electrode

This paper demonstrates a highly sensitive Voltammetric sensor for determination of brucine (BRU) in artificial urine sample based on choline chloride modified glassy carbon electrode (ChCl/GCE). The simple and cost effective modification was performed by electrodeposition of choline chloride on glassy carbon electrode surface using cyclic voltammetry technique. The modified electrode surface was characterized by electrochemical, spectroscopic and microscopic imaging. The electrode yields a well-resolved peak current for the irreversible oxidation of brucine in the first scan and a pair of quasi-reversible peaks during the second scan. The CV study indicates that brucine undergoes an adsorption controlled electrochemical process with equal number of electrons and protons transfer on the ChCl/GCE. The SWV result shows that the reduction peak current of BRU at the ChCl/GCE was linear in the range of 0.001 μM-10 μM with limit of detection 8 × 10^-5 μM, limit of quantification 2.6 × 10^-4 μM and sensitivity of 116.4 μA/μM. The ChCl/GCE also showed an excellent selectivity, reproducibility and long-time stability towards the electrochemical reduction of Brucine. Moreover, the practical applicability of the fabricated ChCl/GCE was examined in order to determine BRU in artificial urine samples with recovery ranging from 95.5 to 102.7%. The validity of the developed method was confirmed by chromatographic techniques, high-performance liquid chromatography (HPLC) and the results obtained are consistent the HPLC method.

Elaboration and Characterization of Natural Deep Eutectic Solvents (NADESs): Application in the Extraction of Phenolic Compounds from pitaya

In this paper, natural deep eutectic solvents (NADESs) with lactic acid, glycine, ammonium acetate, sodium acetate, and choline chloride were prepared with and without the addition of water. NADES formation was evaluated using FTIR and Raman, where hydrogen bonds were identified between the hydroxyl group of lactic acid and the amino and carboxyl groups of glycine. Acetate and ammonium ions were also identified as forming bonds with lactic acid. The addition of water did not cause changes in the vibrational modes of the FTIR and Raman spectra but contributed to a reduction in NADES viscosity and density. Viscosity ranged from 0.335 to 0.017 Pa s^-1, and density ranged from 1.159 to 0.785 g mL^-1. The best results for the extraction of phenolic compounds from pitaya (dragon fruit) were achieved with an organic solvent (450. 41 mg 100 g^-1 dry bases-db) in comparison to NADESs lactic acid:glycine (193.18 mg 100 g^-1 db) and lactic acid:ammonium acetate (186.08 mg 100 g^-1 db). The antioxidant activity of the extracts obtained with the NADESs was not statistically different from that of the extract obtained with organic solvents.

Development of electrolytes for rechargeable zinc-air batteries: current progress, challenges, and future outlooks

This review presents the current developments of various electrolyte systems for secondary zinc air batteries (SZABs). The challenges and advancements in aqueous electrolytes (e.g., alkaline, acidic and neutral) and non-aqueous electrolytes (e.g., solid polymer electrolyte, ionic liquids, gel polymer electrolyte, and deep eutectic solvents) development have been reviewed. Moreover, chemical and physical characteristics of electrolytes such as power density, capacity, rate performance, cyclic ability, and safety that play a vital role in recital of the SZABs have been reviewed. Finally, the challenges and limitations that must be investigated and possible future research areas of SZABs electrolytes are discussed.

Enabling Sustainable Chemistry with Ionic Liquids and Deep Eutectic Solvents: A Fad or the Future?

Ionic liquids (ILs) and deep eutectic solvents (DESs) debuted with a promise of a superior sustainability footprint due to their low vapor pressure. However, their toxicity and high cost compromise this footprint, impeding their real-world applications. Fortunately, their property tunability through a rational selection of precursors, including bioderived ones, provides a strategy to ameliorate toxicity, lower cost, and endow new functions. This Review discusses whether ILs and DESs are sustainable solvents and how they contribute to sustainable chemical processes.

Selective Extraction of Transition Metals from Spent LiNix Coy Mn1-x-y O2 Cathode via Regulation of Coordination Environment

The complexity of chemical compounds in lithium-ion batteries (LIBs) results in great difficulties in the extraction of multiple transition metals, which have similar physicochemical characteristics. Here, we propose a novel strategy for selective extraction of nickel, cobalt, and manganese from spent LiNi_x Co_y Mn_1-x-y O₂ (NCM) cathode through the regulation of coordination environment. Depending on adjusting the composition of ligand in transition metal complexes, a tandem leaching and separation system is designed and finally enables nickel, cobalt, and manganese to enrich in the form of NiO, Co₃ O₄ , and Mn₃ O₄ with high recovery yields of 99.1 %, 95.1 %, and 95.3 %, respectively. We further confirm that the combination of different transition metals with well-designed ligands is the key to good selectivity. Through our work, fine-tuning the coordination environment of metal ions is proved to have great prospects in the battery recycling industry.

Comparing deep eutectic solvents and cyclodextrin complexes as curcumin vehicles for blue-light antimicrobial photodynamic therapy approaches

Curcumin (Cur), a polyphenolic compound derived from Curcuma longa L., has garnered the attention of the scientific community due to its remarkable biological properties such as its potential as a photosensitizing agent for photodynamic therapy (PDT). However, due to its low solubility in aqueous media and instability at physiological and alkaline pH, Cur has struggled to find relevant clinical application. To tackle these shortcomings, two distinct Cur-based formulations based on either complexation with methyl-β-cyclodextrin (MβCD), MβCDC-Cur, or dissolution in a choline chloride (ChCl): glycerol (Gly) deep eutectic solvent (DES), DES-Cur, were produced, physio-chemically characterized and compared regarding their potential as phototherapeutic agents for blue-light antimicrobial photodynamic therapy (aPDT) approaches. Both MβCD-Cur and DES-Cur were able to greatly enhance Cur solubility profile when compared to Cur powder. However, MβCD-Cur appears to hinder some of Cur's basal biological properties and possessed greater basal cytotoxicity towards L929 murine fibroblast cell line. Furthermore, MβCD-Cur was less photo-responsive when exposed to light which may hamper its application in blue-light aPDT approaches. In contrast, DES-Cur showed good biological properties and high photoresponsivity, displaying relevant phototoxicity against bacterial pathogens (≥ 99.9% bacterial reduction) while being better tolerated by L929 murine cells. Overall, this study found DES to be the more effective vehicle for Cur in terms of phototherapeutic potential which will serve as basis to develop novel platforms and approaches for blue-light aPDT targeting localized superficial infections.

Computer Simulations of Deep Eutectic Solvents: Challenges, Solutions, and Perspectives

Deep eutectic solvents (DESs) are one of the most rapidly evolving types of solvents, appearing in a broad range of applications, such as nanotechnology, electrochemistry, biomass transformation, pharmaceuticals, membrane technology, biocomposite development, modern 3D-printing, and many others. The range of their applicability continues to expand, which demands the development of new DESs with improved properties. To do so requires an understanding of the fundamental relationship between the structure and properties of DESs. Computer simulation and machine learning techniques provide a fruitful approach as they can predict and reveal physical mechanisms and readily be linked to experiments. This review is devoted to the computational research of DESs and describes technical features of DES simulations and the corresponding perspectives on various DES applications. The aim is to demonstrate the current frontiers of computational research of DESs and discuss future perspectives.

Treatment of oil-based drilling cuttings using the demulsification separation-Fenton oxidation method

In this study, demulsification separation-Fenton oxidation technology was employed as a combined technology to treat total petroleum hydrocarbons (TPH) in oil-based drill cuttings (OBDC). Batch experiments were carried out to optimize the technology parameter. Under the optimal condition, 70% and 51% TPH removal rate was obtained for demulsification technology and Fenton oxidation technology, respectively. Eighty-five percent of TPH removal rate was obtained using combination technology of demulsification separation and Fenton oxidation. Multiple characterizations were used to analyze the physical and chemical properties of treated OBDC. The result of XRD pattern indicated the combination technology had no obvious effect for structure phase of OBDC. The results of FTIR, GC-MS, TG-DTG and SEM were used to characterize the treated OBDC. This paper provides an efficient and feasible combined technology for OBDC treatment, which expands a new strategy for the removal of TPH from solid waste.

Structural investigation and application of Tween 80-choline chloride self-assemblies as osmotic agent for water desalination

Forward osmosis (FO) process has been extensively considered as a potential technology that could minimize the problems of traditional water desalination processes. Finding an appropriate osmotic agent is an important concern in the FO process. For the first time, a nonionic surfactant-based draw solution was introduced using self-assemblies of Tween 80 and choline chloride. The addition of choline chloride to Tween 80 led to micelles formation with an average diameter of 11.03 nm. The ¹H NMR spectra exhibited that all groups of Tween 80 were interacted with choline chloride by hydrogen bond and Van der Waals’ force. The influence of adding choline chloride to Tween 80 and the micellization on its osmotic activity was investigated. Despite the less activity of single components, the average water flux of 14.29 L m^‒2 h^‒1 was obtained using 0.15 M of Tween 80-choline chloride self-assembly as draw solution in the FO process with DI water feed solution. Moreover, various concentrations of NaCl aqueous solutions were examined as feed solution. This report proposed a possible preparation of nonionic surfactant-based draw solutions using choline chloride additive with enhanced osmotic activities that can establish an innovative field of study in water desalination by the FO process.

Processing of Functional Composite Resins Using Deep Eutectic Solvent

Deep eutectic solvents (DESs)—a promising class of alternatives to conventional ionic liquids (ILs) that have freezing points lower than the individual components—are typically formed from two or more components through hydrogen bond interactions. Due to the remarkable advantages of biocompatibility, economical feasibility and environmental hospitality, DESs show great potentials for green production and manufacturing. In terms of the processing of functional composite resins, DESs have been applied for property modifications, recyclability enhancement and functionality endowment. In this review, the applications of DESs in the processing of multiple functional composite resins such as epoxy, phenolic, acrylic, polyester and imprinted resins, are covered. Functional composite resins processed with DESs have attracted much attention of researchers in both academic and industrial communities. The tailored properties of DESs for the design of functional composite resins—as well as the effects of hydrogen bond on the current polymeric systems—are highlighted. In addition to the review of current works, the future perspectives of applying DESs in the processing of functional composite resins are also presented.