Genotoxicity and cytotoxicity of 2-hydroxyethyl methacrylate

Methacrylate Ester Monomers

The Expert Panel for Cosmetic Ingredient Safety reviewed newly available studies since their original assessment in 2005, along with updated information regarding product types and concentrations of use, and confirmed that these 22 methacrylate ester monomers are safe as used in nail enhancement products in the practices of use and concentration as described in this report, when skin contact is avoided.

Investigation of biological effects of HEMA in 3D-organotypic co-culture models of normal and malignant oral keratinocytes

Several in vitro studies utilizing 2-dimensional (2D) cell culture systems have linked 2-hydroxyethyl methacrylate (HEMA) with cytotoxic effects in oral mucosa and dental pulp cells. Although such studies are invaluable in dissecting the cellular and molecular effects of HEMA, there is a growing interest in the utilization of appropriate 3-dimensional (3D) models that mimic the structure of oral mucosa. Using a previously characterized 3D-organotypic co-culture model, this study aimed to investigate the cellular and molecular effects of HEMA on a 3D-co-culture model consisting of primary normal oral keratinocyte (NOK) grown directly on top of collagen I gel containing primary oral fibroblasts (NOF). The second aim was to examine the suitability of a 3D-co-culture system consisting of oral squamous cell carcinoma (OSCC) cells as a model system to investigate the biological effects of HEMA. We demonstrated that HEMA treatment led to reduced viability of NOK, NOF and OSCC-cell lines in 2D-culture. The keratinocytes in 3D-co-cultures of NOK and OSCC-cells reacted similarly with respect to cell proliferation and activation of autophagy flux, to HEMA treatment. Nevertheless, NOK was found to be more susceptible to apoptosis following HEMA treatment than OSCC in 3D-co-cultures. These results indicate that 3D-organotypic co-cultures of NOK might represent an appropriate model system for the investigation of the biological effects of HEMA and other dental biomaterials. Given the challenges in obtaining primary cultures of NOK and issues associated with their rapid differentiation in culture, the possible use of OSCC cells as an alternative to NOK for 3D models represents an area for future research.

Volatile Compound Emissions from Stereolithography Three-Dimensional Printed Cured Resin Models for Biomedical Applications

Stereolithography three-dimensional printing is used increasingly in biomedical applications to create components for use in healthcare and therapy. The exposure of patients to volatile organic compounds (VOCs) emitted from cured resins represents an element of concern in such applications. Here, we investigate the biocompatibility in relation to inhalation exposure of volatile emissions of three different cured commercial resins for use in printing a mouthpiece adapter for sampling exhaled breath. VOC emission rates were estimated based on direct analysis using a microchamber/thermal extractor coupled to a proton transfer reaction-mass spectrometer. Complementary analyses using comprehensive gas chromatography-mass spectrometry aided compound identification. Major VOCs emitted from the cured resins were associated with polymerization agents, additives, and postprocessing procedures and included alcohols, aldehydes, ketones, hydrocarbons, esters, and terpenes. Total VOC emissions from cubes printed using the general-purpose resin were approximately an order of magnitude higher than those of the cubes printed using resins dedicated to biomedical applications at the respective test temperatures (40 and 25 °C). Daily inhalation exposures were estimated and compared with daily tolerable intake levels or standard thresholds of toxicological concerns. The two resins intended for biomedical applications were deemed suitable for fabricating an adapter mouthpiece for use in breath research. The general-purpose resin was unsuitable, with daily inhalation exposures for breath sampling applications at 40 °C estimated at 310 μg day^-1 for propylene glycol (tolerable intake (TI) limit of 190 μg day^-1) and 1254 μg day^-1 for methyl acrylate (TI of 43 μg day^-1).

3D Printing of pH Indicator Auxetic Hydrogel Skin Wound Dressing

The benefits of enclosing pH sensors into wound dressings include treatment monitoring of wounded skin and early detection of developing chronic conditions, especially for diabetic patients. A 3D printed re-entrant auxetic hydrogel wound dressing, doped with pH indicator phenol red dye, was developed and characterized. The re-entrant auxetic design allows wound dressing adhesion to complex body parts, such as joints on arms and legs. Tensile tests revealed a yield strength of 140 kPa and Young's modulus of 78 MPa. In addition, the 3D-printed hydrogel has a swelling capacity of up to 14%, limited weight loss to 3% in six days, and porosity of near 1.2%. A reasonable pH response resembling human skin pH (4-10) was obtained and characterized. The integration of color-changing pH indicators allows patients to monitor the wound's healing process using a smartphone. In addition to the above, the mechanical properties and their dependence on post-processing were studied. The results show that the resin composition and the use of post-treatments significantly affect the quality and durability of the wound dressings. Finally, a poly (acrylic acid) (PAA) and water-based adhesive was developed and used to demonstrate the performance of the auxetic wound dressing when attached to moving body joints.

Anthracene dimer cross-linked, washing- and sterilization-free hydrogel films for multicellular spheroid generation

Three-dimensional multicellular spheroids are better in vitro cell models than two-dimensional cell monolayers; however, their applications are limited by their difficult production. PHEMA hydrogel films with honeycomb-like wrinkled patterns have been developed for high-throughput generation of multicellular spheroids with a uniform shape and size; however, the films are prepared by polymerization of the HEMA monomer, and should be washed extensively before use. Here to synthesize washing-free PHEMA hydrogel films, linear anthracene-functionalized PHEMA polymers were first synthesized by the free-radical copolymerization of HEMA and an anthracene-containing vinyl monomer. Smooth films were then prepared from the linear polymers in the wells of cell culture plates by solution casting. They were cross-linked via photo-dimerization of anthracene groups by exposing to 365 nm UV light, and patterned spontaneously by adding water to swell them. The swelling degree of the films and hence the shape of the wrinkled patterns could be facilely adjusted by adjusting the anthracene content in the linear polymers. If necessary, the cross-link density of the film and thus the shape of the wrinkled patterns could be callbacked by irradiating with 254 nm UV light, thanks to the reversibility of the photo-dimerization of anthracene. The as-prepared films exhibit a high biocompatibility and support cell growth well even without washing and sterilization. The high biocompatibility is attributed to the facts that no low molecular weight monomer, crosslinker and initiator were involved in the film preparation, and the photo-dimerization of anthracene groups produces no by-products. The films are sterilized simultaneously when cross-linked with UV irradiation, thus avoiding an additional sterilization step. PHEMA films with long-range ordered hexagonal wrinkled patterns were selected to generate multicellular spheroids of tumor cell lines. The resulting spheroids exhibit a narrow size distribution and high cell viability. Preliminary tests demonstrated their potential in the screening of anti-cancer drugs.

Influence of Test Specimen Geometry and Water Soaking on the In Vitro Cytotoxicity of Orthocryl®, Orthocryl® LC, Loctite® EA 9483 and Polypropylene

Depending on their composition, plastics have a cytotoxic potential that needs to be evaluated before they are used in dentistry, e.g., as orthodontic removable appliances. Relevant guidelines set out requirements that a potential new resin in the medical field must meet, with a wide scope for experimental design. In the present study, test specimens of different geometries consisting of varying polymers (Orthocryl^®, Orthocryl^® LC, Loctite^® EA 9483, Polypropylene) were soaked for different periods of time, then transferred to cell culture medium for 24 h, which was subsequently used for 24-h cultivation of A549 cells, followed by cytotoxicity assays (WST-1, Annexin V-FITC-propidium iodide (PI) flow cytometry). In this context, a reduction in the cytotoxic effect of the eluates of test specimens prepared from Orthocryl^® LC and Loctite^® EA 9483 was particularly evident in the Annexin V-FITC-PI assay when the soaking time was extended to 48 h and 168 h, respectively. Consistent with this, a reduced release of potentially toxic monomers into the cell culture medium, as measured by gas chromatography-mass spectrometry, was observed when the prior soaking time of test specimens of all geometries was extended. Remarkably, a significant increase in cytotoxic effect was observed in the WST-1 assay, which was accompanied by a higher release of monomers when the thickness of the test sample was increased from 0.5 to 1.0 mm, although an elution volume adapted to the surface area was used. However, further increasing the thickness to 3.0 mm did not lead to an increase in the observed cytotoxicity or monomer release. Test specimens made of polypropylene showed no toxicity under all test specimen sizes and soaking time conditions. Overall, it is recommended to perform toxicity studies of test specimens using different geometries and soaking times. Thereby, the influence of the different specimen thicknesses should also be considered. Finally, an extension of the test protocols proposed in ISO 10993-5:2009 should be considered, e.g., by flow cytometry or monomer analysis as well as fixed soaking times.

The Toxicity of Universal Dental Adhesives: An In Vitro Study

There is no consensus in the literature regarding the potential toxicity of universal dental adhesives (UDA). Being used in close proximity to the pulp, their biocompatibility should be an important factor in dental research. The aim of the present study was to evaluate the biocompatibility of UDA in an in vitro model. The study was performed using a monocyte/macrophage peripheral blood SC cell line (ATCC CRL-9855) on four specific UDA, namely: All-Bond Universal (Bisco); CLEARFIL Universal Bond Quick (Kuraray); G-Premio BOND (GC); Single Bond Universal (3M ESPE). The cytotoxicity of the investigated UDA was measured using the XTT colorimetric assay. The genotoxicity of the analyzed compounds was evaluated using an alkaline version of the comet assay. Furthermore, flow cytometry (FC) apoptosis detection was performed using the FITC Annexin V Apoptosis Detection Kit I. FC cell-cycle arrest assessment was performed using propidium iodide staining. The study observed significant differences in the toxicity of the UDA that were tested, as G-Premio BOND showed significant in vitro toxicity in all of the tests performed, while All-Bond Universal, CLEARFIL Universal Bond Quick and Single Bond Universal did not present any significant toxic effects toward SC cell line. The in vitro toxicity of UDA should be taken into consideration prior to in vivo and clinical studies. The flow cytometry could improve the accuracy of dental materials research and should be incorporated into the standardization criteria.

Diels-Alder Cross-Linked, Washing-Free Hydrogel Films with Ordered Wrinkling Patterns for Multicellular Spheroid Generation

Three-dimensional (3D) multicellular spheroids are a new generation in vitro cell model, however, their applications are severely limited by difficulties in their generation. Here patterned poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel films were synthesized for their generation. Instead of polymerization of HEMA monomers in the presence of a cross-linker, here the PHEMA films were synthesized by cross-linking furan-functionalized linear PHEMA, PHEMA-furan, and maleimide-functionalized linear PHEMA, PHEMA-mal, via Diels-Alder (DA) reaction between furan and maleimide groups. A thermal treatment temperature of 75 °C was chosen for the cross-linking reaction. The occurrence of DA reaction was confirmed by IR spectra. Using this method, cross-linked PHEMA films with smooth surface were successfully synthesized in situ in the well of cell culture plates. The films were then patterned by simply adding water to swell them. Highly ordered, honeycomb-like wrinkling patterns were successfully obtained by adjusting the furan and maleimide contents in the precursor linear polymers. The patterned hydrogel films were used to generate multicellular spheroids. Guided by the patterns, 3D spheroids with narrow size distribution, tunable size, and high cell viability were successfully obtained. The patterned PHEMA films reported here exhibited a lot of advantages. The patterning method was quite simple and required no template or special equipment. They were synthesized in situ in commercial cell culture plates. Particularly, thanks to the clean nature of the DA reaction, no low molecular weight monomer, cross-linker, initiator, or catalyst, which were potentially cytotoxic, was involved in the film synthesis, and no byproduct was produced and left in the film. The resulting films presented a high biocompatibility, allowing the avoidance of the tedious washing step. The films synthesized here were expected to have high potential for massive production of well-defined multicellular spheroids.

Comparison of Genotoxicity and Cytotoxicity of Polyvinyl Chloride and Poly(methyl methacrylate) Nanoparticles on Normal Human Lung Cell Lines

High concentrations of micro- and nanoparticles of common plastic materials present in the environment are causing an adverse health impact on living organisms. As a model study, here we report the synthesis and characterization of luminescent polyvinyl chloride (PVC) and poly(methyl methacrylate) (PMMA) nanoparticles and investigate the interaction with normal human lung fibroblast cells (IMR 90) to understand the uptake, translocation, and toxicity of PVC and PMMA nanoparticles. The synthesized particles are in the size range of 120-140 nm with a negative surface potential. The colocalization and uptake efficiency of the nanoparticles were analyzed, and the cytotoxicity assay shows significant reduction in cell viability. Cellular internalization was investigated using colocalization and dynasore inhibitor tests, which showed that the PVC and PMMA nanoparticles enter into the cell via endocytosis. The polymer nanoparticles induced a reduction in viability, decrease in adenosine triphosphate, and increase in reactive oxygen species and lactate dehydrogenase concentrations. In addition, the polymer nanoparticles caused cell cycle arrest at sub-G₁, G₀/G₁, and G2/M phases, followed by apoptotic cell death. Our results reported here are important to the emerging data on understanding the impact of common polymer particles on human health.

Genotoxicity of root canal sealers: a literature review

OBJECTIVES

Root canal sealers are widely used worldwide in endodontics to prevent reinfection and growth of surviving microorganisms. Considering the strong correlation between genetic damage and carcinogenesis, evaluation of genotoxicity induced by endodontic sealers is recommended for elucidating the true health risks to patients and professionals. The purpose of this article was to provide a comprehensive review of studies involving genotoxicity analysis of endodontic sealers and the used methodologies.

MATERIALS AND METHODS

A literature search was made in PubMed using the following combination of words "genotoxicity," "mutagenicity," "endodontic sealers," and "root canal sealers." A total of 39 articles with genotoxicity studies were selected for the present study.

RESULTS

Sealers have been ranked in decreasing order of their genotoxicity as: ZOE sealers > GIC sealers > S sealers > ER sealers > MR sealers > Novel sealers > CH sealers > CS sealers.

CONCLUSIONS

All published data showed some evidence of genotoxicity for most of the commercial root canal sealers; however, contradictory results were found, mainly for AH Plus, the most studied sealer.

CLINICAL RELEVANCE

The information provided would direct the endodontists to use the less genotoxic materials in endodontic treatment in a way to reduce DNA damage promoting oral healthcare.

Methacrylate perspective in current dental practice

OBJECTIVE

To provide a current perspective concerning dental personnel sensitivity to methacrylate materials.

OVERVIEW

Methacrylate related sensitivity and allergies are currently beyond traditional thoughts concerning denture base resins and methyl methacrylate provisional materials. Methacrylates are now ubiquitous in current dental practice and dental personnel should be aware that dental adhesives contain potent sensitizers that may also cross-sensitize individuals to other methacrylates not experienced. The growing sensitivity to 2-hydroxyethyl methacrylate (HEMA) has been described to be epidemic in nature due to the artificial nail industry with dental patients and dental personnel may be more susceptible to dental methacrylate sensitization. While contact dermatitis remains the most prevalent methacrylate-related clinical presentation, respiratory complications and asthma are increasing associated with methacrylate exposure. While additional personal protective equipment (PPE) is thought to be first protective choice, the National Institute for Occupational Safety and Health (NIOSH) considers PPE overall largely ineffective and should be considered only as a last resort.

CONCLUSION

Dental personnel need to be more aware of methacrylate sources and use workplace control measures to limit methacrylate exposures to both dental personnel and patients.

CLINICAL SIGNIFICANCE

Sensitivity to methacrylate materials is a growing dental workplace major concern and dental personnel should be aware of both the methacrylate content of current materials and the products that contain ingredients with the most sensitization potential.

The Cytotoxicity and Genotoxicity of Three Dental Universal Adhesives-An In Vitro Study

Dental universal adhesives are considered an useful tool in modern dentistry as they can be used in different etching techniques, allow for simplified protocol and provide sufficient bond strength. However, there is still no consensus as to their toxicity towards pulp. Thus, the present study aimed to evaluate the cytotoxicity and genotoxicity of three universal adhesives: OptiBond Universal, Prime&Bond Universal and Adhese in an in vitro experimental model, monocyte/macrophage cell line SC (ATCC CRL-9855). The cytotoxicity was measured by means of XTT assay, whereas the genotoxicity (comet assay) was evaluated based on the percentage of DNA present in the comet tail. Furthermore, the ability of the adhesives to induce apoptosis was analyzed using flow cytometry (FC) with the FITC annexin V/propidium iodide (PI) double staining. The analysis of the cell cycle progression was performed with FC using PI staining. OptiBond Universal presented significant, while Prime&Bond Universal and Adhese Universal had minimal cytotoxicity and genotoxicity towards human SC cells. Moreover, only OptiBond Universal increased the level of apoptosis in SC cell line. None of the adhesives showed significant cell cycle arrest, as revealed by FC analysis. Due to substantial differences in toxicity in in vitro studies of dental adhesives, there is a great need for further research in order to establish more reliable test protocols allowing for standardized methodology.

Simultaneous analysis of bisphenol A based compounds and other monomers leaching from resin-based dental materials by UHPLC-MS/MS

Resin-based dental materials have raised debates concerning their safety and biocompatibility, resulting in a growing necessity of profound knowledge on the quantity of released compounds into the oral cavity. In this context, the aim of this study was to develop a comprehensive and reliable procedure based on liquid chromatography with mass spectrometry for the simultaneous analysis of various leached compounds (including bisphenol A based compounds) in samples from in vitro experiments. Different experiments were performed to determine the optimal analytical parameters, comprising mass spectrometry parameters, chromatographic separation conditions, and sample preparation. Four internal standards were used as follows: deuterated diethyl phthalate and bisphenol A (commercially available), and deuterated analogues of triethylene glycol dimethacrylate and urethane dimethacrylate (custom-made). The optimized method was validated for linearity of the calibration curves and the associated correlation coefficient, lower limit of quantification, higher limit of quantification, and intra- and interassay accuracy and precision. Additionally, the developed liquid chromatography with tandem mass spectrometry method was applied to the analysis of leaching compounds from four resin-based dental materials. The results indicated that this method is suitable for the analysis of different target compounds leaching from dental materials. This method might serve as a valuable basis for quick and accurate quantification of leached compounds from resin-based dental materials in biological samples.

Chitosan Biomaterials for Current and Potential Dental Applications

Chitosan (CHS) is a very versatile natural biomaterial that has been explored for a range of bio-dental applications. CHS has numerous favourable properties such as biocompatibility, hydrophilicity, biodegradability, and a broad antibacterial spectrum (covering gram-negative and gram-positive bacteria as well as fungi). In addition, the molecular structure boasts reactive functional groups that provide numerous reaction sites and opportunities for forging electrochemical relationships at the cellular and molecular levels. The unique properties of CHS have attracted materials scientists around the globe to explore it for bio-dental applications. This review aims to highlight and discuss the hype around the development of novel chitosan biomaterials. Utilizing chitosan as a critical additive for the modification and improvement of existing dental materials has also been discussed.

The lower alkyl methacrylates: Genotoxic profile of non-carcinogenic compounds

All of the lower alkyl methacrylates are high production chemicals with potential for human exposure. The genotoxicity of seven mono-functional alkyl esters of methacrylic acid, i.e. methyl methacrylate, ethyl methacrylate, hydroxyethyl methacrylate, n-, i- and t-butyl methacrylate and 2 ethyl hexyl methacrylate, as well as methacrylic acid itself, the acyl component common to all, is reviewed and compared with the lack of carcinogenicity of methyl methacrylate, the representative member of the series so evaluated. Also reviewed are the similarity of structure, chemical and biological reactivity, metabolism and common metabolic products of this group of compounds which allows a category approach for assessing genotoxicity. As a class, the lower alkyl methacrylates are universally negative for gene mutations in prokaryotes but do exhibit high dose clastogenicity in mammalian cells in vitro. There is no convincing evidence that these compounds induce genotoxic effects in vivo in either sub-mammalian or mammalian species. This dichotomy of effects can be explained by the potential genotoxic intermediates generated in vitro. This genotoxic profile of the lower alkyl methacrylates is consistent with the lack of carcinogenicity of methyl methacrylate.

Toxicity of a dental adhesive compared with ionizing radiation and zoledronic acid

Background

To determine the toxicity of aqueous dilutions of a universal self-priming dental adhesive (DA) and comparing these with those elicited by exposure to ionizing radiation (IR), Zoledronic acid (Z) treatment and the synergic effects of the combined treatment with IR+Z.

Material and Methods

The genotoxic effect of DA was determined by the increase in the frequency of micronuclei in cytokinesis-blocked in cultured human lymphocytes before and after exposure to 2Gy of X-rays. The cytotoxic effect was studied by using the MTT cell viability test in normal prostate cell lines (PNT2) after exposure to different X-ray doses (0Gy-20Gy). The cell lines divided into different groups and treated with different test substances: DA in presence of O2, DA in absence of O2, Z-treated and control.

Results

An in vitro dose-dependent and time-dependent cytotoxic effect of DA, Z and IR on PNT2 cells (p>0.001) was demonstrated. DA without-O2, following the recommendations of manufacturers, had a more pronounced effect of increasing cell death than DA with-O2 (p<0.001). In the genotoxicity assay, DA at 25% of its original concentration significantly increased chromosome damage (p<0.001). The samples studied were found to be toxic, and the samples photo-polymerized in absence of O2 showed a bigger cytotoxic effect comparable to the additive toxic effect showed by the combined treatment of IR+Z.

Conclusions

Additional effort should be carried out to develop adhesives, which would reduce the release of hazardous substances; since toxic effects are similar to that reported by other agents whose clinical use is controlled by the health authorities.

Key words: Micronucleus, toxicity, dental adhesive, zolendronic acid, radiation effects.

Experimental self-etching HEMA-free adhesive systems: cytotoxicity and degree of conversion

The aim of this study was to evaluate the effect of replacing 2-hydroxyethyl methacrylate (HEMA) by methacrylate surfactant monomers on the cytotoxicity and degree of conversion of two-step self-etching dentin adhesive systems. Five HEMA-free adhesive systems were tested: Bis-EMA 10, Bis-EMA 30, PEG400, PEG400UDMA, PEG1000, and a HEMA group was used as positive control. The cytotoxicity of the experimental primers, with different monomer concentrations (2 or 20 wt%), and bond resins, containing 25 wt% surfactant, was assessed using murine fibroblast cell line 3T3 and the tetrazolium assay (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT)). The degree of conversion of the bond resins was analyzed using Fourier transform infrared spectroscopy. The data were submitted to statistical analysis using level of significance set at P < 0.05. The PEG 1000 group obtained higher cell viability in comparison with HEMA in the 2 % primer. The cell survival rate using 20 % primer showed that PEG1000 and BIS-EMA 10 were less cytotoxic than HEMA. With regard to the eluate from bond resin, the data showed that the groups BIS-EMA 10, BIS-EMA 30 and PEG400UDMA were less cytotoxic than HEMA. No statistically significant difference was found among degrees of conversion of the experimental groups and HEMA. PEG 1000, BIS-EMA 10 and 30 monomers showed the biological potential for use in new adhesive system formulations since they showed lower cytotoxicity and similar degree of conversion when compared with the HEMA-containing group.

New urethane oligodimethacrylates with quaternary alkylammonium for formulating dental composites

The aim of this study was to prepare urethane dimethacrylates containing quaternary alkyl (C16, C12) ammonium and polyethylene glycol short sequences (Mn, 400 g/mol) and to investigate their behaviour in some experimental formulations in order to evaluate their potential applicability in the dental composites field. The structure of urethane dimethacrylates has been confirmed by (1)H ((13)C) NMR and FTIR spectra, as well as by electrospray ionization tandem mass spectroscopy, and gel permeation chromatography measurements. The effects of the cationic macromers on the properties of the filled/non-filled composites were examined through FTIR, photoDSC, and specific measurements as volumetric polymerization shrinkage, water sorption/solubility, contact angle, mechanical parameters, and morphology. The monomer compositions based on cationic dimethacrylate (6.88-27.52 wt%), BisGMA-analogue (48.18-68.82 wt%) and TEGDMA (23.3 wt%) showed a good photoreactivity in terms of double bond conversion (DC, 50.07-68.81 %) and polymerization rate (Rp, 0.099-0.141 s(-1)) measured by photoDSC compared to a control sample (BisGMA-1/TEGDMA: DC, 45.91 %; Rp, 0.162 s(-1)), while the polymerization shrinkage increased in acceptable limits (5.37-7.74 vol%). The mechanical properties (compressive, flexural and diametral tensile strength) of the composite resin incorporating 70 wt% silanized zirconium silicate micro/nanopowder can be modulated by the initial co-monomer concentrations.

Effect of novel chitosan-fluoroaluminosilicate resin modified glass ionomer cement supplemented with translationally controlled tumor protein on pulp cells

Dental materials that can promote cell proliferation and function is required for regenerative pulp therapy. Resin modified glass ionomer cement (RMGIC), a broadly used liner or restorative material, can cause apoptosis to pulp cells mainly due to HEMA (2-hydroxyethyl methacrylate), the released residual monomer. Recent studies found that chitosan and albumin could promote release of protein in GIC while translationally controlled tumor protein (TCTP) has an anti-apoptotic activity against HEMA. The aim of this study was to examine the effect of chitosan and albumin modified RMGIC (Exp-RMGIC) supplemented with TCTP on pulp cell viability and mineralization. Exp-RMGIC+TCTP was composed of RMGIC powder incorporated with 15 % of chitosan, 5 % albumin and supplemented with TCTP mixed with the same liquid components of RMGIC. The effect of each specimen on pulp cells was examined using the Transwell plate. From the MTT assay, Exp-RMGIC+TCTP had the highest percentages of viable cells (P < 0.05) at both 24 and 74 h. Flow cytometry revealed that, after 24 h, Exp-RMGIC+TCTP gave the lowest percentages of apoptotic cells compared to other groups. There was no difference in alkaline phosphatase (ALP) activity among different formula of the specimens, while cells cultured in media with TCTP had higher ALP activity. Von Kossa staining revealed that RMGIC+TCTP, and Exp-RMGIC+TCTP had higher percentages of calcium deposit area compared to those without TCTP. It was concluded that Exp-RMGIC supplemented with TCTP had less cytotoxicity than RMGIC and can protect cells from apoptosis better than RMGIC supplemented with TCTP.

DNA fragmentation induced by all-trans retinoic acid and its steroidal analogue EA-4 in C2 C12 mouse and HL-60 human leukemic cells in vitro

We have recently shown that retinoic acid induces micronucleation mainly via chromosome breakage (Alakhras et al. Cancer Lett 2011; 306: 15-26). To further study retinoic acid clastogenicity and evaluate DNA damaging potential we investigated the ability of (a) all-trans retinoic acid and its steroidal analogue EA-4 to induce DNA fragmentation by using Comet assay under alkaline unwinding and neutral condition electrophoresis, and (b) the retinoids under study to induce small (0-1 kb) DNA fragments. Two cell lines, C2C12 mouse cells and HL-60 human leukemic cells were used in this study. We found that all-trans retinoic acid and its steroidal analogue EA-4 (a) provoke DNA migration due to DNA fragmentation as it is shown by the increased values of Comet parameters, and (b) induce significantly small-size fragmented genomic DNA as indicated by the quantification of necrotic/apoptotic small DNA segments in both cell systems. A different response between the two cell lines was observed in relation to retinoid ability to increase the percentage of DNA in the tail as well as break DNA in to small fragments. Our findings confirm the ability of retinoic acid to provoke micronucleation by disrupting DNA into fragments, among which small pieces of double-stranded DNA up to 1 kb are identified.

Vitamin C in cultured human (HeLa) cells: lack of effect on DNA protection and repair

AIMS

Dietary antioxidants, including vitamin C, may be in part responsible for the cancer-preventive effects of fruits and vegetables. Human intervention trials with clinical endpoints have failed to confirm their protective effects, and mechanistic studies have given inconsistent results. Our aim was to investigate antioxidant/ pro-oxidant effects of vitamin C at the cellular level.

EXPERIMENTAL APPROACH

We have used the comet assay to investigate effects of vitamin C on DNA damage, antioxidant status, and DNA repair, in HeLa (human tumor) cells, and HPLC to measure uptake of vitamin C into cells.

RESULTS

Even at concentrations in the medium as high as 200 μM, vitamin C did not increase the background level of strand breaks or of oxidized purines in nuclear DNA. Vitamin C is taken up by HeLa cells and accumulates to mM levels. Preincubation of cells with vitamin C did not render them resistant to strand breakage induced by H2O2 or to purine oxidation by photosensitizer plus light. Vitamin C had no effect on the rate of repair of strand breaks or oxidized bases by HeLa cells. However, vitamin C at a concentration of less than 1 μM, or extract from cells preincubated for 6 h with vitamin C, was able to induce damage (strand breaks) in lysed, histone-depleted nuclei (nucleoids).

CONCLUSION

In these cultured human cells, vitamin C displays neither antioxidant nor pro-oxidant properties; nor does it affect DNA strand break or base excision repair.

Photocrosslinked alginate with hyaluronic acid hydrogels as vehicles for mesenchymal stem cell encapsulation and chondrogenesis

Ionic crosslinking of alginate via divalent cations allows for high viability of an encapsulated cell population, and is an effective biomaterial for supporting a spherical chondrocyte morphology. However, such crosslinking chemistry does not allow for injectable and stable hydrogels which are more appropriate for clinical applications. In this study, the addition of methacrylate groups to the alginate polymer chains was utilized so as to allow the free radical polymerization initiated by a photoinitiator during UV light exposure. This approach establishes covalent crosslinks between methacrylate groups instead of the ionic crosslinks formed by the calcium in unmodified alginate. Although this approach has been well described in the literature, there are currently no reports of stem cell differentiation and subsequent chondrocyte gene expression profiles in photocrosslinked alginate. In this study, we demonstrate the utility of photocrosslinked alginate hydrogels containing interpenetrating hyaluronic acid chains to support stem cell chondrogenesis. We report high cell viability and no statistical difference in metabolic activity between mesenchymal stem cells cultured in calcium crosslinked alginate and photocrosslinked alginate for up to 10 days of culture. Furthermore, chondrogenic gene markers are expressed throughout the study, and indicate robust differentiation up to the day 14 time point. At early time points, days 1 and 7, the addition of hyaluronic acid to the photocrosslinked scaffolds upregulates gene markers for both the chondrocyte and the superficial zone chondrocyte phenotype. Taken together, we show that photocrosslinked, injectable alginate shows significant potential as a delivery mechanism for cell-based cartilage repair therapies.

Effects of ethanol and dimethyl sulfoxide on solubility and cytotoxicity of the resin monomer triethylene glycol dimethacrylate

Several in vitro studies have reported contrasting values for triethylene glycol-dimethacrylate (TEGDMA) concentrations shown to induce cytotoxic effects. The aim of this study was to evaluate the effective concentrations of TEGDMA reached under the routine experimental conditions used in biocompatibility in vitro tests and determines changes in cytotoxicity and the associated production of reactive oxygen species (ROS) based on different TEGDMA solutions. TEGDMA was added to cell culture medium either directly or previously dissolved in dimethyl sulfoxide (DMSO) or ethanol (EtOH), both in the presence and absence of cells. Intracellular and extracellular TEGDMA concentrations were determined by high performance liquid chromatography (HPLC). The cytotoxicity effects of TEGDMA preparations were determined in 3T3-fibroblasts by 3-(4,5 dimethyiazol-2-1)-2-5-diphenyl tetrazolium bromide assay. The production of ROS was measured by flow cytometry. In the absence of cells the effective final TEGDMA concentrations obtained in Dulbecco's Modified Eagle Medium were significantly lower than the nominal one. When 2 mmol/L TEGDMA was first solubilized in DMSO or EtOH, a significant decrease in cell viability, and an increase in ROS production-compared to pure TEGDMA-was observed. After 2 h of incubation, TEGDMA previously dissolved in DMSO or ETOH was reduced by 15% and 20%, respectively, whereas otherwise it remained unaffected. Our results demonstrate that the effective concentration of TEGDMA dissolved in culture medium (in the presence or absence of solvents) does not concur with the nominal one. Therefore, the presence of the utilized solvents does not substantially alter the monomer solubility but eases its entrance into the cells thus improving its cytotoxic potency.

Dental methacrylates may exert genotoxic effects via the oxidative induction of DNA double strand breaks and the inhibition of their repair

Methacrylate monomers used in dentistry have been shown to induce DNA double strand breaks (DSBs), one of the most serious DNA damage. In the present work we show that a model dental adhesive consisting of 45% 2-hydroxyethyl methacrylate (HEMA) and 55% bisphenol A-diglycidyl dimethacrylate (Bis-GMA) at concentrations up to 0.25 mM Bis-GMA induced oxidative DNA in cultured primary human gingival fibroblasts (HGFs) as evaluated by the comet assay and probed with human 8-hydroxyguanine DNA-glycosylase 1. HEMA/Bis-GMA induced DSBs in HGFs as assessed by the neutral comet assay and phosphorylation of the H2AX histone and sodium ascorbate or melatonin (5-methoxy-N-acetyltryptamine) both at 50 μM reduced the DSBs, they also inhibited apoptosis induced by HEMA/Bis-GMA. The adhesive slowed the kinetics of the repair of DNA damage induced by hydrogen peroxide in HGFs, while sodium ascorbate or melatonin improved the efficacy of H₂O₂-induced damage in the presence of the methacrylates. The adhesive induced a rise in the G2/M cell population, accompanied by a reduction in the S cell population and an increase in G0/G1 cell population. Sodium ascorbate or melatonin elevated the S population and reduced the G2/M population. In conclusion, HEMA/Bis-GMA induce DSBs through, at least in part, oxidative mechanisms, and these compounds may interfere with DSBs repair. Vitamin C or melatonin may reduce the detrimental effects induced by methacrylates applied in dentistry.

Anti-adhesive and pro-apoptotic effects of 2-hydroxyethyl methacrylate on human gingival fibroblasts co-cultured with Streptococcus mitis strains

AIM

To evaluate and observe the cellular reactions that occur during the interaction/integration between 2-hydroxyethyl methacrylate/host tissue/microbial environment, in a co-culture of human gingival fibroblasts (HGF) and Streptococcus mitis strains.

METHODOLOGY

Streptococcus mitis were cultured with strains in the presence of 3 mmol L(-1) HEMA for 48 h and 72 h. Cytotoxicity was evaluated by the trypan blue dye exclusion test. Apoptosis was evaluated by TUNEL analysis. Adhesion was evaluated by immunofluorescence and western blot analyses. Quantitative analyses of the results were acquired by Qwin Plus 3.5 and QuantityOne I-D analysis software, respectively. The statistical significance of the results was evaluated using t-tests and linear regression tests.

RESULTS

The trypan blue dye test revealed 47.3% and 46.5% of dead fibroblasts after 48 and 72 h HEMA treatment, respectively, while bacterial viability was not influenced by the presence of HEMA and fibroblasts. The expression of pro-collagen I, involved in fibroblast adhesion, in untreated samples ranged from 12.49% to 6.91% of the positive area after 48 and 72 h, respectively, dropping to below 2% of the positive area in the other experimental conditions. Unlike the trypan blue test, co-cultured samples treated with HEMA showed 20% and 25% versus 17% and 21% (after 48 and 72 h, respectively) of apoptotic cells.

CONCLUSIONS

The evidence for HEMA toxicity and anti-adhesive effects against eukaryotic cells was reduced in the presence of bacteria, suggesting that dental resins should be well polymerized to avoid the spread of toxic monomers within the mouth.

Protective effect of chitosan oligosaccharide lactate against DNA double-strand breaks induced by a model methacrylate dental adhesive

Background

Monomers of methacrylates used in restorative dentistry have been recently reported to induce DNA double-strand breaks (DSBs) in human gingival fibroblasts (HGFs) in vitro. Because such monomers may penetrate the pulp and oral cavity due to the incompleteness of polymerization and polymer degradation, they may induce a similar effect in vivo. DSBs are the most serious type of DNA damage and if misrepaired or not repaired may lead to mutation, cancer transformation and cell death. Therefore, the protection against DSBs induced by methacrylate monomers released from dental restorations is imperative.

Material/Methods

We examined the protective action of chitosan oligosaccharide lactate (ChOL) against cytotoxic and genotoxic effects induced by monomers of the model adhesive consisting of 55% bisphenol A-diglycidyl dimethacrylate (Bis-GMA) and 45% 2-hydroxyethyl methacrylate (HEMA). We evaluated the extent of DSBs by the neutral comet assay and the phosphorylation of the H2AX histone test.

Results

ChOL increased the viability of HGFs exposed to Bis-GMA/HEMA as assessed by flow cytometry. ChOL decreased the extent of DSBs induced by Bis-GMA/HEMA as evaluated by neutral comet assay and phosphorylation of the H2AX histone. ChOL did not change mechanical properties of the model adhesive, as checked by the shear bond test. Scanning electron microscopy revealed a better sealing of the dentinal microtubules in the presence of ChOL, which may protect pulp cells against the harmful action of the monomers.

Conclusions

ChOL can be considered as an additive to methacrylate-based dental materials to prevent DSBs induction, but further studies are needed on its formulation with the methacrylates.

Perspectives on the use of melatonin to reduce cytotoxic and genotoxic effects of methacrylate-based dental materials

Melatonin (5-methoxy-N-acetyltryptamine), an indoleamine produced in the pineal gland and many other organs, displays a wide spectrum of protective effects against cell injury of various origins. Contemporary dental restorative materials mainly consist of methacrylate polymers with some additives. However, because of the incompleteness of polymerization process in situ as well as mechanical shearing and enzymatic degradation, methacrylate monomers are released from the restoration into the oral cavity and the pulp, from where they gain access to other tissues and organs. Such monomers have displayed toxic properties in many in vivo and in vitro studies, including cytotoxicity and genotoxicity and a considerable portion of these effects is underlined by the oxidative action of these compounds. As melatonin shows biocompatibility with the oral cavity and displays antioxidative properties, it may be considered as a protective agent against harmful effects of methacrylate monomers derived from dental restorations. Melatonin decreases cytotoxic and genotoxic effects of methacrylate monomers used in dentistry, and it does not influence the bond strength of dental composites. This opens a new possible application of melatonin to improve properties of biomaterials used in dentistry.

Translationally controlled tumor protein against apoptosis from 2-hydroxy-ethyl methacrylate in human dental pulp cells

2-Hydroxy-ethyl methacrylate (HEMA) is a major monomer released from resin-base dental restorative materials. HEMA is cytotoxic to pulp cells and leads to apoptosis. This study examined the effect of Translationally Controlled Tumor Protein (TCTP) against apoptosis from HEMA. TCTP from banana prawn (Penaeus merguiensis) was cloned and the protein was purified. It significantly increased the number of viable of HEMA-treated cells compared to HEMA-treated cells alone. Flow cytometry indicated the addition of TCTP at 10 μg/ml to 8 and 10 mM HEMA decreased the apoptotic cells from 20 to 10%. The proliferative property and anti-apoptotic activity against HEMA was concentration dependent. It was interesting that the added TCTP was not detected inside the cells and the native human TCTP was decreased after treated with HEMA and TCTP (20 μg/ml) + HEMA(10 mM) for 24 h. These results provided preliminary information, which may contribute to the development of less toxic dental materials.

2-hydroxylethyl methacrylate (HEMA), a tooth restoration component, exerts its genotoxic effects in human gingival fibroblasts trough methacrylic acid, an immediate product of its degradation

HEMA (2-hydroxyethyl methacrylate), a methacrylate commonly used in dentistry, was reported to induce genotoxic effects, but their mechanism is not fully understood. HEMA may be degraded by the oral cavity esterases or through mechanical stress following the chewing process. Methacrylic acid (MAA) is the primary product of HEMA degradation. In the present work we compared cytotoxic and genotoxic effects induced by HEMA and MAA in human gingival fibroblasts (HGFs). A 6-h exposure to HEMA or MAA induced a weak decrease in the viability of HGFs. Neither HEMA nor MAA induced strand breaks in the isolated plasmid DNA, but both compounds evoked DNA damage in HGFs, as evaluated by the alkaline comet assay. Oxidative modifications to the DNA bases were monitored by the DNA repair enzymes Endo III and Fpg. DNA damage induced by HEMA and MAA was not persistent and was removed during a 120 min repair incubation. Results from the neutral comet assay indicated that both compounds induced DNA double strand breaks (DSBs) and they were confirmed by the γ-H2AX assay. Both compounds induced apoptosis and perturbed the cell cycle. Therefore, methacrylic acid, a product of HEMA degradation, may be involved in its cytotoxic and genotoxic action.

Bisphenol A-glycidyl methacrylate induces a broad spectrum of DNA damage in human lymphocytes

Bisphenol A-glycidyl methacrylate (BisGMA) is monomer of dental filling composites, which can be released from these materials and cause adverse biologic effects in human cells. In the present work, we investigated genotoxic effect of BisGMA on human lymphocytes and human acute lymphoblastic leukemia cell line (CCRF-CEM) cells. Our results indicate that BisGMA is genotoxic for human lymphocytes. The compound induced DNA damage evaluated by the alkaline, neutral, and pH 12.1 version of the comet assay. This damage included oxidative modifications of the DNA bases, as checked by DNA repair enzymes EndoIII and Fpg, alkali-labile sites and DNA double-strand breaks. BisGMA induced DNA-strand breaks in the isolated plasmid. Lymphocytes incubated with BisGMA at 1 mM were able to remove about 50% of DNA damage during 120-min repair incubation. The monomer at 1 mM evoked a delay of the cell cycle in the S phase in CCRF-CEM cells. The experiment with spin trap—DMPO demonstrated that BisGMA induced reactive oxygen species, which were able to damage DNA. BisGMA is able to induce a broad spectrum of DNA damage including severe DNA double-strand breaks, which can be responsible for a delay of the cell cycle in the S phase.