Physicochemical comparison of chitin and chitosan obtained from larvae and adult Colorado potato beetle (Leptinotarsa decemlineata)

A comprehensive characterization of Hermetia illucens derived chitosan produced through homogeneous deacetylation

The increasing demand for chitin and chitosan is driving research to explore alternative sources to crustaceans. Insects, particularly bioconverters as Hermetia illucens, are promising substitutes as they process food industry waste into valuable molecules, including chitin. Chitosan can be produced by chitin deacetylation: hot deacetylation to obtain a heterogeneous chitosan, the commonly produced, and cold deacetylation to obtain a homogeneous chitosan, not widely available. The two different treatments lead to a different arrangement of the amine and acetyl groups in the chitosan structure, affecting its molecular weight, deacetylation degree, and biological activity. This is the first report on the production and chemical-physical and biological characterization of homogenous chitosan derived from H. illucens larvae, pupal exuviae, and adults. This work, in addition to the report on heterogeneous chitosan by our research group, completes the overview of H. illucens chitosan. The yield values obtained for homogeneous chitosan from pupal exuviae (3 and 7 %) are in the range of insect (2-8 %) and crustaceans (4-15 %) chitosan. The evaluation of the antioxidant activity and antimicrobial properties against Gram-negative (Escherichia coli) and Gram-positive (Micrococcus flavus) bacteria confirmed the great versatility of H. illucens chitosan for biomedical and industrial applications and its suitability as an alternative source to crustaceans.

Update on Chitin and Chitosan from Insects: Sources, Production, Characterization, and Biomedical Applications

Insects, renowned for their abundant and renewable biomass, stand at the forefront of biomimicry-inspired research and offer promising alternatives for chitin and chitosan production considering mounting environmental concerns and the inherent limitations of conventional sources. This comprehensive review provides a meticulous exploration of the current state of insect-derived chitin and chitosan, focusing on their sources, production methods, characterization, physical and chemical properties, and emerging biomedical applications. Abundant insect sources of chitin and chitosan, from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, Odonata, and Ephemeroptera orders, were comprehensively summarized. A variety of characterization techniques, including spectroscopy, chromatography, and microscopy, were used to reveal their physical and chemical properties like molecular weight, degree of deacetylation, and crystallinity, laying a solid foundation for their wide application, especially for the biomimetic design process. The examination of insect-derived chitin and chitosan extends into a wide realm of biomedical applications, highlighting their unique advantages in wound healing, tissue engineering, drug delivery, and antimicrobial therapies. Their intrinsic biocompatibility and antimicrobial properties position them as promising candidates for innovative solutions in diverse medical interventions.

Crucial roles of specialized chitinases in elytral and hindwing cuticles construction in Leptinotarsa decemlineata

BACKGROUND

The Colorado potato beetle (CPB), Leptinotarsa decemlineata, is a major potato (Solanum tuberosum) pest, infesting over 16 million km2 and causing substantial economic losses. The insect cuticle forms an apical extracellular matrix (ECM) envelope covering exposed organs to direct morphogenesis and confer structural protection. While select chitinase (Cht) genes have proven essential for larval development, their potential activities directing ECM remodeling underlying adult wing maturation remain undefined.

RESULTS

We investigated the expression patterns and performed an oral RNA interference (RNAi) screen targeting 19 LdChts in late-instar L. decemlineata larvae. Subsequently, we assessed their effects on adult eclosion and wing characteristics. Knockdown of LdCht5, LdCht7, LdCht10, LdIDGF2, and LdIDGF4, as well as others from Group IV (LdCht15, LdCht12, LdCht17, and LdCht13) and Groups VII-X (LdCht2, LdCht11, LdCht1, and LdCht3), resulting in shrunken, misshapen elytra with reduced areal density, as well as transverse wrinkling and impaired wing-tip folding in hindwings. Scanning electron micrographs revealed eroded elytral ridges alongside thinned, ruptured hindwing veins, indicative of mechanical fragility post-LdCht suppression. Spectroscopic analysis uncovered biomolecular alterations underlying the elytral anomalies, including decreases in peaks representing chitin, proteins, and lipids. This loss of essential ECM components provides evidence for the fragility, wrinkling, and shrinkage observed in the RNAi groups.

CONCLUSION

Our findings elucidate the crucial role of chitinases in the turnover of chitinous cuticles on beetle wings, offering insights into RNAi-based control strategies against this invasive pest. © 2024 Society of Chemical Industry.

Advances in guided bone regeneration membranes: a comprehensive review of materials and techniques

Guided tissue/bone regeneration (GTR/GBR) is a widely used technique in dentistry to facilitate the regeneration of damaged bone and tissue, which involves guiding materials that eventually degrade, allowing newly created tissue to take its place. This comprehensive review the evolution of biomaterials for guided bone regeneration that showcases a progressive shift from non-resorbable to highly biocompatible and bioactive materials, allowing for more effective and predictable bone regeneration. The evolution of biomaterials for guided bone regeneration GTR/GBR has marked a significant progression in regenerative dentistry and maxillofacial surgery. Biomaterials used in GBR have evolved over time to enhance biocompatibility, bioactivity, and efficacy in promoting bone growth and integration. This review also probes into several promising fabrication techniques like electrospinning and latest 3D printing fabrication techniques, which have shown potential in enhancing tissue and bone regeneration processes. Further, the challenges and future direction of GTR/GBR are explored and discussed.

Hermetia illucens, an innovative and sustainable source of chitosan-based coating for postharvest preservation of strawberries

The ability of chitosan produced from pupal exuviae of Hermetia illucens to retard the decay of the local strawberry (Fragaria x ananassa) cultivar Melissa was investigated for the first time in this paper. The results demonstrated the effectiveness of insect chitosan compared to the commercial polymer in preserving and enhancing, at the same time, some physicochemical parameters (weight loss, pH and soluble solids content) and nutraceutical properties (total polyphenol content, total flavonoid content and total antioxidant activity) of strawberries stored at RT, 4°C and at mixed storage conditions (4°C + RT). Moreover, chitosan from H. illucens was also effective in reducing fungal decay and improving fruit shelf life. The obtained results confirm that insect chitosan, particularly deriving from H. illucens pupal exuviae, can be a viable alternative to crustacean one in safeguarding postharvest fruits.

Investigation on Akis granulifera (Coleoptera, Sahlberg, 1823) as a potential source of chitin and chitosan: Extraction, characterization and hydrogel formation

The majority of studies have focused on the industrial exploitation of marine fisheries waste through the production of natural bioactive bioploymeres such as chitin and chitosan. However, in recent years, beetles are increasingly attracting the interest of scientists as a source of chitin and chitosan for the preparation of hydrogels for sustainable engineering development. In the present work, we focus on the study for the first time a new Moroccan species of beetle (Akis granulifera Sahlberg, 1823), for the extraction of chitin and the elaboration of chitosan. A chemical extraction process was used. Then, physicochemical characterizations by FT-IR, SEM, XRD, 1H NMR, TGA/DSC, Potentiometry, Viscosimetry, and elemental analysis were performed. In addition, to evaluate its physicochemical quality, the elaborated chitosan is combined with alginate to form a hydrogel. This hydrogel was effectively characterized by SEM, DRX and FTIR to show the potential of chitosan from Akis granulifera in biomaterial applications.

Enhanced immune responses in dexamethasone immunosuppressed male rats supplemented with herbal extracts, chitosan nanoparticles, and their conjugates

Nowadays, the world is challenged with highly contagious diseases, one of their preliminary virulence mechanisms is the suppression of innate immunity. Therefore, promoting natural immunity is a good precautionary strategy. we investigated and compared the effects of several natural herbal extracts -Moringa oleifera, Ziziphus spina christi, and Saussurea costus, and chitosan nanoparticles (CS NPs)- as well as conjugated extracts with CS NPs on the immunological parameters of dexamethasone immunosuppressed (IS) male rats. The plant extracts were assessed for total flavonoids, phenolics, and antioxidant activity. The CS NPs and their conjugates were characterized using particles size, zeta potentials, and Fourier-transform infrared spectroscopy analyses. The chemical analysis of the plant extracts, CS NPs, and their conjugates was performed using energy dispersive X-ray fluorescence, and their cytotoxicity was evaluated in human lung fibroblast (WI-38) and human embryonic kidney (HEK-293) cell lines. For in vivo evaluations, 72 adult male rats were divided into 9 groups: control, IS, three plant extracts, CS, and conjugates of the three plant extracts and CS NPs. Oral supplementation (day after day) lasted for 28 days. Liver, kidney, and spleen tissue samples were collected for histopathology and Ki-67 expression analyses. The results revealed that the plant extracts and CS improved the total leukocyte counts, complement 3, complement 4, interferon-gamma, and tumor necrosis factor levels at day 28. However, the plant extract-CS NPs conjugates faster and have higher immunostimulatory effects at day 14. Furthermore, the atrophied white pulp of the spleen induced by dexamethasone was alleviated, and Ki-67 expression was elevated in all the treated groups. Conclusively, the conjugates of Moringa oleifera, Ziziphus spina christi, and Saussurea costus extract with CS NPs demonstrated more potent and rapid immune responses at lower doses and concentrations compared to the plant extracts or CS NPs alone, without causing liver or kidney injuries. Thus, supplementation of these conjugated plant extracts at lower doses and concentrations is recommended to improve immunity while considering safety considerations.

Impact of local drug delivery and natural agents as new target strategies against periodontitis: new challenges for personalized therapeutic approach

Periodontitis is a persistent inflammation of the soft tissue around the teeth that affects 60% of the population in the globe. The self-maintenance of the inflammatory process can cause periodontal damage from the alveolar bone resorption to tooth loss in order to contrast the effects of periodontitis, the main therapy used is scaling and root planing (SRP). At the same time, studying the physiopathology of periodontitis has shown the possibility of using a local drug delivery system as an adjunctive therapy. Using local drug delivery devices in conjunction with SRP therapy for periodontitis is a potential tool since it increases drug efficacy and minimizes negative effects by managing drug release. This review emphasized how the use of local drug delivery agents and natural agents could be promising adjuvants for the treatment of periodontitis patients affected or not by cardiovascular disease, diabetes, and other system problems. Moreover, the review evidences the current issues and new ideas that can inspire potential later study for both basic research and clinical practice for a tailored approach.

Chitosan and Its Derivatives: Preparation and Antibacterial Properties

This comprehensive review illuminates the various methods of chitosan extraction, its antibacterial properties, and its multifarious applications in diverse sectors. We delve into chemical, physical, biological, hybrid, and green extraction techniques, each of which presents unique advantages and disadvantages. The choice of method is dictated by multiple variables, including the desired properties of chitosan, resource availability, cost, and environmental footprint. We explore the intricate relationship between chitosan's antibacterial activity and its properties, such as cationic density, molecular weight, water solubility, and pH. Furthermore, we spotlight the burgeoning applications of chitosan-based materials like films, nanoparticles, nonwoven materials, and hydrogels across the food, biomedical, and agricultural sectors. The review concludes by highlighting the promising future of chitosan, underpinned by technological advancements and growing sustainability consciousness. However, the critical challenges of optimizing chitosan's production for sustainability and efficiency remain to be tackled.

Edible insects as emerging food products-processing and product development perspective

Edible insects (EI) are also becoming as a part of the diet due to their nutritional value and health benefits in many regions of the world. These EI are inexhaustible sources accessible by garnering from the wild with high feed conversion efficiency. Appreciating the budding of EI in justifiable food production, enlightening food security and biodiversity conversion, is promising a sufficient supply of the insect resource for future food to the world. These insects are processed to develop new products, improve organoleptic and nutritional parameters as well as the extension of shelf life. In this review, we discuss the edible insect characteristics, the potential application of EI in food industry, processing, pretreatments, drying, extraction of edible compounds like protein, lipid and chitin various food products formulation, safety regulation. Availability of broad nutritional spectrum of EI includes protein, mono and poly unsaturaturated fatty acids, amino acids, vitamins, amino aids and minerals has been used as an ingredient in development of various forms of food products such as flours in the form of whole insect powder, protein isolate, canned products, extruded products, hard candies, spreads, liquor infusion, cookies and other products.

Use of Insect-Derived Chitosan for the Removal of Methylene Blue Dye from Wastewater: Process Optimization Using a Central Composite Design

Insects are a readily available source of chitosan due to their high reproductive rates, ease of breeding, and resistance to changes in their ecosystem. This study aimed to extract chitosan from several widespread insects: Blaps lethifera (CS-BL), Pimelia fernandezlopezi (CS-PF), and Musca domestica (CS-MD). The study was also extended to using the obtained chitosans in removing methylene blue dye (MB) from wastewater. The source of the chitosan, the initial concentration of MB dye, and the reaction time were chosen as the working parameters. The experiments were designed using a central composite design (CCD) based on the dye removal efficiency as the response variable. The experimental work and statistical calculation of the CCD showed that the dye removal efficiency ranged from 35.9% to 88.7% for CS-BL, from 18.8% to 47.1% for CS-PF, and from 10.3% to 29.0% for CS-MD at an initial MB concentration of 12.79 mg/L. The highest methylene blue dye removal efficiency was 88.7% for CS-BL at a reaction time of 120 min. This indicates that the extraction of chitosan from insects (Blaps lethifera) and its application in dye removal is a promising, environmentally friendly, economical, biodegradable, and cost-effective process. Furthermore, the CCD is a statistical experimental design technique that can be used to optimize process variables for removing other organic pollutants using chitosan.

Extraction and Characterization of Chitin and Chitosan from Tenebrio Molitor Beetles and Investigation of its Antibacterial Effect Against Pseudomonas aeruginosa

Background

Chitin and chitosan are utilized in many industries such as pharmacy, biotechnology, and medicine. The mealworm beetle, Tenebrio Molitor, is simply breaded and does not require a vast production space.

Materials and Methods

In this study, we extracted chitin and chitosan using two different methods from Tenebrio Molitor adult beetles. Then we studied their physical and chemical properties along with their antibacterial effect.

Results

Using two new methods we extracted 13, 3%, and 17.7% chitin from the dry mealworm beetle which was higher than in previous studies. The chitosan yield of the extracted chitin was 78.26% and 76.43%, respectively. The observed FTIR peaks for chitin and chitosan in this study were in accordance with the characteristic peaks. The degree of acetylation of chitin was 95.09% and 92.55% and the degree of deacetylation was 75.84%, and 72.6% from the first and second methods, respectively. The extracted chitosan also showed an antibacterial effect against Pseudomonas aeruginosa.

Conclusions

Our study demonstrated that chitin and chitosan extracted from adult mealworm beetles could be considered as a replacement for commercial chitosan and needs further studies.

Local Delivery and Controlled Release Drugs Systems: A New Approach for the Clinical Treatment of Periodontitis Therapy

Periodontitis is an inflammatory disease of the gums characterized by the degeneration of periodontal ligaments, the formation of periodontal pockets, and the resorption of the alveolar bone, which results in the destruction of the teeth's supporting structure. Periodontitis is caused by the growth of diverse microflora (particularly anaerobes) in the pockets, releasing toxins and enzymes and stimulating the immune system. Various approaches, both local and systemic, have been used to treat periodontitis effectively. Successful treatment depends on reducing bacterial biofilm, bleeding on probing (BOP), and reducing or eliminating pockets. Currently, the use of local drug delivery systems (LDDSs) as an adjunctive therapy to scaling and root planing (SRP) in periodontitis is a promising strategy, resulting in greater efficacy and fewer adverse effects by controlling drug release. Selecting an appropriate bioactive agent and route of administration is the cornerstone of a successful periodontitis treatment plan. In this context, this review focuses on applications of LDDSs with varying properties in treating periodontitis with or without systemic diseases to identify current challenges and future research directions.

Effect of milling intensity on the properties of chitin, chitosan and chitosan films obtained from grasshopper

To obtain high-quality insect products, milling was used as a modification tool and its effect on grasshopper chitin, chitosan and chitosan films was investigated. Three grasshopper powders were obtained and classified into coarse-milled powder (CMP, D90 = 956 μm), medium-milled powder (MMP, D90 = 492 μm), and ultrafine-milled powder (UMP, D90 = 79.1 μm). Fourier transform infrared spectroscopy illustrated that no drastic change due to milling was observed, but the crystallinity (X-ray diffraction) and thermal stability (Thermogravimetric analysis) of the chitin, chitosan and chitosan films reduced with increasing milling intensity. Besides, the purity of the chitin and the yield of chitosan obtained from UMP were improved. Chitosan prepared from UMP was also characterized by high degree of deacetylation (65.6 %) and solubility and rather low molecular weight (11.5 kDa), viscosity and water/fat binding capacity. The finer the powder used as the extraction material, the thinner the chitosan films and the more compact the structure. On the whole, the chitosan films prepared from the MMP had higher mechanical properties and better moisture-keeping ability on strawberries compared with CMP and UMP films. This study establishes the role milling intensity played in the modification of grasshopper products and provides a reference for practical applications.

Chitosan electrospun nanofibers derived from Periplaneta americana residue for promoting infected wound healing

Periplaneta americana has been used medicinally for years to treat a wide variety of skin lesions or ulcers. However, a sizable portion of the drug residues that are retained after extraction are routinely thrown away, thus posing a hazard to the environment and depleting resources. In this study, low molecular weight Periplaneta americana chitosan (LPCS) and high molecular weight Periplaneta americana chitosan (HPCS) were extracted from Periplaneta americana residue (PAR) based on the conventional acid-base method and two deacetylation methods. Moreover, the physicochemical properties and structural differences between the above two chitosan and commercial chitosan (CS) were compared using different methods. Next, two nanofibers comprising different ratios of Periplaneta americana chitosan (LPCS or HPCS), polyvinyl alcohol (PVA), and polyethylene oxide (PEO) were prepared and optimized. The above nanofibers exhibited excellent mechanical properties, antibacterial properties, and biocompatibility while facilitating wound healing in an infected rat whole-layer wound model by promoting wound closure, epithelialization, collagen deposition, and inflammation reduction. In brief, this study produced an effective and affordable wound dressing and offered a suggestion for the comprehensive utilization of Periplaneta americana residue.

A New Mediterranean Flour Moth-Derived Chitosan: Characterization and Co-electrospun Hybrid Fabrication

In this study, the chitin of adult Mediterranean flour moth (Ephestia kuheniella) (Cht) was extracted and then converted to chitosan by deacetylation process to achieve the chitosan derived from E. kuheniella (Chs_fm). The new chitosan-based scaffold was produced using the polyvinyl alcohol (PVA) co-electrospinning technique. The degree of deacetylation was obtained using the distillation-titration and Fourier transform infrared spectroscopy. The surface morphology and crystallinity index of Chs_fm were observed using scanning electron microscopy and X-ray diffraction analysis, respectively, and compared with the commercial chitosan (Chs_c). Thermogravimetric analysis was used to estimate two chitosans' water content and thermal stability. The average molecular mass analysis was performed using viscometry. Moreover, the minimum inhibitory concentration and DPPH assay were used to study the antimicrobial activity and antioxidant potential of the Chs_fm, respectively. Accordingly, Chs_fm was smoother with fewer pores and flakes than Chs_c, and its crystallinity index was higher than Chs_c. The water content and thermal stability were lower and similar for Chs_fm compared to Chs_c. The average molecular mass of Chs_fm was ~ 5.8 kDa, making it classified as low molecular weight chitosan. The antimicrobial activity of Chs_fm against a representative Gram-negative bacteria; E. coli resulted to be the same as Chs_c. However, less effective than Chs_c against a representative Gram-positive bacteria is S. aureus. The Chs_fm/PVA ratio scaffold was optimized at 30:70 to fabricate a uniform nanofiber scaffold.

Biosynthesis MgO and ZnO nanoparticles using chitosan extracted from Pimelia Payraudi Latreille for antibacterial applications

Chitosan (CS) is one of the most abundant biopolymers in nature with superior properties such as biocompatibility, biodegradability, lack of toxicity, antimicrobial activity, acceleration of wound healing, and stimulation of the immune system. In this study, chitosan was extracted from the exoskeletons of beetles (Pimelia payraudi latreille) and then used for the biosynthesis of highly pure MgO NPs and ZnO NPs by a facile greener route. The extracted chitosan exhibited excellent physicochemical properties, including high extraction yield (39%), high degree of deacetylation (90%), low ash content (1%), high fat-binding capacity (366%), and unusual crystallinity index (51%). The MgO NPs and ZnO NPs exhibited a spherical morphology with crystallite sizes of 17 nm and 29 nm, particle sizes of about 20-70 nm and 30-60 nm, and band gap energies of 4.43 and 3.34 eV, respectively. Antibacterial assays showed that the extracted chitosan exhibited high antibacterial activity against Gram-positive and -negative bacteria, while ZnO NPs showed much stronger antibacterial activity against Gram-positive bacteria than against Gram-negative bacteria. For MgO NPs, the antibacterial activity against Gram-positive bacteria was lower than against Gram-negative bacteria. The results suggest that the synthesized MgO NPs and ZnO NPs are excellent antibacterial agents for therapeutic applications.

The Antibacterial Activity of Egyptian Wasp Chitosan-Based Nanoparticles against Important Antibiotic-Resistant Pathogens

The current work discusses the production and characterization of new biodegradable nanoparticles for biomedical applications based on insect chitosan. Chitosan has numerous features due to the presence of primary amine groups in repeating units, such as antibacterial and anticancer activities. When polyanion tripolyphosphate is added to chitosan, it creates nanoparticles with higher antibacterial activity than the original chitosan. In this study, the ionic gelation technique was used to make wasp chitosan nanoparticles (WCSNPs) in which TEM and FTIR were used to investigate the physicochemical properties of the nanoparticles. In addition, the antibacterial activities of chitosan nanoparticles against extended-spectrum beta-lactamase (ESBL)- and carbapenemase-producing Klebsiella pneumoniae, Escherichia coli, and Pseudomonas aeruginosa were evaluated. The extracted wasp chitosan exhibited high solubility in acetic acid and met all standard criteria of all characterization testes for nanoparticles; the zeta potential indicated stable WCSNPs capable of binding to cellular membrane and increasing the cellular uptake. The produced WCSNPs showed growth inhibition activity against all tested strains, and the bacterial count was lower than the initial count. The inhibition percent of WCSNPs showed that the lowest concentration of WCSNPs was found to be effective against tested strains. WCSNPs’ antibacterial activity implies that they could be used as novel, highly effective antibacterial agents in a variety of biological applications requiring antibacterial characteristics.

Chitosan: Sources, Processing and Modification Techniques

Chitosan, a copolymer of glucosamine and N-acetyl glucosamine, is derived from chitin. Chitin is found in cell walls of crustaceans, fungi, insects and in some algae, microorganisms, and some invertebrate animals. Chitosan is emerging as a very important raw material for the synthesis of a wide range of products used for food, medical, pharmaceutical, health care, agriculture, industry, and environmental pollution protection. This review, in line with the focus of this special issue, provides the reader with (1) an overview on different sources of chitin, (2) advances in techniques used to extract chitin and converting it into chitosan, (3) the importance of the inherent characteristics of the chitosan from different sources that makes them suitable for specific applications and, finally, (4) briefly summarizes ways of tailoring chitosan for specific applications. The review also presents the influence of the degree of acetylation (DA) and degree of deacetylation (DDA), molecular weight (M_w) on the physicochemical and biological properties of chitosan, acid-base behavior, biodegradability, solubility, reactivity, among many other properties that determine processability and suitability for specific applications. This is intended to help guide researchers select the right chitosan raw material for their specific applications.

Antimicrobial properties of chitosan from different developmental stages of the bioconverter insect Hermetia illucens

Growing antimicrobial resistance has prompted researchers to identify new natural molecules with antimicrobial potential. In this perspective, attention has been focused on biopolymers that could also be functional in the medical field. Chitin is the second most abundant biopolymer on Earth and with its deacetylated derivative, chitosan, has several applications in biomedical and pharmaceutical fields. Currently, the main source of chitin is the crustacean exoskeleton, but the growing demand for these polymers on the market has led to search for alternative sources. Among these, insects, and in particular the bioconverter Hermetia illucens, is one of the most bred. Chitin can be extracted from larvae, pupal exuviae and dead adults of H. illucens, by applying chemical methods, and converted into chitosan. Fourier-transformed infrared spectroscopy confirmed the identity of the chitosan produced from H. illucens and its structural similarity to commercial polymer. Recently, studies showed that chitosan has intrinsic antimicrobial activity. This is the first research that investigated the antibacterial activity of chitosan produced from the three developmental stages of H. illucens through qualitative and quantitative analysis, agar diffusion tests and microdilution assays, respectively. Our results showed the antimicrobial capacity of chitosan of H. illucens, opening new perspectives for its use in the biological area.

Edible Insects’ Transformation for Feed and Food Uses: An Overview of Current Insights and Future Developments in the Field

The integration of insect-derived extracts in feed and food products has become a field of growing interest in recent years. In this review, we collect different studies carried out on edible insects’ transformation processes and focus on the various treatment operations, extraction technologies, and solvents used in different processing steps. We include an overview of current insights into the different steps of the transformation process: insect reception, killing methods, pretreatments, storage, delipidation, protein extraction, as well as chitin and chitosan extraction. Finally, we reflect on the most important future challenges of this sector.

Characterization of chitin and chitosan derived from Hermetia illucens, a further step in a circular economy process

Due to their properties and applications, the growing demand for chitin and chitosan has stimulated the market to find more sustainable alternatives to the current commercial source (crustaceans). Bioconverter insects, such as Hermetia illucens, are the appropriate candidates, as chitin is a side stream of insect farms for feed applications. This is the first report on production and characterization of chitin and chitosan from different biomasses derived from H. illucens, valorizing the overproduced larvae in feed applications, the pupal exuviae and the dead adults. Pupal exuviae are the best biomass, both for chitin and chitosan yields and for their abundance and easy supply from insect farms. Fourier-transform infrared spectroscopy, X-ray diffraction and scanning electron microscope analysis revealed the similarity of insect-derived polymers to commercial ones in terms of purity and structural morphology, and therefore their suitability for industrial and biomedical applications. Its fibrillary nature makes H. illucens chitin suitable for producing fibrous manufacts after conversion to chitin nanofibrils, particularly adults-derived chitin, because of its high crystallinity. A great versatility emerged from the evaluation of the physicochemical properties of chitosan obtained from H. illucens, which presented a lower viscosity-average molecular weight and a high deacetylation degree, fostering its putative antimicrobial properties.

Effect of Chitosan-Poly(Acrylic Acid) Complexes and Two Nutrient Solutions on the Growth and Yield of Two Habanero Pepper Cultivars

Chitosan (CS) is a natural polymer used in agriculture as a biostimulant that has been evaluated in different plant models. In this study, we evaluated the effect of the foliar application of chitosan–poly(acrylic acid) complexes (CS–PAA) and two nutrient solutions (A and B) on the parameters of growth and yield of two habanero pepper cultivars (Chichen Itza and Jaguar) in a greenhouse. Over the course of the experiment, eight foliar applications were carried out at 15-day intervals. Our results showed that foliar applications of CS–PAA complexes have a biostimulant effect on the habanero pepper crop by increasing the total dry biomass of the plant and the number of fruits of the two cultivars. Regarding nutrient solutions, the nutrient solution A increased the yield of the Chichen Itza cultivar; this effect was because it had a better balance of potassium and calcium compared to the nutrient solution B. These results provide advances on the use of CS–PAA complexes as a biostimulant and the management of nutrient solutions in the crop of habanero peppers.

Advances in Modification Methods Based on Biodegradable Membranes in Guided Bone/Tissue Regeneration: A Review

Guided tissue/bone regeneration (GTR/GBR) is commonly applied in dentistry to aid in the regeneration of bone/tissue at a defective location, where the assistive material eventually degrades to be substituted with newly produced tissue. Membranes separate the rapidly propagating soft tissue from the slow-growing bone tissue for optimal tissue regeneration results. A broad membrane exposure area, biocompatibility, hardness, ductility, cell occlusion, membrane void ratio, tissue integration, and clinical manageability are essential functional properties of a GTR/GBR membrane, although no single modern membrane conforms to all of the necessary characteristics. This review considers ongoing bone/tissue regeneration engineering research and the GTR/GBR materials described in this review fulfill all of the basic ISO requirements for human use, as determined through risk analysis and rigorous testing. Novel modified materials are in the early stages of development and could be classified as synthetic polymer membranes, biological extraction synthetic polymer membranes, or metal membranes. Cell attachment, proliferation, and subsequent tissue development are influenced by the physical features of GTR/GBR membrane materials, including pore size, porosity, and mechanical strength. According to the latest advances, key attributes of nanofillers introduced into a polymer matrix include suitable surface area, better mechanical capacity, and stability, which enhances cell adhesion, proliferation, and differentiation. Therefore, it is essential to construct a bionic membrane that satisfies the requirements for the mechanical barrier, the degradation rate, osteogenesis, and clinical operability.

Adsorption properties of heavy metals and antibiotics by chitosan from larvae and adult Trypoxylus dichotomus

Chitosan was prepared by hydrothermal deacetylation from multi-step protein purification chitin based on Trypoxylus dichotomus, for treating heavy metals and antibiotics. Chitosan with higher deacetylation degree and lower molecular weight were synthesized. The adult chitosan was composed of nanofibers arranged more evenly, showing higher yield, thermal stabilities and antimicrobial properties. The adsorption capacities of Cu²⁺ and Fe³⁺ were 462 and 270 mg/g, lower than 934 mg/g of Pb²⁺. Levofloxacin and tetracycline hydrochloride adsorption capacity were 26 and 22 mg/g, lower than 67 mg/g of sulfamethoxazole. In addition, compared with single pollutants, the adsorption of sulfamethoxazole and Pb²⁺ can increase by 6% and 5% when they act as composite contaminants. The adsorption procedure can be well described by pseudo-second-order kinetics and Langmuir isothermal model, indicating it a homogeneous monolayer chemisorption. Therefore, the Trypoxylus dichotomus source chitosan prepared by hydrothermal deacetylation has potential applications in the adsorption of complex pollutants.

Antimicrobial Activity of Chemically and Biologically Treated Chitosan Prepared from Black Soldier Fly (Hermetia illucens) Pupal Shell Waste

Globally, the broad-spectrum antimicrobial activity of chitin and chitosan has been widely documented. However, very little research attention has focused on chitin and chitosan extracted from black soldier fly pupal exuviae, which are abundantly present as byproducts from insect-farming enterprises. This study presents the first comparative analysis of chemical and biological extraction of chitin and chitosan from BSF pupal exuviae. The antibacterial activity of chitosan was also evaluated. For chemical extraction, demineralization and deproteinization were carried out using 1 M hydrochloric acid at 100 °C for 2 h and 1 M NaOH for 4 h at 100 °C, respectively. Biological chitin extraction was carried out by protease-producing bacteria and lactic-acid-producing bacteria for protein and mineral removal, respectively. The extracted chitin was converted to chitosan via deacetylation using 40% NaOH for 8 h at 100 °C. Chitin characterization was done using FTIR spectroscopy, while the antimicrobial properties were determined using the disc diffusion method. Chemical and biological extraction gave a chitin yield of 10.18% and 11.85%, respectively. A maximum chitosan yield of 6.58% was achieved via chemical treatment. From the FTIR results, biological and chemical chitin showed characteristic chitin peaks at 1650 and 1550 cm⁻¹—wavenumbers corresponding to amide I stretching and amide II bending, respectively. There was significant growth inhibition for Escherichia coli, Bacillus subtilis,Pseudomonas aeruginosa,Staphylococcus aureus, and Candida albicans when subjected to 2.5 and 5% concentrations of chitosan. Our findings demonstrate that chitosan from BSF pupal exuviae could be a promising and novel therapeutic agent for drug development against resistant strains of bacteria.

Terrestrial insects as a promising source of chitosan and recent developments in its application for various industries

Chitosan is a deacetylated form of chitin and increasingly important amino-polysaccharide used in many various sectors including agriculture, food, and biomedicine. However, chitosan from marine sources has several adverse effects, including allergenic components harmful to human health. Furthermore, marine resources are seasonal, and availability is limited due to dependency on environmental conditions and climate change. In addition, shell infection in crustaceans and environmental contamination make the harvesting of chitin and chitosan problematic. In recent years, chitosan from terrestrial insects has attracted considerable interest. The discoveries show insect chitosan is more advantageous compared to crustacean chitosan. In addition, we were unable to find any literature about the adverse effects of insect chitosan thus far. This review aims to reveal information regarding crustacean and terrestrial insect chitosan and recent advances in chitosan sources. Applications from specific insect orders and perspectives for further study will also be highlighted, including medical and sensing applications.

Insect Chitin-Based Nanomaterials for Innovative Cosmetics and Cosmeceuticals

Chitin and its derivatives are attracting great interest in cosmetic and cosmeceutical fields, thanks to their antioxidant and antimicrobial properties, as well as their biocompatibility and biodegradability. The classical source of chitin, crustacean waste, is no longer sustainable and fungi, a possible alternative, have not been exploited at an industrial scale yet. On the contrary, the breeding of bioconverting insects, especially of the Diptera Hermetia illucens, is becoming increasingly popular worldwide. Therefore, their exoskeletons, consisting of chitin as a major component, represent a waste stream of facilities that could be exploited for many applications. Insect chitin, indeed, suggests its application in the same fields as the crustacean biopolymer, because of its comparable commercial characteristics. This review reports several cosmetic and cosmeceutical applications based on chitin and its derivatives. In this context, chitin nanofibers and nanofibrils, produced from crustacean waste, have proved to be excellent cosmeceutical active compounds and carriers of active ingredients in personal care. Consequently, the insect-based chitin, its derivatives and their complexes with hyaluronic acid and lignin, as well as with other chitin-derived compounds, may be considered a new appropriate potential polymer to be used in cosmetic and cosmeceutical fields.

Physicochemical Properties of Chitosan from Two Commonly Reared Edible Cricket Species, and Its Application as a Hypolipidemic and Antimicrobial Agent

Insect-derived chitin and chitosan have gained interest as alternative sources to that derived from crustaceans; however, little information is available on chitin from the house cricket (Acheta domesticus) and tropical banded cricket (Gryllodes sigillatus), two cricket species commonly reared in the United States for human consumption. In this study, chitin was successfully isolated and purified from these two cricket species; using FTIR, chitins were found to be in alpha-crystalline form. Cricket chitosan was produced from both species with varying degrees of deacetylation (DDA) by varying alkaline conversion duration. G. sigillatus chitosan was larger (524 kDa) than A. domesticus chitosan (344 kDa). Both cricket chitosans showed similar (p > 0.05) lipid-binding capacity to that of shrimp chitosan. Both chitosans were as effective at inhibiting microbial growth of surrogate foodborne pathogens as the commercial shrimp chitosan. At a concentration of 0.50 mg/mL cricket chitosan, approximately 100% of Listeria innocua growth was inhibited, due to a contribution of both chitosan and the solvent-acetic acid. At the same concentration, growth of Escherichia coli was inhibited 90% by both cricket chitosan samples with ~80% DDA, where a decrease in the DDA led to decreased antimicrobial activity. However, varying the DDA had no effect on chitosan’s lipid-binding capacity. As more edible insects become a normalized protein source in our diet, the use of by-products, such as chitin and chitosan, derived from insect protein processing, show promising applications for the pharmaceutical and food industries.

Proteomics and ultrastructural analysis of Hermetia illucens (Diptera: Stratiomyidae) larval peritrophic matrix

BACKGROUND

The black soldier fly (Hermetia illucens) has significant economic potential. The larvae can be used in financially viable waste management systems, as they are voracious feeders able to efficiently convert low-quality waste into valuable biomass. However, most studies on H. illucens in recent decades have focused on optimizing their breeding and bioconversion conditions, while information on their biology is limited.

METHODS

About 200 fifth instar well-fed larvae were sacrificed in this work. The liquid chromatography-tandem mass spectrometry and scanning electron microscopy were employed in this study to perform a proteomic and ultrastructural analysis of the peritrophic matrix (PM) of H. illucens larvae.

RESULTS

A total of 565 proteins were identified in the PM samples of H. illucen, of which 177 proteins were predicted to contain signal peptides, bioinformatics analysis and manual curation determined 88 proteins may be associated with the PM, with functions in digestion, immunity, PM modulation, and others. The ultrastructure of the H. illucens larval PM observed by scanning electron microscopy shows a unique diamond-shaped chitin grid texture.

CONCLUSIONS

It is the first and most comprehensive proteomics research about the PM of H. illucens larvae to date. All the proteins identified in this work has been discussed in details, except several unnamed or uncharacterized proteins, which should not be ignored and need further study. A comparison of the ultrastructure between H. illucens larval PM and those of other insects as observed by SEM indicates that the PM displays diverse textures on an ultra-micro scale and we suscept a unique diamond-shaped chitin grid texture may help H. illucens larval to hold more food. This work deepens our understanding of the molecular architecture and ultrastructure of the H. illucens larval PM.

Local drug delivery systems as therapeutic strategies against periodontitis: A systematic review

Periodontitis is a chronic inflammation of the soft tissue surrounding and supporting the teeth, which causes periodontal structural damage, alveolar bone resorption, and even tooth loss. Its prevalence is very high, with nearly 60% of the global population affected. Hence, periodontitis is an important public health concern, and the development of effective healing treatments for oral diseases is a major target of the health sciences. Currently, the application of local drug delivery systems (LDDS) as an adjunctive therapy to scaling and root planning (SRP) in periodontitis is a promising strategy, giving higher efficacy and fewer side effects by controlling drug release. The cornerstone of successful periodontitis therapy is to select an appropriate bioactive agent and route of administration. In this context, this review highlights applications of LDDS with different properties in the treatment of periodontitis with or without systemic diseases, in order to reveal existing challenges and future research directions.

Enhancing the specificity of chitin determinations through glucosamine analysis via ultra-performance LC-MS

As chitin is gaining an increased attention as feedstock for industry, quantification thereof is becoming increasingly important. While gravimetric procedures are long, not specific and highly labour-intensive, acidic hydrolysis of chitin into glucosamine followed by quantification of the latter is more performant. Even though several quantification procedures for the determination of chitin can be found in the literature, they give inconsistent results and their accuracy was not assessed due to the lack of certified analytical standards. Therefore, in the present study, commercially available chitin from practical grade was characterised in detail, allowing the assessment of method accuracy. The procedure for the hydrolysis of chitin into glucosamine and subsequent quantification via UPLC-MS was investigated in detail as well. Using 9-fluorenylmethyl chloroformate (FMOC-Cl) as derivatisation reagent, glucosamine was quantified using reversed-phase chromatography. For the chitin hydrolysis, the highest glucosamine recovery was obtained with 8.0 M HCl for 2 h at 100 °C. The entire procedure for chitin quantification, including the hydrolysis, was characterised by high interday and intraday precision and accuracy. The specificity of the procedure was assessed as well by analysing different mixtures of cellulose and chitin. Chitin recoveries from these analyses ranged from 98.8 to 105.8% while no signal was observed for 100% cellulose, indicating the high specificity of the procedure. It was also concluded that the procedure is much faster and less labour-intensive compared to the gravimetric procedure.

Current trends and challenges in the synthesis and applications of chitosan-based nanocomposites for plants: A review

Chitosan, a low-cost and multipurpose polymer with numerous desired physicochemical and biological properties has been tested for various applications in agriculture, pharmacy, and biomedicine industries. The availability of functional groups along the backbone makes chitosan readily available for other polymers and metal ions to form bio-nanocomposites. Different types of chitosan-based nanocomposites have been designed and tested for the enhancement of chitosan efficiency and ultimately widening the application areas of chitosan in plants. These nanocomposites serve different purposes such as eliciting plant's defence systems against different threats (pathogen attack), antimicrobial agent against bacteria, fungi and viruses, enhancement of nutrient uptake by plants, control release of micro/macronutrients, fungicides and herbicides. In this review, an extensive outlook has been provided (mainly in the last five years) to recent trends and advances in the fabrication and application of chitosan-based composites. Finally, current challenges and future development opportunities of chitosan-based nanocomposites for plants are discussed.

Antibacterial Bio-Based Polymers for Cranio-Maxillofacial Regeneration Applications

Cranio-maxillofacial structure is a region of particular interest in the field of regenerative medicine due to both its anatomical complexity and the numerous abnormalities affecting this area. However, this anatomical complexity is what makes possible the coexistence of different microbial ecosystems in the oral cavity and the maxillofacial region, contributing to the increased risk of bacterial infections. In this regard, different materials have been used for their application in this field. These materials can be obtained from natural and renewable feedstocks, or by synthetic routes with desired mechanical properties, biocompatibility and antimicrobial activity. Hence, in this review, we have focused on bio-based polymers which, by their own nature, by chemical modifications of their structure, or by their combination with other elements, provide a useful antibacterial activity as well as the suitable conditions for cranio-maxillofacial tissue regeneration. This approach has not been reviewed previously, and we have specifically arranged the content of this article according to the resulting material and its corresponding application; we review guided bone regeneration membranes, bone cements and devices and scaffolds for both soft and hard maxillofacial tissue regeneration, including hybrid scaffolds, dental implants, hydrogels and composites.

Obtaining chitin, chitosan and their melanin complexes from insects

Interest in insects as a source of valuable biologically active substances has significantly increased over the past few years. Insects serve as an alternative source of chitin, which forms up to 40% of their exoskeleton. Chitosan, a deacetylated derivative of chitin, attracts the attention of scientists due to its unique properties (sorption, antimicrobial, film-forming, wound healing). Furthermore, some insect species are unique and can be used to obtain chitin- and chitosan-melanin complexes in the later stages of ontogenesis. Due to the synergistic effect, chitosan and melanin can enhance each other's biological activity, providing a wide range of potential applications.

Extraction, physicochemical characterization, and morphological properties of chitin and chitosan from cuticles of edible insects

As an alternative, cuticles from edible insects was proposed as an unconventional but viable source of chitin and chitosan. The chitin present in the mealworm's (Tenebrio molitor) cuticles was obtained biotechnologically in one step of enzymatic deproteinization and after deacetylated. Differences in the physicochemical characteristics and the properties of the cuticles, chitin, and chitosan were investigated in this study. Commercial chitosan was used as a reference sample to validate the methods used. The enzymatic deproteinization used to obtain chitin showed an efficiency of 85%. The global yield of the process (cuticle-to-chitosan) was 31.9%. The characterization results of these polymers using DSC, FT-IR, XRD, TGA, and SEM techniques demonstrate consistency with the degree of deacetylation of the obtained chitosan, allowing the differentiation between chitin and chitosan. This study suggests that the wastes of edible insect breeding should be collected and evaluated as an alternative of chitin/chitosan source.

Insight into Physicochemical, Rheological, and Antibacterial Properties of Chitosan Extracted from Antarctic krill: A Comparative Study

In this work, physicochemical, rheological, and antibacterial properties of chitosan (CS) extracted from white shrimp (WS), giant river prawn (GP), and Antarctic krill (AK) were investigated. The results demonstrated that molecular weight (MW) of commercial chitosan (CCS), WSCS, GPCS, and AKCS were 1175.8, 2130.4, 1293.3, and 1109.3 kDa with the degree of deacetylation (DDA) of 73.5, 74.1, 82.1, and 75.9%, respectively. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and scanning electron microscope (SEM) were employed to study the structural differences of CS. Moreover, storage modulus (G′) and loss modulus (G″) of AKCS were lower than that of WSCS and GPCS, respectively, but higher than that of CCS. Minimum inhibitory concentration (MIC) and minimum bacterial concentration (MBC) of CS against Escherichia coli and Staphylococcus aureus were investigated at concentration between 0.0125 and 1 mg/mL. These results highlighted that AKCS with low viscoelastic properties had a potential application in food and pharmaceutical application.

Recent insights into the extraction, characterization, and bioactivities of chitin and chitosan from insects

Background

Insects are a living resource used for human nutrition, medicine, and industry. Several potential sources of proteins, peptides, and biopolymers, such as silk, chitin, and chitosan are utilized in industry and for biotechnology applications. Chitosan is an amino-polysaccharide derivative of chitin that consists of linear amino polysaccharides with d-glucosamine and N-acetyl-d-glucosamine units. Currently, the chief commercial sources of chitin and chitosan are crustacean shells that accumulate as a major waste product from the marine food industry. Existing chitin resources have some natural challenges, including insufficient supplies, seasonal availability, and environmental pollution. As an alternative, insects could be utilized as unconventional but feasible sources of chitin and chitosan.

Scope and approach

This review focuses on the recent sources of insect chitin and chitosan, particularly from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, and Odonata orders. In addition, the extraction methods and physicochemical characteristics are discussed. Insect chitin and chitosan have numerous biological activities and could be used for food, biomedical, and industrial applications.

Key findings and conclusions

Recently, the invasive and harmful effects of insect species causing severe damage in agricultural crops has led to great economic losses globally. These dangerous species serve as potential sources of chitin and are underutilized worldwide. The conclusion of the present study provides better insight into the conversion of insect waste-derived chitin into value-added products as an alternative chitin source to address food security related challenges.

Micromorphological details and identification of chitinous wall structures in Rapana venosa (Gastropoda, Mollusca) egg capsules

The present study evaluated the structural and ultrastructural characteristics of Rapana venosa egg capsules, starting from observations of their antifouling activity and mechanical resistance to water currents in mid-shore habitats. Optical microscopy, epifluorescence, and electron microscopy were used to evaluate the surface and structure of the R. venosa egg capsules. These measurements revealed an internal multilamellar structure of the capsule wall with in-plane distributions of layers with various orientations. It was found that the walls contained vacuolar structures in the median layer, which provided the particular characteristics. Mechanical, viscoelastic and swelling measurements were also carried out. This study revealed the presence and distribution of chitosan in the capsule of R. venosa. Chitosan identification in the egg capsule wall structure was carried out through SEM-EDX measurements, colorimetric assays, FT-IR spectra and physical-chemical tests. The biopolymer presence in the capsule walls may explain the properties of their surfaces as well as the mechanical resistance of the capsule and its resistance to chemical variations in the living environment.

Chitin and its derivatives: Structural properties and biomedical applications

Chitin, a polysaccharide that occurs abundantly in nature after cellulose, has attracted the interest of the scientific community due to its plenty of availability and low cost. Mostly, it is derived from the exoskeleton of insects and marine crustaceans. Often, it is insoluble in common solvents that limit its applications but its deacetylated product, named chitosan is found to be soluble in protonated aqueous medium and used widely in various biomedical fields. Indeed, the existence of the primary amino group on the backbone of chitosan provides it an important feature to modify it chemically into other derivatives easily. In the present review, we present the structural properties of chitin, and its derivatives and highlighted their biomedical implications including, tissue engineering, drug delivery, diagnosis, molecular imaging, antimicrobial activity, and wound healing. We further discussed the limitations and prospects of this versatile natural polysaccharide.

The Potential of Insects as Alternative Sources of Chitin: An Overview on the Chemical Method of Extraction from Various Sources

Chitin, being the second most abundant biopolymer after cellulose, has been gaining popularity since its initial discovery by Braconot in 1811. However, fundamental knowledge and literature on chitin and its derivatives from insects are difficult to obtain. The most common and sought-after sources of chitin are shellfish (especially crustaceans) and other aquatic invertebrates. The amount of shellfish available is obviously restricted by the amount of food waste that is allowed; hence, it is a limited resource. Therefore, insects are the best choices since, out of 1.3 million species in the world, 900,000 are insects, making them the most abundant species in the world. In this review, a total of 82 samples from shellfish—crustaceans and mollusks (n = 46), insects (n = 23), and others (n = 13)—have been collected and studied for their chemical extraction of chitin and its derivatives. The aim of this paper is to review the extraction method of chitin and chitosan for a comparison of the optimal demineralization and deproteinization processes, with a consideration of insects as alternative sources of chitin. The methods employed in this review are based on comprehensive bibliographic research. Based on previous data, the chitin and chitosan contents of insects in past studies favorably compare and compete with those of commercial chitin and chitosan—for example, 45% in Bombyx eri, 36.6% in Periostracum cicadae (cicada sloughs), and 26.2% in Chyrysomya megacephala. Therefore, according to the data reported by previous researchers, demonstrating comparable yield values to those of crustacean chitin and the great interest in insects as alternative sources, efforts towards comprehensive knowledge in this field are relevant.

Extraction and Physicochemical Characterization of Chitin from Cicada orni Sloughs of the South-Eastern French Mediterranean Basin

Chitin is a structural polysaccharide of the cell walls of fungi and exoskeletons of insects and crustaceans. In this study, chitin was extracted, for the first time in our knowledge, from the Cicada orni sloughs of the south-eastern French Mediterranean basin by treatment with 1 M HCl for demineralization, 1 M NaOH for deproteinization, and 1% NaClO for decolorization. The different steps of extraction were investigated by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM). Results demonstrated that the extraction process was efficiently performed and that Cicada orni sloughs of the south-eastern French Mediterranean basin have a high content of chitin (42.8%) in the α-form with a high degree of acetylation of 96% ± 3.4%. These results make Cicada orni of the south-eastern French Mediterranean basin a new and promising source of chitin. Furthermore, we showed that each step of the extraction present specific characteristics (for example FTIR and XRD spectra and, consequently, distinct absorbance peaks and values of crystallinity as well as defined values of maximum degradation temperatures identifiable by TGA analysis) that could be used to verify the effectiveness of the treatments, and could be favorably compared with other natural chitin sources.

The physicochemical properties of chitosan prepared by microwave heating

The aim of this study was to compare the physicochemical properties of chitosan prepared by microwave and water bath heating with an equivalent quantity of heat intake. The structure and physicochemical properties of the chitosan obtained by these two methods were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), gel permeation chromatography (GPC), and scanning electron microscopy (SEM). The FTIR and XRD patterns show that there was no significant difference in the structure of chitosan produced by the two heat sources. The results showed that chitosan with 73.86% deacetylation was successfully prepared by microwave heating within 60 min, while a longer time of 180 min was required for the preparation of chitosan with the same deacetylation degree (74.47%) using the conventional heating method under the same heating rate. Even under the same temperature conditions, microwave technology can greatly reduce the reaction time by approximately 1/3, while the chitosan produced by microwaves can obtain relatively low molecular weight and viscosity. These results showed that microwaves may efficiently promote complete chemical reactions by the friction heating mechanism generated by molecular vibration beyond a rapid heating source, turning into a more efficient, energy-saving, and environmentally friendly method for the further use of rigid shrimp shells and highly crystalline crustacean materials.

Circular manufacturing of chitinous bio-composites via bioconversion of urban refuse

Bioinspired manufacturing, in the sense of replicating the way nature fabricates, may hold great potential for supporting a socioeconomic transformation towards a sustainable society. Use of unmodified ubiquitous biological components suggests for a fundamentally sustainable manufacturing paradigm where materials are produced, transformed into products and degraded in closed regional systems with limited requirements for transport. However, adoption is currently limited by the fact that despite their ubiquitous nature, these biopolymers are predominantly harvested as industrial and agricultural products. In this study, we overcome this limitation by developing a link between bioinspired manufacturing and urban waste bioconversion. This result is paramount for the development of circular economic models, effectively connecting the organic by-products of civilization to locally decentralized, general-purpose manufacturing.